Related
My Motorola Defy goes dead after flashing.
-No Recovery
-No bootlaoder
But when i connect it with RSD, white led turns on and RSD connect it.
I try 3 different ROMs for Flashing but nothing has been changed.
When pressing vol down and power not going into recovery.
When Pressing Vol Up and power not showing black screen with white Text for bootloader.
-After flashing 3 Roms, RSD shows status PASSED and phone Reboots but not turn ON.
-Battery charged with Universal Charger
I installed these roms:
>JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_ USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
>JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB 1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Se rvice1FF.sbf
>JRDNEM_U3_2.59.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA035.0R_USAJORDANRTINT_P030_A020_HWp3_Service1FF.sbf
Every time i got staus passed message and cellphone reboots.
but now it is not going in recovery/bootloader or power on.
Completely Dead
When i go this phone it has eclair and than updated to froyo and than i moved to miui.
It comes from T Mobile. when i got, it has T Mobile startup logo and T mobile Apps in it.
cute_kayani said:
My Motorola Defy goes dead after flashing.
-No Recovery
-No bootlaoder
But when i connect it with RSD, white led turns on and RSD connect it.
I try 3 different ROMs for Flashing but nothing has been changed.
When pressing vol down and power not going into recovery.
When Pressing Vol Up and power not showing black screen with white Text for bootloader.
-After flashing 3 Roms, RSD shows status PASSED and phone Reboots but not turn ON.
-Battery charged with Universal Charger
I installed these roms:
>JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_ USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf
>JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_USAJRDNEMARAB 1B8TMGB030.0R_USAJORDANTMGB_P039_A015_M003_HWp3_Se rvice1FF.sbf
>JRDNEM_U3_2.59.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA035.0R_USAJORDANRTINT_P030_A020_HWp3_Service1FF.sbf
Every time i got staus passed message and cellphone reboots.
but now it is not going in recovery/bootloader or power on.
Completely Dead
When i go this phone it has eclair and than updated to froyo and than i moved to miui.
It comes from T Mobile. when i got, it has T Mobile startup logo and T mobile Apps in it.
Click to expand...
Click to collapse
I think I got the answer for you......
Use below mentioned steps and share the outcome:
1. Download the compressed SBF and extract using any software like 7zip or something - http://www.mediafire.com/?s3uc8cb782w1oue
[Note: Do not use any download manager while downloading.]
2. Use RSD Lite to flash the phone with the SBF file;
3. After flashing let the phone boot up and hopefully it will resolve the issue.
However if the phone is still in boot loops then try entering Stock recovery and wipe data/format and wipe cache also.
Please use the above steps and share the outcome.
ok i will download it and try it, but what i think is that, T Mobile is creating problem and i read some where there is only one SBF which work for T Mobile. Dont know for USA or UK. Mine cell is from UK.
Hopefully the link which you send helps me..
But the link you send for sbf is not down gradable. Can it create more problem for me if i install it and same black screen problem appears. And not rootable i think so how would i root it and move to custom rom,
cute_kayani said:
ok i will download it and try it, but what i think is that, T Mobile is creating problem and i read some where there is only one SBF which work for T Mobile. Dont know for USA or UK. Mine cell is from UK.
Hopefully the link which you send helps me..
But the link you send for sbf is not down gradable. Can it create more problem for me if i install it and same black screen problem appears. And not rootable i think so how would i root it and move to custom rom,
Click to expand...
Click to collapse
I recommend DON'T flash that SBF! Why? : Its a chinese and has the potential to fry your LED! And since it is not downgradable and rootable you may get stuck!(See this. From what I have seen in few threads there is a big chance your battery is dead and not charged!!
okay, if battery is dead why RSD connect it and every time status passed message appears.
PLz tell me what to do
pranks1989 said:
I recommend DON'T flash that SBF! Why? : Its a chinese and has the potential to fry your LED! And since it is not downgradable and rootable you may get stuck!(See this. From what I have seen in few threads there is a big chance your battery is dead and not charged!!
Click to expand...
Click to collapse
I understand your concern and I appreciate your comment however, I would like to point this out that this firmware is for "India, Indonesia, Malaysia, Philippines, Thailand, Vietnam" and its safe to flash I have flashed it multiple times and its Rootable and even my flash is healthy.
You may visit this link and Control+F "JRDNEM_U3_3.4.3-33-1":
http://and-developers.com/sbf:defy
The chinese firmware which is suspicious of burning flash is "China - JDGC_U6_0.26.0" [Correct me if I'm wrong.]
cute_kayani said:
ok i will download it and try it, but what i think is that, T Mobile is creating problem and i read some where there is only one SBF which work for T Mobile. Dont know for USA or UK. Mine cell is from UK.
Hopefully the link which you send helps me..
But the link you send for sbf is not down gradable. Can it create more problem for me if i install it and same black screen problem appears. And not rootable i think so how would i root it and move to custom rom,
Click to expand...
Click to collapse
cute_kayani said:
okay, if battery is dead why RSD connect it and every time status passed message appears.
PLz tell me what to do
Click to expand...
Click to collapse
You may use this firmware or any different firmware from this link : http://and-developers.com/sbf:defy
The ROM which I have given you link is Rootable however not down-gradable.
You may refer this extract from All-in-one-Guide-for-Defy
SBFs
SBF is how Motorola packs all the information to be Flashed on your phone. Inside this package are a lot of other files, each of these files named with CGXX where XX is a number.
So when you Flash a Full SBF, it takes the phone memory, format it, create the partitions and then copy the information inside these partitions. Each partition corresponds to a CGXX file. Here is where the eFuse thing kicks in.
There are a couple of CG files containing the version number of the Android you are flashing. So let’s say you are on Éclair Stock, first version, no updates no nothing. This version has a Version 1 number. When the phone gets updated, this version changes to Version 2 for example.
Each Android version has each own ID, once you go up, you CAN NOT go back, and this version is in CG31 AND CG39 files inside the SBF.
FIXED SBFs
Is a modified SBF without the CG31 and CG39 files, thus allowing to move between Android Versions freely.
Since the Fixed SBF creates all partitions but /System (CG39) and CDT (CG31), we need to copy System data using a Nandroid Backup or the phone will probably not work using the existing /System.
Nandroid Backup
This is just a .zip file flasheable with a Custom Recovery, this will Delete/Copy all the files in the /System and other partitions (depending on the Nandroid) without formatting or remaking the partition thus not modifying the system layout, eFuse or stuff; this is almost harmless, meaning you CANT brick your phone doing it, though you can make Android not boot and a new SBF or Nandroid would need to be installed.
CG Versions
With that explained let’s get to business with versions:
CG Version 2: SBF 2.21 / 2.34 / Chinese (Éclair) (Defy)
CG Version 3: SBF 2.51 (Éclair) (Defy)
CG Version 4: SBF 3.4.2 (Froyo) (Defy)
CG Version 5: SBF 4.5.0 / 4.5.1 (Gingerbread) (Defy)
CG Version 6: SBF 4.5.1 (Gingerbread, 2.3.6, (Red lens Defy/Defy+) )
CG Version 7: SBF 4.5.1 (Latests Gingerbreads, 2.3.6, (Red lens Defy/Defy+) )
ATTENTION: This CG 7 Version is NOT rooteable. You wont be able to flash a lower version ROM nor Root to use CWM.
If you try to flash a lower ID version than the one already on your phone, you will just get a Black screen after booting or a screen telling you to flash an official rom.
So, with this in mind, you can now hop between Android versions without screwing up your phone.
If you have an Éclair Defy and would like to keep the ability to downgrade to it, you should ONLY install FIXED SBFs of the Android Version you want to install, and then use the corresponding Nandroid Backup for that Fixed SBF.
Official SBFs
Here is a list of all the OFFICIAL SBFs, meaning they come with ALL CGs, these SBFs put your phone like Motorola sold it to you, just need to keep in mind that going UP in versions with FULL SBFS <WONT> I repeat, <WONT> allow you to go back to an older version.
Knowing this you should be able to test every single Android version out there and being able to go to Stock without issues. Just be sure to understand how CG versioning works and you should be fine.
Ref == http://forum.xda-developers.com/showthread.php?t=1216982
Click to expand...
Click to collapse
The only thing which is important here will be to use a Froyo or newer version SBF.
Thanks Rajneeshgadge17
JRDNEM_U3_3.4.3-33-1 is working...
thanks you for your precious time.....
Defy is seems okay now and will tell you if i found any bug in this JRDNEM_U3_3.4.3-33-1.
I think i flashed every time with eclair and that was the main problem. First time flashed with froyo and black screen gone.
Thanks again and plz tell to root this rom is as easy like what i did with orignal froyo.
I did it with Super one click and than use 2ndint and moved to custom rom.
plz tell should i follow all those steps for rooting and for custom rom, or there is something new to be done for this flashed Rom.
Thanksssssss ,, i am so happy now
cute_kayani said:
Thanks Rajneeshgadge17
JRDNEM_U3_3.4.3-33-1 is working...
thanks you for your precious time.....
Defy is seems okay now and will tell you if i found any bug in this JRDNEM_U3_3.4.3-33-1.
I think i flashed every time with eclair and that was the main problem. First time flashed with froyo and black screen gone.
Thanks again and plz tell to root this rom is as easy like what i did with orignal froyo.
I did it with Super one click and than use 2ndint and moved to custom rom.
plz tell should i follow all those steps for rooting and for custom rom, or there is something new to be done for this flashed Rom.
Thanksssssss ,, i am so happy now
Click to expand...
Click to collapse
I'm glad to know that it’s finally working for you!!
Yeah to root this follows the same procedure as you have used with the Éclair...
Simply Turn on USB debugging and use Super One click to Root.... >>>> then use 2nd init apk to flash with the Custom recovery
All Izz Well!!
Thanks Rajneeshgadge17
JRDNEM_U3_3.4.3-33-1 is working...
thanks you for your precious time.....
Defy is seems okay now and will tell you if i found any bug in this JRDNEM_U3_3.4.3-33-1.
I think i flashed every time with eclair and that was the main problem. First time flashed with froyo and black screen gone.
Thanks again and plz tell to root this rom is as easy like what i did with orignal froyo.
I did it with Super one click and than use 2ndint and moved to custom rom.
plz tell should i follow all those steps for rooting and for custom rom, or there is something new to be done for this flashed Rom.
Thanksssssss ,, i am so happy now
cute_kayani I think you double posted mistakenly....
Have already answered your query above
I'm glad to know that it’s finally working for you!!
Yeah to root this follows the same procedure as you have used with the Éclair...
Simply Turn on USB debugging and use Super One click to Root.... >>>> then use 2nd init apk to flash with the Custom recovery
All Izz Well!!
Click to expand...
Click to collapse
---------- Post added at 09:26 PM ---------- Previous post was at 09:12 PM ----------
One important thing for your information is the reason behind those black screens was that you must have flashed Froyo SBF before; which was not down-gradable and now at this point you were trying Éclair which resulted in this issue.
So, the Downgradibility of your previous flashed SBF was causing this issue.
Now, as you have flashed this Froyo SBF; so, now onward in case you need to flash you phone you need to use SBF which should be Froyo or newer and must have “3.4.3” or later Build Numbers.
Hope this helps someone who needs this information.
okay
one bug found, market is still not updated to play store, and when i try to download it says download paused . i cleared both data and cache of market but still not downloading and stuck at paused.
cute_kayani said:
okay
one bug found, market is still not updated to play store, and when i try to download it says download paused . i cleared both data and cache of market but still not downloading and stuck at paused.
Click to expand...
Click to collapse
LOL its official Froyo it might have more bugs
haha okay i am moving to miui.... but from past 7 days my defy remains dead due to Miui weekly rom update
hopefully this time miui wont make any problem
LOL
All the very best this time ..
You know what last week I also updated to MIUI 2.3.23 and my wifi was not working with that ROM however, it was working fine with my CM9 as I had dual boot.
Please update me if you also face this issue with the MIUI 2.3.30
currently am on 2.3.23 every thing is okay, and wifi also working now am updating it to 2.3.30. will tell you if there any wifi bug.
Will wait for your review!!
More force close, and now message comes for low storage. DON'T know why.. some apps moved to SD.
cute_kayani said:
More force close, and now message comes for low storage. DON'T know why.. some apps moved to SD.
Click to expand...
Click to collapse
Lol 2GB internal memory occupied
Yesterday night I flashed with MotoGinger III for a change... so far so good. However, AutoWifi fix is resetting my wifi pwd every 15 mins or so ..
Occupied :/ now how to free that, miui occupied or rom flash occupied it. Internal storage is now just 15 mb left. How to use this defy now
But I used miui before flash, at that time I haven't experienced any low storage problem.
Occupied :/ now how to free that, miui occupied or rom flash occupied it. Internal storage is now just 15 mb left. How to use this defy now
But I used miui before flash, at that time I haven't experienced any low storage problem.
hello every one ..
actually i have a big problem in my defy plus ....that is i am not able to root it from the day i swaped this
Blur_Version.45.0.2310.MB526.AsiaRetail.en.03 (2012/01/12)
reffered from this
http://forum.xda-developers.com/showthread.php?t=1495099
i ll now request u guys to please listen carefully and help me out
so the starting of the destruction of my defy plus was when i saw this on youtube
http://www.youtube.com/watch?v=3v9O...Kk&annotation_id=annotation_424204&feature=iv
i saw the video and like everyone else tried to upgrade my phone to ics... (this is the point where i would like to kill myself for doing that)
but unfortunately i encountered an error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
at that point i thought i was done and didnt knew much about the rdslite and bootloader and all that stuff...i was gone crazy and tried to search a solution on google and found out that it was the sbf that was damaged so in a hurry i read this
http://forum.xda-developers.com/showthread.php?t=1216982
and found an SBF and switched it using RSDlite but to my surprise i flashed a chinese sbf from here
http://sbf.droid-developers.org/umts_jordanplus/list.php
...not knowing much about SBF i tried a lot to find an Asia pacific SBF for my defy and i (not knowing much about it ) flashed
Blur_Version.45.0.2310.MB526.AsiaRetail.en.03 (2012/01/12)
when the process was complete i was so happy that i fixed my defy but i actually made it worse
now i was not able to root not able to install bootmenu or any thing else this all has happened just last weekend
first i accepted it and thought its better this way
but after some time i realized my mistake and now i posted it on this sit
plzz help me find a suitable SBF because previosly i tried some
like this
http://forum.xda-developers.com/showthread.php?t=1375701
and the result was that my phone wasn't switching on it sowed a white led light
it was the same result in the second one so i switched back to
Blur_Version.45.0.2310.MB526.AsiaRetail.en.03
Please guys tell me which sbf should i use or what shoud i do ??? .....if my dad figures out about it ill definitely get scolded very bad...... please help i also know that there would be thousands of other users out there who might get help from this question ,,,
SO PLEASE HELPP ME
All the best friend
http://forum.xda-developers.com/forumdisplay.php?f=855 THIS LINK FOR DOWNLOAD THIS sBF.
4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage ,u flashed this sbf
Then root with SuperOneClickv2.3.3-Short Fuse.
STEP for ROOT MOTOROLA DEFY PLUS.
1.GO TO SETTINGS
2. In Application go to development
3.Enable the USB debugging
4.Install superuser ,Then Run SuperOneClickv2.3.3-Short Fuse Run AS administration .then click root process is going ,its asked if u want to test the root just say no ,then reboot the the phone then
5.Install 2ndInit Recovery Installer v2.3
http://forum.xda-developers.com/sho...snugly.euroskank.com/skankwich/?id=jordanplus)
ela1103 said:
4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage ,u flashed this sbf
Then root with SuperOneClickv2.3.3-Short Fuse.
Click to expand...
Click to collapse
Really??? Root a BL7 sbf with SuperOneClick? I'd pay to see this!
@trusharbhan
Here is a thread about rooting a BL7 ROM
plzz help again ....
ela1103 said:
http://forum.xda-developers.com/forumdisplay.php?f=855 THIS LINK FOR DOWNLOAD THIS sBF.
4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage ,u flashed this sbf
Then root with SuperOneClickv2.3.3-Short Fuse.
STEP for ROOT MOTOROLA DEFY PLUS.
1.GO TO SETTINGS
2. In Application go to development
3.Enable the USB debugging
4.Install superuser ,Then Run SuperOneClickv2.3.3-Short Fuse Run AS administration .then click root process is going ,its asked if u want to test the root just say no ,then reboot the the phone then
5.Install 2ndInit Recovery Installer v2.3
http://forum.xda-developers.com/sho...snugly.euroskank.com/skankwich/?id=jordanplus)
Click to expand...
Click to collapse
i did swaped the rom and now i got blank screen .... my phone is not opening what to do??? its stuck it would not open even after the process said PASS ..
.i when connected it with usb it showed a white light and also my phone i heating up incredibly .......plzzz tell if the process is PASS then why wont it open??? how to get it back to work again.....
Auris 1.6 vvt-i said:
Really??? Root a BL7 sbf with SuperOneClick? I'd pay to see this!
@trusharbhan
Here is a thread about rooting a BL7 ROM
Click to expand...
Click to collapse
hey man i read your thread and i think itll be helpfull but only when i get the right sbf please read my other reply to @ ela1103 and help me if u know how to correct it
OK, calm down and describe EXACTLY what have you downloaded and how have you flashed it.
Yes Iam using this sbf in my motorola defy plus
Auris 1.6 vvt-i said:
Really??? Root a BL7 sbf with SuperOneClick? I'd pay to see this!
@trusharbhan
Here is a thread about rooting a BL7 ROM
Click to expand...
Click to collapse
Yes Iam using this sbf in my motorola defy plus .i root with SuperOneClickv2.3.3-Short Fuse.now iam using cm9 kangs by FuZZ_ Ok
this is what i did
Auris 1.6 vvt-i said:
OK, calm down and describe EXACTLY what have you downloaded and how have you flashed it.
Click to expand...
Click to collapse
actually i downloaded 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage from here
http://forum.xda-developers.com/showthread.php?t=1386942
then i switched off my defy and did as it says here
http://forum.xda-developers.com/showthread.php?t=1618718
(just that i used the sbf mentioned above not from the link given in this thread)
so when the rsdlite finished it said rebooting but it didnt reboot (just power went off) and then rsdlite said PASS
after that i thought that the process is compleate and removed device from usb but it didnt open(blank screen) and
so i tried to open it connecting usb and it didnt open but showed connected in rsdlite and my device showed white led light
since it was heating up i removed the usb and battery from my device and started posting in xda
and that should be all that i did in past 1hour....
it work for you .
tusharbhan said:
hey man i read your thread and i think itll be helpfull but only when i get the right sbf please read my other reply to @ ela1103 and help me if u know how to correct it
Click to expand...
Click to collapse
Now YOU Go to the Motorola recovery mode ,First press the power button at the same time press volume down button .now you enter motorola recovery mode,fist wipe data factory rest and wipe cache partition.
Then enter into bootloader mode.then flash this 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage. then phone boot up. use this method
http://sbf.droid-developers.org/umts_jordanplus/list.php THIS LINK FOR DOWNLOAD THIS sBF.
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf.gz.use this sbf . ITS is in 6 the one sbf .iam using this sbf only in my defy plus , its must work for u r defy plus
..
ela1103 said:
Now YOU Go to the Motorola recovery mode ,First press the power button at the same time press volume down button .now you enter motorola recovery mode,fist wipe data factory rest and wipe cache partition.
Then enter into bootloader mode.then flash this 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage. then phone boot up. use this method
http://forum.xda-developers.com/forumdisplay.php?f=855 THIS LINK FOR DOWNLOAD THIS sBF.
4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage.use this sbf . its must work for u r defy plus
Click to expand...
Click to collapse
ok so for that i think i have to flash the previous one back
because i did that and now it worked ill try ur method
same old result...
ela1103 said:
Now YOU Go to the Motorola recovery mode ,First press the power button at the same time press volume down button .now you enter motorola recovery mode,fist wipe data factory rest and wipe cache partition.
Then enter into bootloader mode.then flash this 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage. then phone boot up. use this method
http://sbf.droid-developers.org/umts_jordanplus/list.php THIS LINK FOR DOWNLOAD THIS sBF.
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf.gz.use this sbf . ITS is in 6 the one sbf .iam using this sbf only in my defy plus , its must work for u r defy plus
Click to expand...
Click to collapse
i did what u said and again ended up being with black screen ... the phone dosent powers on and the white led light is seen when plugged to usb.......
what to do help...
Use this rsd lite 4.9
Use this rsd lite 4.9
use this sbf
Asia Retail
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS0 3C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf. gz
DOWNLOAD(http://forum.xda-developers.com/showthread.php?t=1421526)
where will you buy this Motorola defy plus .r u from India
i was doing that only...
ela1103 said:
Use this rsd lite 4.9
use this sbf
Asia Retail
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS0 3C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf. gz
DOWNLOAD(http://forum.xda-developers.com/showthread.php?t=1421526)
Click to expand...
Click to collapse
i am using rsdlite 4.9 and i used
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS0 3C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf. gz
but still the same .....black screen
can we talk in gtalk or chat
well yea
ela1103 said:
can we talk in gtalk or chat
Click to expand...
Click to collapse
sure thing mate ill give u my id its [email protected]
your defy is back
and, what was the solution? I am having the same problem.
@ tushar - is your defy working ?
same problem
yeah.. I got the same problem too, wait for the solution..
before wanting to help if u want to know the whole situation what happened then u can see it here
http://forum.xda-developers.com/showthread.php?t=1713465
now my problem is that i want an SBF for my motorola defy plus MB256 which is stable, can be rooted , can be upgraded to ics CM9 and with no bugs........since i am only able to flash the SBF of these type
DEFYPLUS_U3_4.5.1-134_DFP-231
any other sbf i try is failed
(rsdlite says pass but black screen shows up whith white led)
:crying:
currently i am using DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_USAJRDNGIBRRTGB_P023_A025_M002_Service1FF
also DEFYPLUS_U3_4.5.1-134_DFP-231 types are all unrootable and hence i am helpless
Firstly: there is no such thing as CM9 with no bugs (but they are getting better and better). Second: use search option before posting. You're not special. This question has been asked 1000 times.
The black screen when flashing is because you're trying to flash an sbf with a lower codegroup version. You're on level 7. There is no downgrade to any sbf woth a lower codegroup version. Read about it here (search the first post for "downgrade")
You can't use the rooting toolkits because you have bootloader7 (e-fuse "blown" to level 7. The old rooting exploits don't work any more) How to root your build: DFP-188, DFP-231, DFP-2311 BL7 Finally Rooted
Please, guys: I'm not on bl7 myself, so correct me if I'm wrong on anything.
fiskenigaten said:
Firstly: there is no such thing as CM9 with no bugs (but they are getting better and better). Second: use search option before posting. You're not special. This question has been asked 1000 times.
The black screen when flashing is because you're trying to flash an sbf with a lower codegroup version. You're on level 7. There is no downgrade to any sbf woth a lower codegroup version. Read about it here (search the first post for "downgrade")
You can't use the rooting toolkits because you have bootloader7 (e-fuse "blown" to level 7. The old rooting exploits don't work any more) How to root your build: DFP-188, DFP-231, DFP-2311 BL7 Finally Rooted
Please, guys: I'm not on bl7 myself, so correct me if I'm wrong on anything.
Click to expand...
Click to collapse
well i read that guide
thanks for the info man but u see if i have defy plus and i am at cg7 with bootloader version 7 and it is unrootable then my question to u would be
HOW WAS I ABLE TO ROOT MY PHONE WHEN I BUYED IT
i mean before doing the cm9 experiment my phone was in android 2.3.6 and i was able to root/unroot it using DooMLoRD's Easy Rooting Toolkit
from here http://opusbonum.blogspot.in/
and it was all going fine untill i made a mistake in upgrading to cm9(for full data visit http://forum.xda-developers.com/showthread.php?t=1713465)
plus i am asking for solutions no links of threads
(its because in last 2 weeks i am searching xda for solutions and couldn't come up with anything)
http://forum.xda-developers.com/showthread.php?t=1542956
this link i tried but it ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
so plzz now tell me what to do
i want my defy plus back like before :crying:
or if there is way to change BL version and also i have a stupid question
HOW DO WE SEE OUR BL VERSION?
tusharbhan said:
well i read that guide
thanks for the info man but u see if i have defy plus and i am at cg7 with bootloader version 7 and it is unrootable then my question to u would be
HOW WAS I ABLE TO ROOT MY PHONE WHEN I BUYED IT
i mean before doing the cm9 experiment my phone was in android 2.3.6 and i was able to root/unroot it using DooMLoRD's Easy Rooting Toolkit
from here http://opusbonum.blogspot.in/
and it was all going fine untill i made a mistake in upgrading to cm9(for full data visit http://forum.xda-developers.com/showthread.php?t=1713465)
plus i am asking for solutions no links of threads
(its because in last 2 weeks i am searching xda for solutions and couldn't come up with anything)
http://forum.xda-developers.com/showthread.php?t=1542956
this link i tried but it ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
so plzz now tell me what to do
i want my defy plus back like before :crying:
or if there is way to change BL version and also i have a stupid question
HOW DO WE SEE OUR BL VERSION?
Click to expand...
Click to collapse
Did you just read the threads in the link. I just can't get the part
plus i am asking for solutions no links of threads
Click to expand...
Click to collapse
. Don't you see Link is the solution.Or do you somehow assume someone would copy & paste a whole thread here.
I'm again quoting the solution. Just click the thread and read. Its all described there.
PS: Your BL version is decided with the ROM build. CG7 & BL7 are the same thing, the moral of the story is You are on BL7 (Bootloader 7)
fiskenigaten said:
Firstly: there is no such thing as CM9 with no
You can't use the rooting toolkits because you have bootloader7 (e-fuse "blown" to level 7. The old rooting exploits don't work any more) How to root your build: DFP-188, DFP-231, DFP-2311 BL7 Finally Rooted
Click to expand...
Click to collapse
neo.ank said:
Did you just read the threads in the link. I just can't get the part . Don't you see Link is the solution.Or do you somehow assume someone would copy & paste a whole thread here.
I'm again quoting the solution. Just click the thread and read. Its all described there.
PS: Your BL version is decided with the ROM build. CG7 & BL7 are the same thing, the moral of the story is You are on BL7 (Bootloader 7)
Click to expand...
Click to collapse
hey there i know that i am at Bootloader 7 and i got that its currently unrootable so at this link (http://forum.xda-developers.com/showthread.php?t=1542956) they are trying to find a solution
but u see the method didnt worked for me
i ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
tried 2 times still the same.....
and i would really appreciate if u guys first read the whole story of mine
here
http://forum.xda-developers.com/showthread.php?t=1713465
then u might be able to understand my situation
tusharbhan said:
hey there i know that i am at Bootloader 7 and i got that its currently unrootable so at this link (http://forum.xda-developers.com/showthread.php?t=1542956) they are trying to find a solution
but u see the method didnt worked for me
i ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
tried 2 times still the same.....
and i would really appreciate if u guys first read the whole story of mine
here
http://forum.xda-developers.com/showthread.php?t=1713465
then u might be able to understand my situation
Click to expand...
Click to collapse
u got this error in the first step flash or in the step 2 flash?
tusharbhan said:
hey there i know that i am at Bootloader 7 and i got that its currently unrootable so at this link (http://forum.xda-developers.com/showthread.php?t=1542956) they are trying to find a solution
but u see the method didnt worked for me
i ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
tried 2 times still the same.....
and i would really appreciate if u guys first read the whole story of mine
here
http://forum.xda-developers.com/showthread.php?t=1713465
then u might be able to understand my situation
Click to expand...
Click to collapse
Redownload the files. make sure you use both files from the same source(either both CN or both CEE). do a complete wipe from recovery. The error you are getting occurs when you flash an SBF with lower version than you are on but since CG7 is highest till date, this means you can flash those only with a CG7 SBF. I read what you did.
PS: BL7 is rootable by flashing a rooted SBF.Thats what the other thread is about.
neo.ank said:
Redownload the files. make sure you use both files from the same source(either both CN or both CEE). do a complete wipe from recovery. The error you are getting occurs when you flash an SBF with lower version than you are on but since CG7 is highest till date, this means you can flash those only with a CG7 SBF. I read what you did.
PS: BL7 is rootable by flashing a rooted SBF.Thats what the other thread is about.
Click to expand...
Click to collapse
yea now i get it i got the error on this step
4. Flash rooted SBF 4.5.1-134 DFP-231 CN Rooted SBF Part.1, 4.5.1-134 DFP-231 CN Rooted SBF Part.2 or 4.5.1-134 DFP-231 Retail.en.EU CEE Rooted SB
it might be because i skipped this step
2. Flash 4.5.1-134 DFP-231 CN or 4.5.1-134 DFP-231 Retail.en.EU CEE (It doesn't matter what version of this two You flash but it must be the same with version from point 4).
because i thought that i already had DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN
so it might work but it didnt this time ill try the complete process
thank u guys
:laugh:
okaay this time i tried each and everything as same as given here
http://forum.xda-developers.com/showthread.php?t=1542956
but when flashing rooted sbf rsd lite was restarting my phone and the process ended in 16% and i got an error in my phone
Bootloader
09.10
Err:A5,69,35,00,27
Battery Ok
OK to Program
Connect USB
Data Cable
what to do now
Dear tusharbhan,
it seems your datacable is too long (it will loss signals if the cable is disfunctional), try it with a very short datacable and use the usb-port which directly connected with the motherboard of your computer.
RATTAR said:
Dear tusharbhan,
it seems your datacable is too long (it will loss signals if the cable is disfunctional), try it with a very short datacable and use the usb-port which directly connected with the motherboard of your computer.
Click to expand...
Click to collapse
I don't think the length is the problem (I use an extended cable which is double the length of original)but yes changing the cable or port might do it.
tusharbhan said:
okaay this time i tried each and everything as same as given here
http://forum.xda-developers.com/showthread.php?t=1542956
but when flashing rooted sbf rsd lite was restarting my phone and the process ended in 16% and i got an error in my phone
Bootloader
09.10
Err:A5,69,35,00,27
Battery Ok
OK to Program
Connect USB
Data Cable
what to do now
Click to expand...
Click to collapse
The files might be corrupted, Re-download,also try changing your port/cable.
Also check you RSDLite version too.
it worked
http://forum.xda-developers.com/show....php?t=1542956
finally i got it worked
the thing was i was doing a step wrong
i flashed
4.5.1-134 DFP-231 CN
and
rooted version 4.5.1-134 DFP-231 Retail.en.EU CEE Rooted SBF
that is why i got bootloader error
now i flashed 4.5.1-134 DFP-231 Retail.en.EU CEE
and rooted version 4.5.1-134 DFP-231 Retail.en.EU CEE Rooted SBF
and it worked
yay i am so happy
thanks to all
fiskenigaten , neo.ank and imam88
thank u very much guys:good: :laugh:
now to upgrade
thank u guys to help me
now i am finally rooted
and i will request 1 last thing
i have few questions and would like the answers....
1) i want to upgrade to CM9 how do i do it ? (please explain the method because last time i failed u can see here http://forum.xda-developers.com/showthread.php?t=1713465)
2) if not CM9 then can i upgrade to CM7
3) u see i am a noob i dont know much about roms and how to flash them so please explain to me how to flash custom rom etc
thank u again guys :good:
tusharbhan said:
thank u guys to help me
now i am finally rooted
and i will request 1 last thing
i have few questions and would like the answers....
1) i want to upgrade to CM9 how do i do it ? (please explain the method because last time i failed u can see here http://forum.xda-developers.com/showthread.php?t=1713465)
2) if not CM9 then can i upgrade to CM7
3) u see i am a noob i dont know much about roms and how to flash them so please explain to me how to flash custom rom etc
thank u again guys :good:
Click to expand...
Click to collapse
Good you got it rooted (I already told you to keep both files same And its mentioned explicitly at the Root thread)
You need Custom recovery to flash a custom ROM.
Install 2ndInit first
And just be careful before you begin with anything.Never Hurry. Reading carefully what's written won't hurt you. But doing idiotic mistakes just coz you weren't careful will.
Update cm9 for defy plus
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
confused
ela1103 said:
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
Click to expand...
Click to collapse
thank u guys u see i want CM9 but before that i want to ask 2 questions more
will it be okay i mean will my defy plus run better or slower
can i downgrade to 2.3.6 if i dont like or something (is it one way decision):silly:
please suggest me
and yea hey @ela1103 thank u but can i use this site
http://forum.xda-developers.com/showthread.php?t=1432100
but can u explain what does it mean buy these steps
:FLash
6:Flash CM9 Kernel [Note: Defy Plus users DO NOT FLASH KERNEL ZIP!]
7:Flash Gapps zip(On first page of ICS DeV thread)
8:Flash Battery Fix(Only for Red Lens) http://dl.dropbox.com/u/29851821/ICS...tery Fix.zip
9:Clear Cache and Dalvik Cache
from here i didnt understood
do i have to flash kernal or not
whats up with battery fix
??
[ICS][CM9]Defy/Defy+ kangs by FuZZ
Defy Plus users DO NOT FLASH KERNEL ZIP
Here is the link for cm9 defy plus
http://forum.xda-developers.com/showthread.php?t=1673116
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
ela1103 said:
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
Click to expand...
Click to collapse
ela1103 said:
Defy Plus users DO NOT FLASH KERNEL ZIP
Here is the link for cm9 defy plus
http://forum.xda-developers.com/showthread.php?t=1673116
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
Click to expand...
Click to collapse
You sure everything you posted is correct.!! Better detail things and maintain integrity of your posts. Helping someone is a good thing but a small mistake could end up in disaster.
@OP Here is the link for supported ROMs(see the first post). You can chose any under Gingerbread.
Here is [APP] 2ndInit Read installation instructions carefully. At this step you can screw your phone.
What a Custom recovery and 2ndInit is, you'll find it here.
PS: Since the problem(rooting) you started this thread for is solved, its better to post your relevant questions in the respective threads and discontinue this one.This makes thing confusing and hectic for users.
thanks
neo.ank said:
You sure everything you posted is correct.!! Better detail things and maintain integrity of your posts. Helping someone is a good thing but a small mistake could end up in disaster.
@OP Here is the link for supported ROMs(see the first post). You can chose any under Gingerbread.
Here is [APP] 2ndInit Read installation instructions carefully. At this step you can screw your phone.
What a Custom recovery and 2ndInit is, you'll find it here.
PS: Since the problem(rooting) you started this thread for is solved, its better to post your relevant questions in the respective threads and discontinue this one.This makes thing confusing and hectic for users.
Click to expand...
Click to collapse
ill see to it later currently i have no plans on upgrading now because of a sudden delay so ill keep u guys posted when i try that:fingers-crossed:
i really appreciate your efforts and your help thank you very much
and yea about starting new thread..... well i am sorry i was kind of freaked out
and was in a hurry so ... u ll understand i wont repeat my again
:highfive:thank you very much........ i had been struck with same problem for more than week......
finally able to root my defy plus.......but it being repeatedly rebooted after every 30 secs is there any solution for that?????????????.
thanks in advance........:good::good::good:
Hi everybody.
Being short; I had miui 2.3.7f, I decided to change to the new miui V5, but the installation was wrong.
I couldn´t make the Wipes properly because the unit E:\ was unmounted, and the result, a slow system.
I decided to change the rom, but in this case,not using the TWRP recovery. I decoided to flashing SBF files via RSD.
The first one,was interrupt by slow battery, I tried later and nothing happens.
Reading in the forum, some user recommended this one DEFYPLUS_U3_4.5.1-134_DFP-2312_TMOUK_SIGN_DE..
and actually, is the only rom that I tried, that it shows the "M" logo before bootloader
At this point the bootloader 09.10 shows me the ERR:a5,69,35,00,27
I´m not sure but, could be a problem of kernel ? For put a rom of defy+?
I perfectly know, there are 4 or 5 threads about that, I read, but wasn´t useful for me
everything is welcome !!!
pikaetas said:
Hi everybody.
Being short; I had miui 2.3.7f, I decided to change to the new miui V5, but the installation was wrong.
I couldn´t make the Wipes properly because the unit E:\ was unmounted, and the result, a slow system.
I decided to change the rom, but in this case,not using the TWRP recovery. I decoided to flashing SBF files via RSD.
The first one,was interrupt by slow battery, I tried later and nothing happens.
Reading in the forum, some user recommended this one DEFYPLUS_U3_4.5.1-134_DFP-2312_TMOUK_SIGN_DE..
and actually, is the only rom that I tried, that it shows the "M" logo before bootloader
At this point the bootloader 09.10 shows me the ERR:a5,69,35,00,27
I´m not sure but, could be a problem of kernel ? For put a rom of defy+?
I perfectly know, there are 4 or 5 threads about that, I read, but wasn´t useful for me
everything is welcome !!!
Click to expand...
Click to collapse
re-flash sbf when RSDlite says that the device is rebooting and it does not, remove the battery and put it in again and go to stock recovery (vol down + power,when the android with the ! appear press both volume buttons) and make a factory reset.
Zeroemd said:
re-flash sbf when RSDlite says that the device is rebooting and it does not, remove the battery and put it in again and go to stock recovery (vol down + power,when the android with the ! appear press both volume buttons) and make a factory reset.
Click to expand...
Click to collapse
Thanks zeromd,I tried but when Im trying PWR+VOLDOWN, nothing happens.
Only when I stop to press, the bootloader apears again, with the error .
Could you explain me why the defyplus rom seems to boot, and not the rest ?
pikaetas said:
Thanks zeromd,I tried but when Im trying PWR+VOLDOWN, nothing happens.
Only when I stop to press, the bootloader apears again, with the error .
Could you explain me why the defyplus rom seems to boot, and not the rest ?
Click to expand...
Click to collapse
I own a Green Lens defy (mb525).
Yet I searched a bit and a guy in snother forum solved this problem flashing
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF
but as the name suggests it is intended for the Defy+ (mb526) but It seems that you have flashed one alredy, so idk if you want to try it. and if by any chance the .sbf is not on you main HDD put it on you desktop.
Zeroemd said:
I own a Green Lens defy (mb525).
Yet I searched a bit and a guy in snother forum solved this problem flashing
but as the name suggests it is intended for the Defy+ (mb526) but It seems that you have flashed one alredy, so idk if you want to try it. and if by any chance the .sbf is not on you main HDD put it on you desktop.
Click to expand...
Click to collapse
Thanks again, but the file is´corrupt
Ill try to find it and I´ll let you know.
pikaetas said:
Thanks again, but the file is´corrupt
Ill try to find it and I´ll let you know.
Click to expand...
Click to collapse
Hi again.
Zeroemd, I´ve got some news........ IT´S ALIVE !!!!!!:laugh::laugh::laugh:
I finally found the correct SBF, it´s that
vvvvv.mediafire.com/download/31pbi59a275f7ry/DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
Now I want to go step by step making things as better as possible since arrive to Kit Kat !!!
The first .. nandroid.
Thanks a lot
pikaetas said:
Hi again.
Zeroemd, I´ve got some news........ IT´S ALIVE !!!!!!:laugh::laugh::laugh:
I finally found the correct SBF, it´s that
vvvvv.mediafire.com/download/31pbi59a275f7ry/DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
Now I want to go step by step making things as better as possible since arrive to Kit Kat !!!
The first .. nandroid.
Thanks a lot
Click to expand...
Click to collapse
Well I am Glad your phone is alive !
anything you need PM me :good:
Hello to all.
I have a cell DEFY MB525 and he was flashing a ROM with brick and was wrong. With white led. I looked at various threads here in this forum, I discovered how to revive using a ROM BL7 the DEFY MB526.
However coming back to the original ROM MB525, or any other rom, the phone brick. Appearing white led.
I can not use the ROM BL7 Defy MB526, because I can not customize with a modified rom (cyanogemod for example) and worse and that many features of the device are in trouble, such as wifi, bluetooth connections.
One of the most common problems in using the MB526 is a ROM that the device is restarting all the time.
To advance, I'll tell you what I did:
I tried all the ROMS BL7 site (4.5.1-134)
I tried to put a ROM BL7 then a Chinese ROM:
JDGC_U6_2.12.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANGCCORE_P013_A033_HWp3_Service1FF
Another Chinese Rom:
JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF
And in both tests the phone brick.
I also tried several of the rooms MB525 (not all, but I'll still try ...)
I also tried to install a custom rom MB526:
cm10.Quarx24.09.Defy + red.fixed.sbf
In addition to some custom roms the MB525:
FroyoCEE_cm7.2_2.3.7
Froyo-MIUIandroid.2.4.20-fixed
Froyo-cm9.epsylon-27.06.12.bl4-fixed
froyo.cm10.JB.Quarx.24.09Defy.red.green.bl4.fixed
However .. all attempts brick the phone.
There is finally a way back for any rom MB525, preferably one ROOT to customize with Android 4.0 and use multiple languages?
Once you flash a higher BL version, there's no turning back! You are now stuck with BL7 SBF's only.You should have read the "All-in-one Defy Beginers' gide" by Zephyrot beforehand.
Try This :
http://forum.xda-developers.com/showthread.php?t=2318453
jalal-jap said:
Try This :
http://forum.xda-developers.com/showthread.php?t=2318453
Click to expand...
Click to collapse
So ...
Excuse my ignorance. I believe that some procedures should have a minimum of knowledge. Thanks Aurius!
I've plotted a plan to recover and am following with a mix of topics from the forum.
I managed to do the following:
http://forum.xda-developers.com/showthread.php?t=1595013
And with this I could install Boot to install custom roms
Also unable to access the custom boot and install:
cm-7-20130301-NIGHTLY-Jordan or CM10-20120924-NIGHTLY-mb525
The problem is that if I install "cm-7-jordan" the phone never leaves the logo "M" .. and if I install CM10-Nightly-mb525 the phone is stuck in "cyanogen logo"
I've tried making various wipes .. the normal boot ... by custom boot without success ..
Not to mention that I'm still with the problem of direct restart the phone.
alex.p.mahmud said:
So ...
Excuse my ignorance. I believe that some procedures should have a minimum of knowledge. Thanks Aurius!
I've plotted a plan to recover and am following with a mix of topics from the forum.
I managed to do the following:
http://forum.xda-developers.com/showthread.php?t=1595013
And with this I could install Boot to install custom roms
Also unable to access the custom boot and install:
cm-7-20130301-NIGHTLY-Jordan or CM10-20120924-NIGHTLY-mb525
The problem is that if I install "cm-7-jordan" the phone never leaves the logo "M" .. and if I install CM10-Nightly-mb525 the phone is stuck in "cyanogen logo"
I've tried making various wipes .. the normal boot ... by custom boot without success ..
Not to mention that I'm still with the problem of direct restart the phone.
Click to expand...
Click to collapse
staff
Trying to solve the problem I reported, I tried this:
http://forum.xda-developers.com/showthread.php?t=1923855
However whenever I update the kernel, it gives a black screen coming in direct firmware upgrade with "Err, A5 ...":crying::crying:
So with que, I need to go back to step 2 Which is to defy the firmware upgrade file (rooted room. Returning, I fall into the same problem I reported .. Eternal Logo Motorola, or Multiple reboots.
Talking about multiple reboots, tried unsuccessfully this tutorial:
http://forum.xda-developers.com/showthread.php?t=1923855
alex.p.mahmud said:
staff
Trying to solve the problem I reported, I tried this:
http://forum.xda-developers.com/showthread.php?t=1923855
However whenever I update the kernel, it gives a black screen coming in direct firmware upgrade with "Err, A5 ...":crying::crying:
So with que, I need to go back to step 2 Which is to defy the firmware upgrade file (rooted room. Returning, I fall into the same problem I reported .. Eternal Logo Motorola, or Multiple reboots.
Talking about multiple reboots, tried unsuccessfully this tutorial:
http://forum.xda-developers.com/showthread.php?t=1923855
Click to expand...
Click to collapse
I installed a customized version:
CM9-NIGHTLY-Defy-121116
And this happened:
* The first time was more than 5 minutes at Cyanogen logo and not charged;
* I removed the battery, waited a bit and then called .. al entered the Android .. I was very happy when I first saw one andoid 4.0 and also on entering settings and see that the name of the phone is MB525 .. however when it restarted tinker a bit ..
* After reboot, it got stuck again in the Cyanogen logo. I removed the battery .. I waited a bit and then charged;
* After loading test the camera was OK, tested the WIFI and it does not work!;
I believe this is the way .. install a custom rom and fix all possible problems that will have as Camera, GPS, Bluetooth.
What is the rom the MB525 which is more stable?
jalal-jap said:
Try This :
http://forum.xda-developers.com/showthread.php?t=2318453
Click to expand...
Click to collapse
I tried this procedure but unfortunately not defy the advances in bootloader. Another night without success ...:crying::crying::crying::crying:
flash BL7 SBF.
http://forum.xda-developers.com/showthread.php?t=966537
---------- Post added at 12:36 PM ---------- Previous post was at 12:28 PM ----------
flash any custom kernel Rom ( My --> Slim kat 4.4.2 ).
Before Reboot connect your phone to PC OR Charger
Here your defy Wont reboot.
then install rootexplorer apk.
go to system folder--> find battery state .bin
Set permission and chek all square.
battery always show 100%.
But Your phone wont restart any more.
jalal-jap said:
flash BL7 SBF.
http://forum.xda-developers.com/showthread.php?t=966537
---------- Post added at 12:36 PM ---------- Previous post was at 12:28 PM ----------
flash any custom kernel Rom ( My --> Slim kat 4.4.2 ).
Before Reboot connect your phone to PC OR Charger
Here your defy Wont reboot.
then install rootexplorer apk.
go to system folder--> find battery state .bin
Set permission and chek all square.
battery always show 100%.
But Your phone wont restart any more.
Click to expand...
Click to collapse
I can BL7 flashing the firmware and the phone connects normally .. the problem is that it does not work wifi, it makes connections and has many problems.
I'm trying to install one of the custom room MB525, to see if the problem actually .. so I'm currently experiencing various custom roons CM7 CM9 and CM10 ... .. Today I managed to run a CM10 .. But to advance the initial setup it gives error.
alex.p.mahmud said:
I can BL7 flashing the firmware and the phone connects normally .. the problem is that it does not work wifi, it makes connections and has many problems.
I'm trying to install one of the custom room MB525, to see if the problem actually .. so I'm currently experiencing various custom roons CM7 CM9 and CM10 ... .. Today I managed to run a CM10 .. But to advance the initial setup it gives error.
Click to expand...
Click to collapse
Hello to all .
In particular the user avi_tandel conversation I managed to evolve a bit more and now have a phone with Android 4 ( CM10 ) .
So with that, I will explain here for those who are going through what I went through, how to get out of this problem
Step 1 - Install Rom BL7
I installed the rom ( 1 - DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF) that is in the link:
http://sbf.droid-developers.org/phone.php?device=27
Step 2 - Install a Rom Rooted
I installed this one , the post below :
http://forum.xda-developers.com/showthread.php?t=1595013
Step 3 - Wipe Data / Cache
Step 4 - Turn off your phone and see if it is charging the phone if yes .. leave the phone with 100 % load
Step 5 - Load Firmware Booted , skip the initial setup and habilte the USB Debugging option.
Step 6 - Via computer, install the 2nd Int
Step 7 - Restart the phone and when the blue LED appears, press Volume ( - )
Step 8 - Ext3 format ;
Step 9 - Wipe Data / Cache / Cache Davil
Step 10 - Install a custom Rom CM10 - 20120924 - NIGHTLY - mb525.zip
Step 11 - Install the GAPPS GAPPS gapps_update_2.3.5 - signed.zip
Step 12 - Reboot the machine and wait a long boot will be done (somewhere around 5-10 minutes). Important .. if the player does not leave the logo "M", turn off your phone, connect to the universal charger and wait to get up to 100% again. Then repeat the steps 7,8,9,10 and 11.
Step 13 - Your phone will load the Android 4.0, test all the features to make sure it's right.
Me I tested successfully:
* Camera photo and video;
* Sound recording;
* Wifi;
* GPS;
However I am facing some problems, I would like to see if it went through and how it resolved:
* Lots of slow to start and to use the telephone;
* Problems finding the band/net (can not make calls and send sms);
* Reset the device, the device restarts During the bootloader or after open Android;
* Catching some google apps;
Does anyone have any solution to some of my problems?
Thanks in advance:fingers-crossed::fingers-crossed::fingers-crossed:
Why are you installing an antique rom? Get the latest from the thread(quarx2k.ru, 30th October). Also format to ext4. Use baseband switcher in defy parts in settings for network. I did not understand "catching some Google apps"
Sent from my MB526 using Tapatalk
maybe u should wipe system in twrp recovery.(dont reboot after wipe)
then Flash rom
thekguy said:
Why are you installing an antique rom? Get the latest from the thread(quarx2k.ru, 30th October). Also format to ext4. Use baseband switcher in defy parts in settings for network. I did not understand "catching some Google apps"
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
You say to install this rom?
http://quarx2k.ru/cm10-2ndboot-nightly-defy (+) / cm-NIGHTLY 10-20131030-mb526.zip
She is not only DEFY (+) MB526? For this I installed another rom ...
About baseband, I think I know what it is .. roted as the firmware that is installed Chinese it comes configured with the wrong baseband. I just still can not test because the phone is restarting all the time.
About "Catching some google apps", some googles apps like maps, search, are giving error.
jalal-jap said:
maybe u should wipe system in twrp recovery.(dont reboot after wipe)
then Flash rom
Click to expand...
Click to collapse
How do I do this?
alex.p.mahmud said:
You say to install this rom?
http://quarx2k.ru/cm10-2ndboot-nightly-defy (+) / cm-NIGHTLY 10-20131030-mb526.zip
She is not only DEFY (+) MB526? For this I installed another rom ...
About baseband, I think I know what it is .. roted as the firmware that is installed Chinese it comes configured with the wrong baseband. I just still can not test because the phone is restarting all the time.
About "Catching some google apps", some googles apps like maps, search, are giving error.
Click to expand...
Click to collapse
Model is irrelevant for recent roms. First, format to ext4(no reboot). Wipe system, data and cache before flashing rom and gapps.
Sent from my MB526 using Tapatalk
thekguy said:
Model is irrelevant for recent roms. First, format to ext4(no reboot). Wipe system, data and cache before flashing rom and gapps.
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
Oh my god ... there is no miracle to make this my phone work. :crying::crying::crying::crying::crying::crying:
I tried exactly what happened and said several things:
* Bootloader caught in the logo "M";
* Boot Loop, always to shine brighter the logo cyanogem;
* Charged the system, but it did not work Wifi and a message appeared saying that the phone was faulty and needed to be rebooting. After this, I restarted the phone and the same message appeared. After skipping the initial settings of android, the phone keeps resetting ..
I'm desperate .. already spent several thoughts about this phone, how to break it, burn it, stepping on top, throw on the wall, among others .. but I managed to keep me calm and believed that one day I will fix this unit. :angel::angel::angel:
Help me please .. I know that the options are not exhausted!
Data wipe from stock recovery, use minimal gapps( banks core gapps(the smallest size) and the correct one for your android version). If data reset occurs on ext4 after a clean install(no boot loop) then it must be a hardware problem
Sent from my MB526 using Tapatalk
thekguy said:
Data wipe from stock recovery, use minimal gapps( banks core gapps(the smallest size) and the correct one for your android version). If data reset occurs on ext4 after a clean install(no boot loop) then it must be a hardware problem
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
Hey .
I did exactly what you said and now unable to run the system .
I am however a problem with the system displays the following message :
Telephony problem
A problem was detected in the phone 's telephony later . a reboot of the phone is required to repair the phone state . What do you want to do?
Perhaps for this reason , can not make calls and use 3g .
With regard to the problem of links tried updating the baseband using the file ( bbsV4.0mlV0.7.zip )
I selected multiple carriers ( Brazil ) and did not work .
I read on some forums that the " telephony problem" was enough to wipe cache and cache davil ... did not work .. but ..
The great news is that for now the phone is not restarting ..
And unfortunately , just broken my LCD , I'll have to buy another .. I left the device with the Motorola logo about 2 hours to see if it started .. and this has made the lcd generate a patch of dead pixels .
If anyone has any tips to solve the problem of this message help me !
Try a different rom, like cm 7. Start from sbf, and use the gapps from the cm7 thread. Try the freezer method to get rid of dead pixels
Sent from my MB525 using Tapatalk
thekguy said:
Try a different rom, like cm 7. Start from sbf, and use the gapps from the cm7 thread. Try the freezer method to get rid of dead pixels
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
Hello to all .
Took me to post something because I wanted to test the most of the options that were given to me here in this forum .
I did the freezer method is unable to get a little touch of the damage . But still some stains .. unfortunately I will have to buy another . (No problem ) .
I tried to install CM7 as was instructed and managed for once to configure and test a few things that worked as WIFI , CAMERA , CAMCORDER ..
But .. as well as other customs roms , the problem of eliminating the logo " M" or keep restarting remains .
To be honest , I can only do something about this phone as follows :
* The night he let Loading and off for 10 hours or more;
* When you wake up and turn on my phone for about 2 .. 5 minutes I can do something .. eg rootting or start a custom rom that crashed in Cyanongen soon .
I made some videos to show rather than going to .. and as a result , once you've installed custom one room again , I'll make another video .
https://drive.google.com/file/d/0Bz5W5nUB8BfUR1hMWi1fY0hfV2s/edit?usp=sharing (53 MB)
First video shows the installation of the Chinese ROM :
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF
Realize that the process does not occur naturally , disconnect the phone and rsd lite never completes the process :
https://drive.google.com/file/d/0Bz5W5nUB8BfUZmlhSGhsX0hoR2s/edit?usp=sharing (58 MB)
In the second video , I show the installation of the rooted rom :
firmware.sbf
The result is similar to the first video .
https://drive.google.com/file/d/0Bz5W5nUB8BfUcHFEZlhVYUZ5Zms/edit?usp=sharing (22 MB - Play Online)
In the third video , I show a major problem, just stop in M. Notice that I can not do easily wipe .. wait only a few hours after the phone is 100 % charged .:crying::crying::crying:
https://drive.google.com/file/d/0Bz5W5nUB8BfUU2cyaURnSjZGYkE/edit?usp=sharing (28 MB)
In the fourth video, after waiting a bit, I managed to get into the stock recovery. Do wipes and restart the phone .. and as always .. does not work..Will only work if you leave the phone still loaded .. all night ..
I'm beginning to think that this phone is something physical, maybe a problem on the motherboard.