Database Users

Making a "getting back to stock FW" howto

Could someone make a "howto get back to stock FW" for the tab? Lots of howto's here, but no one that reverses the process. If someone also could decrypt the file here: http://forum.xda-developers.com/showthread.php?t=889165 and upload it, it would be great. The decodertest.exe does not work.
Thanks a lot!

Why not you?

rangercaptain said:
Why not you?
Click to expand...
Click to collapse
Whowww, what a productive answer......

mondy1 said:
Could someone make a "howto get back to stock FW" for the tab?
Click to expand...
Click to collapse
Hello,
before I start
Flashing a device always comes with a certain risk - if you do not pay attention, you may end up with a device you cannot use anymore. For this reason,
* READ INSTRUCTIONS CAREFULLY ! *
If there are any videos, you can feel lucky + should watch them,
and follow the instructions step-by-step.
If questions do come up, I recommend to ask them BEFORE you flash being unsure if the settings are really ok. You can send me a PN or post in here
* * *
To go back to aka flash Stock Firmware for Galaxy Tab,
1) back up your files
2) go here: http://www.samfirmware.com/WEBPROTECT-p1000.htm
(if you have not yet registered for samfirmware, do it! Believe me, you will sure not regret it)
3) make sure to read the instructions
4) Download and read the PDF instruction guide in the link (especially the pages explaining how to pick the files for ODIN)
5) Watch the Video
6) Download: ODIN v1.7 & the appropriate Firmware for your device
- ! .. everything below here is also well described in the PDF guide .. ! -
7) Open ODIN, pick the files
(!) if you need to repair, make sure to also pick the .PIT file and tick re-partition (personally, I always flash with the .PIT file + re-partition when I flash a new firmware; only when I upgrade I do not flash the .PIT)
8) Switch the Tab to USB Debugging (Settings - Applications - Development - tick: USB debugging / go to: Yes in the pop up window)
9) Power Off the Tab
9a) I always take out the SIM Card and the External SD Card at this step
10) Start Download Mode (hold: Volume Down + then: Power, once screen starts release only the Power button; until you see the yellow droid with the shovel)
11) Connect Tab with the PC
12) now PC installs drivers & in ODIN: on the left hand corner there should be [COM:...] in yellow (this means: ODIN has recognized your device)
13) check once more if the appropriate files have been chosen in ODIN
14) once you are ready, click: START
15) ODIN will now flash - check the Message field on the left hand bottom
(!) don't run anything now, leave the PC and the Tab, and let ODIN do its work, it will take a few minutes
16) once ODIN is done it will say: "PASS" in green on the top left hand corner & the Tab will reboot
- the reboot will take longer than usual, let it fully reboot!
In my case, after flashing Firmware my Tab was in Russian language - I had to go to Settings and set my language to English (if you need help let us know)
Let me assure you that I have flashed two times using Firmware from SamFirmware.com and both times, everything went really well!

Thanks man! You're the best!

you are very welcome /
only a few days ago, I was sitting with my tab in my hands, the tab was stuck in boot loop, I was totally frightened of having ruined it .. asking myself exactly the same question: "How can I flash a stock firmware?"
.. Users sharing experience and helping each other out this is what this forum is here for

I followed your description and it seems everything went well! I still have a question, though; When I connect the tab with Kies, it says under "firmware information": This version of the unit can not be updated" (it's in norwegian, I have translated it so it might not be word-by-word the same as in the english version). The question is: how come?
When I now enter *#1234* the tab states:
PDA: P1000XWJMF
PHONE: P1000XXJMA
CSC: P1000SERJM4
Thanks!

pakalrtb said:
Whowww, what a productive answer......
Click to expand...
Click to collapse
I was inviting someone to research and study, then share their new knowledge. That is what pushes android development forward. My suggestion could have benefited many! At least I wasn't bashing anyone!

http://www.youtube.com/watch?v=kzi_U-fH5Us

That is amazing! Can I suggest adding a few key words in the description? No, nevermind, the title is perfect. Good work!

I was going to follow this guide to see if I can get my VZW USA Tab back to stock because it constantly force closes everything.. I just can't figure out if my firmware is on that website. It says if your from America you shouldn't flash any of those firmwares.. Is there any firmware that I can use for my Verizon Tab?

rangercaptain said:
That is amazing! Can I suggest adding a few key words in the description?
Click to expand...
Click to collapse
Absolutely please, go ahead!

Hmm, I was considering flashing my Verizon Tab as well with a custom ROM, but from what I am reading it still seems to be an iffy process.
If I were to go ahead and attempt it can anybody tell me if any of the ROMs out right now offer signifigant improvements over the stock? And since it is a Verizon Tab would the procedure for flashing a ROM as well as flashing back to stock be the same as the other carriers? Many kudos to the person who gave the detailed response about flashing back to stock, but I just wasnt sure if it applied to Verizon's version as well, as it's the Tab I've found the least info about.
Edit: Just for clarity, making the Tab into a phone isnt something I'm too concerned about...just wanted to slip that in as it seems to complicate the process of flashing these things much more.
Sent from my SCH-I800 using XDA App

QueenAmy:
I follow your instructions exactly, adding PIT file and my fw which is P1000JPJM4
I get Pass in Odin 1.7
when the tab reboots, it takes me to recovery menu 3e automatically and get this on the screen:
-------------------------
update media, please wait
E:Can't mount /dev/block/st110
(invalid Argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions.
copy default media content failed.
--------------------
what Should I do?
I flashed using odin 1.7 like 4 times, with each time I get PASS, but after the reboot , I get the above text.
Should I select (WIPE DATA/FACTORY RESET) ?
and
Wipe cache partition?
please help me, I really appreciate the few minutes you take to reply me.
thx in advance
EDIT:
I tried wipe data/factory reset, then reboot
Now I m stuck in a boot loop with the word SAMSUNG and vibrations, nothing happens

Willy318is said:
QueenAmy:
I follow your instructions exactly, adding PIT file and my fw which is P1000JPJM4
I get Pass in Odin 1.7
when the tab reboots, it takes me to recovery menu 3e automatically and get this on the screen:
-------------------------
update media, please wait
E:Can't mount /dev/block/st110
(invalid Argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions.
copy default media content failed.
--------------------
what Should I do?
I flashed using odin 1.7 like 4 times, with each time I get PASS, but after the reboot , I get the above text.
Should I select (WIPE DATA/FACTORY RESET) ?
and
Wipe cache partition?
please help me, I really appreciate the few minutes you take to reply me.
thx in advance
EDIT:
I tried wipe data/factory reset, then reboot
Now I m stuck in a boot loop with the word SAMSUNG and vibrations, nothing happens
Click to expand...
Click to collapse
See my reply in this thread
http://forum.xda-developers.com/showthread.php?t=920844

Thank you, indeed that fixed the problem, I'm now on the JM4 FW.
Was Lost w/o you, thanks much for your help, truly appreciate it.
Will

[HowTo W/Pack] Flash Stock I9000 2.3.3 NEE Updated (again) 4/25/11

(So because all i have is Microsoft paint and i couldnt get a banner made otherwise, i present to you....my banner....as if it were done by me in the 3rd grade . And yes I left out the "t" just for to be a smart ass ^_^)
{EDIT:Oh look at me.. an edit at the top of the page! I just thought I would mention that while i did include a fully working install guide in the downloadable package I put together, this page will always have the most up to date guide and info on installation and how NOT to brick your phone. Alright please resume your regularly scheduled activities }
Hey Guys!,
Since theres SO many people trying to flash the I9000 Release of gingerbread JVB with xcaliburinhand's kernel I decided to write a little tutorial and I have uploaded a pack with EVERYTHING youll need to flash I9000 2.3.3 Gingerbread NEE (WITH Bootloader) and the ReOriented Kernel.
Heres a little info before you get started
2.x download mode button combo Volume up/down and plug in usb cable
2.3.3 download mode button combo is Volume down + power button no usb needed
2.3.3 recovery hold power and volume up until you see the screen turn on, then release power and continue to hold volume up until you see recovery
2.3.3 USB settings are in Settings>Wireless and Network>USB Settings
2.3.3 debug mode settings>applications > development
DISCLAIMER AND WARNING
IT HAS BEEN BROUGHT TO OUR ATTENTION THAT USING THE 3 BUTTON ODIN JF6 FLASH TO STOCK 2.x WILL BRICK YOUR PHONE BEYOND REPAIR FROM NORMAL METHODS INCLUDING DOWNLOAD MODE JIGS!! PLEASE USE THE 1 CLICK ODIN TO RETURN TO STOCK 2.x, AND THEN FROM THERE YOU MAY USE ODIN WITH THE 3 BUTTON FIX!!!!
AND AS ALWAYS! IF YOUR DOG BEGINS TO VOMIT PEA SOUP,YOUR GRANDMOTHER ROBS A BANK, YOU GROW A SECOND HEAD OR YOUR PHONE BRICKS I AM NOT RESPONSIBLE! YOU HAVE BEEN WARNED!
--------------------------------------------------------------------------
####################################################
THIS IS THE ODIN YOU WILL WANT TO USE TO RETURN TO STOCK!!!! USE THIS ONE AND NOT THE 3 BUTTON ODIN. IF YOU NEED THE THREE BUTTON FIX JUST USE THE 1CLICK ODIN FIRST THEN USE THE 3 BUTTON FIX ODIN
####################################################
-----------------------------------------------------------------------------
DOWNLOAD LINK
http://www.mediafire.com/file/uo180597pp3hprp/Flashing%20GingerBread%20I9000%20With%20REorient.rar
UPDATES
xcaliburinhands Kernel updated from 4/25/2011 see change log
vG.1.1
-Voodoo color fix
-Voodoo sound v8
-Compilation optimizations
-Call audio through dock
http://etc.muteheadlight.net/android/I9000_reoriented_vG.1.1_novoo.tar
MIRRORS
http://arnav.laxsav.com/MISC/Flashing%20Ginger Bread%20I9000%20With%20REorient.rar
Thanks to xtremekilla09 Of TeamPhoenix for the mirrors :]
List of included Files.
GT_I9000_XWJVB_XXJVK_NEEJV3_Sbl.exe
s1_odin_20100512.pit
CWM Flashable Zip to Enable CRT animation "Enable CRT Lock.Zip"
modem_ugjk4.zip (JK4 Modem)
update-xvjvb-home_button_fix.zip (Xcals fix for the non working homebutton)
zImage-root.tar (FuguRoot Odin tar File for Rooting after Install)
I9000_reoriented_vG.beta2.tar (xcals Beta 2 kernel)
ODIN3 v1.7 (if you dont know what this is PLEASE dont even try to flash this yet )
Tutorial Txt file for how to flash ginerbread
Tutorial Txt file for how to root Post install of 2.3.3
I will post the tutorials here also incase you already have everything you need and just need some help!
----------------------------------------------------------------
How to Flash Stock 2.2.3 I9000 NEE GingerBread WITH BOOTLOADER
1. Wipe data and cache/Factory Reset with CWM. (pull battery when complete to shut off phone)
2. Find the "GT_I9000_XWJVB_XXJVK_NEEJV3_Sbl.exe" file and click it and extract its contents into its current folder.
3. Open up Odin 1.7 and now select the 512 pit file I included, and select all the files in the necessary place in Odin and make sure "repartition" is selected". your odin should look like this http://d.pr/Ixt2
4. Put Your phone in download mode and connect, now hit start. (THIS IS WHERE THE ONLY DANGER IS, YOU ARE NOW FLASHING 2.3.3 AND THE NEW BOOTLOADER INCLUDED WITH 2.3.3 Just dont unplug your cable or have your computer die, otherwise you will be 100% Clear)
5. Boot up normally and let things settle.
6. now power off the phone and wait for it to shut off completely. at this point hold down "Volume down and Power" at the same time and wait till download digger appears. Open up Odin and select the 512 pit and xcals kernel(In the PDA box) I included and DE-select repartition if it auto selects and go ahead and connect your phone (Obviously needs to be in download mode) and flash.
7. The phone will reboot and once again let things settle (media scanning and whatnot). Plug in the USB cable and transfer the folders included in this pack named "Fixes and modems" and also "For Rooting" to your phone. then power off the phone once again. this time hold down "Volume Up and Power" as soon as you see the screen turn on let go of the power button and continue to hold volume up until you see CWM.
8. at this point you should be in CWM (Woot!). navigate to flash zip from SD and then navigate to the folder "Fixes and Modems" and flash "Enable CRT Lock.zip" and "update-xvjvb-home_button_fix.zip" and I recommend flashing "modem_ugjk4.zip" as JK4 seems to do the best.
9.Reboot. At this point reboot and you should be on stock 2.3.3! Congrats!!
10. If you want to root read the txt file i included for rooting!
----------------------------------------------------------------------
Step Two! ROOTING!
1. I have included the file "zImage-root.tar" in the folder "For Rooting" which i already had you copy to your phone in the original instructions for installing 2.3.3 included in this pack!
2. Go ahead and power off your phone as you will need to go into download mode for this.
3. Open Odin again and once again select the "512 pit" file included and in the "PDA box" select the "zImage-root.tar". Make sure that repartition IS NOT selected.
4. Go ahead and put your phone in download mode and connect it up and hit "Start" !
5. (Dont Panic!) After it completes it will take you to the charging screen and will not boot up, ITS NOT SUPPOSED TOO, it just installs Busy box, SU, and Root.
6. at this point unplug your phone and close odin
7. now ONCE more go ahead and REOPEN Odin again.
8. Select the File "512 pit" and the kernel "I9000_reoriented_vG.beta2" (PDA) in the folder "Kernel Beta 2" (once again making sure repartition isnt selected)
9. Put your phone in download mode and reconnect and GO GO GO! Hit Start
10. Let it boot normally and Voila you are officially rooted.
___________________________________________________________________
If you need anymore help feel free to catch me on IRC at irc.shadowcard.net port 6667 channel #firefly

Awesome, let the GB frenzy begin.

Update
Version 1.1 of the pack and tutorial - Fixed a wording issue that caused confusion.

thanks sir

Downloading now, weill report back about it all later.. Thanks a million for this !!

Followed instructions to the T. Just flashed CWM stuff and rebooted. Gonna toy with it a bit and report...

THIS IS BAD ASS MY FRIEND!!! Installed SpareParts apk and set windows to fast. This HAULS! You can even change lockscreen wallpapers under display options. DID I MENTION ITS BAD ASS?!?!
Sent from my GT-I9000 using XDA App

Absolutely love it, will test battery and stability and what not over the coming days but I think I'm in love again LOL
Thanks a million HaiKaiDo, wonderful work

Facebook check in actually finds me! (Unlike modded roms)
Sent from my GT-I9000 using XDA App

Thank you kindly!

Awesome! glad everything works good and the tutorial is an easy read . Im currently re uploading the pack with the changed wording for the tutorial.
Edit: Pack updated. Anyone feel free to let me know if they come across any problems.

Thanks for the info, followed the information as instructed and *POOF* there was gingerbread.

Holy ****, downloading now.
Herp derp Captivate XDA app.

pizz0wn3d said:
Holy ****, downloading now.
Herp derp Captivate XDA app.
Click to expand...
Click to collapse
woot, lemme know what you think of the guide :]

very nice guide. already running continuum 5, but nice guide

Great guide, but obviously the stock experience wouldn't live up to those of a custom ROM. What steps should we take to flash i9000 GB ROMs?

I just thought I"d post one "problem" from when I got up and turned on my phone.. for whatever reason (I have an idea) I keep getting FC of the Notification bar and email.apk ... I have a feeling it has to do with my tibu restore...I'm going to reflash some stuff and see if it fixes it.. I tried a few clear cache and dalvik cache but that didn't help, I want to do a master reset but a bit scurred. I'll wait a bit and see if anyone has any ideas before I jump ahead. I can use my phone with no Not bar for a bit LOL
Thanks in advance

spinz said:
I just thought I"d post one "problem" from when I got up and turned on my phone.. for whatever reason (I have an idea) I keep getting FC of the Notification bar and email.apk ... I have a feeling it has to do with my tibu restore...I'm going to reflash some stuff and see if it fixes it.. I tried a few clear cache and dalvik cache but that didn't help, I want to do a master reset but a bit scurred. I'll wait a bit and see if anyone has any ideas before I jump ahead. I can use my phone with no Not bar for a bit LOL
Thanks in advance
Click to expand...
Click to collapse
I had no issues when I restored but I only restored apps no data of any kind.

Ya...i dont know i only restored apps...not doing data i know better lol anway i did a factory reset via cwm and im back in action...ill restore slowly from tibu
Sent from my JVB Captivate using XDA App

I let mine sit off all night, still no FC's since installing. Only issue is the rotation. Had to turn off in settings since whenever I go to settings it's in landscape mode. Mildy annoying when I want the web in landscape but if that's the only issue I have... I can suck it up lol

[GUIDE] Rooting Galaxy Tab 10.1 - ICS

Hello everybody.
I had some hard time rooting my tablet because of the broken links and outdated guides that didn't work if you had updated to stock ICS. After some hours of tinkering I managed to find the correct files for rooting it so here's and up to date guide for rooting the Galaxy Tab 10.1 with the latest ICS OTA update.
For the record my tablet is GT-P7500 with 3G. This guide should also work for GT-P7510 which is WiFi-only. Please leave a reply if it worked for your other model so I can include it here! Please also tell me if there are mistakes in the guide or you have a problem at some point.
If you follow these steps you will void your warranty.​
The package can be downloaded from the signature, or in a single file here:
MIRROR - 1 (Down at the moment)
MIRROR - 2 (Mediafire)​​​
The package ROOT-GT-P7500.rar includes:
A recent version of Odin (v3.07 - 2013)
Samsung USB drivers for Windows
Odin flashable TWRP recovery
TWRP flashable SuperSu
1 - Preparation
Extract the files to a place on your computer.
Make sure Kies isn't running on your PC. Look for its icon in the notification area.
Install "Samsung_USB_Driver_1.5.5.0.exe".
Move the file "Flashable_SuperUser.zip" to the root of your sdcard.
Open "Odin3 v3.07.exe" on your PC.
Press the "PDA" button and select "recovery-TWRP-P4-P7500.tar".
Leave Odin open on the PC.
2 - Download mode
Turn off your tablet.
Connect the USB cable.
Hold POWER + VOLUME DOWN until you see some Android images.
Press VOLUME UP, wait a moment until you get to another screen an press it again.
You should now be in "Download mode".
Open Odin and make sure that the first ID:COM column has a bluish colours and some text like "0:[COM4]". The ID:COM turns blue whever Odin has detected connection between your PC and the tablet. If it's still white/grey something is wrong with the USB connection or the Samsung USB-driver.
3 - The flashing
Now everything should be ready for Odin to flash you a new recovery. Don't change any of the default settings other than what's mentioned here.
Press "Start" in Odin to begin the flash, it should only take a few seconds. If your tabletreboots everything went fine!
If you have problems with Odin detecting your tablet, try rebooting your computer and your tablet, and using a different USB port. It's probably a driver problem.
Now turn off your tablet to enter the new TWRP recovery.
Hold POWER + VOLUME DOWN until you see some Android images.
Press VOLUME DOWN once and then VOLUME UP once to enter recovery.
Use TWRP to backup your current ROM in case something goes wrong or you want to return to stock ROM some time. Google "TWRP guide" if you don't know how to use it.
Once the backup is done, press "Install" in the TWRP main menu.
Locate the "Flashable_SuperUser.zip" and flash it.
If it flashed without errors, reboot your tablet and see if you now have SuperSu within your apps.
You should now have root access!
4 - Custom ROMs
If you want to install custom ROMs, find a flashable ZIP of your favourite ROM and put it on your SDCARD.
You might want to use a program like TitaniumBackup to back up all your apps so you can restore them later on your new ROM.
Follow the above steps from step 4 to enter recovery.
Backup your ROM again.
Press "Wipe" and then wipe cache, dalvik-cache, system and do the factory-reset.
Press "Install" and locate your ROM's ZIP-file.
Flash it and reboot!
That's about it. For long-time reliability I've included the file package in the signature in a split rar file (XDA doesn't allow big files). Download them all and then extract only one of them like any other rar file. If none of the mirrors aren't working and you have a problem downloading it from the sig, feel free to send me a PM.
If this helped you, please press thanks! :angel:

Thanks! But doesn't unlock root work?
Sent from my GT-I9000 with cm10.1

huskyT said:
Thanks! But doesn't unlock root work?
Sent from my GT-I9000 with cm10.1
Click to expand...
Click to collapse
I have never user UnlockRoot. This is the manual way of doing it. If UnlockRoot works then it's probably easier for beginners to use that method

What is this unlockroot you speak of
Sent from my GT-P7510 using xda app-developers app

Stark_raving_mad said:
What is this unlockroot you speak of
Sent from my GT-P7510 using xda app-developers app
Click to expand...
Click to collapse
It's an automated tool that supposedly roots your device in a couple of steps. I don't know if it works but I know that a couple of users have successfully rooted their tablets usimg this guide.
Sent from my Nexus 4 using Tapatalk 4

THANK YOU
Jiia said:
It's an automated tool that supposedly roots your device in a couple of steps. I don't know if it works but I know that a couple of users have successfully rooted their tablets usimg this guide.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
it worked for me p4wifi-7510

Following this guide, I finally root my GT after so long. Thx, OP!

cyanogenmod
the cyanogenmod failed to install on my samsung tablet p7510, but I didn't backup the original rom and there is no system to reboot it now !! is there another way to transfer another mod to install it ??

windsguy said:
the cyanogenmod failed to install on my samsung tablet p7510, but I didn't backup the original rom and there is no system to reboot it now !! is there another way to transfer another mod to install it ??
Click to expand...
Click to collapse
Did you at least manage to install CWM or TWRP recovery? There should be a button called "Mount USB-storage". Press it and connect the tablet to your PC, it should show up as a storage device. If that doesn't work you can always use ADB PUSH on Windows to move files to your phone that is in recovery mode. There are several guides for that.
EDIT: Nvm, didn't notice you had fixed it already.

Hey man thanks for this guide. I've been flashing my sgs1900 here & there for a few years but just acquired a SG 10.1 tab so obviously I had to root it for flashing some custom roms later on. Anyway I can see things are more or less the same, but still just a little bit different enough to want to have a good guide at hand before I get all smug at myself later on for thinking I'm a rom king
Excellent guide & thank you for all the required files. KUDOS!

Sdcard
Sorry, I'm new to this. I understand everything except the part that says "Move the file "Flashable_SuperUser.zip" to the root of your sdcard." how do I do this? When I hook up the tablet to my pc, I do not see a sdcard folder.
Regards

Mestar_matt said:
Sorry, I'm new to this. I understand everything except the part that says "Move the file "Flashable_SuperUser.zip" to the root of your sdcard." how do I do this? When I hook up the tablet to my pc, I do not see a sdcard folder.
Regards
Click to expand...
Click to collapse
My apologies, that part really is a bit confusing. "The root of your sdcard" means that you don't put it in any folder. It's the upmost folder level that the user can access without root rights.
Sent from my Nexus 5 using Tapatalk

Will there be any issues running this from 64bit Win7?

I flashed the TWRP file using attached odin and recovery file.
No issues during flash, but when I goto TWRP the screen flickers.
Just like the refresh rate is not ok.
Someone ideas?
It is the P7500 Galaxy Tab 10.1

spannow said:
I flashed the TWRP file using attached odin and recovery file.
No issues during flash, but when I goto TWRP the screen flickers.
Just like the refresh rate is not ok.
Someone ideas?
It is the P7500 Galaxy Tab 10.1
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41
it's a known issue.
Flashed bootloader only using odin, And not TWRP but the old good ClockWorksMod CWM

spannow said:
I flashed the TWRP file using attached odin and recovery file.
No issues during flash, but when I goto TWRP the screen flickers.
Just like the refresh rate is not ok.
Someone ideas?
It is the P7500 Galaxy Tab 10.1
Click to expand...
Click to collapse
Use the TWRP2.6.30 from this thread.

iZLeeP said:
Use the TWRP2.6.30 from this thread.
Click to expand...
Click to collapse
Thanks :good:
Currently I succeeded by using the http://forum.xda-developers.com/showthread.php?t=2098429
and using the rom [ROM] [JB 4.3.1] CM10.2/SGT7 for P4WIFI and P4 [20140223] accordingly. It was a frightning night but we servived (me and my tablet).
Thanks again.

well.. I broke it
i've followed this instruction and forget to sweep content before rom instalation and my rom is broken.
I've been searching a way to transfer another rom data to my tab memory but somehow my laptop couldn't detect TWRP v4.2.2 version.
I'm still searching for another TWRP version that can be file pushing on to TWRP directly from my laptop.
is there any suggestion?
thank you

nantabr said:
i've followed this instruction and forget to sweep content before rom instalation and my rom is broken.
I've been searching a way to transfer another rom data to my tab memory but somehow my laptop couldn't detect TWRP v4.2.2 version.
I'm still searching for another TWRP version that can be file pushing on to TWRP directly from my laptop.
is there any suggestion?
thank you[/QUOTE
Use TWRP 2.6.3.0 explained in two post lower, then read http://forum.xda-developers.com/showthread.php?t=2304122
howto use adb to push a new rom to the tablet (zipfile to flash). Be patience, takes a long time.
Click to expand...
Click to collapse

FYI, I just used Towelroot to root my Galaxy Tab 10.1 with ICS. Easy 1-click solution.

[GUIDE] Not quite newbie guide for moving to 5.1.1

In one of the development threads a request was made for a step-by-step for transitioning to a 5.1.1 ROM from an earlier version and an example was given from another device. Well I modified the example to make it apply to the Sprint Note 4.
All files needed are linked at the end of this post. This is my first attempt at a guide, so any suggestions for improvement will be gladly accepted.
Prerequisites:
1 - Latest Samsung-USB-Drivers (1.5.55.0) installed
2 - Odin v3.10.6 installed
3 - Two files either on an extsdcard in the phone or on your PC for sideloading through adb:
UBERWIPE.zip (Only for use if you have an extsdcard), BETA-SuperSU-v2.49.zip
**** - If you do not have an extsdcard you will need adb installed on your PC in order to get the SuperSU
file onto your phone for flashing.
Loading Stock OG5:
1 – Run Odin v3.10.6 as administrator
2 – Load the appropriate tar in the AP slot
--If you are on OB7 Bootloader and wish to keep it load Hybrid_OB7sbl_SPT_N910PVPU4COG5.tar
--For complete OG5 upgrade load N910PVPU4COG5_N910PSPT4COG5_N910PVPU4COG5.tar.md5
3 – Click on the ‘Options’ tab avove the Log window
4 – Uncheck the reboot option in Odin.
5 - Click on the ‘Log’ tab above the Log window
6 – Phone off. Enter download mode by holding down Vol Down, Home and Power to first screen presence
7 – Enter download mode by moving cursor – Vol Up.
8 – Plug phone into PC. Drivers are already installed so look for Connection in Odin.
9 – Start Odin on good battery charge. Don’t touch phone until complete, 5-10min.
10 – Close Odin, disconnect cable from phone, turn phone off and remove battery.
Removing the battery is the only way to turn it off at this point. Not exactly true but that's all you need to know. It's the best way.
Rooting via TWRP touch recovery:
1 – Put battery back in and enter download mode as above.
2 – Run Odin as administrator and load twrp-2.8.7.0-trltespr.img.tar in the AP slot
3 – Click on the ‘Options’ tab avove the Log window
4 – Uncheck the reboot option in Odin.
5 - Click on the ‘Log’ tab above the Log window
6 – Plug in phone to PC and watch for Odin to establish connection
7 – Start Odin. It will be quick.
8 – When done close Odin. Unplug phone, Power Down and remove battery.
9 – Replace battery and enter Recovery Mode by holding Vol Up, Home and Power to first screen presence
10 – Let TWRP load
11 – If you don’t have an extsdcard then navigate to Advanced > ADB Sideload and use adb to transfer BETA-SuperSU-v2.49.zip from your PC to your phone
12 – Navigate back to the main screen the to Install and choose the location of the SuperSU file
13 – After flashing BETA-SuperSU-v2.49.zip choose Wipe Dalvik/Cache option.
14 - When wipe is completed you have two choices:
--Choose reboot in which case you will have a rooted stock system
--Wipe the current system and install a custom ROM (see below)
If you choose to flash a custom ROM:
1 - Wipe the current system
--If you have and extsdcard with UBERWIPE.zip on it all you need to do is install that zip and when the
recovery automatically reboots your phone will be clean and ready for a new ROM
--If you don’t have an extsdcard I recommend the following:
A - Navigate to the Wipe submenu
B - Perfom a factory reset 3 times
C - Choose format data, type yes on the following screen then enter. Do this 3 times
D - Navigate back to the Wipe submenu and choose Advanced. Then choose everything except extsdcard
and execute. Do this 3 times.
(At this point if you don’t have an extsdcard you will need to navigate Advanced > ADB Sideload and tansfer the ROM of your choice from your PC to your phone)
2 - Navigate to Install and choose the location of your ROM file
3 - When the flash has completed choose the Wipe Dalvik/Cache button
(At this point I always flash the Beta-SuperSU file and wipe Dalvik/cache again, but I’m just OCD)
4 - Reboot the phone and LET IT SIT AT LEAST 15 MINUTES before you touch it to set anything up!!!
Here is a list of the files and executables you'll be working with: (Links either lead to thread of the file on XDA or direct download from my person Google Drive account)
Samsung-Usb-Driver-v1.5.55.0.exe
Odin3_v3.10.6.zip (3.10.7 is avaiable now as well)
Either:
HYBRID_OB7sbl_SPT_N910PVPU4COG5.tar
- or -
N910PVPU4COG5_N910PSPT4COG5_N910PVPU4COG5.tar.md5
twrp-2.8.7.0-trltespr.img.tar (unless a newer version has been released)
Sprint_Hybrid-X_3.0_N910PVPU4COG5_Deodexed,zip Or any other custom 5.1.1 ROM
BETA-SuperSU-v2.49.zip
Optional -
UBERWIPE.zip by:millerboy3
MD5_and_SHA_Checksum_Utility.exe (I personally never use it unless I run into serious problems after multiple downloads)

thank you so much worked like a charm

Good job wolf. Even though the rom OP's have the needed info some people get a little overwhelmed by the amount of info so it will be helpful to many to have a step by step. Good job.

Thanks for this thread. However, it did not work for me. Only way I could get to OG5 was by Odin to N910PVPU3BOF5_N910PSPT3BOF5_N910PVPU3BOF5_HOME.tar and taking the OTA to OG5. I was just running stock rooted with the newest TWRP . Followed everything to a T. Maybe today just isn't my day.
MACKIE

Which file did you use to try and Odin to OG5? The Hybrid with OB7 bootloader or the pure stock OG5?
Sent from my SM-N910P using XDA Premium HD app

DreamingWolf said:
Which file did you use to try and Odin to OG5? The Hybrid with OB7 bootloader or the pure stock OG5?
Sent from my SM-N910P using XDA Premium HD app
Click to expand...
Click to collapse
Tried both.
Sent from my SM-N910P using Tapatalk

00_MACKIE_00 said:
Tried both.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Mackie, exactly which rom do you want to flash?
Post a screenshot of the last 7 entries in "about device" in settings.

@00_MACKIE_00
Don't mean this to be an inquisition but what failures did you get with Odin or boot or function when following this tut?
Both tars not getting you there is an answer but details, please. TIA. Glad you managed on your own. Not doubting you but curious enough to ask.
Sent from my SM-N910P using Tapatalk

samep said:
@00_MACKIE_00
Don't mean this to be an inquisition but what failures did you get with Odin or boot or function when following this tut?
Both tars not getting you there is an answer but details, please. TIA. Glad you managed on your own. Not doubting you but curious enough to ask.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
I'm curious as well.

Thanks people who have either replied in this thread or messaged me.
The erorrs I was having was with Odin. It would not write at all for either Hybrid_OB7sbl_SPT_N910PVPU4COG5.tar or N910PVPU4COG5_N910PSPT4COG5_N910PVPU4COG5.tar.md5. In fact, Odin would get an error within about 5 seconds of pushing start. Again, the only way to get around it was to Odin back to OF5 and taking the OTA OG5. Once I was on OG5, I was able to flash TWRP in Odin and also install the ROM of my choice with no issues.
For what its worth, tried 3 different revisions of Odin. I used 3.10.6 for TWRP . Seems funny to me I could Odin OF5 but not OG5 . This device is a replacement I got from Assurion about a week after the Note 4's were no longer being sold. It came with OF5 .
Have a good day all!
MACKIE

00_MACKIE_00 said:
Thanks people who have either replied in this thread or messaged me.
The erorrs I was having was with Odin. It would not write at all for either Hybrid_OB7sbl_SPT_N910PVPU4COG5.tar or N910PVPU4COG5_N910PSPT4COG5_N910PVPU4COG5.tar.md5. In fact, Odin would get an error within about 5 seconds of pushing start. Again, the only way to get around it was to Odin back to OF5 and taking the OTA OG5. Once I was on OG5, I was able to flash TWRP in Odin and also install the ROM of my choice with no issues.
For what its worth, tried 3 different revisions of Odin. I used 3.10.6 for TWRP . Seems funny to me I could Odin OF5 but not OG5 . This device is a replacement I got from Assurion about a week after the Note 4's were no longer being sold. It came with OF5 .
Have a good day all!
MACKIE
Click to expand...
Click to collapse
Well u should have done your reading about your bootloader. You're stuck on og5 only roms now. Bottom line, I treat my note 4 like it's irreplaceable............ Because it is.
**** the note 5, and **** replacements

ryanalan82 said:
Well u should have done your reading about your bootloader. You're stuck on og5 only roms now. Bottom line, I treat my note 4 like it's irreplaceable............ Because it is.
**** the note 5, and **** replacements
Click to expand...
Click to collapse
Is there a need to troll my post? I can assure you I have been in this since you were in diapers. Find another thread to post useless information.
MACKIE
Sent from my SM-N910P using Tapatalk

00_MACKIE_00 said:
Is there a need to troll my post? I can assure you I have been in this since you were in diapers. Find another thread to post useless information.
MACKIE
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Mackie, check out this thread :
http://forum.xda-developers.com/showthread.php?t=3185274

Port 6.0.1 to SM-T357W

Just wanted to know if anyone could help me port a marshmallow rom to this Canadian LTE tablet.
I have rooted and managed to install a twrp recovery on it so far but any attempts through Odin or custom recovery have so far failed.
I have managed to flash through Odin a marshmallow stock rom for another version but the touchscreen failed. I think it needed a different driver but I not sure how to implement it.
HELP PLEASE!!!!

sgtdibble said:
Just wanted to know if anyone could help me port a marshmallow rom to this Canadian LTE tablet.
I have rooted and managed to install a twrp recovery on it so far but any attempts through Odin or custom recovery have so far failed.
I have managed to flash through Odin a marshmallow stock rom for another version but the touchscreen failed. I think it needed a different driver but I not sure how to implement it.
HELP PLEASE!!!!
Click to expand...
Click to collapse
Is this the Samsung Galaxy Tab A 8.0 LTE? Give me more specs of it, I'll possibly help you.

ParadoXGodzillA said:
Is this the Samsung Galaxy Tab A 8.0 LTE? Give me more specs of it, I'll possibly help you.
Click to expand...
Click to collapse
Yeah it's the Samsung Galaxy Tab A 8.0 LTE SM-T357W. This tablet has the same spec as the SM-T355 16gb with 2gb ram and 1.2ghz MSM8916 processor.
It's so annoying that samsung have updated the wifi version of the canadian tablet but not the lte version. Typical.

sgtdibble said:
Yeah it's the Samsung Galaxy Tab A 8.0 LTE SM-T357W. This tablet has the same spec as the SM-T355 16gb with 2gb ram and 1.2ghz MSM8916 processor.
It's so annoying that samsung have updated the wifi version of the canadian tablet but not the lte version. Typical.
Click to expand...
Click to collapse
Disclaimer
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research of this topic on your own before you take a look at it. YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you, all, at the same time.
If you want Marshmallow, try this way.
First, go and download Samsung SmartSwitch: http://www.samsung.com/us/smart-switch/assets/downloads/Smart_Switch-PC_setup.exe
If you have Mac, Download here: http://www.samsung.com/us/smart-switch/assets/downloads/SmartSwitch_for_Mac.dmg
Open up the installer and just install it. After open up the application and press Device Initialization > Device Initialization (I know you have to press it again, there's a different tab) then put in your Model Number and the Serial Number. If you don't have the sticker that says the information, try making a new Samsung Account or log in to your old Samsung Account again. An email will be sent to you that says the model number and the serial number. Don't press Search YET!!! I will explain to you after this next paragraph. |
\/
Before you turn off your device, go to Settings > About Device > Build Number (Press 7 times until you see You are a Developer Now!) Go find the Developer Options, right on top of the About Device button. You should see USB Debugging Mode, Select that. Turn off your device and go to Download Mode (Vol. Down + Power + Home Button) It will ask you, Are you sure for installing a Custom OS? Press the Vol. Up button for YES. Plug your USB cord to the PC after you see that it went to Download Mode.
Continuing from where we left off on the PC, press Search now on SmartSwitch. It should start downloading files for that specific device. It will ask you for administrative privileges. GRANT IT! Your device is now downloading files. For me, it takes about 5-20 minutes (depends on what kind of computer you have). When the device files are fully downloaded, SmartSwitch will say Files Download Complete. The Samsung device should reboot and remove the USB cord. You have Stock rom and the warranty is Official!
Good luck reading my instructions!

sgtdibble said:
Just wanted to know if anyone could help me port a marshmallow rom to this Canadian LTE tablet.
I have rooted and managed to install a twrp recovery on it so far but any attempts through Odin or custom recovery have so far failed.
I have managed to flash through Odin a marshmallow stock rom for another version but the touchscreen failed. I think it needed a different driver but I not sure how to implement it.
HELP PLEASE!!!!
Click to expand...
Click to collapse
Was the touch flipped or totally non responsive?
Which part failed to flash with odin?

ashyx said:
Was the touch flipped or totally non responsive?
Which part failed to flash with odin?
Click to expand...
Click to collapse
Thanks for the tip about Samsung Switch but it just gave me stock lollipop again.
As regards the touchscreen it was totally non responsive both in system and recovery. Only parts of the odin files that would flash was the AP file.
The BL, CP and CSC files all failed.

sgtdibble said:
Thanks for the tip about Samsung Switch but it just gave me stock lollipop again.
As regards the touchscreen it was totally non responsive both in system and recovery. Only parts of the odin files that would flash was the AP file.
The BL, CP and CSC files all failed.
Click to expand...
Click to collapse
Wait, let me think of that again. Have you flashed TWRP for this device yet? If you haven't you probably have to use the volume buttons to go up and down.

Yeah it's flashed twrp for lollipop and rooted, both through Odin.

sgtdibble said:
Yeah it's flashed twrp for lollipop and rooted, both through Odin.
Click to expand...
Click to collapse
Which particular partitions are failing?
Aboot?

ashyx said:
Which particular partitions are failing?
Aboot?
Click to expand...
Click to collapse
I really don't know. How would I find that out. Tried flashing a custom rom zip through twrp and flashfire app but to no avail.
I took a recovery log to find out why.
Check attachment file.