abnormal sw detected upgrade only | S8530 - Bada Software Development

Hello everyone!
I tried to flash my wave 2 and then an error appear: abnormal sw detected.
I flashed my wave many times in the past, this is the first time that I see this.
And in the multiloader:
Download Start Ch[0]
BootLoader 1703.9KB OK[0.9s]
ERR : Dbl Erase
HELP ME PLEASE..
The phone does not power on.. only boot logo (Samsung Wave II S8530)
:crying::crying::crying::crying:

try use the latest multiloader, and a correct firmware.
and also the latest drivers!
I've had that error on my S8500 because I was flashing a S8530 rom XD

coolriku said:
try use the latest multiloader, and a correct firmware.
and also the latest drivers!
I've had that error on my S8500 because I was flashing a S8530 rom XD
Click to expand...
Click to collapse
I flashed S8530 FW, and I'm using the all things you said.
sorry for bad english,
PLEASE!!! SOMEONE:crying::crying::crying::crying::crying:

??????????????

Multiloader 5.67
Why Boot change?
Bootloader flashing is dangerous and sometimes NOT mandatory...
Exact Firmware you tried?
bada 1 or 2 ?
Best Regards

adfree said:
Multiloader 5.67
Why Boot change?
Bootloader flashing is dangerous and sometimes NOT mandatory...
Exact Firmware you tried?
bada 1 or 2 ?
Best Regards
Click to expand...
Click to collapse
I tried with 5.67 and 5.65.
I tried bada 2

Which Firmware was before ?
Please write like XXLA1 DBT or similar...
Try WITHOUT Boot Change...
NO Boot Change...
Bootloader seems intact... otherwise no Logo...
Best Regards

adfree said:
Which Firmware was before ?
Please write like XXLA1 DBT or similar...
Try WITHOUT Boot Change...
NO Boot Change...
Bootloader seems intact... otherwise no Logo...
Best Regards
Click to expand...
Click to collapse
thank you, nut it does not work.
Download Start Ch[0]
ERR : FOTA Erase
Click to expand...
Click to collapse

http://forum.xda-developers.com/showpost.php?p=32812213&postcount=2
Try to flash ONLY the other files...
Bootloaders are OK... NO need to change at this time...
Good luck.
Best Regards

i faced this problrm before .. you're using an S8500 file check your CFW files

Related

PLEASE HELP ! Regarding 2.1 HK RUU

hello, I flashed RUU_Hero_hTC_Asia_HK_WWE_3.34.721.1_R_Radio_63.18.55.06P_6.35.15.14_release_signed on my taiwaan hero using goldcard and now i cannot flash my RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver. . . please help me! it says error - invalid update tool! WTF ... i have used that ruu many times but now it aint working. it strucks at updating signature.
and even the flash recovery software aint working !

[Q] please help me with my phone

Hello everybody, i need a help ...it is the firts time i would like to custom a little bit my phone and i was looking for a ROM.
The problem is that when i try to go on recovery mod appeare an error message wich tells :
Secure booting Error !
Cause:boot certification verify
What is this error ??
Has anybody had a problem like this one ?
And what can i do to install a ROM if the phone doesn't go on recovery mode ?
salvoman said:
Hello everybody, i need a help ...it is the firts time i would like to custom a little bit my phone and i was looking for a ROM.
The problem is that when i try to go on recovery mod appeare an error message wich tells :
Secure booting Error !
Cause:boot certification verify
What is this error ??
Has anybody had a problem like this one ?
And what can i do to install a ROM if the phone doesn't go on recovery mode ?
Click to expand...
Click to collapse
please specify which recovery are you using..
and i think that this problem has occured because you have installed cwm from rom manager .please follow this link http://forum.xda-developers.com/showthread.php?t=2486512 and read how to istall recovery ..
and this is only for L7 please specify your phone model too
thank you for your answering
ArjunrambZ said:
please specify which recovery are you using..
and i think that this problem has occured because you have installed cwm from rom manager .please follow this link http://forum.xda-developers.com/showthread.php?t=2486512 and read how to istall recovery ..
and this is only for L7 please specify your phone model too
Click to expand...
Click to collapse
my phone is lg p700 so the L7 , I have the rom stock from the official update at 4.1.2
Yes i tried to install it from rom manager is it wrong ?
now i will try to follow the instruction on the link you sent me and install a ROM ... Thank you so much
salvoman said:
my phone is lg p700 so the L7 , I have the rom stock from the official update at 4.1.2
Yes i tried to install it from rom manager is it wrong ?
now i will try to follow the instruction on the link you sent me and install a ROM ... Thank you so much
Click to expand...
Click to collapse
try the method specified..its sure to work
and ask if having any problem.

Country selection failed

Hi everyone
I'm a newbie and unfortunately made some mistakes and messed up my Vodafone smart tab iii 7 (Lenovo a3000) . First mistake i formatted whole flash with no backups. I flashed the rom a3000 w call fuse from this forum. Now it boots but gives me screen to select county. Bunch of red boxes. I selected each one but it just says "TIMED OUT" and reboots. I suppose its to do with imei but MTK droid tools can not set my imei and also does not read the baseband version. Any help or suggestions please. I'm out of options.
you must flash "fac" file to fix it
[email protected] said:
Hi everyone
I'm a newbie and unfortunately made some mistakes and messed up my Vodafone smart tab iii 7 (Lenovo a3000) . First mistake i formatted whole flash with no backups. I flashed the rom a3000 w call fuse from this forum. Now it boots but gives me screen to select county. Bunch of red boxes. I selected each one but it just says "TIMED OUT" and reboots. I suppose its to do with imei but MTK droid tools can not set my imei and also does not read the baseband version. Any help or suggestions please. I'm out of options.
Click to expand...
Click to collapse
All you Need is Flash FAC.img
Hesham Sleem said:
All you Need is Flash FAC.img
Click to expand...
Click to collapse
hi, i have the same issue, but i dont know the idea what "flash fac.img" is it? and how to do it ? I just googling, but i cant understand yet:crying:
Rhibian said:
hi, i have the same issue, but i dont know the idea what "flash fac.img" is it? and how to do it ? I just googling, but i cant understand yet:crying:
Click to expand...
Click to collapse
if you flash 4.2.2 you may find fac.IMG in package of firmware
if you flash my ROM 4.4.2 you don't need this img

mobile stuck after installing xpoze

Hello sir
...
When im installing xpose zip file using twrp after installation complete my devise stuck on samsung logo ....
Plz help me
My devise sm-g361
I was download corect files
But i dont no
How stuck my mobile
....
Sorry for bad english
Thank you
Abdul rahman razvi said:
Hello sir
...
When im installing xpose zip file using twrp after installation complete my devise stuck on samsung logo ....
Plz help me
My devise sm-g361
I was download corect files
But i dont no
How stuck my mobile
....
Sorry for bad english
Thank you
Click to expand...
Click to collapse
This is in the wrong section. It should be in the Questions & Answers section here:
http://forum.xda-developers.com/galaxy-core-prime/help
More info on installing Xposed properly here:
http://forum.xda-developers.com/showthread.php?p=67909185
You can fix boot be flashing Trapkernel from here:
http://forum.xda-developers.com/showthread.php?p=62859013
Thank you sir
...

Huawei p9 lite 2017 stuck at 'Your device is booting now...'

Hello,
Sorry for my english ;(
Please help me, my p9 lite 2017 is stuck on " your device is booting now ". I can't do anything. The recovery and the bootloader doesn't work at all. My bootloader Is unlocked. Please help me please
Maybe i can run system with sd card but how?
Help please
MrNicer said:
Hello,
Sorry for my english ;(
Please help me, my p9 lite 2017 is stuck on " your device is booting now ". I can't do anything. The recovery and the bootloader doesn't work at all. My bootloader Is unlocked. Please help me please
Maybe i can run system with sd card but how?
Help please
Click to expand...
Click to collapse
Hey dude, sorry for the question...
it's your device a PRAGUE or VENUS one (PRA-XXXXXXXXXXXX or VNS-XXXXXXXXXXX) ?
Dadditz said:
Hey dude, sorry for the question...
it's your device a PRAGUE or VENUS one (PRA-XXXXXXXXXXXX or VNS-XXXXXXXXXXX) ?
Click to expand...
Click to collapse
Thank you for answer
Its PRA-LX1C432B322
android 8.0.0 emui 8.0
MrNicer said:
Thank you for answer
Its pra-lx1 android 8.0.0 emui 8.0
Click to expand...
Click to collapse
Well i suggest to search in p8 lite 2017 thread,
it's a subthread in p8 lite main thread.
You should find your answers.
Sorry
edit: let it drain the battery completely.
When it will turn off keep vol+, then insert the charge cable and press power button
maybe will restart in recovery mode.
Reboot system..
Phone now is in eRecovery mode but i cant 'download latest version and recovery' by WI-FI
MrNicer said:
Phone now is in eRecovery mode but i cant 'download latest version and recovery' by WI-FI
Click to expand...
Click to collapse
Anyone can find stock rom for PRA-LX1C738B170
Please
MrNicer said:
Anyone can find stock rom for PRA-LX1C738B170
Please
Click to expand...
Click to collapse
Dude you can use Firmware Finder to download this rom.
Look at the appropriate thread before do somethings more slippery...
just my advice...
Good luck
Dadditz said:
Dude you can use Firmware Finder to download this rom.
Look at the appropriate thread before do somethings more slippery...
just my advice...
Good luck
Click to expand...
Click to collapse
Yes , I tried use Firmware Finder, but i cant get update
I tried Install with DNS and eRecovery but didnt work
And i tried download FullOTA-MF but the downloading stop at 11/100 %
Edit: OK i downloaded the rom
I tried install with dload but on 5% "Installation failed"

Categories

Resources