[Q] Wrong Update!!! - Huawei Ideos X5 U8800

I haave a huawei u8800pro and i updated it to 2.3.5 but it seems that the update is for the u8800pro brother ... the ideos x5 ..then i tried to update it to 4.0 and it didn work.. so now when i start the phone it freezzes after 30 secs .. and i dont know how to fix that back .. im new on android .. please help me !!! Ty (sorry about my english, im dooing my best)

If it' s not completely dead, maybe you can flash the suitable for your moder, official rom.
So try it.

dancer_69 said:
If it' s not completely dead, maybe you can flash the suitable for your moder, official rom.
So try it.
Click to expand...
Click to collapse
Well for me I think I installed the wrong replaced the cust.img with the wrong one. Now my phone no longer has the home screen so can't access the menu and also I don't have the original cust.img that I had replaced. Help please

Again, flash the official rom for U8800. cust.img is part of the rom, so if you flash the rom will be replace the wrong one.

I have tried re-installing official gingerbread but it fails to install

Related

[Q] Help Firmware

Hello people!
I'm new in the forum.
I update my phone to the last firmware Original 2.1 SE ROM 2.1.1.C.0.0.
previously i had installed in the phone Minicm6 but i update to the new stock rom to see how fast it is.
But i dont like very much.
I need help to go back to the minicm6 or other rom.
the most rom's we need this firmware 2.1.1.A.0.6
i have install xrecovery in my SE X8.
how i flash the rom with this firmware 2.1.1.C.0.0.?
thanks
p.s sorry my bad English.
You can use flashtool to go back to 2.1.1.A.0.6
Click here for details (It doesn't matter if your phone is not bricked)
are another way to do ?
No. But you don't need go back to 2.1.1.A.0.6 firmware. I installed ROMs on 2.1.1.C.0.0 without problems
OK Thanks.

[Q] Simply ROM question

Hey just wanted to Ask what rom u recommend Or use for the tattoo?
I do not recommend, but only to preach the ROM CyanogenMod 7.1.0RC1 2.3.4 Gingerbread good for htc Tattoo
I use my own repacked version of nFinityGB, I can strongly recommend that
hey guys i am a newbie here....pls help me out.....
i rooted my htc tattoo by using `the unlockrs` guide...amon ra`s recovery..
i did a NANDROID backup...then wiped factory data....all ok....
problem is when i try to install cm7 for tattoo....its loads upto the middle and then says
`sdcard/ (name of the rom).zip ` and then `installation aborted`....
pls help me out....i tried other roms but still the same...pls help....
waiting eagerly for a reply.....
i think i did smthing wrong...i downloaded rom manager and then installed clockworkmod recovery.....when trying to install cm7 from sdcard....i selected only wipe factory data and ok....i didnt select backup current rom....soo my tattoo is now been 30 mins and stuck at `tattoo` screen and not booting....
pls help....have i bricked my phone ?!
CyanogenMod Gingerbread
ishanindia007,
did you try to reinstall cm7?

[Q] Plz help [Bricked my defy]

Hi guys, i know that are a lot of "bricked my defy" but i couldn't fix it plz help.
I have the black screen and RSD recognize it, i flashed so many sbf, i can't tell u what.
Thx in advaned
Have a read of this thread http://forum.xda-developers.com/showthread.php?t=1627350
I got it done, but now it named it ME525 not MB525, how can i change it back, and i want to flash an europe sbf, the only one that works is china unicome 2.13
Depending on your kernel try to install these chinese ROM that can downgrade your ROM from whatever kernel you are having now and after that root device install 2init and after you can install whatever ROM you want....I used CyanogenMOD
link to post where you can find info:
http://forum.xda-developers.com/showthread.php?t=1604187
marius.roibu said:
Depending on your kernel try to install these chinese ROM that can downgrade your ROM from whatever kernel you are having now and after that root device install 2init and after you can install whatever ROM you want....I used CyanogenMOD
link to post where you can find info:
http://forum.xda-developers.com/showthread.php?t=1604187
Click to expand...
Click to collapse
(multumesc frumos , si eu sunt Roman), Thx Marius.. I solved it yesterday, it was a good fight .
In your opinion wich ROM is more stable, i have now the Pikatchu and its awesome, no FC.

[Q] IMAGE folder

Hi guys... I'm an italian member... i've a really big problem with my huawei u8800pro... i have blue screen when i put on my phone normally and with volume + OR volume -... i have pink screen when i put on it with volume - AND +... when i connect my phone to the pc i don't find IMAGE folder... so i think it's this my problem... so can someone of you put a backup of his IMAGE folder? (i had ICS 4.0.3 so put this but put a copy of froyo 2.2 because i think it's probably work)
thank you
RiccGava said:
Hi guys... I'm an italian member... i've a really big problem with my huawei u8800pro... i have blue screen when i put on my phone normally and with volume + OR volume -... i have pink screen when i put on it with volume - AND +... when i connect my phone to the pc i don't find IMAGE folder... so i think it's this my problem... so can someone of you put a backup of his IMAGE folder? (i had ICS 4.0.3 so put this but put a copy of froyo 2.2 because i think it's probably work)
thank you
Click to expand...
Click to collapse
Is it official ics or a custom ics? You formatted your boot folder.
Secondly, is it windows, ubuntu or mac os?
Did you make a disc image backup?
Did you upgrade directly to 4.0 from 2.2?
Your adb drivers are not correctly installed. There is a backup method but i can't seems to find it.
It is a custom ICS... i've upgraded the original firmware fo the phone (Froyo 2.2) to Gingerbread 2.3.5 and then to ICS 4.0.3...
my computer is a windows 7 but i can use a mac os too...
no i didn't do a disc image backup...
i don't know but if you say it... what can i do now?
First is good to mention what phone you have to avoid confiusion. Probably you have a normal U8800(ICS official exists only for pro/plus model).
If you have official 2.3.5 as base, you cannot put the Image folder from Froyo, you need the image fodler of 2.3.5(gingerbread), or from a custom rom builded with official 2.3.5 as base. You can also reflash the official 2.3.5.
no no... i have a Huawei u8800Pro (it's written behind the battery too)...
Please can you link me an Image folder of a phone based on gingerbread and say me what and HOW to do?
dancer_69 said:
First is good to mention what phone you have to avoid confiusion. Probably you have a normal U8800(ICS official exists only for pro/plus model).
If you have official 2.3.5 as base, you cannot put the Image folder from Froyo, you need the image fodler of 2.3.5(gingerbread), or from a custom rom builded with official 2.3.5 as base. You can also reflash the official 2.3.5.
Click to expand...
Click to collapse
read my new members link in SIG...
RiccGava said:
no no... i have a Huawei u8800Pro (it's written behind the battery too)...
Please can you link me an Image folder of a phone based on gingerbread and say me what and HOW to do?
Click to expand...
Click to collapse
Let me look around
Sent from my u8800-51 using xda premium.

From Zero to Hero (2.2.2 to auroraSP)

Hello Xda forum Members,
I'm writing couse everything is changing so fast and i don't want to make any mistake...
i just bought U8800 and i think its rly good Smarthphone.
Would any of U be that kind and help me with this mobile.
My android version is 2.2.2, stock everything.
I have Windows 7 laptop and Windows 8 on PC.
What i want ?
I want in safest possible way do all things to my device runs smoother and faster also without any bugs and locks.
Can someone explain exactly withs is best way to recover root and clockwork my mobile also how can i make it run 1ghz and I want install AuroraSP.
i found few ways to root device but don't wanna rush it thats why I'm asking someone much more experienced
what should i do 1st and last to be happy owner of working android with AuroraSP inside. ( or other if thats bad )
please send working links for download.
thanks for help cheers
here you go..
Wicio0 said:
Hello Xda forum Members,
I'm writing couse everything is changing so fast and i don't want to make any mistake...
i just bought U8800 and i think its rly good Smarthphone.
Would any of U be that kind and help me with this mobile.
My android version is 2.2.2, stock everything.
I have Windows 7 laptop and Windows 8 on PC.
What i want ?
I want in safest possible way do all things to my device runs smoother and faster also without any bugs and locks.
Can someone explain exactly withs is best way to recover root and clockwork my mobile also how can i make it run 1ghz and I want install AuroraSP.
i found few ways to root device but don't wanna rush it thats why I'm asking someone much more experienced
what should i do 1st and last to be happy owner of working android with AuroraSP inside. ( or other if thats bad )
please send working links for download.
thanks for help cheers
Click to expand...
Click to collapse
for rooting on froyo.. i think you can use an app called z4root.. i think its on playstore not sure..if not try too google and find it.
upgrade to gingerbread
http://forum.xda-developers.com/showthread.php?t=1369296
after upgrade to gingerbread...rooting etc
http://forum.xda-developers.com/showthread.php?t=1420728
I would recommend that after rooting and installing a custom recovery (ClockworkMod) you should make a full nandroid(complete OS + data) backup and keep it safe on your pc or sd card before you do anything else.
once you have are rooted have a custom recovery.. and a nandroid backup you are ready!..
remember.. when flashing ROMS.. check the baseband..which means.. if you are on gingerbread ROM.. official or otherwise.. you can flash any gingerbread ROM.. if you want to flash a ROM based on ICS.. you should get on ICS baseband.. for that you need to upgrade to official ICS.. then you can flash whatever ICS ROM you want..
as for flashing instructions... the ROM builder will have included that.. so read it.
Hope i helped!
Thank u
I'll do exactly what u said wish me luck to not broke my device
thank u,
also huawey link with soft 528 is Chinese i cant understand Chinese
newest I found on hauwey side is 526, should I install 526 or 528?
when i tried to download SuperOneClick v2.3.3 it download some other exe file, is that right ?
it would be nice to Add Sticky topic to forum with everythin workin and updated like my post but Im not able to do it couse Im a bit newbie if it comes in android.
what tha
- Some phone gets imei=0 (please backup your imei)
with official upgrade ... da f?
is there any way to get fully working auroraSP on huawey or its russian rullete ?
step by step ... ;/
finally
I managed to do it with Forumber2 help (thanks Again)
OK I installed b526 from internal then I installed b518 from internal then +/- volume and power pressd long till pink ... connect to pc change image recovery.img to TWR 2.6, then I made backup, next step was put zip file with auroraSP on internal ... then wipe andwanced dalvik cache data ... wiped ... install zip choose .zip
all Fine thanks anyone helpd me

Categories

Resources