Database Users

Need serious help - to get my phone back to work

Hi,
My DHD is not working after a update.
I am not sure what to do now...
I have cyanogenmod 7 and When I bought it it was rooted and with S-OFF.
Today I would try to get mod with Sense 3.0 on My phone.
Actually I will get it back to Factory settings, but I not know how to go on now...
It starts up and run into the boot picture with the cyanogenmod 7 and stops and start over countiuosly.
Please help me to get further.

I got it back to work, but are there someone who can help me to get it like this
htc product legend
with the clock and the dock.

Welcome to XDA mate.
You have to know some basic stuff before flashing any ROM.
1. ClockworkMod recovery and how it works.
2. Find a ROM that you like and download it.
3. Follow the instructions written on that ROM for flashing via ClockworkMod recovery and you are done.
If you are looking for stock HTC look, you must download a Sense ROM (CyanogenMod is an AOSP ROM) and there are many of them. I would suggest reading from this post, it helped me a lot when I was new to the android scene.
If you have any questions please post here and I am sure people would be happy to help.
Remember... Search function is your friend here in XDA.
Cheers

Oh, yhea - what link you gave me there, thanks.
Could you please guide me throw my first mod. I have desited it should be this one
http://forum.xda-developers.com/showthread.php?t=1056727
Kernel - LeeDrOiD V3.2.1 - 2.6.35.13 Revised - BFS
You problably know the first time, you do this it a good ide to have some back up from anotherone who have try it before...

1.Download all files mentioned below and copy them to the root of your SD card
a. Wipe file
b. Rom File
2. Boot to ClockworkMod recovery
3. Backup your current Rom to your SD
4. Flash the Wipe file (Install Zip file from SD card option)
5. Flash the Rom file (Install Zip file from SD card option)
6. Eat a donut! (aka wait for 10-15mins)
7. You should be done.
If things go wrong, you can always restart in ClockworkMod recovery and restore your previous Rom.
Cheers

I made a nandroid with ROM Manager, and now when I need to restore it, CWM says MD5 mismatch. What did I do wrong?

ViDtje said:
I made a nandroid with ROM Manager, and now when I need to restore it, CWM says MD5 mismatch. What did I do wrong?
Click to expand...
Click to collapse
Hmmm did you attempt to move or edit the nandroid backup? As far as I can tell, if you have nothing to boot too, then your best bet would be the same as instructions below, to boot recovery, mount sd, put new rom on there super wipe, and flash new rom
Thanks button always appreciated!

naailalzuhir said:
1.Download all files mentioned below and copy them to the root of your SD card
a."Not allowed ex link"
b. "Not allowed ex link"
2. Boot to ClockworkMod recovery
3. Backup your current Rom to your SD
4. Flash the Wipe file (Install Zip file from SD card option)
5. Flash the Rom file (Install Zip file from SD card option)
6. Eat a donut! (aka wait for 10-15mins)
7. You should be done.
If things go wrong, you can always restart in ClockworkMod recovery and restore your previous Rom.
Cheers
Click to expand...
Click to collapse
Ohh, how easy it was. Tanks a lot. That was great you could simplyfied it to that level.

I think it went wrong because I did it with ROM manager. Recovery, it all went right.
Sent from my Desire HD using xda premium

ViDtje said:
I made a nandroid with ROM Manager, and now when I need to restore it, CWM says MD5 mismatch. What did I do wrong?
Click to expand...
Click to collapse
Md5 mismatch means that image is likely to be corrupt.
Google and download the md5 checker s/w. Check the md5 hash with the one posted on the forum/website where you are downloading the image.
If needed redownload the image and check the md5 hash again.
Once the md5 hashes match you may proceed flashing the image on to the phone.

[Recovery] Unofficial CWM Recovery 5.0.2.7[u8800pro&u8800]

I take no responsibility for any harm that comes to your phone as a result of applying this mod.
unofficial Clockwork Mod Recovery 5.0.2.7 for u8800pro and u8800 [upgrade to offical 2.3 GB]
Installation Instructions (upgrading - root explorer method):
Using any file explorer which is able to remount as writeable (such as root explorer), browse to the /cust_backup directory and remount it as writeable
Navigate to the image directory and backup up the current recovery by renaming it to something like recovery.bak, or _recovery.img
Rename the downloaded recovery to recovery.img and copy to the image directory.
Installation Instructions (new install):
Unplug any usb connection and turn the phone completely off
Whilst holding both the volume + and volume - keys hold the power button to turn the device on. Let go when you see a pink/purple screen.
Attach the usb cable to your computer and wait until a few usb mass storage devices are detected and mounted. Look for one that has just one directory called 'image' in it. Navigate into this directory and you'll see recovery.img etc.
(optional) Rename recovery.img to recovery_backup.img
copy the new recovery.img to image, unmount the mass storage device (safely remove in windows) and then pull the battery out to turn the phone off.
Hold volume + and power to boot to recovery.
Install any custom rom
change：
mod the kernel,Ums is worked now
use zte u880‘s charge png
can install zip from emmc and use emmc backup&restore
add ext4 fs support
about SDcard
if you can't mount SDcard in recovery,do this:
enter "advanced"--"Reboot Recovery"
then you could use the SDcard
ps:this is issue of offical GB,not recovery!
Download
http://sourceforge.net/projects/genoandroid/files/

mount sd_external error!

akalos said:
mount sd_external error!
Click to expand...
Click to collapse
have detailed info？
my worked fine

genokolar said:
have detailed info？
Click to expand...
Click to collapse
I tried to backup my rom to the external storage card,but was not possible
internal is ok

akalos said:
I tried to backup my rom to the external storage card,but was not possible
internal is ok
Click to expand...
Click to collapse
test it ,work fine for me

akalos said:
I tried to backup my rom to the external storage card,but was not possible
internal is ok
Click to expand...
Click to collapse
I have same problem!

please upload the recovery.log

Did you finally find out if there is a bug in the recovery?
Once you put the recovery, would Rom Manager detect it?

Copix said:
Once you put the recovery, would Rom Manager detect it?
Click to expand...
Click to collapse
no
10 digits

Got it. Unofficial...

Tested on u8800 and works very good. SD card sometimes can't mout properly, but i guess it's not an issue from CMW.
I've done a official GB backup, restored without a glitch, installed ICS demo without any problem too.

Can I upgrade my u8800 to official beta 2.3.5 and use this CWM to upgrade to cm7 or miui if I won't be able to use ics demo?
Sent from my u8800 using XDA App

Yes.
Sent from my ragelis

for me does not work. after several times trying to restore my miui backup (the onlyy one) it gave random errors some times, but after I was able to restore 2 times, I cant pass the miui boot.

MaRcIuPT said:
for me does not work. after several times trying to restore my miui backup (the onlyy one) it gave random errors some times, but after I was able to restore 2 times, I cant pass the miui boot.
Click to expand...
Click to collapse
Was it a backup you did with this CWM version? Or with the stockwell's CWM? The old backups don't work with this one I believe.

the backup its before this version of course. but even with this new CWM I cant flash new rom. I says error blablabla id u8800pro. I installed this because I wanted to try new ICSrom but now Im stuck to it lol

MaRcIuPT said:
the backup its before this version 4 of course. but even with this new CWM I cant flash new rom. I says error blablabla id u8800pro. I installed this because I wanted to try new ICSrom but now Im stuck to it lol
Click to expand...
Click to collapse
Have you flashed official GB before installing this recovery? I think you need to do that before this works in the original U8800.

yes I did ! the ICS works but not others.

Hmm, I tried to restore my backup from yesterday done with stockwells 5.0.2.6 recovery and my phone got ****ed up. I know I shouldn't have done this but I just had to try. xD Now I can't get past the Huawei logo, when I push the power the phone starts but just turns off after couple of seconds. I can get to bootloader (pink screen) but not to recovery. I hope no one else has tried this and I hope I get my phone working again.
Would anyone have any advice how to get my phone back up and running? Or should I just go bring it to warranty support?

have you tried to replace the recovery.img from this topic again? that happened to me too when I tried to go back with CWM v4 but then I replaced with this

[Q] Can I install a firmware through SD Card?

Hi,for some reasons I can't get Odin to work properly.I have B5510JPKJ4 firmware and I want to install it into my samsung Galaxy Y Pro gt-b5510.
Is there any solution to convert this firmaware into .zip or something else to make it installable through SD Card?
The firmware got these 3 files:
DefaultCalDataWithBoot_B5510JXKJ1_REV03.tar.md5
FOTA_AP_B5510JPKJ4.tgz
FOTA_CSC_B5510OJPKJ1.tgz
Or can I simply add .tgz files into SD Card and install them through recovery mode?
help plsss

rocky450 said:
Hi,for some reasons I can't get Odin to work properly.I have B5510JPKJ4 firmware and I want to install it into my samsung Galaxy Y Pro gt-b5510.
Is there any solution to convert this firmaware into .zip or something else to make it installable through SD Card?
The firmware got these 3 files:
DefaultCalDataWithBoot_B5510JXKJ1_REV03.tar.md5
FOTA_AP_B5510JPKJ4.tgz
FOTA_CSC_B5510OJPKJ1.tgz
Or can I simply add .tgz files into SD Card and install them through recovery mode?
help plsss
Click to expand...
Click to collapse
http://www.mediafire.com/?x8hpnd1mxdv4j44
use ^ this link
then boot into cwm recovery
then given link is a recovery of DDLE1
restore it
u r done
stock firmware with out odin
HEY, PRESS THANKS I HELPED YOU

Many thanks for your help,I didn't find this file on the net.
One more question, Is this update deletes all the files (including SD card)? Also,do I need to make a backup using apps like Titanium backup?.
waiting your reply

no it cant delete the sd file
your data in phone- like apps,contact
all will erase
but nothing with sd card

there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet

rocky450 said:
there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet
Click to expand...
Click to collapse
Did you used stock recovery or cwm you have to use cwm
Sent from my GT-S5360 using XDA

I have rom manager then I press reboot phone in cwm but it keeps running in stock recovery!

use cmw recovery and first clear your data
atleat your device having 120 mb free space or more......

cwm
use attachment
flash it in stock recovery
DONT SHY, JUST PRESS THANKS

CWM Restore!
rocky450 said:
there is an error during installation,it tells me cannot open package.zip!
any solution plz? Does it require enough space in SD card because I have only 40MB of free space!
Don't worry my phone is not bricked yet
Click to expand...
Click to collapse
Save CWM by skin1980 in the root of sdcard(/sdcard)
Save the DDLE1 backup u got here nd save it in sdcard.. the backup will be saved in a folder which has a path similar to /sdcard/clockworkmod/backup/2012-03-09.17.40.45/
Then Restart into stock recovery
Install the zip(Skin1980 zip)
CWM will open up(Yellow fonts)..
Select backup&restore>restore
If u hv saved in correct location as I stated.. U'll get that in the list..
Select it.. pick yes restore...
It'll take hardly 5-10mins
Enjoy!!

NeelDroid said:
Save CWM by skin1980 in the root of sdcard(/sdcard)
Save the DDLE1 backup u got here nd save it in sdcard.. the backup will be saved in a folder which has a path similar to /sdcard/clockworkmod/backup/2012-03-09.17.40.45/
Then Restart into stock recovery
Install the zip(Skin1980 zip)
CWM will open up(Yellow fonts)..
Select backup&restore>restore
If u hv saved in correct location as I stated.. U'll get that in the list..
Select it.. pick yes restore...
It'll take hardly 5-10mins
Enjoy!!
Click to expand...
Click to collapse
Followed these steps but it tells me "MD5 Mismatch!"

Ok installed the rom and everything is working fine (widgets,status bar,apps etc...) except my keyboard!! It is a firmware for samsung s5360 not a firmware for my Galaxy Y Pro b5510!
is there a specific rom for this phone?
thx for the help

helpppp
dont pass of Restoring data...

CAn i install firware from sd card if phone is bricked
hello!! sir my phone is bricked...can I install firmware with sd card I have firware with scatterd file ...pls help me sir...

arpitraj456 said:
hello!! sir my phone is bricked...can I install firmware with sd card I have firware with scatterd file ...pls help me sir...
Click to expand...
Click to collapse
if you can get into recovery mode you can either
1. restore a nandroid backup
2. format system data cache - mount system data cache - flash a custom rom zip
if you cant get into recovery mode then go into download mode and flash stock rom via odin (requires a pc)

phone is bricked !!Lol!
Sir..I have xolo a600 .I am trying to install chainfire 3d and apps need to reboot and after reboot my mobile can open. just hanging in logo (just like xolo) :crying: and I install the firware with sp flash tool but my mobile `s board is not working properly when I am trying to install the driver of xolo .my mobile`S PORT IS not shown....pls help me sir..Can You tell me which way I can install my firware with sd card...pls tell me..I
have go in recovery mode and click on apply update from sd card but ,my sd card not showing..and phone`s memory is showing...pls help me sir how can I install firware.....:silly: I kindly requested you sir...

arpitraj456 said:
Sir..I have xolo a600 .I am trying to install chainfire 3d and apps need to reboot and after reboot my mobile can open. just hanging in logo (just like xolo) :crying: and I install the firware with sp flash tool but my mobile `s board is not working properly when I am trying to install the driver of xolo .my mobile`S PORT IS not shown....pls help me sir..Can You tell me which way I can install my firware with sd card...pls tell me..I
have go in recovery mode and click on apply update from sd card but ,my sd card not showing..and phone`s memory is showing...pls help me sir how can I install firware.....:silly: I kindly requested you sir...
Click to expand...
Click to collapse
cant help you because this forum is for the galaxy y gt-s5360
I have no knowledge of your device - Goto your own phones forum if it has one or the xda question and answer section for non specific phones if it doesnt

my phone is stop during installation and it says that "error mounting data ! " what should I do ? please I need your help

NosHIRoU07 said:
my phone is stop during installation and it says that "error mounting data ! " what should I do ? please I need your help
Click to expand...
Click to collapse
What are you trying to install
Can you manually mount data in CWM?
Did you format data in CWM and then try to mount it?
Are you using the correct cwm?
Is it formatted in the correct file system for your kernel? Rfs/ext

please help me to upgrade firmware of lenovo tab a1000g from sd card
please help me to upgrade firmware of lenovo tab a1000g from sd card

[Q]problem with instaling rom, it wont go ahead of "ideos" splash screen

hi everyone!
i got this problem when i tryed to instal a custom rom...
i rooted the phone then i instaled clockworkMOD and then i make the backup with CWM and titanium backup.
then i done the terrible mistake of coping the backup i made with CWM to my pc and then i erased it from cell,
to free some space, after coping the MIUI rom to the cell i did wipe data and reset factory seeting and wipe cashe as well as
devk cache, and then i instaled the rom zip and did reset, and it didnt pass the IDEOS splash screen.
due to this how can i restore the cell or istal other rom?
how do i access the root of the cell?
is it recuperable?
here the links i used:
guide to instalation -> http://huaweiideosx5u8800.blogspot.pt/2012/01/installing-custom-roms.html
MIUI rom -> http://forum.xda-developers.com/showthread.php?t=1690156
thank you and apretiated!
sorry for bad english..

If you're originally coming from Stock ROM Froyo no wonder why it did not work. You have to upgrade first to Official Gingerbread before installing this particular Custom ROM as the kernel is different.
Your solution is to get back to Stock ROM Froyo. Get it from here http://forum.xda-developers.com/showthread.php?t=1167882
And do the installation as described here http://forum.xda-developers.com/showthread.php?t=1011527

Go CWM -> mounts and storage -> mount USB storage and copy backup to your phone.
Sent from my GT-P1000 using Tapatalk 2

ty
eksuka said:
If you're originally coming from Stock ROM Froyo no wonder why it did not work. You have to upgrade first to Official Gingerbread before installing this particular Custom ROM as the kernel is different.
Your solution is to get back to Stock ROM Froyo. Get it from here http://forum.xda-developers.com/showthread.php?t=1167882
And do the installation as described here http://forum.xda-developers.com/showthread.php?t=1011527
Click to expand...
Click to collapse
my cell is portugal TMN and i dont find stock rom anywhere but im wiling to try it...
searched on links u gave me and modaco wiki seems to be ofline dunno?
in step 2 we r talking about an external sd card right?
Qqqxxxzzz said:
Go CWM -> mounts and storage -> mount USB storage and copy backup to your phone.
Sent from my GT-P1000 using Tapatalk 2
Click to expand...
Click to collapse
i try this way too but it says " E:Unable to write to ums lunfile (No such file or directory)"
ty for helping...

SOLVED
thank you for our help...
i got did update it with a stock rom and worked
just had to buy external sd wich i didnt had... :silly:
thank you again...
now i can show off how i could bring my cell from the dead... xD
next time i will try to be more carefull xD

Help! CWM not installed properly?! Bricked devices?

Hi folks,
5 day ago i rootet my tablet 16GB WE and installed Koshu`s CWM step by step like discribed in his threat [http://forum.xda-developers.com/showthread.php?t=1831161]. At the end there was an error message..., i was too quick and made an reboot bevor i could read it.
But i tested if i rooted the tablet succesfully and the superuser-app said that i am root now....
Then i installed the v.0.8.1 Version and everything was fine!
a few days later i got reboots during normal use.
Now i cant boot in the OS, there are bootloops the hole time.
I think that i have not installed the CWM correct...
Any ways to check this with adb commands or something else?
It would be great if someone could help me....
Sorry for my bad english!
Thomas

tpauli said:
Hi folks,
5 day ago i rootet my tablet 16GB WE and installed Koshu`s CWM step by step like discribed in his threat [http://forum.xda-developers.com/showthread.php?t=1831161]. At the end there was an error message..., i was too quick and made an reboot bevor i could read it.
But i tested if i rooted the tablet succesfully and the superuser-app said that i am root now....
Then i installed the v.0.8.1 Version and everything was fine!
a few days later i got reboots during normal use.
Now i cant boot in the OS, there are bootloops the hole time.
I think that i have not installed the CWM correct...
Any ways to check this with adb commands or something else?
It would be great if someone could help me....
Sorry for my bad english!
Thomas
Click to expand...
Click to collapse
You can still boot into CWM? Well you could make a backup of the installed recovery (like shown in the CWM thread) and check if the md5sums are equal to the downloaded image. Btw. linebreaks in the logcat would really help reading it

Koshu said:
You can still boot into CWM? Well you could make a backup of the installed recovery (like shown in the CWM thread) and check if the md5sums are equal to the downloaded image. Btw. linebreaks in the logcat would really help reading it
Click to expand...
Click to collapse
yes i can Boot into CWM, but i cant restore my backup. I tried to install cm10 clean again but after rebooting CWM and booting the OS Android is updating the apps. But i did a full wipe bevor.Thats why i think that the CWM is not in an good state.
i am in the road and maybe i can later check the md5sum.
I can attach an picture from the CWM during trying formating and fixing permissions.
thank you!

Problem solved
tpauli said:
yes i can Boot into CWM, but i cant restore my backup. I tried to install cm10 clean again but after rebooting CWM and booting the OS Android is updating the apps. But i did a full wipe bevor.Thats why i think that the CWM is not in an good state.
i am in the road and maybe i can later check the md5sum.
I can attach an picture from the CWM during trying formating and fixing permissions.
thank you!
Click to expand...
Click to collapse
Koshu helped me! The problem was, that my data partion was read only and my wipes befor and installs was more or less unusefull!
Big thanks to koshu!!!!!

tpauli said:
Koshu helped me! The problem was, that my data partion was read only and my wipes befor and installs was more or less unusefull!
Big thanks to koshu!!!!!
Click to expand...
Click to collapse
Hi. I have the same Problem. Can you tell me how Koshu helped to fix the problem.
the checksum and stuff. thx

florian1985 said:
Hi. I have the same Problem. Can you tell me how Koshu helped to fix the problem.
the checksum and stuff. thx
Click to expand...
Click to collapse
I linked a zip file in the CM10 Thread that formats the data partition: http://forum.xda-developers.com/showthread.php?t=1846044
You can find it in the "addition steps" section. Beware that it will delete all your personal data including the internal sd-card (also nandroid backups if you have stored them on the internal sdcard). So make sure you have EXTERNAL backups if you want to keep some of the data.

I have same problem
After install CM10 ,my TPT cant boot
I turn on My tablet and see loop forever logo : Lenovo ==> CyanogenMod....
Please help me, how to fix it ????

cachlanhuong said:
I have same problem
After install CM10 ,my TPT cant boot
I turn on My tablet and see loop forever logo : Lenovo ==> CyanogenMod....
Please help me, how to fix it ????
Click to expand...
Click to collapse
I have nearly the same problem.
I rooted my TPT a few weeks ago, today I was reading about Cyanogen and decided to install CWM. After some issues with the adb drivers, I managed to install the clockwork recovery.
Now I followed the steps from the cm-thread. I did a nandroid backup and wiped my tablet. After that, I flashed CM10. But all I get is the CyanogenMod logo spinning around.
I tried to go back to my nandroid backup, but it seems broken somehow.
I also tried several several CM-versions and downloaded them several times, without success. But I realised, that the installation procedure of CM was very quick, too quick maybe? Could it be that my clockworkmod isn't installed correctly, because the installation of CM and the nandroid backup won't work.
I hope you guys can help me out. Because I only could find nandroid backups for ROW and US version. I also don´t have adb access anymore.
TPT 16GB 3G WE

Ottilooping said:
I have nearly the same problem.
I rooted my TPT a few weeks ago, today I was reading about Cyanogen and decided to install CWM. After some issues with the adb drivers, I managed to install the clockwork recovery.
Now I followed the steps from the cm-thread. I did a nandroid backup and wiped my tablet. After that, I flashed CM10. But all I get is the CyanogenMod logo spinning around.
I tried to go back to my nandroid backup, but it seems broken somehow.
I also tried several several CM-versions and downloaded them several times, without success. But I realised, that the installation procedure of CM was very quick, too quick maybe? Could it be that my clockworkmod isn't installed correctly, because the installation of CM and the nandroid backup won't work.
I hope you guys can help me out. Because I only could find nandroid backups for ROW and US version. I also don´t have adb access anymore.
TPT 16GB 3G WE
Click to expand...
Click to collapse
Koshu helped me!
I linked a zip file in the CM10 Thread that formats the data partition: http://forum.xda-developers.com/showthread.php?t=1846044
You can find it in the "addition steps" section. Beware that it will delete all your personal data including the internal sd-card (also nandroid backups if you have stored them on the internal sdcard). So make sure you have EXTERNAL backups if you want to keep some of the data.

tpauli said:
Koshu helped me!
I linked a zip file in the CM10 Thread that formats the data partition: http://forum.xda-developers.com/showthread.php?t=1846044
You can find it in the "addition steps" section. Beware that it will delete all your personal data including the internal sd-card (also nandroid backups if you have stored them on the internal sdcard). So make sure you have EXTERNAL backups if you want to keep some of the data.
Click to expand...
Click to collapse
But how can formatting my data partition help? You mean after a format, the installation of cm would work?
And how do I use the .zip, just flashing with cwm?

Ottilooping said:
But how can formatting my data partition help? You mean after a format, the installation of cm would work?
And how do I use the .zip, just flashing with cwm?
Click to expand...
Click to collapse
You have to download the formatdata.zip on your external sd-card.
After that you can boot in the recovery and flash this .please dont juse the cwm! Do you know how to boot into the recovery?
Power on and during that you should drop-down the volume + key a few seconds.
This helped me and others.
Please read in this threat: http://forum.xda-developers.com/showthread.php?t=1831161

tpauli said:
You have to download the formatdata.zip on your external sd-card.
After that you can boot in the recovery and flash this .please dont juse the cwm! Do you know how to boot into the recovery?
Power on and during that you should drop-down the volume + key a few seconds.
This helped me and others.
Please read in this threat: http://forum.xda-developers.com/showthread.php?t=1831161
Click to expand...
Click to collapse
But I have no recovery anymore. The cwm replaced the "normal" recovery.

Ottilooping said:
But I have no recovery anymore. The cwm replaced the "normal" recovery.
Click to expand...
Click to collapse
Send me an photo from your "recovery"...

tpauli said:
Send me an photo from your "recovery"...
Click to expand...
Click to collapse
https://www.dropbox.com/s/xl9fx8rb8bpqgkf/IMG_20130212_110830.jpg
Here is the photo.
I was thinking about 2 possible solutions right now.
1. get another nandroid backup (Problem didnt see any for the 16gb WE version)
2. try no reflash another CWM version or maybe ventana cwm and try again to flash Cyanogen (don't know if its possible to just flash another recovery as an image with the current working recovery)
So what do you guys think?

Ottilooping -
You were running ICS before flashing to CM, right?

da_reeseboy said:
Ottilooping -
You were running ICS before flashing to CM, right?
Click to expand...
Click to collapse
Yes, thats correct.

Ottilooping said:
https://www.dropbox.com/s/xl9fx8rb8bpqgkf/IMG_20130212_110830.jpg
Here is the photo.
I was thinking about 2 possible solutions right now.
1. get another nandroid backup (Problem didnt see any for the 16gb WE version)
2. try no reflash another CWM version or maybe ventana cwm and try again to flash Cyanogen (don't know if its possible to just flash another recovery as an image with the current working recovery)
So what do you guys think?
Click to expand...
Click to collapse
That looks good!
My suggestion: Flash the formatdata.zip and than install the last v0.9.2 from koshu located here: http://forum.xda-developers.com/showthread.php?t=1846044
I was coming from ics too.

Problem solved. CM is running. Thanks for your help, exspecialy to you tpauli.
The formatdata.zip was the key
One last question. I am using the folio keyboard with an european layout (qwertz), but with Cyanogen it is us layout (qwerty). How can I change this?