Hi, trying to root my Samsung Galaxy Tab 10.1 US Retail to add ad hoc support. Got the files pushed to the sd card via adb, but reboot recovery command only turns off the device. When using the key to enter recovery mode I get the error when selecting to flash zip from the sdcard E:unknown volume path [/sdcard]. Any help on sorting this would be great as I have given up googling a fix, and even tried rooting with Z4 to avail. PLEASE HELP ME!!!!
Hi!
I have tried to flash unlocked bootloader V3 from civato's guide, and I could not pass step 6 (flashing bootloader with nvflash or blacthund3r's tool). None of this method didn't work (Nvflasher didn't flash anything, and blackthunder tool was stuck at formating some partition (can't remeber which one).
Last successful step was flashing ICS rom (full leaked version of 1.031.00).
After that I could boot up, and rom worked all fine.
But, after that, I got my self in trouble.... I pressed Vol- & PWR, tablet did his thing, and when reeboted, I got stuck in Acer logo screen with red writing "Boot verified failed"
I understand that I have messed boot somehow... And to fix this i have to flash new bootloader through nvflash and apx mode. I tried to put update.zip on sd card, but it didn't helped (I still get boot verified failed)
Here, I got another problem. When I have connected tablet in apx mod to pc, i got message "driver not installed". Now, in devices I have "unspecified APX device".
BTW, adb doesn't see my device?!
I hope that You guys can help me with these problems, so that my tablet is operational an running again.
Thanks in advance!
boot verified
I have the same problem but I can not find the v3 bl and CWM Recovery Package to flash with the apx flash utility. If you find them let me know.
This what you have do:
Your recovery is borked so u have to put a new one on there, the best way to
go about doing this is to:
Download the V3 AND CWM Recovery package and apxFlash that.....Done!!
your need to flash the WHOLE PACKAGE b/c ARI reports yr BL as plain old stock
You cannot replace the failed recovery with CWM with the plain old stock BL!!
You have to flash the patched BL as well, so again
You must flash the whole pckg just like in the guide OK
if later u want the stock recovery back u can use ARI to do that but after the apxflash!!!
Thanks for your replay! I'l try to do this and hope it will work...
By "WHOLE PACKAGE" you mean unlocked bootloader and CWM? Or, something else?
Check this thread for V3 and CWM.
boot verified
Yes "WHOLE PACKAGE" unlocked bootloader and CWM
The tread you sent me I do not know how to use the nvflash never works for me.
I have been trying for 3 days and no luck.
Let me know if it works for you or how you make out
zozo10k said:
Hi!
I have tried to flash unlocked bootloader V3 from civato's guide, and I could not pass step 6 (flashing bootloader with nvflash or blacthund3r's tool). None of this method didn't work (Nvflasher didn't flash anything, and blackthunder tool was stuck at formating some partition (can't remeber which one).
Last successful step was flashing ICS rom (full leaked version of 1.031.00).
After that I could boot up, and rom worked all fine.
But, after that, I got my self in trouble.... I pressed Vol- & PWR, tablet did his thing, and when reeboted, I got stuck in Acer logo screen with red writing "Boot verified failed"
I understand that I have messed boot somehow... And to fix this i have to flash new bootloader through nvflash and apx mode. I tried to put update.zip on sd card, but it didn't helped (I still get boot verified failed)
Here, I got another problem. When I have connected tablet in apx mod to pc, i got message "driver not installed". Now, in devices I have "unspecified APX device".
BTW, adb doesn't see my device?!
I hope that You guys can help me with these problems, so that my tablet is operational an running again.
Thanks in advance!
Click to expand...
Click to collapse
Did you install acer usb drivers.
EDIT: SOLVED!
Mods, you can close this thread.
shaun298 said:
Did you install acer usb drivers.
Click to expand...
Click to collapse
Hi!
Yes, I have dl the drivers from Acer site and installed them. But pc only recognize tab in APX mode. And adb doesn't see my tab.
Every method that I have tried (APX flash tool and nvflash) hangs at some part. APX flash tool hangs at "Flashing bootloader EBT - stage two, and nvflash hangs at formating partition 4.
Hi, I´m having similar troubles to get acer drivers working on windows 7 32. I installed newest acer web drivers, ADB works OK. When I get to apx mode I need to manually point to drivers, I have an APX driver with a sign and turns to Acer Picasso USB Boot-recovery driver. The problem is that not any of the tools sees this as a connected tablet in apx mode (afterota or apxflash).
I am doing something wrong? I know a500manager shows me the tablet is in apx mode "please install drivers" when i get APX driver with Sign, after installing the driver manually it just doesn´t show connected anymore.
thanks
hernborc said:
Hi, I´m having similar troubles to get acer drivers working on windows 7 32. I installed newest acer web drivers, ADB works OK. When I get to apx mode I need to manually point to drivers, I have an APX driver with a sign and turns to Acer Picasso USB Boot-recovery driver. The problem is that not any of the tools sees this as a connected tablet in apx mode (afterota or apxflash).
I am doing something wrong? I know a500manager shows me the tablet is in apx mode "please install drivers" when i get APX driver with Sign, after installing the driver manually it just doesn´t show connected anymore.
thanks
Click to expand...
Click to collapse
Download and install the Google USB drivers.
Google.... Android USB Drivers, and you should get the page for the Android SDK with google drivers.
In Apx mode, go to device manager on your PC, and manually install the drivers. Don't let it search automatically, do it manually. If you get a compatibility warning, ignore it.
Should hook you up with normal, ADB and APX drivers.
zozo10k said:
EDIT: SOLVED!
Mods, you can close this thread.
Hi!
Yes, I have dl the drivers from Acer site and installed them. But pc only recognize tab in APX mode. And adb doesn't see my tab.
Every method that I have tried (APX flash tool and nvflash) hangs at some part. APX flash tool hangs at "Flashing bootloader EBT - stage two, and nvflash hangs at formating partition 4.
Click to expand...
Click to collapse
THANKS FOR NOT TELLING US HOW YOU SOLVED IT:good::good::good::good:
Hi guys, so I rooted my Galaxy Grand Prime and when I turn it off I get a no command error and then get taken into the recovery menu. From there I have to manually select reboot system now before I can get it to work. Can anyone please help me. Also I have not flashed any custom recovery like twrp. Thanks.
Hello
My nexus 7 has brick, does not have the bootloader unlocked and does not have usb debugging enabled, so I can not flash. Someone can help me or know if with Nexus Tool Kit you could recover it by restoring it with the backup (I can not access Recovery Mode).
If it is possible to do that I can send a Backup to try or someone knows how to fix it, thanks.
A 'backup' will not help you (btw. you can download the factory images from Google, that's all you need to re-install your device), but you need to have access to the bootloader mode. If you cannot access bootloader / recovery mode there is no chance. What did you do to have bricked the device?
I accidentally flashed my Z380KL (P024) with stock ROM using TWRP, and now the tablet won't boot. The tablet is only recognizable under qhsusb_bulk mode. There is no ASUS logo, and the screen won't turn on. I have all the necessary tools ready, including Tool Studio, eMMC DL and QFIL, but I have trouble finding the stock ROM including the mbn or the rawprogram.xml file, and there is not enough resources on the net. I looked up some blogs and they told me to have a backup of someone's eMMC backup, but I can't seem to find one online. Any help is much appreciated.
Also I have a TWRP backup of the LineageOS ROM earlier if that helps.
Does anyone have the full firmware for Z380KL? The one that contains rawprogram.xml, patch.xml and such