Related
I need help, I got the Nexus (sprint) and have tried and tried to unlock. I had fits, read many forums, and was directoed to an unlocker forum. I used Superboot GR140. I had downloaded su 2.3.6.1 to my phone.
Using this method, it unlocked but now I am stuck. I cannot get anything else to load.
I'm not sure if I used an incorrect Superboot method (meaning for a different phone since the forums aren't split).
I have access to Fastboot Mode Screen, phone is recognized, but when using cmd, it shows C:\Superboot. I do not know what else to do to direct it to files I have on my computer or how to download these, 2.3.4 back to my phone. I'm stuck and really need help.
I will gladly push the Thanks button for any help I can get to get me up and
running again.
Thanks
Go look in the developer section, one of the stickies, the one that talks about the nexus s 4g cdma. You might have flashed something that was meant for the gsm nexus s. It has links to correct files and guides for the sprint version of the nexus.
Pm me and I will help u over the I'm client of your choice.
Basically, I have no service, and no card, so since I can access Fastboot Mode, and unlocked, is there a way to push a rom direct onto Sprint phone.
I looked in Developers Forums, I am not ready to jump in with custom rom yet (I have used extensively on other phones) but would like to start with stock, go with root and programs as needed.
So how would I push to phone via computer? and what programs, again, no idea of commands to use.
Have you flashed CWM yet? You can use that to reflash the stock ROM. Worst case you can use this thread:
http://forum.xda-developers.com/showthread.php?t=1072698
That will bring you to 100% out of the box factory settings
If you can get into fastboot, then you didn't brick it. You'll be fine, you just need to get in touch with someone that can walk you through the process of fixing it. Or search around, read, and take your time to figure out what to do.
It's not hard. The worse thing you can do is panic or rush to fix it.
Basically what you did when using superboot was you actually installed a boot.img file not meant for your device on your phone. What you should do is, go through the guide for your specific phone...you will have to install a recovery image and then install a custom rom or stock rom.
I do not know if you know your way around with fastboot....basically you could also ask a dev to send you the original boot.img and flash it using fastboot but the first stepi described is easier.
Sent from my Nexus S using Tapatalk
nmoreman said:
I need help, I got the Nexus (sprint) and have tried and tried to unlock. I had fits, read many forums, and was directoed to an unlocker forum. I used Superboot GR140. I had downloaded su 2.3.6.1 to my phone.
Using this method, it unlocked but now I am stuck. I cannot get anything else to load.
I'm not sure if I used an incorrect Superboot method (meaning for a different phone since the forums aren't split).
I have access to Fastboot Mode Screen, phone is recognized, but when using cmd, it shows C:\Superboot. I do not know what else to do to direct it to files I have on my computer or how to download these, 2.3.4 back to my phone. I'm stuck and really need help.
I will gladly push the Thanks button for any help I can get to get me up and
running again.
Thanks
Click to expand...
Click to collapse
If you are going to waste your brand new phone by being stupid how about giving it to me instead! Ill take good care of it.
Sent from my PC36100 using XDA App
Here Try this and let me know if it work:
1.Download this platform-tools.zip and extract it to your desktop
2.Connect your phone to the PC and enter bootloader mode
3.Press and hold Shift while right-clicking the folder you extracted 'platform-tools'
4.Click 'Open command window here' from the pop-up menu. cmd.exe window will open.
5.If the Bootloader is Unlocked continue to the next step. Type in the cmd.exe window 'Fastboot oem unlock' and follow the steps on the phone screen.
6.Type in the cmd.exe window 'fastboot flash boot boot.img'.
7.Type in the cmd.exe window 'fastboot reboot'.
nmoreman said:
I need help, I got the Nexus (sprint) and have tried and tried to unlock. I had fits, read many forums, and was directoed to an unlocker forum. I used Superboot GR140. I had downloaded su 2.3.6.1 to my phone.
Using this method, it unlocked but now I am stuck. I cannot get anything else to load.
I'm not sure if I used an incorrect Superboot method (meaning for a different phone since the forums aren't split).
I have access to Fastboot Mode Screen, phone is recognized, but when using cmd, it shows C:\Superboot. I do not know what else to do to direct it to files I have on my computer or how to download these, 2.3.4 back to my phone. I'm stuck and really need help.
I will gladly push the Thanks button for any help I can get to get me up and
running again.
Thanks
Click to expand...
Click to collapse
THANK YOU, for answer, but it didn't work.
I downloaded, opened, opened cmd from there.
My phone is unlocked, setting there with unlock screen, put it in bootloader mode, but when I type in instructions, it comes back "not recognized as internal, external command, program, batch file"
This is the problem I had when trying to unlock, so reading, used Superboot, probably wrong phone, so now it is wiped and empty.
I also read another thread suggesting Odin in this situation. Have downloaded that, SamsungSimpleDL, followed those directions, that doesn't work either. I have hacked and rommed Epic, very familiar with that, if it works, but cannot point to proper files (pda, pit, or bootloader).
So any other ideas, I am very good at directions, that is how I learned
My Phone is Fixed - YEAH
This did not work, but this link did
http://forum.xda-developers.com/showthread.php?t=1072698&page=4
Basically used Odin (my old backup from Samsung Epic) and it worked when all these suggestions wouldn't.
I couldn't unlock easily, like all of these, therefore used Superboot. Would recommend no one touches that!!
I couldn't run any of the commands before this, and still couldn't use these.
So the instructions to dig thru the Developers section is correct, but so hard with so many customs, phones, carriers, to choose from. Makes it difficult
So use this link if stuck like me, I am just glad I con't have a brick, and I'm still pushing the Thanks button for all who helped, that's what will make this fun.
So i read thru a lot of the root threads & none of them made anh sense to me.I downloaded ADB,moto drivers, sdk,jdk,etc.But still none of it made any sense. So i tried the 1 click root & soft bricked my xoom. It gets stuck at the Motorola screen. I tried getting into the options & wiping user data,factory reset.But it would still get stuck at the dual core screen. So i tried a suggestion of using 1 click root to undo the root. But it said the xoom would say "done" twice on the screen but it only said "done" once. So then i relocked it hoping it would reboot & work but it didn't. I see 1 guy was able to fix his using a rooting guide.I hope someone here can help me out.
Sent from my DROIDX using XDA App
Arun01 said:
So i read thru a lot of the root threads & none of them made anh sense to me.I downloaded ADB,moto drivers, sdk,jdk,etc.But still none of it made any sense. So i tried the 1 click root & soft bricked my xoom. It gets stuck at the Motorola screen. I tried getting into the options & wiping user data,factory reset.But it would still get stuck at the dual core screen. So i tried a suggestion of using 1 click root to undo the root. But it said the xoom would say "done" twice on the screen but it only said "done" once. So then i relocked it hoping it would reboot & work but it didn't. I see 1 guy was able to fix his using a rooting guide.I hope someone here can help me out.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Motorola published the factory files for Xoom awhile back so if you still have fastboot, you can recover from it.
http://developer.motorola.com/produ...utm_source=supportforums&utm_term=unlockboard
I relocked it using the 1 click root and all it says now is "Failed to boot LNX 0x0004" "Starting RSD mode 2".I'm now trying to use the 1 click root to try to get it back to where it was..I just don't understand all of the rooting methods even after downloading adb,sdk,,etc..It may as well be written in Chinese.I'm sure if i saw someone actually do it i could catch on to it but right now rooting is confusing..hence i went with the 1 click.I had no problem 1 click rooting my droid x with a 1 click root.
Stop using one click crap. If you don't know what you're then you should not be messing with your device.
Sent from my DROIDX using XDA App
I can. Just won't.
Arun01 said:
I relocked it using the 1 click root and all it says now is "Failed to boot LNX 0x0004" "Starting RSD mode 2".I'm now trying to use the 1 click root to try to get it back to where it was..I just don't understand all of the rooting methods even after downloading adb,sdk,,etc..It may as well be written in Chinese.I'm sure if i saw someone actually do it i could catch on to it but right now rooting is confusing..hence i went with the 1 click.I had no problem 1 click rooting my droid x with a 1 click root.
Click to expand...
Click to collapse
Type oem unlock again and then flash the stock images...youll be good to go...also there are really good stickies in here that help..pleasedont forget to search before starting a new thread.
albundy2010 said:
I can. Just won't.
Click to expand...
Click to collapse
And this is rude and uncalled for
The OP stated he read quides etc and none of it made sense to him etc. So instead of asking for help a explanation he tries a one click method. Which is stupid. He than softbricks the device and asked for help here.
Then he is told that moto released the factory images and use fastboot if he still has it to recover the device. He then decides to ignore that entirely and go back and try to unroot/restore with the one click BS again. Then he tries to use it again to go back to where he was. Just flat out stupid. He did something when he had no idea wtf he was doing. Was told what to do. Did not do it. He even said it is like Chinese to him.
So I told him to stop messing with one click crap. Which is correct. I told him to stop messing with the ****ing thing. Which is also correct. He needs to learn/understand wtf he is doing. Instead of basically button mashing/trying crap and hoping it will basically fix itself.
On top of that this posted in the wrong section. Uncalled for my ass. He is the one that was rude when told to not mess with the one click or the device. Now this part is rude. **** his stupid ass.
csseale said:
Type oem unlock again and then flash the stock images...youll be good to go...also there are really good stickies in here that help..pleasedont forget to search before starting a new thread.
Click to expand...
Click to collapse
How do i get to that ..and where do i type it at ..i looked in device manager & does recognize the xoom..it says "Motorola USB Device:Motorola Flash Interface"..In properties under "Driver" it has options for driver details..update driver..disable & uninstall.Can i do anything with them?
I tried opening SDK manager but it never lets me type anything in the box as it's always trying to do some kind of update in another window so when i close the window it closes all of the windows.
Sent from my DROIDX using XDA App
Arun01 said:
So i read thru a lot of the root threads & none of them made anh sense to me.I downloaded ADB,moto drivers, sdk,jdk,etc.But still none of it made any sense. So i tried the 1 click root & soft bricked my xoom. It gets stuck at the Motorola screen. I tried getting into the options & wiping user data,factory reset.But it would still get stuck at the dual core screen. So i tried a suggestion of using 1 click root to undo the root. But it said the xoom would say "done" twice on the screen but it only said "done" once. So then i relocked it hoping it would reboot & work but it didn't. I see 1 guy was able to fix his using a rooting guide.I hope someone here can help me out.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
If they didnt make sense to you in the first place you probably shoud not be attempting to root... U went straight to an old method that even the developer has marked in hs thread can full brick you and should not be used. The xoom costs like 600 bucks... Why wouldnt you do extensive research on how to root? If you did not understand the terms why didn't you research the methods and learn it?
I hope you can flash the factory imagines back through fastboot and adb, but i just do not understand why people attempt this stuff when they have no idea what the terms even mean...
You need to have sdk, hook up to usb on your computer, and follow one of the unlock guides posted on this site... A real one using adb... Then you need to follow a root one...
Sorry that is not more helpful, but half of this experience is that you need to learn what you are doing and the instructions are out there. If they do not make sense at this point im afraid you are stuck. Now the way your device is you have to figure it out...
Arun01 said:
I relocked it using the 1 click root and all it says now is "Failed to boot LNX 0x0004" "Starting RSD mode 2".I'm now trying to use the 1 click root to try to get it back to where it was..I just don't understand all of the rooting methods even after downloading adb,sdk,,etc..It may as well be written in Chinese.I'm sure if i saw someone actually do it i could catch on to it but right now rooting is confusing..hence i went with the 1 click.I had no problem 1 click rooting my droid x with a 1 click root.
Click to expand...
Click to collapse
Please check out this thread.It is called Root heaven for a reason. Just about every viable rooting guide, all the files and explanations you will need are here.
http://forum.xda-developers.com/showthread.php?t=1209341
I urge you to just calm down, read about what is the sdk, what is adb, how to recover from a soft brick and so on. The xda xoom forum is all about learning and teaching. We were all noobies once. The Xoom is a very complex device with many models and vesions and one clicks just don't cut it. There are rooting methods that are relatively simple but you really need to be prepared before you get started.
Good luck and don't despair. You'll get there.
Thanks for the help guys.I'm reading through all of the threads and i see a typo in a post that in the command window would've never let me find the sdk tools on my c drive. But after i retyped it i did it & a bunch of writing came up. Trying to figure out now how to flash the stock images to the xoom.
Sent from my DROIDX using XDA App
Arun01 said:
Thanks for the help guys.I'm reading through all of the threads and i see a typo in a post that in the command window would've never let me find the sdk tools on my c drive. But after i retyped it i did it & a bunch of writing came up. Trying to figure out now how to flash the stock images to the xoom.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
at first, make sure you install android sdk correctly. then go to android sdk-folder in your computer, u will find a folder named platform-tool. Press shift+ right click on it, then choose open command window here. After that, type in "adb devices" or "fastboot devives" to check if your xoom is connected. If yes,you good to go. If no, check your android sdk installed process
After i type in abd devices it says list of devices attached but shows nothing..i did copy the sdk tools folder to the c drive like i was told.
@OP
If you can't do it yourself, getting somebody to help you (in person) is always an option. If you live in a major city, advertise on Craigslist or some equivalent. Offer $50 for debricking + some tutorial.
In order for the device to show up in adb the device needs to actually booted into the os and have USB debugging enabled. Which you can't do.
What you're supposed to do is use fastboot.
Boot the device into fastboot mode.
Use fastboot devices to see if the computer see's it/everything is set up etc.
If bootloader is locked unlock it with fastboot OEM unlock.
Then flash the official images for your exact device. Fastboot flash boot boot.img and so on.
The last command on restoring to stock guides is optional. Fastboot OEM lock. I would not do it. No reason to relock it. If do learn decide to root later you would have to unlock again and loose all data.
albundy2010 said:
In order for the device to show up in adb the device needs to actually booted into the os and have USB debugging enabled. Which you can't do.
What you're supposed to do is use fastboot.
Boot the device into fastboot mode.
Use fastboot devices to see if the computer see's it/everything is set up etc.
If bootloader is locked unlock it with fastboot OEM unlock.
Then flash the official images for your exact device. Fastboot flash boot boot.img and so on.
The last command on restoring to stock guides is optional. Fastboot OEM lock. I would not do it. No reason to relock it. If do learn decide to root later you would have to unlock again and loose all data.
Click to expand...
Click to collapse
That's good advice...no reason to re-lock. But get back to square one so that you're functional and then when you're ready to try again, do it the right way.
Again, good luck!
albundy2010 said:
In order for the device to show up in adb the device needs to actually booted into the os and have USB debugging enabled. Which you can't do.
What you're supposed to do is use fastboot.
Boot the device into fastboot mode.
Use fastboot devices to see if the computer see's it/everything is set up etc.
If bootloader is locked unlock it with fastboot OEM unlock.
Then flash the official images for your exact device. Fastboot flash boot boot.img and so on.
The last command on restoring to stock guides is optional. Fastboot OEM lock. I would not do it. No reason to relock it. If do learn decide to root later you would have to unlock again and loose all data.
Click to expand...
Click to collapse
Thanks a lot.I was able to unlock it then it rebooted & stopped at the Motorola screen then i started the 1st command: fastboot flash boot boot.img & it says waiting on device..but nothing happens so far.Should i move on to the next step or retry?
Hi guys, I have only experience with htc devices, but I bought N10 today... Tried to root it right away, opened bootloader and then...
1) Wugs toolkit just does nothing for more than 10 minutes after starting root option with instaling custom recovery (twrp 2.5 img from twrp site)
2) mskips toolkit doesnt download anything (twrp + supersu) for more than 10 minutes, manualy unplug -> returns error with "too much download links" (?)
3) booted PC into ubuntu -> terminal -> fastboot flash recovery xyz.img -> sending image -> nothing for another 10 minutes (once some kind of protocol error, other try nothing for long either), cant flash boot, nothing
As I said, I came from htc enviroment, am I doing something wrong or its just cursed? Any help is welcome
mindlesSheep said:
Hi guys, I have only experience with htc devices, but I bought N10 today... Tried to root it right away, opened bootloader and then...
1) Wugs toolkit just does nothing for more than 10 minutes after starting root option with instaling custom recovery (twrp 2.5 img from twrp site)
2) mskips toolkit doesnt download anything (twrp + supersu) for more than 10 minutes, manualy unplug -> returns error with "too much download links" (?)
3) booted PC into ubuntu -> terminal -> fastboot flash recovery xyz.img -> sending image -> nothing for another 10 minutes (once some kind of protocol error, other try nothing for long either), cant flash boot, nothing
As I said, I came from htc enviroment, am I doing something wrong or its just cursed? Any help is welcome
Click to expand...
Click to collapse
I don't mean to ask the obvious,but did you fastboot unlock?
dibblebill said:
I don't mean to ask the obvious,but did you fastboot unlock?
Click to expand...
Click to collapse
unlock was only thing which was working in toolkit (dont know which one), but yes, n10 asked me if I want to unlock bootloader, while booting little lock icon is present (havent been there before)... or should I unlock via fastboot oem unlock too?
mindlesSheep said:
unlock was only thing which was working in toolkit (dont know which one), but yes, n10 asked me if I want to unlock bootloader, while booting little lock icon is present (havent been there before)... or should I unlock via fastboot oem unlock too?
Click to expand...
Click to collapse
You're probably already unlocked if it shows that. I'm not sure, honestly. I didn't even root my device, I immediately flashed a new recovery and ROM to it. As it is, you may want to try that- flash an AOSP ROM (since its next to stock) if you can. Try another USB cable, if possible, too
dibblebill said:
You're probably already unlocked if it shows that. I'm not sure, honestly. I didn't even root my device, I immediately flashed a new recovery and ROM to it. As it is, you may want to try that- flash an AOSP ROM (since its next to stock) if you can. Try another USB cable, if possible, too
Click to expand...
Click to collapse
flashing recovery is the thing that I am stuck at, sounds ridicolous, I thought this will be piece of cake comparing to htc devices, but it isnt. will get some fresh air and try it again after reinstaling ubuntu (13.04 sux)
mindlesSheep said:
flashing recovery is the thing that I am stuck at, sounds ridicolous, I thought this will be piece of cake comparing to htc devices, but it isnt. will get some fresh air and try it again after reinstaling ubuntu (13.04 sux)
Click to expand...
Click to collapse
Also try a different USB cable. I had one that wouldn't ADB with ANY device, so it may be the cable. It should take all of 5 minutes to be unlocked, rooted, and ready to go.
dibblebill said:
Also try a different USB cable. I had one that wouldn't ADB with ANY device, so it may be the cable. It should take all of 5 minutes to be unlocked, rooted, and ready to go.
Click to expand...
Click to collapse
allready tried the one which came with n10 and my standard kindle microusb :/
mindlesSheep said:
allready tried the one which came with n10 and my standard kindle microusb :/
Click to expand...
Click to collapse
Strange. I don't know. I guess its possible something's up with your SDK, Ubuntu, or the tablet itself. Have you updated yoru SDK?
Redownload new one... not even month ago when I tried new version of ubuntu, ill look at it in evening again got few ideas
mindlesSheep said:
Redownload new one... not even month ago when I tried new version of ubuntu, ill look at it in evening again got few ideas
Click to expand...
Click to collapse
It IS always possible it was the tablet.
I'd LOVE a Sony, Asus, or HTC-built Nexus 10.
3rd usb cable worked... thanks
I'm trying to update my wife's N7 to 4.3. She used a toolkit to root and has TWRP recovery. Everything else is stock. So first I downloaded the 4.3 update and attempted to flash, but immediately after choosing "install" I received a message the the flash failed. I thought maybe I got a bad download, so I rebooted the device and forced an OTA. The device downloaded the OTA, but then rebooted to TWRP and didn't install. Then I thought maybe I need to have stock recovery... So I unrooted, and installed stock recovery. I then forced the OTA again, downloaded, and began to install in stock recovery, and approximately halfway through it stopped and gave an error message. Then the device rebooted on it's own. I'm not sure what to do at this point. I was able to update to 4.3 on my N4 without any issues. Does anyone have a solution for me? Please let me know if there is some detail I left out. Thanks!
You can use fastboot to erase your current partitions then manually flash the 4.3 stock images.
I've never used fastboot before. Plus another problem now... I tried to flash the stock image via toolkit, now the device is stuck on the bootloader.
chrisbo4 said:
I've never used fastboot before. Plus another problem now... I tried to flash the stock image via toolkit, now the device is stuck on the bootloader.
Click to expand...
Click to collapse
On the bootloader or the boot animation? Big difference.
There was a recent change in fastboot that makes flashing the 4.3 images a little dicey if you're not using the latest fastboot executable, which I imagine could cause problems with various toolkits that bundle the executable.
Rirere said:
On the bootloader or the boot animation? Big difference.
There was a recent change in fastboot that makes flashing the 4.3 images a little dicey if you're not using the latest fastboot executable, which I imagine could cause problems with various toolkits that bundle the executable.
Click to expand...
Click to collapse
On the bootloader. I can't get past the google splash screen, but it overlays the bootloader screen. I just want to get back to stock, then upgrade to 4.3. I've tried to install adb on my computer, but couldn't get the computer to recognize the device.
chrisbo4 said:
On the bootloader. I can't get past the google splash screen, but it overlays the bootloader screen. I just want to get back to stock, then upgrade to 4.3. I've tried to install adb on my computer, but couldn't get the computer to recognize the device.
Click to expand...
Click to collapse
Install this through device manager.
http://d-h.st/kDu
Username invalid said:
Install this through device manager.
http://d-h.st/kDu
Click to expand...
Click to collapse
Okay, it's installed. I'm not sure what I should unzip though?
chrisbo4 said:
Okay, it's installed. I'm not sure what I should unzip though?
Click to expand...
Click to collapse
You can either flash stock images with fastboot or install TWRP then flash stock zip file.
chrisbo4 said:
I'm trying to update my wife's N7 to 4.3. She used a toolkit to root and has TWRP recovery. Everything else is stock. So first I downloaded the 4.3 update and attempted to flash, but immediately after choosing "install" I received a message the the flash failed. I thought maybe I got a bad download, so I rebooted the device and forced an OTA. The device downloaded the OTA, but then rebooted to TWRP and didn't install. Then I thought maybe I need to have stock recovery... So I unrooted, and installed stock recovery. I then forced the OTA again, downloaded, and began to install in stock recovery, and approximately halfway through it stopped and gave an error message. Then the device rebooted on it's own. I'm not sure what to do at this point. I was able to update to 4.3 on my N4 without any issues. Does anyone have a solution for me? Please let me know if there is some detail I left out. Thanks!
Click to expand...
Click to collapse
First of all I do not intend to offend you. I am not lecturing. I just want to give you my opinion in order to try to help you.
In general to install an update the safest way is to have or re-install stock recovery prior to the installation of the update. There is no need to unroot for the stock recovery installation.
In your household you have Nexus products. It means that you will probably continue to acquire Nexus equipment. In this case, in the long run, you will be better off installing, learning, and using adb and fastboot methods. Toolkits are mostly a quick fix which works ...............or not. I am thinking that toolkits are useless in the sense that they do not bring knowledge and experience (in my area trash collection are Monday and Thursday:laugh.
The XDA forum is full of resources. It does not leave a stone unturned. Its a matter of reading, asking, and learning.
In your case, facing your problem, I would install adb through a program called "android-sdk- windows". Then I will take advantage of the experience and the knowledge of our forum members to install the JB 4.3 factory image.
here are two references among several:
http://forum.xda-developers.com/showthread.php?t=1907796
http://forum.xda-developers.com/showthread.php?t=1781250
But it is a long way for a beginner - which I was 2-3 years ago - to go this route. But what a reward!
gunner1937 said:
First of all I do not intend to offend you. I am not lecturing. I just want to give you my opinion in order to try to help you.
In general to install an update the safest way is to have or re-install stock recovery prior to the installation of the update. There is no need to unroot for the stock recovery installation.
In your household you have Nexus products. It means that you will probably continue to acquire Nexus equipment. In this case, in the long run, you will be better off installing, learning, and using adb and fastboot methods. Toolkits are mostly a quick fix which works ...............or not. I am thinking that toolkits are useless in the sense that they do not bring knowledge and experience (in my area trash collection are Monday and Thursday:laugh.
The XDA forum is full of resources. It does not leave a stone unturned. Its a matter of reading, asking, and learning.
In your case, facing your problem, I would install adb through a program called "android-sdk- windows". Then I will take advantage of the experience and the knowledge of our forum members to install the JB 4.3 factory image.
here are two references among several:
http://forum.xda-developers.com/showthread.php?t=1907796
http://forum.xda-developers.com/showthread.php?t=1781250
But it is a long way for a beginner - which I was 2-3 years ago - to go this route. But what a reward!
Click to expand...
Click to collapse
Thank you for the information, and I'm not offended at all. I spent most of last night reading, and attempting to get adb running on my computer. I experienced issues getting drivers installed, and the computer recognizing the device. Also, trying to find the directories... I'll keep searching to see if I can get this figured out. Thank you again!
Thanks to everyone for helping me through this problem. After a lot of searching, research, reading, and video tutorials, I flashed stock images to the N7 via fastboot. I always thought that adb and fastboot was way too advanced for me (and it probably still is), but at least I got the basics down. Thank you all again.
Hi, I have a fully stock nexus 7 1st gen which is stuck on a boot loop, I am able to get it into fast boot mode where I've tried the wipe data/factory reset and wipe cache partition but it just freezes. I've searched around for solutions I've even tried flashing the stock images with wugfresh toolkit with no luck, most fixes it seems need the debugging enabled on the device which I can't do because I can't get into the menu. If anyone can help me it would be fantastic
mikebolton said:
Hi, I have a fully stock nexus 7 1st gen which is stuck on a boot loop, I am able to get it into fast boot mode where I've tried the wipe data/factory reset and wipe cache partition but it just freezes. I've searched around for solutions I've even tried flashing the stock images with wugfresh toolkit with no luck, most fixes it seems need the debugging enabled on the device which I can't do because I can't get into the menu. If anyone can help me it would be fantastic
Click to expand...
Click to collapse
Hey Mike, it sounds like you have no other option than to restore back to factory using the official Google Factory Images. That will completely wipe your N7, SDCard and all
Go ahead and download the nakasi image of your choice from Google: https://developers.google.com/android/nexus/images#nakasi... make sure that you don't accidentally get the nakasig firmware as it is for the Tilapia 3G model.
Extract it with 7-zip or WinRar (or whatever) and with your tablet plugged in and in Fastboot Mode, (you will also need the fastboot/ADB drivers installed) run the flash-all.bat batch file. (You may need to enable the Windows function "Show File Extensions" to see the .bat part after the file name. There is also a flash-all.sh in the folder as well but that one is for Linux users so you wont be able to use it unless you're on Linux.
Good Luck! :good:
Hi Tim, Thanks for replying,
I'm not too worried about losing data I'm just desperate to get it working again.
I have downloaded the flash image but where would I find the download for the fast boot drivers?
mikebolton said:
Hi Tim, Thanks for replying,
I'm not too worried about losing data I'm just desperate to get it working again.
I have downloaded the flash image but where would I find the download for the fast boot drivers?
Click to expand...
Click to collapse
They should be included in the Wugfresh Toolkit that you downloaded. Just follow the steps to install the device drivers and I believe that the Fastboot drivers installs with it.
How weird, I am fixing my Dad's tonight, exact same issue! Have had it a week or so but just found time to do it now... I will do with you if you like. I already downloaded the wugfresh NRT and worked through the steps, obviously missing out the debug mode parts. Currently downloading the nakasi kot49h which is taking a while, so came on here to see what to do if this fails and saw your post!
Sent from my Nexus 5 using xda app-developers app
---------- Post added at 11:29 PM ---------- Previous post was at 11:24 PM ----------
If you download the nexus root kit v1.8.2 from www.wugfresh.com follow the steps on there to uninstall various drivers, then click the initial setup - full driver installation to get the correct driver for your device.
Sent from my Nexus 5 using xda app-developers app
In the wug toolkit when installing drivers step by step guide to configure MTP drivers you need to disable USB debugging then disable MTP mode then re enable debugging all of which I can't do because I can't get into the menu to do anything
Hi Tom,
I can't seem to figure it out ive tried the wug toolkit a number of time with no results it seems most fixes need you to be able to enable debugging, if you find out how to do it let me know and if I by some miracle get it working I'll let you know
I have just run the flash stock and unroot option on wugfresh in the log everything has been erased but when it has tried to send bootloader is says failed<remote: bootloader is locked.>
Yes, you are up to where I got to. I fixed mine last night eventually. Next I tried a risky extra step which I won't tell as I don't think it did anything, then directly on the left of Flash and unroot there is a button to unlock bootloader. Run that, it gave me an error message but appeared to do the trick because the next time I ran flash + unroot it worked finally. Let us know how you get on!
Sent from my Nexus 5 using xda app-developers app
No it still isn't working everything I try doesn't work it all comes down to the locked bootloader and no matter what I do I can't find a solution to open it
Has anyone come across the same problem and found a solution?
mikebolton said:
No it still isn't working everything I try doesn't work it all comes down to the locked bootloader and no matter what I do I can't find a solution to open it
Has anyone come across the same problem and found a solution?
Click to expand...
Click to collapse
Open a command prompt in the folder with Fastboot. Type in "fastboot oem unlock" without quotes. That will unlock the bootloader and also you to flash factory image.
Doesn't work I've tried it before it just comes up with unlock bootloader screen where you have a choice yes (may void warranty) or no I click yes then I am directed back to fastboot mode with a message at the top left corner saying unlocking now....... but nothing ever happens, I restart device and I'm back to where I started.
Someone must know how to fix this