Win 8 on Virtualbox on a Mac - Windows 8 General

Alright guys, I'm a first time user in virtualbox and am trying to set up a virtual machine for win 8. But when I try to boot the win 8 64x Iso, in the firststart wizard it comes up with an error "verr not supported". Is the ISO the problem, or the Mac (2006 booting a 64x kernel 1 gig mem 25 gigs allotted space for win 8)?
Thanks in advance, dan.

Related

Triple booting win8, win7 and ubuntu

Hi guys I have just downloaded win 8 from Microsoft but I want to triple boot my laptop is that please help.
Extra info : ram 4gb
Hard disk 320gb
Core 2duo processor
Sent from my GT540 using xda premium
You can dual boot win8 and win7 its a breeze, i just did follow this simple steps posted on microsoft-news.com
just make three partition on your laptop...one for each.. or you can install Ubuntu through wubi on windows 7 and windows 8 on a separate partition.. am currently using like this...
Easiest way is to install ubuntu inside windows 7 and use VMware to instal Windows 8 on virtual machine.
I did that today. Could go without windows eight tho.
thnx everyone i run win8 in VMware..
rajatbajpai0072 said:
Hi guys I have just downloaded win 8 from Microsoft but I want to triple boot my laptop is that please help.
Extra info : ram 4gb
Hard disk 320gb
Core 2duo processor
Sent from my GT540 using xda premium
Click to expand...
Click to collapse
Its actually pretty simple.Just dual boot windows 7 and 8.Im sure u knw how o do this.Then install Ubuntu alongside 7 through the boot setup!
If you had a newer CPU, I'd suggest using Client Hyper-V (from Win8) to run the other OSes virtually, but the Core 2 family lacks second-level address translation, which means Hyper-V messes up desktop performance so MS made SLAT mandatory on client (non-server) builds if you want Hyper-V.
rajatbajpai0072 said:
Hi guys I have just downloaded win 8 from Microsoft but I want to triple boot my laptop is that please help.
Extra info : ram 4gb
Hard disk 320gb
Core 2duo processor
Sent from my GT540 using xda premium
Click to expand...
Click to collapse
I had my windows 7 installed , and then i installed ubuntu. Now , lets say you installed windows 7 on a LocalDrive (c):, then in this drive there will be some files.
wubildr
wubildr.cfg
wubuildr.mbr
These are the files that gets your ubuntu booted.
So just install windows 8 normmally on some other drive. (note: dont keep any operating system in same drive. Make a 100gb for windows 7 , 50gb for ubuntu(if you not compiling any big projects) and 100 gb for Windows 8 , and the rest 70 gb a 4th hard drive )
You can store songs and stuff in any drive you want.
NOTE:
When you boot up your computer,this is what happens,
1) Bios awakes all the hardware("Goodmorning mouse,keyboard harddisk, any other devices connected too (except your internet router) )
2)Bios finds a operating system and boots up its "SELECT OPERATING SYSTEM"(called bootmanager).(in my pc when i use windows 8 and shut it down, the next time i start pc i get windows 8's boot menu. but if i use windows 7 and shut it down , and next time when i turn on my pc i get windows 7's bootmenu, You wont get ubuntu boot menu on startup)
3)Go to Windows 8 , open my computer . Now you will see that the drive on which you installed Windows 8 is now C drive..
4) Find out on which drive you had your windows 7, open it, go to program files. and use which ever software you had without reinstalling it, Like lets say if i want photoshop, then i will go to windows 7 drive, open program files, then Adobe, then photoshop cs5 and here there will be photoshop.exe, i will create shortcut on desktop (use this method only when the software publisher have not published the software for windows 8, eg TeamViewer , they released their software for windows 8 , so i wont link it to desktop from my windows 7 files.. I will download a new one.. )
Thats it.. have fun buddy..
Check this out.
Google EasyBCD. And then download that software. so if you ever mess up , then you can make a new entry in your bootmanager and name it what you want. lets say you mess up with ubuntu, and in boot menu ubuntu option doesnt come, then you go to windows 7/8 and then open up EasyBCD , make a new entry , name it Ubuntu(or what ever you want) and then point it out to "wubildr.mbr" (remeber , make backup of the three files i told above..) Also you can change the names of existing OS. Like Windows 7 can be changed into Hello, This is Windows 7 . Then this will appear in your boot screen..
Hope i helped. I know you booted windows 8 in VM, but VMs are slow... I just gave you extra info so u know what to do if you mess up on install new OS again
rajatbajpai0072 said:
Hi guys I have just downloaded win 8 from Microsoft but I want to triple boot my laptop is that please help.
Extra info : ram 4gb
Hard disk 320gb
Core 2duo processor
Sent from my GT540 using xda premium
Click to expand...
Click to collapse
It is easy install Ubuntu alongside win7 and install windows 8 to a different partision
you can install them separately, each on a partition
it is very normal and easy
i did it, i installed windows 7 then 8 then ubuntu
just make sure to install ubuntu after all because of the grub boot loader
Win 8, then Hyper-V as many different OSs as you have space for, its quick, painless, you don't need to worry about Linux over zealous bootloaders screwing everything up, unless you are running several at the same time even a moderate spec'd PC with the correct hardware requirements will run them both without much of an issue.
one thing I miss from 7 is the ability to run XP programs right of my desktop, I have some USB hardware that only supports 32bit XP, on 64 bit 7 I VM'd with XP mode, had the program icon that used said hardware right on my 7 desktop, double clicked, and for all intensive purposes it ran and worked the hardware as if it was on that very os
pretty impressed I have to say, alas it doesn't work like that on 8 which is a shame

Dual booting with Windows 8 and XP..Is it possible?

I am thinking about installing Windows 8 developer preview alongside Windows XP whether this will cause any problems?
Whether I should format Windows XP and then install Windows 8?
look here
http://forum.xda-developers.com/showthread.php?p=17673518&posted=1#post17673518
texonex said:
look here
http://forum.xda-developers.com/showthread.php?p=17673518&posted=1#post17673518
Click to expand...
Click to collapse
Before you blab,...
Dualbooting with Windows XP is special. Windows XP is so deprecated that the Win8 bootloader does not show it.
It is possible, as my computer's primary OS is WinXP; Win8 is my secondary and Ubuntu 11.04 is my tertiary OS. Only Win8 shows up in the Win8 bootloader; I had to EasyBCD and write the Win7 bootloader to my MBR and add the other two manually.
Yes, I dual-booted WinXP with Win 8... But how to dual boot Win 8 with ubuntu ?
TheWhisp said:
Yes, I dual-booted WinXP with Win 8... But how to dual boot Win 8 with ubuntu ?
Click to expand...
Click to collapse
Same way as usual. Do a straight partition and install from LiveCD/USB.
If you want to triple boot, I don't think you'll have much success with a Wubi-based install because it would only write to the bootloader of the Windows install that it was installed to AFAIK. I transitioned my Wubi install to a full partition once I installed Win8. It didn't stop it from not appearing on the Win8 bootloader.
I have Windows 8 and Ubuntu 11.10 in separated partitions. I had Win 8 installed first, then I installed ubuntu, but GRUB doesn't add Win to boot menu, when I run "sudo update-grub" it doesn't detect Windows 8

[Q] Windows 8 on vmware

Has anyone been able install Windows 8 on vmware esxi 5? When I create a new virtual machine I set the settings for a Windows 7 PC. But when I boot from the dvd or iso image it disconnects and shuts down the virtual machine after it loads the installation files. (right after it boots from the dvd)
Windows 8 on eSXi 5
Currently its not possible, need to wait for esxi 5 updates.. check belwo guide
mytricks.in/2011/09/windows-8-on-vmware-vsphere-5-esxi-5.html
I install Windows 8 in vmware Workstation 8 without any problems.
Maybe this ist a solution for you.

Help with dual booting Windows 8 and Fedora Linux

My PC was previously on dual boot with Microsoft Windows 7 (x86) and Linux Fedora 17 (x64). I installed Windows 8 (x86) on the Windows 7 partition by formatting it. I'm not able to install the GRUB 2 bootloader from the Fedora LIVE session (I think Windows 8 secure boot is blocking it).
I'm thinking of going back to Windows 7. Does anybody have a better option?
Sent from my Motorola Defy with CM9
swapnil360 said:
My PC was previously on dual boot with Microsoft Windows 7 (x86) and Linux Fedora 17 (x64). I installed Windows 8 (x86) on the Windows 7 partition by formatting it. I'm not able to install the GRUB 2 bootloader from the Fedora LIVE session (I think Windows 8 secure boot is blocking it).
I'm thinking of going back to Windows 7. Does anybody have a better option?
Sent from my Motorola Defy with CM9
Click to expand...
Click to collapse
That's really weird, I had Windows 7 and Ubuntu 12.04, I had to fix the GRUB bootloader after installing Windows 7 on a new partition after I had Ubuntu alone. I installed Windows 8 on that 7 partition and it didn't mess with the bootloader. Try fixing GRUB with an Ubuntu 12.04 LIVE session.

[HELP] Installing Windows 8 over Windows XP

I have a desktop computer about 4 year old, running Windows XP. It has hardware robust enough to run Windows 8. So, I created a bootable usb drive using Windows 7 usb tool in my laptop running Windows 7 HP x64. The usb drive works fine on my laptop, both while booting from it as well as using it while already booted on Win 7 to install Windows 8. But when I insert it to my desktop, and run setup.exe, it shows that setup.exe is not a valid win32 application. And if I boot from it, just shows the Windows 8 logo and does nothing, even if I leave it for a couple of hours, I have purchased Windows 8 for both my pcs but I am not able to install it on my desktop. Help.
Sent from my GT-S5570 using xda app-developers app
Windows XP 32-bit will likely be unable to start the 64-bit setup.exe file, you'll have to boot the installer from the USB stick or from a DVD.
or use a 32-bit ISO and install a 32-bit version of Windows 8.
As nbates said you can't run apps with different architecture. Make sure you have the right settings set in the BIOS (make the USB device bootable) and install again. I think that there was an app called Wintousb or something like that. That's the best app for making a bootable usb.
EDIT:
WinToFlash, that's how the app is called
Sent from my LT22i using Tapatalk 2
nbates66 said:
Windows XP 32-bit will likely be unable to start the 64-bit setup.exe file, you'll have to boot the installer from the USB stick or from a DVD.
or use a 32-bit ISO and install a 32-bit version of Windows 8.
Click to expand...
Click to collapse
Since Windows XP both a 32Bit and a 64Bit version exist. OP therefore should clearly specify which machine have what OS version running...
EDIT:
Another worthwile freeware tool is WiNToBootic - the ultimate Windows Boot Disk Maker
jwoegerbauer said:
Since Windows XP both a 32Bit and a 64Bit version exist. OP therefore should clearly specify which machine have what OS version running...
Click to expand...
Click to collapse
yeah since XP 64-bit was mostly unpopular i'm assuming they're using 32-bit XP.
cheema1234 said:
hello my name is garry . i have IBM destop with 1 GB ram Intel pentium 4 processor 3.00E GHz (3000.0 MHz) MOTHERBOARD intel 865GV. i was trying to install window 8 pro on this but when i was trying to install on it it shows your system doest support NX compatible .i know what is this but i want just ask can we install window 8 without NX .do u have any solution for this i mean bypass this NX .i have found these error code while installation.Error Code: 0x0000005D
Parameters:
0x0306170A
0x756E6547
0x49656E69
0x6C65746E
please help me
Thanks
Click to expand...
Click to collapse
Watch:
http://www.youtube.com/watch?v=j-5kVNwPUo4
http://www.youtube.com/watch?v=JwLGNZ1PNrU
HTH

Categories

Resources