So, recently I installed the WIUI mod on my Defy+, but I didn't like it at some points, so, naturally, I decided to go back to Gingerbread. I've downloaded RSD Lite and the Sbf file to start flashing, everything went ok, but nothing changed at all!
Now, my phone have the WIUI boot on infinite loop and I don't have access to anything. Please guys, help me to get back on Gingerbread.
*Sorry for the bad english, I'm Brazillian
Hi, make a factoryreset, flash and then again factoryreset.
Gesendet von meinem MB526
After finish flashing, make Wipe Data and Cache on stock recovery ( Power and Vol - )
Related
helloo everyone!
basically what i did was backed up my current stock froyo rom, and then followed the steps for the "deblurred gingerbread rom" on how to flash it, i then went to reboot my phone.and got stuck on the M logo have pulled the battery several times im lost at what to do so please anyone help? i would be very grateful
you should press volume-down + camera key both, and poweron your phone to enter bootloader to flash the fixedsbf.
it will not automatically enter to the bootloader.
how do i go about flashing the fixed sbf?
i put my phone into bootloader and opened rsd lite and my phone wasnt recognised?
what am i meant to do
All the information is findable on this forum!
First; the howto flash SBF: http://forum.xda-developers.com/showthread.php?t=1032372
Second; the SBF file you need to flash: http://www.multiupload.com/KL6LSHIRCS
So with that howto you need to flash the SBF provided in this post. After that it'll work.
when i plug my phone into the computer in bootloadermode and find the sbf file in rsd and press start, nothing happens? i have motorola driver installed?
Can you post a screenshot of RSD Lite with your phone connected and the SBF selected?
Also try to reboot and try again.
i was playing around with different things and managed to get my phone mounted to rsd the phone has booted! i did a full data wipe and cache wipe and im just restoring my apps back with titanium backup, if i wanted to have all the blur services, would i now be able to restore the nand backup of the other gingerbread rom? or would i have to go through the whole process again?
If you want the Blur services now you just need to flash the MS2Ginger Nandroid in CWM.
...and the other way around offcourse. hf!
Hello guys.
I searched a lot but didn't got the answer i was needing.
I have installed MS2Ginger 2.1 Green Lens by walter79 on my Defy with SOC module.
I have installed as stated restored the nandroid of MS2Ginger2.1 my question is can i get back to my nandroid back up of 2.2.2 just by restoring? or do i have to flash and fixed sbf? how do i get back to stock 2.2.2? when i bought my defy it was having 2.2.2.
I am very confused many say that MS2Ginger is based on GB kernel and i also saw that Greenbreadmod which is included in MS2Ginger2.1 is compitable with froyo kernel. Someone put me in light for getting back to 2.2.2.
Sorry for bad english!
Can some one please help me to get 2.2.2
wipe data & cache using stock recovery by turning off your phone ..and turning on with vol down..Now reboot get into boot loader by pressing vol up..connect to rsd lite..if you don't have rsd lite..download it..from the thread in development section and also install Motorola drivers..connect your phone in bootloader to rsd lite..it should show connected..now browse through the sbf on your computer ..if not downloaded ..please download one from the defy development thread..i believe you're from India..& so you can flash full sbf just download south east asia full sbf for 2.2 & extract it..and then install it through rsd lite.. that's it...you'll be back to stock..Hope that helps..
Merry Christmas & Happy Holidays
sundawg said:
wipe data & cache using stock recovery by turning off your phone ..and turning on with vol down..Now reboot get into boot loader by pressing vol up..connect to rsd lite..if you don't have rsd lite..download it..from the thread in development section and also install Motorola drivers..connect your phone in bootloader to rsd lite..it should show connected..now browse through the sbf on your computer ..if not downloaded ..please download one from the defy development thread..i believe you're from India..& so you can flash full sbf just download south east asia full sbf for 2.2 & extract it..and then install it through rsd lite.. that's it...you'll be back to stock..Hope that helps..
Merry Christmas & Happy Holidays
Click to expand...
Click to collapse
Thanks a ton!!!
this worked very well i am now on 2.2.2 SEA15 ! Great thanks once again!
actually, you could have also used the backup if you had created of 2.2.2 original froyo before you installed MS2ginger...
the steps are...
wipe date / wipe cache / wipe dalvik in advance...
restore the froyo nandroid you had created...
then the power on and vol+ steps as mentioned above...
hello,
is it possible to switch from cm7.1-nightly to ms2ginger easily?
(cm7.1 is android v. 2.3.7 with kernel 2.32.9)
regards
Yes you can do that easily. The ms2Ginger thread has enough information on how to do that. I have switched twice from Cm7 to ms2g and vice versa.
In a nut shell just restore the manseoid back up of ms2g system, data, boot , dev tree and recovery. Before you do this just take nandroid backup of your current cm 7, which can be useful to switch back at later time if needed.
Sent from my MB526 using XDA App
ok. after installing ms2ginger it seem to be not my flavour.
i tryed to install cm72 (120131.05331-nightly) by epsylon. now, the device boots up, lights blue and green up and nothing more happens..
what can i do? (got backup but want a fresh install)
regards
now, when i push the poweron button, nothing happens..
the led lits up, when usb plugged in.. but thats all..
help?
_xo said:
now, when i push the poweron button, nothing happens..
the led lits up, when usb plugged in.. but thats all..
help?
Click to expand...
Click to collapse
CM7.2 is for Defy+ which uses GB kernel.
You can either flash CM7 kernel if it works, otherwise go to advance restore and restore boot and devtree from MS2 nandroid.
hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help
coolgame said:
hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help
Click to expand...
Click to collapse
Are you installing MS2G 2.1? and Did you follow the complete restore of nandroid backup, - system, data, boot, devtree and recovery?
yup i did twice.
coolgame said:
hey guyz need some help here.i own a defy+. i dont noe why but when i tried to install the walter9 MS2Ginger over the CM7.2,i got the bootloader err msg and the phone wouldnt startup.then i flashed the 2.3.6 sbf file via rsdlite and phn was back to its original working condition.then i rooted it again and then again tried MS2Ginger but after installation in recovery it asks for reboot.and after reboot, i got the same error saying
the same thing again
Bootloader
09.10
Err:A5,70,00,0023
again had to flash to original sbf
need help
Click to expand...
Click to collapse
I am searching for the instructions too:
http://forum.xda-developers.com/showthread.php?t=1468867&page=2
Will work the ms2ginger with cg version 6?
Anyone?
I had managed to get working, with instruction in the ms2ginger topic
To begin:
Put the Nandroid backup folder MS2Ginger on the SDCard in this folder: /sdcard/clockworkmod/backup
Root your DEFY and Install BOOTMENU - CWM (2ndInit-Installer 2.0.apk - install 1.0.7) or use this SndInitDefy_2.0.apk
REBOOT
run 2nd-init (voldown on blue LED)
wipe data and cache in "Stable/Custom - Recovery"
Go to "Recovery"
Go to "Latest Recovery"
Go to "Backup and Restore"
Go to "Restore" (system+data)
reboot.
Booting up can take a while, max is about 10 minutes.
THEN(if you want to try also the 3.0)
wipe data/cache/dalvik; Do an advanced recovery and only restore system and data from 3.0NG.
Hi, i have defy+ (mb526)
android version: 2.3.7
kernell: 2.6.32.9-gb08c3c8
cyanogenMod-7.1..0-jordan
Gingerbread GWK74
I want to flash CM 7.2 (http://forum.xda-developers.com/showthread.php?t=1445259) but after flash rom, I stuck on boot logo, i wait 30minut, reboot, wait, reboot... but without succes.
You must delete the user data of your previous rom first. Go to CWM Recovery and choose 'wipe data/factory reset'. This will remove all your user data (apps, app data, settings etc.) so you should have a backup if you want to keep the data!
i try this, but without succes. I'am still on boot logo (google) :-(
Dobre den,
There is something wrong in your phone setting : the kernel you mention in your first post (2.6.32.9-gb08c3c8) is a Froyo kernel and your phone (MB526) has a GB bootloader who only accept GB kernel...
So I think the best for you is to flash a full GB SBF via RSDLite before flashing the CM 7.2 Defy+.
Nashle...;-)
This has happened to me... A LOT. the way i fixed it was to redownload CM7 from the pc, because something went wrong the first time.
mankymoo said:
This has happened to me... A LOT. the way i fixed it was to redownload CM7 from the pc, because something went wrong the first time.
Click to expand...
Click to collapse
Your phone is a Defy or a Defy+ ? because I'm not sure you help a lot with this kind of answers.
Thanx, after flash ful SBF GB via RSDlite, everything is OK
I have q defy, however the filestructure is almost exactly the same and a fresh install of anything is the key (usually) to fix any problem... therefore I tend to ask them to do that before anything else
Sent from my MB525 using XDA App
stuck on bootlogo
i have defy+ (stock 2.3.6 - 4.5.1-134_DFP-1321)
rooted & flashed Quarx's 3 Mach ICS CM9 nightly..
i tried to update that but i guess i flashed some wrong zip in recovery & phone showed some bootloader error..
so i flashed full sbf via RSDlite to return to my stock rom..after flashing is complete, rsdlite reboots my phone, phone is stuck on motorola bootlogo & rsdlite shows "please manually powerup this phone"..still connected to usb..even when i disconnect phone from usb, phone keeps rebooting & stuck on bootlogo..
update
clearing data/cache in stock recovery solved the problem..back on CM9
GUYS i am stuck in a Big problem.......
i actually wanted to change my ROM from Quarx Nightly Builds(jb) to WIUI (jb) according to the instructions in http://forum.xda-developers.com/showthread.php?t=1161110 i installed 2ndinit 1.4.2 and went to bootmenu and kept the default to 2ndint and after that when i went to recovery 2 options were their 1)stock recovery and 2) (forgot name) recovery so i went to stock memoery to wipe cache /data but i found nothing so i rebooted but from here trouble started it stuck at motorola ICON and dont start i asked 1 of my group mate about this he told me to flash my phone with SBF file so i flashed it sum SBF file later found that its SBF file of DEFY not DEFY + and now the phone does'nt even start only blank screen no "DISPLAY IS SEEN" pls any help i will be thank full to them
rahul uzumaki said:
GUYS i am stuck in a Big problem.......
i actually wanted to change my ROM from Quarx Nightly Builds(jb) to WIUI (jb) according to the instructions in http://forum.xda-developers.com/showthread.php?t=1161110 i installed 2ndinit 1.4.2 and went to bootmenu and kept the default to 2ndint and after that when i went to recovery 2 options were their 1)stock recovery and 2) (forgot name) recovery so i went to stock memoery to wipe cache /data but i found nothing so i rebooted but from here trouble started it stuck at motorola ICON and dont start i asked 1 of my group mate about this he told me to flash my phone with SBF file so i flashed it sum SBF file later found that its SBF file of DEFY not DEFY + and now the phone does'nt even start only blank screen no "DISPLAY IS SEEN" pls any help i will be thank full to them
Click to expand...
Click to collapse
Can you enter to the bootloader, if you can, try flashing another SBF.
LeonardoJegigzem said:
Can you enter to the bootloader, if you can, try flashing another SBF.
Click to expand...
Click to collapse
yeap actually the phone was not at all starting so one of my fb friend told me too on the phone pressing the power button -vol and putting the battery at the same tym and vola bootloder is on and then i flashed it with standard SBF file anyway thanks a TON :good: