charger - Galaxy Tab 10.1 General

Whats the recommend charger for the galaxy tab 10.1? My asus uses a 15v plug and I've noticed the plug on my galaxy tab is a 10.1 so wondering what is a recommended charger for the galaxy tab 10,1 is.

ajac said:
Whats the recommend charger for the galaxy tab 10.1? My asus uses a 15v plug and I've noticed the plug on my galaxy tab is a 10.1 so wondering what is a recommended charger for the galaxy tab 10,1 is.
Click to expand...
Click to collapse
??????

jaswinky said:
??????
Click to expand...
Click to collapse
aka what charger should I use for the galaxy tab. Is it fine with the standard cell phone style wall wart or should I use one a bit more powerful?

ajac said:
aka what charger should I use for the galaxy tab. Is it fine with the standard cell phone style wall wart or should I use one a bit more powerful?
Click to expand...
Click to collapse
Ok. Your tab will demand 1,5A only if it detects a original samsung charger (or if you are using a male-female usb adapter which simulates it); because this, the original samsung charger is 2A limited. Using a different charger, if you are using the stock kernel, it will demand only 450mA, just about the current that the tab drains swithed on with not too much activity so, the tab only will effective be charged swithed off and 3-4 times longnthan using original samsung charger.
If you use a modified kernel that allows it, you will be able to charge the tab at 1,5A even using a non-samsung charger, but be aware, the charger need to be at least 1,5A supported; if don't, two things could happen, if the charger is about new (or usb ports in a no-old pc), it will cut the current and the tab will permanently be charging and no charging (bad for the battery); if the charger is about old (maybe 10 years), surely it will not have a current limmiter, so the charger (or the old PC) will get smoked...
So, you will need to buy a 2A original samsung charger or, you can use a 2A non-samsung charger using a mod kernel as A1 kernel. Temporaly you can charge the tab using a 0,5A-1A non-samsung charger with the tab off, at very slow charging...
Enviado desde mi GT-P7510 usando Tapatalk 2
---------- Post added at 03:53 AM ---------- Previous post was at 03:48 AM ----------
ajac said:
aka what charger should I use for the galaxy tab. Is it fine with the standard cell phone style wall wart or should I use one a bit more powerful?
Click to expand...
Click to collapse
Also note, about the voltage, all USB chargers are 5V only, and not 15V.
Enviado desde mi GT-P7510 usando Tapatalk 2

jaswinky said:
Using a different charger, if you are using the stock kernel, it will demand only 450mA, ...
If you use a modified kernel that allows it, you will be able to charge the tab at 1,5A even using a non-samsung charger, ...
Click to expand...
Click to collapse
That is not correct.
With the stock kernel the tab will only (!) charge with the original charger, unless a special adaptor is used. When connecting a non original charger or connecting the tab to a computer USB port, the battery symbol is Xed-out and the tablet doesn't charge. With the adaptor, that fools the tab into thinking an original charger is used, the tab will draw up to 2 Amps.
With the modified kernels the tab will also charge with a non original charger or a USB port. In this case the current is limited to below 500mA to stay within the standard limits.
Regards
Achim

general1977 said:
That is not correct.
With the stock kernel the tab will only (!) charge with the original charger, unless a special adaptor is used. When connecting a non original charger or connecting the tab to a computer USB port, the battery symbol is Xed-out and the tablet doesn't charge. With the adaptor, that fools the tab into thinking an original charger is used, the tab will draw up to 2 Amps.
With the modified kernels the tab will also charge with a non original charger or a USB port. In this case the current is limited to below 500mA to stay within the standard limits.
Regards
Achim
Click to expand...
Click to collapse
I've long time with mod kernel A1, I remember with stock kernel the symbol X you refer, but even I can not check it with current widget, I am almost 99% sure that really the tab is manteining the battery charge, what means about that 450mA, but maybe you are right and it is 0mA.
Both with connector (i've got one) and with the samsung charger, the current never will get 2A, because it is the maxime value form the charger, so because security standards the demand will be less than 2A. I checked it with current widget, it is 1,5A.
With mod kernels, it will depend of the modification and the kernel... I help AAccount to mod A1 kernel (which I am using) with this current issue, and we set it to allow charging at max current (1,5A), so the user should be care of the charger to be at least 1,5 or 2A max. If you plug it on a pc usb, three situations could happen: burn the power source if it has not a current limit system; automatically cut the supply to 0A; or automatically limit the current to 450 or 500mA if the pc power supply has this function.
Regards,
Enviado desde mi GT-P7510 usando Tapatalk 2

Um, how about the charger that came with your Tab? If you broke it you can order a replacement from Samsung or find them on Amazon.

BretonGirl said:
Um, how about the charger that came with your Tab? If you broke it you can order a replacement from Samsung or find them on Amazon.
Click to expand...
Click to collapse
Yes, you're right, but some times you go camping and you need to charge the tab using a 2A usb car charger bought on Amazon, or using your laptop usb port...
Enviado desde mi GT-P7510 usando Tapatalk 2

jaswinky said:
Both with connector (i've got one) and with the samsung charger, the current never will get 2A, because it is the maxime value form the charger, so because security standards the demand will be less than 2A. I checked it with current widget, it is 1,5A.
Click to expand...
Click to collapse
Do you take that reading from the current widget logs, or do you read it off the screen when it's on? If you read it off the screen you're missing the 500mA of the running tablet.
Regards
Achim

general1977 said:
Do you take that reading from the current widget logs, or do you read it off the screen when it's on? If you read it off the screen you're missing the 500mA of the running tablet.
Regards
Achim
Click to expand...
Click to collapse
Of course, from the logs and watching several values (helped by graph after measurements), with the screen off, and measuring both draining with charging connector and without charging. Measuring with screen off and no charging for some seconds you get the standby consumption (negative value, aprox. -450mA); the real charging current from charger is the diffeence between that measure and the measurement with screen off and charger connected (about +1050mA, so the difference, the charger current, is about 1500mA). I made several tests to check it. All this, of course, with A1 kernel.
Regards,
Enviado desde mi GT-P7510 usando Tapatalk 2

ajac said:
Whats the recommend charger for the galaxy tab 10.1? My asus uses a 15v plug and I've noticed the plug on my galaxy tab is a 10.1 so wondering what is a recommended charger for the galaxy tab 10,1 is.
Click to expand...
Click to collapse
I'm useing the plug from expansys . ch
Advantage: I can switch on the cable between sync and charge - all from a standard usb-port. And in addition, I have a 12V car-to-usb charger adapter. So I can charge also while driving around.

Related

Galaxy Note without original charger

Hello to everyone!
I have one simple question: do I risk something if I charge the Note with another charger than the original one?
I don-t know, but I think no.
I charged many time my note with htc charger and gs2 charger.
Ciao
peslap said:
Hello to everyone!
I have one simple question: do I risk something if I charge the Note with another charger than the original one?
Click to expand...
Click to collapse
I almosr never use the original charger. I use the charger that came with the bluetooth headset and everything is fine
It doesn't matter what kind of charger you have. The only thing you must look at is the voltage of the source (5V DC) and it must be a micro usb plug
peslap said:
Hello to everyone!
I have one simple question: do I risk something if I charge the Note with another charger than the original one?
Click to expand...
Click to collapse
im using my old htc hd2 charger as the samsung one seems to have packed up and isnt charging properly
The easiest way to charge your Note is of course via a USB>Micro USB cord plugged into a laptop or PC (where you are guaranteed the voltage is correct), however if you are using a generic or knock off wall wart charger than provides a micro USB connector there is some small chance that it will not charge your Note.. look for the charging icon and if its not charging, toss the charger and get another.
There is no specific risk to the device, provided that it (the charger) has a micro-usb intended for charging generic devices..its just that some modern portable devices have a stricter requirement (tighter tolerance) for charging voltage and simply will not charge outside that voltage range.. my BB9930 does exactly this..
peslap said:
Hello to everyone!
I have one simple question: do I risk something if I charge the Note with another charger than the original one?
Click to expand...
Click to collapse
Richy99 said:
im using my old htc hd2 charger as the samsung one seems to have packed up and isnt charging properly
Click to expand...
Click to collapse
I'm using an hd2 charger without problems
Inviato dal mio GT-N7000 usando Tapatalk
Since all micro/mini usb chargers have the same voltage, and vary only in the power output - the only problem you could face is slow charging, or no charging at all if the charger doesn't have enough juice. But it certainly won't harm the phone.
I'm using my old Nokia N900 charger without problems
I'm using an old HTC mains-to-USB and a Nokia microUSB cable...
My stock charger has a slight squeal, so I usually use the charger for my BB Curve 9300. Does totally fine.
My Note was purchased from expansys UK but shipped in from mainland Europe. As it was to be sold in the UK, expansys had to supply a UK adapter rather than an EU one ...I received an HTC adapter with my phone. At first, I was worried, but discovered that it works beautifully with my Note. Charges faster than generic Samsung chargers too! You should be fine using another standard charger
Sent from my HTC Flyer P512 using xda premium
For the first 3 weeks I was using a blackberry (original) Bold II charger.
I noticed charge time was too long. And maybe even battery life was shorter.
Im not 100% sure about the second statement but the first is confirmed.
When I started using the Note charger it was faster. Not super fast compared to iPhone or iPad but faster than using the Bold charger.
I never use my samy charger..Im using my DHD charger..no problem at all..
Sent from my GT-N7000 using XDA
Tested three microusb from my "old" htc hd2, two original nokia microusb, and a sony ericsson original microusb.
HTC and Nokia dont work. Can't charge and no data connection.... I only can charge and data connect with the samsung and the sony ericsson microusb cables. I cant understand!!!
(the nokia cable also cant work with hd2!!)
microusb is an standard???
HTC minijack stereo earphone dont work with samsung, also dont work the nokia earphone...
minijack stereo is an standard???
Regards.
peslap said:
Hello to everyone!
I have one simple question: do I risk something if I charge the Note with another charger than the original one?
Click to expand...
Click to collapse
Most modern USB chargers should be fine (I use my old iPhone charger for the Note, for example.) Watch the power output though - some tablet chargers are rated at 2A+ and that could overdrive your charging circuit and cause damage. If you make sure your charger is about 1A (and 5V, obviously) then you should be fine.
peslap said:
Hello to everyone!
I have one simple question: do I risk something if I charge the Note with another charger than the original one?
Click to expand...
Click to collapse
I use a nokia charger to charge mine!
Make sure it gives you 1A of output and you are fine!
emuX said:
Most modern USB chargers should be fine (I use my old iPhone charger for the Note, for example.) Watch the power output though - some tablet chargers are rated at 2A+ and that could overdrive your charging circuit and cause damage. If you make sure your charger is about 1A (and 5V, obviously) then you should be fine.
Click to expand...
Click to collapse
Well emuX said it all!
1A of output and 5V and you are fine!
Actually the charging current is limited by internal resistance of the battery, so the battery effectively "accepts" charge. Charging current is not "pushed" in by the charger...
obviously a charger from say a BB is likely to be current limited and so longer charging times would be expected, but an iPad charger will work fine.
emuX said:
Most modern USB chargers should be fine (I use my old iPhone charger for the Note, for example.) Watch the power output though - some tablet chargers are rated at 2A+ and that could overdrive your charging circuit and cause damage. If you make sure your charger is about 1A (and 5V, obviously) then you should be fine.
Click to expand...
Click to collapse
I am even using a charger meant for my old HTC hehe, powerful enough adapter
Sent from my Galaxy Nexus using xda premium
I wouldnt worry too much, I charge my note with my iPhone charger purely because the USB port faces a different way so I can actually fit it on my plug extensions without loseing 2 sockets.
Pretty much anything with an output of 5Vdc and a minimum of 1A will do just fine.

Charging the Tf300 (only charges through original charger?)

I've been playing with my Tf300 for a week now.
This weekend I wasn't home and wanted to charge it. It didn't work.
I tried four different chargers including an iPad one, two Griffins, one belkin with no luck.
I have the original cable and two generic ones I bought from Amazon.
All cables work with the original charger... But NONE (even the original one) works with other chargers.
Any ideas if this is wrong?
I would hate to buy a new charger instead of only taking with me any cable with any of the other chargers I own.
Anyone with the same experience? Why is only the original charger working?
Noticed the same thing.
Sent from my ASUS Transformer Pad TF300T using xda premium
Noticed that with the car chargers as well
Sent from my ASUS Transformer Pad TF300T using xda premium
Forgot to mention that I also tried with two car chargers (Kensington and Griffin) with no luck
I'm no electronics expert but I noticed that on my Phone charger (Xperia Mini Pro) it says 850mA, but on the tablet's charger it says 2A. I think that other chargers dont pack enough punch to charge the tablet.
I used an iPad charger with no luck... The car chargers I used all have worked with my iPad.
Anyway, it seems that it's not only mine then.
Now I wonder if there's a work around for this... Besides buying a new original charger
Damn chargers are $30
Sent from my SGH-T989 using XDA
you can charge your device with a "not compatible" charger if the tablet is turned off. for me it worked with the charger of my galaxy nexus but it charges really slow
FallinHigh said:
you can charge your device with a "not compatible" charger if the tablet is turned off. for me it worked with the charger of my galaxy nexus but it charges really slow
Click to expand...
Click to collapse
Thats good to know
Sent from my SGH-T989 using XDA
I read other articles about charging TF300T. For normal charging the charger must have output at least 11v (12v is usual) and 1.5A (18Watts). Its own charger has 15v 1.2A (18Watts).
iPad charger out only 5v 2.1A. TF300 could be charged with iPad charger but the screen must be off (and it will be very slow, overnight for an 1-2 hr normal charge). So check your charger output voltage and amperage. Thank you.
But doesn't have the charger of the TF300T 5V/2A?
I noticed it on my car charger, but it only has 5V/1A. So the tablet does nothing, even when it is turned off.
It only charges with the original charger.
But I assume other chargers with at least 2A should work without any problems, right?
Jake2kOne said:
But doesn't have the charger of the TF300T 5V/2A?
I noticed it on my car charger, but it only has 5V/1A. So the tablet does nothing, even when it is turned off.
It only charges with the original charger.
But I assume other chargers with at least 2A should work without any problems, right?
Click to expand...
Click to collapse
The tf300 charger is not 5V, its either 12V or 15 V (can't remember which). This is why you see nothing. if the only difference was the current (1A Vs 2A) You would still get a charging notification, it would just take longer. The difference in voltage means It should not be able to charge at all off of a normal usb connection.
http://www.ebay.com/itm/US-POWER-AD...?pt=US_Tablet_Accessories&hash=item4d00ab2fac
Saw that guy on ebay for $13. Think it would work?
TXKSSnapper said:
The tf300 charger is not 5V, its either 12V or 15 V (can't remember which). This is why you see nothing. if the only difference was the current (1A Vs 2A) You would still get a charging notification, it would just take longer. The difference in voltage means It should not be able to charge at all off of a normal usb connection.
Click to expand...
Click to collapse
the tablet gets charged on a normal usb port it just doesnt tell you its being charged and it take quite a while to fully charge up
BierLiebHaber said:
the tablet gets charged on a normal usb port it just doesnt tell you its being charged and it take quite a while to fully charge up
Click to expand...
Click to collapse
I haven't seen it charge any when i've plugged it in to my computer via usb. but it could be that I don't have the patience to wait long enough.
---------- Post added at 01:07 PM ---------- Previous post was at 01:05 PM ----------
xAshxMoneyx said:
http://www.ebay.com/itm/US-POWER-AD...?pt=US_Tablet_Accessories&hash=item4d00ab2fac
Saw that guy on ebay for $13. Think it would work?
Click to expand...
Click to collapse
yes, but it will be slower than with the charger it came with. that charger only has a 1.2A output as compared to the 2A of the stock charger.
the tablet gets charged on a normal usb port it just doesnt tell you its being charged and it take quite a while to fully charge up
....
I haven't seen it charge any when i've plugged it in to my computer via usb. but it could be that I don't have the patience to wait long enough.
Click to expand...
Click to collapse
Everywhere I read, people have said that it does not trickle charge at all via usb. Can someone confirm this?
Okay, I can confirm that the TF300T charges at 15V/1.2A.
Both, the tablet and the dock uses 15V. None uses 5V.
I was confused because it's USB. For this purpose it can transform to 5V/2A. But this is not for the tablet.
So I think it's not possible to charge it on a normal USB port.
Has anyone tried using a USB extension cable? I tried one on my Tf300 and it wouldn't charge, no matter what the table arrangement was. It would only charge off its own charger and with only its own USB cable in the USB charger.
At a guess, i'd expect it's because the ASUS charger outputs 15V so the charger or cable will be wired differently to a normal USB lead in order to prevent blowing normal USB devices if you connected them.
USB 3
I can't remember where, but I read that this needs to use USB3 cable. Sorry if this is not the case.

Charge S4 with 12w iPad charger

I'm using a new iPad charger, the 12w version.
It's rated as a 5.2v 2.4a adapter. This is actually more than the s4 adapter which comes in the box which is rated 5.0v 2.0a.
The stock adapter charges the phone whilst I'm using it no problem yet the iPad charger says its charging but only seems actually increase my % when the screen is off. I don't understand this. Same cables so its not that.
The apple charger has pins 2 and 3 configured differently than the Samsung charger.
The phone will therefore not go into fast charge mode
You would need to properly modify a usb cable to get the phone to start fast charging using the apple charger.
http://forum.xda-developers.com/showthread.php?t=1384253
Sent from my GT-I9500
Thanks. Is there an app to monitor real time current stats or voltages being received?
Sent from my GT-I9505 using Tapatalk 2
Yeah theres an app called Galaxy Charging Current
That app doesnt work on this phone...
Sent from my GT-I9505 using Tapatalk 2
? Works on my i9505.
I get a constant reading of 460

S4 comes with 2A charger while S3 with 1A charger, can I interchange?

Hello,
Just noticed that S4 comes with 2A charger while S3 come with 1A charger. I have place where I charge a bunch of different devices in the house which has micro-USB port and all of them are using 1A. I'm wondering what repricussions I can have if I add 2A charger to the mix and will charge old devices with 2A charger and vice a versa charge S4 with 1A?
artisticcheese said:
Hello,
Just noticed that S4 comes with 2A charger while S3 come with 1A charger. I have place where I charge a bunch of different devices in the house which has micro-USB port and all of them are using 1A. I'm wondering what repricussions I can have if I add 2A charger to the mix and will charge old devices with 2A charger and vice a versa charge S4 with 1A?
Click to expand...
Click to collapse
It will be fine, I charge all my devices from my ipad 3 10W/2A @5V wall charger. Bringing one charger while travelling reduces the clutter I have to pack.
Basically if your devices are working properly, they will only pull the power they need to charge. The S4's 2A charger is capable of supplying up to 2A's but is fine supplying less if the device your charging uses less.
The actuall charging circuitry that controls the battery charging is in the phone or device, not the wall unit. The wall unit is simply the power supply.
As acruxksa mentioned, you'll be fine since the device is in control of how much power it pulls from the charger (as long as it is working properly, that is). The only thing that you may notice is when you are charging the Galaxy S4 with the older 1.0A charger it may charge slower.
Have a great day.
krsskenn said:
As acruxksa mentioned, you'll be fine since the device is in control of how much power it pulls from the charger (as long as it is working properly, that is). The only thing that you may notice is when you are charging the Galaxy S4 with the older 1.0A charger it may charge slower.
Have a great day.
Click to expand...
Click to collapse
And if in doubt, look at it this way; the phones will charge off a USB port on a computer - this is 500ma (0.5A) - so as long as your device will charge off a usb port, it will charge off a wall charger that supplies at least that much amperage. New iPads will not charge off USB ports, but it doesn't hurt them to plug them in.
Charging time
artisticcheese said:
Hello,
Just noticed that S4 comes with 2A charger while S3 come with 1A charger. I have place where I charge a bunch of different devices in the house which has micro-USB port and all of them are using 1A. I'm wondering what repricussions I can have if I add 2A charger to the mix and will charge old devices with 2A charger and vice a versa charge S4 with 1A?
Click to expand...
Click to collapse
Yes it does but as the previous reply said it takes longer.
I used the old s3 cable at the office charging s4 but it takes long time to get the battery % up. It usually takes my s4 from 1% to 100% within an hour and half time but with the s3 cable it takes good 3 -4 hour or so.
I wouldn't take the s3 cable for travelling though. it will take too long for me to charge in coffee shops and what not when I am moving around the destinations.
So far, I am very impressed with the charging time of S4.. Love the device.
acruxksa said:
It will be fine, I charge all my devices from my ipad 3 10W/2A @5V wall charger. Bringing one charger while travelling reduces the clutter I have to pack.
Basically if your devices are working properly, they will only pull the power they need to charge. The S4's 2A charger is capable of supplying up to 2A's but is fine supplying less if the device your charging uses less.
The actuall charging circuitry that controls the battery charging is in the phone or device, not the wall unit. The wall unit is simply the power supply.
Click to expand...
Click to collapse
I don't understand why all current control is on device itself why not manufacturers just suppl 3A chargers for all the phones since it can be used for any device out there.
alphadog00 said:
And if in doubt, look at it this way; the phones will charge off a USB port on a computer - this is 500ma (0.5A) - so as long as your device will charge off a usb port, it will charge off a wall charger that supplies at least that much amperage. New iPads will not charge off USB ports, but it doesn't hurt them to plug them in.
Click to expand...
Click to collapse
That's how I rationalized using my One S chargers
---------- Post added at 08:52 PM ---------- Previous post was at 08:43 PM ----------
artisticcheese said:
I don't understand why all current control is on device itself why not manufacturers just suppl 3A chargers for all the phones since it can be used for any device out there.
Click to expand...
Click to collapse
Good question. Maybe because the higher amp batteries have not been out that long compared to all the years smartphones have been sold. They may start making 3A only. Also, companies may sell less chargers if one size fits all. No need to buy a new one when you change phones.
I do know when I charge the S4 with my One S charger it does take longer, as mentioned, and very slow off USB. The One S charger end also gets somewhat warm charging the S4. The S4 charger does not. That would lead me to believe it is pulling a little more current than charger was designed for. But, probably not an issue. USB does not get warm. But, is a good quality one and heavily shielded.
artisticcheese said:
I don't understand why all current control is on device itself why not manufacturers just suppl 3A chargers for all the phones since it can be used for any device out there.
Click to expand...
Click to collapse
In case someone buys a 10amp cheap charger and ends up frying the phone. Thus Samsung protects it self from dummy users and from million dead phones warranty swaps.
I'm using a USB car charger that puts out 2.1amps and its super fast. USB 2.0 on my laptop takes a while to charge it. Some times I use iPhone charger with Nokia cable or with WD hard drive USB wire. They all work just fine but charge at different rate.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
artisticcheese said:
I don't understand why all current control is on device itself why not manufacturers just suppl 3A chargers for all the phones since it can be used for any device out there.
Click to expand...
Click to collapse
The bigger the charger, more expensive it is. Manufacturers want to save money.
Wow. Way to necro this thread...
Necro--
Damn, thank goodness for Urban Dictionaries for OLD farts--
Had to look that one up
so if i will charge my S3 with a 2A charger i wont see any major change from the 1A, correct? I have the Boeffala kernel and at the AC charge is set to 1,1A so if i have a 2A charger i guess it should charge faster.
The phone will only draw the maximum it can. The 2A charger will charge it at the same speed as the 1A charger.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Red_81 said:
The phone will only draw the maximum it can. The 2A charger will charge it at the same speed as the 1A charger.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Maybe it is a placebo effect, but when I charge my S3 with my S4's charger it does seem faster. Quite a few of my coworkers that have used my S4 charger at work also thought it charged faster.
Either way I have charged my S3 with it very often with no I'll effects, so OP you should be safe to do so.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
Install battery monitor widget and you will be able to see how much it's pulling on each charger
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

[Q] Note 4 Car Charging?

Hey guys,
I just plugged my note 4 into my car charger (anker charger, oem note 4 cable) and couldn't get it to charge. It charges my note 3 no problem.
I also have no problems charging my note 4 with wall chargers.
Any help?
I've got the "Anker® 18W / 3.6A Car Charger with Built-in Micro USB Cord for Android" and it's actually CHARGING my Note 4 when using GPS navigation and playing music! My Note 2 wouldn't charge, but it would hold charge under the same conditions.
What model charger are you using?
EP2008 said:
I've got the "Anker® 18W / 3.6A Car Charger with Built-in Micro USB Cord for Android" and it's actually CHARGING my Note 4 when using GPS navigation and playing music! My Note 2 wouldn't charge, but it would hold charge under the same conditions.
What model charger are you using?
Click to expand...
Click to collapse
I actually can't find it on the charger itself or even Amazon. It's relatively new, I thought it was a 2.0/2.1 amp charger (2x USB). Definitely Anker though.
clanderson said:
I actually can't find it on the charger itself or even Amazon. It's relatively new, I thought it was a 2.0/2.1 amp charger (2x USB). Definitely Anker though.
Click to expand...
Click to collapse
Are you using both usb's at the same time? If so, it's splitting the power, so you'll get a slow charge.
EP2008 said:
Are you using both usb's at the same time? If so, it's splitting the power, so you'll get a slow charge.
Click to expand...
Click to collapse
Sorry, I should have specified - the only thing plugged into the charger is my Note 4.
Shoot, maybe I just need to grab another charger. Thought I made a good decision with that Anker.
Thanks for your reply by the way
clanderson said:
Sorry, I should have specified - the only thing plugged into the charger is my Note 4.
Shoot, maybe I just need to grab another charger. Thought I made a good decision with that Anker.
Thanks for your reply by the way
Click to expand...
Click to collapse
If you get the one I listed, it works for sure. Great charger and it's been the only one my wife hasn't been able to destroy. :laugh:
Will the car charger also do the 50% in 30min charging ?
ilordvader said:
Will the car charger also do the 50% in 30min charging ?
Click to expand...
Click to collapse
Doubt it. You need a special charger for that.
Sent from my SM-N910U
EP2008 said:
Doubt it. You need a special charger for that.
Sent from my SM-N910U
Click to expand...
Click to collapse
Do you know if there's one available that will do that as of right now?
Costas86 said:
Do you know if there's one available that will do that as of right now?
Click to expand...
Click to collapse
No idea, but if there were to be one, I'd imagine that Samsung would have it first.
EP2008 said:
No idea, but if there were to be one, I'd imagine that Samsung would have it first.
Click to expand...
Click to collapse
Hmm.. this mentions rapid charging, I wonder if it's as fast as the wall charger
http://www.samsung.com/us/mobile/cell-phones-accessories/ECA-U21CBEBXAR
The only chargers that work with the new fast charging technology are ones that are purpose built and have the ability to switch between 9V and 5V,they are quite uncommon.
I have this charger http://www.amazon.com/gp/product/B00D82O68Y/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
and it charges my note 4 while running Waze and tethering my Radar Detector via Bluetooth (which also uses GPS)....and it charges my wife's S5 at the same time
Using an afer market 2.1a charger and an S3 cable, charges just fine.
ilordvader said:
Will the car charger also do the 50% in 30min charging ?
Click to expand...
Click to collapse
EP2008 said:
Doubt it. You need a special charger for that.
Sent from my SM-N910U
Click to expand...
Click to collapse
I believe Samsung has stated it's a 9v charger instead of the conventional 5v charger.
Did some more research and found this:
http://www.incipio.com/chargers/car-chargers/quick-charge-2-0-single-port-usb-charger.html#
From the Engadget review, "I clarified with Samsung that it chose a proprietary solution instead of licensing Qualcomm's QuickCharge tech, but it insisted that you could still use QuickCharge 2.0-compatible chargers to achieve the same results."
Also from http://www.samsung.com/sa_en/support/skp/faq/1063730?CID=AFL-hq-mul-0813-11000170
[FAQs] Smart Phone : Galaxy Note 4- To use fast charging, what kind of charger should be used?
Fast charging uses battery charging technology that charges the
battery faster by increasing the charging power. The Galaxy Note 4
device supports Samsung’s Adaptive Fast Charging feature and
Qualcomm Quick Charge 2.0.
To use Fast charging on your device, connect it to a battery charger
that supports Adaptive Fast Charging or Quick Charge 2.0.
Hope that helps someone, credit goes to the users over at http://forums.androidcentral.com/sa...-charger-supports-fast-charging-note-4-a.html

Categories

Resources