Database Users

[Q] bluetooth

Kyrillos dear please help me my bluetooth is activated and stops working after a while I flashed my rom with the galaxy i5800 5.0 beta ... Yours faithfully

Muran bro can yu explain fully...what type of problem you facing..??? means some error or something else???
Sent from my GT-I5800 using XDA App

just turn on bluetooth works fine but then stops but the icon remains on ... wrapped function to happen ke 5 -6 hours and then goes off

murano84 said:
just turn on bluetooth works fine but then stops but the icon remains on ... wrapped function to happen ke 5 -6 hours and then goes off
Click to expand...
Click to collapse
it should be a kernal problem..!! what rom are you on??!!

Rom the kirillos 5.0 beta... help me

did you check the visibility option?

I checked it ... the problem is that as soon as I turn it works after a while does not work anymore ...

murano84 said:
I checked it ... the problem is that as soon as I turn it works after a while does not work anymore ...
Click to expand...
Click to collapse
It might be a Kernel related problem... Wait until Kyrillos' releases his final version and it should be fixed.

ok I can wait for the release but the problem is that I have tried other ROM has made ​​me the same problem

murano84 said:
ok I can wait for the release but the problem is that I have tried other ROM has made ​​me the same problem
Click to expand...
Click to collapse
Try flashing back a stock rom. if the problem persists again then samsung care center is your destiny
Acid lestitious 2.0. Fugumod 2.2

Explain please

murano84 said:
Explain please
Click to expand...
Click to collapse
you said that you flashed other rom and yet you faced the problem!! That means that either there is some problem with the roms or with your internal bluetooth hardware!! if it is the latter then u may need samsung care centre to replace your hardware!!
just try flashing the stock 2.1 or 2.2 rom!! which means the rom that you were on by default!!

in support for pro galaxy should I put the original rom right ... how do you??

murano84 said:
in support for pro galaxy should I put the original rom right ... how do you??
Click to expand...
Click to collapse
just flash your original firmware..!

and where is it?

murano84 said:
and where is it?
Click to expand...
Click to collapse
Here
http://forum.xda-developers.com/showthread.php?t=1063940
Acid lestitious 2.0. Fugumod 2.2

could be a clue that if I change the bluetooth file dbus.conf me last longer??

toc toc toc

murano84 said:
could be a clue that if I change the bluetooth file dbus.conf me last longer??
Click to expand...
Click to collapse
Sorry i couldnot get you.. Pls explain more
Acid lestitious 2.0. Fugumod 2.2

meaning if I change the file extension or change the files in the bluetooth works more

[Q] SMS messaging doesnt work!! HELP!!!

Soo, I rooted my xperia x10 and I flashed the CM 6.1.3 froyo by achotjan v03 ROM and I tried send a sms message but all it says is "sending" and it won't send. I tried sending a sms message to my xperia x10 but i didnt recieve the message. If anyone knows about this error, please reply!

Could be you're using the wrong baseband or your APN settings.

x10 2.2 user said:
Soo, I rooted my xperia x10 and I flashed the CM 6.1.3 froyo by achotjan v03 ROM and I tried send a sms message but all it says is "sending" and it won't send. I tried sending a sms message to my xperia x10 but i didnt recieve the message. If anyone knows about this error, please reply!
Click to expand...
Click to collapse
Are you on bb52 or 65
Sent from my X10i using XDA App

I had the same problem. I found out it is caused by autorun manager apk. If you the same apk installed try enabled programs that self restarted.
Sent from my X10i using XDA App

x10 2.2 user said:
Soo, I rooted my xperia x10 and I flashed the CM 6.1.3 froyo by achotjan v03 ROM and I tried send a sms message but all it says is "sending" and it won't send. I tried sending a sms message to my xperia x10 but i didnt recieve the message. If anyone knows about this error, please reply!
Click to expand...
Click to collapse
I also experience this with EWJet ROM (which version i forgot, the one release early June). I follow the exact method provided in the post. When you have this symptom, you cannot receive SMS at all. Then I gave up, since i was waiting for important SMS, and reflash with stock again.
agentJBM said:
Could be you're using the wrong baseband or your APN settings.
Click to expand...
Click to collapse
APN is only for internet purpose. Could be because of baseband or custom kernel.
When you want to use custom firmware which come with custom kernel, make sure you have latest X10 xRecovery installed to boot the custom kernel.

When you want to use custom firmware which come with custom kernel, make sure you have latest X10 xRecovery installed to boot the custom kernel.
Click to expand...
Click to collapse
Well not all custom ROMS come packaged with custom kernels and OP didn't specify if a custom kernel was flashed. Achotjan v03 ROM comes with stock kernel and unless X10 2.2 USER flashed a different kernel, it'd say it's the baseband. It's probably bb65 too so flash a different bb, try bb67.

xeviro said:
I also experience this with EWJet ROM (which version i forgot, the one release early June). I follow the exact method provided in the post. When you have this symptom, you cannot receive SMS at all. Then I gave up, since i was waiting for important SMS, and reflash with stock again.
APN is only for internet purpose.
Click to expand...
Click to collapse
APN is also responsible for MMS.

Make sure you have 40 mb free or more in the internal memory. It seems you've just flashed but maybe you restored backed up apps or something.
Sent from my X10i using XDA App

The only problem I have with messaging is I can't send long message.
On baseband .52 I only can send 1 message length. 2 or more, it will end up showing "sending" and give an error after a few minutes.
On baseband .67 I only can send 2 message length. 3 or more, it will end up showing "sending" and give an error after a few minutes.
If it only me that have this problem? Anyone can test it and tell me.

agentJBM said:
APN is also responsible for MMS.
Click to expand...
Click to collapse
Well the OP says SMS, never MMS.
Lockon Stratos said:
Well not all custom ROMS come packaged with custom kernels and OP didn't specify if a custom kernel was flashed. Achotjan v03 ROM comes with stock kernel and unless X10 2.2 USER flashed a different kernel, it'd say it's the baseband. It's probably bb65 too so flash a different bb, try bb67.
Click to expand...
Click to collapse
Well i said for custom roms with custom kernel.. it just as a reminder, not the solution of the OP problem.
Anyway no need to continue debate. I just clarifying what i meant.

[Q] Calls and graphics problem

Hello,
it's my first post here, my English is regular so i think you will understand me
I'm using Reincarnation Rom based on CM 7.2 and percy_g2's [email protected]#2 kernel.
There are my problems:
1. I can call people, but nobody can call me. They are hearing normal signal but i don't even see they called.
2. When SIM card is put to the phone, i've got that black curtain after entering PIN(in attachment) or sometimes i see 4 parts of desktop but in bad places.
I hope that anyone knows why these things are happening.
Cheers and thanks in advance

ScarabeusIV said:
Hello,
it's my first post here, my English is regular so i think you will understand me
I'm using Reincarnation Rom based on CM 7.2 and percy_g2's [email protected]#2 kernel.
There are my problems:
1. I can call people, but nobody can call me. They are hearing normal signal but i don't even see they called.
2. When SIM card is put to the phone, i've got that black curtain after entering PIN(in attachment) or sometimes i see 4 parts of desktop but in bad places.
I hope that anyone knows why these things are happening.
Cheers and thanks in advance
Click to expand...
Click to collapse
1. which version r u using ?? make sure it is the updated version !! the older version may have some bugs of calling !!
2. all i can see in attachment is the pattern lock screen !! nothing else !! so please say clearly what is the problem..

ImBJ said:
1. which version r u using ?? make sure it is the updated version !! the older version may have some bugs of calling !!
2. all i can see in attachment is the pattern lock screen !! nothing else !! so please say clearly what is the problem..
Click to expand...
Click to collapse
1. Version of caller app or what? If Rom&Kernel im using newest versions.
2. It's a gif, you need to open it to see.

BUgs
They r hard to b fixed ... so i wud suggest u to change the rom ..... Try Hyperion ....Its stable fast and bug free

Sanjuujosephh said:
They r hard to b fixed ... so i wud suggest u to change the rom ..... Try Hyperion ....Its stable fast and bug free
Click to expand...
Click to collapse
I've had Hyperion, it's a cool ROM with some good features but i like to have polish language.
Anyway, i reinstalled stock firmware, installed percy's kernel and PureKat v2 ROM and everything is working perfectly, thread to close.
EDIT: Tried installing CM7 a few minutes ago and it's also working perfectly, so reinstalling stock rom and then flashing CM7 is the solution.

I Need An Answer For My Problem... :D

I dont get BBM stock notification sound when someone text to me
is anyone facing this issue when using custom rom?
any suggestion?​

Help Can't Receive Calls

Hi Everybody ,
Ever since I flashed Aditya ROM V3 I can't Receive Calls when Using the Flip-case. It Just Gives Number Busy.
But when I remove IT I CAN receive calls.
Tried Lots of different kernels but still the same problem.
Is this a Problem even in the Original Motion ROM TW port
Thanks

Hi,
just a quick question, have u ever try to check for hardware problem?
anyhow, there are severals possible cause that may lead to your issue, try to check Call Divert option, or Call Restrict option. or maybe an IMEI is set correctly.
Good luck
Sent from my R1011 using Tapatalk

RidzVarn said:
Hi,
just a quick question, have u ever try to check for hardware problem?
anyhow, there are severals possible cause that may lead to your issue, try to check Call Divert option, or Call Restrict option. or maybe an IMEI is set correctly.
Good luck
Sent from my R1011 using Tapatalk
Click to expand...
Click to collapse
Thanks, But the problem is still Not fixed
IT is NOT a hardware issue its ROM issue because I dont get it on Stock Nor RR.
So the problem is in the rom. THE Flip-Case is causing the problem.

The problem is in s view

May be u shud give another shot....do a clean wipe and then install the rom

mani_photoworkz said:
May be u shud give another shot....do a clean wipe and then install the rom
Click to expand...
Click to collapse
Already tried it.
But Sadly no Luck. YOU also Have S View Case you said in Motion ROM. Test it Please