Related
I am having a problem accessing clockwork mod recovery mode, no matter what process i try it consistently takes me to android recovery instead.
info:
samsung fascinate
rooted
Did odin flash back to stock
Did factory reset back to stock
Did software ota update to the following specs:
HV i500.04
M# sc i500
Firmware 2.1 update 1
Baseband S: 1500.04VD101
Kernel 2.6.29
Build SCH i500 DH101
Installed CWm Recovery from market
Installed Asto file manager from market
Installed Titanium backup from market
Opened CWM application
Went through root permissions dialogue
Flashed CWM recovery to 2.5.1.0
Next i clicked on BACK UP ROM which reboots me into Android Recovery Mode and gives me the standard 4 options for the fascinate:, plus it says installation was aborted:
1.After failing to find update package
2. open update package
3. verify update package
At this point i click on the home button and reboot system now.
Next i try flashing a different CWM Recovery version to 2.5.1.1 , 2.5.1.3 , 2.5.1.4 , all resulting in and error message, so i am still using 2.5.1.0
Next i try toclick on manage and restore backups but there are no backups listed even thouigh i did back up Rom earlier.
next i try to install the Geeknik ROM( Stupidfast v1.23(D101) from the Download ROM section.
I click OK to dialogue box that ask do i want to Down Load Rom
The Stupidfast ROM download starts and finishes
Notification bar says download is complete so i click on notification bar and this takes me to dialogue box which asks do i want to back up existing rom and wipe data and cache . i say yes to both and click OK.
Next dialogue box asks do i want tot reboot. i click Ok
i am then taken back to Android System recovery.
No matter what i do in Clockwork Recovery i always end up back at Anroid System Recovery. i have tried all different scenarios -debugging checked.debugging unchecked,clear cache, dont clear cache, back up rom,dont back up rom, usb connected, usb unconnected, Titanium in,titanium out. watched all different you tube videos on subject.
sorry this was so long. i didnt want to miss any answers to any question any of you might have if at this point you want to offer any help. thanks in advance.
You have to flash CWM with Odin before you can use it. Can't just install from the market or ROM Manager
Kevin, Thanks for your response to my question.
i thought i already flashed CWMRecovery from within ROM Manager. it is the first option at the top of CWMRecovery, also it states under that first choice that my latest recovery id Clockwork Mod 2.5.1.0.
If i scroll down to the bottom of CWMRecovery the last choice shows all of the CWM Recoveries. Recovery 2.5.1.0 is listed at the bottom and is the only one i can flash/install.
In both instances it says that i have flashed this version(2.5.1.0) of CWM Recovery.
I will try whhat you are suggesting and thanks again for the help, it is appreciated
Kevin , I followed your instructions and flashed the CWMrecovery.tar file with Odin3_1.3 and everything is as it should be. The funny thing is (at least to me) that the CWMrecovery version that is listed when i am in recovery mode now is CWM version 2.5.1.0, which is the same version that i flashed within rom manager. Kind of confusing but at least i am where i want to be. Thanks again for the help.
Yeah, it's just one of the quirks with the Fascinate. Unlike most devices, just flashing Clockwork with ROM Manager only puts the update.zip on your SD card. Using Odin to flash the .tar file installs the recovery, so both parts are needed.
where i need to put CWMrecovery.tar in ODIN in which section PDA/PHONE/CSC? 1nx
You only flash things in PDA section, doing otherwise will screw up your phone
Sent from my Fascinate - DJ05/SuperClean/Adryn's 12/30
?
Im kinda new to all this stuff and just wanted to get some step by step stuff if you dont mind. I rooted my Fascinate tried clockwork mod wouldnt work when i tried to backup after downloading the recovery thing and when i read this you guys said something about Odin so I went to appbrain and downloaded tuxility but now im lost on what to do. Maybe something step-by-step would be good. Really appreciate it! (ps: I know im kinda slow but if you wouldnt mind...)
The stock recovery does not allow us to run unsigned zips. Thus, we must flash the CWMrecovery.tar to patch recovery to allow us to run these unsigned zips. Then you can flash CWM from within Rom Manager.
Follow these instructions from fallingup's thread:
http://forum.xda-developers.com/showthread.php?t=788099
THANKS
Thanks ALOT this looks really simple the only thing that idk about is how it said to put it in download mode. Idk what that means. Debugging? and do I mount it? Thats all i think. THANKS agian.
Download mode: power off, pull out battery, with Odin open and USB connected to PC hold volume down and plug in USB.
I'm trying to flash a custom rom made from romkitchen however have hit a wall. Any help pointing out a solution or where i may have gone wrong would be most appreciated. I'll outline all the steps i took, not sure if they are related to the issue or not.
I started of with froyo dtjp5 with no 3 button and 3e recovery. I started by using odin to flash the canadian bootloader fix which worked perfectly and gave me 3 button download mode. I then flashed chainfire cf-root 1.3 kernell which also worked perfectly and i know have working 2e recovery mode. I then donwloaded clockwork rom manager form the app market, and flashed the clockworkmod recover 2.5.1.2. It appeared to be successful. However when i attempt to enter recovery mode, either through the application, or through 3 button mode it, simply boots into normal 2e recovery mode rather than clockwork mod. I have tried applying the flash again but it still did not work.Untill i can boot into clockworkmod recovery i cant apply my romkitchen zip file so im kind of stuck. I must be missing something but cant figure it out, so once again any held would be much appreciated. Thanks
flash for example voodoo or speedmod kernel with odin/heimdall or kernel flasher(haven't used it often so i am not sure about kernel flasher)
Sent from my GT-I9000 using Tapatalk
Make sure CWM is set as update.zip on your sdcard - ROM Manager should actually do this for you - then in 2e recovery select flash update.zip ... the very first time it should just reboot your device (so go into recovery again), the second time it should start CWM.
Not sure why CWM is built that way.
Thanks very much
Ok so I am having a problem with cwm that i hope someone can help me with. I just flashed the latest speedmod kernel using the sgs kernel flasher app. Now when i try to reboot into recovery from cwm so that i can access the tweaks menu, the cwm options dont appear. It says i am in android sytem recovery(3e). where my only real option besides wiping the phone is to apply sdcard:update.zip, which does not work even though cwm is set as update.zip on my sd card. Any help to this noob would be appreciated.
Cap18k said:
Ok so I am having a problem with cwm that i hope someone can help me with. I just flashed the latest speedmod kernel using the sgs kernel flasher app. Now when i try to reboot into recovery from cwm so that i can access the tweaks menu, the cwm options dont appear. It says i am in android sytem recovery(3e). where my only real option besides wiping the phone is to apply sdcard:update.zip, which does not work even though cwm is set as update.zip on my sd card. Any help to this noob would be appreciated.
Click to expand...
Click to collapse
to apply CWM from 3e recovery you need it on your sd card. it has to be named 'update.zip'
the other way to do this, is download odin version, boot into download mode, and flash.
overall process takes less than 5 mins.
Check if you really have it -> settings -> about phone.
And try to flash it using odin, that worked flawlesly for me.
Sent from my GT-I9000 using Tapatalk
The kernel definately flashed correctly. I am not sure why the update.zip isnt workingfro cwm (the signature verification keeps failing), but i am going to try odin and see what happens. I've never used it before, but i am downloading it now.
Hello everyone.
I hope you can help me.
I had an A500 bricked spontaneously (I was checking Twitter, the screen frozen, I turned off the tablet and when I turned it on again, it stucked on Acer logo) so I used the guide to recover recovery (this: http://forum.xda-developers.com/showthread.php?t=1751978, because I rooted my tablet but I didn't install recovery).
Everything was ok, I flashed the V7-Thor v1.7.3 but when I tried to install stock ROM of ICS (wipe data and cache), the tablet got "re-bricked" and only enter in APX mode.
Then I reflashed and installed V8-Thor_1.7.3_recovery and I tried to install Acer_AV041_A500_1.054.00_WW_GEN1-DEODEXED-FULLROOT through update.zip (turned on the tablet in recovery --> Install from zip file --> Install zip file from SD card --> update.zip, then it said "Installed" and I rebooted the tablet, but it stuck on "Booting primary kernel image"...
What I'm missing or doing wrong? :/
What should I do to run ICS in my tablet again?
I'm not familiarized with the ROMs, Recoverys or flash... sorry if my question is stupid or something, but before this I never moved anything to my tablet (except for root it).
And sorry too for my bad English.
Mafvtapatio said:
Hello everyone.
I hope you can help me.
I had an A500 bricked spontaneously (I was checking Twitter, the screen frozen, I turned off the tablet and when I turned it on again, it stucked on Acer logo) so I used the guide to recover recovery (this: http://forum.xda-developers.com/showthread.php?t=1751978, because I rooted my tablet but I didn't install recovery).
Everything was ok, I flashed the V7-Thor v1.7.3 but when I tried to install stock ROM of ICS (wipe data and cache), the tablet got "re-bricked" and only enter in APX mode.
Then I reflashed and installed V8-Thor_1.7.3_recovery and I tried to install through update.zip (turned on the tablet in recovery --> Install from zip file --> Install zip file from SD card --> update.zip, then it said "Installed" and I rebooted the tablet, but it stuck on "Booting primary kernel image"...
What I'm missing or doing wrong? :/
What should I do to run ICS in my tablet again?
I'm not familiarized with the ROMs, Recoverys or flash... sorry if my question is stupid or something, but before this I never moved anything to my tablet (except for root it).
And sorry too for my bad English.
Click to expand...
Click to collapse
I think where you went wrong was choosing "install zip file from sdcard >update.zip"
Go back into recovery again > install from zip file > Choose zip from SD card (
if the file is on your micro sd card)
You should see a list of all your files and choose your rom file:
Acer_AV041_A500_1.054.00_WW_GEN1-DEODEXED-FULLROOT.zip
Once its done, Stay in recovery and go to: Wipe Menu and do all the wipes there
Data -cache and dalvi-cache then reboot
Once you're all set up and before you reboot again, make sure there is not an "update.zip" on your sdcard - if you boot to recovery it may flash automatically and you will end up "stuck" again
good luck
dibb
dibb_nz said:
I think where you went wrong was choosing "install zip file from sdcard >update.zip"
Go back into recovery again > install from zip file > Choose zip from SD card (
if the file is on your micro sd card)
You should see a list of all your files and choose your rom file:
Acer_AV041_A500_1.054.00_WW_GEN1-DEODEXED-FULLROOT.zip
Once its done, Stay in recovery and go to: Wipe Menu and do all the wipes there
Data -cache and dalvi-cache then reboot
Once you're all set up and before you reboot again, make sure there is not an "update.zip" on your sdcard - if you boot to recovery it may flash automatically and you will end up "stuck" again
good luck
dibb
Click to expand...
Click to collapse
Thanks! I did it and it worked, but after the reboot the tablet only shows the animated android logo... what's the problem? The ROM?
When I did the "Wipe data" it said "Formatting data" and after "Skipping erase of /data/media". I checked with the "Mount and Storage" menu in recovery and seems like my data before the brick's still in the internal storage of the tablet... is that normal?
EDIT: what version of cwm to have now? If its not 1.7.3 then go ahead and reflash the v8
Mafvtapatio said:
Thanks! I did it and it worked, but after the reboot the tablet only shows the animated android logo... what's the problem? The ROM?
When I did the "Wipe data" it said "Formatting data" and after "Skipping erase of /data/media". I checked with the "Mount and Storage" menu in recovery and seems like my data before the brick's still in the internal storage of the tablet... is that normal?
Click to expand...
Click to collapse
Yes it is - keeps your data intact but 'resets' the rom to like it is when you first flash, there is an option to wipe data/media if you wish to - theres a toggle to enable it but on every boot to recovery it will be disabled again...
You can try another flash of the rom itself otherwise reflash the v8 bootloader.
Do you have access to "fastboot mode" power vol down - just wondering
dibb
dibb_nz said:
EDIT: what version of cwm to have now? If its not 1.7.3 then go ahead and reflash the v8
Yes it is - keeps your data intact but 'resets' the rom to like it is when you first flash, there is an option to wipe data/media if you wish to - theres a toggle to enable it but on every boot to recovery it will be disabled again...
You can try another flash of the rom itself otherwise reflash the v8 bootloader.
Do you have access to "fastboot mode" power vol down - just wondering
dibb
Click to expand...
Click to collapse
I tried to reflash the same ROM, but this time nothing happened, again only says "Booting primary kernel image"... a question, if I try to flash a stock ROM (like Acer_A500_1.031.00_WW_GEN1.zip from the post of stock roms)... it will let my tablet again only in APX mode when I turn on it, right?
And I see the option "Fastboot mode" when I turn on the tablet holding Vol +.
About your question I don't know how to answer, I flashed V8-Thor_1.7.3_recovery... is that a CWM?
In the top it says CWM Recovery v5.5.0.x(thor2002ro/digetx rev 1.7.3) Iconia A50x...
Mafvtapatio said:
a question, if I try to flash a stock ROM (like Acer_A500_1.031.00_WW_GEN1.zip from the post of stock roms)... it will let my tablet again only in APX mode when I turn on it, right?
Click to expand...
Click to collapse
sorry, not sure I understand your question...are you saying you're now stuck in apx mode - black screen power light on?
There are 2 types of stock rom on here....
1) Official Acer EUU or OTA roms
2) Official Stock roms which are Custom - pre-rooted and able to flash CWM etc -
If you flash one of the Acer EUU or OTA roms you will lose CWM and Root
To be honest - with your tab "spontaneously" booting and being stuck on the acer logo and the issues that have followed - its sounding more and more like a faulty chip - this is something that only acer can fix...I could be wrong about this and I hope I am...but something is just not feeling right...
- you still have cwm and access to fastboot - thats a bonus - maybe do a complete format thru CWM of data/media, system (and flexrom if its there) then try to flash a rom again - if it still won't flash AND if you're not stuck in apx mode then I think you'd be best to download an official update.zip - from Blackthund3rs thread here this one -
Acer_AV041_1.054.00_WW_GEN1:
Once you've d/l'ed it...try opening it if you can't then it will need decrypting the instructions for this are in the OP..
Once you have extracted the "update.zip" and have it on your sdcard - flash via CWM
good luck
dibb
dibb_nz said:
EDIT: what version of cwm to have now? If its not 1.7.3 then go ahead and reflash the v8
Yes it is - keeps your data intact but 'resets' the rom to like it is when you first flash, there is an option to wipe data/media if you wish to - theres a toggle to enable it but on every boot to recovery it will be disabled again...
You can try another flash of the rom itself otherwise reflash the v8 bootloader.
Do you have access to "fastboot mode" power vol down - just wondering
dibb
Click to expand...
Click to collapse
What do you mean "If if its not 1.7.3"? Are there problems with flashing the bootloader with 1.7.3?
no, no, not at all, i meant if he didnt have that version to reflash v8 to get it
oops clicked wrong button
he said he flashed stock rom and ended up with dead android = stock recovery
A500 V8 booting primary kernel image
dibb_nz said:
no, no, not at all, i meant if he didnt have that version to reflash v8 to get it
oops clicked wrong button
he said he flashed stock rom and ended up with dead android = stock recovery
Click to expand...
Click to collapse
Hello everyone!
I have a similar issue whith my a500. but i can restore the backup i did of my honeycomb sistem in cwm (i have acess)
aftter making the backup i have flashed V8-Thor_1.7.3_recovery.a500apx in apxflashtool in order to get ics boot loader and install ICS roms.
so far so good after the flash i had already a ICS rom in my sd card redy to flash so imediatly after V8 flash entered cwm and did clean format and wipe all. Next installed the rom (aroma instalation) no problems what so ever. After instalation is finished reboted and now im stuck on skilax v8 bootloader boting primary kernel image
i tried the folowing
- chage kernel multiboot fix partitions redo clean format etc etc etc (ALL THE STEPS)
-many other ics jellybean rooms (all of the install but dont boot)
- honey comb rooms install and BOOT normaly.
at this point thought maybe it was a bad V8 flash and decided to reflash the V8-Thor_1.7.3_recovery.a500apx
Now the flash tool can get pass uploading image phase.
i have correct sbk and cpuuid since i had to recover last week from boot verified failed error and use the flash tool whith correct sbk to recover the tablet with sucess.
So basicly im stuck wit
h my honeycomb rom backup or other HC roms
any news on this subject?
cybersaicho said:
Hello everyone!
I have a similar issue whith my a500. but i can restore the backup i did of my honeycomb sistem in cwm (i have acess)
aftter making the backup i have flashed V8-Thor_1.7.3_recovery.a500apx in apxflashtool in order to get ics boot loader and install ICS roms.
so far so good after the flash i had already a ICS rom in my sd card redy to flash so imediatly after V8 flash entered cwm and did clean format and wipe all. Next installed the rom (aroma instalation) no problems what so ever. After instalation is finished reboted and now im stuck on skilax v8 bootloader boting primary kernel image
i tried the folowing
- chage kernel multiboot fix partitions redo clean format etc etc etc (ALL THE STEPS)
-many other ics jellybean rooms (all of the install but dont boot)
- honey comb rooms install and BOOT normaly.
at this point thought maybe it was a bad V8 flash and decided to reflash the V8-Thor_1.7.3_recovery.a500apx
Now the flash tool can get pass uploading image phase.
i have correct sbk and cpuuid since i had to recover last week from boot verified failed error and use the flash tool whith correct sbk to recover the tablet with sucess.
So basicly im stuck wit
h my honeycomb rom backup or other HC roms
any news on this subject?
Click to expand...
Click to collapse
Yes just one question what is - " chage kernel multiboot "???? Sounds dodgy
You can boot to fastboot mode then do an erase of data and cache, see if that helps for a start....
Do you stil have recovery and can you still restore your HC backup?
I have seen a post or two where tabs can only boot HC Roms and no ICS
It "maybe" the dreaded hardware fault - you might be best to d/l the babsector.rar and run that - it will give you a proper error if theres something wrong - can get it from the root guide in my sig. Give me a minute or two and I'll post some steps in using it
---------- Post added at 09:12 AM ---------- Previous post was at 08:53 AM ----------
How to use babsector.rar
Download and extract the babsector.rar to a folder on your PC
Turn your tab off and put it in apx mode manually. Press and hold reset button, hold power for 3 secs after the light comes on and release it, after another second release the reset button. Your screen is black and the power light is on.
Connect your tab to your PC
Navigate to the babsector folder and click on 501 A.bat, when its done
Reboot into recovery
Go to Mounts and Storage and Format System twice and Power Off
Go back into apx mode and run 501 B.bat
Reboot into recovery and do the wipes and flash your rom
Reboot
Hello,
first I'd like to say that since the first day, I really....hate my Galaxy S4, this is probably the phone I hate the most actually. This is why I wanted to get rid of this stupid stock ROM (who the hell wants all this preinstalled on his phone ?!)
I flashed it from the CWM Rom manger with Cyanogen Mod 10.1 and it's been stuck on the CM logo since 3 hours, I tried entering into recovery mode, but it boots on the stock recovery.
Please, help me..
You can fix this. You have to reflash stock firmware again since something clearly went wrong and you cant do anything.
1. Download Odin ( http://forum.xda-developers.com/showthread.php?t=2189539 )
2. Download the stock ROM image ( http://samsung-updates.com/device/?id=SGH-I337 ) Large File. Unzip the file to get the .tar.md5 file you will need.
3. Download and install Samsung Kies (Installs Drivers)
4. Boot the phone into "Download Mode" (From http://www.ninjaromeo.com/download-mode-samsung-galaxy-s4/ for i9500 but same procedure)
Unplug phone
Switch off your Samsung Galaxy S4 I9500 Android Smartphone.
Now press and hold “Volume Down + Power + Home” buttons together for a little bit of time.
After appearing Samsung logo release the buttons.
Then you will move on to Warning page.
Read the warning before going to proceed.
As the given on screen instruction, press Volume Up button to enter into download mode.
The you will see the page with Android logo and “Downloading, Do not turn off target!!”
If you don’t want to move on download mode, just press Volume Down button in the proceed page.
5. Plug Phone into PC. Open Odin. Select "PDA" and point it to the large firmware file that you downloaded that has a .tar.md5 extension.
6. Click "Start". This will reflash the stock recovery and firmware. It will retain your Data partition. Odin will inform you when it's done. Then close Odin.
You now have a functioning phone. Yay!
Backup everything you need to back up from your data partition to your PC or a microSD card.
If you want to Flash CM10.1
first run this,CASUAL http://forum.xda-developers.com/showthread.php?t=2297900
It will install TWRP Recovery. Just like CWM but touch. No difference to me has all same features. It installs easier so I used it. It will also root the device and perform the Loki trick to get it to boot and bypass the locked bootloader. RUN IT and follow the instructions laid on in that post word for word and you will get everything working.
So! Now you have a working recover! Yay!. Boot up into Android.
Download the latest CM10.1 Nightly from here. http://get.cm/?device=jflteatt&type=nightly
Download Latest Google Apps from here http://goo.im/gapps
Copy it to your phone. Preferably a mcroSD card.
Reboot to recovery. Go to Install. Select that CM10.1 file and install it.. (Choosing external SD card if you saved it to a microsd). Repeat for the Google Apps zip file.
When done, wipe Data, Cache, Dalverik Cache from the menu in recovery, sometimes under Advanced.
Reboot.
Working CM10.1.
WoodburyMan said:
You can fix this. You have to reflash stock firmware again since something clearly went wrong and you cant do anything.
1. Download Odin ( http://forum.xda-developers.com/showthread.php?t=2189539 )
2. Download the stock ROM image ( http://samsung-updates.com/device/?id=SGH-I337 ) Large File. Unzip the file to get the .tar.md5 file you will need.
3. Download and install Samsung Kies (Installs Drivers)
4. Boot the phone into "Download Mode" (From http://www.ninjaromeo.com/download-mode-samsung-galaxy-s4/ for i9500 but same procedure)
Unplug phone
Switch off your Samsung Galaxy S4 I9500 Android Smartphone.
Now press and hold “Volume Down + Power + Home” buttons together for a little bit of time.
After appearing Samsung logo release the buttons.
Then you will move on to Warning page.
Read the warning before going to proceed.
As the given on screen instruction, press Volume Up button to enter into download mode.
The you will see the page with Android logo and “Downloading, Do not turn off target!!”
If you don’t want to move on download mode, just press Volume Down button in the proceed page.
5. Plug Phone into PC. Open Odin. Select "PDA" and point it to the large firmware file that you downloaded that has a .tar.md5 extension.
6. Click "Start". This will reflash the stock recovery and firmware. It will retain your Data partition. Odin will inform you when it's done. Then close Odin.
You now have a functioning phone. Yay!
Backup everything you need to back up from your data partition to your PC or a microSD card.
If you want to Flash CM10.1
first run this,CASUAL http://forum.xda-developers.com/showthread.php?t=2297900
It will install TWRP Recovery. Just like CWM but touch. No difference to me has all same features. It installs easier so I used it. It will also root the device and perform the Loki trick to get it to boot and bypass the locked bootloader. RUN IT and follow the instructions laid on in that post word for word and you will get everything working.
So! Now you have a working recover! Yay!. Boot up into Android.
Download the latest CM10.1 Nightly from here. http://get.cm/?device=jflteatt&type=nightly
Download Latest Google Apps from here http://goo.im/gapps
Copy it to your phone. Preferably a mcroSD card.
Reboot to recovery. Go to Install. Select that CM10.1 file and install it.. (Choosing external SD card if you saved it to a microsd). Repeat for the Google Apps zip file.
When done, wipe Data, Cache, Dalverik Cache from the menu in recovery, sometimes under Advanced.
Reboot.
Working CM10.1.
Click to expand...
Click to collapse
Hello, I did everything except the CM10.1 part and succesfully managed to boot my phone onto stock rom, but can't even make it work. Just after booting, it's a completely black screen with the notification bar on top (can't reveal it)
Youssow said:
Hello, I did everything except the CM10.1 part and succesfully managed to boot my phone onto stock rom, but can't even make it work. Just after booting, it's a completely black screen with the notification bar on top (can't reveal it)
Click to expand...
Click to collapse
Try the emergency restore / recovery option in Kies. I have never done it but many people have had to after a bad flash. Not sure how you lost your custom recovery. I had issues with a rom I flashed and for stuck at boot but my recovery was fine so I restored my nandroid.
Try wiping your Data partition. Should fix that. Just hook the device up to a computer and copy your stuff off it first. Stock firmware was restored so any lingering problems would be related to stuff in the Data partition. Should be able to boot the stock recovery and do a factory reset which will also wipe the data partition.
As mentioned above you dont need the whole Kies suit. You can just install USB drivers. To make it simple as possible I stated using Kies but you can obtain the drivers elsewhere and install them rather than the whole Kies suit.
WoodburyMan said:
Try wiping your Data partition. Should fix that. Just hook the device up to a computer and copy your stuff off it first. Stock firmware was restored so any lingering problems would be related to stuff in the Data partition. Should be able to boot the stock recovery and do a factory reset which will also wipe the data partition.
As mentioned above you dont need the whole Kies suit. You can just install USB drivers. To make it simple as possible I stated using Kies but you can obtain the drivers elsewhere and install them rather than the whole Kies suit.
Click to expand...
Click to collapse
I can't even browse files from my computer, my phony is only detected by Odin ATM.
The stock recovery gives me two options: Quit, Download mode.....
God I'm so anxious right now
jperry73 said:
Flash back to stock with ODIN
Click to expand...
Click to collapse
This is what I did.
Stock ROM doesn't even work now, when I boot it for the first time it's a black screen with the notification bar on top and I can't get out and need to remove the battery.
OMFG
REMOVED SIM AND SD CARD AND THE PHONE BOOTED !
Thanks for the help guys, I'm very happy that my phone isn't dead ! (And I will never ever try to flash again a phone like the GS4)
Hi
I have an sgh-i377 (att usa), i installed a 4.3 rom using safestrap since i dont have cwm, now it's stuck in the samsung galaxy s4 logo, it wont boot, i tried to download the stock 4.3 from http://samsung-updates.com/device/?id=SGH-I337 but it doesnt list anything, can you please show me where I can download sgh-i377 stock 4.3 from?
I tried going into the android recovery and wiping all caches but nothing. your help is greatly appreciated.
Thanks,
portmap said:
Hi
I have an sgh-i377 (att usa), i installed a 4.3 rom using safestrap since i dont have cwm, now it's stuck in the samsung galaxy s4 logo, it wont boot, i tried to download the stock 4.3 from http://samsung-updates.com/device/?id=SGH-I337 but it doesnt list anything, can you please show me where I can download sgh-i377 stock 4.3 from?
I tried going into the android recovery and wiping all caches but nothing. your help is greatly appreciated.
Thanks,
Click to expand...
Click to collapse
Try flashing i337mk2stockboot.tar from my thread post#3 ... http://forum.xda-developers.com/showthread.php?t=2573080 see if that work. ..... Goodluck. ......
Swyped from MF3 Deadly Venom SS
ted77usa said:
Try flashing i337mk2stockboot.tar from my thread post#3 ... http://forum.xda-developers.com/showthread.php?t=2573080 see if that work. ..... Goodluck. ......
Swyped from MF3 Deadly Venom SS
Click to expand...
Click to collapse
I flashed the boot file you suggested and I see progress, now I have a "system software not authorized by AT&T has been found on your phone.." message..
what should I do next?
Revived it with http://forum.xda-developers.com/showthread.php?t=2502003 (MF3 TARs.tar)
Thanks for your help!
Hi,
I'm having a problem with my boys Galaxy Y S5360, it's stuck in a boot loop i can still get into both revovery and upload modes and still have access to the sd card.
I tried reinstalling factory software but that just removed CWM 5 and i'm still stuck with the boot loop help!!!!!!!!!!!!!!!! :crying:
When you post things like this in the development section don't expect any help.
Post in the right section.
Thread reported.
Get stock rom and reflash your phone with odin.
Edit: You can get the info on how to do it in the correct section.
Sent from my GT-S5360 using Tapatalk 2
jammychap said:
Hi,
I'm having a problem with my boys Galaxy Y S5360, it's stuck in a boot loop i can still get into both revovery and upload modes and still have access to the sd card.
I tried reinstalling factory software but that just removed CWM 5 and i'm still stuck with the boot loop help!!!!!!!!!!!!!!!! :crying:
Click to expand...
Click to collapse
you can either format data in cwm or in stock recovery format data/reset
or if that doesnt sort the boot loop quickest way to solve it is just to flash stock rom via odin
Remember next time before you do anything like flashing a mod or trying out something different to always make a nandroid backup in cwm - this way if you get into a boot loop or want to revert what you have done you just have to restore your nandroid backup
anyway stock rom firmware is found on my thread below
http://forum.xda-developers.com/showthread.php?t=2568853
HellBoy.007 said:
When you post things like this in the development section don't expect any help.
Post in the right section.
Thread reported.
Click to expand...
Click to collapse
Yep sorry, my mistake consider me told off
marcussmith2626 said:
you can either format data in cwm or in stock recovery format data/reset
or if that doesnt sort the boot loop quickest way to solve it is just to flash stock rom via odin
Remember next time before you do anything like flashing a mod or trying out something different to always make a nandroid backup in cwm - this way if you get into a boot loop or want to revert what you have done you just have to restore your nandroid backup
anyway stock rom firmware is found on my thread below
http://forum.xda-developers.com/showthread.php?t=2568853
Click to expand...
Click to collapse
Hi ya mate,
I'm following your instructions but it's hanging on setup connection, i am using odin 3.07 in admin mode, not sure whats going on here, by the way there is no CWM installed at the mo it's reset to factory boot menu after trying someone elses method
jammychap said:
Hi ya mate,
I'm following your instructions but it's hanging on setup connection, i am using odin 3.07 in admin mode, not sure whats going on here, by the way there is no CWM installed at the mo it's reset to factory boot menu after trying someone elses method
Click to expand...
Click to collapse
follow the instructions fully on my thread
you need to install the usb drivers
you need to put your phone into download mode (vol down home button power button)
cwm is not required and not used to flash stock rom via odin - you must be in download mode NOT recovery mode
marcussmith2626 said:
follow the instructions fully on my thread
you need to install the usb drivers
you need to put your phone into download mode (vol down home button power button)
cwm is not required and not used to flash stock rom via odin - you must be in download mode NOT recovery mode
Click to expand...
Click to collapse
ok we got there in the end, i had 2 versions of odin in the same folder and it was locking it up some how, separated, rebooted windows and it worked thanks.
now back to the start, ive just rooted it again now need to add some recovery, what one would you guys recommend?
jammychap said:
ok we got there in the end, i had 2 versions of odin in the same folder and it was locking it up some how, separated, rebooted windows and it worked thanks.
now back to the start, ive just rooted it again now need to add some recovery, what one would you guys recommend?
Click to expand...
Click to collapse
if on stock kernel use a tempory cwm zip in stock recovery to get to cwm (need to do it each time you want to enter cwm
http://d-h.st/u2m
or flash any kernel that has a perminant cwm - your choice dont ask me to suggest
Ok thanks, I've got a kernel installed and a rom, got a couple of issues but I'll take that to the correct thread now
Sent from my GT-I9300 using Tapatalk
All sorted now, installed Hyperion 9 rom, got one happy lad