After stucking with 5.0.2.7 for a very long time i asked Ivan to compile the cwm from new source,geno has released this when release ICS but only in chinese..so its usless to us...so here it is the new 6.0.1.5 CWM recovery!!
Use like any other cwm...remember to rename the img to recovery.img (remove the ivan at the end!)
Post anybugs so we can fix them!!
recoveryivan.img - 6.47 MB 6.0.1.5
fix mounting....
Report more!!!
pikachukaki said:
After stucking with 5.0.2.7 for a very long time i asked Ivan to compile the cwm from new source,geno has released this when release ICS but only in chinese..so its usless to us...so here it is the new 6.0.1.5 CWM recovery!!
Use like any other cwm...remember to rename the img to recovery.img (remove the ivan at the end!)
Post anybugs so we can fix them!!
recoveryivan.img - 6.47 MB
Click to expand...
Click to collapse
Cool, setting stage for cm10 !
Plz upload it on googlecode also if u can :/
Generation_Next-2000 said:
Cool, setting stage for cm10 !
Plz upload it on googlecode also if u can :/
Click to expand...
Click to collapse
upload it on googlecode
Is there a new touch recovery?
Sent from my u8800-51 using xda premium.
Somcom3X said:
Is there a new touch recovery?
Sent from my u8800-51 using xda premium.
Click to expand...
Click to collapse
No cos you are the only one in the world that like that sh1t!!
nice job thanks for sharing this. also is there is there a touch function? i hope not...
No, apparently no one like a touch function
There is only the v6.0.1.0 version
There is a problem with the USB Mount, at least to me....
dingila said:
There is a problem with the USB Mount, at least to me....
Click to expand...
Click to collapse
Johnnie: E:Can't mount /sdcard when choosing install zip from sd card!!
Sent at 7:09 PM on Sunday
Ivan: i tested it，it is ok。。
tomorrow，i upload new one
will it work for gingerbread too?
korekore1 said:
will it work for gingerbread too?
Click to expand...
Click to collapse
Don't know dont recomended cos its build from JB sources!
pikachukaki said:
Don't know dont recomended cos its build from JB sources!
Click to expand...
Click to collapse
great job pika, then when it comes JB?
feedback
I fleshato with the new CWM 6.0.1.5. the FrozenPika v. 1.3 but I got the same bug than before ....? restart after spread, blocks prematurely.
Hey Pika is the USB mount problem fixed ???
Generation_Next-2000 said:
Hey Pika is the USB mount problem fixed ???
Click to expand...
Click to collapse
Logicaly yes but i didnt see ivan today cos i get back home late and in china they were sleeping...tommorow...
Hello, with this CWMR 6 only volume keys are working, others don't, is there some kind solution?
Artursj said:
Hello, with this CWMR 6 only volume keys are working, others don't, is there some kind solution?
Click to expand...
Click to collapse
That's why I like touch...
Sent from my u8800-51 using xda premium.
Hey pika did u upload the fixed recovery .img with USB mount problem solved ???
Generation_Next-2000 said:
Hey pika did u upload the fixed recovery .img with USB mount problem solved ???
Click to expand...
Click to collapse
I waiting ivan to upload it his has a problem in the mornign so we have to wait a bit..its not so major problem for now...let the men have some rest!!
Did anybody try to restore GingerBread back ups created with 5.0.2.7 by this CWM.
EDIT : I tried it myself. It did restore smoothly from CWM 5.0.2.7 Backedup GB ROMs (Moihack's 7.2) and there was no problem booting. The problem was something else. Once the GB ROM was restored, the Old CWM 5.0.2.7 was also restored alongwith the ROM and this CWM 6.XXX by IVAN got replaced.
One more thing in this 6.XXX CWM by IVAN there was no problem mounting External SD cards on most of the occasions. Only when it could not mount Ext SD "REBOOT RECOVERY" from Advanced options solved the problem. Also the Volume keys worked well for selection. But GO-BACK method in 5.0.2.7 is much better at least for me than this. Pushing the Capacitative hardware BACK button is more convenient than scrolling down to last (reverse scrolling is quicker) and selecting by power.
Related
GalaxySense-MODV1.0-CM7.2-by TAZ
I thank kevinlekiller for permission to use your ROM The End, as the basis for my rom style HTC Sense
.-File system in ext4
.-Root & Odexed
.-MULTILANGUAGE
.-NTSense Theme CM7 by nhnt11
.-Camera Fix for CM7.2
.-Google Maps 5.12.0 + Navigation Unlock (don't update)
.-Framework mod by nabildanial
.-Blackhawk kernel by ketut.kumajaya
.-Turboboost v8.5 by GadgetCheck
.-SlaidFastMod v2.5 by slaid480
.-Adobe Flash 11.0.1.153
.-Build.prop mods
.-Bootanimation HTC Sense by cypis
.-FileManager
.-Market 3.4.4
.-ICS&HTC ringtone/notifications
.-Modded gps.conf for europe
.-Removed: DevTools.apk, Spare Parts.apk, CM Wallpapers.apk, GenieWidget.apk
.-Sense Analog Clock Widget
.-MagicLocker
.-Launcher Sense UI 1.5.0.3
http://www.youtube.com/watch?v=RciaKkojwBc
Installed with CWM Recovery 5
wipe data/factory reset
wipe cache partition
format /system
install zip from sd card>choose zip from sd card>GalaxySense-Modv1.0 by TAZ.zip
DOWNLOAD
ROM repaired and working 100%! Sorry for the inconvenience and delay!
.-Applied NTSense in ThemeChooser for better visualization of the ROM
.-Download Sense 3.0 - Magic Locker Theme for better viewing experience and with all the style of HTC Sense
**full version from inbox**
it's great....
Basebands? And, CMW5 works?
psyb said:
Basebands? And, CMW5 works?
Click to expand...
Click to collapse
the baseband may be coming into your stock rom
Oooh yeah! And, about battery? Like others CM ROMs or like stock? Or better? hahaha
where the link for dwonload bro?..
i wanna ask sumthing......
how do you install esfilemanager in /system/????
because every time I move this app to /system/ the root function doesnt work.....
newbie here, is it capable for overclocking? if so, very nice!!! where to download?
The OP doesn't contain download links. 13/1/2011.
guys it is me (or my eyesight is weak)
i dont see the link
i am sense fan and had installed htc sensed themed rom
but i guess it being 7.2 will be faster (hope so )
so was thinking of try it too
hope it has some new changes tho
Click thanks if i helped
Sam
may be it is under construction it is simply overview of the new coming rom [email protected] sam u r rite the link is not there
installation aborted.......
bojan1974 said:
installation aborted.......
Click to expand...
Click to collapse
sorry for the mistake in installation, and correction work, sorry!
Try to add :
~default file manager from stock ... the cm7 file manager is damn ugly !
~samsung keyboard with all languages !
Nice job so far, man !
ROM repaired and working 100%! Sorry for the inconvenience and delay!
tazlooney89 said:
ROM repaired and working 100%! Sorry for the inconvenience and delay!
Click to expand...
Click to collapse
dont mention it
i understand it is hard to make a rom
so you take your time
its completely ok
and thankful for the rom tho
Click thanks if i helped
Sam
who have problem with installation aborted, try to rename rom GalaxySense-MODV1.0+LITE+by+TAZ.zip to GalaxySense.zip
evilxdeadly said:
who have problem with installation aborted, try to rename rom GalaxySense-MODV1.0+LITE+by+TAZ.zip to GalaxySense.zip
Click to expand...
Click to collapse
thanks, I'm resolved, the problem was that he had not signed the rom, Greetings!
P4qui7o said:
Try to add :
~default file manager from stock ... the cm7 file manager is damn ugly !
~samsung keyboard with all languages !
Nice job so far, man !
Click to expand...
Click to collapse
Since this is going to be my few last posts I will be nice , stock Samsung file manager requires very different framework and will not work, and using the magical and whimsical search button you will find a howto on porting the Samsung keyboard to cm7
Sent from the Android Revolution HD HQ using xda premium
Please correct MegaUpload link 'cause I see the error "this file doesn't exist".
5.5 update to 2.5.4
changelog:http://www.miui.com/thread-559645-1-1.html
http://115.com/file/anguh6i6#
MIUIv4-MOTORIO-BETA-2.5.4.zip
if you neep goolgle
http://115.com/file/e7npesrk#
app.rar
5.2 fixed root.
http://115.com/file/dpzvdn2h#
MIUIv4-XT720-2.4.27.zip
I have streamlined it.
4.30 update to 2.4.27
http://115.com/file/c2hd73fy#
miui-v4.0-4.30.zip
4.28 download link: ........uploading Please wait...
update .http://115.com/file/ani2c5x7#
miui4.0-beta-motoro-xt720.zip
new build . base on I9000 2.4.21 this version RAM is more than last version.(in chinese say: 很给力！)
what work:
1.phone
2.sms (can creat new mms)
3.wifi
4.mobile data
5.usb work well
6.miui superuser not working. I use cm9 superuser.(I think should be update busybox. I try and it work.but after it reboot have some problem neep help)
7.camera.
.....
what not work
1.
4.21
First i have to think tiger2wander and mancloud . I only do something copy . today i saw mancloud upload the miui-v4 for milestone. so i try to port it to xt720.
It can work. I will upload rom for milestone xt720.
From mancloud :http://www.android-hilfe.de/custom-...estone/221454-rom-port-miui-v4-milestone.html
PS:if you phone is milestone. i think you should update bootfix .this is base on motorio 50R
what works:
1.mobile data
2.telephone
3.mms4.camera
5.sensors
add app2ext. replace bootanimation!
what not work :
1.usb not work
•RSD to STSKT_N_79.33.50R (Android 2.2.1)
•Root (use SuperOnceClick or root4nix-t2w)
•Download and install OpenRecovery.apk, run Install from OR
•Download ROM update & Addons package
•Reboot to OR (poweroff, Hold volumn up & press power button)
•Wipe data/Factory reset
•Apply Updates: ROM
•Reboot
NOTE: For Milestone XT720 (International version) use Mioze7Ae's bootfix http://forum.xda-developers.com/show....php?t=1284017
After enter the system . you should replace the libaudio.so because i forgot to replace it . so sorry.
Download link:http://115.com/file/bexkzmv6#
miui-v4.0-beta-lwxddlq.zip
Anybody want to use miui?
Any description for this rom ? I can't understand the language . Thanks .
lwxddlqkillapp said:
Anybody want to use miui?
Click to expand...
Click to collapse
I want to try it. Where can I download it? Thanks.
napnau said:
I want to try it. Where can I download it? Thanks.
Click to expand...
Click to collapse
I will upload tonight GMT+8
i would love to try, when my internet conn back cant DL from phone.
last stable miui was miuifinal that i use it right now.
i have added download link
Do you have to use any bootfix for XT720 or MOTOROI?
lwxddlqkillapp said:
i have added download link
Click to expand...
Click to collapse
Thank you. One more thing, is it possible to add a working FM Radio on this Rom? I've tried CM9, radio is working but has a volume problem.
spitcuba said:
Do you have to use any bootfix for XT720 or MOTOROI?
Click to expand...
Click to collapse
bootfix for XT720
It's alright though finished downloading the file. Waiting for the upload. More power man.
Yeah I would like to try it, Thanks a bunch good buddy, much appreciated!
Please post if there is a proper instructions when flashing this Rom. Still waiting for the upload. Hope it will be soon. Thanks.
I have upload the sourse.
Can I skip the RSD part, if I already use MIUI?
lwxddlqkillapp said:
I have upload the sourse.
Click to expand...
Click to collapse
Is there any particular GAPPS that should be install along with this rom? (Downloading it now)
Great! Hope more from you for Milestone
I hope we can have a mirror link. Thanks
And someone already tried it?
i have installed and tried. seems some apps cannot access the sd card, or is there any extra setting?
I tried it. 1st reboot, succeed. After rebooting again, stack on bootloop. I wander does it support ext partition. My installed apps were gone. And why is the boot animation is CM9 when it should be MIUI? Hope a more updated version of this rom will come out. Thank you.
This rom is base on milestone on xda . You can view the thread about CM9.
work:
phone
sms
camera
not work:
fm
...
I NEED HELP : THIS ROM CANT OVERCLOCK BY ADD INT.D if add int.d when setting-processor the phone will be reboot. i dont why ?
http://kuai.xunlei.com/d/CNFKEGTGFIRH
Help on the download link.
napnau said:
Help on the download link.
Click to expand...
Click to collapse
Just click the text "cm9..." and give us feedback.........
B_e_n said:
Just click the text "cm9..." and give us feedback.........
Click to expand...
Click to collapse
Will it work on our XT720? Thanks for the help man.
lwxddlqkillapp said:
I NEED HELP : THIS ROM CANT OVERCLOCK BY ADD INT.D if add int.d when setting-processor the phone will be reboot. i dont why ?
http://kuai.xunlei.com/d/CSVUYGDTSJBN
Click to expand...
Click to collapse
Which overclock.ko and symsearch.ko are you using? It could be that you have incompatible ones. The Milestone (A853) has the 2.6.32 froyo kernel, but we're stuck with 2.6.29 eclair kernel. In particular symsearch.ko had to be adapted for 2.6.29. The versions on our github have been modified and recompiled for 2.6.29: https://github.com/CyanogenModXT720...sholest/tree/gingerbread/prebuilt/lib/modules (note that overclock.ko requires a working symsearch.ko is loaded first)
I installed it and it is pretty good at the first look. You can install it using the xt720 bootfix, the only thing missing are gapps and i tried installing them after, but it doesnt work for me. Average RAM is about 50-60 M and it runs pretty smooth, hope to see more from you soon
EDIT: After reboot the gapps appeared
Mioze7Ae said:
Which overclock.ko and symsearch.ko are you using? It could be that you have incompatible ones. The Milestone (A853) has the 2.6.32 froyo kernel, but we're stuck with 2.6.29 eclair kernel. In particular symsearch.ko had to be adapted for 2.6.29. The versions on our github have been modified and recompiled for 2.6.29: https://github.com/CyanogenModXT720...sholest/tree/gingerbread/prebuilt/lib/modules (note that overclock.ko requires a working symsearch.ko is loaded first)
Click to expand...
Click to collapse
Thanks Mioze7Ae, I will try it...
But I used the overclock.ko and symsearch.ko are adapted for 2.6.29....
spitcuba said:
I installed it and it is pretty good at the first look. You can install it using the xt720 bootfix, the only thing missing are gapps and i tried installing them after, but it doesnt work for me. Average RAM is about 50-60 M and it runs pretty smooth, hope to see more from you soon
EDIT: After reboot the gapps appeared
Click to expand...
Click to collapse
Thanks
So what is not working???
B_e_n said:
Thanks
So what is not working???
Click to expand...
Click to collapse
Nothing so far. Battery life also seems to be much better than in fj's one. The only thing I found where a random reboot when being in the browser, but I will use it as my daily driver from now on
spitcuba said:
Nothing so far. Battery life also seems to be much better than in fj's one. The only thing I found where a random reboot when being in the browser, but I will use it as my daily driver from now on
Click to expand...
Click to collapse
Are you kidding!!!!!
I have to try it right now!!!!
BTW on which cm9 rom is this base lwxddlqkillapp??????
Can you post a link to the rom thread??????
Hi ben you will need bootfix for your xy720.
Sent from my SGH-T759 using xda premium
mchlbenner said:
Hi ben you will need bootfix for your xy720.
Sent from my SGH-T759 using xda premium
Click to expand...
Click to collapse
Thanks i use it but i m stuck at M logo.......
But my rsd flash don t want to flash so i flash it directly over my old cronos x rom... I will have to try to flash it again at home my work computer often don t want to flash... I don t know why...
Which sbf do you use spitcuba?????
b_e_n said:
thanks i use it but i m stuck at m logo.......
But my rsd flash don t want to flash so i flash it directly over my old cronos x rom... I will have to try to flash it again at home my work computer often don t want to flash... I don t know why...
Which sbf do you use spitcuba?????
Click to expand...
Click to collapse
str_u2_01.1e.0
I can overclock as f.y's rom. Can anyone giv me a bootfix
spitcuba said:
str_u2_01.1e.0
Click to expand...
Click to collapse
It works with STR_U2_04.1E.1 too (i successfully flash it in the end...) I think it will work with all the stock sbf.
If someone can try with the mod one (i have less than 2Mo free in the system rom...)
And i use the first bootfix for motoroi rom (and i clear all before and after the flash)
I had to reinstall gapps cause it can t sync my contact with out it (it only sync gmail and drive)
I had a little chinese everywhere in the beginning but after 2reboot all were gone. The only thing is that the OK is on the right and the cancel is on the left (not a big deal but it surprise at the beginning...)
App2ext works fine; the playstore too; and youtube too
I can t take pics with the camera (it launch it but don t answer after) edit: i try again and it take a picture but fc just after...
edit2:after a few uninstall (dspmanager; gtalk...) i sucess to take a picture in 8Mo (it was long....) and i film in 720p but i can t open it (and when i take the film it was very slow about 1image/s...)
I don t try a lot for the moment but it seems to be a really good one!!!
I think i will try it for the week end...
Thanks a lot lwxddlqkillapp
Hmm... wonder if it supports ext4? trying it now with modsbf...
***Edit*** Guess I used the wrong bootfix...
Nevermind figured it out I think
LibertyMonger said:
Hmm... wonder if it supports ext4? trying it now with modsbf...
***Edit*** Guess I used the wrong bootfix...
Nevermind figured it out I think
Click to expand...
Click to collapse
I don t know i m using ext3 too many issues with ext4 and not a big difference...
B_e_n said:
I don t know i m using ext3 too many issues with ext4 and not a big difference...
Click to expand...
Click to collapse
What issues do you have with ext4? I'm not aware of any maybe that will explain some issues I have had since i always run ext4...
Can someone please link me to the right bootfix?
LibertyMonger said:
Can someone please link me to the right bootfix?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1284017
is that it? Works for me...
Sent from my tf9001 with XDA XD.
I know everyone is all about Jellybean and ICS right now, but I was just messing around now that I am on official gingerbread and put this together. Thought I would share just in case it was useful to someone else looking for a stock experience.
It uses the kernel forumber found from this thread:
http://forum.xda-developers.com/showthread.php?t=1653699
It uses the system folder from official b528 and I put together the updater script based on TMC 7.2.
The rom is rooted with busybox installed. Other than that it is stock as a stock rom. And yes, it still looks like a tarts handbag just the way Huawei made it.
Get it here:
http://www.mediafire.com/?9s6f83o6sr3ss2w
Enables HDR camera and reject call by text.
http://www.mediafire.com/?v33d7330c0ensd9
I have only installed this on my phone with it's Atmel touch screen and as far as I can see everything works and is smooth. I have no kernel source so won't be doing anything with the kernel beyond what is is right now! I installed with cwm 5.5.0.4 from Blefish.
As always, I am not responsible for any bricks, fires or nuclear wars that come about from installing this rom.
Please, please backup with CWM before flashing this.
Paul
PaulMilbank said:
I know everyone is all about Jellybean and ICS right now, but I was just messing around now that I am on official gingerbread and put this together. Thought I would share just in case it was useful to someone else looking for a stock experience.
It uses the kernel forumber found from this thread:
http://forum.xda-developers.com/showthread.php?t=1653699
It uses the system folder from official b528 and I put together the updater script based on TMC 7.2.
The rom is rooted with busybox installed. Other than that it is stock as a stock rom. And yes, it still looks like a tarts handbag just the way Huawei made it.
Get it here:
http://www.mediafire.com/?9s6f83o6sr3ss2w
I have only installed this on my phone with it's Atmel touch screen and as far as I can see everything works and is smooth. I have no kernel source so won't be doing anything with the kernel beyond what is is right now! I installed with cwm 5.5.0.4 from Blefish.
As always, I am not responsible for any bricks, fires or nuclear wars that come about from installing this rom.
Please, please backup with CWM before flashing this.
Paul
Click to expand...
Click to collapse
How about settings? Cm7 setting + x5 settings or only x5 settings or only cm7 settings
»»Sent From My U8800««
It is just a stock ROM. No special settings. Just whatever Huawei has included.
Sent from my U8800 using xda premium
PaulMilbank said:
And yes, it still looks like a tarts handbag just the way Huawei made it.
Click to expand...
Click to collapse
Very droll, Sir!
LOL
Thanks for your stock rom, nice experience...
needed this rom! thanks
You are all most welcome. Glad it is helpful to people. There are some cool settings in the build.prop here:
http://forum.xda-developers.com/showthread.php?t=1420728
HDR camera works great, the message to reject a call is cool too. Will release a build later with these enabled.
probably didnt need a whole new build, but have put one up that enables HDR camera and reject call by message.
Could you please post some pictures about interface of hdr camera (after edit build.prop, sorry i havent seen it yet), and some about photo taken by hdr mode, i had heard somewhere, but i dont know what it is, since im using hdr app in googleplay
»»Sent From My U8800««
Rooting
I am Unable to root b528.
Plz help me to do soooooooo...
Hi Paul
Did you take the boot.img from original B5xx ROM? I need unmodified ramdisk of B5xx
If I recall correctly, it was pulled from my backup of b526. I don't think I modified it at all.
Sent from my Ascend G300 using xda premium
Missing call issue?
Hey man how flashing b528 With cwm ? And atmel fix ? How? and this rom rooted ?
u8800 with Forum Runner
cobramax said:
Hey man how flashing b528 With cwm ? And atmel fix ? How? and this rom rooted ?
u8800 with Forum Runner
Click to expand...
Click to collapse
Developer says (in first post) that this ROM works on Atmel touchscreen. And I think this ROM is really rooted.
Mlopik said:
Developer says (in first post) that this ROM works on Atmel touchscreen. And I think this ROM is really rooted.
Click to expand...
Click to collapse
Okey man to night trying thanks B|
u8800 with Forum Runner
cobramax said:
Okey man to night trying thanks B|
u8800 with Forum Runner
Click to expand...
Click to collapse
Please can you tell me if it works to night? Thanks.
Mlopik said:
Please can you tell me if it works to night? Thanks.
Click to expand...
Click to collapse
Okey okey
u8800 with Forum Runner
Mlopik said:
Please can you tell me if it works to night? Thanks.
Click to expand...
Click to collapse
İ flashing b528oc.zip with cwm wipe cache, data, dalwik but again bootlop reset reset and reset
cobramax said:
İ flashing b528oc.zip with cwm wipe cache, data, dalwik but again bootlop reset reset and reset
Click to expand...
Click to collapse
Which recovery version?
Hello xda members! I've got a new ROM for you and this time its a lite ICS based on official by Huawei but A LOT smoother and faster!
Android Version 4.0.4
HAPPY NEW YEAR EVERYONE!!!!
Changelog:
Added graphics tweaks.
As smooth as this ROM can be.
Faster Wifi.
Removed unused apps.
New bootanimation.
Better Signal.
Better Battery.
Better camera/photo/audio quality.
Other performance tweaks.
Installation:
You have to be on OFFICIAL ICS for this to work!
Wipe cache.
Format/ factory reset.
Wipe cache.
Format system.
Install ROM.
Fix Permissions.
IN ORDER TO GET YOUR ROM TO WORK PROPERLY YOU MUST DOWNLOAD : http://www.mediafire.com/?uci2qcrie6lnian
They are some extra files that i removed from system/app in order to make the ROM smaller and upload it on mediafire. Just download them and either move them to system/app before installation or push the to system/app after installation and set permission using Root Explorer.
This rar file contains 2 folders:
1)Extras. These are files you may want to add to your ROM but they are NOT needed.
2)Needed. These are files that are NEEDED in order your ROM to work properly.
Downloads:
http://www.mediafire.com/?4872i1a91ycawd6
Thanks to
Huawei for base ICS
GADANA for base flashable zip
SvTeam
AND ALL XDA MEMBERS, AGAIN HAPPY NEW YEAR EVERYONE!!!
Great!
Waiting
I think that if you release stable 4.2 rom it is better that older ics rom...
Sent from my U8800Pro using xda premium
gleb_grid said:
I think that if you release stable 4.2 rom it is better that older ics rom...
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
I already said that 4.2 WILL NOT get released,at least for now so no word about that.
I tried to install the rom and now the phone doesn't work anymore, I can't get into recovery, the image folder exists but does not go into recovery, you can know what happened? is this a joke?
baggino said:
I tried to install the rom and now the phone doesn't work anymore, I can't get into recovery, the image folder exists but does not go into recovery, you can know what happened? is this a joke?
Click to expand...
Click to collapse
Did you follow my instructions?
Followed the instructions and installed the rom, and now my phone stays at the Huawei logo for few seconds and reboots and I can't boot it to the recovery to install other roms...
E: I installed step 2 from b928 update and it's alive again
Bravo... Avto perimeno apo 5 mines
Bravo! This wait of 5 months.
Sent from my u8800pro using Tapatalk 2
dingila said:
Bravo... Avto perimeno apo 5 mines
Bravo! This wait of 5 months.
Sent from my u8800pro using Tapatalk 2
Click to expand...
Click to collapse
How are the results for you? Is it smooth enough? Could you provide some screenshots for the 1st post please?
Does it mean that the phone still be able to boot after flashing the rom(without needed files) from cwm but I have to move the needed files to system/app then to make it work properly?
Am I right?
JerSki said:
Followed the instructions and installed the rom, and now my phone stays at the Huawei logo for few seconds and reboots and I can't boot it to the recovery to install other roms...
E: I installed step 2 from b928 update and it's alive again
Click to expand...
Click to collapse
I did the same thing......
Tip: you're away from any rom of sigg. SvTeam, this is the second time the flashing their creature, but I'm sure it will be the last........
What is your purpose?
baggino said:
I did the same thing......
Tip: you're away from any rom of sigg. SvTeam, this is the second time the flashing their creature, but I'm sure it will be the last........
What is your purpose?
Click to expand...
Click to collapse
attention..
26decem said:
Does it mean that the phone still be able to boot after flashing the rom(without needed files) from cwm but I have to move the needed files to system/app then to make it work properly?
Am I right?
Click to expand...
Click to collapse
Yes i just removed some big files because of the 200mb limit on mediafire.
Rom doesn't work. Done everything written
SvTeam said:
Yes i just removed some big files because of the 200mb limit on mediafire.
Click to expand...
Click to collapse
have you tested?
26decem said:
have you tested?
Click to expand...
Click to collapse
Nope. We dont have a coder right now so all modifications were done by me to have a stable ICS. I took the zip that bronxitas made and added tweaks and removed files to make it faster and smoother. So i thought it would work because that zip was working fine.
SvTeam said:
Yes i just removed some big files because of the 200mb limit on mediafire.
Click to expand...
Click to collapse
Gadana wasn't even 200MB to begin with.
You can upload the rom in is entirity on another site like http://www.4shared.com/
ninfernix said:
Gadana wasn't even 200MB to begin with.
You can upload there in is entirity on another site like http://www.4shared.com/
Click to expand...
Click to collapse
This is the one I used as my base : http://prntscr.com/nslna
ErisLT said:
Rom doesn't work.
Click to expand...
Click to collapse
Xaxaxax... I don't speak anything... SvTeam, no comments about your super roms
Sent from my U8800Pro using xda premium
svteam is just a giant troll!!
His roms never worked, not a single one.
just ignore it