Related
I do a lot of ROM flashing, and it is a pain to have to reinstall all my apps one by one after each flash. Previously, I was using the AutoRun utility to install my apps by simply running it after each flash; however, it's problem was that it is only able to install into main memory - not a storage card.
So what I would need is an auto installer that will: (1) Let you configure it manually beforehand; (2) Allow you to not only install to main memory but also to a storage card; (3) Also allows you to install registry items (i.e. can install a previously pulled owner information registry entry); and (4) Doesn't have to be 'cooked' into a ROM - but rather something I can setup on a flash card and then run it myself after I flash a new ROM. It would also be nice if it were simple to use (as by using a file folder structure to store installers, or my using a manually modified list).
Anything like this exist? I looked thru many threads but didn't really see anything that had all my points above.
Thanks in advance.
Cooked-in UC meets a couple, but not all, of your requirements.
Also, this post does not belong here. It belongs in the Q/A section: http://forum.xda-developers.com/forumdisplay.php?f=456
SASHIMI..............
Install express is the best tool for me
see here : http://forum.xda-developers.com/showthread.php?t=514934
I agree on SASHIMI !
So far that gives me everything I want. Copy file automaticly, install cabs (device or storage, you can decide), install reg files, provisioning xml files. It's great!
Before: Updating ROM would mean taking the night off
After: Within 10 mins I'm 100% up and running.
You need to invest a bit of time to set everything up (like backing up owner info and regional settings etc). But once you fully made it the way you want a ROM upgrade is really a simple painless process. *
*disclaimer: all depends on how 'complicated' your complete install is eh
Dear developers,
I have deleted (by mistake) program Launcer from my Smartphone and now it is not going to load. When I turn on it, there is only symbol of IDEOS. After a minute symbol starting to twinkle, but system not loading.
Could you please tell me how can I return to original firmware?
I hope someone will be able to support me.
If the launcher is the problem, you can just install another, or push again the original from a rom via adb. I assume that the device is rooted(I think you cannot delete a system app if isn´t). If you can connect to pc, then possibly you can install a launcher from huawei' s suite(I´m not sure because I don' t use windows and I haven't try this app) or from a android file manager like QtADB, Android commander or Droid Explorer. You can also install it only with adb via windows command prompt:
http://www.brighthub.com/mobile/google-android/articles/37151.aspx
And maybe, if wifi is enabled and connected, you can just install a launcher from market via pc' s web browser:
https://market.android.com/
The Modaco wiki has a list of original firmwares, but no link to Huawei works anymore. However, it is possible to download the latest China Unicom firmware - which does contain english language support. That should at least get you started.
As a new user I can't post links yet, but it is easy to find if you look for u8800 software, and then switch to Chinese.
Put the extracted directory (dload) on an sd card, in the top/root, put it in the phone and then hold volume down and power on.
Note, this will blow everything away to start from scratch so make sure it is what you want. In addition everything will be in Chinese so you need to be able to navigate to the settings to set it to English.
Better ideas? I am a noob myself so no guarantees...
I have unrooted it before to delete some trial games. And deleted Launcher by mistake.
I can't connect via usb now.
I'm afraid if I upgrade firmware, I have less memory because old one will not be deleted. Or maybe I'm wrong?
No, you're not gonna have less memory.
Did you tried to wipe to factory defaults from recovery mode(power button and vol+)?
You will not have less space because an original firware will format everything from boot partition, system and data... Basically , it will give you original software and status like it came from factory ... Like the other user said, jut find it, extract it , put the dload directory to the root of you sd card and hold volume down and start up the phone ... You will see a progress bar and when it is finished , the phone will restart itself, you will have to wait longer due to the creation of new files and there you go
vladislavnm said:
I have unrooted it before to delete some trial games. And deleted Launcher by mistake.
I can't connect via usb now.
I'm afraid if I upgrade firmware, I have less memory because old one will not be deleted. Or maybe I'm wrong?
Click to expand...
Click to collapse
Install recovery first, then you can connect your device to PC using recovery. If you have friend that have X5, copy the launcher. Else, just install Custom ROM.
The old one will be removed if you install custom ROM. If I'm not wrong.
Recovery.
Unplug USB, turn off your phone, press and hold vol + and -, then press power. Hold those three buttons until it turned on and the screen is purple-pink.
Backup all image data(copy). The rest is in the link.
Sorry for my English. Hope you understand what I write..
dancer_69 said:
No, you're not gonna have less memory.
Did you tried to wipe to factory defaults from recovery mode(power button and vol+)?
Click to expand...
Click to collapse
You are magician. it works now.
hmmm... but there is no launcher application - no workspace available. it doesn't want to load as before. strange.
upgrade don't work too. It is cycle repeating of step1/2.
I just tested and found that you can copy the missing apk from bootloader mode. In this mode(power + vol- + vol+ buttons), when connected to pc via usb cable all partitions of device mounted(at least this happens on linux). So, you can navigate to system partition on /system/app folder and copy there the missing launcher' s apk file. You can find this file on a custom' s rom(or on an official' s rooted rom like modaco's roms) update.zip file. It's on system/app folder. I tested this on linux and I could(not as normal but as root user though) copy or delete files from there.
dancer_69, thank you for your support. At my side when I connect via bootmode, there is only flashdrive is visible.
It's really strange that it is not going to upgrade.
I'm able to apply sdcard:update.zip. So maybe if to put this application inside of the card, it could install. but I don't know how to do it.
I finded apk file and tried to install it but it don't receive file because it hasn't some certificate. ???
I think you have 3 options here.
1. flash an official rom(you put the dload folder of rom's zip file on root of sdcard and boot to bootloader mode. The update starts automatic)
2. Use a linux system(maybe a livecd) to access the other partitions.
3. Try to reroot the device from pc, via superoneclick app(you can find it here), so to have access to system again.
but I haven't access to installation program area. nothing!
I have only ability by pressing (vol + and on) to choose install update.zip from flash card.
so.
1. when I runned new firmware from dload it didn't install. it was cycling at first level (1/2)
2. linux is good idea. but I'm not sure that it's will be profitable. maybe I have turned off access to partitions inside of phone
3. I can't install superoneclick as I'm not able to install any application.
I hope we are closer to some geniously idea. I have bought phone yesterday and we haven't service center in our city. So, I need to buy the other one.
This is not so serious problem, it' s not hardware, it´ software related. And I think you cannot turn off access so easy.
The superoneclick is a pc application. You don't need to install something on device(if I remember well, because I use it once before a long time). You can try it.
And you can try linux too.
I don't think that this is a problem that only service can solve it.
What firmware you tried? Try another one. And better try to find the one that you device has(if you know it)
Thank you for positive opinion.
1. Will try to change firmware as you said. Try 2 more firmware from Huawei.
2. Superoneclick needs approval from phone, today night I wasn't able to run it.
3. I'll try Linux too.
dancer_69 said:
This is not so serious problem, it' s not hardware, it´ software related. And I think you cannot turn off access so easy.
The superoneclick is a pc application. You don't need to install something on device(if I remember well, because I use it once before a long time). You can try it.
And you can try linux too.
I don't think that this is a problem that only service can solve it.
What firmware you tried? Try another one. And better try to find the one that you device has(if you know it)
Click to expand...
Click to collapse
Thank you very much for your excellent support. It's work now after trying of other firmware. Everything is excellent now.
I only noticed that battery is no very capacitive.
Please, send me your paypal account, I want to donate you a little.
Hi all!
I was just wanting to see what other people were using as their metro wallpaper. I was getting bored of the old ones I made and I was still using the consumer preview imageres file so I just started over for the release preview.
Here is my current one (ignore the break in the middle, its just more of the same starfield). Looking forward to seeing what other people are using so that I can steal it
How do you crate that ... it's beautiful
You change the imageres.dll file.
This isn't the exact walkthrough that I used, but it is similar enough (it is in italian so you may need to translate.
http://windows8italia.forumfree.it/?t=60566861
Then it is just a matter of finding an image you like and splitting it in half in a logical way.
I see that someone is following my guides.
This is my first post here and I did not imagine finding this my guide
This guide I made on the Consumer Preview, however, also works on Relase Preview.
If there are errors or incomprehensions let me know
Pasquiindustry said:
I see that someone is following my guides.
This is my first post here and I did not imagine finding this my guide
This guide I made on the Consumer Preview, however, also works on Relase Preview.
If there are errors or incomprehensions let me know
Click to expand...
Click to collapse
Yep it is a great guide. :victory:
The other one that I had used before was on Tweakscene but all of the good stuff seems to be behind a paywall now. There was another one that I had used in the past on a chinese site, but I don't even know how I got there in the first place, let alone how to find it again.
tanders04 said:
Yep it is a great guide. :victory:
The other one that I had used before was on Tweakscene but all of the good stuff seems to be behind a paywall now. There was another one that I had used in the past on a chinese site, but I don't even know how I got there in the first place, let alone how to find it again.
Click to expand...
Click to collapse
Thanks a lot
There are many things to do to improve Windows 8 more ...
This, however, was one of my first guides, and, I repeat, I had written when there was still the CP.
If there are "Resource Editor" that double as command, I could make a more automated little program for customizing the start-screen, although it is very difficult ...
It looks very nice.
Any way to do this without a dual-boot setup? I tried safe mode and the dll is still in use.
groovedexter said:
Any way to do this without a dual-boot setup? I tried safe mode and the dll is still in use.
Click to expand...
Click to collapse
Unfortunately I think it's difficult to do this with Windows only 8 to edit.
You need at least another Operating System that is able to read NTFS partitions, or you must use the CD of Windows Vista / 7
I could think of to "take ownership" and the popular program "unlocker" but I think they can do little on 'OS to change.
Since we all have, I believe, the DVD of Windows 8 (CP or RP), I could find a way to use that. I have to do some small tests first.
Unfortunately the installation DVD of Windows 8 is different from that of Vista / 7 and has been removed according to navigate through files, I'll try and see
[edit]
Ok, I found a way to use the DVD of Windows 8.
In a little 'I'll do a article on my site of the guide and get better compared to the one linked, making it easier and more complete and adapting to the new method and the RP
Stay tuned
p.s. If there are criticisms and suggestions, tell me, so I can make a better guide for you
Pasquiindustry said:
Unfortunately I think it's difficult to do this with Windows only 8 to edit.
You need at least another Operating System that is able to read NTFS partitions, or you must use the CD of Windows Vista / 7
I could think of to "take ownership" and the popular program "unlocker" but I think they can do little on 'OS to change.
Since we all have, I believe, the DVD of Windows 8 (CP or RP), I could find a way to use that. I have to do some small tests first.
Unfortunately the installation DVD of Windows 8 is different from that of Vista / 7 and has been removed according to navigate through files, I'll try and see
[edit]
Ok, I found a way to use the DVD of Windows 8.
In a little 'I'll do a article on my site of the guide and get better compared to the one linked, making it easier and more complete and adapting to the new method and the RP
Stay tuned
p.s. If there are criticisms and suggestions, tell me, so I can make a better guide for you
Click to expand...
Click to collapse
I do it all within windows 8. I don't think it is too difficult.
Here is what I do:
1. Swipe to the charm and go to settings -> change pc settings -> general -> advance start-up options.
2. Once you restart you'll see three metro-esq icons (continue, troubleshoot, turn off PC). Select troubleshoot -> advanced options -> start-up settings.
3. The computer will restart again and you'll get your various start-up options. Select #6. Safe mode with comand prompt.
4. At the cmd prompt take ownership of imageres.dll (takeown /f C:\windows\system32\imagres.dll
5. Restart and go into the system 32 folder on the PC and copy find the imageres.dll file.
6. Right click and change to the security tab and check the box for full control.
7. Copy the file to the desktop or where ever you want to work on it.
8. Change the file with resource hacker as described above to insert your images.
9. Go back to the advance reset options and reset back into safe mode with the cmd prompt. Copy the file from your desktop (or where ever) back to the system 32 folder. (copy c:\users\[user name]\desktop\imageres.dll c:\windows\system32)
You should get confirmation asking to overwrite the file and if the permissions were set correctly you'll get confirmation that the file was copied. When you reset the computer you'll see the new theme in the settings menu.
Good luck!
4. At the cmd prompt take ownership of imageres.dll (takeown /f C:\windows\system32\imagres.dll
Click to expand...
Click to collapse
9. Go back to the advance reset options and reset back into safe mode with the cmd prompt. Copy the file from your desktop (or where ever) back to the system 32 folder. (copy c:\users\[user name]\desktop\imageres.dll c:\windows\system32)
Click to expand...
Click to collapse
I did not think that the "take ownership" really worked
I thought the file imageres.dll was blocked by Windows as a process and not just as a library-resource
good to know
Hey guys,
I made this this afternoon. I wanted something different from the rest that didn't steer too far away from the "norm" that didn't look tacky. gosh there are some really tacky wallpapers getting around.
Anyway I am not even sure any of you will even like this, I am not sure if I even like it yet .....it's growing on me I guess?
CustomEdgeFavs helps you to extend the functionalities of Microsoft Edge by adding the bookmarklet features.
I've created two variants: the "Desktop" edition for Windows 10 PC and the "UWP" edition for Windows 10 Mobile.
They're quite similar, the only big difference is that Windows 10 Mobile needs an initial configuration to work.
UWP EDITION - INSTALLATION ON WINDOWS 10 MOBILE (DON'T USE ON DESKTOP)
1. Extract the zip file
2. Copy the files within your phone
3. From the File Manager on the phone, open the only appxbundle available and confirm
4. Wait some seconds: the app will appear within the app list
IMPORTANT TIPS AND ADVICES, READ CAREFULLY!!!
1. If you're having some permission problems while saving the lnk file, you can manually copy the lnk file by downloading the zip provided here.
2. You can install the appx on Windows 10 PC, but this will not work due to permission problems. Please use the Desktop Edition.
3. To allow Edge to recognize the changes, you've to remember the website where you've created the favourite. After the creation close and reopen Edge, navigate to that website, open and close the favouries (you can try to switch folder too) and then navigate to another website.
4. UWP edition doesn't require Interop-unlock to work.
5. You can't add or remove favourites from CustomEdgeFavs. You've to create or remove these directly from Edge and then edit with CustomEdgeFavs.
6. If you can't delete a bookmarklet, try to edit that again, then open Edge and try to delete before syncronizzation.
7. The favourites syncronizzation will work even with edited bookmarklets. Be careful as you can lose or damage your favourites.
LATEST VERSION + CHANGELOG
Desktop Edition - 1.0 16/01/2016
UWP Edition - 1.0 16/01/2016
p.s. Here's a tutorial in italian with some script tested and created by me http://www.windowsblogitalia.com/2016/01/microsoft-edge-customedgefavs/
Working fine on PC but........
I used the desktop app and it worked but its not installing in phone. I tried from file manager did not work and when I used Device Portal it shows me this error, " Failure reason: Failed to start deployment. Failure text: Package failed updates, dependency or conflict validation. (0x80073cf3) "
Hi, could you try to open the appxbundle from the file explorer app?
Pasquiindustry said:
Hi, could you try to open the appxbundle from the file explorer app?
Click to expand...
Click to collapse
I did. The pop up for installing the apps comes up. once clicked it goes away and then nothing happens. I hard reseted and now trying again.
That's strange. Are you on build 10586 or higher?
i am on the latest build and had reseted the phone. i can still deploy other appx but not yours. Its working fine in PC though.
Hi, try these appx. There are dependencies that you may need to install to make this app working.
You'll find two appx within the zip file.
I think that you can install them from the file manager.
now its done but i had to do a bit tweaking.
Pasquiindustry said:
Hi, try these appx. There are dependencies that you may need to install to make this app working.
You'll find two appx within the zip file.
I think that you can install them from the file manager.
Click to expand...
Click to collapse
Using dependency it worked but as i suspected the shortcut link you have given did not work. So i went into packages ( i made a short cut from PC and copied it to phone. i think you should make a shortcut from the address of edge bookmarks folder on PC ) . After that went to edge folder , roaming state. Voila your app shows me " Success "
I'm already creating lnk files from desktop
Which path did you use? In my phone, the correct path is c:\Data\usera\DefApps.Windows Phone\AppData\Local\Packages etc... (the one available within C.E.F.)
Pasquiindustry said:
I'm already creating lnk files from desktop
Which path did you use? In my phone, the correct path is c:\Data\usera\DefApps.Windows Phone\AppData\Local\Packages etc... (the one available within C.E.F.)
Click to expand...
Click to collapse
i went packages and the Microsoft edge folder.
I tried your other apps before, those were nice. Device diagnostic hub should have a page showing running apps ( not system apps ) like task manager- lite
katsuga said:
i went packages and the Microsoft edge folder.
I tried your other apps before, those were nice. Device diagnostic hub should have a page showing running apps ( not system apps ) like task manager- lite
Click to expand...
Click to collapse
If you can recover the complete path or the lnk file, I will add within the OP
About Device Diagnostics HUB, I've merged the "apps" and the "processes" within the same list. I will add a filter within the next big update (I'm going to release a bugfix with some better translations soon, then I will release the 2.0 with a lot of new features). I've opened a dedicated forum for DDH here http://forum.xda-developers.com/win...-device-diagnostics-hub-performances-t3276664
p.s. diffidate from imitations XD
Pasquiindustry said:
If you can recover the complete path or the lnk file, I will add within the OP
About Device Diagnostics HUB, I've merged the "apps" and the "processes" within the same list. I will add a filter within the next big update (I'm going to release a bugfix with some better translations soon, then I will release the 2.0 with a lot of new features). I've opened a dedicated forum for DDH here http://forum.xda-developers.com/win...-device-diagnostics-hub-performances-t3276664
p.s. diffidate from imitations XD
Click to expand...
Click to collapse
hey. i made a shortcut from pc and working on phone. give me your email id i will send the shortcut file. I tried to post here but xda said i cant.
katsuga said:
hey. i made a shortcut from pc and working on phone. give me your email id i will send the shortcut file. I tried to post here but xda said i cant.
Click to expand...
Click to collapse
I think you've to put the file within a .zip. You can send the file here:
pasindustry at Outlook dot com
Pasquiindustry said:
I think you've to put the file within a .zip. You can send the file here:
pasindustry at Outlook dot com
Click to expand...
Click to collapse
yeah i have sent you the file . check email. Beside that is it possible to get those interlop unlocking tool in appx format. I dont know why but i could never deploy xap using deployer or power tool. For which i am unable to do interlop unlock
katsuga said:
yeah i have sent you the file . check email. Beside that is it possible to get those interlop unlocking tool in appx format. I dont know why but i could never deploy xap using deployer or power tool. For which i am unable to do interlop unlock
Click to expand...
Click to collapse
I will update the lnk asap
Really thanks!
Pasquiindustry said:
I will update the lnk asap
Really thanks!
Click to expand...
Click to collapse
no probs... keep on making such mods. Well try to make them independent of interlop unlock like this one as i cant interlop unlock my phone
Would be good to add auto-fitting the image to certain dimensions and the possibility of personalization as in the Start menu. If that's possible. For example:
https://youtu.be/GVMLHa42U7s
Sorry for my English
Hi. After a few days of excellent work in the program will stop displaying the websites. Re-jump and run is not helping. Is there a way how to fix it?
maxaon09 said:
Hi. After a few days of excellent work in the program will stop displaying the websites. Re-jump and run is not helping. Is there a way how to fix it?
Click to expand...
Click to collapse
Mhm... this is the first time I see this problem.
Have you disabled some settings related to synchronization or you've done some updates from Windows Update? Try to reduce the numer/size of the favourites and their icons too
About the concept, unfortunately that's not possible, because it's possible to use only a picture and I can't add more options to the favourites list within Edge
Pasquiindustry said:
... Try to reduce the numer/size of the favourites and their icons too...
Click to expand...
Click to collapse
Yes, perhaps there is any limit on the number of\a size. If you delete all the created tiles, the program again has earned (remove 1-2 tiles did not solve the problem). When the size of 70x70 pixels was created about 35 tiles.
About the update: the program has been installed on the build 14251. Then updated to 14257. The program works excellent, all created in the early build displays and new. Thank you
=======================================================================================
After 3 hours :Reduced the icons to 50x50 pixels. Created 19 tiles. Closed the program. Then again launched and again the sites ceased to appear.
Bought an Axon 7 from China 1.5 years ago. Very satisfied with it, but only got 2 OTA. Last one a couple of months ago. I tried in vain to identify the type. It is marked A2017 on backside. Buildnumber is ZTE_A2017CTJMV1.0.0B04. Is it possible to upgrade manually to Nougat?
Nisse1234 said:
Bought an Axon 7 from China 1.5 years ago. Very satisfied with it, but only got 2 OTA. Last one a couple of months ago. I tried in vain to identify the type. It is marked A2017 on backside. Buildnumber is ZTE_A2017CTJMV1.0.0B04. Is it possible to upgrade manually to Nougat?
Click to expand...
Click to collapse
That is really weird. But of course it is possible
Look, there are three ways to do this. You have the official method, which involves downloading the OTA yourself from the support page, unzipping it, putting it on the internal storage or SD and going to Updates to apply it. This one might fail. Then there's the TWRP way, but you need to unlock the bootloader. And then there's the MiFlash way, where you don't need unlocked bootloader and it will not fail, but it's a little bit of an extreme...
For now, do this:
http://devicedownload.zte.com.cn/support/product/201606031040/sd/20171009174830988.zip
Download that file and unzip it. There will be a file called "update.zip" and maybe a pdf inside. Take the update.zip and put it in the root of the internal storage. Then go to settings -> Updates, and it should detect it. Install it
Thank You
Thanks,
Downloaded and extracted the update.zip file. Put in the root of SD. Tried the system update. Got answer "Software is up to date" But nothing happens.
Nisse1234 said:
Thanks,
Downloaded and extracted the update.zip file. Put in the root of SD. Tried the system update. Got answer "Software is up to date" But nothing happens.
Click to expand...
Click to collapse
Try putting on the internal storage (not the SD card). If it still does not appear, then try updating through the stock recovery. That should work.
EDIT: just to be clear, you did not extract the contents of the update.zip, did you? You need to put the actual update.zip on the internal storage (you can try on the external sd card). As mentioned by choose an username, check the update.zip you downloaded. It it contains another update.zip, that is the file you need. You may have already done this, but I have seen others still get it wrong...
EDIT 2: that being said, your current version number seems strange. I wonder if that is the problem. Maybe the version you are trying to install is not compatible and therefore not seen by the system.
joaste said:
EDIT 2: that being said, your current version number seems strange. I wonder if that is the problem. Maybe the version you are trying to install is not compatible and therefore not seen by the system.
Click to expand...
Click to collapse
That's the point. I wanted to see if the normal update could go normally or not. Next step is MiFlash
At least we know it's an A2017...
Choose an username... said:
That's the point. I wanted to see if the normal update could go normally or not. Next step is MiFlash
At least we know it's an A2017...
Click to expand...
Click to collapse
You can still try first through stock recovery.
Right...
joaste said:
Try putting on the internal storage (not the SD card). If it still does not appear, then try updating through the stock recovery. That should work.
EDIT: just to be clear, you did not extract the contents of the update.zip, did you? You need to put the actual update.zip on the internal storage (you can try on the external sd card). As mentioned by choose an username, check the update.zip you downloaded. It it contains another update.zip, that is the file you need. You may have already done this, but I have seen others still get it wrong...
EDIT 2: that being said, your current version number seems strange. I wonder if that is the problem. Maybe the version you are trying to install is not compatible and therefore not seen by the system.
Click to expand...
Click to collapse
The file "update.zip" contains 29 sub files, none of them was named update.zip.
No I did not unzip it.
This time I put the "update.zip" in the root of the phone folder. But nothing happened when I run the Settings»update.
How do I post screen shots in this forum?
Nisse1234 said:
The file "update.zip" contains 29 sub files, none of them was named update.zip.
No I did not unzip it.
This time I put the "update.zip" in the root of the phone folder. But nothing happened when I run the Settings»update.
How do I post screen shots in this forum?
Click to expand...
Click to collapse
Okay. Put it in the SD card. Then turn the phone off.
After it is completely off, hold Volume Up + power until the zte screen appears. You should get into the stock recovery.
Now, the stock recovery will most probably be in chinese, but you have to use an option that says 'sd' between a bunch of chinese stuff. It's easy to spot. Scroll to that option with the volume keys and select it with Power. The contents of the SD card will appear. Select the update.zip and see if it works or not.
Well...
Choose an username... said:
Okay. Put it in the SD card. Then turn the phone off.
After it is completely off, hold Volume Up + power until the zte screen appears. You should get into the stock recovery.
Now, the stock recovery will most probably be in chinese, but you have to use an option that says 'sd' between a bunch of chinese stuff. It's easy to spot. Scroll to that option with the volume keys and select it with Power. The contents of the SD card will appear. Select the update.zip and see if it works or not.
Click to expand...
Click to collapse
....I have just one mobile. What will happen with data like contacts, apps, bank-id etc?
Nisse1234 said:
....I have just one mobile. What will happen with data like contacts, apps, bank-id etc?
Click to expand...
Click to collapse
Nothing. If you use MiFlash they will get erased, but not this way.
Think about it this way; doing this from the Updates section actually issues a command that gets you into the recovery to flash the file. So basically you skip the Updates part.
Please tell me if the recovery is in chinese later
Nisse1234 said:
....I have just one mobile. What will happen with data like contacts, apps, bank-id etc?
Click to expand...
Click to collapse
Also a small FYI:
-Contacts are backed up on your Google account, and even if you don't have one you can export all of your contacts to a .vcf file, then back it up, and then import it once you finish
-Apps... Just download them again. You can backup the 'Android' folder that's on your internal storage, most games save their data there.
-Bank ID? Isn't that just a log in?
I format my zte axon 7 A2017G and now am stock on WiFi(when ever I tap next it will load then return to WiFi) and it seems the phone is locked by zte please how do I unlock it
Nisse1234 said:
....I have just one mobile. What will happen with data like contacts, apps, bank-id etc?
Click to expand...
Click to collapse
no,but you'd better make a backup .in order to prevent accidents