hmmm I cant find the parameter for internal sdcard here in the fstab file
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
#storage_struct = series, "/storage/sdcard/extStorages"
#storage_struct = parallel
{
supported_exfat = yes
}
dev_mount sdcard /storage/extSdCard auto /devices/platform/s3c-sdhci.2/mmc_host/mmc1/
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sda /storage/UsbDriveA auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdb /storage/UsbDriveB auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdc /storage/UsbDriveC auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdd /storage/UsbDriveD auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sde /storage/UsbDriveE auto /devices/platform/s5p-ehci
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdf /storage/UsbDriveF auto /devices/platform/s5p-ehci
#EOF
Related
If you install one of the various TouchWiz ports for MIUI on CyanogenMod, you will end up loosing access to the internal SD in most apps. Here is how to fix it.
Using root explorer (or pulling the file in adb, editing it and pushing it back), open /etc/vold.fstab.
It should look like this:
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
dev_mount emmc /mnt/emmc 11 /devices/platform/s3c-mshci.0/mmc_host/mmc0/mmc0
# external sdcard
dev_mount sdcard /mnt/sdcard auto /devices/platform/s3c-sdhci.2/mmc_host/mmc1
# USB storage device
dev_mount usbdisk /mnt/usbdisk auto /devices/platform/s3c_otghcd/usb
In this file, do the following edits:
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
dev_mount [B][COLOR="Red"]sdcard[/COLOR][/B] /mnt/[B][COLOR="red"]sdcard[/COLOR][/B] 11 /devices/platform/s3c-mshci.0/mmc_host/mmc0/mmc0
# external sdcard
dev_mount [B][COLOR="red"]emmc[/COLOR][/B] /mnt/[B][COLOR="red"]emmc[/COLOR][/B] auto /devices/platform/s3c-sdhci.2/mmc_host/mmc1
# USB storage device
dev_mount usbdisk /mnt/usbdisk auto /devices/platform/s3c_otghcd/usb
That is it. I still don't understand what in the TouchWiz framework causes this issue, but I don't have the need to dig deeper.
Download TouchWiz apps for miui (ported by langtheng?)
Thanks!
Does this port bring the touching camera to cm7?
Sent from my GT-I9100 using xda premium
xethor said:
Download TouchWiz apps for miui (ported by langtheng?)[/URL]
Click to expand...
Click to collapse
Nopes, It is amitmiz who did it!
Ok i have a deivce with the same specs as the I9000 BUT the vold.fstab is different so help me please I only getting external sd as my sd
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
## Example of a standard sdcard mount for the emulator / Dream
# Mounts the first usable partition of the specified device
#dev_mount sdcard /mnt/sdcard auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
dev_mount flash /mnt/sdcard auto /devices/virtual/mtd/mtd9/mtdblock9
dev_mount sdcard /mnt/external_sd auto /devices/platform/rk29_sdmmc.0/mmc_host/mmc0
dev_mount udisk /mnt/usb_storage auto /devices/platform/usb20_host/usb /devices/platform/usb20_otg/
## Example of a dual card setup
# dev_mount left_sdcard /sdcard1 auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
# dev_mount right_sdcard /sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/msm_sdcc.3/mmc_host/mmc1
## Example of specifying a specific partition for mounts
# dev_mount sdcard /sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
Hi everybody !
I've got a Galaxy S4 i9505 and I wanted to know if anybody succeed to edit the vold.fstab file and swap internal and external storage ? I tried to invert it :
Code:
{
supported_exfat = yes
}
dev_mount sdcard /storage/extSdCard auto /devices/platform/msm_sdcc.4/mmc_host/mmc2/ /devices/platform/msm_sdcc.2/mmc_host/mmc2/
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sda /storage/UsbDriveA auto /devices/platform/msm_hsusb_host/usb
like that :
Code:
{
supported_exfat = yes
}
dev_mount sda /storage/UsbDriveA auto /devices/platform/msm_sdcc.4/mmc_host/mmc2/ /devices/platform/msm_sdcc.2/mmc_host/mmc2/
#usb host device
{
media_type = usb
supported_exfat = yes
}
dev_mount sdcard /storage/extSdCard auto /devices/platform/msm_hsusb_host/usb
But it failed :crying: . So did you saw an error or do you know how to edit it ?
Thank you a lot for your answers !
Been discussed... doesn't work, so many use FolderMount.
Sent from my Galaxy Nexus using Tapatalk 2
najaboy said:
Been discussed... doesn't work, so many use FolderMount.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Ok thanks
* *
* *
Looks like you tried to swap the mount of the USB and the extSdCard.
I believe the sdcard mount is actually controlled in the vold.conf on the S4 could be mistaken.
Hi everyone,
My brother still uses his ZTE Blade 1 (The original one with the OLED Display) and is still very happy with it. But he has 2 concerns: 1. The phone got a little bit slower 2. internal is always full
So I checked it out and it still uses a custom rom called Japanese Jellyfish RLS 9 (Android 2.2) and it has Clockworkmod Recovery 2.5.1.8 installed.
My plan was to update to a stable and newer rom and to edit the vold.fstab to swap internal to external (a 16gb sdcard).
But I don't have any clue, it is very hard for me to find the correct resources. So I assume this Blade is still Gen1, what are the best steps to update to Gen2, while maintaining all the Data like whatsapp history and so??
Also which is the most stable, fastest and newest ROM for the Blade? It doesn't need fancy features, it should just be fast so he can keep on using it as his main phone
Also his current fstab looks like this:
Code:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
## Example of a standard sdcard mount for the emulator / Dream
# Mounts the first usable partition of the specified device
#dev_mount sdcard /mnt/sdcard auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
## Example of a dual card setup
# dev_mount left_sdcard /sdcard1 auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
# dev_mount right_sdcard /sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/msm_sdcc.3/mmc_host/mmc1
## Example of specifying a specific partition for mounts
# dev_mount sdcard /sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
dev_mount sdcard /mnt/sdcard auto /devices/platform/msm_sdcc.1/mmc_host/mmc0
How to edit it to swap internal with external?
Thank you very much and merry christmas!
No one?
any way to force change the system to recognise external sd card as internal and vice versa???? i dont want to use lind2sd doesnt work orfoldermount which works but is too demanding when you give this to a child who downloads everything.
the vold file is here
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
## Example of a standard sdcard mount for the emulator / Dream
# Mounts the first usable partition of the specified device
#dev_mount sdcard /mnt/sdcard auto /devices/platform/sdhci-pxav3.0/mmc_host/mmc1
dev_mount external_sdcard /mnt/external_sdcard auto /devices/platform/sdhci-pxav3.0/mmc_host/mmc1
dev_mount internal_sdcard /mnt/sdcard 15 /devices/platform/sdhci-pxav3.2/mmc_host/mmc0
## Example of a dual card setup
# dev_mount left_sdcard /sdcard1 auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
# dev_mount right_sdcard /sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/msm_sdcc.3/mmc_host/mmc1
## Example of specifying a specific partition for mounts
# dev_mount sdcard /sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1