Related
Hi everybody
I have Motorola Defy, but after I plug in the usb cable to defy and PC , rsd lite 4.9, 53.1. or 5.5 doesnt recognize my device..
After plug in it shows only white led and nothing more, nothing at all...
I tried every method , but unsuccessfull...
Everytime i try tu plug in, it just shows white led, nothing more, screen is black, and PC doesnt recognize it at all...
What should I do to unbrick it ???
Pls help, I'm desperate ... Thank you
PS: I tryed every method, I searched almost everywhere
When you plug it in first make sure battery full charge then load rsd lite and under settings change it to first come first serve. I had same issue and this worked.
Sent from my MB501 using Tapatalk
I'm having the same issue.hopefully it works I'll get back to you after that
Sent from my SGH-T989 using Tapatalk
Have you tried entering bootloader and then connect the phone to PC? I got RSD lite recognizing my phone this way.
yuffany said:
Have you tried entering bootloader and then connect the phone to PC? I got RSD lite recognizing my phone this way.
Click to expand...
Click to collapse
I can't power up the phone, I can't enter boot menu or even download mode, nothing, before brick: I just plug usb into phone and usb and i could flash througt rsd whatever I want to but now I plug the usb cable into a phone and PC dooesn'r recognize my defy...
Just white led and black screen...
djmajino said:
I can't power up the phone, I can't enter boot menu or even download mode, nothing, before brick: I just plug usb into phone and usb and i could flash througt rsd whatever I want to but now I plug the usb cable into a phone and PC dooesn'r recognize my defy...
Just white led and black screen...
Click to expand...
Click to collapse
??
Have you tried my suggestion.. I had same issue.. black screen with white lite.. you need to have full battery then plug the phone in and run rsd lite with settings on first come first serve..
if
your phone does load with a full charge then hold volume up and power button to get into the bootloader menu.. after than then plug into rsd lite..
to make things easy let us know what happens after you put a batter with full charge on it.. then we can go from there..
yes , I have full battery, I set the rds lite to option firt-come-first-serve, but nothing happend
I can't get into bootloader, I can't power the phone up, I can't get into mode... Nothing
Still the same probem, still not solved, Any idea what could be with it ??
Check the drivers
Sent from my GT-P1000 using xda premium
djmajino said:
yes , I have full battery, I set the rds lite to option firt-come-first-serve, but nothing happend
I can't get into bootloader, I can't power the phone up, I can't get into mode... Nothing
Still the same probem, still not solved, Any idea what could be with it ??
Click to expand...
Click to collapse
try these steps..
take phone battery out and wait few seconds..
then put batter back in and hold volume up and power button for few seconds.. let go of power button and then let go of volume up button..
your phone screen will still be black and no light will be lit up..
then connect usb cable to phone then to pc.. after that you load up RSD lite with the setting of first come first serve.. you should see a line in middle of window that says.. "connected" at this point your phone might display white light ..it sometimes doesn't but as long as rsd lite shows connected your fine.. at this point you should be able to run sbf files
The defy doesn't even power up when I push the power button
djmajino said:
The defy doesn't even power up when I push the power button
Click to expand...
Click to collapse
are you reading the steps??? clearly says that the screen might not light up or lights might not turn on..but thats ok..
before we do all this did you make sure your battery is fully charged?
please read my last steps carefully and try it out..i was in same boat and worked for me
dilfatx said:
are you reading the steps??? clearly says that the screen might not light up or lights might not turn on..but thats ok..
before we do all this did you make sure your battery is fully charged?
please read my last steps carefully and try it out..i was in same boat and worked for me
Click to expand...
Click to collapse
I tried McGyver hack, phone was connected, I did flash 2.51.1 UK version non carries, but nothing did,
On screen was:
SW update
In progrees
at RSD was Phone is being rebooted and PASS, but nothing on phone screen
Defy is working againg, but I was at the service
so using the MacGyver hack method enabled your computer to see your phone again?
I have the same problem (flashed wrong rom, phone bricked with just a black screen, flashed the same wrong rom again hoping for a different result, still bricked, read up on what was going wrong, came back the next day and my computer (including RSD Lite) could no longer see my Moto Defy. Next step i'm either going to have to (1)borrow another Moto Defy battery that is guaranteed fully charged (i have no way to check the amount of charge in mine while my Defy is out of action) or (2)cut up a USB cable and do the MacGyver hack.
1. Make sure your battery is charged.
2. Make sure you've all the latest drivers from Motorola's Website installed.
3. Make sure your RSD Lite version is atleast 4.9. I use v5 and had no problems till now.
4. Boot into bootloader mode.
5. Flash
If it doesn't work:
Try MacGyver hack.
In case you don't know what it is, search here in xda forums. You'll find it.
Update your drivers and do the same as above
Sent from my MB525 using xda premium
Same as above worked 4 me I needed to put on the latest gb rom the non downgrade one.
defy cm7
komakaze said:
Next step i'm either going to have to (1)borrow another Moto Defy battery that is guaranteed fully charged (i have no way to check the amount of charge in mine while my Defy is out of action) or (2)cut up a USB cable and do the MacGyver hack.
Click to expand...
Click to collapse
Option 3 is to buy a cheap standalone wall charger for the Defy battery off eBay, like this one, to keep your battery charged between attempts to flash the phone. Gotta be less risky than the McGyver hack.
Not sure if the standalone wall charger will work, seems to me that the phone doesn't actually recognise the battery, however I have no means to test this and it's just a guess.
If it does actually detect your battery level but just can't charge it then what you listed is fine.
hope for defy with only white led light turning on. This assumes that you have already have mototola drivers and RSD lite installed.
Background : I only had defy one day when I decided to flash it with miui. I bricked on the first time with bootloops. Did research and got drivers and rsd lite. managed to find three stock t mobile roms and flashed to stock Tom, then flashed miui, since then I've been switching between miui and cm7.
Problem : After a few months of use, I decided to flash stock rom to see how the battery life would be like. Bricked it the first time with bootloops. I thought I had flashed it with wrong rom because the first time I flashed back to original rom I did not delete the roms that I thought were the original roms. So after first failure I tried to flashed with the other roms I had. after the third rom it would not go into bootloader, only white led would turn on. Tried macguiver, did not work so save your usb cable, don't mess with it ain't gonna work.
Two part solution: I realized that when I plugged phone with usb I would hear the usb tone on win 7. When to device manager and saw the other device or something like that was appearing and disappearing when I would connect and disconnect phone. I clicked it and it said Motorola device or something like that, it was sensing my defy! defy drivers were wipe out due to bad flash. I had mototola drivers so I clicked on update and searched for mototola drivers on hard drive. I had rsd lite on and it recognized the defy after driver update, even though the bootloader screen was not on and just the white led was on.
decided to flash rom that have me bootloop and it flashed it but still gave me a bootloop., by the way, the update part of bootloader showed up after a while.
Second part of solution: Please Google defy stock rom!!! googled problem and found out that the phone has a stock recovery. its the robot with the triangle exclamation mark. when you get to it you have to touch the extreme lower right hand corner of the screen to get to where you can wipe data and cache. when you start wiping data / cache you have to press on ok?? on lower left hand of the screen repeatedly until wipe is complete. then reboot and tada it boots up to stock tmo USA defy.
this is the stock rom I used : JORDN_U3_6.36.0
F Y I
if you ever try to flash a rom and it just bootloops, just go into stock recovery and wipe data and cache and you should be able to boot into android.
---------- Post added at 05:37 AM ---------- Previous post was at 05:30 AM ----------
Sorry, Google defy stock recovery!!!
Hi, when I tried to flash this rom: http://forum.xda-developers.com/showthread.php?t=1768702 it gave me an error("the process can't be done" or something like that) and after that I pulled out the battery and when I put it back, I turn on the phone and it gave me bootloop, and I can reach the bootmenu but only if the phone is "charging". And one more thing, I can't boot into custom recovery because it give me the error: "E:Error in /system/bootmenu/script/recovery.sh (Result: no such file or directory)", however I can boot to stock recovery but, I tried to wipe data/factory reset and then reboot, but nothing happened, it gives me bootloop.
PS: My pc and RSD Lite doesn't recognize the phone, and I can't charge the my defy because when I try to charge it, it shows me the battery with a question mark inside it.
So, what should I do in this case?
out and in battery untill success i had the same i coulden't switch on the phone ,there was only red led and write google ,i put out and put in battery several times and it worked after.
slon11 said:
out and in battery untill success i had the same i coulden't switch on the phone ,there was only red led and write google ,i put out and put in battery several times and it worked after.
Click to expand...
Click to collapse
I tried that already and it didn't work. And one more thing, my defy doesn't get stuck at google logo, it gets stuck at motorola logo and no led is on(first at motorola logo I have the blue led turn on, and after 1-2 sec it turns off and then it gets stuck at motorola logo, and nothing happens).
what happand when you push vol- when this blue led lights ? try, if nothing happand try push power and vol- in the same time and keep until sth happand ,if this not works hm.....
one thing ,you have defy plus or defy ?, becouse defy plus prabobly works with vol+ or both ,try every option
slon11 said:
what happand when you push vol- when this blue led lights ? try, if nothing happand try push power and vol- in the same time and keep until sth happand ,if this not works hm.....
one thing ,you have defy plus or defy ?, becouse defy plus prabobly works with vol+ or both ,try every option
Click to expand...
Click to collapse
I have defy, and I can turn my defy on only if it is conected to the charger, and when it shows the blue led if I push on the vol+ It goes in bootloader and there it says: "battery low cannot program", and if I push on the vol- it goes in the bootmenu, and from there I can go only in the stock recovery.
Are you sure the battery was charged before flashing CM10?
nastys said:
Are you sure the battery was charged before flashing CM10?
Click to expand...
Click to collapse
No, my battery was low( maybe 15-25%) before flash-ing CM10.
mih406 said:
No, my battery was low( maybe 15-25%) before flash-ing CM10.
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?t=1828639
See How to fix empty battery. Then try again.
nastys said:
Try this:
http://forum.xda-developers.com/showthread.php?t=1828639
See How to fix empty battery. Then try again.
Click to expand...
Click to collapse
Before you post, I tried the mcgyver method, and it worked! Now, I am charging my defy, but it doesn't charge normal, like other phones, it jump from 50% to 70% and so on, and I don't think that this in normal, otherwise, this is the only issue that I've encountered so far.
Hello! I think i bricked my phone. (MB525). With the latest Quarx CM10 everything is fine, the phone charge, etc... But randomly the phone dont charge anymore with wall charger or usb.
Now, i cant boot, the phone dont charge. When i connect to pc i see white led. With battery and wall charger i can access to bootmenu, recovery. But if i disconnect from wall charger the phone shutdown immediatly. So i cant flash any sbf via rsd lite. I try to restore an older nandroid, but nothing changed.
What can i do? Please help.....
Brother just flash or phones sbf Frm rsd lite u will search tutorial here
Sent from my MB526 using xda premium
illumanati22 said:
Brother just flash or phones sbf Frm rsd lite u will search tutorial here
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I cant flash it. Bootmenu or recovery only work with power cord on the wall. If i disconnect and try to attach the phone to pc (to flash) its shut down
XianHuen said:
Hello! I think i bricked my phone. (MB525). With the latest Quarx CM10 everything is fine, the phone charge, etc... But randomly the phone dont charge anymore with wall charger or usb.
Now, i cant boot, the phone dont charge. When i connect to pc i see white led. With battery and wall charger i can access to bootmenu, recovery. But if i disconnect from wall charger the phone shutdown immediatly. So i cant flash any sbf via rsd lite. I try to restore an older nandroid, but nothing changed.
What can i do? Please help.....
Click to expand...
Click to collapse
Hi, there!
I'm not an expert, but maybe I can give you a direction as a starting point.
Either your battery is empty and only needs to be reloaded or it is to old, so you have to get a new one.
A third posibility is, that the battery is empty and had not always contact to get loaded, but that I can't say from here and it's up to you, to check over.
And also your cable and your plug could be damaged.
Your options:
1. Reload your battery (and test its health) in another device or an external loader. You could put it in another Defy of a friend. Or bring it to a service center for cell phones for reloading.
2. You could otherwise buy an new (loaded) battery. Service center again?
3. Finally you could try the following method with the risk of a final damage to your battery:
http://forum.xda-developers.com/showthread.php?t=892026
Tell us, how it has been going for you.
Good luck!
:fingers-crossed:
XianHuen said:
Hello! I think i bricked my phone. (MB525). With the latest Quarx CM10 everything is fine, the phone charge, etc... But randomly the phone dont charge anymore with wall charger or usb.
Now, i cant boot, the phone dont charge. When i connect to pc i see white led. With battery and wall charger i can access to bootmenu, recovery. But if i disconnect from wall charger the phone shutdown immediatly. So i cant flash any sbf via rsd lite. I try to restore an older nandroid, but nothing changed.
What can i do? Please help.....
Click to expand...
Click to collapse
As long as the white LED is there, you are fine. Just charge that thing for some hours.
If you have a nandroid backup you can restore that without the battery but with the wall charger connected.
Swift2603 said:
As long as the white LED is there, you are fine. Just charge that thing for some hours.
If you have a nandroid backup you can restore that without the battery but with the wall charger connected.
Click to expand...
Click to collapse
Thank you guys! I try to charge it via usb, but the phone always started automatically after 5 minutes
That happened to me while ago, I just plug my phone to the wall charger and left it for like two hours and the battery charged quite fine.
XianHuen said:
Hello! I think i bricked my phone. (MB525). With the latest Quarx CM10 everything is fine, the phone charge, etc... But randomly the phone dont charge anymore with wall charger or usb.
Click to expand...
Click to collapse
I don't have any advice really, but just wanted to note that I've experienced something similar. I'm on the Nov 2 CMX build from Quarx.
Every couple of days, my phone won't charge when connected to wall charger or USB, signal bars never change, wifi is dead, and clock is dead. My phone basically stops functioning altogether until I reboot. Rebooting always seems to fix it for me though.
If you need advice on which SBF to flash send me a PM or something. I had to flash an SBF for the first time a month or two ago, and finding the proper SBF was the most difficult part of it all.
Thanks for the help guys, i can flash the sbf, but now i get "code corrupt" and "battery low" errors. I can charge the phone via pc, but its restart in 5 minute. I keep charging it, but after 3 hour its still "low battery" message. With wall charger, the phone enter to bootlader and 1-2 minutes later the "battery low" error disappear but no charging led. After this the phone dont have enough battery life (i keep doing this charging method for 2 hours)
Charge your battery longer.
Check the MD5SUM of your SBF
This post has been beamed to this area by quantum teleportation.
Coodarah said:
Charge your battery longer.
Check the MD5SUM of your SBF
This post has been beamed to this area by quantum teleportation.
Click to expand...
Click to collapse
I tried everything. When usb-pc in, i see the white led. 5 minutes later the phone enter to bootloader mode. Low Battery, Cant program error messages flashing. After 2 minutes the phones say "OK" and RSD lite recognize the phone! BUT! I cant do the whole flashing process, because 3 minutes later the phone shut down. If i wait to charge more in the bootloader more, its still shut down in 3 minutes.
I try to shut down the device everytime if its enter to bootloader, to charge more, but after 8 hours doing this, its still "low battery".
XianHuen said:
I tried everything. When usb-pc in, i see the white led.
[...]
I try to shut down the device everytime if its enter to bootloader, to charge more, but after 8 hours doing this, its still "low battery".
Click to expand...
Click to collapse
I think, we are at a point at which we are running in circles, my friend.
You tried just everything to reanimate your phone.
You must check your battery in ANOTHER device or load it in ANOTHER external charger to be sure that it's okay. Not in your phone and not in your PC.
If the battery charges well, then your phone is either physically damaged or bricked.
(Service Center needed)
Otherwise, if it's (battery) just charging fine and your phone boots up, first flash stock SBF and then flash what you want to.
If the battery isn't charging in that OTHER charger, then you know, you have to buy a new one.
Another thought, not very likely, but maybe your phone is damaged by overclocking/heat and suffers due to this under those permanent blackouts?
Bottom line is: you need another Defy with another battery to find out for yourself to solve your problem.
Unfortunately there is no wizardry
Question:
Is it necessary to go to boot loader for charging?
(I'm not sure about that.)
As a try, just let the phone off connected to power for a couple of hours.
__________
This post has been beamed to this area by quantum teleportation.
Thank you!
I flashed 4.5.3-109-fixed.sbf and i GOT MOTOROLA BOOT LOGO! but always bootloop.
Now, if i flash DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf.gz
its okay? And i get fully working rom? (i know its defy+ but with the fixed sbf its partially working)
Glad to read that. This is good news :highfive:
Nope, unfortunately you won't get it running with a Defy+ SBF without having trouble/more work on your side.
Better download a MB525 SBF playing the game save. But it's your very own decision.
First see here (Maybe you already know all this stuff):
http://forum.xda-developers.com/showthread.php?t=1216982
Then, after lots of reading, swearing and understanding read on here:
http://forum.xda-developers.com/showthread.php?t=966537
_________________________________
Okay, I would take one of the MB525 SBFs from the "Android 2.2.2 "Froyo" section (3.4.2... or 3.4.3...)
NOT any Chinese SBF = no go!
But watch out for your Bootloader version (BL5, BL6) and your type of camera (red or green lense).
After flashing your stock ROM/SBF and the initial rooting, I would first make a NANDROID backup (CWM Custom Recovery) to have a clean ground.
Then I would first flash the stable CM7.2.0 and also do a NANDROID backup (CWM Custom Recovery) to have a solid home base for playing around.
Finally I would flash the latest Nightly of CM10 02.11. + Update from 07.11. completed with gapps minimal or gapps signed from 2012.10.11 (Google apps Android 4.1.2)
Much work to do for you, but remember: Even the longest way starts with only one little first step.
:fingers-crossed:
Hello everyone, i need help. Yesterday i installed cyanogen 11 rom on my milestone, but when the phone boots, it said setup wizard stopped working and i couldnt do anything, after that i flashed my device with 2.3.4 version, from 2.3.6. At that time i didnt knew that that will brick my phone. So now it wont turn on...when i put it on the charger led next to charger/usb flashes, when i connect it to usb led stays on. I read a lot threads on the forum but no luck. I just need to enter to bootloader so that i can flash it again, i tryed it with camera vol down and power but now luck. Anyone knows another way?
Thanks in advance.
I fixed it by using battery bypass. I wont delete thread maybe will help someone.
nikolacirjakovic said:
I fixed it by using battery bypass. I wont delete thread maybe will help someone.
Click to expand...
Click to collapse
How to do a battery bypass on motorola milestone 2?
sssloba said:
How to do a battery bypass on motorola milestone 2?
Click to expand...
Click to collapse
look here and here
Tnx but this don't do the magic for me.. It's the same, only LED lights up and no reaction on button press..
I'll have to try something else.
sssloba said:
Tnx but this don't do the magic for me.. It's the same, only LED lights up and no reaction on button press..
I'll have to try something else.
Click to expand...
Click to collapse
Sorry, but it worked for me...did you fixed it some other way?
Nope, not yet.
I'll try this with another cable. Also, i find a tutorial how to make Motorola factory cable, and i will try that when i find the time.
I can't put links here now, but it's called "How to Make Motorola Factory Cable to Unbrick Your Android! " on Youtube, maybe it can help someone elese.
I'm not giving up. :fingers-crossed:
sssloba said:
Nope, not yet.
I'll try this with another cable. Also, i find a tutorial how to make Motorola factory cable, and i will try that when i find the time.
I can't put links here now, but it's called "How to Make Motorola Factory Cable to Unbrick Your Android! " on Youtube, maybe it can help someone elese.
I'm not giving up. :fingers-crossed:
Click to expand...
Click to collapse
I almost killed my M2 last week, all my fault. When battery is too low, cable bypass is not enough to turn on with vol down + camera. But there is another trick in RSD lite.
Put the bypass cable in the M2 battery & phone then connect bypass cable in a wall charger (computer usb port has not power enough). Now plug the data cable in the M2 usb then connect to PC USB port. Phone still appears to be dead if you try to power on (try it). Go to RSD lite 5.7 and click "Show device" until device properties shows something. Now ignore that your phone looks powered off and go ahead flashing with RSD.
After flashing you will need to do a factory reset as usual, turning on with X pressed until triangle appears. Note that in some M2 you go to wipe menu pressing @ one or more times in triangle screen, while on other M2 you press vol up + vol down to get wipe menu.
Mine was bricked for the same reason, flashed BL, 2.3.6, then because I could not wipe (didn´t know that there was two ways to get menu), I messed up the entire thing, flashing 2.3.4 - phone dead with side led on when connected. Battery does not charge in this state, so after discharged I recovered this way.
Progress
Ok, this helps a bit......I managed to flash my M2 but still no startup screen.
When I did what you wrote, RSD Lite v5.7 did show my device and it started flashing it, in some point the screen on my phone lights up and shows "FW update in progress.." . Everything finishes nice with no trouble...rebote and PASS...
But there is no Motorola icon shown, neither I can start in recovery mode, or bootloader mode or any other that i tried.
When I connect it to PC with data cable, it makes sound like the USB device is plugged in, and it also can be seen in RSD Lite as connected device but nothing on the M2 screen... Same thing happens when i press power button on the phone while it is connected with the data cable.
Any idea why?!
By the way, tnx for helping me this much! :good:
sssloba said:
Ok, this helps a bit......I managed to flash my M2 but still no startup screen.
When I did what you wrote, RSD Lite v5.7 did show my device and it started flashing it, in some point the screen on my phone lights up and shows "FW update in progress.." . Everything finishes nice with no trouble...rebote and PASS...
But there is no Motorola icon shown, neither I can start in recovery mode, or bootloader mode or any other that i tried.
When I connect it to PC with data cable, it makes sound like the USB device is plugged in, and it also can be seen in RSD Lite as connected device but nothing on the M2 screen... Same thing happens when i press power button on the phone while it is connected with the data cable.
Any idea why?!
By the way, tnx for helping me this much! :good:
Click to expand...
Click to collapse
Excuse me, what sbf version are you trying to flash? Do you know your current BL version?
Please note that some sbf requires bootloader upgrade to 70.13 first.
And there is not direct downgrade - i.e. once flashed GB, flashing froyo bricks M2. Actually even between GB versions, once installed a R01 GB sbf you can not flash any R00 GB sbf. Some downgrades only this way.
Also there is not BL downgrade.
lampwarez said:
Excuse me, what sbf version are you trying to flash? Do you know your current BL version?
Please note that some sbf requires bootloader upgrade to 70.13 first.
And there is not direct downgrade - i.e. once flashed GB, flashing froyo bricks M2. Actually even between GB versions, once installed a R01 GB sbf you can not flash any R00 GB sbf. Some downgrades only this way.
Also there is not BL downgrade.
Click to expand...
Click to collapse
I also think he's trying to downgrade. Perhaps he flashed Latin America ROM, and now he's trying to flash UK one. I don't know, but what he describes looks exactly what I experienced when I tried to flash Froyo over GB.
IMHO he should try to flash the latest ROM, that means Latin America 2.3.6 GB.
rabinhood said:
I also think he's trying to downgrade. Perhaps he flashed Latin America ROM, and now he's trying to flash UK one. I don't know, but what he describes looks exactly what I experienced when I tried to flash Froyo over GB.
IMHO he should try to flash the latest ROM, that means Latin America 2.3.6 GB.
Click to expand...
Click to collapse
Yes, that is exactly what happened.
After reading some more about this, I now understand what was my problem....
Playing with my M2 I installed some CM versions, 10, 10.2, 11... and finally when I wanted to go back to stock rom, I find newer version than mine was, and there is the first mistake. I installed it not knowing that I can't do a downgrade later.
Secound mistake was that i TRIED to go back to my old stock rom, and....black screen happend.:crying:
But thanks to your help I now know how to fix it. And i did! :victory: :highfive:
My BL is 70.13 , and when i checked my CG31 with "smgver" it show that it is v4.
I can't go back to my old rom, but now I can install costum or some BR/AR gb except for persona&vivo,which is 4 as Endless7 explaned in his text.
Now there is only one more problem... the battery cannot be charged. There is icon like it is being charged, and also it says charging 1% and always is 1%.
I have original battery and one that is not original...neither one of those two can't be charged.
sssloba said:
(...)
Now there is only one more problem... the battery cannot be charged. There is icon like it is being charged, and also it says charging 1% and always is 1%.
I have original battery and one that is not original...neither one of those two can't be charged.
Click to expand...
Click to collapse
When connected with a wall charger a discharged battery should jump to 20% in config, battery. If locked in 1%, probably there is a mess in the battery state variable.
If you are using a custom recovery, try to clear battery state on it and select the option to fix permissions.
Doing again the master clear/factory clear also may work, but needs to config all the phone again.
Another thing to consider, any short circuit or wrong wiring while doing the bypass cable may damage the charger (or battery, or phone), do you have a spare one to test?
lampwarez said:
When connected with a wall charger a discharged battery should jump to 20% in config, battery. If locked in 1%, probably there is a mess in the battery state variable.
If you are using a custom recovery, try to clear battery state on it and select the option to fix permissions.
Doing again the master clear/factory clear also may work, but needs to config all the phone again.
Another thing to consider, any short circuit or wrong wiring while doing the bypass cable may damage the charger (or battery, or phone), do you have a spare one to test?
Click to expand...
Click to collapse
I tried both of this things, and none of them worked. When powered on, without charger, on the battery icon stands [!]
and when it is connected with a wall charger, icon changes to little lightning ( standard charging icon) inside the empty battery, without movements (battery do not changes colors, red, yellow, green). On lock screen says: Charging 1%, and same on the battery settings (1%).
That was on costum rom.
And on the stock rom in the battery icon stands [?], and when I connect it to the wall charger it says (with original Motorola battery inside):
"Invalid battery
Your device battery is invalid and cannot be charged.
Replace the battery with an original Motrola battery."
I changed the cable, and the charger, but I do not have third battery...short circuit...maybe...maybe.
One interesting fact, the battery seems to be charging, although it says 1%.
The original battery was empty at the begining, she couldn't even start the phone, and now phone is working on that battery....strange. Should it be able to do that, if there was a short circuit?
As far as I know, flashing stock sbf overwrites most config files, also battery statistics. Maybe the easiest solution would be to buy a new replacement battery - at least here, in Poland they go for 7-8$ - quite cheap IMO.
I remember when I was using MS2 that once I had this question mark instead of battery status - it heppened when I drained battery to zero, phone was unable to boot to charging mode, so I booted from another battery, and with a wall charger plugged in, I replaced battery with empty one. Then question mark sign appeared when there was no battery, but I don't remember how I got rid of it. Maybe it disappeared after some time? I don't know. But for sure it disappeared.
sssloba said:
I tried both of this things, and none of them worked. When powered on, without charger, on the battery icon stands [!]
and when it is connected with a wall charger, icon changes to little lightning ( standard charging icon) inside the empty battery, without movements (battery do not changes colors, red, yellow, green). On lock screen says: Charging 1%, and same on the battery settings (1%).
That was on costum rom.
And on the stock rom in the battery icon stands [?], and when I connect it to the wall charger it says (with original Motorola battery inside):
"Invalid battery
Your device battery is invalid and cannot be charged.
Replace the battery with an original Motrola battery."
I changed the cable, and the charger, but I do not have third battery...short circuit...maybe...maybe.
One interesting fact, the battery seems to be charging, although it says 1%.
The original battery was empty at the begining, she couldn't even start the phone, and now phone is working on that battery....strange. Should it be able to do that, if there was a short circuit?
Click to expand...
Click to collapse
Battery sign with a "?" shows when battery is completely uncharged (and before the master clear in my case). Power off the phone, install the bypass cable (again) and put it in the wall charger with phone powered off. Wait 15 minutes charging before power on and wait more 15 minutes charging. Now remove the bypass cable and let battery charge as usual before powering on again.
I did all of that. I downloaded some battery widget, and it shows the battery state 100%. Same is when i go to Settings=About phone=Phone status, battery status is charged 100%. Now the only thing is that in the original battery status icon is still [?].
The important thing is that battery is 100% full and phone is not broken, it works! !
@rabinhood
I flashed costum and stock rom.
I have replacement battery, and same thing happens on it. Also I tried changing them while charging...nothing.
Maybe it will disappear by itself if I wait long enough. :laugh:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Wait until the battery drained and phone shutdown, connect charger again and wait for 5 minutes , it will turn on in erecovery , shutdown and redo fastboot etc carefully.
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
Dissconnect the usb cable and hold the power button. When it is just about to reboot, plug in the USB and hold the volume down button. This should take you to fastboot OR to error mode...
-------
Huawei devices aren't easy to brick, but recovering the devices is a pain... I hard bricked my device as well a couple weeks ago..
I have tried to wait for the battery drained completly and if you plug the usb while the phone is off the phone is powering on automatically and stays to the "Your Device has been unlocked"
Also with the same method before i plug in the usb i was trying to hold the volume down button and plug it in but it didnt happend it is booting on the same thing.
Dr4In said:
I have tried to wait for the battery drained completly and if you plug the usb while the phone is off the phone is powering on automatically and stays to the "Your Device has been unlocked"
Also with the same method before i plug in the usb i was trying to hold the volume down button and plug it in but it didnt happend it is booting on the same thing.
Click to expand...
Click to collapse
pls clear actual screen position of ur fone, unlock screen titled as fastboot and rescue or yellow text with black background.
chances are there u get fastboot connection by turning off mobile by power button hold for 7 seconds and phone turned off wait for a while ensure no USB cable connected to phone. then press volume down button and conect USB cable, you will see fast boot and rescue screen. now issue command fastboot devices. if u see ur devices serial number there then follow further fasboot procedure mentioned in other threads,
Fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system.img
above files may be obtained by extracting update.app for ur phone stock image by huawei extractor. you have to work for 2 days constantly for unbricking phone. I have gone through all these processes last week.
rizwansadiq said:
pls clear actual screen position of ur fone, unlock screen titled as fastboot and rescue or yellow text with black background.
chances are there u get fastboot connection by turning off mobile by power button hold for 7 seconds and phone turned off wait for a while ensure no USB cable connected to phone. then press volume down button and conect USB cable, you will see fast boot and rescue screen. now issue command fastboot devices. if u see ur devices serial number there then follow further fasboot procedure mentioned in other threads,
Fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system.img
above files may be obtained by extracting update.app for ur phone stock image by huawei extractor. you have to work for 2 days constantly for unbricking phone. I have gone through all these processes last week.
Click to expand...
Click to collapse
Hi, I have a similar problem: "your device has been unlocked and can't be trusted". I cannot enter fastboot nor with the two buttons method (power + volume down) or the three buttons method. I messed up with the EMUI, I guess. Infact, I unlocked the bootloader, relocked it and tried to unlock it again to flash a custom ROM. The first time I unlocked the bootloader, I tried to install TWRP but something went bad, I do not remember what, but I decided to relock.
Now I am stuck with this message. But....sometimes, I can't understand WHEN, I can enter my phone Last time it was when I tried the above solution (only volume down and usb cable, without the Power button). When the phone turned on, HiSuite recognized "a phone" was connected because the software turned on, but it couldn't really see it. I went into the Developer Options on the phone to turn on OEM, but it was grey and I could do nothing :crying:
Full of hope because the phone turned on, I then tried to flash the content of the SD Card (where I put files extracted with the Huawei Update Extractor) by holding the three buttons (power + volume up + volume down), but again it appeared the "your device has been unlocked" message.
Now the phone is off. Once, in the meantime, it appeared a red flash on the screen for one second, I am not sure it is related to the battery, it doesn't display a battery but only a flash.
I cannot enter fastboot in any way, I cannot flash from SD card, sure I cannot rollback because it implies flashing.
My only hope is some command to be given when I can enter the phone. Anyway, I sent it to repair (not official, I have obviously no guarantee anymore) and they sent it back to me: they didn't know what to do.
Any idea? Thanks a lot!
PS: I will read your replies as soon as I can but I have very variable ad unstable working hours!
Please don't blame Huawei for YOUR mistakes. Thank you
Johnny TDN said:
Please don't blame Huawei for YOUR mistakes. Thank you
Click to expand...
Click to collapse
Did I? Sorry if it seemed so, but of course are my mistakes...
help us
i have a same problem did you find solution
Same Problem Here
I have the same issue. Have anyone found a solution yet?
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
I think the red light blinks cause you are critically low on power. Leave it plugged in. Ignore whats on the screen just leave it plugged in for a few hours and leave it alone.
Meticulus said:
I think the red light blinks cause you are critically low on power. Leave it plugged in. Ignore whats on the screen just leave it plugged in for a few hours and leave it alone.
Click to expand...
Click to collapse
Same here with a BLN-L21 (Honor 6x)
The phone will not charge with this method. Try to let it plug one night, and no charge !
@Meticulus this was the question felix ask you: is uboot (booting with sdcard) is possible ?
Fixed for me with buy an honor 9 ... but investigate to revive my honor 6x.
For now i have maybe found how to shutdown phone, to charge battery (with shurtcut two point in motherboard) but don't know if phone charge for the moment because there is no light
Solution for the moment but difficult AND / OR expensive ....
1. Remove emmc and repair it with a JTAG box.
2. Try to boot with uboot (but probably won't work)
---------- Post added at 03:32 PM ---------- Previous post was at 02:57 PM ----------
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
Hello, can ask you some question about how you have hardbricked this phone ?
My honor 6x is same bricked, and red light too. So the big question is THE FIRSTIME BRICK = phone was FREEZE can't reboot and can't do nothing. I have wait for empty battery, and now dload and all is not working ?
I will try to charge my battery out of phone. For me it's like the phone never charge ... but i will try with a charged battery and plug unplug battery connector. It's like red screen low battery change boot mode ...
sanjay.rup said:
Same here with a BLN-L21 (Honor 6x)
The phone will not charge with this method. Try to let it plug one night, and no charge !
@Meticulus this was the question felix ask you: is uboot (booting with sdcard) is possible ?
Fixed for me with buy an honor 9 ... but investigate to revive my honor 6x.
For now i have maybe found how to shutdown phone, to charge battery (with shurtcut two point in motherboard) but don't know if phone charge for the moment because there is no light
Solution for the moment but difficult AND / OR expensive ....
1. Remove emmc and repair it with a JTAG box.
2. Try to boot with uboot (but probably won't work)
---------- Post added at 03:32 PM ---------- Previous post was at 02:57 PM ----------
Hello, can ask you some question about how you have hardbricked this phone ?
My honor 6x is same bricked, and red light too. So the big question is THE FIRSTIME BRICK = phone was FREEZE can't reboot and can't do nothing. I have wait for empty battery, and now dload and all is not working ?
I will try to charge my battery out of phone. For me it's like the phone never charge ... but i will try with a charged battery and plug unplug battery connector. It's like red screen low battery change boot mode ...
Click to expand...
Click to collapse
Its not actually mine and it was long time ago, but the owner told me that he unlocked bootloader with the official way, relocked, and then he unlocked again the third time the phone died.
Hello.
me too, he does not want to do anything anymore.
he only knows this '' your device is booting now '' screen with the red LED flashing.
whatever I do, it always starts on this screen. I think you have to change the motherboard.
Do you know where to find it at a reasonable price?
VNS-l31
Your device has been unlocked and can't be trusted
after i try to unlock my huawei P9 lite, my phone show this message "Your device has been unlocked and can't be trusted" and i can't restart or load from sd card.
i put update.app in new folder "dload", put the sd card in phone.... no boot. my laptop not detect usb phone. help me please.
ionut69 said:
after i try to unlock my huawei P9 lite, my phone show this message "Your device has been unlocked and can't be trusted" and i can't restart or load from sd card.
i put update.app in new folder "dload", put the sd card in phone.... no boot. my laptop not detect usb phone. help me please.
Click to expand...
Click to collapse
I fixed mine today. I just had to wait for 5 hours for the battery to drain. then when it shuts off i waited 10 min. after that i started the phone and i let me choose to continue to the phone.
I dunno if you have the exact same problem but thats how i fixed mine.
And after that i tried factory resetting (cause bluetooth and NFC didn't work) but then it got stuck again. so i waited it out and it worked once again.
Too scared to do anything to my phone now :/
alesbabnik said:
I fixed mine today. I just had to wait for 5 hours for the battery to drain. then when it shuts off i waited 10 min. after that i started the phone and i let me choose to continue to the phone.
I dunno if you have the exact same problem but thats how i fixed mine.
And after that i tried factory resetting (cause bluetooth and NFC didn't work) but then it got stuck again. so i waited it out and it worked once again.
Too scared to do anything to my phone now :/
Click to expand...
Click to collapse
now my battery is empty but when i plug in acc cable show same screen
any fix on this as I have the same issue with huawei p9 lite - no recovery mode, no usb reckognition from pc. Just stuck on that "unsafe" prompt screen after huawei logo
Stop buying huawei phones if you are into custom roms or root. They made the phone easily brickable and they removed the bootloader unlock site due to some stores installing malware into phones. But hey, they couldn't simply do what Xiaomi is doing eh?