Database Users

[Q] plz help me with my defy

my defy stuck on motorola logo after i was trying to install the cm7.2 rom
and the blue led isn't flash
I tried to flash it with motorola RSD lite but when I enter boot loader mode and connect it to my computer (Windows 7 64bit) it says it couldn't find the driver for S Flash OMAP3630
I've googled and I just can't find a driver for this thing anywhere!
what should i do ?? plz help me

7mrawy said:
my defy stuck on motorola logo after i was trying to install the cm7.2 rom
and the blue led isn't flash
I tried to flash it with motorola RSD lite but when I enter boot loader mode and connect it to my computer (Windows 7 64bit) it says it couldn't find the driver for S Flash OMAP3630
I've googled and I just can't find a driver for this thing anywhere!
what should i do ?? plz help me
Click to expand...
Click to collapse
Have you installed the latest drivers?
http://forum.xda-developers.com/showthread.php?p=17247255
If you still cant get it to flash, then try on a Win Xp PC if you have dual boot or at friend's place.

zopeon said:
Have you installed the latest drivers?
http://forum.xda-developers.com/showthread.php?p=17247255
If you still cant get it to flash, then try on a Win Xp PC if you have dual boot or at friend's place.
Click to expand...
Click to collapse
still couldn't find the driver for S Flash OMAP3630 ??
but thanks

Download Motorola Device Manager for Windows 7.
http://www.motorola.com/Support/CA-EN/Support-Home/USB-Drivers-and-PC-Charging-Drivers
If you want to flash cm7.2, you have to make sure to wipe data + cache + dalvik before flashing, and make
sure that you run a froyo kernel, not GB.

Have you tried using stock bootloader ? from there you must just do a factory wipe / reset and it should be all good check here , maybe it will help you ! :good:
Hit thanks button if i helped it

please help bricked defy led white

Very good friends. I have a motorola defy MB525 bricked. not start. when I connect to PC, LED lights in white and does not recognize me from zero to flash firmware with RSD Lite (I hope you can give me some solution.
note: buy another battery thinking it was the battery but does not work. nor I can enter bootloader mode.

charge the battery in another defy or external charger, then try again RSD

help
snmatias said:
charge the battery in another defy or external charger, then try again RSD
Click to expand...
Click to collapse
use a motorola defy+ firmware and now I can not go down to froyo 2.2 any idea to go back?

If you used too high version of original SBF, it may be impossible to downgrade. Compare your SBF version with list from this post: http://forum.xda-developers.com/showpost.php?p=11588065&postcount=1 .

thrackanomir said:
If you used too high version of original SBF, it may be impossible to downgrade. Compare your SBF version with list from this post: http://forum.xda-developers.com/showpost.php?p=11588065&postcount=1 .
Click to expand...
Click to collapse
my device is a motorola defy and put a firmware defy motorlola not exactly what I had my defy time as it makes you install cyanogenmod 7. I've tried many original SBF and are stock and some just turns the screen on the logo then automatically enters bootloader mode but not always start stays in bootloader mode.
this was the last to use:
DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.sbf
which I use to work then again my motorola defy?
this puts me in the bootloader:
Bootloader
09.10
Err:A5,69,35,00,27
Batery OK
OK to Program
Connect USB
Data Cable
thanks in advance for the help.

Does flashing dfp 231 give bl error or blank screen?
If so then your defy is unfixable
Sent from my MB526 using Tapatalk

thekguy said:
Don't use stock now, is dfp 231 sending you to bl error?
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
explain better, I understand nothing.

thekguy said:
Does flashing dfp 231 give bl error or blank screen?
If so then your defy is unfixable
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
my motorola defy only lights on the M logo and freezes there then putting me back to bootloader the following:
Bootloader
09.10
Err:A5,69,35,00,27
Batery OK
OK to Program
Connect USB
Data Cable
thanks in advance for the help.

lildark7 said:
my motorola defy only lights on the M logo and freezes there then putting me back to bootloader the following:
Bootloader
09.10
Err:A5,69,35,00,27
Batery OK
OK to Program
Connect USB
Data Cable
thanks in advance for the help.
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?t=1595013

atulclassic said:
try this
http://forum.xda-developers.com/showthread.php?t=1595013
Click to expand...
Click to collapse
as I do the wipe?

I had exact same error as you today, and had to reflash DFP-231 more than one time, but in the end it worked.
i followed instructions from here:
http://forum.xda-developers.com/showthread.php?t=1542956
so, using RSD Lite version 6.1.5 i flashed DEFYPLUS_U3_4.5.1-134_DFP-231 (when it tries to reboot i get the same error as you, but i continue process and go ahead and flash the second ROOTED sbf)
http://sbf.droid-developers.org/umt..._USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf.gz
then i flashed same version firmware as above but ROOTED from this link ..
http://www.mediafire.com/?76z12j1at3etf4j
if stuck in bootloop Motorola-logo after flashing ROOTED SBF, just follow "stuck in bootloop advice" in first post here:
http://forum.xda-developers.com/showthread.php?t=1618718
so basically i did ..
1. flash SBF with RSD Lite
2. got strange error message: "Bootloader 09.10 Err:A5,69,35,00,27 Batery OK OK to Program Connect USB"
3. flash ROOTED SBF with RSD Lite
4. stuck in motorola-logo bootloop
5. take out battery
6. hold power button and VOL+ pressed when putting battery back to enter "stock android boot menu"
7. restore factorysettings + wipe cache
8. boot notmal into "horrible motoblur"..
9. install SndInitDefy_2.3.apk
10. install defy_twrp_recovery.2.3.6.0.zip
11. install update-recovery.zip (from quarx kit kat thread)
12. i installed cm-11-20140326-NIGHTLY-mb526.zip ( http://forum.xda-developers.com/showthread.php?t=2515036 )
13. SUCCESFUL REBOOT !
Seems direct to CM11 is ok nowdays http://forum.xda-developers.com/showpost.php?p=51101948&postcount=731
Useful threas if u get stuck with other things during the process:
http://forum.xda-developers.com/showthread.php?t=1828639
http://forum.xda-developers.com/showthread.php?t=2568325

slstr said:
I had exact same error as you today, and had to reflash DFP-231 more than one time, but in the end it worked.
i followed instructions from here:
http://forum.xda-developers.com/showthread.php?t=1542956
so, using RSD Lite version 6.1.5 i flashed DEFYPLUS_U3_4.5.1-134_DFP-231 (when it tries to reboot i get the same error as you, but i continue process and go ahead and flash the second ROOTED sbf)
http://sbf.droid-developers.org/umt..._USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf.gz
then i flashed same version firmware as above but ROOTED from this link ..
http://www.mediafire.com/?76z12j1at3etf4j
if stuck in bootloop Motorola-logo after flashing ROOTED SBF, just follow "stuck in bootloop advice" in first post here:
http://forum.xda-developers.com/showthread.php?t=1618718
so basically i did ..
1. flash SBF with RSD Lite
2. got strange error message: "Bootloader 09.10 Err:A5,69,35,00,27 Batery OK OK to Program Connect USB"
3. flash ROOTED SBF with RSD Lite
4. stuck in motorola-logo bootloop
5. take out battery
6. hold power button and VOL+ pressed when putting battery back to enter "stock android boot menu"
7. restore factorysettings + wipe cache
8. boot notmal into "horrible motoblur"..
9. install SndInitDefy_2.3.apk
10. install defy_twrp_recovery.2.3.6.0.zip
11. install update-recovery.zip (from quarx kit kat thread)
12. i installed cm-11-20140326-NIGHTLY-mb526.zip ( http://forum.xda-developers.com/showthread.php?t=2515036 )
13. SUCCESFUL REBOOT !
Seems direct to CM11 is ok nowdays http://forum.xda-developers.com/showpost.php?p=51101948&postcount=731
Useful threas if u get stuck with other things during the process:
http://forum.xda-developers.com/showthread.php?t=1828639
http://forum.xda-developers.com/showthread.php?t=2568325
Click to expand...
Click to collapse
thanks for the help served me.
by wilderness as installed CM11? I did the wipes, then install the rom and Gapps but then says setup.service first start is stoped. how can I fix that?

lildark7 said:
thanks for the help served me.
by wilderness as installed CM11? I did the wipes, then install the rom and Gapps but then says setup.service first start is stoped. how can I fix that?
Click to expand...
Click to collapse
First boot without gapps and configure phone, then re-boot into twrp and install gapps. Many people use minimal gapps (by banks ?..) because of defy low memory specs..
you find link to BANKS' minimal gapps in Quarx's CM11 kitakat thread, first post i think. or just use search.
best of luck!

RSD Lite dont find my Stone2

Hi guys,
I want to update my Milestone 2 from cm10 to cm11. So I reboot and wipe in recovery. After that my phone restart his self and it doesnt boot up. I want to restore my Milestone and download sbf,rsdlite and the driver. I install it and the driver reboot my pc and choose the sbf file. Than I boot my Milestone 2 to bootloader and connect to my pc. In device manager they show my "motorola flash interface" and the rsd lite dont find my Phone. On my computer are Windows 8.1.

Be sure you don't use an USB 3.0 port. There's a but in RSD Lite, which prevents it from MS2 flash mode detection on USB 3.0 under Win 8.1 at least. Either try to flash from an older PC, or disable USB 3.0 in BIOS (changing to 2.0 helped in my case).

[q] urgent!!! How to install cwm on soft bricked lenovo a6000 plus

How to install CWM Recovery without USB Debugging enabled on LENOVO A6000 Plus?
I've tried minimal adb & flashboot, but it failed.
NB : My phone is soft bricked after installed system update on my rooted lenovo a6000 Plus. [Update kraft-a6000-s_s010_150515]
Please, help me. :crying:

query
I am also having the same problem......
can anyone help?
please plesae

vokkus kreatif said:
How to install CWM Recovery without USB Debugging enabled on LENOVO A6000 Plus?
I've tried minimal adb & flashboot, but it failed.
NB : My phone is soft bricked after installed system update on my rooted lenovo a6000 Plus. [Update kraft-a6000-s_s010_150515]
Please, help me. :crying:
Click to expand...
Click to collapse
Same here...
Did you find any solution

lenovo a60000 ran into problem
hi my lenovo a60000 ran into problem it just vibrates and shows lenovo
start screen and not going anywhere from there,its not even going into
recovery mode,even when i connect to pc it doesn't show up there too,is
there any other alternative to fix it or is my phone cannot be
recovered,any help will really appreciate.

SAME same seems like there is no help out there and we might have to use our phones as paperweight!

hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all

sp_grewal said:
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
Click to expand...
Click to collapse
thanks a lot dude finally my phone got new life thanks to you and boycracked

Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me

vinod352 said:
Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me
Click to expand...
Click to collapse
1. Download custom recovery for lenovo a6000 lollipop, just googling "[A6000]TWRP-2.8.6.0_no_theme.img" (without quotes)
2. download installation zip of supersu from chainfire, just googling "BETA-SuperSU-v2.49.zip" (without quotes)
3. Enter to fastboot, type "fastboot boot [A6000]TWRP-2.8.6.0_no_theme.img" (without quotes) in cmd/terminal. wait for a moment... until your phone land on custom recovery (TWRP)
4. flash file "BETA-SuperSU-v2.49.zip".

Sent from my Lenovo A6000 using XDA Free mobile app
Bro Thanx for reply.I will try and I'll tell here if it success

Please help me my lenovo a6000 is not booting into system or recovery only fastest even after factory rest clear cache and dalvik installing stock rom ?

Thanks!
sp_grewal said:
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
Click to expand...
Click to collapse
Thanks.
I did see the boycracked website but i couldn't get my deivce into 9008 mode..thanks a lot

Not able to enter the recovery
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...

BenNy tHa said:
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
Click to expand...
Click to collapse
Flash stock recovery with fastboot

BenNy tHa said:
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
Click to expand...
Click to collapse
Just flash a custom one... No image twrp recovery.. It's the only one working now.. You can get it just Google it

gks131 said:
Just flash a custom one... No image twrp recovery.. It's the only one working now.. You can get it just Google it
Click to expand...
Click to collapse
I tried its not working,after flashing when I reboot to recovery it stays @ the android logo page .
May be I'm not doing it properly.
Can u help me with the steps to do it??

BenNy tHa said:
I tried its not working,after flashing when I reboot to recovery it stays @ the android logo page .
May be I'm not doing it properly.
Can u help me with the steps to do it??
Click to expand...
Click to collapse
If you are on lollipop flash this one
http://www.mediafire.com/?7d6aoevnk52cg5i
Use fastboot flash recovery recovery.img

My phone does not reboot

batmanx0369 said:
hi my lenovo a60000 ran into problem it just vibrates and shows lenovo
start screen and not going anywhere from there,its not even going into
recovery mode,even when i connect to pc it doesn't show up there too,is
there any other alternative to fix it or is my phone cannot be
recovered,any help will really appreciate.
Click to expand...
Click to collapse
same problem ; please post if u have found a solution

kanna9999 said:
same problem ; please post if u have found a solution
Click to expand...
Click to collapse
Just use fastboot to flash twrp 3.0.0 by sevenmax (just Google it)
Command:
Fastboot flash recovery (then recovery name.zip or .img)
Then flash from it the rom you like
Sent from my GT-I9300I using Tapatalk

Jiayu S3 bootloop problem

Hi i have a Jiayu S3 which for the second time breaks up firstly from my official rom crashed unknown why and my brother managed to relive it installing twrp recovery and xtreme rom. Now againb crashed and enter in a bootloop while surfing on the net. I have to mention that i have [email protected] up my devive some time ago and cannot connencted via usb (pc or usb stick) things that used to do very often. Know i manage to get ito recovery install miui 9 rom(from need rom) but reboot continiously....get back to xtreme (from need rom again) and reboot continously...tried miui 7 rom boot loop again. So i stuck to boot loop!!! i can not use SP flash tools because my PC refuses to intall the correct MTK, MEDIATEK MT66XX or any VCOM ,usb etc drivers (( . It only sees my device as a composite device. I can't use fastboot as long as i don't know how to do it and how i can connect my device to pc . Please help is there any way i can get out of bootloop via sd card from recovery mode?? I am exhausted reading and searching and watching tutorials....Thanks in advance.
PS i manage only 2 times to enter in a chinese mode(black screen) but i don't know how to proceed in that and what does this mode do.

Still no one to help??
Hi again,
No one is willing to help me with my issue ok . I ll ask something else. My pc recognizes my jiayu as composite device , my samsung gt-s6102 2.3.6 android as cdc device and only my huawei lua-01 as android phone lua-01. Could you please help me how to overcome this and procced to frash my jiayu because it didn't seem to get over bootloop while i was trying to install rom via twrp 3.0.2 when i try. Or if you know if there is a file i should delete in file manager so i can proceed over bootloop... thanks in advance.

giolandis said:
Hi again,
No one is willing to help me with my issue ok . I ll ask something else. My pc recognizes my jiayu as composite device , my samsung gt-s6102 2.3.6 android as cdc device and only my huawei lua-01 as android phone lua-01. Could you please help me how to overcome this and procced to frash my jiayu because it didn't seem to get over bootloop while i was trying to install rom via twrp 3.0.2 when i try. Or if you know if there is a file i should delete in file manager so i can proceed over bootloop... thanks in advance.
Click to expand...
Click to collapse
Hi,
can you flash a ROM using SP-Flash Tools? With SPF you don't need the mobile to be switched on. Of course drivers for MTK must be installed properly before doing this. Maybe clearing cache and Dalvik could help as well.