Been trying for days & searching for days regarding this problem. The problem is that when I flash the A1 kernel into my tab it shows no signal & wifi won't turn on. So I wanna know anyone out there has a solution to this. Please help:crying:
In the OP of the kernel thread there is a notice for CM users. Did you read it? Did you flash the correct kernel? Did you follow all directions? You answer is probably in the OP of the kernel thread.
Related
Hi,
I am one of those who has ended up with a Defy with green lens. I am not a dev but I stumbled upon this if someone has not already done so.
I have been playing around with MIUI, CM7, GGL and wanted to try CM9 ICS. I followed an already closed thread by adi4motion on this forum, started with stock Froyo but all the time ended up stuck at Moto logo on reboot. While reading the thread to make sure I have not missed out anything but following that thread did not lead me anywhere either on stock Froyo or GB downloaded via thread link but the only thing that got into my mind was GB was flashed after CM9.
So I flashed the latest CM9 Nightly 120617 zip dated 2012-Jun-17 on GGL ROM Android 2.3.6 from this forum and gapps 4.0.3. It has been successful with camera, opera, gps working well. So far no FC. Seems stable so far 2 days of checking various things. While installing Opera wifi needs to be on else installation fails. I do not know where to upload screen shots taken by holding power button.(that works too).
I seek expert opinions.
Your thread Title: Misleading
Your Question: Unknown
Your Thread location: wrong
Please ask the moderator to move it in Q&A thread and be appropriate on ur question. We will definately help u.
Questions go in the Q&A section
brajesh was right that I was not clear in my question. I was looking for changelog for CM9 for defy. I could not really locate one. All I could find was from the now closed thread that specifies a specific GB kernel or a Froyo CM7 kernel and a buggy HWA with Opera not working etc.
My question was supposed to have been whether any GB kernel is good enough for CM9 ICS flash for defy.
I found that flashing CM9 zip over GGL ROM without any kernel update worked OK for Opera to work fine. A buggy HWA was pointed at for Opera not working. As mentioned in that thread Camera Panorama does not work. I did not even expect the defy to bootup full going by the closed thread.
Sorry I did not click the option if mine was a question. I would appreciate if some one could point a thread where I can learn about HWA testing as I do not have enough net time per week basis. Thanks in advance.
Q&A for [ROM] Dirty Unicorns 4.4.4 {Grouper} [EXT4/F2FS] [v8.2] 11/04/14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Dirty Unicorns 4.4.4 {Grouper} [EXT4/F2FS] [v8.2] 11/04/14. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
noahthedominator said:
Guys, I've tried flashing this on my Nexus 7, several times and every time it fails and gives me an error that says...
symlink some symlinks failed
E: error in /data/media/0/download
status 7
installation aborted.
I've tried using TWRP and CWM with no luck. I have also tried re downloading and I flashed paranoid android successfully.
If anyone could please give me a solution that would be great.
Click to expand...
Click to collapse
noahthedominator said:
Found out its a problem with twrp. I had to remount and them unmount the system partition and then flash.
Click to expand...
Click to collapse
Been having this issue with the last two versions I think, it doesn't seem to matter how many times it's downloaded.
I've tried the remount,unmount solution via TWRP but doesn't seem to be working on my end...
Also did a bit of searching and kinda curious is that problem with TWRP mentioned anywhere else perhaps with a bit more details?
@spaceman860 I cant download link #1, pls fix it. Thanks u.
link problem
The link seems to have a problem with the port, please fix it. Thank you
I think I found a bug, when rotating from portrait to landscape, camera right side, the navigation buttons disappear but not to the left.
hi there, what is the latest DU gapps for lollipop.?
thank you
Anyway to make the camera work on lollipop?
Thanks,much better and smoother than 5.01, thanks for your support.
Installed successfully, but the posted link to the custom Gapps led to it being stuck on the introduction screen with the "checking connection", so I had to find a better version elsewhere. Also: It doesn't charge past 45%, and I turned the power off and let it sit overnight.
Ok this might be a bit newbyish question but please bear with me. I had been running this rom with little to no problems. Dirty Unicorns lollipop 5.1.1 was recently released so I upgraded. I thought I was all set after the first day or so so I stupidly deleted my nand backup of Dirty Unicorns 4.4.4 v8.2. But after a couple of weeks I've decided I really don't care for the lollipop version and I want to get back to this version. So I wiped Dalvik, Cache, System and Data in the latest version TWRP. I then install the 4.4.4 v8.2 zip and everything looks like it installs fine, but when I reboot I get the Google screen, then it goes black, with the backlight on. It never gets beyond that point. I haven't done anything "special" with any settings so I'm not sure what's happening. I am able restore the nand backup of my lollipop install but I cannot seem to install a 4.4.4 at all. Anyone have any idea what I'm doing wrong? Thanks!
Will it work on nexus 2012 with 5.1.1 stock ?
Will it work on nexus 2012 with 5.1.1 stock ?
is anyone having trouble downloading v9.4? i seem to get a bad download each time.
does it work with tilapia ? any chance?
Same here. Maybe there's a way to disable it?
saltenbuchner said:
does it work with tilapia ? any chance?
Click to expand...
Click to collapse
+1
Skickat från min Nexus 7 via Tapatalk
Overclock
Has anybody had success with overclock on the 5.1.1 ROM? I can't seem to set anything above 1300Mhz. It's pretty fast already but I'm a speedfreak.
Awesome work though, love the ROM.
*note* I would post to the actual thread but...
Code:
Because you have less than 10 posts, the developer of this thread has opted to have replies go to a separate questions and answers thread. Placing your question within the Q&A thread will increase its chances of being answered by a member of the community or by the developer. Once you have more than 10 posts, you can post anywhere.
/Pete
can you add more i/o(sio,zen etc)???
thx
Anybody having problems with 9.7? Whenever I boot the launcher goes fc
Sent from my LeedroidRom-powered HTC One M8
Q&A for [kernel] cm12 sm-t330nu
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [kernel] cm12 sm-t330nu. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
hey Moon!
moonbutt74 said:
okay,
this is built through bliss but seems to do
cm12-kernel-carmilla-linaro-milletwifiue-mb74.zip
https://www.androidfilehost.com/?fid=23991606952595027
Flash in recovery after rom flash. Don't screw it up !
NOTE- for lanscape i recommend setting dpi to 160
I will update my source soon. it is located here
https://github.com/moonbutt74/kernel-milletwifi-choad-warrior
I enjoy calling this my caf-maybe kernel xD
Rotation fixed, i am working this kernel source to see if i can get kexec hardboot functionality working
Please do not ask me questions about overclocking.
This is a temporary offering for @sub77 's LP build for the sm-t330nu milletwifiue
[ROM][UNOFFICIAL][LP5.1.1] CyanogenMod 12.1 Galaxy Tab 4 8.0 [20150430][SM-T330]
http://forum.xda-developers.com/tab-4/development/rom-cyanogenmod-12-1-t3097152
This does not resolve the camera issue but does seem to prevent the reboot which occured before.
Please do not ask me questions about overclocking !
thanks :silly:
m
Click to expand...
Click to collapse
AND MY BOY MULTITASKING PROJECTS NOW. LOL. Is sub77 having the same issue as I am? I get stuck at the samsung launch screen right before my boot animation appears. (If I flash ROM then Kernal) simultaneously through twrp recovery. ---- :\ ----- if I just try to flash the CM 12.1 Unofficial, gives me a soft brick. Trying to look at threads on the issue. It states "cannot find update binary in cm12 file" during some Cm12.1 ROM flash attempts
ThaddNation said:
AND MY BOY MULTITASKING PROJECTS NOW. LOL. Is sub77 having the same issue as I am? I get stuck at the samsung launch screen right before my boot animation appears. (If I flash ROM then Kernal) simultaneously through twrp recovery. ---- :\ ----- if I just try to flash the CM 12.1 Unofficial, gives me a soft brick. Trying to look at threads on the issue. It states "cannot find update binary in cm12 file" during some Cm12.1 ROM flash attempts
Click to expand...
Click to collapse
T,
I use philz recovery, twrp is consistently a giant bag of bugs and i won't touch it..
https://www.androidfilehost.com/?w=files&flid=23544
don't multiflash , do rom, then kernel, then supersu.
m
M
i have seen you posted some issues with MTP mode. i have that problem too and i am using a mac book
regards
Kernel v4
Hey Moon,
Does the 4th version enable over clocking the tablet? In kernel editor I have the option to push the CPU upwards of 1593MHz and the GPU to 533MHz. ! BTW, any new projects? I've been following you and sub77 on this Rom\Kernel but seems like it is getting quiet. I've been fooling around in the system files to see if I can find a fix for this camera. I got rid of Two files in /system/etc/permissions. And had to edit two that I found which were corrupt compared the the other camera files I've been comparing them to. I'm slowly but sure on to something. Let me know if u want to port a Sweet ROM, or Tweak a kernel out, etc. I'm ready!
Thadd.
T,
hi, if you succeed in solving the camera issue, please do a complete detailed write-up on the fix.
For all versions of kernel 2-4 i applied amyren's OC/UV changes , and set ondemand/cfq as default.
I run that kernel in my cm11 build [personal, not release] and it does well, camera up. the break is on the rom side somewhere. [cm12]
i am currently working the LL kernel realease for the sm-t530nu. The kernel for the sm-t330nu [mine] is done.
The source is posted here, https://github.com/moonbutt74/kernel-milletwifi-choad-warrior-rv01
you are absolutely welcome to and encouraged to take it foward, being a bit of a dumb-dumb that's as far as i could get it. :silly:
m
Hey guys, I flashed this rom http://forum.xda-developers.com/galaxy-note-3/galaxy-note-3-exynos-android-development/rom-resurrection-remix-t3172889 , I really like it, everything is working fine, but there is a bug. I can't turn off vibration. I read on that thread that other people is having the same bug, others don't.
I thought asking in the very same thread but it is closed. And I can't find any solutions on google. I've read the thread looking for solutions. One is to flash the SU zip from recovery, other, set selinux to permissive. I tried the first one, no luck. The selinux one I have no clue on how doing it.
Is this same bug http://forum.xda-developers.com/showpost.php?p=62209461&postcount=31 I can't control vibration.
So, someone who has flashed this ROM and had the same bug and found a solution could please help me?
By the way my note 3 is a SM N900.
My S4 got a Problem with Battery....it drains faster as i can see.
But I know the answer and i know where i can find at xda.
And now my "real" Problem:
Can't find the Thread with my solution.
Everytime i search for" Official Resurrection Remix-LP" for my S4(i9505), i just get the Marshmellow Version.
I don't want MM...., if hell freeze,i would.
Inside the RR-LP-i9505 Thread i search for an STweak Walkthrough, specialy for RR-LP-i9505.
Is there anybody who can help me?
GT-I9505/RR-LP5.5.9/XPOSED
Problem solved
Sorry for this Non-Sense Thread.
The Problem was the kernel and NOT the Rom. In my case it was alucard kernel.I searched for "Stweaks S4" and there were a Thread called "Alucard STweaks Settings for i9505".
GT-I9505/RR-LP5.5.9/XPOSED