Database Users

[Q] Couple of annoyances

I have a Nook Simple Touch reader unrooted. Since I use it only for reading rpubs, it works fairly well. I have a Nook Color running CM7 for everything else but the NC wasn't good enough for ePubs so I got a Simple Touch. the setup works pretty well so far except a couple of things:
1. Dictionary. I used a friend's Kindle for a little bit and got hooked to looking up the words by clicking them. NST does similar but you have to touch and hold the word, then click lookup, then close the box. It is considerably easier on the Kindle. I know the Kindle App also does it on Android. Is there any way to get that feature without rooting and installing the Kindle App? If I do install the Kindle App, is there a way to use the page buttons? I don't like making sliding page turn gestures on the screen. In fact, I would like the ability to turn off touch screen completely and be able to use buttons only like the Kindle.
Also the Kindle App uses different fonts than the stock reader or Kindle device. Is there a way to change it?
2. Screen refresh. In my experience, NST fonts get lighter and lighter with each screen refresh until I look up a word or maybe 4th or 5th refresh resets it to dark again. Anyone else feel that? Do they do partial screen refreshes to save battery or something? Is there a way to turn that off? It seems very annoying.
Thanks in advance.

If you're wanting to change anything like that, you need to root your Nook.

yelloguy said:
[...] 1. Dictionary. I used a friend's Kindle for a little bit and got hooked to looking up the words by clicking them. NST does similar but you have to touch and hold the word, then click lookup, then close the box. It is considerably easier on the Kindle.
Click to expand...
Click to collapse
I haven't used a Kindle, but the long-press feature on the NST also provides the ability to highlight text and add notes, as well as dictionary lookup.
I know the Kindle App also does it on Android. Is there any way to get that feature without rooting and installing the Kindle App?
Click to expand...
Click to collapse
On the Kindle app on my (rooted) NST, I have to long-press a word to get the little pop-up menu that allows highlight and notes as well as lookup. Nearly identical, step-wise, but it's a pop-up instead of a menu along the bottom.
If I do install the Kindle App, is there a way to use the page buttons? I don't like making sliding page turn gestures on the screen.
Click to expand...
Click to collapse
Sort-of. You can enable the "Volume Buttons Control" option in the Kindle app settings, then use NookTouch Tools to map hard buttons to the volume buttons.
In fact, I would like the ability to turn off touch screen completely and be able to use buttons only like the Kindle.
Click to expand...
Click to collapse
The trick for non-B&N apps is that most don't use the hard buttons. CoolReader and NomadReader are supposed to support NST buttons directly. Otherwise, you can re-map the buttons using NookTouch Tools, but will likely be limited in other ways. I think you'll just have to experiment with this one. I am not aware of a way to actually turn off the touch-screen, other than just not touching it.
Also the Kindle App uses different fonts than the stock reader or Kindle device. Is there a way to change it?
Click to expand...
Click to collapse
I haven't found a way, and I'm not fond of the default! I see options to change the color scheme (white, sepia, black) and make the font larger or smaller, choosing between 5 size options.
2. Screen refresh. In my experience, NST fonts get lighter and lighter with each screen refresh until I look up a word or maybe 4th or 5th refresh resets it to dark again. Anyone else feel that? Do they do partial screen refreshes to save battery or something? Is there a way to turn that off? It seems very annoying.
Click to expand...
Click to collapse
It's to save battery, and my understanding is that apps have to explicitly make calls to refresh more frequently, so only B&N apps and a few others do this. I've read that CoolReader and NomadReader support the NST directly, including screen refresh options. There are threads on this topic elsewhere. Otherwise, one tip I read here was that you can force a refresh by double-pressing the 'n' key to toggle the B&N shortcuts menu. It's a bit kludgy, but it works.
All these factors considered, I've found the B&N reader the best for epubs.

Thanks for the responses. Rooting is not out of the question but I like the way it works for my purposes (sort of) so I don't want to do it if I don't have to.
Bob, I hardly ever take notes or highlight text. All I touch a word for is to look up or verify its meaning. I think Kindle does it right. Thanks for sharing the volume button trick. That seems pretty useful. As you said I will probably have to try rooting it and then I will see if what I get works any better than what I have. Otherwise I will put the stock software back and get back to the business of reading.

yelloguy said:
Thanks for the responses. Rooting is not out of the question but I like the way it works for my purposes (sort of) so I don't want to do it if I don't have to.
Click to expand...
Click to collapse
Rooting doesn't really change the way things operate, unless you want it to. About the only downside to rooting is that you have to be careful to block OTA updates until a root is developed or tweaked for the new software, as B&N often goes out of their way to kill root and "unauthorized" functions.
Bob, I hardly ever take notes or highlight text. All I touch a word for is to look up or verify its meaning. I think Kindle does it right.
Click to expand...
Click to collapse
That must be the actual Kindle device, then. On the Kindle Android app, it's a nearly-identical two-step (long-press->lookup).
Thanks for sharing the volume button trick. That seems pretty useful. As you said I will probably have to try rooting it and then I will see if what I get works any better than what I have. Otherwise I will put the stock software back and get back to the business of reading.
Click to expand...
Click to collapse
It really depends on how you like to use the side buttons. I'm using the left pair for B&N forward/back, and the right pair for Back/Menu, so I don't have any left for volume control. Since I primarily use the B&N reader, it works out OK. Interestingly, a few readers seem to be supporting the NT buttons natively now, but the Kindle app is probably not going to get NST support anytime soon.
You might also check out Cool Reader, as it can read non-DRMed .mobi files.

bobstro said:
It really depends on how you like to use the side buttons. I'm using the left pair for B&N forward/back, and the right pair for Back/Menu, so I don't have any left for volume control. Since I primarily use the B&N reader, it works out OK.
Click to expand...
Click to collapse
[offtopic]
So I'm not the only one that does that!
[/offtopic]

bobstro said:
Rooting doesn't really change the way things operate, unless you want it to.
Click to expand...
Click to collapse
I have seen how rooting works on the Nook Color and I am not too fond of it. I wish there was a way to add the new apps in B&N interface. I don't like having to choose the launcher on every home button press.
bobstro said:
That must be the actual Kindle device, then. On the Kindle Android app, it's a nearly-identical two-step (long-press->lookup).
Click to expand...
Click to collapse
Really? I just tried the Kindle app installed on my Nook Color. When I press and hold a word, it shows the definition in a section and shows a menu with the three choices at the same time. That is not what Nook Touch does and is what I want.
bobstro said:
It really depends on how you like to use the side buttons. I'm using the left pair for B&N forward/back, and the right pair for Back/Menu, so I don't have any left for volume control. Since I primarily use the B&N reader, it works out OK.
Click to expand...
Click to collapse
I like to use the Nook Touch for a dedicated reader too. I like both side buttons to be next/previous since that way I can hold it in either hand with my thumb resting on the top button. To be perfectly honest, the buttons feel kinda squishy and not very clicky. Kindle does that right too. Maybe I should just get a Kindle, heh.
bobstro said:
You might also check out Cool Reader, as it can read non-DRMed .mobi files.
Click to expand...
Click to collapse
When I tried Cool Reader on the Nook Color, the default layout and fonts were very poor. I am sure I can change all that, but its too much work. Especially considering there are so many alternatives with good layout out of the box. But I might break down and spend all that time rooting, installing, setting up, if I get everything I want. Maybe I should get the $80 Kindle that has no touch screen, clicky buttons and word definitions right out of the box. Seems like my dream device, heh...

yelloguy said:
I have seen how rooting works on the Nook Color and I am not too fond of it. I wish there was a way to add the new apps in B&N interface. I don't like having to choose the launcher on every home button press.
Click to expand...
Click to collapse
Do you mean on the NC or the NST? On the NC, just use Nook Color App Manager to add apps from Market to the B&N interface if you like. You don't have to choose a launcher on every press. You can set a default. You just need to make sure you've got a way to get to the "other" launcher when you want it. I'm rooted on B&N 1.4.1 on my NC and have the 'n' key set to pull up the B&N shortcuts menu (stock). If I press home there, I go to the B&N interface. I have a shortcut to ADW EX Launcher on the notification bar, as well as Button Savior. In ADW EX, I've got an icon for the B&N launcher. You can change the 'n' key to pull up whichever you prefer (with no selection required).
Really? I just tried the Kindle app installed on my Nook Color. When I press and hold a word, it shows the definition in a section and shows a menu with the three choices at the same time. That is not what Nook Touch does and is what I want.
Click to expand...
Click to collapse
Well, I stand corrected. I checked this before responding last night, and I'd swear it opened a little popup menu with lookup as an option. Just checked, and it's doing as you say.
[...] I like both side buttons to be next/previous since that way I can hold it in either hand with my thumb resting on the top button.
Click to expand...
Click to collapse
You could map both sets to Vol Up/Vol Dn for that.
To be perfectly honest, the buttons feel kinda squishy and not very clicky. Kindle does that right too. Maybe I should just get a Kindle, heh.[...] Maybe I should get the $80 Kindle that has no touch screen, clicky buttons and word definitions right out of the box. Seems like my dream device, heh...
Click to expand...
Click to collapse
$80 is for the version with ads, right? If you're looking for that exact of a functional match, I think that might be your best bet. The Kindle app works on the NST, but it's far from perfect. Oh, and Kindle cases might not fit either!
Of course, the day you buy a Kindle, you'll need an epub reader.

Bob,
Thanks for the tips on Nook Color. I did not know that you could add apps to the B&N interface. I will definitely try that as I like the stock reader much better. But then, since I got the Nook Touch, I haven't read ePubs on the Nook Color at all.
bobstro said:
Of course, the day you buy a Kindle, you'll need an epub reader.
Click to expand...
Click to collapse
True. But Calibre wouldn't let me feel the difference.

So, finally I had some time to try rooting my NST. After waiting a day I installed the Kindle app from market and it is not even close to the stock reader in the ease of reading. That is the only reason I rooted mine and if that is not going to work, then I want to restore it back to stock. Will search for instructions on that next. But I did not like the layout on the kindle app. The font sizes just don't fit and the margins are too much and not adjustable. Finally the screen refresh is not the same. When I switched from the Kindle app back to the stock reader, it seemed so much better.

yelloguy said:
[...] When I switched from the Kindle app back to the stock reader, it seemed so much better.
Click to expand...
Click to collapse
Well, I'm a little confused now. From your last two posts, it sounds like the NST is your preferred epub reader. I assume you've overcome your objections to the "not-Kindle" configuration then? In that case, and given that you're proficient with Calibre, why not just stick to epub format (converting your Kindle books) and read on the NST?
The only reason I'd bother with the Kindle app is if I had an extensive number of DRM-protected ebooks. Even then, I'd consider stripping the DRM and converting to a single format.
I find managing a single collection of ebooks per device much simpler, if only because I only need to remember one set of controls.
One other reason to keep your NST rooted is to gain more control over when wifi gets turned on. Other than that, and the ability to check email, I haven't added a lot to mine. Just a thought before you roll it back to stock.

Thanks for the comments and sorry for the confusion. I do like the stock reader on the NST. But I was just trying to fix the couple of annoyances mentioned in the original post. If I could get the dictionary on touching a word like the Kindle, I would be happier, for example.
But yeah, I rolled it back last night. Haven't copied any books yet because I started reading on the Kindle app on the Nook Color.

I know you've resolved some of your issues, but there was some discussion of readers for Android. My favorite by far is Mantano. It doesn't have the nice dictionary lookup of the kindle, but the rendering and customization are awesome.
There is a free version.
Sent from my SPH-D710 using Tapatalk

[Q] NST & Touchnooter install kinda sorta

Renate NST suggested I post this in this forum
To all the developers - Thanks in advance for all the GREAT work!
The Saga
Installed touchnooter-2-1-31 and NST hung on install.
Waited an hour and rebooted
NST booted to "walking dots"
Used n2T-Recovery_0.2
Went thru "start-up" dialog (register, etc) and got the machine running again.
Noticed that NST SW was at 1.0
Updated NST to 1.1.2
Installed touchnooter-2-1-31.
Boot screen was "Read Forever"
Android fired up.
Missed the select ADW - should have done that
Button Savior wanted Superuser - should have done that
Buttons on side grayed out
Used n2T-Recovery_0.2 again
did not get me to the "register" start-up dialog
Updated NST to 1.1
Installed touchnooter-2-1-31 again
Boot screen is still "Read Forever"
Same action on buttons - grayed out
So .... my take on this is given the multiple installs I have scrambled something but good.
Is there a way to get to square zero?
Will the erase and de-register do that?
Is there a way to correct the ADW / Button Savior issues?
Is there a way to get to Android despite to side buttons?
Thanks in advance for any help.
The NST works as a reader - so I'm not dead - just wounded

I think you're jumping the gun on doing recovery. When you reboot, aren't you at the ADW Launcher screen? It's been a while since I rooted my NST using TouchNooter (TN), but I believe you can launch the Superuser app after a basic TN root and change the settings for any apps you goofed on (e.g. Button Savior). Just launch Superuser, click the icon of the desired app at left, then click the little android icon at right to toggle the Status between Allowed and Denied.
Erase & Deregister Device in Settings->Device info should suffice to get you back to an unrooted state for a repeat attempt, assuming you can get to it. I've used it many times. If not, power off, then press & hold the lower left & right buttons as you power back on for a few seconds to get a factory reset option. I believe this would have helped you after that first TN hang. You could just retry after a factory reset and reboot. (Haven't had to do this myself, so not 100% sure.)
Download and install Default App Manager from the Google Market to change your default launcher so you can set it to ADW, or whatever you prefer. This works for changing defaults for any app, so is a good thing to keep around.
For the side buttons, do you mean the hard side buttons? You can change those settings with the Side buttons option in NookTouch Tools.
Also in NTT, you can change the 'n' button behavior to take you straight to your home app (ADW) if you don't like the QuickLaunch menu (I do). Be sure to check the Show extra action buttons in recent option, and you'll get Back, Home, Menu, Search and Orientation buttons (just like Button Savior) when you long-press the 'n' button, as well as your most recent apps.
As I mentioned in a separate post, I prefer to use NookTouch Tools to override the B&N QuickLaunch options to eliminate the need for Button Savior or similar apps altogether. Between a QuickLaunch option or two, and the extra options in the recent apps dialog, I've got those options covered. I did remap two of the hardware side buttons to Back and Menu just because they're handy.
I've had very good luck using TouchNooter, but you do have to read the step-by-step directions carefully. There are ways around most problems if you can get to ADW.
Good luck with it!

bobstro said:
I think you're jumping the gun on doing recovery. When you reboot, aren't you at the ADW Launcher screen? It's been a while since I rooted my NST using TouchNooter (TN), but I believe you can launch the Superuser app after a basic TN root and change the settings for any apps you goofed on (e.g. Button Savior). Just launch Superuser, click the icon of the desired app at left, then click the little android icon at right to toggle the Status between Allowed and Denied.
Click to expand...
Click to collapse
It boots to the reader ... buttons are there on the right side, but grayed out and non-functional (no superuser on button.savior)
So .. is there something I can boot from off the SD card that would allow me to
1.) Set ADW as the default, and / or
2.) Give Button.Savior the Superuser permissions?
Erase and Dereg is available as I only have access to the reader and not ADW.
Thanks for the help folks!

Were I the original poster, I would recover from my nonrooted backup image and re-root, or if I could not find it or found it but found that it was not 1.8 gig in size, would force factory reset (first, erase and deregister, then 8 failed, IIRC, to get both /system and /data wiped.)
Once I'd done a full reset, if I'd needed to do it that way, I'd boot from noogie and make my backup.
Then i'd reroot, probably using one of the Clockwork-based tools rather than the Touchnooter system, as it seems that
folks are sometimes seeing TN not quite finish (it happened to me on occasion) and the Clockwork tools seem to be
very robust, enough so that the Glownooter uses clockwork.
I actually like to really baseline something like this and be sure there's no odd cruft hanging out in /system or /data that may confuse me later.

WorkenOnIt said:
It boots to the reader ... buttons are there on the right side, but grayed out and non-functional (no superuser on button.savior)
Click to expand...
Click to collapse
You're definitely seeing some odd behavior. I always wound up at ADW on any reboot.
Erase and Dereg is available as I only have access to the reader and not ADW.
Click to expand...
Click to collapse
You should still be able to get to it via Settings->Device Info. In my experience, erase and dereg was sufficient to make another rooting attempt, but you might want to get back to ground zero. The restore option you've been using, a restore from backup as roust suggests, or doing the 8 failed boot attempts are all options. Be sure to update to whatever version of firmware you want before attempting.
Roust: After you do a CWM noot, what version does Device info show? Mine always shows 1.1.0 after TN, even though I updated to 1.1.2 previously. This has to do with some of the framework tweaking, IIRC. My TN may be old by now.

To all,
Thanks for all your help.
I did an Erase and Deregister.
That appeared to work
Checked firmware - was 1.1.0
Tried to reload TouchNooter (2-1-31)
Screen hung again - like the first time.
Waited 30 minutes and pulled the SD and rebooted.
Boot screen still says "Read Forever"
Went thru the startup dialog and selected the ADW launcher and allowed superuser on the button.savior.
I can now "complete the action" with the ADW launcher and the side keys function.
Everything appears to be working ...
Gmail gets to the account ..
Now why does it still say "Read Forever"?
Anyway - again - thanks for the help
This can be closed ... but I dont think it is "solved"

WorkenOnIt said:
[...] Screen hung again - like the first time.
Click to expand...
Click to collapse
When TN completes, you just get the black screen. This is not spelled out in step 8 of Gabrial's procedure, but it is mentioned in the on-screen instructions. Is that what you were seeing?
Boot screen still says "Read Forever"
[...] Now why does it still say "Read Forever"?
Click to expand...
Click to collapse
When I first power mine on, I get the "Read Forever" screen which is shortly followed by the rolling dots as the device boots. After a few moments, I get the slider unlock screen. Is that what you're seeing?
If so, I think that's normal.
Once you unlock, you're at the ADW screen now, right? Or at least you can get back to it in some way?

bobstro said:
When TN completes, you just get the black screen. This is not spelled out in step 8 of Gabrial's procedure, but it is mentioned in the on-screen instructions. Is that what you were seeing?
When I first power mine on, I get the "Read Forever" screen which is shortly followed by the rolling dots as the device boots. After a few moments, I get the slider unlock screen. Is that what you're seeing?
If so, I think that's normal.
Click to expand...
Click to collapse
Screen never blanked .. it did in tries #2 and #3 .. but not #1 and this last one
I thought it would say "Root Forever" ... but hey, as long as it works!
bobstro said:
Once you unlock, you're at the ADW screen now, right? Or at least you can get back to it in some way?
Click to expand...
Click to collapse
It boots to the "Home" reader .. but buttons on side (House) get me to the ADW / Reader selection

WorkenOnIt said:
[...] It boots to the "Home" reader .. but buttons on side (House) get me to the ADW / Reader selection
Click to expand...
Click to collapse
Good to hear it's working. If you don't like the side buttons that Button Savior uses, you can use Nook Touch Tools to provide a couple of alternatives.
You should also be able to change your default Home app using the technique I described above.
IIRC, the "rooted forever" screen only shows during the rooting process. I think Noogie uses that.

[NTG] Does it still Glow?

To put simply after rooting with the NookManager does the simple touch still glow? I'd picked one up but figured before rooting poke around see what the best noob friendly method is and whie at first I thought the whole glowlight thing was a gimmick after using I actually like having the option.

Goggles2114 said:
To put simply after rooting with the NookManager does the simple touch still glow? I'd picked one up but figured before rooting poke around see what the best noob friendly method is and whie at first I thought the whole glowlight thing was a gimmick after using I actually like having the option.
Click to expand...
Click to collapse
yes

osowiecki said:
yes
Click to expand...
Click to collapse
Anything special i should know or does buttonsavior have the glow thing in it's options list?

By default the "long press nook button to turn it on" and "short press, click glowlight, tick checkbox and/or adjust level" methods still work. I know at least the long press, and possibly the on screen button, can be remapped to other things if you wish in the "Nook Touch Mod Manager" app, but as I said the defaults for those match stock. Just checked, there are options to remap both.

Groovy. Borrowing a card to root/backup as i type this. Not expecting a whole lot. Mostly just expanded/better PDF reading and the ability for light note-taking (mostly due to touch screeen keypads blowing major chunks.)
If I can get a mush app running that'd be pretty neat, but for now it's PDF's and lite mail and RSS reading. Glad to know I'll be able to do all that even in the dark.

[Q] Some very simple questions!

Hi
Got my £29 Nook ST delivered on Friday to complement my Kindle Keyboard 3G which we use a lot.
Originally I intended to use the Nook in its vanilla flavour, but having read that rooting was possible and the Kindle app worked, thought I'd keep all of my reading in the same place by installing the Kindle app.
So far I've done the following:-
- rooted successfully (NST 1.2.1)
- installed Gapps successfully
- installed the Kindle app by browsing play.google.com and "pushing" it to the NST
- sync'd up my books and read a few on the Nook.
I'm no programmer, but I have rooted both of my other Android devices, as well as installed custom roms and kernels on my phone, so in general things going sweetly and as expected.
There are a couple of simple questions I'd like to post though which will help me (and perhaps others) speed through the process of getting the device into a truly workable format
1) I installed the Kindle App via the play store - thus this is the latest version I suppose. Is there a "better" older version for using on the NST which will bring any benefits?
2) If I choose one of the launches (stock or ReLaunch) as the default, will I lose the ability to get back to the menus?
3) Is there a list of what the various button mapping options from Nook Touch Mod mean? They don't appear to make much sense, though I have successfully modified the page ups and page downs to be volume up and down, which works OK with the Kindle reading app
4) Do I need to have an SD card permanently in the NST for storage, or is that not necessary for books?
5) If all I want to do on the NST is either read books using the Kindle app or read books using the NST's core functionality, is there a neat and tidy way of hiding the ReLaunch launcher etc? Its all usable to me, but I could see my family getting a little stuck when using it, certainly compared to the simplicity of using the stock app or using my Kindle Keyboard
6) Some of the rendering of the font from the Kindle app looks a little less than precise. What can I do to improve this?
Thanks in advance for the help!
Matt

larkim said:
2) If I choose one of the launches (stock or ReLaunch) as the default, will I lose the ability to get back to the menus?
Click to expand...
Click to collapse
What menus are you referring to?
larkim said:
3) Is there a list of what the various button mapping options from Nook Touch Mod mean? They don't appear to make much sense, though I have successfully modified the page ups and page downs to be volume up and down, which works OK with the Kindle reading app
Click to expand...
Click to collapse
Not that I know of. Ask questions on specific options. You can use the Tap Left and Tap Right instead of Volume up/down so that the hardware page up/down buttons work for both the stock NST reader and the Kindle app.
larkim said:
5) If all I want to do on the NST is either read books using the Kindle app or read books using the NST's core functionality, is there a neat and tidy way of hiding the ReLaunch launcher etc? Its all usable to me, but I could see my family getting a little stuck when using it, certainly compared to the simplicity of using the stock app or using my Kindle Keyboard
Click to expand...
Click to collapse
Use NTMM to map your n button long press to ReLaunch. Then when you short press the n button and the B&N quicknav comes up tap on Home then click on the use as default checkbox and select Home. Now your NST looks like stock unless you long press the n button to get into ReLaunch. You could also remap one of the quicknav buttons to Kindle if others want to use Kindle without going through Relaunch.

straygecko said:
What menus are you referring to?
Click to expand...
Click to collapse
I think I was meaning between the "ReLaunch" launcher and the "Stock" launcher. i.e. if I restrict myself to using one, how to I access the other.
Thanks for the rest of your help!
Matt

larkim said:
I think I was meaning between the "ReLaunch" launcher and the "Stock" launcher. i.e. if I restrict myself to using one, how to I access the other.
Thanks for the rest of your help!
Matt
Click to expand...
Click to collapse
By the stock launcher you mean Home I assume. In any case use NTMM to assign a hardware button to whatever you don't want to be the default launcher and set what you do as the default launcher. I described how to make Home the default and still have access to ReLaunch in my previous post answering another of your questions. I'd recommend always assigning ReLaunch to some hardware button just in case you accidentally make something else the default you can get back to ReLaunch to fix things.

straygecko said:
By the stock launcher you mean Home I assume. In any case use NTMM to assign a hardware button to whatever you don't want to be the default launcher and set what you do as the default launcher. I described how to make Home the default and still have access to ReLaunch in my previous post answering another of your questions. I'd recommend always assigning ReLaunch to some hardware button just in case you accidentally make something else the default you can get back to ReLaunch to fix things.
Click to expand...
Click to collapse
I always found that the launcher you chose as default is not persistent... that by power cycling you'd get a choice again. Could be just mine though?

amjl2000 said:
I always found that the launcher you chose as default is not persistent... that by power cycling you'd get a choice again. Could be just mine though?
Click to expand...
Click to collapse
If you check the box to use the launcher as default before selecting the launcher then it will persist across power cycles. That's how it works for me and there are a few threads here about people who have selected a default and can't get back to ReLaunch having to factory restore and reroot.

Resetting the 'Home' button?

Hi again..
I seem to have set the Nook ST glowlight to go to relaunch instead of the B&N homepage . Now when I click on 'n' and 'Home', it goes to the Relauncher instead.
Is there a way to reset this so it goes to the B&N page again?

I *think* that if you just install another launcher (anything from the market) you will be presented with the possible choices again when you try to access "Home". Then you can select the default B&N Home screen and later uninstall the added launcher.

Yeah, I installed Launcher 8 recently and this didn't trigger that option again. It is there when I do some things, but I think I asked it to remember my choice for the Home button. I am used to Windows OS and when you do something like that, you can always rectify it, by using either default programs or file associations etc. Android must have something similar, no?

When you make a default choice there is a message that tells you where you can reset the option but it seems to refer to a utility that is not accessible the way the Nook is configured. Can't remember exactly what it says but I've run into the problem before and what I offered seemed to work for me. Did you reboot after installing the additional launcher? I guess the other alternative is to UNinstall all of the Android launchers you've added and reboot. Then there would be no alternative to the Nook "Home". Assuming that works you could then reinstall your launcher of choice. It's a pain, I know. I've "rebuilt" my Nook many times while trying to get over the learning curve. Finally bought an additional SD card so I could save a backup every so often when I'm trying out something new. That's come in handy.
No, it's not like Windows at all (which some people would probably say is a good thing).

No need to uninstall anything. With reLaunch go to the app "nook touch mod". Using this app you can map the nook button to anything you want including the B&N Home page.

Unfortunately this doesn't work either. You can set the 'n button' to do anything but bring up the small taskbar at the bottom, which then takes you to the Home page you have set up.
What I wanted back was the ability to hit the n button, and then be offered the choice of relaunch or B&N home. I can still get to the B&N homepage when the unit starts from being powered down. It's not the end of the world, but a little frustrating.
I haven't even tried to sideload apps or anything yet. And my one attempt to download a book ended when it seems my download location is set as an SD card.. I used to think I was tech savvy. It's only going to get worse. :silly:

gozo81 said:
Unfortunately this doesn't work either. You can set the 'n button' to do anything but bring up the small taskbar at the bottom, which then takes you to the Home page you have set up.
What I wanted back was the ability to hit the n button, and then be offered the choice of relaunch or B&N home. I can still get to the B&N homepage when the unit starts from being powered down. It's not the end of the world, but a little frustrating.
I haven't even tried to sideload apps or anything yet. And my one attempt to download a book ended when it seems my download location is set as an SD card.. I used to think I was tech savvy. It's only going to get worse. :silly:
Click to expand...
Click to collapse
There is a Android App "Default App Manager" on Google play that may work.

gozo81 said:
Unfortunately this doesn't work either. You can set the 'n button' to do anything but bring up the small taskbar at the bottom, which then takes you to the Home page you have set up.
What I wanted back was the ability to hit the n button, and then be offered the choice of relaunch or B&N home. I can still get to the B&N homepage when the unit starts from being powered down. It's not the end of the world, but a little frustrating.
I haven't even tried to sideload apps or anything yet. And my one attempt to download a book ended when it seems my download location is set as an SD card.. I used to think I was tech savvy. It's only going to get worse. :silly:
Click to expand...
Click to collapse
I had a vague notion that NookTouchModManager didn't work with Glowlight, but I might be wrong. If it does work, then you don't want to set the "N" button to bring up Home. Rather you want to set the QuickNav Home button to "default". That's going to get you the B&N page you seek. But that means you will need a way to access your app drawer/launcher as well. For that purpose either one of the other QuickNav buttons could be reassigned OR you could assign a long press of the "N" button to initiate the launcher.
If NTMM doesn't work with Glowlight then I stand by the original idea: uninstall any launchers and reboot. With no alternative, you should get the B&N Home screen unless you have in some other way reassigned the QuickNav Home button.
Don't get discouraged. As a noob (still...) I had to start over quite a few times and there were times I was sure I had bricked my Nook. But I didn't.