I use this USB host cable and it works great. Have tested it with my 750gb Oyen and 320gb WD Passport external HDD's, several usb flash drives (8-16gb), San disk USB memory card reader, and a USB keyboard.
For those having issues getting their Xoom to recognize USB storage devices here's what I've got and did to get it to work: I flashed my XOOM (3.1) to the 2.6.36.4 Tiamat_Xoom-v1.4.4-Full_Throttle Kernel and was unable to get the USBMount to recognize drives or storage at first. I installed USB Mass Storage Watcher from the market (it's free) and it works awesome! Can mount any storage I want (NTFS, FAT16/32, HFS, HFS+, EXT2, ETX3, EXT4) with any capacity. I think this app will work with any rooted Xoom (or other devices). Under my Kernel my USB host is located under/usbOTG.
Hope this helps.
Thanks for your post, im having trouble getting my Wifi Xoom usb host to work, i have tried making a cable from the tutorials around here and i have also bought an OTG cable but didn't get any luck having it working, im on HC 3.2 Tiamat 2.1.0 Tachi stock GPU , i tried installing busybox - OTG watcher - Drive Mount etc. and followed all kind of guides in the forum and on google with no luck, i tried usb mice , more than 6 flash drives, usb 3g dongles and other devices without any indication of any kind of connection or powering up, so most probably the problem would be from the cable...as i ordered xoom usb otg cables from ebay and until i receive them i was wondering if there might be anything i was missing?
hunix said:
Thanks for your post, im having trouble getting my Wifi Xoom usb host to work, i have tried making a cable from the tutorials around here and i have also bought an OTG cable but didn't get any luck having it working, im on HC 3.2 Tiamat 2.1.0 Tachi stock GPU , i tried installing busybox - OTG watcher - Drive Mount etc. and followed all kind of guides in the forum and on google with no luck, i tried usb mice , more than 6 flash drives, usb 3g dongles and other devices without any indication of any kind of connection or powering up, so most probably the problem would be from the cable...as i ordered xoom usb otg cables from ebay and until i receive them i was wondering if there might be anything i was missing?
Click to expand...
Click to collapse
Sounds like your cable is not OTG. A lot of them are not. Try it again with your Moto cable when it comes. Also, try rebooting with the cable and drive plugged in, with OTG Watcher running. That has worked for me in the past.
Xoom 3G, stock FW 3.2, non rooted and ot cable
So - just installed USB Mass Storage Watcher OTG - https://market.android.com/details?i...tcherotg&hl=pl
Pendrive is recognized by the program immediately and displays the mount point /dev/block/sda - but unfortunately the next value is 0MB. And this is like that on every pendrive. Do I need root to mount it, or do you have any other idea to mount my pendrive without root?
sdsi said:
Xoom 3G, stock FW 3.2, non rooted and ot cable
So - just installed USB Mass Storage Watcher OTG - https://market.android.com/details?i...tcherotg&hl=pl
Pendrive is recognized by the program immediately and displays the mount point /dev/block/sda - but unfortunately the next value is 0MB. And this is like that on every pendrive. Do I need root to mount it, or do you have any other idea to mount my pendrive without root?
Click to expand...
Click to collapse
You do need root to mount the drive-to use Xoom in USB Host Mode.
Only root? Is that all that needs to be done?
spinstartshere said:
Only root? Is that all that needs to be done?
Click to expand...
Click to collapse
You need a kernel or rom that supports OTG. Tiamat Odachi kernel, Moray rom, the 4G rom, and the Rogue Rana kernel should all support usb host mode. You will also need a real otg cable and probably an app that helps you mount the drive, such as USB Mount All or Drive Mount.
okantomi said:
You need a kernel or rom that supports OTG. Tiamat Odachi kernel, Moray rom, the 4G rom, and the Rogue Rana kernel should all support usb host mode. You will also need a real otg cable and probably an app that helps you mount the drive, such as USB Mount All or Drive Mount.
Click to expand...
Click to collapse
it works great on rooted stock kernel 3.2 with "Drive Mount" but from the market you can not install "Drive Mount" it says not supported.
If the program is free could someone post the apk?
Sent from my Xoom using xda premium
3devious said:
If the program is free could someone post the apk?
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
busybox also needed
it is free and here is it
I have xoom wifi usa version with 4.0 version that is recently released.
my xoom is NOT ROOTED.
with new version of andriod os, am i able to read/write to USB drive Or still need rooted?
thanks in advance.
uhs74 said:
I have xoom wifi usa version with 4.0 version that is recently released.
my xoom is NOT ROOTED.
with new version of andriod os, am i able to read/write to USB drive Or still need rooted?
thanks in advance.
Click to expand...
Click to collapse
Just tried with a genuine motorola OTG cable, which works with the same stick because I used it for upgrading my UK one to US ICS 4.0.3, and it doesn't work without rooting. I still can't root mine yet because my micro SD card for backup hasn't come!
hello
i have wifi xoom android 4.0 rooted with timat kernal
the usb host mount fine but i coudln't found the files in the file explorer
when i mount hard drive fat 32
also when i mounted the ntfs hard drive it shows me 0mb in the usb mount app !
what is the problem
read usb drive from rooted xoom
i have rooted my xoom (wifi usa)based on http://forum.xda-developers.com/showthread.php?t=1446469
I installed stickmount app (https://market.android.com/details?id=eu.chainfire.stickmount&hl=en) from market.
i used Micro USB Male to USB A Female Adapter (http://www.amazon.com/Micro-USB-Mal...YMU6/ref=sr_1_2?ie=UTF8&qid=1329151612&sr=8-2)
once connected to xoom the usb drive ,StickMount app recognize and mount it on specific drive (folder) which display on screen for some duration.
then goto "ES file explorer" or "Astro file explorer" and select that folder and you can see the contents of usb drive.
usb drive should be in format Fat32 mode.I have not tried with NTFS or other format.
Hope this helps somebody.
uhs74 said:
i have rooted my xoom (wifi usa)based on http://forum.xda-developers.com/showthread.php?t=1446469
I installed stickmount app (https://market.android.com/details?id=eu.chainfire.stickmount&hl=en) from market.
i used Micro USB Male to USB A Female Adapter (http://www.amazon.com/Micro-USB-Mal...YMU6/ref=sr_1_2?ie=UTF8&qid=1329151612&sr=8-2)
once connected to xoom the usb drive ,StickMount app recognize and mount it on specific drive (folder) which display on screen for some duration.
then goto "ES file explorer" or "Astro file explorer" and select that folder and you can see the contents of usb drive.
usb drive should be in format Fat32 mode.I have not tried with NTFS or other format.
Hope this helps somebody.
Click to expand...
Click to collapse
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
derek4484 said:
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
Click to expand...
Click to collapse
Oh i got it wrong link but i used OTG adapter.
derek4484 said:
You got it to work using that USB adapter? That's not a USB OTG adapter. It really shouldnt work using that one.
Click to expand...
Click to collapse
How's that digger from a USB ORG adapter? Just curious.
Sent from my ADR6350 using Tapatalk
Everything works only if its Fat32. NTFS needs new kernal loaded. I am Rooted but Stock. 4.0.4.
Reboot loop after trying to get external USB to work
My Xoom WiFi running Team EOS build 102 would not see my USB drives. I installed 'USB Mass Storage Watcher' from the market. This app then prompted me to install the OTG version. I followed instruction and removed original version before install the OTG version. The OTG version also prompted me to down load another version of Busy Box, which I did.
I could then see one of my USB (see size and space used), but could not see files or folders in the mount location. I restarted my Xoom (I live in a windows world and reboot fixes a lot of issues LOL), Xoom got stuck in reboot loop. I went into recovery mode and clear my Dalvik, but this had no effect on reboot loop.
Luck for me I had a Nandroid backup from 2 days earlier (pheew). Restored this and back to normal.
Not sure if anyone has had this problem, but I strongly recommended making nandroid backup before doing any device driver updates.
No Prob...
im on the same software version as u, i connected usb drives, mouse and keyboard without any problems, just wanted to let u kno
I have the international version of the LG G2 32gb. Stock rooted with exposed framework, one or two navbar/statusbar modules installed.
I have tried a small 4gb usb drive and the G2 recognises it just fine. I have nothing bigger except for an old (perfectly working) 100gb usb external hard disk drive ntfs format. it doesn't rely on any power. USB cable from PC powers it just fine.
So when I connect this drive via USB OTG, my G2 simply doesn't see it. I've waited more than half hour to see if it is performing a media scan silently but it still doesn't show on any of my file explorers such solid and root explorer and stock one ofcourse.
Does anyone have any ideas?
Is it because it is an external hdd?
Is it because the phone can't power it on its own?
Is it that it can read only smaller cards less than 100gb? I don't have access to anything else to test.
Is USB OTG supported in aosp roms like pac man?
Thanks guys.
subhani said:
I have the international version of the LG G2 32gb. Stock rooted with exposed framework, one or two navbar/statusbar modules installed.
I have tried a small 4gb usb drive and the G2 recognises it just fine. I have nothing bigger except for an old (perfectly working) 100gb usb external hard disk drive ntfs format. it doesn't rely on any power. USB cable from PC powers it just fine.
So when I connect this drive via USB OTG, my G2 simply doesn't see it. I've waited more than half hour to see if it is performing a media scan silently but it still doesn't show on any of my file explorers such solid and root explorer and stock one ofcourse.
Does anyone have any ideas?
Is it because it is an external hdd?
Is it because the phone can't power it on its own?
Is it that it can read only smaller cards less than 100gb? I don't have access to anything else to test.
Is USB OTG supported in aosp roms like pac man?
Thanks guys.
Click to expand...
Click to collapse
NTFS
That's your problem friend... Format it to FAT32 or root and use this
Cheers!
Really? Wow, I'm gonna have to transfer all those files from the hard drive first and then format right? I hope my G2 would recognise it then. I'll post an update soon as I can get my hands on another HDD to back up to before format.
Thanks.
Sent from my G2 using tapatalk
The only thing is, my other small USB drive which did work via USB OTG is also NTFS format. Why would this work and not the larger capacity external HDD?
Sent from my G2 using tapatalk
subhani said:
The only thing is, my other small USB drive which did work via USB OTG is also NTFS format. Why would this work and not the larger capacity external HDD?
Sent from my G2 using tapatalk
Click to expand...
Click to collapse
Are you 100% certain the other one is NTFS?
Android is not NTFS compatible out of the box (unless rooted).
Cheers!
Yes I'm sure. The 4gb USB stick that works over otg cable is actually what I used to create a quick recovery drive of my win8 laptop as soon as I unboxed it. Win8 requires the flash drive to be NTFS for the recovery image to be created. So I did as it asked and formated and it produced the recovery drive on it.
I now connect it to my G2 and it recognises the flash drive and it shows the contents as recovery files for windows.
Sent from my G2 using tapatalk
Tldr both drives are NTFS format.
Sent from my G2 using tapatalk
Using my OTG cable, along with StickMount, I've been able to view files on my USB stick. However, after formatting (exFAT) my USB device, and trying to view files off it once again (using ES file explorer), the folder for the USB Storage now shows up empty. Even when files are present on the USB stick.
I have tried different files on the device, to see if my Nexus 7 will read, but to no avail, it just shows an empty folder.
Anyone got any ideas?
partyfox said:
Using my OTG cable, along with StickMount, I've been able to view files on my USB stick. However, after formatting (exFAT) my USB device, and trying to view files off it once again (using ES file explorer), the folder for the USB Storage now shows up empty. Even when files are present on the USB stick.
I have tried different files on the device, to see if my Nexus 7 will read, but to no avail, it just shows an empty folder.
Anyone got any ideas?
Click to expand...
Click to collapse
so I probably won't be able to help, but just out of curiosity, does StickMount launch when you plug in your usb stick?
jma9454 said:
so I probably won't be able to help, but just out of curiosity, does StickMount launch when you plug in your usb stick?
Click to expand...
Click to collapse
It does, yes
Got it fixed!
When formatting my USB drive through windows I only had exFAT & NTFS file system options. What I did was download "HP USB Disk Storage Format Tool - v2.1.8" - and it gave me the option to use FAT32.
Problem solved, USB device seems to be working now.
How do I mount an external USB stick? I thought it was under /mnt/usbdisk0, but it's apparently not. I can access this folder and create folders in it fine, but it's still there, and I can manipulate files on it even after I unplug the drive. Also, accessing this directory does not power on the USB light. How do I access external USB drives in OmniROM?
StickMount is one mounting tool that seems to work well.
---
Posted from whatever phone booted today
jeffsf said:
StickMount is one mounting tool that seems to work well.
---
Posted from whatever phone booted today
Click to expand...
Click to collapse
I tried StickMount, but it didn't do anything on my device. I have the drive formatted in FAT32, so it should be readable on anything. I tried plugging it into my wife's tablet, and it works fine there. I just can't seem to get it to work on my phone.
Hi
Somehow when i connect a 16GB USB stick to my note 3 via an OTG cable it shows
1. USB connector connected
2. USB mass storage connected
then immediately
3. USB mass storage removed safely
so i cannot see anything from my USB device connected via an OTG cable
for instance my 16GB sandisk USB stick is not mounted anymore
it used to work with 4.3.xxx but not with the latest update of 4.4.xxx
also Air Droid can't write anymore so it's useless
my USB stick is ntfs formatted, would that be an issue?
i have Paragon exFAT, NTFS & HFS+ installed but it says it has no root access, i have the stock rom and not rooted. it used to work with 4.3 but now with 4.4 it does not work any more
thank you
pixel mixer said:
Hi
Somehow when i connect a 16GB USB stick to my note 3 via an OTG cable it shows
1. USB connector connected
2. USB mass storage connected
then immediately
3. USB mass storage removed safely
so i cannot see anything from my USB device connected via an OTG cable
for instance my 16GB sandisk USB stick is not mounted anymore
it used to work with 4.3.xxx but not with the latest update of 4.4.xxx
also Air Droid can't write anymore so it's useless
my USB stick is ntfs formatted, would that be an issue?
i have Paragon exFAT, NTFS & HFS+ installed but it says it has no root access, i have the stock rom and not rooted. it used to work with 4.3 but now with 4.4 it does not work any more
thank you
Click to expand...
Click to collapse
NTFS will not work on android. Format your usb to exFat or fat32, or read this
http://blogs.bu.edu/mhirsch/2013/12...r-sharing-usb-flash-thumb-drives-and-usb-hdd/
actually i cannot format my flash, it's full and i don't want to loose the data
thanks anyway
Erhm copy files to PC,format stick and copy back The files?
Respect!
thanks, that would work if i'd had a computer with me. i'm away from home and was hoping i can mount my usb stick. is there a solution that does not require root access?
pixel mixer said:
thanks, that would work if i'd had a computer with me. i'm away from home and was hoping i can mount my usb stick. is there a solution that does not require root access?
Click to expand...
Click to collapse
Not that i know of.
You can try to install the USB Host Diagnostics and check what is happening, on this app the root is optional.
i have no doubt that the USB works but the ntfs file system cannot be mounted directly by the OS so it unmounts it immediately after connection.
so my question still remains, is there a way to mount an ntfs file system without having root access?
thanks