before flash Singha ROM ICS P6800DXLP7....im using zeta rom 4.0,but aftet i change to Singha ROM ICS P6800DXLP7 i have s big problem ...the usb connection is no working...but after i flash back to zeta 4.0 everything fine for me....may i know what is the solution usb connection for Singha ROM ICS P6800DXLP7?because the rom is super smoothly...
I have used singha rom + v6 supercharge + pimp myrom by androguide. Yes it is very smooth. I followed the suggestion of singha rom dev. We had better flash it first using original stock rom dxlp7. Make sure kies recognize your device . CSC match with thl. You can use anycut.apk to get correct csc. If kies recognize your device then you can flash with singha rom. It works for me in this way.
Sent from my GT-P6800 using Tapatalk 2
pandan80 said:
before flash Singha ROM ICS P6800DXLP7....im using zeta rom 4.0,but aftet i change to Singha ROM ICS P6800DXLP7 i have s big problem ...the usb connection is no working...but after i flash back to zeta 4.0 everything fine for me....may i know what is the solution usb connection for Singha ROM ICS P6800DXLP7?because the rom is super smoothly...
Click to expand...
Click to collapse
Hi, I Think you flash Singha Light ROM not Singha ROM
BTW please use this patch for fixed it.
Download: Singha MTP Connection Patch
Thank Bro.
ParotZ said:
Hi, I Think you flash Singha Light ROM not Singha ROM
BWT please use this patch for fixed it.
Download: Singha MTP Connection Patch
Thank Bro.
Click to expand...
Click to collapse
thx...i will test in your new rom tonight
Related
hi i just want to know that i m using criskelo JVQ rom the latest one can u plz tell that i can flash any of semphore kernel on in i m planning for latest samephore kernel......plz if anyone know then give me reply
one thing i forget to mention the semaphore has only JVP kernel........i want to know that can i flash this one on my JVQ rom
Hi Ali,
You've probably read up already and found your answer but if not just know that it is good practice to only flash kernels designed for the build. IE JVP = JVP Kernel otherwise you will or can run into problems.
Hope this helps.
Samephore 1.3.0 is designed for JVQ. It should work fine.
ali_khalid5518 said:
hi i just want to know that i m using criskelo JVQ rom the latest one can u plz tell that i can flash any of semphore kernel on in i m planning for latest samephore kernel......plz if anyone know then give me reply
Click to expand...
Click to collapse
Download SGS kernel flasher from market.Safest way to flash kernel.Offcourse first disable all lagfixes.
malcho said:
Download SGS kernel flasher from market.Safest way to flash kernel.Offcourse first disable all lagfixes.
Click to expand...
Click to collapse
I rather trust odin to flash a kernel than an app ...
Why is is it the safest way?
mNiosu said:
Samephore 1.3.0 is designed for JVQ. It should work fine.
Click to expand...
Click to collapse
True, semapfore 1.3.0 here on my custom rom based on JVQ.
The only thing that bothers me is that BT doesn't work properly in combination with this kernel.
I use darkcore 2.8 now and everything is fine again.
Use Odin
[Q] hello sir,
Do own Defy+2.3.6 (ryt now using MS2Ginger 3 by walter79 ), want to use CM9/ICS, downloaded zip CM9-NIGHTLY-120112-Defy+.zip & CM9 kernel. kindly suggest proper installation procedure and info abt the ics gapps versions which one to use. i dont want to use other kernal rather than 2.3.6 can i flash CM9 on stock rom
waiting for ur humble replies ☻thanks in advance☻
God bless you All.
Why don't you want to use the Froyo kernel? I wouldn't use this nightly. You can't even phone with it! If you have BL6, flash the BL6-SBF with Froyo-kernel.
Don't use the flashlight until you flashed the CM7-kernel, you could burn it with the Chinese kernel of this SBF.
Then root the phone with the latest SuperOneClick and (after backup) follow my instructions here. Use the latest CM9-zip, ICS-Google-apps and the CM7-kernel(NOT the CM9-kernel) instead of the zips in that post. If you want to have the Motorola-Bootlogo back, also flash the attached Red_M_Logo.zip, or use my CM9-Bootlogo.zip. Flash the CM9-Music.zip if you want to use the new CM9 music app (it's very good, i can recommend it).
If you have BL7, i would wait until eppy makes a build for the Defy+ kernel.
thanks for your replies,
please let me know checking battery version ( bl5,bl6,bl7 ),my defy mfg. date is dec 2011 , details on battery HF5X, b052r984-1001, model L-L-L- DC111109.
and CM9 GB kernel is available so why not to use it, hope u clear my mind.
veeranna said:
[Q] hello sir,
Do own Defy+2.3.6 (ryt now using MS2Ginger 3 by walter79 ), want to use CM9/ICS, downloaded zip CM9-NIGHTLY-120112-Defy+.zip & CM9 kernel. kindly suggest proper installation procedure and info abt the ics gapps versions which one to use. i dont want to use other kernal rather than 2.3.6 can i flash CM9 on stock rom
waiting for ur humble replies ☻thanks in advance☻
God bless you All.
Click to expand...
Click to collapse
defy + wont be able to get update of 4.0 do not even try for this
I have a Defy+ with CM9/ICS, it works!
i think i try flashing it on my stock rom... i think eppsy build for gb builds hope no downgrading is required i guess any suggestions and recommendations are welcome.
WHAT VERSION HAVE YOU FLASHED ?
I mean which build are you using with Defy+ ?
i am using stock 2.3.6 and i tried
stock/cm 7.2 nightly.
stock/ics latest builds
works well but no network on second booted rom doesnt get any network ( no EMIE )
hope some one fix this soon or some one did let me know
veeranna said:
i am using stock 2.3.6 and i tried
stock/cm 7.2 nightly.
stock/ics latest builds
works well but no network on second booted rom doesnt get any network ( no EMIE )
hope some one fix this soon or some one did let me know
Click to expand...
Click to collapse
Did you try using basebandswitcher? Just to search for a frequency similar to your stock baseband? I think you did because default ms2ginger baseband definitely isn't what you seem to be running on stock 2.3.6...
Oh, and btdubs I think Mister Ypsilon is right about using froyo kernel builds for CM9. Your nightly doesn't seem to be too stable.
*EDIT
Oh and veeranna don't forget, BL version (BL5/6/7) is not your battery version. It's the version of the bootloader, and it is very important when it comes to downgradeability.
search it up, I don't do a very good job of explaining bootloader stuff.
Its awesome but lil buggy
I did it! Installed Froyo SBF, rooted, 2nd init, then CM9 for Defy, CM7 kernel, slept at 5A.M :O and bingo there was a pretty stable ICS but without camera! After playing around with it for few hours.. Tested NFS Shift, Angry Birds and everything was smooth as butter except that there was no Camera due to which I restored it back using a full SBF flash and my Nandroid backup
Can be used if you don't need a camera..!
I have a Defy+ flashed with stock 2.3.6 SBF en.asia
http://forum.xda-developers.com/showpost.php?p=20097916&postcount=3
Check this it is working fine. Tested on my moto after a full fresh Defy+ 2.3.6 SBF flash.
There are more stable roms built by quarx and epsylon3 in the defy development thread. Camera works and camcorder works for some users. These devs are geniuses.
Sent from my MB525 using xda premium
What is the best way and how to go back from cm9 to cm7 on my defy red lens ?
I think I still have the nandroid BU on my card. Or flash cm7 over CM9 ?
I have no idea what to do .
If you are on froyo kernel, just restore the nand.
Otherwise, first flash the froyo kernel.
Sent from my MB525 using XDA
I did the official upgrade from eclair so i think I'm on the froyo kernel ?
Did you flash a kernel zip? If not then yes.
You can always try and if it didn't work, flash any froyo ROM and restore the nand from there.
Sent from my MB525 using XDA
OK it went fine! thnx for the help!
Only some widgets don't work anymore like 3 D digital wheather clock ! Any idea ?
kernel nandroid?
zaiko2000 said:
OK it went fine! thnx for the help!
Only some widgets don't work anymore like 3 D digital wheather clock ! Any idea ?
Click to expand...
Click to collapse
Hi - thanks for the interesting post.
- why did you choose to go back from cm9 to cm7 ?
On another note:
- in what cases does the kernel get upgraded? when going from 2.1 to 2.2 to 2.3?
- does the cm7.1 to 7.2 upgrade also change the kernel?
Thanks!
there were too many bugs in the CM9 . Now I installed the MIUI rom and this is the best I used until now ! Fast, nice and no bugs ! Everything works fine!
For the kernel until now I didn't change or upgrade any kernel .
hi,which rom save battery a lot and have no any bug?
Can suggest to me?xP
thx
Hi,
I use now Evo-x2.1, its minimalistic, and use a custom kernel, like Whitexp kernel, and put on powersaving governor 156mhz - 832mhz.
Repencis 3.5 advanced rom and once installed flash the new repencis kernel - fully working no bugs
marcussmith2626 said:
Repencis 3.5 advanced rom and once installed flash the new repencis kernel - fully working no bugs
Click to expand...
Click to collapse
i want to try to flash repencisv3.5 rom , but i already in stock rom without any kernel,i failed to install it, it says installtion abordted. make me cry ><
so i try to extract the file in my computer,and the i found it the file had break,i download it from the official repencis post,try 4-5 times already,also fail.
Any solution? =]
stock odex rom
Hyperion Rom Gold Edition .. best ROm!
but hyperion WIFI problem can be fix?
Sent from my GT-S5360 using xda app-developers app
Use jellyblady v3 the best rom for sgy ever and it has a custom kernel (kuro kernel) it saves battery and has 3g tweaks
sent from my GT-S5360 galaxy y running on jellyblast 3.0.3(jellybean) using XDA Premium
waikit2012 said:
but hyperion WIFI problem can be fix?
Click to expand...
Click to collapse
Yes. it can be fix. Go to HYPERION 7 GM's Thread scroll down and find the troubleshooting guide for wifi and network fix.
waikit2012 said:
i want to try to flash repencisv3.5 rom , but i already in stock rom without any kernel,i failed to install it, it says installtion abordted. make me cry ><
so i try to extract the file in my computer,and the i found it the file had break,i download it from the official repencis post,try 4-5 times already,also fail.
Any solution? =]
Click to expand...
Click to collapse
i encountered your problem and found out my error :
-must be ROOT
-PARTITION SD CARD (optional)
-install ROM's via CWM
-download again the .zip rom
Questions :
1. Did u use CWM ?
You should PM the CONTRIBUTORS/THEMERS/ETC.. about your problem.
m.h.mahadi said:
stock odex rom
Click to expand...
Click to collapse
I should prefer STOCK DEODEXED ROM -more customizable
then if you want to make FREE SPACE IN INTERNAL you should download ROMODEXER
just flash via CWM
Press thanks if i help a little
Stock with a kernel stuffed with governors and schedulers.
Sent from my GT-S5360 using xda premium
My proximity sensor us not working ....please help
raunakb said:
My proximity sensor us not working ....please help
Click to expand...
Click to collapse
you need to provide more information
rom and kernel you are currently using
it maybe a rom bug - you can try copying the sensor lib files from a working stock rom into your rom and set permissions
If you dont know how to do this I would suggest using a different rom or flash stock rom via odin
More info
I m usnig hells fusuon #50 kernel.and stock rom gingerbread 2.3.6
raunakb said:
I m usnig hells fusuon #50 kernel.and stock rom gingerbread 2.3.6
Click to expand...
Click to collapse
no reason why it wouldnt work then if no other changes have been made
All I can suggest is flash stock rom via odin and then test - if it still doesnt work being on a fresh stock rom then it maybe hardware fault
Thanks
Thanks, I will try it