Database Users

[GUIDE] Perka´s And flip360´s Clean Install Guide And Package

Perka´s And flip360´s Clean Install Guide And Package.
Warning!
If you do not follow the guide exactly you might brick your phone!
This guide is only for Samsung Galaxy S GT-I9000
If you do not know what 3 button combo or recovery is, read this please.
If you have Captivate Here you have a guide.
We are not responsible for bricking anybody’s phone!
If it happens we will try to help you, but remember we are doing this for free!
You do not have to do all Sections, please read what each Section is for.
IMPORTANT! – You need to read the guide before doing it, and use the files provided.
​
Section A If you have 2.1, 2.2, 2.2.1
Section B is for flashing stock 2.1, to get a fresh clean install.
Section C is for flashing our update.zip from 2:e recovery (It is a renamed Kitchen Rom) Log here.
Section D Another way to get to Kitchen Rom from stock 2.1 with 2e recovery, does not work with Stock Froyo 2.2 or 2.2.1.
Section E is a guide to Magical Rom Kitchen.
Section F is a How to CWM update.zip guide, (to get CWM, only works in 2e recovery 2.1 Eclair)
​
Before you begin with the flashing process, make sure that you:
Samsung drivers installed on your computer.
Have backups.(When you restore your backups, DO NOT restore system settings.)
Do not have any lag fix applied.(If you are going to flash stock with pit, no need to disable lag fix)
Phone battery is fully charged.
You don´t have Kies running.
We strongly urge you to read through the whole guide first before attempting any of this,
and sticking to our reference, here is the files that you will need before attempting to flash your Samsung Galaxy S GT-I9000.
​
Download Section.
Odin v 1.3
Samsung USB Drivers.
Driver x64
Driver x86
For Section A
Speedmod Kernel K13b
For Section B
GT-I9000_I9000XWJM8_I9000XXJM4_CODE-MODEM_Odin_Csc_Pit.512.zip
or
GT-I9000_I9000XWJM9_I9000XXJM4_CODE-MODEM_Odin_Csc_Pit.512.zip
For Section C
The renamed Kitchen Rom (update.zip) Log file This is used if you get stuck on GT screen.
For Section D
Z4Root
Sgs Kernel Flasher
Speedmod Kernel choose the CWM.
Qr codes in Post 2
For Section E
Cook your favourite Kitchen Rom in Magical ROM Kitchen
For Section F
ClockWorkMode update.zip
​
Preparations
To begin with, download and extract all these files mentioned above to a convenient location, preferably on your desktop. Once you have all the files in place, launch Odin as administrator. On your device end, make sure that you have disabled any lag fix, if applied earlier.
Ensure that the drivers for your SGS are installed on your computer.
If you have Kies already installed on your machine, the drivers are already in place. If Kies is running shut it down.
Power off your phone.
Put your Galaxy S in download mode by pressing and holding the Volume Down + Home + Power keys at the same time.
You will see a yellow symbol and the words ‘Downloading’ once the phone has gone into download mode. That’s it, we’re ready to begin the flashing sequence.
​
Section A
Before flashing the Speedmod Kernel, put your Kitchen Rom on your internal sd card.
Flashing a Speedmod Kernel Guide here.
When flashing on 2.1, you get stuck on GT-screen, dont worry its normal, just pull battery and enter recovery.
Now go to Section E
​
Section B
Flashing stock firmware
Make sure you don´t have Kies running, and your phone is off, do not connect it now.
1.Start Odin
2.In PIT, load the 512.PIT file.
3.For PDA, select the CODE file.
4.For PHONE, select the MODEM file.
5.For CSC select the CSC file.
6.Make sure that the Re-partition box is checked.
7.Put your phone in download mode. (Volume down + power button + home button )
8.Connect your phone to your PC via the USB cable. It will install the drivers, or if they are already installed, you will see ‘Added’ in Odin’s message box . A COM port will also become visible.
9.Again make sure that all the selections in Odin’s interface are correct. Press the Start button when verified.
The flashing sequence will begin, and you will see several messages in Odin. Make sure that the phone does not disconnect during this time, as it may brick your device permanently. Once the flashing sequence has completed, Odin will give a ‘Completed’ message in the Message box, and a green PASS will appear on top.
Your device will automatically reboot at this point.
Congratulations! You have successfully completed stage one of the process, and now you’re running the XWJM8 or JM9 2.1 Éclair firmware.
Section A is useful if you just want to revert back to factory stock 2.1 (warranty, repairs, etc.)
Now you can do Section A ,D or F
​
Section C
Flashing the update.zip, this is used if you have problems installing your Kitchen Rom
Copy the update.zip (it is a renamed Kitchen Rom Log) to your Internal Sd card.
Shut off the phone and reboot to recovery (Volume UP + Home + Power) and do a FACTORY RESET.
Then choose Install update.zip from the recovery, let it install and reboot. When the phone has booted, shut the phone off and enter recovery (Volume UP + Home + Power) and then choose Install update.zip from the recovery, let it install and reboot.
It´s not a typo you need to do it twice.
All done! Now you have a basic Kitchen Rom containing CWM and all you need to flash a custom ROM.
If you want to stay with this Rom, you can enter the Magical ROM Kitchen and make a update.zip with the apps you want to add, and flash it in cwm. If you want to uninstall something you can do it with Titanium.
Now you can go to Section E
​
Section D
Another way to get to Kitchen Rom from stock 2.1 with 2e recovery, does not work with Stock Froyo 2.2 or 2.2.1.
When you have the apps and the Kernel needed for this Section,
1.Install the apps.
2.Cook your Kitchen Rom and put it on your internal sd card. (see section E how to do that)
3.If you did not download the kernel with your phone,(qr codes in post 2) put it on your internal sd card.
4.Root with Z4Root.
5.Flash the Speedmod Kernel with Sgs Kernel Flasher (only v1.5.9 or newer)(Atm you will get stuck on GT screen due to mismatch between kernel/firmware versions if you try normal booting)
6.Enter recovery
7.Factory reset
8.Install zip from sd card
9.Choose zip from sd card
10.Install the Kitchen Rom
11.Reboot
​
Section E
Flashing a Kitchen Rom if/when you have clockworkmode
Here you have a app guide made by marcedli Xda
And here you have a nice Kitchen walk-trough with screens: Link.
This is the steps you need to do.
1.Place Kitchen Rom on internal sd card
2.Enter recovery
3.Factory reset (if you install new base Rom OR the previous Rom had a voodoo kernel AND you want to wipe)
4.Install zip from sd card
5.Choose zip from sd card
6.Install the Kitchen Rom
7.Reboot
​
Section F
How to get CWM with CWM update.zip (only works in 2e recovery 2.1 Eclair)
1.Place your Kitchen Rom on your internal sd card, that you generated in the Kitchen
2.Place the CWM update.zip on your internal sd card that you downloaded from download Section
3.Power down your phone and enter recovery (Volume up + power button + home button )
4.Choose apply sdcard:update.zip, now you will end up in recovery again, so choose apply sdcard:update.zip and you will have CWM.
5. Now go to Section E step nr 3.
​
If you still have any questions please log in to Kitchen`s Irc support channel. (in irc type !help)
Webchat!
​
Please rate or comment.
​
This guide was made and tested by,
flip360 Xda
Perka Xda
Beerfund
​​

Links and QR codes.
Do you need a file? Perka´s File Stash!
Black Android Theme by Pele78 (imo the best out there!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you need help with modem, csc, and other stuff, please go to Doc´s Irc channel and type !help and you will find what you are looking for, Click this text.
Guide in PDF
Perka´s File Stash
Adobe Reader
Z4Root
Sgs Kernel Flasher
Speedmod Kernel
Credit Goes To The Doc Team!
Do you want free dropbox cloud space? Use this link to sign up and you get 2gig + 250mb space for free (and I get 250mb) Thx.

gday.. just to clarify...does this suggest therefore to flash back to jm8 2.1 prior to flashing to a Doc Rom??
i have asked this in another post, but say for example you are already running another ROM that comes with all the bells & whistles (eg cwm, optional lagfix, root, sgs tools themes etc)..
would the user need to go back to jm8?
cheers

skuzy said:
gday.. just to clarify...does this suggest therefore to flash back to jm8 2.1 prior to flashing to a Doc Rom??
i have asked this in another post, but say for example you are already running another ROM that comes with all the bells & whistles (eg cwm, optional lagfix, root, sgs tools themes etc)..
would the user need to go back to jm8?
cheers
Click to expand...
Click to collapse
If you have problems flashing, use this guide, if you already have cwm recovery and can flash custom roms you dont need to do this guide.

thanks for confirming.!

Can this be used to flash all modded CWM ROMs? I think so. You can check & modify the topic accordingly.

ragin said:
Can this be used to flash all modded CWM ROMs? I think so. You can check & modify the topic accordingly.
Click to expand...
Click to collapse
i think so. We will test this out and give feedback

flip360 said:
i think so. We will test this out and give feedback
Click to expand...
Click to collapse
You mention 502 pit. Did you mean 512 or 503?

ragin said:
You mention 502 pit. Did you mean 512 or 503?
Click to expand...
Click to collapse
yes 512pit file. sorry typo

Huh? Isn't Doc's rom a CWM Rom? You can't flash those as a update.zip can you?

snapper.fishes said:
Huh? Isn't Doc's rom a CWM Rom? You can't flash those as a update.zip can you?
Click to expand...
Click to collapse
Yes Doc`s rom is coupled with CWM yes, but stock 2.1 also. try it

There´s an update coming to you soon from me and flip360
Teaser
http://www.swedroid.se/forum/showthread.php?p=428217#post428217

Updated enjoy.

Sorry, but to quote DocRambone's words:
"Wrong Section to post".
Edit: Thread reported.

Nice guide, thanks!
Is it also valid if you want to upgrade from an older Froyo rom like Doc 6.0 ?
If you start directly from stage 2 beeing on a stock rom, you have recovery 3e which won't let you flash unsigned packages (like the renamed DocRom "update.zip".
Or as I missing something ?

-Loom- said:
Nice guide, thanks!
Is it also valid if you want to upgrade from an older 2.1 rom like Doc 6.0 ?
In Docs own installation guide he stated to install a clean JP9 base before, do the usual CWM install through update.zip etc ..
And if you start directly from stage 2 beeing on a stock rom, you have recovery 3e which won't let you flash unsigned packages (like the renamed DocRom "update.zip".
Or as I missing something ?
Click to expand...
Click to collapse
If you are on a Doc rom do stage 3.
2.1 has 2:e recovery so it can flash unsigned zips.
Does not work if you have 3e recovery.

Doc advised to install a clean JM9 base rom before upgrading to a romkitchen rom.
But in stage 3 you wrote to just install the kitchen rom from CWM. Regardless what DocRom was in use before ?

-Loom- said:
Doc advised to install a clean JM9 base rom before upgrading to a romkitchen rom.
But in stage 3 you wrote to just install the kitchen rom from CWM. Regardless what DocRom was in use before ?
Click to expand...
Click to collapse
yes my good man

flip360 said:
[FONT=Book Antiqua, serif]For Stage 2[/FONT]
[FONT=Book Antiqua, serif]The renamed Doc Rom [/FONT][FONT=Book Antiqua, serif](update.zip) [/FONT][FONT=Book Antiqua, serif]Log file[/FONT]
[FONT=Book Antiqua, serif]Samsung USB Drivers.[/FONT]
[FONT=Book Antiqua, serif]Driver x64[/FONT]
[FONT=Book Antiqua, serif]Driver x86[/FONT]
Click to expand...
Click to collapse
Got these drivers package ... But which one is used for my SGS on W7 x64 please ? It doesn't find it by istself ?

Wendigogo said:
Got these drivers package ... But which one is used for my SGS on W7 x64 please ? It doesn't find it by istself ?
Click to expand...
Click to collapse
the x64 one, i think it does throught win driver management.

[Q] (Q) how to get superuser work in creeds rom with merruk kernel

is there anyone knows how to get superuser work in creeds fusion with merruk kernel?
before i flashed merruk kernel, the superuser work but after i flashed merruk kernel, the superuser didn't work anymore.
I don't want to flash back to get the stock kernel because i want to use merruk kernel. if you have a trick about this problem, please share here

aris_umar said:
is there anyone knows how to get superuser work in creeds fusion with merruk kernel?
before i flashed merruk kernel, the superuser work but after i flashed merruk kernel, the superuser didn't work anymore.
I don't want to flash back to get the stock kernel because i want to use merruk kernel. if you have a trick about this problem, please share here
Click to expand...
Click to collapse
have you updated the binary already?? it worked for me
Sent from my super Y via XDA

I'd suggest not using Merruk until the next update. You'll probably end up bricking your phone. But to answer your question, flash a rooting update.zip. If that doesnt work, first flash the unroot.zip and update.zip later. I did get SuperUser to work but the kernel is just too buggy.

aris_umar said:
is there anyone knows how to get superuser work in creeds fusion with merruk kernel?
before i flashed merruk kernel, the superuser work but after i flashed merruk kernel, the superuser didn't work anymore.
I don't want to flash back to get the stock kernel because i want to use merruk kernel. if you have a trick about this problem, please share here
Click to expand...
Click to collapse
before flashing merruks kernel you need to flash update.zip (root) first on your device and then you can now continue flashing merruks kernel

I just have done this u can install merruk kernel ur data will get automaticaly wiped and u will b like freshly instqlled creeds 3.2 now just connect to internet n download superuser from market it will work and old supersu will be removed aUtomatiacallt....
Sent from my GT-S5360 using XDA

klaasscho98 said:
have you updated the binary already?? it worked for me
Sent from my super Y via XDA
Click to expand...
Click to collapse
how you update the superuser?
when it ask to update and I pressed continue, it's always show 'instalation failed'
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Raol Emostar said:
I'd suggest not using Merruk until the next update. You'll probably end up bricking your phone. But to answer your question, flash a rooting update.zip. If that doesnt work, first flash the unroot.zip and update.zip later. I did get SuperUser to work but the kernel is just too buggy.
Click to expand...
Click to collapse
it's not working

i think its all in the sequence of how you flash the merruk kernel.
its better if you flash the kernel as per direction/method on merruks kernel thread first then install the rom.
it is how i do with my phone and superuser works everytime.

aris_umar said:
how you update the superuser?
when it ask to update and I pressed continue, it's always show 'instalation failed'
Click to expand...
Click to collapse
Bro no need to update just search for supeuser in markrt and u will b a le to dow.load frsh copy
Sent from my GT-S5360 using XDA

First you need to apply the Merruk Kernel over the stock rom.. Mount the system and flash creed v3.2 / any other rom.. SuperUser won't be a problem then.. You need to follow exactly how the post describes and I'm sure it will work...
Raol Emostar said:
I'd suggest not using Merruk until the next update. You'll probably end up bricking your phone. But to answer your question, flash a rooting update.zip. If that doesnt work, first flash the unroot.zip and update.zip later. I did get SuperUser to work but the kernel is just too buggy.
Click to expand...
Click to collapse
Well the pre 2.0 merruk Kernel is just awesome.. Need very few minor bugs.. It has a bug that you need to mount system always when you flash a new zip and particularly any rom.. This makes people confuse and blame the kernel for its functionality.. The kernel is just perfect for under volting and under clocking.. This phone is not intended for over clocking imo.. The battery backup will increase tremendously with uv..
Sent from my GT-S5360 using xda premium

This thread has been cleaned, edited and reopened.
The OP opened this thread to be helped. He shouldn't be penalized because of the nonsense going on.
Stop the name-calling and bickering and help this user. If you have nothing to contribute don't post.
If anyone else continues this arguing, you will be dealt with accordingly.

soraci said:
before flashing merruks kernel you need to flash update.zip (root) first on your device and then you can now continue flashing merruks kernel
Click to expand...
Click to collapse
I've tried that, the message told me it was aborted.

Steps to get your root access back
Use instructions below. I had faced similar issue yesterday and this worked like a charm.
Credits to the Dev's who made the Superuser.apk for us.
Requirements:
1. Download the Superuser.apk from attachment below.
2. Download adb.zip (attached) and extract to a folder
Directions:
1. Open cmd change directory to the adb extracted folder
2. Uninstall your current version of Superuser with:
adb remount /system
adb shell rm -f /system/app/Superuser.apk (if this fails try below)
adb shell rm /system/app/Superuser.apk
3. Install new one using adb
adb install Superuser.apk
Or
adb push Superuser.apk /system/app/Superuser.apk

Please Help
Im Using Galaxy Y Creed Rom 3.5
it works well
but after i install merruk kernel #206
When i switch on my phone. The Samsung Galaxy Y Logo comes with
The sounds of CREED. and then when CREED logo appears it has no sounds and very lag.
My busybox 1.18.2 becomes 1.17.2
i tried to install again 1.18.2 but it works. but whenever i run v6 supercharger it says 1.17.2 found!
and my phone boot's automatically.
i always need to disable/enabe the Supersu so that it will work.
i need help badly T_T

Look for stickied odin flashable firmware thread in dev. Section.
Read second and third posts
(instructions ) carefully and you will get your sgy back to normal
----------------------------------------------
EGO = ( 1 / KNOWLEDGE ).

Help me please
Fawkes... said:
Look for stickied odin flashable firmware thread in dev. Section.
Read second and third posts
(instructions ) carefully and you will get your sgy back to normal
----------------------------------------------
EGO = ( 1 / KNOWLEDGE ).
Click to expand...
Click to collapse
im totally noob here in XDA T_T
can u give me the link please?
i want to revive my phone back to normal

http://forum.xda-developers.com/showthread.php?t=1465800
----------------------------------------------
EGO = ( 1 / KNOWLEDGE ).

How to switch ROM with maintaining Root + data

Here is guide for ROM switching and flashing/updating ROM with keeping Root & Data management.
ROM switching :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There are guide already available on stock ROM thread, but here i am showing how to switch ROM and How to update ROM in day to day with keeping Root and data intact. Hope this can be great help for newbies.
ROM Switching
There are lots of inquiries around regarding switching ROM. Here I have attached graphical representation, which can be helpful to decide your way to go.
Here I have divided guide in 4 parts
A.Backup data
B.Flashing Pre rooted ROM
C.Switch ROM using Mobile Odin Pro
D.Restore Data
A.Backup Data :
If you have non rooted device then you have limited option for this.Mybackup Pro also have some option for non root user too.
If you have rooted device then it will be at great help for you. Commonly used application is Titanium Backup and Mybackup Pro
In sort Titanium is feature rich, Mybackup is easy to use. I will discuss TB here in detail
What to backup first time?
when using first time, this option is good - 'Backup all user all + syst data' This will takes backup of all System data like contacts,SMS,call logs etc as well it includes all the applications you have installed along with data e.g. levels of game, app requires credential (you have to select app+data option while backup) - See image below
After this you can ad schedule for day to day auto backup. see image below i have scheduled it to take backup of system data once in a wk while any application i will install, that will be backup 5 days a wk. But this is highly configurable and you can set it according your needs.
Now lets starts with switching to Stock GB ROM from any ROM you have installed.
B.Flashing Pre rooted ROM
Starting from Any ROM you are having, if you want to move to stock rooted GB ROM then easiest way is to Flash pre rooted ROM
How to ?
1.Download This ROM
2.Extract file and Flash using PC odin.
File and tab selection is shown in image below PS :File name in PDA tab will be different,here is demonstration purpose)
If you can't see image above, click This
After successfull flashing device will be rebooted, and you may experience Force closed OR stuck at samsung logo. This is normal perticularly you are switching from custom/ICS ROM
Reboot device in recovery and wipe cache and wipe data.
You will have stock GB ROM + Root + CWM at end.
From here you can flash any custom ROMs require base ROM GB. using recovery.
OK Now next step
Switching from Rooted stock GB ROM / Rooted ICS ROM to another Stock GB/Stock ICS ROM with keeping Root intact.
Here you needs Mobile Odin Pro.
How to :
C.Switching ROM using Mobile Odin Pro
1.Download desired stock ROM from here and extract to .tar
2.Download custom kernel in .tar (odin version) according to your selected ROM. Here is kernel repository by chasmodo worth to look.
3.Copy above ROM and kernel files to Int SD card(recommend internal, but you can use Ext SD too)
4.Install Mobile Odin Pro, and open. (if you opening it first time, it will ask to doenload flasher file of abt 8MB)
PS:Here below image is diagramatic representation of flashung LRG ROM + Notecore kernel
5. select 'Open file' (see image)
6.Point to ROM file which you have copied to SD card
7.It will popup and all field will be filled automatically
8.Select Kernel tab and point to custom kernel file you have copied to SD card (see image)
9.tick 'Enable ever root' and 'Inject superuser(super SU) -(see image)
10. Flash firmware
Device will reboot in recovery and flash ROM, and of successful flashing it will reboot normally
11.Reboot in recovery
Wipe cache, wipe delvic cache and wipe data
Now your device is updated to your desired ROM + Root + Custom Kernel with advanced recovery.
D.Restore data :
-Add google a/c to newly flashed device and download Titanium backup
-Avoid system junk to restore(red colored), you can restore call logs/SMS
-select this option to restore 'Restore missing app + data'
-In next screen of list of missing application, look for any application you dont need, as well untick any application listed, which was a part of system application of previous ROM
-It will finish restoring of you app with data
Reboot after finish
And you are ready to play with device with New ROM.
Hope this will help newbies ........................
GusLuck!
and Happy Flashing.

reserved......

Resevred 2

Many thanks! The graphical presentation is excellent!

pharaohc said:
Many thanks! The graphical presentation is excellent!
Click to expand...
Click to collapse
Thnx, but can you edit your post and remove full quoting? it is just waste of space dear.

Dear Ketan,
Now I have to learn this from you...
You are really marvelous man with great explanatory skills....
Thanks for this... I was thinking to learn such only...
Sent from my GT-N7000 using xda app-developers app

Pretty helpful and this can be used mate for rooted JB as well right
Sent from my GT-N7000

Ya, jb is not stil official so i used term any custom rom
Sent from my GT-N7000 using xda premium

Hi Dr Ketan
The guide is great. I have a question. I'm on a stock rooted 4.0.3 and would like to upgrade to 4.0.4. How can I do it using mobile Odin pro and keeping my data intact? Can I use the non wipe ROM in your other thread and then check on the everroot and inject superuser option?

kevinhwc said:
Hi Dr Ketan
The guide is great. I have a question. I'm on a stock rooted 4.0.3 and would like to upgrade to 4.0.4. How can I do it using mobile Odin pro and keeping my data intact? Can I use the non wipe ROM in your other thread and then check on the everroot and inject superuser option?
Click to expand...
Click to collapse
Just follow STEP C in above guide.
All ICS ROM are non wipe. yes keep ever root and super user inject enable.
Just wipe cache and delvec cahe post flash to keep ur data intact.

very helpful guide .. i hit thanx every time i see ur name on a posts
the best thing is not loosing game levels hahahaha
:good:

osama_m2s said:
i hit thanx every time i see ur name on a posts
:good:
Click to expand...
Click to collapse
This time i did :good:

Thanks again Dr.Ketan .. Liked the full pictorial representation .. i always lost my data while moving between ROM's .. but was happy with what i was getting from Google (contacts and old apps list) ..
Now that this guide is there I will prepare myself with better backups..
Thanks again
---------- Post added at 07:51 PM ---------- Previous post was at 07:49 PM ----------
Is there anyway to do the full process using only PC Odin and eliminating the need of Mobile Odin Pro..
I personally dont like to spend money on the app ..

PC odin will erase root. you will have to flash safe kernel with PC odin, that will raise counter and you need to reset it using Triangle away.

Okay .. got it .. Will give it a thought .. Thanks again

this guide is great,
the best way to flash ICS custom Rom is back to Pre rooted Rom.
Ps: Dr, I can't load image on step B

Thanks Dr Ketan.
Another question. For custom kernal, any ICS kernal in the chasmodo thread will do?
---------- Post added at 02:33 AM ---------- Previous post was at 02:23 AM ----------
Another noob question...
Why do I need a custom Kernal? The stock ROM file that was downloaded already have a kernal inside right? If needed, I have chosen the official CM9 kernal "Kernel_CM9_20120806_CWM_Flashable.zip". Is that ok? i've repack this to .tar using filzip software.
Also, can I select the inject Mobile ODIN as well when flashing?

kenshinjar said:
this guide is great,
the best way to flash ICS custom Rom is back to Pre rooted Rom.
Ps: Dr, I can't load image on step B
Click to expand...
Click to collapse
Fixed
kevinhwc said:
Thanks Dr Ketan.
Another question. For custom kernal, any ICS kernal in the chasmodo thread will do?
---------- Post added at 02:33 AM ---------- Previous post was at 02:23 AM ----------
Another noob question...
Why do I need a custom Kernal? The stock ROM file that was downloaded already have a kernal inside right? If needed, I have chosen the official CM9 kernal "Kernel_CM9_20120806_CWM_Flashable.zip". Is that ok? i've repack this to .tar using filzip software.
Also, can I select the inject Mobile ODIN as well when flashing?
Click to expand...
Click to collapse
You hav to go for TW based ICS kernel
CM9 won't work
as i said mobile odin need kernel in .tar file. zip format won't work.

Hi Dr.
Can I not choose a kernal and just flast the stock rom with everroot, inject superuser and inject mobile odin selected?
---------- Post added at 06:54 AM ---------- Previous post was at 06:49 AM ----------
If I must choose a kernal, can I use Notecore 12?
I'll be upgrading to the ROM below. Will the kernal from Notecore work?
N7000DXLR2---4.0.4/12.07.09-N7000OLBLR1---Download--- Singapore (StarHub)

kevinhwc said:
Hi Dr.
Can I not choose a kernal and just flast the stock rom with everroot, inject superuser and inject mobile odin selected?
---------- Post added at 06:54 AM ---------- Previous post was at 06:49 AM ----------
If I must choose a kernal, can I use Notecore 12?
I'll be upgrading to the ROM below. Will the kernal from Notecore work?
N7000DXLR2---4.0.4/12.07.09-N7000OLBLR1---Download--- Singapore (StarHub)
Click to expand...
Click to collapse
If you don't choose kernel, then your device will be rooted but won't have safe kernel. So you you have to not to wipe anything b'coz your kernel will not have emmc brick bug driver disabled. In short i don't recommend it.
yes notecore kernel .tar version will work

[Tutorial] How to flash Jelly Bean on Samsung Korean Galaxy S / SHW-M110S

How to upgrade from Gingerbread WF07 to a Jelly Bean ROM on the SHW M110S
Basic Considerations that will help you to restore your current ROM ​
First make a Backup of your current ROM, such that you can return to it, IF the Jelly Bean ROM is not what you expected it to be. How?
a) When Using a tegrak Kernel on the M110S , you can get this done on the bootup screen , by entering it and making a system and also a dbdata/data backup of your phone, which can be restored by using the terak kernel again IF WF07 ROM is what suits you best.
Your backup will be placed in the Tegrak Folder in the Internal SD card...so save this to your PC or external SD card for safe keeping.
b) When using a Speedmod kernel, you need to enter recovery first to make a nandroid backup of your system and data
Your Backup will be placed in the ClockWorkMod Folder of your SD card. Which can be restored by using the speedMod kernel again IF WF07 ROM is what you desire.
None of these Kernels can be used for Jelly Bean ROM, and you need to use a Version 5 CWM (ClockWorkMOD) recovery, to flash the Jelly Bean or ICS ROM direct from your SD card...as such the first thing you need to do is change the Recovery on your M110S to a version 5 ClockWorkMOD.
Second Backup your efs folder, why? read this. How? read this
What you should know about this Jelly Bean ROM on the M110S​
a) It may take from 3 to five minutes for the ROM you flashed to stabilze, so try to be patient or you will have a non responsive phone in your hands, even when the ROM is stable.
b) When ever certain functions do not seem to work initially...like unable to connect to your WIFI, network etc just reboot phone.
c) Poor response may be due to settings or permissions that need to be fixed, which can be done on your settings menu or in the advanced menu of your recovery ...so you must have ample knowledge of the numerous features the Jelly Bean settings menu has.
The Jelly Bean ROM's for Korean Galaxy S (SHW M110S) that have little to NO issues at the moment are​
Common Issue in Jelly Bean being having NO Ringtone only vibration
Typhoonoid aokp verion 2.1.2 or here
Typhoonoid paranoid version 1.1
CM 10 All Fixed
Provisionmod All Fixed
JBean 4.2 under construction here only for testers to verify bugs
Reminder, What you do with your Phone is your own responsibility, so do it at your own risk. Always ensure your Battery is fully Charged prior to flashing any phone​
This is the basic procedure for Jelly Bean upgrade​​
1) Download the CWM Recovery.tar ( Attached below), the ROM's come in .zip format ( it can be as many as you wish, for you to test them out, one after the other) and Place them in a Folder (create and name it as you wish) on your SD Card Also Download the Gapps.zip (Google apps) File that need to be flashed after flashing the ROM. ( So it will always be two packages to flash, in order to get your phone functioning)
Download:-
a) CWM Version 5.0 Recovery attached below
b) Rom of your choosing from here or here or here Zip file includes ROM & Kernel (do not unzip)
c) Gapps Here (do not unzip)
d) Ringtone Fix here (Tested not working on M110S)
e) New 4.1.2 Kernel use Odin to flash when using older ROM
2) Flash the version 5 and up CWM recovery on your Phone, How?
Put your phone into download mode, Fireup Odin3 on your PC, connect to Odin3 with USB cable, select CWM Ver.5.0 recovery.tar under PDA and Flash it. Ensure you do not reboot the phone by "UNTICK" reboot in Odin3 such that it will not power ON after Flashing, in case it does power ON, just pull out Battery , press power button for 30 seconds and insert battery again
3) After flashing recovery with Odin, You can enter " Recovery Mode" by press VolumedownKey+PowerKey+HomeKey. You do this every-time you want to switch to a JellyBean or iCS ROM or to utilize the many features this recovery has, like Backup/restore/fix permissions and mostly to do the full wipes (NEEDED to be done every time you want to SWITCH ROMS) etc
4) Once in CWM Recovery you do the Full wipes (use your volume keys to move up or down in the recovery menu to select and the power key to execute that command).
The undermentioned wipes need to be done and will constitute a FULL Wipe of your Phone but your SD card will not be fully formatted as such your Images and other non system files will remain as is.
a) Wipe data / Factory reset
b) Wipe cache
c) Enter advanced and wipe dalvic Cache
Once the full wipes are done,
5) You now choose the ROM you placed in your SD card by selecting "Install zip from sdcard" which will lead you to "choose zip from sdcard", which will take you to all the folders you have on your SD Card..scroll down to where you placed the downloaded files and select it
Once selected the ROM will be Flashed on to your phone, so wait till it says "install completed" Now you do the same selection process again (Step 5) to select the Gapps file and wait till it says "Install completed"
6) That's it, Now select "Reboot system Now".
Now the ROM has been installed on your phone, so let it boot up and you can repeat this procedure to switch again and again till you have the best ROM of your choosing.
Solutions to solve problems, if any
In the event that it fails to boot-up or you placed a wrong ROM that caused a boot loop or any other problem, just look in My Android Solutions , IF you cannot enter Recovery mode to flash another ROM.
or ​
You can also use Odin3 to Flash a Gingerbread ROM in Download mode and use your First backup ( made by Tegrak or speedMod) to return your phone to its original state.
Ringtone Codec from this post unfortunately it seems to fail in fixing the Ringtone issue but no harm done in installing this codec
atrix4g18 said:
This is the fix for Audio/Sound on any Jelly Bean ROM on any device.
JB needs this file "/system/etc/media_codecs.xml"
This file is missing, but simply copying the file there using Root Explorer or any file explorer with root access works. This does not require a permissions change. The file is not there originally so you won't be overwriting anything. I did this fix on my Atrix 4G and it worked perfectly. It is universal and will work on any Jelly Bean ROM on any device with this issue.
Here is a link to the file:
http://forum.xda-developers.com/attachment.php?attachmentid=1207669&d=1342668760
Steps:
- Extract "media_codecs.xml"
- Copy it to /system/etc/
- Make sure to mount system as R/W (read/write) before pasting the file
- Reboot
- Sound Fixed!
Click to expand...
Click to collapse
Final Advice
IF you like the ROM you had just installed and after doing all the tweaks and adjustments you would like to try another ROM, just get back into your CWM recovery , scroll down to "backup and restore" and back it up. Such that you can restore it, if your next selection is below expectations. or you wish to tweak it further at some other time. You can have many ROM's backed up and restored whenever you like...just remember on what date you backed it up.
You , YES! you are an " Android ".
You Must watch this documentary concerning your privacy Terms & Conditions we agree to
If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

Screen Shots of Typhoonoid aokp

Screen Shots of Paranoid

Typhoonoid by ODIN? Tegrek after Typhoonoid?
oh my god, your post is amazing. thank you thank you!
Question:
your post suggests using CWM Version 5.0 to do the ROM flashing. can i use just ODIN to flash Typhoonoid? or do i have to use CWM?
also, i believe that Tegrek kernel only supports stock ROM on the M110S, which is gingerbread. after flashing Typhoonoid, is it possible to flash Tegrek kernel again? can Tegrek lagfix be applied to Typhoonoid?

md11980 said:
oh my god, your post is amazing. thank you thank you!
Question:
your post suggests using CWM Version 5.0 to do the ROM flashing. can i use just ODIN to flash Typhoonoid? or do i have to use CWM?
also, i believe that Tegrek kernel only supports stock ROM on the M110S, which is gingerbread. after flashing Typhoonoid, is it possible to flash Tegrek kernel again? can Tegrek lagfix be applied to Typhoonoid?
Click to expand...
Click to collapse
Nope, you MUST use the Version 5 CWM recovery to flash ICS or Jellybean ROM's and Nope you cannot use tegrak anymore, and lag fix (sort of ) can be done with seeder app already included in the ROM

soft bricked
xsenman said:
Screen Shots of Paranoid
Click to expand...
Click to collapse
My phone turned to Upgrade Boot Logo after failed flashing of CWM 5.0 in my phone, is there a solution for this?

asukaragnaboy said:
My phone turned to Upgrade Boot Logo after failed flashing of CWM 5.0 in my phone, is there a solution for this?
Click to expand...
Click to collapse
means still in download mode and needs a full flash of ROM or Kernel or recovery you had earlier attempted to flash
upgrade screenshot http://forum.xda-developers.com/attachment.php?attachmentid=2147778&d=1374970741

On provisionmod ram swap is not working is there any cm 10 with swap support
Please can i get lidroid rat9 wc13 screenshots.
Sent from my GT-I9070 using xda app-developers app

shaikhsumair99 said:
On provisionmod ram swap is not working is there any cm 10 with swap support
Please can i get lidroid rat9 wc13 screenshots.
Click to expand...
Click to collapse
Not too sure, the others can achieve swap support, but give it a try, it pretty easy to change ROMS and test out, which can do what lidroid screen shots may be on their website here http://bbs.lidroid.com/forum.php?mod=viewthread&tid=110092&highlight=lidroid+wc13

http://main.develoid.com:82/samsung/Galaxy/Galaxy S/[Fixed] [GALAXY S] Typhoonoid Aokp Ver. 4.1.zip
Please tell me this rom is for m110s because in all roms its written galaxy s no model no it's quite confusing.
Sent from my GT-I9070 using xda app-developers app

shaikhsumair99 said:
http://main.develoid.com:82/samsung/Galaxy/Galaxy S/[Fixed] [GALAXY S] Typhoonoid Aokp Ver. 4.1.zip
Please tell me this rom is for m110s because in all roms its written galaxy s no model no it's quite confusing.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
yup, it works, seems there was a ver 5 too..but ver 2 was much smoother, anyways you should test it out, since my trials where way too short and incomplete

xsenman said:
yup, it works, seems there was a ver 5 too..but ver 2 was much smoother, anyways you should test it out, since my trials where way too short and incomplete
Click to expand...
Click to collapse
Sorry for asking again but i want a cm 7.2
http://main.develoid.com:82/samsung/Galaxy/Galaxy S/[Fixed] [GALAXY S] Typhoonoid Aokp Ver. 4.1.zip
Is this cm 7.2 is this rom has bugs
Please tell the bugs.
Thanks for helping bro.
Sent from my GT-I9070 using xda app-developers app

shaikhsumair99 said:
Is this cm 7.2 is this rom has bugs
Click to expand...
Click to collapse
NO. its ver 4.1, meaning Jelly Bean, CM 7.2 is gingerbread/ICS combo, try looking in the links given in OP, you need to go into their parent directory and it will clearly state CM 7.2. CM 9 would be ICS , CM 10 would be Jelly Bean.
unfortunately I Have not tested them , so unable to tell you the bugs in each of them.

Oops i am sorry posted wrong link.
I know that that cm 10 is jb and 9 ics
http://main.develoid.com:82/samsung/Galaxy/Galaxy S/Sayanogen/M110S CM7.2(TOUCHWIZ4.0).tar
This is cm 7.2 touchwiz 4 tar want to know bugs.
Thanks in advance.
Sent from my GT-I9070 using xda app-developers app

shaikhsumair99 said:
This is cm 7.2 touchwiz 4 tar want to know bugs.
Thanks in advance.
Click to expand...
Click to collapse
like i said earlier , have little knowledge about its current development or bugs, as far as I know, they stopped short of fixing bugs when CM 10 came into the picture. So best you test it out.
visit PIT STOP for 7.2 version 3 plus guide (click on original post to see screenshots and latest info) and 7.2 perfect version download from here

It means there are no bugs in 7.2cm sms fixed.zip
And there is swap support.
Sent from my GT-I9070 using xda app-developers app

shaikhsumair99 said:
It means there are no bugs in 7.2cm sms fixed.zip And there is swap support.
Click to expand...
Click to collapse
I hope so, that's what perfect should mean but may mean different in Korea so check it out.

xsenman said:
I hope so, that's what perfect should mean but may mean different in Korea so check it out.
Click to expand...
Click to collapse
Thanks for support.
Just one thing I have to flash cm7finalkernel.tar and gapps also.
There are 2 kernel tar files cm7.2oc.tar something like that help.
So there is no kernel in the zip.
Or these kernel have special features.
Thanks.
Sent from my GT-I9070 using xda app-developers app

hey bro. i'm just a little confused, what kernel should i use for a jellybean rom?

shaikhsumair99 said:
Thanks for support.
Just one thing I have to flash cm7finalkernel.tar and gapps also.
There are 2 kernel tar files cm7.2oc.tar something like that help.
So there is no kernel in the zip.
Or these kernel have special features.
Thanks.
Click to expand...
Click to collapse
looks like provision made a new kernel even for Jellybean, so it can flashed using odin3 after flashing ROM & gapps. oc means its an overclocked version
swiftcity1305 said:
hey bro. i'm just a little confused, what kernel should i use for a jellybean rom?
Click to expand...
Click to collapse
you use the one that is included in the ROM package. and can be updated with new version of that kernel later, you cannot use gingerbread kernels like (tegrak or speedmod)

Rom 4.4.4 - Liquid Smooth - unofficual build

Hi,
I found a link for Liquid Smooth unofficial build for our note on their google+ community.
http://dl.niimdroid.com/LiquidSmooth/n7000/
I just want to share. [emoji6]
Greetings from Germany
scoute-dich

really smooth perhaps the best I have tried (and I've tried many rom) thanks

wow that's awesome! are you the one building these?? I am going to try this asap
thank you very much for the link
REVENGE SOLVES EVERYTHING

tysonraylee said:
wow that's awesome! are you the one building these?? I am going to try this asap
thank you very much for the link
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
No, I didn't build it, I just found the link. But I also think that this is a good rom. I didn't found a xda-thread, so I posted it here...
Greetings from Germany
scoute-dich

flahsed the 18-10-2014 release
multi-user works
hover is included
seems very stable
Theme engine needs some updating but i guess should be included in the future updates
what else can i ask for
thank you very very much
Hope there would be an official thread for this

scoute-dich said:
No, I didn't build it, I just found the link. But I also think that this is a good rom. I didn't found a xda-thread, so I posted it here...
Greetings from Germany
scoute-dich
Click to expand...
Click to collapse
Its being made by the Great dev for the asylum omni "Bosko Trkulja" aka chasmodo
follow the link here...by the way,these are the blind builds of his,,,
https://plus.google.com/103683575509787472991/posts/GBdaA3FuKDp?cfem=1

DrNinjaa said:
Its being made by the Great dev for the asylum omni "Bosko Trkulja" aka chasmodo
follow the link here...by the way,these are the blind builds of his,,,
https://plus.google.com/103683575509787472991/posts/GBdaA3FuKDp?cfem=1
Click to expand...
Click to collapse
wow!!! chas is the man an awesome and talented dev indeed
REVENGE SOLVES EVERYTHING

Hi mates,
I've not seen any instructions about installing that ROM. With only 170GB probably it is not a full rom.
I haven't seen the kernel in it and also SecPhone.apk; SecContacts.apk; SecSetings.apk etc. . . . . even SystemUI.apk
Could somebody post any guidelines about installation, which kernel should be used etc. :fingers-crossed:
Should SNote apps etc. from Note3 works on it without any changes?
Thanks.

Avitohol said:
Hi mates,
I've not seen any instructions about installing that ROM. With only 170GB probably it is not a full rom.
I haven't seen the kernel in it and also SecPhone.apk; SecContacts.apk; SecSetings.apk etc. . . . . even SystemUI.apk
Could somebody post any guidelines about installation, which kernel should be used etc. :fingers-crossed:
Should SNote apps etc. from Note3 works on it without any changes?
Thanks.
Click to expand...
Click to collapse
This is an AOSP rom which is like a Google stock firmware found in nexus devices that's why the size is 170-200mb and yes this is a full rom though you have to download gapps separately
The firmware you are thinking about is the Samsung bloated firmware filled with unnecessary junk making it around 1 - 1.5GB and so we call it Crapsung
Sorry I despise Samsung firmware, never used it and never will
Also note since this is not a Samsung firmware you will not able to use Snote or any Samsung related application as they are not compatible with AOSP framework
The instructions to flash this firmware are as follows
1) download ROM (the kernel is included in the ROM itself )
2) download PA Gapps
3) make sure your device is ROOTED and if not rooted already, please ROOT your device. (This is a mandatory and important step)
4) download RAW kernel for KK ROMs. (we have to use this kernel as KK ROMs require SE Linux compatible recovery otherwise you will not be able to flash it)
Note : raw kernel doesn't becomes your device kernel. The kernel is bundled with the ROM which will get flashed along with it
5) move all downloaded files to internal or external SD.
6) Now on a ROOTED device, reboot it to recovery by pressing home key + power key + volume up key simultaneously.
7) Since you are already rooted I expect might also have flashed a custom recovery. If so take a nandroid backup with that recovery [ DO NOT SKIP THIS STEP ]
7) Once nandroid backup is done do the following
-wipe data factory reset
-wipe cache
-go to mounts and storage and format system
-go to advance and wipe dalvik cache
8) back to the main menu choose install zip and first install RAW kernel and once done navigate to advance and select "reboot recovery" [ do not skip this step]
9) assuming that everything went correctly you should now be booted into TWRP recovery. You could do a factory reset here too if you want
10)Now choose install and select the ROM file first and queue the Gapps file too and flash
11) once the process is complete reboot and setup your device accordingly
12) and if not already Welcome to real world of android (Aosp/cm11)
Simple right
Raw kernel can found in the development section of N7000 forum with a simple search make sure to download the one for KK ROMs.
As for Gapps just go to Google and type pa gapps and the first link will take you to PA Gapps xda thread. Choose your pick from there
hope that helps
thank you very much
REVENGE SOLVES EVERYTHING

tysonraylee said:
This is an AOSP rom which is like a Google stock firmware found in nexus devices that's why the size is 170-200mb and yes this is a full rom though you have to download gapps separately
The firmware you are thinking about is the Samsung bloated firmware filled with unnecessary junk making it around 1 - 1.5GB and so we call it Crapsung
Sorry I despise Samsung firmware, never used it and never will
Also note since this is not a Samsung firmware you will not able to use Snote or any Samsung related application as they are not compatible with AOSP framework
The instructions to flash this firmware are as follows
1) download ROM (the kernel is included in the ROM itself )
2) download PA Gapps
3) make sure your device is ROOTED and if not rooted already, please ROOT your device. (This is a mandatory and important step)
4) download RAW kernel for KK ROMs. (we have to use this kernel as KK ROMs require SE Linux compatible recovery otherwise you will not be able to flash it)
Note : raw kernel doesn't becomes your device kernel. The kernel is bundled with the ROM which will get flashed along with it
5) move all downloaded files to internal or external SD.
6) Now on a ROOTED device, reboot it to recovery by pressing home key + power key + volume up key simultaneously.
7) Since you are already rooted I expect might also have flashed a custom recovery. If so take a nandroid backup with that recovery [ DO NOT SKIP THIS STEP ]
7) Once nandroid backup is done do the following
-wipe data factory reset
-wipe cache
-go to mounts and storage and format system
-go to advance and wipe dalvik cache
8) back to the main menu choose install zip and first install RAW kernel and once done navigate to advance and select "reboot recovery" [ do not skip this step]
9) assuming that everything went correctly you should now be booted into TWRP recovery. You could do a factory reset here too if you want
10) Now choose install and select the ROM file first and queue the Gapps file too and flash
11) once the process is complete reboot and setup your device accordingly
12) and if not already Welcome to real world of android (Aosp/cm11)
Simple right
Raw kernel can found in the development section of N7000 forum with a simple search make sure to download the one for KK ROMs.
As for Gapps just go to Google and type pa gapps and the first link will take you to PA Gapps xda thread. Choose your pick from there
hope that helps
thank you very much
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Thanks. This is fully thorough instruction. Thanks :good:

My Liquid Smooth with Bauner Kernel, really fast! Thanks mythical chasmodo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-N7000 using Tapatalk

panamera2011 said:
My Liquid Smooth with Bauner Kernel, really fast! Thanks mythical chasmodo
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Made the switch to LS and Bauner kernel, very good combo ?

Ls 20142024
https://plus.google.com/103683575509787472991/posts/bRVf12Uec8Z

chasmodo said:
https://plus.google.com/103683575509787472991/posts/bRVf12Uec8Z
Click to expand...
Click to collapse
awesome!! will flash this when I get home
thank you very much
REVENGE SOLVES EVERYTHING

I am getting the error "unfortunately ui system process has stopped"
I have tried full wipe and also without gapps but still the same error.
is it just me or is anybody else getting it too??
REVENGE SOLVES EVERYTHING

Hi bro try with clean install there is no problem here....

yes the build is fine works perfectly
its my sim that was causing the FC's changing my sim solved the problem
REVENGE SOLVES EVERYTHING

Is that normal or battery draining could someone guide me what is causing my battery drain fast..

Ls 20141026
https://plus.google.com/103683575509787472991/posts/a7sBzu6JQJy

LS-KK-v3.2-2014-10-26-n7000 [emoji4]