Database Users

[NIGHTLY][ROM] CyanogenMod 7 for Samsung Captivate (captivatemtd)

This thread is reserved for nightly builds of CyanogenMod Rom for Samsung Captivate.
All Samsung Roms run on top of BML/RFS, CyanogenMod 7 does NOT.
It runs on MTD/yaffs2 (like Nexus One) which means you'll not able to flash just any kernel or run just any other filesystem you want. Use it as it is if possible, otherwise confirm with the kernel developer that you are trying to install whether it would work with CM. We do not support other kernels and know nothing about their capabilities or compatibility. Only the data partition, which is on movinand, is ext4 like on speedmod or voodoo ("lagfix"). No "lagfix" is necessary because this does not use any Samsung proprietary file systems.
CyanogenMod is a free, community built distribution of Android 2.3 (Gingerbread) which greatly extends the capabilities of your phone.
Code:
** These CyanogenMod builds are highly experimental and unsupported.
**
** Please refrain from submitting bug reports for any issues
** you may encounter while running one of these builds.
**
** Submitting bug reports on nightly builds is the leading
** cause of male impotence.
What are Nightly builds? Auto compiled build of the latest CyanogenMod source from github. This version changes each night and aren't officially supported.
If you find bugs/issues you can/must discuss here (do not submit nightlies bugs on CyanogenMod issue tracker).
Warning : Not for new users, flash this build only if you know what you are doing !!! Make SURE you can get into Download mode using only buttons (no other method, Download mode from just buttons is essential).
INSTRUCTIONS:
Latest version: http://download.cyanogenmod.com/?device=captivatemtd
Check the md5sum if you want to be sure that the download worked (different OSes have different programs that do md5, on ubuntu it is md5sum that you run against the zip you download and compare to the md5sum number shown on the download website). ROMManager does this automatically for ROMs you download via ROMManager.
- First time flashing CM 7 to your Captivate (or coming from another ROM)?
Easy way:
Start with a rooted Eclair/Froyo running Eclair/Froyo Bootloaders (do not ask us how to do this).
Install ROMManager Premium.
Flash ClockworkMod Recovery. Pick Captivate (MTD) (ignore the warning about not having an official, pick ClockworkMod 2.x).
Make sure you can reboot into ClockworkMod recovery from ROMManager. Reboot and get back into ROMManager Premium.
Choose download ROMs.
Pick the CyanogenMod Nightlies.
Check the Google Apps addon.
Check Backup current ROM!
Check wipe data, cache, dalvik cache.
Let ROMManager finish the installation.
Harder way:
Make sure you're running a Eclair/Froyo Firmware (2.1 or 2.2) and Eclair/Froyo Bootloaders!
Root your device and install ClockworkMod Recovery.
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon (through ROMManager is easiest)
- Upgrading from earlier CM7?
ROM Manager method:
Install ROMManager Premium.
Flash ClockworkMod Recovery. Pick Captivate (MTD) (ignore the warning about not having an official, pick ClockworkMod 3.x).
Choose Download ROMs.
Pick the CyanogenMod Nightlies.
Check the Google Apps addon.
Check Backup current ROM!
Check wipe cache, dalvik cache.
Let ROMManager finish the installation.
Clockwork Mod method:
Download and push the ROM zip file to the sdcard.
Reboot into recovery.
Do a Nandroid Backup!
Install the ROM zip from sdcard (your Google apps will be backed up automatically)
There are no Google Apps bundled with CM ROMs, because Google asked Cyanogen to remove copyrighted apps. After flashing the rom, don't forget to flash Google Addon package if you want it. ROM Manager will allow you to flash it if you just go into it and after flashing the ClockworkMod recovery for MTD devices, choose Download ROMs, and pick Google Apps.
Additional Information:
Maintainers:
atin - http://twitter.com/atinm
codeworkx - http://twitter.com/codeworkx
coolya - http://twitter.com/dumdidum
guiperpt - http://twitter.com/guiperpt
unhelpful - http://twitter.com/unhelpfulone
Irc:
Host: irc.freenode.net:6667
Channels: #cyanogenmod, #cyanogenmod-dev, #cmsgs
Changelog:
Generic Changelog CMSRC Twitter
Device specific Changelog by igor.tonky
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy![/QUOTE]

SWEET thanks! Gonna try this out and test it.
Sent from my GT-I9000 using XDA App

Oh snap!
di11i 6.0 w/ Suckerpunch #53
Underclocked to 600mhz
Undervolted to -100mV

Very nice! definitely going to flash it
Is camera working fine now?

Wow
Wow you mean I can actually use Gingerbread on my cappy. I was getting bored of playing with ginger on my HTC dream which is slowwwwer then slow.
Thanks to every dev working on this.

atinm said:
your kitties, doggies and maybe even goldfish are no longer safe.
Click to expand...
Click to collapse
hahaha!
That is the funneyest thing i have herd.

Just want to make sure my understanding is correct
- Don't use "reboot recovery" command or other shiny things to do this!
Flash cm7-captivate-initial-kernel.tar as pda using odin without auto-reboot
So after flash of efs pull battery, get to dl mode, flash initial kernel with auto reboot off. Pull bay after flash go back to recovery?
Do a wipe
Factory restore in clockwork?
Install the Nexus S USB-Drivers from SDK-Manager if you're using windows.
Are these drivers needed to use odin our just files transfers
To revert to a samsung rom, simply use odin with repartition option enabled.
Does odin one click qualify here or use full version?
Just making sure I understand instructions fully, thanks

thx for your hard work man

DAGr8 said:
thx for your hard work man
Click to expand...
Click to collapse
Can't wait to see what you do with this.

Thank you very much but because this is a test release, I will keep my eye very close to see how everyone else does on this ROM. Actually, I'm scared to flash this until it's stable enough for a daily driver .

Can I reserve a post this late? Lol
Sent from my Captivate using XDA App

CM7 getting awfully close!

mcord11758 said:
So after flash of efs pull battery, get to dl mode, flash initial kernel with auto reboot off. Pull bay after flash go back to recovery?
Click to expand...
Click to collapse
No, please read the instructions fifty-thousand times before you do anything. It clearly says to use the three button combo to reboot, directly underneath that. If you do a battery pull while in Download mode, you risk destroying your phone.
mcord11758 said:
Factory restore in clockwork?
Click to expand...
Click to collapse
Yes.
mcord11758 said:
Are these drivers needed to use odin our just files transfers
Click to expand...
Click to collapse
These are drivers to use your phone (incorrect, but avoiding the question). Just install the drivers, because the instructions say so. If you don't, you can't plug your phone into your computer.
mcord11758 said:
Does odin one click qualify here or use full version?
Click to expand...
Click to collapse
Odin One Click. Or Odin3. It doesn't matter. Just reboot into Download mode using the button combo and use Odin.

I must be dumb but, There is no efs-backup for initial kernel to even download, Or I'm unable to find it. On that page, all I see is Initial package, update, and google-addon. No kernel, no efs package.
EDIT: k. I just fail. It was inside the initial package. .-.

Thank you for the response. The initial kernel to be flashed via odin is the z image inside the initial package?

This is why I love Android and XDA! Sweet! Even before Samsung releases it to the I9000 (granted it's still under development).

Are the modem links dead for anyone else?

Yeah I have no idea where the "initial kernel" is. It's not ANYWHERE on the site, nor in the initial package.

Konner920 said:
Yeah I have no idea where the "initial kernel" is. It's not ANYWHERE on the site, nor in the initial package.
Click to expand...
Click to collapse
Yeah, couldn't find that either.

Great job guys. I want to try this as I will flash almost anything once. I will give it some thought. I feel I am one step above noob. Any noobs out there might want to wait some more. Then again if you are a flasher...
Awesome work/progress.
Edit: I made the plunge. Worth every minute.

I am from egypt and need help

Hi all i realy need help I am from egypt and it is shown that the program iconia recovery installer isnot working in my country so what i can do to flash my device and install a cooked room
i need this to can use a 3g modem with it
help me please

I need help please

What does your being in Egypt have to do with Acer Recovery not working? The only thing that could stop it is whatever ROM you're currently on. What's your current ROM version?

thank you alot for answering me
my versoin
android version : 3.1
kernel version 2.6.36.3
build number acer_a500_4.010.13_com_gen2
kindly help me step by step to install a room that support 3g modem and arabic language

bassem100 said:
thank you alot for answering me
my versoin
android version : 3.1
kernel version 2.6.36.3
build number acer_a500_4.010.13_com_gen2
kindly help me step by step to install a room that support 3g modem and arabic language
Click to expand...
Click to collapse
Step 1. Go to the developer section
Step 2. Read the stickies
Step 3. Select a ROM that suits your needs
Step 4. Follow the instructions found in the stickies for rooting, installing CWM, and flashing a custom ROM carefully
Finally. Do not install the 3.2 FOTA update if you want to root. You will not be able to root or install a custom ROM if you do.

i read the sticks several time but i cant manage to flash my iconia the problem appears to me with the program "iconia recovery installer" when I download it and transfare it to the tablet the install buttom was not shown

So you are not rooted yet, find iconiaroot 1.3 I think is the latest one and root your tablet, install acer recovery, then flash your rom make sure you do backup before flashing rom, hope this helps.
Sent from my SPH-D700 using XDA App

i downloaded this version. And. Root. It as you say and it said to me that it is successfully. Rooted but still the same with Acer recovery installer

Install RootCheck and verify you have Root.

That's write get the rootcheck from market that will guide you to install busybox you probably missing.
Sent from my SPH-D700 using XDA App

i installed busybox installer
and it give me this message
your device is rooted
busybox location :/system/bin/
busybox version: v119o gitadrynalyne
phone model: a500
rom versin: acer_a50040100lcom_gen2
and the same thing with acer recovery installer
could you give me a link for that program may be my version is the problem idont know what to do

still need help brothers

Still waiting for you to install RootCheck and tell us the results...
It's on the market.

thank you a lot
finally i did it the problem was from the file "acer recovery installer i was using when i download it again from another source everything goes as it should be and now i am happy with usb 3g working on my tablet

[Q] cant install android 4.4 on my defy plus

Hi,
My phone detail --
MB526, have android 4.1.2 and have rom -CM-X MIG 2.02
I have two issues :-
1. my wifi disconnects after some time and i have to disable it for long time and then enable it to work ,so any way to solve it -on my other phone
there is no issue about wifi atall.
2.I been trying to install kitkat 4.4 on my defy plus but always fails to do in recovery with message like this:--
error in /sdcard/.....zip, installation aborted"
tried both recoveries but now on touch TWRP -- any idea ?
Thanks

vaibhavm said:
Hi,
My phone detail --
MB526, have android 4.1.2 and have rom -CM-X MIG 2.02
I have two issues :-
1. my wifi disconnects after some time and i have to disable it for long time and then enable it to work ,so any way to solve it -on my other phone
there is no issue about wifi atall.
2.I been trying to install kitkat 4.4 on my defy plus but always fails to do in recovery with message like this:--
error in /sdcard/.....zip, installation aborted"
tried both recoveries but now on touch TWRP -- any idea ?
Thanks
Click to expand...
Click to collapse
I tooo faced the same problem at the beginning with cm11 (cm-11-20140117-NIGHTLY-mb526) by quarx, though I was able to install cm11(cm-11-20131229-NIGHTLY-mb526) by quarx successfully.... Im a noob to this flashing stuff still managed and understood a bit of this procedure... I believe I read this some where on this forum that if you want to install ***cm11 (cm-11-20140117-NIGHTLY-mb526)*** then you need to go back to the custom rom first then from there you can install , though I'm not 100% Sure and afraid to do any experimentation with my Defy+.... As of now Im on
"Android 4.3.1"
Kernel 2.6.32.9-Aerokernel
10.2-20131030-NIGHTLY-mb526
I am facing almost the same problems as yours "Installation failed" as if there is a problem with the zip file which I'm sure of that isnt the case :/
Please somebody help the noobs...!!!
Thank you.

imdroid87 said:
I tooo faced the same problem at the beginning with cm11 (cm-11-20140117-NIGHTLY-mb526) by quarx, though I was able to install cm11(cm-11-20131229-NIGHTLY-mb526) by quarx successfully....
Thank you.
Click to expand...
Click to collapse
Did you update recovery?
Link for that is in OP of http://forum.xda-developers.com/showthread.php?t=2515036

becer said:
Did you update recovery?
Link for that is in OP of http://forum.xda-developers.com/showthread.php?t=2515036
Click to expand...
Click to collapse
Yes I did the recovery Update and then rebooted and then tried installing cm11 (cm-11-20140117-NIGHTLY-mb526) but unfortunately it failed "Aborted"

imdroid87 said:
Yes I did the recovery Update and then rebooted and then tried installing cm11 (cm-11-20140117-NIGHTLY-mb526) but unfortunately it failed "Aborted"
Click to expand...
Click to collapse
Try maybe installing from scratch (starting with original sbf).
I reinstalled Kitkat on my Defy+ tonight - sbf, rooted sbf, 2ndInit, cm-10-20131030, recovery update and then 140120.

becer said:
Try maybe installing from scratch (starting with original sbf).
I reinstalled Kitkat on my Defy+ tonight - sbf, rooted sbf, 2ndInit, cm-10-20131030, recovery update and then 140120.
Click to expand...
Click to collapse
Buddy "becer" can u please guide me step wise to go back to the Stock Rom then 2init what ever it is I dont understand a thing
I know what stock Rom is but don't know how to degrade to the stock rom from 4.3.1 and how to install this 2init thing
would be a great help if you could guide me through the procedure step wise
Thank You.

1. root with Framaroot http://forum.xda-developers.com/showthread.php?p=37508806
2. Install 2nd init http://forum.xda-developers.com/showthread.php?p=12837303
3. Update recovery with this http://forum.xda-developers.com/showthread.php?p=48501247
4. Install CM11
Sent from my MB526 using Tapatalk

cyrusct82 said:
1. root with Framaroot http://forum.xda-developers.com/showthread.php?p=37508806
2. Install 2nd init http://forum.xda-developers.com/showthread.php?p=12837303
3. Update recovery with this http://forum.xda-developers.com/showthread.php?p=48501247
4. Install CM11
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
Buddy Im already running cyanogenmod on my defy+ and in the second link what you gave for installing the 2ndinit Recovery it says:
DO NOT INSTALL THIS IF ARE YOU ALREADY RUNNING CYANOGENMOD. That ROM already has bootmenu pre-installed, and you'll probably end up having to flash an SBF file to recover your phone.
NOTE: You need ROOT installed on your Defy to use this application.
What should I do ???

I will try from start by using original sbf file using RSD and then CM11 and updating recovery after that Kitkat ,btw can you mention which ROM you tried because i tried these 2 earlier --> omni-4.4.2-20140117-mb526-HOMEMADE .zip and AOSPA 4.0+ PARANOIDANDROID [beta]
Kitkat 4.4.2 KOT49H android-4.4.2_r1.
Also can some1 help me with my wifi frequently disconnection problem too please .

vaibhavm said:
I will try from start by using original sbf file using RSD and then CM11 and updating recovery after that Kitkat ,btw can you mention which ROM you tried because i tried these 2 earlier --> omni-4.4.2-20140117-mb526-HOMEMADE .zip and AOSPA 4.0+ PARANOIDANDROID [beta]
Kitkat 4.4.2 KOT49H android-4.4.2_r1.
Also can some1 help me with my wifi frequently disconnection problem too please .
Click to expand...
Click to collapse
I tried this
Mokee
"MK43.1-jordanplus-201312040138-NIGHTLY"
with Gapps
gapps-jb+-20130730_defy-minimal
and
update-recovery
CM11 by Quarx
"cm-11-20131229-NIGHTLY-mb526"
with Gapps
1-16_GApps_Standard_4.4.2_signed
They both worked for me but unable to install the latest one.... I'm trying the method just mentioned by the senior member but unable to root again using framaroot as its showing me this error
"Half-Success :-/ ... system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it run as root"
I don't know what to do now :silly:

imdroid87 said:
I tried this
Mokee
"MK43.1-jordanplus-201312040138-NIGHTLY"
with Gapps
gapps-jb+-20130730_defy-minimal
and
update-recovery
CM11 by Quarx
"cm-11-20131229-NIGHTLY-mb526"
with Gapps
1-16_GApps_Standard_4.4.2_signed
They both worked for me but unable to install the latest one.... I'm trying the method just mentioned by the senior member but unable to root again using framaroot as its showing me this error
"Half-Success :-/ ... system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it run as root"
I don't know what to do now :silly:
Click to expand...
Click to collapse
Mine sbf is rooted alredy so maybe try it first then go to CM10 .
its DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.rar
downloaded it earlier from here only.

I have tried Mokee, but direct return to Quarx compilation made big stability problems too. Solution was to flash with original rom, then rooted one, 2ndInint and Quarx cm10, then cm11.
As I had Android 2.3.6 (3.4.5.1 - 231), I used these roms - http://forum.xda-developers.com/showthread.php?t=1542956.
It is very important to wipe data and cache just after first, original flash - otherwise you will have infinite boot loop and cannot run phone.
Look at http://forum.xda-developers.com/showthread.php?t=966537 too.

becer said:
I have tried Mokee, but direct return to Quarx compilation made big stability problems too. Solution was to flash with original rom, then rooted one, 2ndInint and Quarx cm10, then cm11.
As I had Android 2.3.6 (3.4.5.1 - 231), I used these roms - http://forum.xda-developers.com/showthread.php?t=1542956.
It is very important to wipe data and cache just after first, original flash - otherwise you will have infinite boot loop and cannot run phone.
Look at http://forum.xda-developers.com/showthread.php?t=966537 too.
Click to expand...
Click to collapse
Im phone is f***** , what I did is install this framaroot and installed rootchecker..... I tried to do the rooting using "installsu" and then clicked Gilmo and it gave me this message:
“Half-Success :-/ … system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it runs as root”
then I restarted my phone and check with root checker and found its saying its saying Root access successful and then I wondered which I suppose I shudnt have wondered :crying: to user framaroot and do the "unroot" and again restarted , and now after restart I tried to do the regular thing wipe cache ,Dalvik , Data and the phone is not even mounting them its sayin
E: Can't mount /cache/recovery/command etc
Im able to open the android 4.1.2 (Jb - quarx)
but not able to install a thing in my internal memory coz I messed up bad with the partition table bad:crying:
I tried to fix it through this
http://forum.xda-developers.com/showthread.php?t=1759558&highlight=status+0
but no luck :/

I been able to flash and run cm-10.2-20140120-NIGHTLY-mb526.zip thts-- android 4.3 ,so do factory reset and go here http://quarx2k.ru/roms/defy-cm10.2/ --get latest build .
my problem is only wifi disconnects frequently -seems on this working fine ,will check it for few days ,anyway 4.4 will still have bugs so better be on some lower version.

For the opening post: the first issue is a known bug in 4.4, I did not know it is wrong even in 4.1...

vaibhavm said:
I been able to flash and run cm-10.2-20140120-NIGHTLY-mb526.zip thts-- android 4.3 ,so do factory reset and go here http://quarx2k.ru/roms/defy-cm10.2/ --get latest build .
my problem is only wifi disconnects frequently -seems on this working fine ,will check it for few days ,anyway 4.4 will still have bugs so better be on some lower version.
Click to expand...
Click to collapse
Oooh in that case even if I can install the latest Cm11 by Quarx then I should not be doing it as the problem your saying about the wifi getting disconnecting frequently is not acceptable :silly:
anyways just fighting with my Defy+ as of now , Installing the Stock sbf on it as I bricked the phone
So the new Question arises what CM version is more stable or can I ask whose performance is Better in terms of speed.... As I don't mind with Features but I dont want Lags.... Previously I installed 4.2.1 I Suppose and installed the mininal gapps and was have around 240mb free of RAM...
is that good ???
Thank you for the responses buddies :fingers-crossed:

imdroid87 said:
Oooh in that case even if I can install the latest Cm11 by Quarx then I should not be doing it as the problem your saying about the wifi getting disconnecting frequently is not acceptable :silly:
anyways just fighting with my Defy+ as of now , Installing the Stock sbf on it as I bricked the phone
So the new Question arises what CM version is more stable or can I ask whose performance is Better in terms of speed.... As I don't mind with Features but I dont want Lags.... Previously I installed 4.2.1 I Suppose and installed the mininal gapps and was have around 240mb free of RAM...
is that good ???
Thank you for the responses buddies :fingers-crossed:
Click to expand...
Click to collapse
vaibhavm I have installed this 4.4.2 Android Panroid
http://forum.xda-developers.com/showthread.php?t=2576930
[AOSPA 4.4.2 KOT49H] [Beta] Defy(+) PARANOIDANDROID 4.0+ [18/01/2014]
Working awesome fast and seems stable until now and I have gone through some reviews about it on defy+ on that forum even they are giving it positive reviews..
Check it out for sure:good::fingers-crossed:

How to re-root XCover2 with CM

Hey guys,
I hope you're noob friendly here too and can help me with my phone:
I have a Xcover2 which I have already successfully rooted with an Android image.
My problem: I use link2sd to send almost all apps to my external SD card. That works fine. But after some time, my phone seems to block the FAT32 partition of the external SD card, which means I can't write or reed from the normal external storage partition anymore. After formating the partition on my PC, it works again for some time, but the problem comes back sooner or later.
Now:
A friend suggested to use CM as alternativ. Unfortunately my XCover2 is not officially supported. I found an image for CM developed of one of you here but I have no clue how to root my phone with CM. Obviously it works different than with Odin.
Can someone help me?
Sorry I just started with the topic of how to hack a phone, so I am very happy for any help!

Ahnungslos said:
Hey guys,
I hope you're noob friendly here too and can help me with my phone:
I have a Xcover2 which I have already successfully rooted with an Android image.
My problem: I use link2sd to send almost all apps to my external SD card. That works fine. But after some time, my phone seems to block the FAT32 partition of the external SD card, which means I can't write or reed from the normal external storage partition anymore. After formating the partition on my PC, it works again for some time, but the problem comes back sooner or later.
Now:
A friend suggested to use CM as alternativ. Unfortunately my XCover2 is not officially supported. I found an image for CM developed of one of you here but I have no clue how to root my phone with CM. Obviously it works different than with Odin.
Can someone help me?
Sorry I just started with the topic of how to hack a phone, so I am very happy for any help!
Click to expand...
Click to collapse
Actually not, I root my device with the same root.zip on any ROM (custom/stock). Anyway, Cyanogenmod comes rooted. Just Install SuperSU from playstore https://play.google.com/store/apps/details?id=eu.chainfire.supersu
Sent from my GT-I8190 using Tapatalk

Hey Carlyle,
thanks for the reply. Unfortunately I still don't know, how to use the CM image that one of your developers has uploaded. For my first root I could used a tar.md5-file. The zip-file for CM is a lot more complexe. So now I have no idea how to use it. You see I'm really just starting.

Ahnungslos said:
Hey Carlyle,
thanks for the reply. Unfortunately I still don't know, how to use the CM image that one of your developers has uploaded. For my first root I could used a tar.md5-file. The zip-file for CM is a lot more complexe. So now I have no idea how to use it. You see I'm really just starting.
Click to expand...
Click to collapse
Oh, do you mean you don't know how to flash CM? Is your phone still on stock firmware?
Sent from my GT-I8190 using Tapatalk

Hey,
no as I said, it is already running on a rooted Android Version (4.1.2). The XCover 2 is not officially supported by Cynogenmod.com

Ahnungslos said:
Hey,
no as I said, it is already running on a rooted Android Version (4.1.2). The XCover 2 is not officially supported by Cynogenmod.com
Click to expand...
Click to collapse
Can you go to settings > about device and take a screenshot, then post it here please?
Sent from my GT-I8190 using Tapatalk

I just send you the data (my connection is quite bad at the moment):
Model:
GT-S7710
Android-Version:
4.1.2
Basic band version:
S7710XXAMB6
Kernel-version:
3.0.31 - 963581
[email protected] #2
SMP PREEMPT Mon Feb 25 15:45:39
KST 2013
Buildnumber
JZO54K.S7710XXAMB6

OK, so you're not on cyanogenmod yet. You don't need to root it, you need to flash it... This was the confusion here. Rooting is gaining administrative privileges on your device flashing is modifying/changing software through recovery, Odin or FastBoot. So, I'm guessing you still have a custom recovery from when you rooted? TWRP or CWM Recovery?
Edit: follow this guide (choose either CWM or TWRP) http://forum.xda-developers.com/showthread.php?t=2352252
Search for gapps for your device on google or here in XDA
Reboot into recovery
Select install (TWRP) or install from SD card (CWM)
Navigate to the cm .zip file you downloaded and install it
Navigate to the gapps .zip and install it
Wipe cache and factory reset
Reboot
Sent from my GT-I8190 using Tapatalk

How to update baseband without losing your data or locking bootloader

Hello everybody...
This post was created with the intention of helping those people who want to upgrade their baseband version of ZUK Z2+. There are some methods to do this, some of them could erase all your information (qfil) and some others could block bootloader (.zip).
The presented method in this post will not erase either your data or block your bootloader.
Note: when I say "data" I'm referring to images, downloads, videos, etc. This method won't erase any data located on root/sdcard.
Here are the steps for upgrading baseband:
1: Download this ROM and transfer it to you cellphone. (NOTE: It's highly recommended to download it from your PC. I downloaded it through my phone and at the time of flahing, it gave me an error; It said it was a corrupt file. So, download it through your PC.)
2: Go to TWRP and wipe system, data, cache and dalvik cache.
3: Flash the ROM and be patient.
As the aim of this post is upgrading the baseband, some of you might wonder "Is it necessary to boot up so that baseband could be updated?", I don't actually know it. When I installed this ROM at first I wasn't after a baseband upgrade, rather taste it to see how it was (btw, it's the best nougat ROM so far; my humble opinion). So, we could say that you can try not to wait till it boot up, and install your whished ROM right after the first flashed ROM. But I highly recommend you to taste this ROM.
IMPORTANT DATA: this ROM will update baseband to 1.70 version.
There is a more recent version than the one used on the steps above (I do not know whether this version is capable of upgrading baseband or not. I tried to root that version with Magisk 15.3 but unable to). Here is the ROM.
If you decided to taste this ROM you should know that the only available languages are Chinese and English, and flashing gapps' zip won't work. In order for you all to solve gapps problem do the following:
1: Download Google Installer 2.0
2: Install, open and download all fundamental data from Google Installer
3: For contacs app to work properly do the fallowing: go to settings/apps/Google Contact Sync/Permissions, grant all permissions and restart your phone.
This ROM includes some chinese apps, but those can be disabled very easily if you go to apps' window.
LongTap does not work on this ROM.
Thanks to @Not_James_Bond for providing me the GoogleDrive's link of the ROM, since the official website is weibo and it's a little bit tedious download things from there.

Reserved :v

How to enable swipe up open dockon this ROM like Oreo some days ago I did but now i cant find that option but when I installed other ROM I forgot how to do that
can u please help me ??

dawoodrangrez said:
How to enable swipe up open dockon this ROM like Oreo some days ago I did but now i cant find that option but when I installed other ROM I forgot how to do that
can u please help me ??
Click to expand...
Click to collapse
You just have to update OnePlus Launcher...

MaikelAt said:
Reserved :v
Click to expand...
Click to collapse
Please make a video showing the features, home screens, VoLte, camera etc and post it on youtube that will be greatly appreciated.
Thanks

rakeshsainixyz said:
Please make a video showing the features, home screens, VoLte, camera etc and post it on youtube that will be greatly appreciated.
Thanks
Click to expand...
Click to collapse
On YouTube there are some reviews... Like this one or others

Is there a similar rom for indian variant which updates baseband to 1.76???

MaikelAt said:
Here are the steps for upgrading baseband:
1: Download this ROM and transfer it to you cellphone. (NOTE: It's highly recommended to download it from your PC. I downloaded it through my phone and at the time of flahing, it gave me an error; It said it was a corrupt file. So, download it through your PC.)
2: Go to TWRP and wipe system, data, cache and dalvik cache.
3: Flash the ROM and be patient.
...
IMPORTANT DATA: this ROM will update baseband to 1.70 version.
...
Click to expand...
Click to collapse
OMG...
Do you seriously think that to change the baseband you need to flash a new ROM ???
It is necessary to follow closely the answers to your questions. Everything is much simpler.
https://forum.xda-developers.com/showpost.php?p=75337122&postcount=881

Nordicus said:
OMG...
Do you seriously think that to change the baseband you need to flash a new ROM ???
It is necessary to follow closely the answers to your questions. Everything is much simpler.
https://forum.xda-developers.com/showpost.php?p=75337122&postcount=881
Click to expand...
Click to collapse
Maybe you got him all wrong. It's the safest way bcz on Zukfans thread some zips lock bootloader so we have to flash unlock img right after baseband flashing. If anyone boots without flashing img he/she may lose his internal storage . So it's imp to flash unlock img before booting up the device right after updating baseband.

abhi8192 said:
Is there a similar rom for indian variant which updates baseband to 1.76???
Click to expand...
Click to collapse
I don't actually know... I'll try to find it out and let you know...