Hello everybody, I have a501 running on HC, wanted to install an ICS ROM, downgraded, rooted the tablet and somehow after the downgrade I ended up with a stock android v.3.0 but it was for the a500 so therefore I didnt have 3g and gps no more. After this the tablet gave me an ICS update I tried installing it but still no 3g and gps (obviously). Then I completely messed my recovery and now I ended up with a bricked tablet, cannot boot (stuck in a bootloop), cannot enter recovery (gives me an exclamation mark and nothing more) cannot enter in APX mode... Any ideas on fixing this mess? Tried everything in this thread and still nothing...
Thanks in advance!
Well, when you took the update, it overwrote your recovery and everything else, which is why you have stock recovery.
To get into APX, with tablet off, hold the pinhole reset, the press PWR. Hold for 4 seconds, release PWR, the 1 second later release the pinhole.
You should have a black display, and the PWR light should be on. Confirm via Windows Device Manager
Keep in mind, to update to the unlocked bootloader V*, you will need to have your UID number, so I hope you still have it written down somewhere (so you can get the SBK for the bootloader change).
Related
A message popped up from Samsung to install an update (I had been pressing cancel for the past week on this update). It says click OK to reboot and apply update (something along those lines) so I do. Now I am stuck with a tablet that won't boot. If I hold the power button it says "Samsung Galaxy 10.1" after about 12 seconds, but then it goes away and back to darkness. Nothing else. Holding power and volume up does nothing.
Someone know what is going on and have any idea how to resolve?
The best way is to restore any backup you have from cwm recovery. Else grab a stock firmware and flash it with ODIN or if zip than CWM recovery. For luck, try clearing cache and data in recovery, first!Perhaps it may work saving you all fuss of flashing a firmware.
I cannot even boot that far too get into recovery. And I just noticed that although I can't boot, the backlight is on (on a solid black screen).... wtf
You can't hold volume down and power button to enter recovery?
Nope. I plugged into my computer and for some reason with the USB connectd it let me enter recovery. Flashed a backup and rebooted, but now I have no wifi... im confused.
it occured once to me when i tried to overclock, it never worked except when installing a new rom... Try to root the device and then install a new rom
OK, was a helluva night messing with ROM and kernel installs... I have yet to go back to completely stock (that's next up tonight, unfortunately), but I installed Starburst ROM and the Wifi still didn't work so I then installed pershoot's kernel and now when I boot the screen is extremely distorted kind of like this: http://t1.gstatic.com/images?q=tbn:ANd9GcTsKa5IoQxnesGdUjykWDDggoQZ38yZ2VXSgPAQ09NOCnETzl9-
As a side note, when I say the wifi is not working, it still shows all networks and allows me to connect just like normal. However when connected no apps can access the network...
Can someone point me to a thread on how to revert EVERYTHING back to stock so I can start fresh? TIA!!
http://forum.xda-developers.com/showthread.php?t=1171089
Should have all the files you need. From where you are now I would flash the stock OTA 3.1 or TW then flash the stock recovery and do a factory reset from that recovery. That should get rid of the garbled screen.
Thanks buddy. On my way to grab the files now
I heard the update was pulled as it sometimes rewrites the bootloader improperly. You might need to send it in, unfortunately.
Hi all,
I thought I'd consult the brains trust to see if anyone thinks this is salvageable. Was using my A500 about 2 hours ago, suddenly the screen powered off. Thinking nothing of it, I held down the power button to restart it. When powering back on, nothing appears to happen except for the power button lighting up. No screen on, no vibe, nothing except the power light on.
Tried power cycling a few times to no avail. Tried the reset button. Tried the Vol+ Power and Rotation switch reset. Nothing.
Out of morbid curiousity, I plugged it into the PC and switched it on and I get an APX driver being installed. So, clearly something is happening here.
It has done this once before and came back to life of its own accord very shortly afterwards, this time it's been dead for quite some time.
Any suggestions? It's well out of warranty now, so I doubt Acer would be interested in it at all.
Dopius_Fishius said:
Hi all,
I thought I'd consult the brains trust to see if anyone thinks this is salvageable. Was using my A500 about 2 hours ago, suddenly the screen powered off. Thinking nothing of it, I held down the power button to restart it. When powering back on, nothing appears to happen except for the power button lighting up. No screen on, no vibe, nothing except the power light on.
Tried power cycling a few times to no avail. Tried the reset button. Tried the Vol+ Power and Rotation switch reset. Nothing.
Out of morbid curiousity, I plugged it into the PC and switched it on and I get an APX driver being installed. So, clearly something is happening here.
It has done this once before and came back to life of its own accord very shortly afterwards, this time it's been dead for quite some time.
Any suggestions? It's well out of warranty now, so I doubt Acer would be interested in it at all.
Click to expand...
Click to collapse
In the Dev threads, or possibly Q&A, there is a thread called "stuck in APX mode". In there I believe are some steps to see if you can recover.
But, if you're in APX mode, you could probably try NVFlashing the bootloader and recovery the old fashioned way manually.
But look up that APX thread first. Will probably have the answer. I'll see if I can find it in a little while, if you don't find it first.
MD
Moscow Desire said:
In the Dev threads, or possibly Q&A, there is a thread called "stuck in APX mode". In there I believe are some steps to see if you can recover.
But, if you're in APX mode, you could probably try NVFlashing the bootloader and recovery the old fashioned way manually.
But look up that APX thread first. Will probably have the answer. I'll see if I can find it in a little while, if you don't find it first.
MD
Click to expand...
Click to collapse
Thanks MD. I looked up the threads you suggested, and after a lot of screwing around I have installed the APX drivers and used blackthund3r's APX Flash Util 0.3 (The link is broken to the current version) to attempt a recovery of my tab.
Its now sitting at an Acer screen, "Entering Acer Download Mode" while the flash util is sitting at:
Nvflash started
[resume mode]
It's been there for about 10 minutes now, no progress to report. Is it worth just sitting it out, or now that the damn tab shows SOME signs of life, can I just restart it and reset to factory?
And then most bizarre of all. I declared no progress, rebooted it. It went back to APX mode.
Re-ran the blackthund3r tool, it didnt do much so I bailed that. Restarted tab and attempted to load recovery (vol + and power) and it booted normally.
What the hell...
Dopius_Fishius said:
And then most bizarre of all. I declared no progress, rebooted it. It went back to APX mode.
Re-ran the blackthund3r tool, it didnt do much so I bailed that. Restarted tab and attempted to load recovery (vol + and power) and it booted normally.
What the hell...
Click to expand...
Click to collapse
erm for now i would make sure you have all backups of data, cpud etc,.. just incase. you can just sit em on your computer i always try to keep a nandroid of all 3 of my devices each month or so.:good:
edit: and of course keep the link for the thread MD recommended.
Gee. Sounds exactly like mine....
The only thing I haven't tried is an update .zip, but I don't hold out much hope.
Considering parting out at this point....
Yeah, I dont have high hopes that it will last a whole lot longer. Up to this point it has been running Acer OTA updates only, no custom ROMs and no root.
I restarted the tab a little while ago and it went back into APX mode again and stayed there. Some more furious button mashing and attempted restore-mode boots, and it booted normally.
I made the point of wiping it this time using the Vol+ & Power & Rotation Lock trick and its been ok so far.
Dopius_Fishius said:
Yeah, I dont have high hopes that it will last a whole lot longer. Up to this point it has been running Acer OTA updates only, no custom ROMs and no root.
I restarted the tab a little while ago and it went back into APX mode again and stayed there. Some more furious button mashing and attempted restore-mode boots, and it booted normally.
I made the point of wiping it this time using the Vol+ & Power & Rotation Lock trick and its been ok so far.
Click to expand...
Click to collapse
I have a cousin in Jamaica. She might possibly help (chicken foot and some frogs blood...voodoo you know)
Here's What I think.
You got some corrupt data or a partially bad devblock. This might explain the strange behavior on boot.
Like the tab really doesn't know how to boot.
Personally I would do 1 of 2 things at this point. Either;
1. Root that thing, and try running Timmy Deans root back to 3.2. This should reset your partitions back to normal. Then work your way back to an ICS rooted, Bootloader, and custom rom.
2. Leave it alone, and don;t turn the tab off. Clearly some partitions are messed up at this point. The toggle of the lock usually wipes user data. But the core issue is still there.
If it were me, I would pull out the nuclear missile and go for it all.
MD
Moscow Desire said:
I have a cousin in Jamaica. She might possibly help (chicken foot and some frogs blood...voodoo you know)
Here's What I think.
You got some corrupt data or a partially bad devblock. This might explain the strange behavior on boot.
Like the tab really doesn't know how to boot.
Personally I would do 1 of 2 things at this point. Either;
1. Root that thing, and try running Timmy Deans root back to 3.2. This should reset your partitions back to normal. Then work your way back to an ICS rooted, Bootloader, and custom rom.
2. Leave it alone, and don;t turn the tab off. Clearly some partitions are messed up at this point. The toggle of the lock usually wipes user data. But the core issue is still there.
If it were me, I would pull out the nuclear missile and go for it all.
MD
Click to expand...
Click to collapse
Tried the update.zip - nada
Tried timmiedean yesterday, went into Acer Download mode OK, failed....
If dolps is like mien, the first time he tries to go into recovery, it will crash again...
It's baaaack!
Tried blackthunder flash again, failed.
Went to turn off to get out of APX, and it booted!
Now boots, boots to recovery and boots to primary.
I have no explanation.
We will see.
I am suspicious....
tennessee_titan said:
It's baaaack!
Tried blackthunder flash again, failed.
Went to turn off to get out of APX, and it booted!
Now boots, boots to recovery and boots to primary.
I have no explanation.
We will see.
I am suspicious....
Click to expand...
Click to collapse
I told you maaaannnn, go see me cousin in Jamaica maaaannnnn. She do some good things you see
Glad it's running again.
MD
First, is this a SOD?
I can kill it by booting into recovery and get it back by using Blackthunder flash tool to go into APX and letting it sit for 20 minutes or so. Close the program, unplug, reboot and it is back. I would like to use timmiedean (td) and go back to square 1, but it fails at the image detect ( displays ICS 4.0.3 Civato as the current image, a red X for the new image). Has td been proven to work reverting from ICS? Will a boot recovery reflash and a new ROM flash solve this? Is there another way to get out of ICS back to HC?
Any suggestions/comments welcome!
EDIT: I flashed FLEXxx V4. Shut it off, problem still there....
Really frustrated. Trying to use the timmiedean tool, but it requires that the unit be shut off in the middle of the process, which kills it. Does anyone know the whereabouts of the blackthund3r revert tool, or the .apx package for his flash tool. I can't find it...
I'm done with this one. On Ebay for parts.... GONE!!!
Have an A100 now, rooted, unlocked,. on Relix
1 more A500 coming next week
Hi,
My A500 is stuck on the acer logo screen. What should i do now? can anyone please help me on this?
Current Andriod version is 4.0
Are you on Stock ICS? or do you have custom the bootloader?
If you're on OTA Stock ICS, when booting your tablet, try holding down the volume down button, and moving the lock orientation switch on and off, that should erase data and cache, essentially a factory reset. If that doesn't work, you might have to pull out your SD card, and get an OTA update zip.
http://forum.xda-developers.com/showpost.php?p=25590039&postcount=131
Place the downloaded file onto the root of your SD, then reboot the Iconia and hold the volume up key. This will force it into the recovery to reinstall ICS.
If you're not on stock, boot yourself into APX mode, by turning off the tab, then with a paper clip, hold the reset button, while doing that, press the power button for two seconds, release power button, then release the reset button.This should bring you into APX mode. After that, use Blackthunders APX tool, provided you have your CPUID and SBK, to reflash the bootloader. This will reinstall the recovery and bootloader, from which you can re flash the ROM
Hi,
I'm in a similar boat, so instead of starting a new thread, I hope you don't mind I hitch hike on yours.
My iconia got stuck at the loading screen with "android" being displayed.
I'm on stock HC, had this problem once before, and managed to find a rom and flashed to get it going.
But this time, when I flashed the same rom that worked last time, the tablet said "unofficial rom" upon reboot. Tried a few other roms to no avail.
Just wondering if there's a original official Aust. rom that I can download and reflash my iconia?
Thanks
speedyduck said:
My iconia got stuck at the loading screen with "android" being displayed.
I'm on stock HC.....
Just wondering if there's a original official Aust. rom that I can download and reflash my iconia?
Thanks
Click to expand...
Click to collapse
Stock HC after 3.1 is unrootable so you need to go back to 3.1 and take the ota to 3.2 and 3.2.1..or
Forget HC and flash the v8 bootloader from 3.1 and get yaself some ics/jb goodness!
There's a nz ota update.zip for 3.1 here http://forum.xda-developers.com/showthread.php?t=2049778
Sent from my GT-I9300 using Tapatalk 2
Solved!
Please buy hyelton a beer or a damn new phone. He's a hero.
This worked: http://forum.xda-developers.com/showthread.php?t=2432476&highlight=decrypt
Hey guys, but of an emergency here...
I'm stuck at the LG logo after flashing the Pacman ROM with the latest unofficial CWM, and it seems to have failed at Formatting system. All four touch buttons on the bottom were blue, as if they had been pressed and highlighted. No response from anything.
Reboot. Then it got stuck on the LG logo. I can't access CWM anymore, holding power + vol down does nothing, I just go back to the logo. I'm running a D802.
This was a pretty standard flash for me, I have done this many times, so I was confident in it, but now have no way back into a phone I desperately need within hours.
Process went as follows;
Full wipe, format, initialize install, it failed/crashed/whatever, rebooted, now stuck on logo, unable to access CWM, and obviously unable to access ROM.
USB Debugging was on, but as the ROM doesn't exist anymore, not sure how much help that'll be.
I'll gladly go back to either CWM or TWRP, as well as stock ROM or whatever. I can sort all that out later, right now just need things back in running order.
Edit1: I can't even turn it off. It simply boots up again, so now also worried of damaging display or battery.
Edit2: It's not showing after entering "adb devices". List is empty.
ANY help appreciated.
I'm running Windows 8, and no, I will not be able to reinstall to W7 or Ubuntu.
Thank you
Hello all,
Any help with this would be seriously appreciated. I rooted my Nexus 10 a while back, maybe two years ago. I'm not very proficient with this stuff. Anyhow I decided to do the OTA upgrade to 5.0...I was concerned something would go wrong unless I went to stock first, but I read that the only thing that would happen is root would be removed.
Anyhow, the tablet appears stuck while booting. I see the Google screen first with the unlocked indicator on the bottom. A few seconds later is the Android logo on its back, a red triangle over it with an exclamation point and "no command" written below". It stays that way for a minute or so, tries to reboot and goes back to the no command screen. I can't even power off, when I try to do so it just powers back on by itself and ends up at the no command screen again.
I tried booting into recovery (power, volume up, volume down). My options from here are either Start, Restart Bootloader, Recovery Mode or Power Off. Every option I choose leads to the No Command Screen (except power off, which powers off). No idea what to do from here.
Any help at all would be appreciated. As you can probably tell I don't have much experience with this and just wanted to go back to unrooted stock. If you have advice, please be clear. I can follow directions well enough, just don't have much experience here. Thanks in advance.
Same here, bootloop.
Same thing here. A seemingly short download of Lollipop (even though I have 50Mbs internet). Installation, reboot, and now it loops endlessly. I can get to the bootloader or into Download mode, but that's all. Recovery mode just reboots. I was rooted and had TWRP installed. Other than that, I was running stock 4.4.4.
I've rooted all my devices, and installed various ROM's on several devices. I have the full ADB installation. I have the Nexus Root Toolkit installed. The problem is, the device will not show up under "Devices" on the computer itself. I've installed every USB driver there is (and uninstalled each one after it does not work, so no I do not have several USB drivers installed). Of course nothing shows up using "adb devices" either. Nexus Root Toolkit also cannot find any devices. I've read everything on this subject I can find, and there are no answers out there. Anyone have ANY ideas??
Thanks
Guys, if your device is connected in fastboot (try "fastboot devices") then you can flash roms or recovery (and then flash rom) from there. There are multiple threads with the same problems out there which were fixed. E.g: http://forum.xda-developers.com/nexus-10/help/bricked-t2948546
In my example, I flashed TWRP recovery from fastboot, then installed custom ROM from recovery (official ROM failed to install for some reason). Try this, it might help.
danweis said:
Same thing here. A seemingly short download of Lollipop (even though I have 50Mbs internet). Installation, reboot, and now it loops endlessly. I can get to the bootloader or into Download mode, but that's all. Recovery mode just reboots. I was rooted and had TWRP installed. Other than that, I was running stock 4.4.4.
I've rooted all my devices, and installed various ROM's on several devices. I have the full ADB installation. I have the Nexus Root Toolkit installed. The problem is, the device will not show up under "Devices" on the computer itself. I've installed every USB driver there is (and uninstalled each one after it does not work, so no I do not have several USB drivers installed). Of course nothing shows up using "adb devices" either. Nexus Root Toolkit also cannot find any devices. I've read everything on this subject I can find, and there are no answers out there. Anyone have ANY ideas??
Thanks
Click to expand...
Click to collapse
Go to Fastboot mode (pwr+both volumes), Than select recovery after a while an android with Exclamation mark appears which is a stock recovery screen. To access the stock recovery menu press and hold power than press one of the volume keys so the menu will appear. Than do a factory reset and clear caches. You can than reboot and wait for boot animation to finish (it wont take long this time) and you will boot.
If this doesnt work you can flash a stock factory image easily from fastboot again.
Aresmar said:
Go to Fastboot mode (pwr+both volumes), Than select recovery after a while an android with Exclamation mark appears which is a stock recovery screen. To access the stock recovery menu press and hold power than press one of the volume keys so the menu will appear. Than do a factory reset and clear caches. You can than reboot and wait for boot animation to finish (it wont take long this time) and you will boot.
If this doesnt work you can flash a stock factory image easily from fastboot again.
Click to expand...
Click to collapse
I also had the same problem... I followed these instructions and now my Nexus 10 can boot normally (it took a long time to boot).
Only problem is all my data was deleted.... stup*d f*cking sh*t!!!!!!!