Database Users

Gingerblur to Gingerbread

Ok i've searched the forums and am getting more and more confused. I have gingerblur 3.1 installed currently and would like to do the ATT ota update. Can I just download it and install from the system update? Or do I need to wipe the whole phone clean and start over? Thanks and sorry if this is a duplicate.

I am wondering this too...
Sent from my MB860 using XDA Premium App

I'm in the same boat, I got GingerBlur 4.5 installed and I would like to install the Gingerbread 4.5.19 OTA update. Are there proper instructions out there? I can't find any. I'm assuming I may have to go back to Stock 1.8.3 and do an OTA update. But can someone please confirm. Any instructions would help as well. Thanks

The directions I seem to need are...
Un gingerblur
Un root
As an aside, I got notified of the ota and it failed.
Sent from my MB860 using XDA Premium App

goofyj8 said:
I'm in the same boat, I got GingerBlur 4.5 installed and I would like to install the Gingerbread 4.5.19 OTA update. Are there proper instructions out there? I can't find any. I'm assuming I may have to go back to Stock 1.8.3 and do an OTA update. But can someone please confirm. Any instructions would help as well. Thanks
Click to expand...
Click to collapse
Make sure your battery is fully charged so that you don't run out of power during the upgrade process.
To install the upgrade:
Copy the file to the SD Card
Your phone is on the latest Android 2.2 software (Blur_Version.4.1.83.MB860.ATT.en.US)
From the home screen, press Menu, select Settings,
Scroll down and select About Phone.
Select System upgrades.
After a couple of minutes, your device will confirm the upgrade is available.
The Copy prompt will appear. Select “Copy”
The Install upgrade prompt will appear. Select Install Now.
Your device will power off and display installation progress.
IMPORTANT INFORMATION:
Please ensure you are aware of the following information after the installation of the package
It will then power up and stay on the carrier logo for up to 5 minutes before powering on to the home screen.
Please do not interrupt this process.
Contacts and email from Google and MOTOBLUR may take up to 60 minutes to synchronize. The phone may appear slower during this initial synchronization process

I am in the same boat as that guy with gingerblur 4.5 .
I don't have an sd card around me atm so would putting the file on the internal storage work or not?
ALSO if I update this way, will it delete all of my media and apps? thanks

ota update to gingerbread
damonsmith666 said:
I am in the same boat as that guy with gingerblur 4.5 .
I don't have an sd card around me atm so would putting the file on the internal storage work or not?
ALSO if I update this way, will it delete all of my media and apps? thanks
Click to expand...
Click to collapse
please just wait for a dev to answer this question or we may brick or worse lose root forever (ohh noo) seriasly just be calm a work around will be comming soon

I will wait...
Sent from my MB860 using XDA Premium App

same issue here
i tried to install the OTA update, it failed... tried to install it manually and it didn't work either. i tried to install it using android recovery and it didn't work.
Im using gingerblur 4.5
side note,
can any one of you please provide the full name of your system version? mine says "Version.4.1.83.MB860.ATT.en.US ", thing is, I tried to flash a stock sbf to roll back to motoblur, RSDlite fails every time with a message "sec_exception febe 35 35", my phone isn't recognized as 'NS Flash Olympus', it shows 'SE Flash Olympus'.
is there a thread to fix this issue?
thanks!

I figured out how to do it. First I unlocked the bootloader and then followed the directions on here.
http://forum.xda-developers.com/showthread.php?t=1163342
Worked fine

You need to flash back to stock, i.e. flash 4.1.26 or 4.1.57 or 4.1.83. OTA update to 4.1.83 if you are on an earlier version. The update will not work if you are modded in any way. You need to be on stock 4.1.83.
My god, how many times does this have to be said!!!

So let's just say that you are a moron (like me) and just did the OTA over Gingerblur 4.5 and now you have the exclamation point triangle and android on your screen and it does do anything... is it safe to battery pull? or did I just brick my phone?
EDIT: nevermind...

Is there any guide how to flash back?...
Sent from my MB860 using XDA Premium App

Well you could use rsd if you've never installed the GB ota.
Sent from my MB860 using XDA Premium App

Update, now problem
I was on gingerblur 4.5, rooted, sideload enabled.
used RSD to flash 4.1.83 - successful - booted - checked mail - etc...
went to Motorolla.com and DL the official firmware
copy .zip to sd
settings/about/upgrade
let it run
followed instructions to the letter from Motorola
30 minutes now on the Rethink Possible screen - seems like a fail?
Help?
Update - she lives, just needed to wait about 45 minutes

This is how to access pink screen folder (U8800 2.3 28.12.2011)

For U8800 2.3 Official Update (28.12.2011)
Root required.
1. Install "Es File Explorer"
2. Es File Explorer > Setting > File Settings > check "Show Hidden Files"
3. Exit "Es File Explorer"
4. Install "Remount" (Stephen Stericson) app by market
5. Run "Remount"
6. Select "/.cust_backup"
7. Select "rw"
8. Click "REMOUNT"
Okey
Now, open "Es File Explorer" and go "/.cust_backup" folder.

it doesnt root with superone click latest, how im supposed to do that

genti7 said:
it doesnt root with superone click latest, how im supposed to do that
Click to expand...
Click to collapse
For me superoneclick get error but it correctly install superuser and su.

If rooted, Root Explorer can do it too.
Sent from my U8800 using Tapatalk

Blefish said:
If rooted, Root Explorer can do it too.
Sent from my U8800 using Tapatalk
Click to expand...
Click to collapse
Root explorer can't do it.
Which version do you use? Give me link, please.

Pls could someone translate this?
今天官方2.3修正版发布，但是同时官方锁了内核：即无法在粉屏下替换RECOVERY了。
对于一部分升级成功的人还好，但是有一部分人会遇到2.3体验版相同的问题：重启或关机无限卡第二屏，必须双清后才能进入。
以往的解决方法是替换民间RECOVERY后双清，但是现在无法在粉屏下替换，而以往的ROOT工具都必须打开LOG设置后重启一次，才能完成ROOT，但重启后必须双清，这样就造成了死循环。
所以本人连夜编写了U8800专用一键ROOT工具，只需打开USB调试和关闭快速关机即可ROOT。
无限卡第二屏的朋友先用我这个ROOT，然后重启后双清，再次进入机器后装Root.Explorer,替换为民间RECOVERY后再次重启双清。这样以后就不会卡了。
另外有些机器升级2.3时需要数据线连接手机，再按三键进粉屏才能升级。否则只进粉屏没有反应。
时间仓促就写这么多，有问题留言或者加我微博 @桌子哥
Click to expand...
Click to collapse
Are the correct drivers for root..

demolition23 said:
Pls could someone translate this?
Are the correct drivers for root..
Click to expand...
Click to collapse
Revision 2.3 official release today, but while the official locked the kernel: the pink screen can not be replaced under the RECOVERY.
For the better part of successful people to upgrade, but some people experience the version 2.3 will encounter the same problem: unlimited card restart or shut down the second screen, you must double-clear before entering.
The solution is to replace the previous private RECOVERY after double clear, but now can not be replaced under the pink screen, while the previous ROOT tools must be set to open LOG after reboot once, to complete ROOT, but must be double-clear after the restart, thus causing infinite loop.
So I wrote U8800 night ROOT dedicated a key tool, simply turn USB debugging on and off quickly to turn it off R OOT.
Infinite second screen with my friends first ROOT, and then double-clear after the restart, re-entering the machine after the installation Root.Explorer, replaced again after the restart civil RECOVERY double clear. This future will not card.
Moreover, some machines need to upgrade the 2.3 data cable to connect phone and press three keys into the powder-screen to upgrade. Otherwise, only the powder into the screen does not respond.
Time to write so hasty, I have problems leave a message or add a table microblogging @ Columbia
---------- Post added at 11:12 PM ---------- Previous post was at 10:34 PM ----------
I was able to Root this ver using DooMLoRD_v3_ROOT-zergRush-busybox-su
Could not go to Pink screen in chinese forum some on told its locked.....
I was able to move Recovery5.0.2.7.img using root explorer and got in to recovery screen as it does but there is no access to pink screen still.

you have the CW recovery running?

Ah, nothing. I didn't know the usb didn't work in pink screen in latest gb.

demolition23 said:
you have the CW recovery running?
Click to expand...
Click to collapse
Yes Recovery 5.0.2.7 running no issues
Now i replaced all raw images of last GB files with new one using Rootexplorer except recovery need to check Pink screen
I could not enter pink screen.....

krish_nank said:
Yes Recovery 5.0.2.7 running no issues
Now i replaced all raw images of last GB files with new one using Rootexplorer except recovery need to check Pink screen
Click to expand...
Click to collapse
Can you do
wipe data/factory reset
nandroid backup
and upload the backup?
I think that we will be able to restore it safely to previous beta 2.
And will be without locked pink screen.

demolition23 said:
Can you do
wipe data/factory reset
nandroid backup
and upload the backup?
I think that we will be able to restore it safely to previous beta 2.
And will be without locked pink screen.
Click to expand...
Click to collapse
Wipe data/cache/delvick successfully
Backup successful (To internal storage as i did not have enough mem on external)
Restored successfully (From internal storage)
every time when we connect USB cable in pink screen in PC it used to POPUP that U8800Pro connected now it does not....

Moved to General
This is a basic guide, i feel its more suited to the general section.
Take it easy
O_G

hi friends I downgrade to B162 from internal storage it works for me then i had full acsess to the pink screen ccw recovery and restore my miui backup no more problems.
I think that is waste of time until the final version comes.
the most strange thing to me was that when i install V100R001C00B522G001 i had a message that there is an upgrade and i receive an update.zip 28.64 MB via wifi, never manage to upgrade it stops with an error file.

Who has updated to beta version 2 (B518) won't feel any diference beside cannot access to pinkk bootloader, i've been reading the chinese huawei forum, and the lock to the pink bootloader is to stay, all the future releases will block it, huawei says that's to low support costs, cause when costumers brick the phones had being messing around the files in /image folder and huawei has to change the motherboard of the phones, we have still access to the folder, using some apps like "root explorer", but for the "dumb client" that just want to make some calls and use youtube and gmail, that doesn't make any difference...
Bye!

Ps3udo said:
Who has updated to beta version 2 (B518) won't feel any diference beside cannot access to pinkk bootloader, i've been reading the chinese huawei forum, and the lock to the pink bootloader is to stay, all the future releases will block it, huawei says that's to low support costs, cause when costumers brick the phones had being messing around the files in /image folder and huawei has to change the motherboard of the phones, we have still access to the folder, using some apps like "root explorer", but for the "dumb client" that just want to make some calls and use youtube and gmail, that doesn't make any difference...
Bye!
Click to expand...
Click to collapse
Well, they should fix fastboot then. In fact, they should replace the pink screen with fastboot.
Sent from my U8800

Company has asked its beta update users to install this new update as soon as possible as if any issue created because of beta would not be covered under warranty............
http://mirolta.com/2011/12/29/huawe...rbread-update-for-u8800-ideos-x5-smartphones/

krish_nank said:
Wipe data/cache/delvick successfully
Backup successful (To internal storage as i did not have enough mem on external)
Restored successfully (From internal storage)
every time when we connect USB cable in pink screen in PC it used to POPUP that U8800Pro connected now it does not....
Click to expand...
Click to collapse
Can you please share the backup?
Sent from my u8800

Blefish said:
Well, they should fix fastboot then. In fact, they should replace the pink screen with fastboot.
Sent from my U8800
Click to expand...
Click to collapse
I Agree, I've come from a Huawei U8230 (TMN A1) with fast boot, this was a lot better!!!
Bye!

Özgürce said:
For me superoneclick get error but it correctly install superuser and su.
Click to expand...
Click to collapse
it does with the previous 2.3.2

[help] update

Hello,
I have a U8800-51 but when i updated to the official 2.3.5 it made it a U8800 somehow?
It also took away my CWM and when i try to get it back using the + and - volume keys
the pink screen shows up but when i try to connect it i cant sync it or get files from my
phone to my computer. I also tried using a root explored app to get CWM but it gives
me a message saying "your phone is not rooted" so is their a way i can use the "update"
from SD card thing to install the Boot Loader so i can get ROM's or the new CWM
Sorry if im confusing
Thank you

SimplyDennis said:
Hello,
I have a U8800-51 but when i updated to the official 2.3.5 it made it a U8800 somehow?
It also took away my CWM and when i try to get it back using the + and - volume keys
the pink screen shows up but when i try to connect it i cant sync it or get files from my
phone to my computer. I also tried using a root explored app to get CWM but it gives
me a message saying "your phone is not rooted" so is their a way i can use the "update"
from SD card thing to install the Boot Loader so i can get ROM's or the new CWM
Sorry if im confusing
Thank you
Click to expand...
Click to collapse
So from your post i understand that u installed official 2.3 and lost your CWM and root and now you want to get them back, right?

orangesodaxxl said:
So from your post i understand that u installed official 2.3 and lost your CWM and root and now you want to get them back, right?
Click to expand...
Click to collapse
And locked pink screen as it seems
Sent from my U8800pro using xda premium

[HOW TO:]N8013 Users: Use Odin to Install the New U.S. 4.1.2 JB ROM [UPDATED: 16JAN]

This thread is no longer valid or necessary other than as a guide on how to use Odin. U.S. users that are bone stock should be able to apply the update via OTA or Kies. If anyone's having an issue they can install the U.S. JB ROM by using Odin to manually replace their current U.S. ROM with a completely new copy of the U.S. JB ROM.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Basically what you’re doing is replacing your current PDA (MD5) file with the U.S. 4.1.2 version that's just been released.
To install a ROM it's easiest to use desktop Odin. You can download Odin 1.85 here…
https://www.google.com/search?q=odin+1.85&sourceid=ie7&rls=com.microsoft:en-us:IE-Address&ie=&oe=
Make sure you’ve got Kies installed on your PC because it installs the Windows drivers necessary for Odin to see your device.
Download the full and complete U.S. 4.1.2 JB ROM here…
http://hotfile.com/dl/189276711/f83...GT-N8013-XAR-N8013UEUCMA3-1357740396.zip.html
Unzip the file you downloaded. After it's extracted you should see an MD5 file. That's what you're going to install. Right-click on the Odin EXE file you downloaded and run it as administrator.
Put your device in to “download mode” by turning it off and then restarting it by pressing the power and volume down buttons at the same time. You should see an “are you sure?” message from Samsung. Accept it and your device is now in download mode.
Connect your device to your PC via USB. If the connection’s successful it should look like this…
Next, click on the PDA button and locate the file you extracted and then click start...
You’ll see the update’s progress in the message box in Odin and via a progress bar on your device. When Odin signal’s it’s finished disconnect your device and it will finish installing the new files.
That's it. Your N8013 is now running a fresh install of 4.1.2.

These are the directions I followed - many thanks!!

So, it's confirmed that it won't affect the flash counter for sure? I'm thinking of using the All-Share Cast dongle in the future and it exhibits some strange behavior if the flash counter hasn't been reset...

Will this work on n8000?
Sent from my GT-N8000 using xda app-developers app

Yes it will work the same for all note models but you need to make sure have the firmware for that particular model.
No it will not change your count, you can install stock roms of any regions as many times you want it will not change the count.
Your count will change when you root it or install a custom rom you can easily reset the flash counter

It seemed so simple...followed instructions to the tee. I just got status 7 error. Failed when I tried to flash update.zip from external SD card. Now s note is fc every second. I might have to go return my tablet tomorrow any ideas or help? I am not new to flashing roms but I haven't ever seen this.
Sent from my SPH-L710 using xda app-developers app

Flashing OTA is always tricky, think you were flashing a zip file I would not recomend it.
Also make sure the OTA is for the same version an region as your rom is otherwise it will give you errors

Did you download the N8010XXALI3 version or the N8010XXALGC version as there are two German versions in that list.
Not sure if that would make a difference.

GETCASHMONEY said:
It seemed so simple...followed instructions to the tee. I just got status 7 error. Failed when I tried to flash update.zip from external SD card. Now s note is fc every second. I might have to go return my tablet tomorrow any ideas or help? I am not new to flashing roms but I haven't ever seen this.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
No need to return, go back into recovery and clear the cache. Then reinstall the update. Boot into your tab, it might be a bit laggy at first but let it sit for about 5 minutes DON'T TOUCH IT. Reboot the tab and it should be fine. I had a similar issue, my tab is now flying along. For any fc you get, go into the app and clear all the stored data. IF it continues uninstall and reinstall. Remember, you are going from ICS to Jelly Bean, some apps act differently in Jelly Bean.
Riki

Just to be safe I assume I will be ok if I am rooted and dont have stock recovery. I will just have to reroot. Correct?

After you flash the German stock ICS with Odin you will get back the stock recovery.
Sent from my GT-N8010 using Tapatalk 2

When the official UK one comes out will it be easy to change to that if needed?

Yes. 2 options :
Get back to the stock ics for your region, and wait for samsung ota or
Download jb stock fw for your region from sammobile and flash with odin
Edit: assuming that you are from UK.
Sent from my GT-N8010 using Tapatalk 2

Well I'm currently updating to JB via sd card. However it has been on "Patching remaining system files" for about 15 minutes.
How long should it take?

neonplanet40 said:
Well I'm currently updating to JB via sd card. However it has been on "Patching remaining system files" for about 15 minutes.
How long should it take?
Click to expand...
Click to collapse
Mine seemed to take a few minutrs. After the progress bar on the tablet seemed to stop, I unplugged and held the power button down to reboot. Holding down the power button while holding volume up will eventually boot you into what is called recovery mode. You then select what you want to do by clicking vol up or down to select then push power button to proceed.

Let it finish... even if you have to wait 30 min
Sent from my GT-N8010 using Tapatalk 2

Well, I stopped the fc by clearing s note data. Thanks for the help. I'm still stuck on ics though. When I try to flash update.zip it fails to get build.prop sector 7 or something. I transferred it around a little before installing - it could be corrupted. I am going to re download it directly onto my tablet and try again. Thanks everyone for your help, I really appreciate it.
Sent from my SPH-L710 using xda app-developers app
---------- Post added at 08:33 AM ---------- Previous post was at 08:21 AM ----------
mikemod said:
Did you download the N8010XXALI3 version or the N8010XXALGC version as there are two German versions in that list.
Not sure if that would make a difference.
Click to expand...
Click to collapse
I actually did download the wrong dbt one. I'm downloading the other one to give it a shot.
Sent from my GT-N8010 using xda app-developers app

I got it to work. Thank You for Your help. Jelly Bean is crazy fast I love it!
Sent from my GT-N8010 using xda app-developers app

GETCASHMONEY said:
I got it to work.
Click to expand...
Click to collapse
What do you think happened that made it not work at first and what did you do to fix it? I want to keep the first post updated so people don't brick their devices or have heart attacks during the process.

Will it be possible to download JB update it directly to my tablet without an external SD card?

[Q] complete rooting process

Hi
can anyone help me please(in detail) how can i root my motorola defy +. I am getting confused by reading all the article because i am not getting exactly the same version as of mine.
System Version- 45.0.891.MB526.AsiaRetailkl.en.03
Model Number-MB526
Android version 2.3.4
Baseband Version EPU93_U00_.60.00
Kernel Version [email protected]#
Build Number 4.5.1.134_DFP-891
I am from India and please provide the verified link . Currently my phone is behaving very slow so i need to root and upgrade it .
I am not getting Asia retail SBF file for MB526 ,it's available for MB525 .it would be any problem if i used SBF available
for MB525?? Thanks in Advance ..Reply please .

Use the app called Framaroot you find it here on xda.
http://forum.xda-developers.com/showthread.php?p=37508806
Sent from my MB526 using xda app-developers app

cyrusct82 said:
Use the app called Framaroot you find it here on xda.
http://forum.xda-developers.com/showthread.php?p=37508806
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
I read from your links that Keep in mind that framaroot is not a permanent rooting application.can you please tell me it is ok to root via frameroot ?? Because i am new in rooting so don't have much more idea regarding this .can you please provide the link and process of rooting via CyanogenMod . Thanks

roushan said:
I read from your links that Keep in mind that framaroot is not a permanent rooting application.can you please tell me it is ok to root via frameroot ?? Because i am new in rooting so don't have much more idea regarding this .can you please provide the link and process of rooting via CyanogenMod . Thanks
Click to expand...
Click to collapse
Yes you can root with framaroot. And there is a retail asian SBF which i posted in another thread.
One advice for you - read, read, read before you do anything. You seem to have misunderstood some facts. Read this - http://forum.xda-developers.com/showthread.php?t=1216982

hotdog125 said:
Yes you can root with framaroot. And there is a retail asian SBF which i posted in another thread.
One advice for you - read, read, read before you do anything. You seem to have misunderstood some facts. Read this - http://forum.xda-developers.com/showthread.php?t=1216982
Click to expand...
Click to collapse
It's ok but i was saying that i am using DEFY+ and in the official link there is no SBF file for RetailAsia .The SBF file for Retail Asia is available for DEFY so can you tell me is it ok to use the SBF file for defy or use the SBF file for other Retail for DEFY+ ??

roushan said:
It's ok but i was saying that i am using DEFY+ and in the official link there is no SBF file for RetailAsia .The SBF file for Retail Asia is available for DEFY so can you tell me is it ok to use the SBF file for defy or use the SBF file for other Retail for DEFY+ ??
Click to expand...
Click to collapse
I've put the link for retail asian Defy+ on another thread:laugh:, how many times do i have to tell you this?
Here are the steps for rooting-
1. Take a backup of all your apps and data.
2. Download Framaroot 1.6.0 from the thread (don't forget to thank the dev) and download 2ndinit - http://forum.xda-developers.com/showthread.php?t=1032212.
3. Copy both apk files to your sd card.
4. Enable USB debugging and unknown sources in settings-->applications.
5. Open file manager and install and open the app.
6. Root.
7. Then install the 2ndinit apk.
8. Reboot, and when the LED becomes blue, immediately press the volume down button.
9. Then a screen will appear. Now you can choose an option by pressing volume button and go up/down by pressing volume up/down.
10. Choose recovery, then choose stable/custom recovery (whichever is there).
11. Choose backup and then choose backup all.
12. Be patient while it does the job, DO NOT TAKE OUT THE BATTERY IF YOU THINK IT IS STUCK.
13. Then the options screen will come back.
14. Now you can install custom ROMs, PM me if you need more help.

Don't stress yourself so much. Grab a fixed sbf of quarx cm 10.2 or what custom sbf you like. That's simple for you
Sent from my C6602 using Tapatalk 4

help
HI i installed frameroot and 2nd init .and i rebooted my defy + but not getting blue flashing light ,so i am not able to enter to boot menu .please repaly ASAP .
hotdog125 said:
I've put the link for retail asian Defy+ on another thread:laugh:, how many times do i have to tell you this?
Here are the steps for rooting-
1. Take a backup of all your apps and data.
2. Download Framaroot 1.6.0 from the thread (don't forget to thank the dev) and download 2ndinit - http://forum.xda-developers.com/showthread.php?t=1032212.
3. Copy both apk files to your sd card.
4. Enable USB debugging and unknown sources in settings-->applications.
5. Open file manager and install and open the app.
6. Root.
7. Then install the 2ndinit apk.
8. Reboot, and when the LED becomes blue, immediately press the volume down button.
9. Then a screen will appear. Now you can choose an option by pressing volume button and go up/down by pressing volume up/down.
10. Choose recovery, then choose stable/custom recovery (whichever is there).
11. Choose backup and then choose backup all.
12. Be patient while it does the job, DO NOT TAKE OUT THE BATTERY IF YOU THINK IT IS STUCK.
13. Then the options screen will come back.
14. Now you can install custom ROMs, PM me if you need more help.
Click to expand...
Click to collapse

You probably didn't open 2ndinit and install boot menu.
Sent from my MB526 using xda app-developers app

roiusky occupying
hotdog125 said:
You probably didn't open 2ndinit and install boot menu.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Please help screwed up with my phone !!!!!!!!!!!!!!!
first thanks to you i followed all the steps you told .i tried custom rom with cm-7-20130301-NIGHTLY-jordan.zip but stucked with Motorola M symbol the i tried Custom Rom with http://quarx2k.ru/cm10.1-nightly-defy+/2.6.32/ (09-Jul-2013 15:59 168M) and http://goo.im/gapps .it worked i mean installed but facing problem with bluetooth and pattern lock(all security type pin ,password,pattern were not working) and most importantly incoming call was not coming so i try to install cm-7-20130301-NIGHTLY-jordan.zip then after i rebooted my phone then again stucked with Motorola M symbol .Then remove battery and restart again but blue flash light is not coming and then only able to enter motorola boot option (reboot, apply recovery, wipe data and wipe cach) then i entered into recovery then update from sd card but getting signature failed error and now my battery is not even charging getting in boot option battey low cannot load program ...please help me what can i do ..any chance to get alive my phone ....thanks in advance ....