Hi Firends I Flash the defy Plus DFP-231 in my defy red lens .camera working .but i cannot root this defy Plus DFP-231.when i flash the root DFP-231 my phone is reboot randomly with in 5 second .its not boot up i flash many times . I tried this method also DFP-188, DFP-231, DFP-2311 BL7
and defy bl7 root it both cannot work .so please help me guys
(sorry for bad English)
There is a thread in development section for rooting bl7 firmware. Check it out.
hi.
i have same problem.
when I flash DFP231 my phone always show 1% battery and reboot!!
but solve .
flash rooted DFP231.
and put usb cable on ur phone.(dont disconnect Usb Cable after Flash DFP231 SBF )
instal CWM Recovery.
Flash CM7 Skanak.
instal root explorer
go in folder system-->bin-->batt.bin file.
click on mount ( u can set promission on batt file)
chek all empty .
ur battery always show 100%.
and ur phone wont reboot.
maybe ur battery wont work.
use external charger.
good luck.
My battery is charging normal 100% and camera ,video rec working .my defy is red lens.when i flash the DFP 231 its ok ,when i flash the rooted DFP 231 then only moto boot log only blink then reboot with in 4second its the major problem .pls help me friend . .
there is 2 rooted sbf . maybe u flash cee rooted sbf on CN SBF. its different.
thanks its working .finally iam root my moto defy red lens .now iam in cm10
ela1103 said:
thanks its working .finally iam root my moto defy red lens .now iam in cm10
Click to expand...
Click to collapse
How did you get the battery to start changing?
Related
So, my defy had had Cm7 with android 2.3.7 installed. I don`t know what i did but i installed android 2.1 ( update 1 ) on it ( ) i know ... this is bad ).
Right now, i can`t install any android above 2.1.1 even though i read on the forum about simillar situations like mine.
This evening, something happened and my defy won`t boot up... enters into an continous loops and stays right there . Don`t know what to do ... i just want to install CM7 again ...
Any suggestions ? What should i do ...
If i try to flash android 2.2.1 or 2.2.2 the phone stops at the motorola red logo ... i can`t make hard reset ... nor wipe data/cache from the bootmenu ( the phone is restarting )...
I neeeeddd heeelpppp !
Oh ... and if i install this -http://forum.xda-developers.com/showthread.php?t=1093352 - or any other sbf it won`t boot
It works only with JORDN_U3_97.21.51
Keep the one work and start from there, full wipe and flash 2.2.2.
Can you give me a link with that 2.2.2 that you suggest I should install? Please
You can use stock froyo ROMS from: forum.xda-developers.com/wiki/index.php?title=Motorola_Defy
won`t boot up ... only with JORDN_U3_97.21.51 is booting up ). so , i downgraded from 2.3.7 to 2.1 update 1. what to do nowwww ?
I had a similar problem with my Defy. I solved the problem by flashing the Gingerbread ROM 2.3.4/4.5.1-134 as nandroid backup + fixed sbf. After that i flashed the Froyo (o2) sbf back and finally got it booted up.
yep ... i finally solved it. if anyone have the same problem as me -> http://forum.xda-developers.com/showpost.php?p=15341774&postcount=8
This happened to you because JORDN_U3_97.21.51 is 2.1 eclair with CG39.smg and CG31.smg version 5. Once you flash a version 5 CG set you are stuck on version 5. This is the same CG version as the leaked 2.3.4 sbf's. The ONLY sbf's you can flash from now on are JORDN_U3_97.21.51 and the full 2.3.4 sbf's. To switch to any other rom you will need to restore THAT roms nandroid, and then create a fixed sbf from THAT rom by depacking THAT sbf and deleting CG39.smg and replace CG31.smg with CG31.smg from 2.3.4 sbf. Repack it and flash this fixed sbf.
I know its obviously too late but for anyone reading this who wants to downgrade from a froyo sbf to an eclair sbf can flash US Tmobile eclair 2.1 sbf found here http://sbf.droid-developers.org/umt...1028.0R_JORDANTMO_P022_HWp3_Service1FF.sbf.gz This eclair sbf shares CG version=4 just like froyo sbf's. I'm not sure if any other eclair sbf's contain CG=4 as I'm only familiar with US Tmobile eclair sbf. But I believe all other eclair sbf's have CG=3
Hey guys, i flashed several .sbf to my defy through RSD like .sbf of defy+ and uk 2.3.5 but none of them worked for me.
And now my defy is not booting even with the original .sbf that is 2.2
Please help......................
I love my defy..http://media.xda-developers.com/images/icons/icon9.gif
if you have installed new version of FULL sbf which is not downgradable then u r stuck...
check this URL for more to some how revert back ...
http://forum.xda-developers.com/wiki/Motorola_Defy
please be more appropriate please........... tell me how do i get my defy in normal mode....
what should i do?????/
please guys help me..........................
neerajbisht1988 said:
please guys help me..........................
Click to expand...
Click to collapse
If all depends on the kind of SBF that you flashed. If you have flashed a FULL sbf then you can't downgrade most likely. If you flashed a FIXED sbf then downgrading shouldn't be a problem.
I made the same mistake in the beginning but luckily I only flashed a FULL 2.2 sbf which is stable. For now I always start from this rom, get root on my phone using superoneclick, install 2ndinit, reboot into 2ndinit recovery (volume down when led turns blue) and I install the nandroid backup that I placed on My SD card using "install from zip".
It would help if you gave some more info on which sbf you flashed?
RSDLITE(WINXP)->sfb 2.2.2
Sent from my MB525 using XDA App
Links
have similar problem ...
cant paste external links yet so if u wanna try what i did PM me
Hey
I wanted to install a new rom on my defy+ so i booted to clockwork and did it. but it failed and now i cant access Clockworkmod only a silly stock recovery which cant install my rom. I used to just reboot into recovery, but i cant do that now since there is no rom on the phone. Can you guys please help me to get to custom recovery/clockworkmod.
Please help me, i dont know what to do and my phone dosent work now! :-(
You will have to go back to stock. That's the **** with the locked bootloader. Do all steps again to instal it again. Probably on wrong kernel.
Sent from my MB525 using XDA
Well u must have heard about how to get STOCK rom...
well i have flashed more than 10 roms never find any problem yet
now what u shud do is go back to your STOCK Rom the one which motorola gave inbuilt in ur defy +
using RSD software
And your .sbf file
.sbf is rom file
just go to RSD lite then open .sbf file
Put your MOTO into bootloader and flash
Do not remove your Mobile unless progress is done 100%
if u r still confused please read guides provided by experts
where can i find the SBF that fits to my phone? and also so it can be rooted again.
maybe here: http://forum.xda-developers.com/showthread.php?t=966537
hi friends
m new here my motorola defy is not showing any thing even am pressing power buton volume keys , their is loking like dead but via usb i cn see my mobile detect in rsd lite
how can i install stock bootloader? Or rom ? Before i swap rom and i was trying to install stock rom via rsd lite
Flash the same .sbf as of your build and after that root it again and install 2ndinit then you are good to go
on my defy+ im instal mint rom from http://forum.xda-developers.com/showthread.php?t=2259340
and everything was fine but wen i wont to instal kitkat from http://forum.xda-developers.com/showthread.php?t=2515036
phone crush on bootloader ,then i flash it with RSD lite with sbf-file coled Android 2.3.6
Blur_Version.45.0.2310.MB526.NonEFIGSRetail.en.EU
i can root it with framaroot-1.9.1, and istal sndinitdefy 2.3 but wen i want instal rom CM10 i cant and defy turn i to botloader and i must flash it with rsd
where i make mistake
sory for my English