I have just bought a used E900 phone as I heard that it is running 75. or at least can be updated.
Now I have the phone here with a version 7.0.7004 on it and every thing I tried to update is bringing me a 80004005 error. I serached for hours an all possible forums including this one. There seems to be a lot of people which have this problem. Many are solving this by downgrading to the version I have on already. At least this is what I understood.
I factory (hard resetted) the phone already. I tried with the lgmobile tool to download the firmware (no connection)
Is there any hint which can help me solving this problem?
The original firmwares I found within this forum have all dead links. I am in germany and the phone s OPN already. (Was already when I purchased.)
Any tip help hint firmware guide whatever higly appreciated.
Michael
No update
Sorry to push this.
Has nobody any idea or is my question unclear?
I have bought a used E900.
Te OS is 7.0.7004.
When I connect Zune it tries to bring me the February 2011 update.
This always fails with error 80007004.
I searched the internet as well as the forum but could not find any solution on this.
Is there a workarround for this? I read that it helps to flash one of the firmware versions here in the forum but I am unsure which one to tale. The OPN versions are offline as far as I could see and I have a OPN version already.
Please any support would be helpfull.
Many thanks in advance
Michael
Same Problem here: Only "Fix" was to send it to Service. Got it back one week after with the Softwareversion I bought it with. Updated again and it worked.
Related
Hi all
I own Niki 100 and don't have any service-signal at all. I've read all the threads and posts on this forum but there isn't any right answer to this. I unlocked my phone and it said security unlocked, install a new rom with radio and after that it gets no service. Is it a software or hardware problem. Please help
Thanks
please check your radio version, maybe it is not compatible to your phone or your used rom.
http://forum.xda-developers.com/showthread.php?t=369502
I tried everything, but no luck. Finally the official store changed the phone and now everything is OK. I was lucky, the guarantee was valid
Hi guys
I am having my friends Artemis in my hand. I never used this phone. But because my friend knew that I am a member of XDA he has challenged me to solve this problem. I have been trying hard to really make it work but somehow or the other its just not working. I tried microsd way, official ROM way, radio upgrade way but its just not working. Its showing update 300 error on all such attempts. Here is the technical information.
ipl 3.07.0001
spl 1.11.0000
I think its CID unlocked but yet its not taking any ROM.
It just gets me greenblack screen other than the bootloader whenver I try to switch it on.
Would love to know why is it happening as soon as possible, or else it will be shame for me inspite of being member of such a smart community.
Looking forward...
hi all friends, i came to this forum after looking for solution to similar problem in my phone. i download a rom from another site - and tried updating after following proper process. but it is showing error 300. i have tried many times. but no result.
corepda you find any solution to the problem? which rom you tried to update? plz help me. the phone costed me a lot in islamabad. i don't want to lose it.
hi all friends, i came to this forum after looking for solution to similar problem in my phone. i download a rom from another site - and tried updating after following proper process. but it is showing error 300. i have tried many times. but no result.
corepda you find any solution to the problem? which rom you tried to update? plz help me. the phone costed me a lot in islamabad. i don't want to lose it.
Same is the case here, I am not so well versed with this old p series phones. I am still waiting for some solution to this grave problem. I took it to some technician but he said its motherboard problem which is something I am not convinced of.
I tried mtty being in bootloader but nothing happening. No support for the same problem is there anywhere. Looking forward to have someone with same problem experience.
Plz guyz this phone is dead,help us to make it alive. Cheers.
so sad. what we do now?
Actually my friend(my cousin) got this device from a scammer & I being the one who bought on this behalf has to make it right. It was just a few days old & here I am with this dead device.
I will disclose the name of that scammer so everyone at xda should beware from indulging in any transaction from him.
I got this deal from some other India forum.
Regards
Corepda
I had a similar problem before when my orbit locked during a flash, from my knowledge your only way to fix this is by using an sd card, I used the sd card method with my carriers wm5 rom.
Note i had some problems with the SD Card flash method at first until i eventually used an old 256mb card, try a few different ones, borrow a card if yo need to and remember not sdhc and format it fresh. I wish you luck
Since you guys can´t enter bootloader, u may have a brick, .
Have u tried to get in contact with the QMAT guys?
Maybe they know how to fix it.
http://revskills.de/index.html
Cheers.
please help im wishing to upgrade my offical rom from 1.43 to 1.48 but says my phone is not suitable??????im totally thick coming from nokia to windows,i did use search but was unable to find the answer.
thanks phil
Hello and welcome on board,
Can you post up the exact error message you are getting please?
Also read this thread...http://forum.xda-developers.com/showthread.php?t=609477 which you will fond useful and come back with any questions.
Incidentally you are not a fool for asking as long as you have searched first.
WB
hi mate thanks for the reply,when i go to the htc offical rom download,i'm asked to enter my serial number,which i do but says my device is not suitable and won't let me proceed any further??
cheers phil
got a major problem now ive tried to update to 1.48 but it crashed now i get a warning traingle on start up,and can go into bootloader screen and it says upgrade rom code error please try again???someone please help.i hope i havent bricked my phone
Is your HD2 branded? (bought it in combination with a contract?)
hi mate its on vodafone contract buts its not branded.
Hi again,
Have you tried to hard reset your phone to see if the old rom boots up again?
If it does not then you might want to reflash your existing rom onto your phone using the SD card method (look at the threads at the top of the Rom Development page to find what you are looking for).
If it works and you are still keen to upgrade the rom you need to read the threads on using either the Goldcard or HardSPL methods to upgrade.
Come back and let us know how you got on.
WB
hi mate i was having the exact same probs as the chap in the hd2 bricked thread,same messages etc and stopping at 9% i took there advice and reflashed the hpsl again which has worked a treat,i'm now a little dubious bout trying to upgrade as i don't fancy bricking it.
ive emailed htc to see why i cant upgrade from 1.43 to 1.48 seems odd it says my phone isnt suitable.
p.s thanks for the help mate much appreciated
OK, wait until you hear back from them. However if you are now up and running and have installed HardSPL, I think you will find that flashing a new radio on its own might help solve your problems.
I think if you look at the thread you were referring to (this one...http://forum.xda-developers.com/showthread.php?t=618084), IIRC, MysticGenius runs through a procedure for doing this that helped him sort out a similar problem.
Good luck with it.
WB
PS: Lesson learned here though is to read exhaustively on the topics on here BEFORE jumping in as fixing problems later can be both time consuming, if you are lucky, and a pain in the rear. As for that horrible sick feeling you get when you think you have bricked £500 worth of phone....wouldn't recommend it to my worst enemy!
WB
***UPDATE*** Damn. I ran the update (filename is RUU_Vision_BellMobility_WWE_1.34.666.1_Radio_12.28b.60.140e_26.03.02.18_M2_release_154437_signed.exe), and the update process began. It started off with "Erasing User Data"... then "Sending"... then quickly brought up a window that said:
ERROR [156]: IMAGE ERROR The ROM Update Utility cannot update your Android phone. Please get the correct ROM Update Utility and try again.
This sounded like a good match for this device. I'm stuck now. Anyone have any ideas?
***old -UPDATE*** I found a Bell stock update... gonna try this out.. thanks for reading.
Hello all. Forgive me, I'm a Blackberry user and I just got an HTC Desire Z (it is locked to Bell in Canada - CDMA carrier?). I'm waiting for my unlock code to arrive (as I am on a different/GSM carrier) and I'm getting antsy to try it out.
I tried searching this forum tree using many different terms but all I've managed to find were custom ROMS and foreign official ones.
First thing I want to do is update it... I downloaded HTC Sync, which installed all the necessary drivers. (Except HTC Diag - found this online). So now I can connect it to my PC without any driver drama.
Then I went looking for an update. I found RUU_Vision_HTC_WWE_1.34.405.5_Radio_12.28b.60.140e_26.03.02.26_M_release_155556_signed.exe (but to be honest I wasn't sure if this is correct for my phone - I tried it anyway). It got so far as to reboot the phone to start the process but it then told me it wasn't the right update for my phone.
So that's where I am right now. I've been reading a lot about rooting, etc. but don't even want to go that far just yet. I just want to start off by getting a nice official software update/rom to get this thing up-to-date.
Currently, the version on this phone is 1.01.666.1 (sounds pretty old to me). I want to get rid of this blasted watermark (and I'm hoping a software update will take care of this).
Which ROM/software update is right for this phone? Any info / links would be appreciated. Thanks!
LaZiODROID said:
***UPDATE*** Damn. I ran the update (filename is RUU_Vision_BellMobility_WWE_1.34.666.1_Radio_12.28b.60.140e_26.03.02.18_M2_release_154437_signed.exe), and the update process began. It started off with "Erasing User Data"... then "Sending"... then quickly brought up a window that said:
ERROR [156]: IMAGE ERROR The ROM Update Utility cannot update your Android phone. Please get the correct ROM Update Utility and try again.
This sounded like a good match for this device. I'm stuck now. Anyone have any ideas?
***old -UPDATE*** I found a Bell stock update... gonna try this out.. thanks for reading.
Hello all. Forgive me, I'm a Blackberry user and I just got an HTC Desire Z (it is locked to Bell in Canada - CDMA carrier?). I'm waiting for my unlock code to arrive (as I am on a different/GSM carrier) and I'm getting antsy to try it out.
I tried searching this forum tree using many different terms but all I've managed to find were custom ROMS and foreign official ones.
First thing I want to do is update it... I downloaded HTC Sync, which installed all the necessary drivers. (Except HTC Diag - found this online). So now I can connect it to my PC without any driver drama.
Then I went looking for an update. I found RUU_Vision_HTC_WWE_1.34.405.5_Radio_12.28b.60.140e_26.03.02.26_M_release_155556_signed.exe (but to be honest I wasn't sure if this is correct for my phone - I tried it anyway). It got so far as to reboot the phone to start the process but it then told me it wasn't the right update for my phone.
So that's where I am right now. I've been reading a lot about rooting, etc. but don't even want to go that far just yet. I just want to start off by getting a nice official software update/rom to get this thing up-to-date.
Currently, the version on this phone is 1.01.666.1 (sounds pretty old to me). I want to get rid of this blasted watermark (and I'm hoping a software update will take care of this).
Which ROM/software update is right for this phone? Any info / links would be appreciated. Thanks!
Click to expand...
Click to collapse
I'm assuming from your initial post that you're not on Bell Canada and are wanting to use it on a different carrier? If that's the case, use gfree (see the wiki) to unlock your device (and fully root it, if you want).
Sent from my T-Mobile G2 using XDA App
Hi Guys ! Ireally hope you can help me !!! I purchased a lg g2 d802 on a website in germany (where i live). I updated my phone to lolipop. the update process finished without problem. now when i turned the phone on and wanted to use it, the touch screen was not properly working making the phone unusable. i processed a hard reset with the power and volume buttons but it didn t fix the problem. I messaged lg germany, with the imei number they found out that the phone is actually a version for the asian market, thing that i didn t know when i purchased the phone. i tried to get in touch with the website that sold me the phone but i can't. i don t get any answer from them. I guess the problem with the phone is that it was not made to work with the european lolipop update. does any one know, how i could fix that ? i am still a beginner with android. But i can understand technical stuffs quiet good.
ultimat971 said:
Hi Guys ! Ireally hope you can help me !!! I purchased a lg g2 d802 on a website in germany (where i live). I updated my phone to lolipop. the update process finished without problem. now when i turned the phone on and wanted to use it, the touch screen was not properly working making the phone unusable. i processed a hard reset with the power and volume buttons but it didn t fix the problem. I messaged lg germany, with the imei number they found out that the phone is actually a version for the asian market, thing that i didn t know when i purchased the phone. i tried to get in touch with the website that sold me the phone but i can't. i don t get any answer from them. I guess the problem with the phone is that it was not made to work with the european lolipop update. does any one know, how i could fix that ? i am still a beginner with android. But i can understand technical stuffs quiet good.
Click to expand...
Click to collapse
you need to open the phone and look at motherborad to be 100% sure about wich model/variant you have d802/d800/ls980 ect.
read the entire thread here. theres a video on how to.
http://forum.xda-developers.com/lg-g2/general/warning-to-people-bought-phones-ebay-t2991195
raptorddd said:
you need to open the phone and look at motherborad to be 100% sure about wich model/variant you have d802/d800/ls980 ect.
read the entire thread here. theres a video on how to.
http://forum.xda-developers.com/lg-g2/general/warning-to-people-bought-phones-ebay-t2991195
Click to expand...
Click to collapse
Thanks Buddy,
I followed the last tipp of the publisher of the thread you forwarded to me and try to get my money back. It turned up that the Company who sold me the phone finally answered after i reported them to paypal. And now we found a solution to the problem.
Thanks a lot for your help still. I appreciate it.
ultimat971 said:
Thanks Buddy,
I followed the last tipp of the publisher of the thread you forwarded to me and try to get my money back. It turned up that the Company who sold me the phone finally answered after i reported them to paypal. And now we found a solution to the problem.
Thanks a lot for your help still. I appreciate it.
Click to expand...
Click to collapse
you welcomed, you could use that phone just had to flash the correct variant. unless you wanted what you pay for
raptorddd said:
you welcomed, you could use that phone just had to flash the correct variant. unless you wanted what you pay for
Click to expand...
Click to collapse
Yeah exactly ! I don't like to be cheated out
ok, i have another question : now i got another lg g2 on android 4.4.2, it was working perfectly, this time i made sure that it was an european variant before i process any update then i did update the phone and i had exactly the same problem like i had with the other phone. after the update is completed, the phone has touch screen problem. i read a lot of infos on internet and learned how to flash firmwares. i first flash my lg to android 5.0.2, it succeeded but still this screen problem, then i flashed it back to android 4.4.2 and still have this touch screen problem. i wonder now if it s not because i use windows 10 !!! could it be ??
ultimat971 said:
ok, i have another question : now i got another lg g2 on android 4.4.2, it was working perfectly, this time i made sure that it was an european variant before i process any update then i did update the phone and i had exactly the same problem like i had with the other phone. after the update is completed, the phone has touch screen problem. i read a lot of infos on internet and learned how to flash firmwares. i first flash my lg to android 5.0.2, it succeeded but still this screen problem, then i flashed it back to android 4.4.2 and still have this touch screen problem. i wonder now if it s not because i use windows 10 !!! could it be ??
Click to expand...
Click to collapse
am not sure and i dont think it matters . since i dont kow much about KK post this in the help thread in general.