Related
I'm trying to install baconbits on my G2 and I have a mac. I cannot seem to get the recovery image to work through fastboot. Help?
I can access the phone through the terminal but once I command it to reboot to the bootloader I can't get it to find the img file
There's a fastboot binary available for download from this page: http://developer.htc.com/adp.html
I have the binary in my sdk's tools folder but I still can't figure it out. Where/how do input the command to boot the img file?
pak256 said:
I have the binary in my sdk's tools folder but I still can't figure it out. Where/how do input the command to boot the img file?
Click to expand...
Click to collapse
You can flash files from recovery if they are on the SD card. You can either adb push while in recovery, or mount USB storage and tranfer the file. Or just transfer it via USB while the phone is on (big, green android screen)
I'm not sure how to install baconbits, but I think you need fastboot to flash the .img file. Recovery flashes .zip files and fastboot flashes .img files. You can put fastboot-mac in the same folder as adb... then fastboot flash recovery your_recovery.img. You really don't need adb (for this) since you can boot into fastboot on the phone by restarting while holding down the trackpad button.
These might be the droids you are looking for...
Code:
adb (read the instructions)
adb devices (you'll see your phone if it's plugged in, turned on, and in the proper mode)
adb reboot bootloader (white screen with androids on skateboards)
fastboot-mac (more reading...)
fastboot-mac devices (your phone again)
fastboot flash recovery your_recovery.img
fastboot reboot-bootloader
For some reason, I had a little trouble flashing my recovery- sometimes it would hang and wouldn't flash, sometimes it would only fastboot boot. So if you run into trouble, there might be other problems.
While you are at it, you might as well save yourself the trouble and either add the adb and flashboot folders into your path, or put the binaries somewhere in your path. I also renamed fastboot-mac to fastboot for simplicity.
Going to try that when I get out of class but I think you helped me realize what I was doing wrong. Thanks and will let you know if it works
Sent from my T-Mobile G2 using XDA App
Okay I could get the fastboot prompts to work but when I try to flash the recovery it tells me "g2recovery.img" could not be loaded
okay, used clockwork and got it to work. yay!
N4 is broken, but I can use adb commands by going into recovery mode. I'd like to fully wipe the device and install the JWR66Y factory image (which is currently saved on my PC as a .tar file). I'm kind of an adb newb/idiot. I would greatly appreciate any guidance here.
Thanks!
Can you use fastboot to flash stock?
http://androidforums.com/android-sy...e-how-flash-nexus-factory-image-manually.html
Swyped from my Nexus 4 using Tapatalk 4
ddb540 said:
N4 is broken, but I can use adb commands by going into recovery mode. I'd like to fully wipe the device and install the JWR66Y factory image (which is currently saved on my PC as a .tar file). I'm kind of an adb newb/idiot. I would greatly appreciate any guidance here.
Thanks!
Click to expand...
Click to collapse
Hey you might want to look at the Google Nexus Toolkit. You can sideload a file if you already have a custom recovery installed.
http://forum.xda-developers.com/showthread.php?t=1995688
Good luck!
Lord Yurij said:
Can you use fastboot to flash stock?
http://androidforums.com/android-sy...e-how-flash-nexus-factory-image-manually.html
Swyped from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
Thank you for the response. Was able to push the jwr66y image to the device using adb in recovery mode. Then, did the following:
fastboot boot boot.imdg
fastboot system jwr66y.imdg
fastboot erase userdata
fastboot erase cache
fastboot reboot
Now device is stuck in boot loop. Suggestions?
Thanks!
ddb540 said:
Thank you for the response. Was able to push the jwr66y image to the device using adb in recovery mode. Then, did the following:
fastboot boot boot.imdg
fastboot system jwr66y.imdg
fastboot erase userdata
fastboot erase cache
fastboot reboot
Now device is stuck in boot loop. Suggestions?
Thanks!
Click to expand...
Click to collapse
How did the command "fastboot system" even work?
When you flash an image, the command is the following:
Fastboot flash boot boot.img
Fastboot flash system system.img
Fastboot flash userdata userdata.img
Etc.
Anyways, you could have simply downloaded a rom, boot in recovery, use "adb push" to copy the file on your phone, then install it normally through your recovery.
abaaaabbbb63 said:
How did the command "fastboot system" even work?
When you flash an image, the command is the following:
Fastboot flash boot boot.img
Fastboot flash system system.img
Fastboot flash userdata userdata.img
Etc.
Anyways, you could have simply downloaded a rom, boot in recovery, use "adb push" to copy the file on your phone, then install it normally through your recovery.
Click to expand...
Click to collapse
Sorry, I typed incorrectly. Yes, I did fastboot flash system system.img, etc.
ddb540 said:
Thank you for the response. Was able to push the jwr66y image to the device using adb in recovery mode. Then, did the following:
fastboot boot boot.imdg
fastboot system jwr66y.imdg
fastboot erase userdata
fastboot erase cache
fastboot reboot
Now device is stuck in boot loop. Suggestions?
Thanks!
Click to expand...
Click to collapse
Try to go into recovery and wipe the caches and do a data factory reset, that will probably work.
Convert a tar.md5 file to .img
gee2012 said:
Try to go into recovery and wipe the caches and do a data factory reset, that will probably work.
Click to expand...
Click to collapse
Most flashable files come as a tar.md5 for use with odin. What do you do with a tar.md5 file if you want to flash it with adb? It appears that adb requires .img files.
My reason for wanting an .img file is that I tried flashing a stock recovery with odin and got an "MD5 Error, Binary is invalid". I have no idea what that means. I just figured I would try the adb approach since I need to learn adb anyway.
I would rather solve the "MD5 Error, Binary is invalid" error and proceed with odin. Since I am a noob, I don't know exactly how to proceed. Can anyone help me resolve this?
Thanks,
AHLASSICH said:
Most flashable files come as a tar.md5 for use with odin. What do you do with a tar.md5 file if you want to flash it with adb? It appears that adb requires .img files.
My reason for wanting an .img file is that I tried flashing a stock recovery with odin and got an "MD5 Error, Binary is invalid". I have no idea what that means. I just figured I would try the adb approach since I need to learn adb anyway.
I would rather solve the "MD5 Error, Binary is invalid" error and proceed with odin. Since I am a noob, I don't know exactly how to proceed. Can anyone help me resolve this?
Thanks,
Click to expand...
Click to collapse
Odin? That's for samsung mate. Won't work here. You need to download the factory images and extract it to get stock recovery. Or just head over to general section and there are thread for flashable stock recovery/modem/kernel. There is also a guide on how to use adb, a very detailed one at that. I'm sure you won't have trouble following it. Just read carefully and do it. All the things you need are given in that thread.
Edit: Guide - http://forum.xda-developers.com/showthread.php?t=2010312
AHLASSICH said:
Most flashable files come as a tar.md5 for use with odin. What do you do with a tar.md5 file if you want to flash it with adb? It appears that adb requires .img files.
My reason for wanting an .img file is that I tried flashing a stock recovery with odin and got an "MD5 Error, Binary is invalid". I have no idea what that means. I just figured I would try the adb approach since I need to learn adb anyway.
I would rather solve the "MD5 Error, Binary is invalid" error and proceed with odin. Since I am a noob, I don't know exactly how to proceed. Can anyone help me resolve this?
Thanks,
Click to expand...
Click to collapse
1. Make sure you have Android SDK installed. if not download here.
2. Download Nexus 4 factory rom from here.
3. Unzip the factory rom [occam-kot49h-factory]. If you dont know how to unzip. Download and install Winrar. Open the file with Winrar and Extract it somewhere in your computer.
4. Turn off your phone
3. Hold Volume up + Power; once it loads up to bootloader; connect it to your computer
5. The file [occam-kot49h-factory] you extract it early; in there you should see a file flash-all-bat. Open it [run it as admin if you are running Vista/7/8] and let it do its magic. Your phone will factory reset.
http://www.wugfresh.com/nrt/
go to this website, download the toolkit, and connect your nexus to computer on fastboot mode, do some few clicks, and boom, done
Had a problem with audio playback (volume always high no matter what). Decide to flash. PAC for my Sprint LS980. I see this:
Seems to be a lot of confusion so I'll clear things up..
ZV7->ZV8->ZVA is how the ota history goes, with ZVB on the way.
If you're on stock ZVA, your aboot (bootloader) may not be downgraded, in that case, use FreeGee from Play Store to install a recovery, it will automatically downgrade your aboot.
if you have the ZVA Radio, just flash furnace or dr87's kernel after you flash an AOSP ROM, all done.
Click to expand...
Click to collapse
Sorce: http://forum.xda-developers.com/showthread.php?t=2669074
Seeing the last sentance, I think that if I flash ZVA Radio, SlimKat ROM (the one that causes me problems) and then dr87's kernel I could try a ZVA experience. I flashed SlimKat again becuase I was going to change anyway, I wanted to try it with ZVA.
Tell myself why not, I do it.
Fails but I didnt pay much attention. I reboot.
Stuck in fastboot mode and cant escape. Recovery is a no-go.
Tried flashing both ZV7aboot.img and twrp2.6.3.0.img into their appropriate partitions (boot and recovery).
Still having problems, but now I cant do any button combination (except DownloadMode. Cant turn off) after ZV7aboot.img flash.
I dont want to erase my memory (~26GB of valuable data). Is there a way to flash a ZV8Radio.zip from fastboot? I think thats my problem, but Im not too sure. Just access to recovery would allow my to fix my problems.
Thanks anyone for any help! I think I really screwed myself over this time. Thanks everyone!
Edit: Anyone know where to get a boot.img and system.img for the Sprint LS980?
zv7_aboot.img isn't a boot.img, it's the bootloader. Use FreeGee to install twrp, it will handle the aboot for you. Then you can take advantage of the last sentence.
Savoca said:
zv7_aboot.img isn't a boot.img, it's the bootloader. Use FreeGee to install twrp, it will handle the aboot for you. Then you can take advantage of the last sentence.
Click to expand...
Click to collapse
I am stuck in fastboot. No recovery. Download mode is also accessable.
Which of the following would help:
* System.img and Boot.img (where to find em?)
* A kernel .img (Do they exist?)
* Flashing the ZV7 or 8 aboot.img oncemore with twrp.img again?
Thanks for coming to help! It means a lot.
RevolcFael4 said:
I am stuck in fastboot. No recovery. Download mode is also accessable.
Which of the following would help:
* System.img and Boot.img (where to find em?)
* A kernel .img (Do they exist?)
* Flashing the ZV7 or 8 aboot.img oncemore with twrp.img again?
Thanks for coming to help! It means a lot.
Click to expand...
Click to collapse
If you can boot into a rom, use FreeGee to install twrp. If you can't boot into rom and recovery, you need to flashtool.
Savoca said:
If you can boot into a rom, use FreeGee to install twrp. If you can't boot into rom and recovery, you need to flashtool.
Click to expand...
Click to collapse
Flashtools is asking for login and password. ?
Does this mean I have to wipe all user data in order to use it?
Edit: Do you know where System.img and Boot.img could be downloaded? I think its my only hope.
RevolcFael4 said:
Flashtools is asking for login and password. ?
Does this mean I have to wipe all user data in order to use it?
Edit: Do you know where System.img and Boot.img could be downloaded? I think its my only hope.
Click to expand...
Click to collapse
You didn't read the tutorial.
http://downloads.codefi.re/autoprime/LG/LG_G2
Savoca said:
You didn't read the tutorial.
http://downloads.codefi.re/autoprime/LG/LG_G2
Click to expand...
Click to collapse
Thanks for the link! That was extremely helpful.
What I did to gain access to twrp again was:
Download boot.img from the link.
Download aboot.img from link.
Download twrp.img (but this isnt necessary, file is already available on phone. No need.)
* Enter command 'fastboot flash boot boot.img'
* (If you hold power it starts showing LG Logo.)
* Go back to Fastboot. Enter command 'fastboot flash aboot aboot.img'
* Now TWRP access is regained! Phone doesnt boot normally, must flash ROM and stuff again.
Thanks a lot! This was an okay first fastboot experience.
Soft Bricked Sprint LS980?
Hello, I'm having a similar problem. I haven't had a phone for a couple years since tinkering with my Evo and thought I still knew what I was doing with my new G2. That proved to be incorrect.
I had it semi rooted. (I followed the instructions using Ioroot and Kingo) I wasn't able to change APN and use GSM for Metro PCS
After reading up about the spark patch I followed a tutorial (not very well obviously) and managed to get the phone will it will no longer boot.
I can get it into bootloader, and a frozen in download mode. otherwise it just hangs at the LG logo.
Is there a way to recover from bootloader?
I copied twrp-2.6.3.2-g2spr.img and zv7-aboot.img to the phone and did the following.
Here are the commands I used with the guide. I looks like I was using 2 different guides at once..... :/
Originally Posted by darkpoe View Post
This phone does not use Mass storage mode, it uses MTP, you will see it as a phone inside windows explorer and when you click into it you will see "internal storage" this internal storage is what I am referring to as the root of the sdcard (as they are as well)
Also, dont blame me if your phone dies, all this stuff will void your warranty of your phone and your toaster!
Hit the build number under about phone --> software until developer mode is enabled
goto developer mode turn on mtp mode
go download twrp from there site http://www.teamw.in/project/twrp2/197
I used kingo but cant link on xda ,, google it .. its on cnet as well
get http://koush.com/post/universal-adb-driver install (works on all windows)
get http://www.xda-developers.com/androi...oot-installer/has good quick adb install it
copy the downloaded openrecovery for sprint onto the phone directly into the "root" folder (root folder being like when you look at yoru C: drive in windows explorer that is the root folder under linux), when you plug into the pc, make sure in mtp mode
with phone still plugged in run kingo and root it
it will reboot
with phone plugged in run "adb usb" from command prompt on pc (from the link for adb that it installed, it will open a command prompt for you in the proper folder when you click it)
approve adb connection on phone
then run "adb shell" from command prompt on pc
type su, approve it on phone
paste this next line exactly at the prompt
********** this is the line I used from a different guide ***** dd if=/sdcard/zv7-aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
dd if=/sdcard/openrecovery-twrp-2.6.3.2-g2spr.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
let it flash
it will say bytes copied and you will be good
type reboot inside the shell
the phone will reboot
I use goo manager from play store to boot into recovery, I dont even know the key combo for it yet.
Any help would be appreciated, thank you.
---------- Post added at 02:59 AM ---------- Previous post was at 02:06 AM ----------
x_lord said:
Hello, I'm having a similar problem. I haven't had a phone for a couple years since tinkering with my Evo and thought I still knew what I was doing with my new G2. That proved to be incorrect.
I had it semi rooted. (I followed the instructions using Ioroot and Kingo) I wasn't able to change APN and use GSM for Metro PCS
After reading up about the spark patch I followed a tutorial (not very well obviously) and managed to get the phone will it will no longer boot.
I can get it into bootloader, and a frozen in download mode. otherwise it just hangs at the LG logo.
Is there a way to recover from bootloader?
I copied twrp-2.6.3.2-g2spr.img and zv7-aboot.img to the phone and did the following.
Here are the commands I used with the guide. I looks like I was using 2 different guides at once..... :/
Originally Posted by darkpoe View Post
This phone does not use Mass storage mode, it uses MTP, you will see it as a phone inside windows explorer and when you click into it you will see "internal storage" this internal storage is what I am referring to as the root of the sdcard (as they are as well)
Also, dont blame me if your phone dies, all this stuff will void your warranty of your phone and your toaster!
Hit the build number under about phone --> software until developer mode is enabled
goto developer mode turn on mtp mode
go download twrp from there site http://www.teamw.in/project/twrp2/197
I used kingo but cant link on xda ,, google it .. its on cnet as well
get http://koush.com/post/universal-adb-driver install (works on all windows)
get http://www.xda-developers.com/androi...oot-installer/has good quick adb install it
copy the downloaded openrecovery for sprint onto the phone directly into the "root" folder (root folder being like when you look at yoru C: drive in windows explorer that is the root folder under linux), when you plug into the pc, make sure in mtp mode
with phone still plugged in run kingo and root it
it will reboot
with phone plugged in run "adb usb" from command prompt on pc (from the link for adb that it installed, it will open a command prompt for you in the proper folder when you click it)
approve adb connection on phone
then run "adb shell" from command prompt on pc
type su, approve it on phone
paste this next line exactly at the prompt
********** this is the line I used from a different guide ***** dd if=/sdcard/zv7-aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
dd if=/sdcard/openrecovery-twrp-2.6.3.2-g2spr.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
let it flash
it will say bytes copied and you will be good
type reboot inside the shell
the phone will reboot
I use goo manager from play store to boot into recovery, I dont even know the key combo for it yet.
Any help would be appreciated, thank you.
Click to expand...
Click to collapse
Found this: Worked like a charm.
–]rdsqc22 2 points 23 days ago
Alright, sorry to comment on something 3 months old, but I just had this problem and managed to solve it.
When in the mode described above, you are still able to use Fastboot. Get a linux computer and install fastboot.
Then, go here: http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zvc_partitions
Download the images for laf, aboot, boot, and recovery.
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot 6-boot.img
fastboot flash aboot 4-aboot.img
fastboot flash recovery 10-recovery.img
fastboot flash laf 11-laf.img
fastboot reboot
This fixed the problem for me. Good luck!
x_lord said:
Found this: Worked like a charm.
–]rdsqc22 2 points 23 days ago
Alright, sorry to comment on something 3 months old, but I just had this problem and managed to solve it.
When in the mode described above, you are still able to use Fastboot. Get a linux computer and install fastboot.
Then, go here: http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zvc_partitions
Download the images for laf, aboot, boot, and recovery.
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot 6-boot.img
fastboot flash aboot 4-aboot.img
fastboot flash recovery 10-recovery.img
fastboot flash laf 11-laf.img
fastboot reboot
This fixed the problem for me. Good luck!
Click to expand...
Click to collapse
Sorry for not replying, but I see you managed to fix your problem. All you needed to do was download .img files, then enter commands through fastboot. Although it is slightly more complicated than that, its the rough outline of what needs to be done to fix it. Nice work fixing your problem. I came back to this thread to remind myself of the commands that need to be entered (My comments help myself).
I think I am just going to copy-paste the quoted box above if anyone needs instructions how to do this. Thanks for the quick guide I can use to help others!
bricked , simple fix?
x_lord said:
Hello, I'm having a similar problem. I haven't had a phone for a couple years since tinkering with my Evo and thought I still knew what I was doing with my new G2. That proved to be incorrect.
I had it semi rooted. (I followed the instructions using Ioroot and Kingo) I wasn't able to change APN and use GSM for Metro PCS
After reading up about the spark patch I followed a tutorial (not very well obviously) and managed to get the phone will it will no longer boot.
I can get it into bootloader, and a frozen in download mode. otherwise it just hangs at the LG logo.
Is there a way to recover from bootloader?
I copied twrp-2.6.3.2-g2spr.img and zv7-aboot.img to the phone and did the following.
Here are the commands I used with the guide. I looks like I was using 2 different guides at once..... :/
Originally Posted by darkpoe View Post
This phone does not use Mass storage mode, it uses MTP, you will see it as a phone inside windows explorer and when you click into it you will see "internal storage" this internal storage is what I am referring to as the root of the sdcard (as they are as well)
Also, dont blame me if your phone dies, all this stuff will void your warranty of your phone and your toaster!
Hit the build number under about phone --> software until developer mode is enabled
goto developer mode turn on mtp mode
go download twrp from there site http://www.teamw.in/project/twrp2/197
I used kingo but cant link on xda ,, google it .. its on cnet as well
get http://koush.com/post/universal-adb-driver install (works on all windows)
get http://www.xda-developers.com/androi...oot-installer/has good quick adb install it
copy the downloaded openrecovery for sprint onto the phone directly into the "root" folder (root folder being like when you look at yoru C: drive in windows explorer that is the root folder under linux), when you plug into the pc, make sure in mtp mode
with phone still plugged in run kingo and root it
it will reboot
with phone plugged in run "adb usb" from command prompt on pc (from the link for adb that it installed, it will open a command prompt for you in the proper folder when you click it)
approve adb connection on phone
then run "adb shell" from command prompt on pc
type su, approve it on phone
paste this next line exactly at the prompt
********** this is the line I used from a different guide ***** dd if=/sdcard/zv7-aboot.img of=/dev/block/platform/msm_sdcc.1/by-name/aboot
dd if=/sdcard/openrecovery-twrp-2.6.3.2-g2spr.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
let it flash
it will say bytes copied and you will be good
type reboot inside the shell
the phone will reboot
I use goo manager from play store to boot into recovery, I dont even know the key combo for it yet.
Any help would be appreciated, thank you.
---------- Post added at 02:59 AM ---------- Previous post was at 02:06 AM ----------
Found this: Worked like a charm.
–]rdsqc22 2 points 23 days ago
Alright, sorry to comment on something 3 months old, but I just had this problem and managed to solve it.
When in the mode described above, you are still able to use Fastboot. Get a linux computer and install fastboot.
Then, go here: http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zvc_partitions
Download the images for laf, aboot, boot, and recovery.
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot 6-boot.img
fastboot flash aboot 4-aboot.img
fastboot flash recovery 10-recovery.img
fastboot flash laf 11-laf.img
fastboot reboot
This fixed the problem for me. Good luck!
Click to expand...
Click to collapse
this process (which i got from a different thread originally)
bricked my phone Lg G2 (Ls 980 sprint 32 gb)
i was on remote connection with my friend attempting all kinds of flashes (mostly custom roms and recoveries)
what he did
he FIRST flashboot erase aboot
and then erased all the other files
foolishly he then used fastboot reboot BEFORE reflashing the necessary images
this leaves me with a device that is practically 100% empty all hardware no software
i have no response no life not even a backlight EXCEPT
i can plug into windows and see Qdloader9008 is connected comport 3
and i can communicate with the device on ubuntu terminal although im not too farmiliar with terminal syntax so im not having much luck
im convinced it is as simple as reflashing at least a working recovery or download mode from which i can install everything else i nee
between QPST, Terminal, and or some other method
sorry for Noob ish ness
any help would be appreciated even if just help with a better understanding of what to do next
payment is possible
True2This said:
this process (which i got from a different thread originally)
bricked my phone Lg G2 (Ls 980 sprint 32 gb)
i was on remote connection with my friend attempting all kinds of flashes (mostly custom roms and recoveries)
what he did
he FIRST flashboot erase aboot
and then erased all the other files
foolishly he then used fastboot reboot BEFORE reflashing the necessary images
this leaves me with a device that is practically 100% empty all hardware no software
i have no response no life not even a backlight EXCEPT
i can plug into windows and see Qdloader9008 is connected comport 3
and i can communicate with the device on ubuntu terminal although im not too farmiliar with terminal syntax so im not having much luck
im convinced it is as simple as reflashing at least a working recovery or download mode from which i can install everything else i nee
between QPST, Terminal, and or some other method
sorry for Noob ish ness
any help would be appreciated even if just help with a better understanding of what to do next
payment is possible
Click to expand...
Click to collapse
Sorry, I barely understood what to do originally. What you have to do next is to reflash the aboot/boot/ whatever partitions but getting to that position might be difficult. Maybe some sort of command would allow you to connect to it oncemore?
Sorry, try to look into it more and see if a dev could help. Try posting something in /r/lgg2 but then again I cant be certain anything would happen. Good luck!
Easy guide
Since the problem keeps happening to people heres a quick tutorial I made.
Download and install this (PC only?)
Now go here. (D802) (D800) (LS980) (VS980) (D803) (Device tree/others)Download the images for laf, aboot, boot, and recovery.
Place the 4 .img files in the same folder. Control right click in that folded and open terminal. If this isn't how you open terminal in a folder search"how to open terminal in a folder".
(NOTE: Commands below will differ from the file names. Change the values in the parenthesis to match the files, HOWEVER, do not type the parenthesis into the terminal prompt! It will not work if you do.)
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot (6-boot.img)
fastboot flash aboot (4-aboot.img)
fastboot flash recovery (10-recovery.img)
fastboot flash laf (11-laf.img)
fastboot reboot
You should be fine now!
Unbrick Ls980 formatting partitions
Do this: (only for LS980)
1. Download the adb.zip file
2. Unzip in you computer the adb.zip file
3. Connect your phone LS980 to your computer
4. Run "particiones lg g2.bat"
5. Enter in download mode and flash the phone
6. enjoy your phone
Link of download
https://drive.google.com/file/d/0B6VmAym2TGdIRGJmSXFqdm84NU0/view?usp=sharing
RevolcFael4 said:
Since the problem keeps happening to people heres a quick tutorial I made.
Download and install this (PC only?)
Now go here. (D802) (D800) (LS980) (VS980) (D803) (Device tree/others)Download the images for laf, aboot, boot, and recovery.
Place the 4 .img files in the same folder. Control right click in that folded and open terminal. If this isn't how you open terminal in a folder search"how to open terminal in a folder".
(NOTE: Commands below will differ from the file names. Change the values in the parenthesis to match the files, HOWEVER, do not type the parenthesis into the terminal prompt! It will not work if you do.)
type the following commands in fastboot:
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot (6-boot.img)
fastboot flash aboot (4-aboot.img)
fastboot flash recovery (10-recovery.img)
fastboot flash laf (11-laf.img)
fastboot reboot
You should be fine now!
Click to expand...
Click to collapse
i tried this with almost all model files but still on fastboot any other option?>
I want to say thank you so much for this thread. Just got a new (refurb) G2 switching carriers to T-Mo and my idiot self used the wrong root program and soft bricked to fastboot. 4 .img files later and a few commands and I don't think I've ever been so happy to see a download screen on a phone...
juancho8207 said:
Do this: (only for LS980)
1. Download the adb.zip file
2. Unzip in you computer the adb.zip file
3. Connect your phone LS980 to your computer
4. Run "particiones lg g2.bat"
5. Enter in download mode and flash the phone
6. enjoy your phone
Link of download
https://drive.google.com/file/d/0B6VmAym2TGdIRGJmSXFqdm84NU0/view?usp=sharing
Click to expand...
Click to collapse
GREAT, You are a life saver :laugh:
juancho8207 said:
Do this: (only for LS980)
1. Download the adb.zip file
2. Unzip in you computer the adb.zip file
3. Connect your phone LS980 to your computer
4. Run "particiones lg g2.bat"
5. Enter in download mode and flash the phone
6. enjoy your phone
Link of download
https://drive.google.com/file/d/0B6VmAym2TGdIRGJmSXFqdm84NU0/view?usp=sharing
Click to expand...
Click to collapse
wow.. worked flawlessly... thank you very much :good::good::laugh::laugh:
(SOLVED) Hello, today i decided to root my phone( Galaxy Grand Prime SM-G530F)using odin but i guess i used the wrong file. Odin said ''Restart'' and nothing happened, then i unplugged my phone. I wish I hadnt done this
When i try to turn my phone on, I only can see download mode and i guess it is called ''bootloop''. It says ''could not do normal boot''. I couldnt solve this problem using Odin because Odin doesnt see/recognise/find my phone. I checked the USB port drivers and my wire but i still cant fix the problem. Please help me, I am so desperate and cant afford a new phone :crying:
Does your Phone have fastboot and is your phone recognized by fastboot?
If yes Download your Firmware from sammobile.com (Registration needed) and unpack it
At this point I want to state, that I'm not Responible for any Hard- or Software-Damage. I'm just trying to help, because I think, that it can't get any worse
Windows:
Open up cmd as Administrator
Go into the Folder where fastboot is installed
Copy all the extracted .img files into the fastboot-folder
Run the following commands:
fastboot.exe flash boot boot.img
fastboot.exe flash recovery recovery.img
fastboot.exe flash system system.img
fastboot.exe flash data data.img
If there are any other img files than these four, or if one of those four didn't exist, you are free to ask
Linux:
Open up terminal as root (or use sudo before every command)
Go into the folder, where all the img files are stored
Run the following commands:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash data data.img
If there are any other img files than these four, or if one of those four didn't exist, you are free to ask
Sent from my SM-G350 using XDA-Developers mobile app
TimSchumi said:
Does your Phone have fastboot and is your phone recognized by fastboot?
If yes Download your Firmware from sammobile.com (Registration needed) and unpack it
At this point I want to state, that I'm not Responible for any Hard- or Software-Damage. I'm just trying to help, because I think, that it can't get any worse
Windows:
Open up cmd as Administrator
Go into the Folder where fastboot is installed
Copy all the extracted .img files into the fastboot-folder
Run the following commands:
fastboot.exe flash boot boot.img
fastboot.exe flash recovery recovery.img
fastboot.exe flash system system.img
fastboot.exe flash data data.img
If there are any other img files than these four, or if one of those four didn't exist, you are free to ask
Linux:
Open up terminal as root (or use sudo before every command)
Go into the folder, where all the img files are stored
Run the following commands:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash data data.img
If there are any other img files than these four, or if one of those four didn't exist, you are free to ask
Sent from my SM-G350 using XDA-Developers mobile app
Click to expand...
Click to collapse
Wot? Samsung phones don't have fastboot lol
Anyway try to remove the battery and enter ODIN mode normally, this should do it.
Oh, crap, i forgot
Sent from my SM-G350 using XDA-Developers mobile app
fabiossilva21 said:
Wot? Samsung phones don't have fastboot lol
Anyway try to remove the battery and enter ODIN mode normally, this should do it.
Click to expand...
Click to collapse
I tried to remove the battery but it didnt work
tunasdf said:
I tried to remove the battery but it didnt work
Click to expand...
Click to collapse
OMG IT WORKED AFTER TRYİNG THOUSAND TİMES thank you so much
tunasdf said:
OMG IT WORKED AFTER TRYİNG THOUSAND TİMES thank you so much
Click to expand...
Click to collapse
No problem! Glad you managed to fix it! Now remember to flash the right file
Hi,
I made this post/thread because i couldn't find a solution to my problem through this forum and google.
Here is my trouble:
I was trying to install a twrp recovery and was following the instructions of a tutorial.
-So first i installed flashify and proceeded to a back up of the current kernel and current recovery
-Then downloaded a custom recovery image through TWRP release for my nexus 4
-After this i accidentally flashed the recovery image to boot instead of recovery
Now as you can guess the trouble is that my phone only boots to TWRP recovery instead of usual boot.
I tried to find aswers on this forum and google and yet i didn't find a solution.
I tried this post but without results:
http://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386
I would be grateful for any help and wish to recover this mistake without using a factory reset if possible.
Thank you, as you can see i am pretty new to this environment.
Can you get into fastboot mode? If yes, try flashing a stock Google rom and perform a factory wipe after installing the stock rom.
audit13 said:
Can you get into fastboot mode? If yes, try flashing a stock Google rom and perform a factory wipe after installing the stock rom.
Click to expand...
Click to collapse
Thank you for your answer, yes i can get into fastboost mode. As i am pretty new can you explain me how i can flash the stock Google rom (i guess it is the factory rom provided ?). Will this operation erase my data on the phone ?
Boot into fastboot and flash boot.img and recovery.img file from stock rom. Make sure you use the stock rom that matches the rom currently installed on your phone.
Ilovkos said:
Thank you for your answer, yes i can get into fastboost mode. As i am pretty new can you explain me how i can flash the stock Google rom (i guess it is the factory rom provided ?). Will this operation erase my data on the phone ?
Click to expand...
Click to collapse
Once in fastboot, extract the downloaded zip you got from Google. There you will find flash-all.bat Execute it as admin and wait. If it doesn't work, then extract the zip within the first zip and you should get loads of .img files. You will manually have to flash them. The commands are a bit different for each partition. They go like this:
Code:
fastboot flash system system.img
fastboot flash recovery recovery. img
fastboot flash cache cache.img
fastboot flash boot boot.img
fastboot flash data userdata.img
Note that if your cmd/terminal isn't open from the directory where the files are you will have to input it's location, for example
Code:
fastboot flash recovery C:\Users\YOURUSER\Desktop\recovery.img
Also note that there must be no spaces neither in the file name or the directories where the file is located, otherwise it probably won't flash.
Also yes, doing this will completely revert you to stock, and you WILL loose all your data. You could try just reflashing recovery.img and then flashing TWRP over it. If you can get to TWRP after this, then connect the USB cable to your PC and transfer all the data you need, after which I recommend flashing to stock. You can root and/or flash custom ROMs after this.
However in your case I think you don't have to completely go back to stock. Just try flashing the proper boot and recovery images over fastboot like I explained above and try booting then.
nerotNS said:
Once in fastboot, extract the downloaded zip you got from Google. There you will find flash-all.bat Execute it as admin and wait. If it doesn't work, then extract the zip within the first zip and you should get loads of .img files. You will manually have to flash them. The commands are a bit different for each partition. They go like this:
Code:
fastboot flash system system.img
fastboot flash recovery recovery. img
fastboot flash cache cache.img
fastboot flash boot boot.img
fastboot flash data userdata.img
Note that if your cmd/terminal isn't open from the directory where the files are you will have to input it's location, for example
Code:
fastboot flash recovery C:\Users\YOURUSER\Desktop\recovery.img
Also note that there must be no spaces neither in the file name or the directories where the file is located, otherwise it probably won't flash.
Also yes, doing this will completely revert you to stock, and you WILL loose all your data. You could try just reflashing recovery.img and then flashing TWRP over it. If you can get to TWRP after this, then connect the USB cable to your PC and transfer all the data you need, after which I recommend flashing to stock. You can root and/or flash custom ROMs after this.
However in your case I think you don't have to completely go back to stock. Just try flashing the proper boot and recovery images over fastboot like I explained above and try booting then.
Click to expand...
Click to collapse
Thanks to both of you I managed to fix this just by flashing the boot.img of the Google factory img. It didn't erase my data except my messages which is nice.