hi there. so this is my problem. i have cm7 .35 kernel, and every time i want to search for networks, it searches for a while, but then it says "error while searching for networks". so i must have it set to automatic selection. everything works fine with stock 2.2, stock 2.3 and miui. but it doesn't work with cm7 (both .35 and .32), aurora (it used to-untill about v2.09), lewa os and mokeeos (first-class rom v3), and also of i put in another sim card, still doesn't work. any help anyone?
Your problem is typical problem of CM7.
forumber2 said:
Your problem is typical problem of CM7.
Click to expand...
Click to collapse
i know that. and it's the same problem at cm9. ok lewa and mokee are based on cm7, but why aurora? i read somewhere that the problem is in too old baseband, and that it can be fixed (at least at some other phones) by flashing newer version of baseband. could that be true? and where can i get baseband?
Related
Guys,
So if am reposting the same query. Tried searching but didnt get any result.
I'm using GalnetMiui ICS as my primary rom. Saw this thread about multiboot and tried it. v0.4 didn't boot from 2nd boot. So i installed the old version v0.3 .. I could flash CM9-ICS-MR0-111207-jordan-KERNEL-2.3.4-Quarx and update it to CM9-ICS-MR0-111211 .
But now i'm not able to boot from 2nd init !
I tried doing the whole thing again starting from installing MIUI then applying multiboot patch and then installing CM9 ... but in vain.
Please help me get through.
NB: i noticed one more thing, running cm9 in 2nd boot is not giving me any network, when i try searching for a network its shows some error.
vsvj said:
Guys,
So if am reposting the same query. Tried searching but didnt get any result.
I'm using GalnetMiui ICS as my primary rom. Saw this thread about multiboot and tried it. v0.4 didn't boot from 2nd boot. So i installed the old version v0.3 .. I could flash CM9-ICS-MR0-111207-jordan-KERNEL-2.3.4-Quarx and update it to CM9-ICS-MR0-111211 .
But now i'm not able to boot from 2nd init !
I tried doing the whole thing again starting from installing MIUI then applying multiboot patch and then installing CM9 ... but in vain.
Please help me get through.
NB: i noticed one more thing, running cm9 in 2nd boot is not giving me any network, when i try searching for a network its shows some error.
Click to expand...
Click to collapse
It is not possible to run newer versions including 111207 in multiboot due to the new kernel.
you need to make this your primary boot
hope i could help you, greetz Esok
sadly understanding the truth.
Yes , i sadly am understanding it. But I've found out a dumb method to use dual boot. Flash the respective kernels when in need of switching from GMIUI to ICS CM9.
but still the CM9 ICS is not giving me any phone signal [in 2nd boot], i dont have any sim pin activated.
If i make CM9 my primary rom , phone signal is ok and i can make / recieve calls. ??
For now i need Galnet Miui as my primaryu ROM atleast until the ICS CM9 is officially released for Defy...
cm9 is my primary rom and everything works great, at this moment i'm on the phone
maybe you could just make a nand backup of your wajkiui and flash cm9.
if everything works you can keep cm9 and if not just flash back
greetz esok
Today I installed CM7.2 following the instructions in the thread. I came from stock froyo 2.2.1 and everything worked fine but had some random reboots.
Since I have CM7.2 installed my wifi doesn't work anymore. If I turn it 'on', it doesn't search for available networks. It disables itself after +-30sec. I also noticed I don't have a Mac-adress anymore.
Is it possible that the problem is caused by doing no 'remove caches'. It wasn't in the instructions so I didn't do it. Should doing that fix the problem?
reflashing always works hehe
Tried it and it worked.
Sorry for the useless thread...
I am having this same problem with the newest Aurora ICS, but reflashing didn't fix it.
If you want a stable GB rom forget about the official roms and use any custom GB with .32 kernel. These are the most stable ones. I use ezet's.
Hi everyone,
I was trying to post this in another thread but I'm unable to post in the Development sector.
I have a Motorola Defy+ running the Android 2.3.5, I've tested the following ROM's:
CM9 by quarx
CM9 by Epsylon
Both runs just fine, but I was thinking this weekend to test another rom's to have new experiences and found out about the MIUI, which seens to be a very good rom.
But the fact is that I'm facing some troubles trying to run this rom.
Everytime I try to apply it, the Recovery says to me that the install went ok, but once I reboot the phone, I got stuck in the Motorola Bootloader screen, and I have to flash a stock SBF again.
I've tried the STABLE (GB) and the BETA (ICS), both got the same problem.
Different versions of 2ndinit (1.4, 2.0, 2.3).
Does anyone know why I'm having this problems?
I would appreciate any help.
Best regards,
AFAIK, MIUI requires Froyo kernel and Defy+ has GB kernel.
Evolution-VII said:
Hi everyone,
I was trying to post this in another thread but I'm unable to post in the Development sector.
I have a Motorola Defy+ running the Android 2.3.5, I've tested the following ROM's:
CM9 by quarx
CM9 by Epsylon
Both runs just fine, but I was thinking this weekend to test another rom's to have new experiences and found out about the MIUI, which seens to be a very good rom.
But the fact is that I'm facing some troubles trying to run this rom.
Everytime I try to apply it, the Recovery says to me that the install went ok, but once I reboot the phone, I got stuck in the Motorola Bootloader screen, and I have to flash a stock SBF again.
I've tried the STABLE (GB) and the BETA (ICS), both got the same problem.
Different versions of 2ndinit (1.4, 2.0, 2.3).
Does anyone know why I'm having this problems?
I would appreciate any help.
Best regards,
Click to expand...
Click to collapse
MIUI is a froyo based ROM.
Downgrade to froyo if you need to flash it..
Sent from my Defy+ using Tapatalk 2
So, I tried to flash cm10.1 version 7 where wifi should work, but I dont know why, it doesnt. Then I flashed muiu based on aurora and it doesnt work too. I flashed another miui that I had and it worked... but it was an old version. So I decided do downgrade to 2.2 and then to 2.3 again.
Now, its still not working... what can be the problem?
So, I've installed CM 11 Beta 3 + an OC Kernel and now it just won't find my network, it just keeps searching and searching and finds nothing, I've also tried writing it manually but it says "Out of range", it is needless to say that before installing the kernel the wi-fi worked pretty well, it's not a ROM trouble but a kernel one I guess. I've also tried other kernels and it keeps failing, also tried different ROMs such as Pure AOSP 4.4.2, CodefireXperiment and it doesn't work either, any idea? somebody?
The wifi kernel fix isn't working either.
works great for me
Sherbox said:
So, I've installed CM 11 Beta 3 + an OC Kernel and now it just won't find my network, it just keeps searching and searching and finds nothing, I've also tried writing it manually but it says "Out of range", it is needless to say that before installing the kernel the wi-fi worked pretty well, it's not a ROM trouble but a kernel one I guess. I've also tried other kernels and it keeps failing, also tried different ROMs such as Pure AOSP 4.4.2, CodefireXperiment and it doesn't work either, any idea? somebody?
The wifi kernel fix isn't working either.
Click to expand...
Click to collapse
Works great for me, with the original kernel in room.
beta 3.1 room-
Code:
http://www.mediafire.com/download/da3e62ib5rdvq6q/cm-11-20140101-UNOFFICIAL-e610.zip
CyanogenMod 11overclocking kernels
Code:
http://forum.xda-developers.com/showpost.php?p=48595803&postcount=828