[Fixed] Bad files to root Streak 5? - Streak 5 General

Hello,
I am using this link: http://forum.xda-developers.com/wiki/Dell_Streak_5/Flashing_Guide#Rooting_your_phone
to try and re-root and re-rom my Streak 5. I had gone through the whole process long ago when the process was different, but at some point I accidentally downloaded an official update which over-wrote my carefully installed new ROM. Soon after, I dropped it and cracked the screen, and consigned it to the junk corner of my desk. However, after finding out how to get a replacement screen and fix it (all by myself!) I have breathed new life back into this little gem. At this point, however, I would like to get it back to life to use as a small tablet for my kids.
So I am trying to do the right thing and figure this out my own, but I keep running into road blocks. I tried to download the repair tool (QDL) and Streakflash listed on the link, and the Dev-host site sends me a file, but when I get them on my PC, it says they are bad files. Does anyone know where I can get the correct files?
Thanks for any help!

Fixed
Ok, so third time is the charm. Finally downloaded a good image and it seems to have worked.
Now I have a new problem, but I'll save it for a later post.

Related

[Q] stuck at shut down screen after interrupting update

tl;dr: Interrupted update. cant do jack. tried acer tech support. failed
I grew bored with waiting the two minutes for my tablet to install the new update. so i stood up and hit the power button to put it to sleep like a boss. then i cam back later, the lock screen was unresponsive
i figured out be double tapping the pwr button i was able to unlock the tablet to see the powering down screen (see attachment). I can get to the setting menu, but evrytime i try to mess around in it, the window closes itself.
an interesting note is that the time is wrong, and the battery suddenly went from 100% to 15%
I called acer tech support, and with ther guidance...
pressed the reset button to no effect
powered on holding the pwr & vol- buttons down to get an error (see attachment). then the tablet turns off.
Ive dled some "update.zip" files i found online that are supposedly used to unbrick the tab... but i just got the same error picture(see attachment)
one other thing i tried was to hold the power and vol+ buttons. this cleared a chache, but had no other effect.
I am a noob at droid, but not to tech. i would like to avoid perma bricking, and im unsure about mailing this in. waiting is gay. I would like to restore it to factory settings w/o rooting it etc. as ive never done that before. but im not opposed to installing a CFW if it somes to that...
Im looking for ideas guys here guys. wtf is wrong with this thing?
Haha
Lmao "hit the power button to put it to sleep like a boss", funny ****.
Can't help you though sorry
ive been around he web, and have seen this exact series of symptoms happen to a handful of other guys... i haven figured out a solution yet, and it is looking more and more like ill be sending it in via warranty
my best guess at this point is i have corrupted a crucial system file. as to why i can do jack in the factorys recovery mode... idk. but then again, idk what the factorys recovery mode should look like or how it would function. youtube only shows CWR... which i dont have
if i believed i could anything reasonably withing my abilities, i would... but voiding the warranty on a long shot seems dumb.
still ANY ideas would be great
I too faced exactly the same problem today.. Dunno why this is happening... I am too worried now... Kindly post the solution as you find them...
Am sure calling tech-support is just waste of time..
Thanks in advance..
IM GOLDEN...
Ive reflashed to the original factory build. the problem was with the "update.zip" files i have been using. i guess they were corrupt.
multiupload<dot>com/WCT2FYLMQC
this is the file i used. I tried several from other guides, etc... a guy on another board told me to use this one. i put it on the root of my SD card, then held the power and vol- buttons until the loader had started. it took awhile, and it looked like it froze during the process...
DONT TOUCH IT
just let it do its thing, and it will reboot itself and run through the setup process like when it was new.
npena said:
IM GOLDEN...
Ive reflashed to the original factory build. the problem was with the "update.zip" files i have been using. i guess they were corrupt.
multiupload<dot>com/WCT2FYLMQC
this is the file i used. I tried several from other guides, etc... a guy on another board told me to use this one. i put it on the root of my SD card, then held the power and vol- buttons until the loader had started. it took awhile, and it looked like it froze during the process...
DONT TOUCH IT
just let it do its thing, and it will reboot itself and run through the setup process like when it was new.
Click to expand...
Click to collapse
How to put this file on the root folder when am not able to switchon the Tablet itself... and how reliable is this file??
stuck on same screen also!
My friend and i who both purchased this Acer Iconia tab are both having the same problem. We both received a message on the tablets to do the update. We both got stuck and have gone thru tech line and there is no remedy. She was able to return hers within the 15 day period; I on the other hand am a week over that so have to mail it to Acer for repair. I'm thinking this is more than a cooincidence and there is a problem more spread... Acer would neither verify or confirm....
buntzmehta said:
How to put this file on the root folder when am not able to switchon the Tablet itself... and how reliable is this file??
Click to expand...
Click to collapse
He said the root of his SDCARD. You can take out the sdcard and put it in a sd cardreader on a computer and copy the file to it then put it back in the tablet. The file worked for him so it might be worth trying. Just have patience while it is loading as some of these updates take a while to load and sometimes you may not see anything happening but it is. The more patches and roms you load on Android the more you'll learn to just leave it alone and let the updates finish. Its pretty rare for updates to be messed up. Its usually people getting anxious and clicking on stuff.
Good luck
Sent from my A501 using Tapatalk
still stuck on shutdown screen any updates?
Anyone had any luck with a fix? If not --sending it to Acer for warranty repair after the hurricane hits..Sure hope this isn't a wide spreasd Acer issue do to the new download. Wish I could just return the thing all together. Worked well while I had it a whole 3 weeks...... Thanks in advance for any information.
npena said:
IM GOLDEN...
Ive reflashed to the original factory build. the problem was with the "update.zip" files i have been using. i guess they were corrupt.
multiupload<dot>com/WCT2FYLMQC
this is the file i used. I tried several from other guides, etc... a guy on another board told me to use this one. i put it on the root of my SD card, then held the power and vol- buttons until the loader had started. it took awhile, and it looked like it froze during the process...
DONT TOUCH IT
just let it do its thing, and it will reboot itself and run through the setup process like when it was new.
Click to expand...
Click to collapse
Thanks a lot dear npena.. you are simply great.. i was very anxious initially to try your method as no other member here who face the same problem thanked or recommended your suggestion...
I tried it and it worked... I am really very thankful to you...
Cheers..
you are my hero indeed.. thank once again..
BuntZ
Friends, who face this problem you must try it... it just takes few mins b4 you can get your acer tab to work again beautifully without loosing any settings or installed apps... they remain intact...
Yay!
Glad you got it running again - had a similar problem when doing a ota update myself, was so worried I bricked the tab, went thru about 7 update.zip files until I found one that magically worked, letting me get back into the system and flash the correct rom for my region
hi! i have the same problem with my a500. I write a guide to solve this problem. Problem in firmware. here is the gude http://forum.xda-developers.com/showthread.php?t=1572622

Need some help please and thank you

Hello everyone,
I have been on this site for sometime, always reading and waiting to be able to take the plunge into all the fun.
I am a Bell subscriber, and have enjoyed my phone till this point, but now I would like to be able to get everything back to normal.
A couple months back, I messed up my Atrix and decided to flash the following sbf file onto it, 4.2.11.MB860.Retail.en.FR.
It has been running good since then.
Now I want to be able to get back to the Bell software and be able to take the OTA updates, and have my car dock working again.
I have read until I am blue in the face, and there is so much jumping around from thread to thread, I am really lost when it comes to start this.
My phone is currently rooted using Gingerbreak 1.20, I have backed up everything, and am willing to do anything to this phone to accomplish this. I am not to worried about it, as I have purchased the extended warranty on it, so I hope I am covered.
My questions are:
Do I need to unlock my phone to proceed to the next step?
if so, I use ihop-bell?
I install CWM, I currently use the one with Rom-Manager
I download the Bell 2.2.2. Gobstopper? Install it?
I have the current version of RSD lite installed on my computer
then I ????? this is where I get lost again.
I know some of you are saying read the steps posted, but it seems they all lead to different pages and I kinda got lost in the process. Would someone point me to a step-by-step that could help me please?
Sorry for inconveniencing any of you, but it is greatly appreciated
Thank you
Fred

Acer 500a Rooted and unable to update

I have an Acer 500a I just bought off carigslist. Initially I thought it would be fine but then I realized I was inheriting someone elses problems. I hope someone may be able to help.
Within the first few hours I was noticing google Play crashed a number of times and struggled to update from Market. Somehow the update went through but now there is a system update that won't go through. I'm able to down load it and when i restart the computer to complete installation the screen goes black and says: booting recovery kernel in the corner. I then see a picture of an android and a load bar which after 2-4 seconds the android is on his back and an exclaimation mark is coming out of his belly.
My android version is 3.2
Kernel version
2.6.36.3+
Build number
Acer_a500_7.006.01_COM_GEN2
I'm pretty sure its rooted and i think that might be why its not playing nice with google market and system updates. I called the old owner and explained the problem and he just said he had it rooted and he thought he unrooted it. There is an ap called superuser in aps. (although if it were rooted would'nt I be able to uninstal some of thecrap software it comes with like GOLF HD? -- it won't let me).
The system update is for Acer_a500_7.014.01_COM_GEN2 8.88mb
My problem is all of the force closes I'm getting and the inability to update the system. Any thoughts? I don't have a usb cord to connect it to a desktop either =(
I am a bit out of practice, but...
Should be pretty simple to fix. From what I am seeing, you are running a stock rom. Just because the superuser.apk is installed on the system does not mean it is rooted, but it probably is.
Hit the market, grab "Root Checker" - simple tiny program to let you know for sure if your tab is rooted or not.
https://play.google.com/store/apps/details?id=burrows.apps.rootchecker&hl=en
From what I understand - automatic system updates will fail when trying to apply them to a rooted or modded system. Probably why you cannot auto-update.
My advice at this point would be to:
1) Since you just bought it, just do a factory wipe on it. That will remove all the stuff the prior owner had running on it and will result in a unrooted tab that should be able to get auto updates without a problem.
2) Un-Root it. Once the tablet is unrooted, the system should update without any issue.
As for your Play Store issues - I have never heard of or personally seen any issues caused with installing apps from the store on a rooted device. I have seen a few apps that will refuse to run on a rooted device - but that does not sound like your problem.
I would go with option 1 - just factory wipe the thing. Prior owner may have made tons of changes to the OS that we will never know about, and may have handed you a unstable system. Start fresh. Wipe it out.
Hope this helps you out! Let me know if I can answer any questions.
k thank you so much for the quick reply! I downloaded the root checker and it Is rooted. I did a factory wipe as found in the settings privacy tab when I bought it. That factory reset did not unroot and only cleaned out some of the aps on the device. Is there a better or more surefire way to unroot it? If I reset with the volume down key will it hard reset it?
Thank you for you help!
Draight
Okay.
I am about a year out of practice with my a500 - but from what I am think, if a factory reset still results in a rooted device - the prior user installed a stock ROM that comes pre-rooted.
I highly doubt being rooted is causing the issues you are running into.
At this point if you just want to get back to stock you can probably just install the Acer Recovery Manager from the market and use it to reflash a stock unrooted ROM. Or I see a few guides about how to manually restore back to stock over in the dev section for the a500.
Others will correct me if I am wrong, but I think Acer Recovery Manager should take care of your problem.
Hope this helps!
(Edit: Or you can just download the official stock 4.x rom (ICS) from the dev section and flash that. 3.2 is pretty slow and wonky in my experience, you should be able to just download a 4.x ROM and flash, since you are rooted. Again, I am way out of practice. Don't do anything before reading up!)
(Edit again: I think I was making this harder then needs be. Just flash any stock 3.2 unrooted ROM, done. After you do that the automatic on the air update should kick in for you and update you to ICS)
Thanks for taking the time to work with me on this. I downloaded the program you suggested and tried to use a stock rom. When i went to reboot I had a picture of an android looking up at an exclaimation mark. It was froze like that until I restarted it. Now its back to the way it was, rooted and unupdatable.
I'm probably going to try to just wipe it all over but do i need to plug it into my computer somehow? I dont have a usb connector for the tablet, just the wall charger plugin. can i just download a rom and use the utility to try install it? when I reboot it am I supposed to be pressing the volume button?
I've read a few other forums but usually they sound pretty intense...
draight said:
Thanks for taking the time to work with me on this. I downloaded the program you suggested and tried to use a stock rom. When i went to reboot I had a picture of an android looking up at an exclaimation mark. It was froze like that until I restarted it. Now its back to the way it was, rooted and unupdatable.
I'm probably going to try to just wipe it all over but do i need to plug it into my computer somehow? I dont have a usb connector for the tablet, just the wall charger plugin. can i just download a rom and use the utility to try install it? when I reboot it am I supposed to be pressing the volume button?
I've read a few other forums but usually they sound pretty intense...
Click to expand...
Click to collapse
Hmmm..
Try the thread I linked two in my second edit of my last post. You just need to grab the stock and unrooted 3.2 - put it on a MicroSD card as update.zip - then reboot with vol rocker and power switch to get the system to flash the update.
That *should* work just fine.
(Edit: Forgot the link! http://forum.xda-developers.com/showthread.php?t=1839313 - there you go)
Thankw, I am going to try it after readingna bit more. Do I need to have clockworkmod installed for all of this?
draight said:
Thankw, I am going to try it after readingna bit more. Do I need to have clockworkmod installed for all of this?
Click to expand...
Click to collapse
Nope. Just snag the stock unrooted 3.2 ROM - place it in the root of the MicroSD card as update.zip
Power down.
Power up with VOL + and POWER key held at the same time (you can let the vol rocker go when you see text appear in the upper left corner)
Should be all you need to do. Worst case; it does not work and returns you back to where you are now. Worth a shot.
If that does not work, let me know so I can do a few mins of homework and help you further. Been a long time since I have changed ROMS or had any issues with my a500.
I have bricked it twice by not following directions all the way or just making simple mistakes, but from what I have found there is always a way to recover.
Just tried it. I copied the boot zip to sd card and renamed update.zip and reset..It looked like it was going to download after showing some text in the corner and then an exclamation mark appeared above the androids head... I left it and after a few.min it rebooted back
draight said:
Just tried it. I copied the boot zip to sd card and renamed update.zip and reset..It looked like it was going to download after showing some text in the corner and then an exclamation mark appeared above the androids head... I left it and after a few.min it rebooted back
Click to expand...
Click to collapse
Hmmm. Odd.
Like I said, I am rather out of practice.
Someone more experienced them me: please help me point Draight in the right direction here?
Thanks for trying to help. =(
I wish that my tablet wasn't having such issues. I;m going to try to scramble around the forums and see if I can find some advice...If anyone has a suggestion please let me know.
Thanks again entropy,
Draight
Update:
So I've been tinkering around with it a bit more and I found a usb cord that plugs it into my computer. I keep finding boken links on this site so Im struggling to find an update I can use to flash to. I downloaded a different super user program which allowed me to temporarily unroot my device. I then restarted it and no root checker says its no rooted and I cannot find the superuser program. I think I have somewhat unrooted it -- but I think the real issue now is the recovery tool. I keep reseting it - hard reset, or factory reset and it wipes everything away but when i try to update it gets about 1/3 of the way up the bar then it stops with an '!' Mark above the droid. Im kind of annoyed at this point and hoping for some new links or some ideas on how to repair the recovery piece.
Draight
Go to the Dev section, and grad a couple of the ICS Update roms. You will see them listed for the a500. Make sure they are the FULL update roms. Should be about 3-400mb. These contain a FULL ICS Update Rom, and not a patch file.
http://forum.xda-developers.com/showthread.php?t=1816560
Then, go to the Themes and apps forum. You'll see a sticky that has the Acer Update Decrypter.
http://forum.xda-developers.com/showthread.php?t=1869505
Now, unpack the decrypter, and select one of the ICS Updates. Then hit Start. Take a couple minutes, but you will have a duplicate file with the word "decrypted" added to it.
Wait, you are not done yet.
Using a program like 7zip, or even Winzip, open the decrypted file. DO NOT EXTRACT, just open it and pull the update.zip to your PC's desktop.
Copy that update.zip file to your Ext SD Card of the tablet. Don't be putting it in any folder, just copy it to the root of the card.
Now, you still ain't done.
With the tablet off. Press and hold Vol+ and then PWR. Hold them both untill you start to see text about installing blah blah blah, then release the buttons.
If it completes, and you can reboot into ICS, then you are good to go.
If something fails during installation, then decrypt the other update Rom file you downloaded, and do the same procedure. Usually one of the 2 or three should work for you.
Note these are for the a500, and not the a501.
One more thing. It's advisable you get your UID number before doing these things. You probably won't need it, but it's nice to have written down in case you need it in the future. Inf to get it is at;
http://forum.xda-developers.com/showthread.php?t=1624645
MD
Thanks! I am downloading a few of the FULL ICS roms:
*Acer_A500_1.031.00_WW_GEN1 : http://d-h.st/uAy
Acer_A500_1.031.00_PA_CUS1: http://d-h.st/idO
Acer_A500_1.041.00_WW_CUS1: http://d-h.st/Yt5
*Acer_AV041_1.054.00_WW_GEN1: http://www.theandroidcollective.org/...00_WW_GEN1.zip
*Acer_A500_7.014.16_041.206.01_COM_GEN1: https://docs.google.com/file/d/0B_bk...hVc1RVcHc/edit
The I downloaded the ones ending with Gen1. Once they are downloaded I will continue with the instructions. Thank you so much for your help! I will post how it goes later tonight.
Draight
I just decrypted both:
*Acer_AV041_1.054.00_WW_GEN1:
*Acer_A500_1.031.00_WW_GEN1
Both get get to the third bullet quickly and the bottom says DONE! It takes like 4 seconds. I don't think the Decryption key of $12 is working
[*] Opening file: Acer_A500_1.031.00_WW_GEN1.zip
[*] Decrypting using key $12
[*] Writing decrypted file: Acer_A500_1.031.00_WW_GEN1_decrypted.zip
I try to extract something from the decrypted file and it says the file was not downloaded properly and I should try redownload it...it says its not a proper archive
wahoo!
So that worked! I down loaded the file Acer_AV041_A500_1.033.00_PA_CUS1 and extracted the update. I palced the update on the sd card and booted with the power and sound volume pressed down. it went through the installation procedure and restarted twice before saying it was upgrading my aps and BOOM its got ICS and everything looks great. Thank you so much for your help and I hope that this paper trail is able to help someone in the future
My problem is that I'm on ICS and I'm rooted, but I just can't download a custom recovery. I've tried, and I haven't gotten anywhere
Sent from my SPH-L710 using Tapatalk 2

Failed to flash GApps, soft brick, nightmare.. A novel with a solution.

This started as a beg for help thread, but since the GS4 is coming up on 3 generations old, help is quite slow, yet does still exist as of this edit (3-20-15).
None the less, I will try to explain what happened so that people searching for similar problems might find this thread and resolve their issues.
I soft bricked the phone flashing PacMan. ... The instructions CLEARLY stated that you need to flash the rom, then flash GApps. Well, I forgot to Flash Gapps because I was so excited that I had a successful root and new rom to test that I finger ganged the phone.... The phone booted just fine and worked just fine, but I did not have ANY google apps, and went into a panic... LESSON #1 DO NOT PANIC......
What I failed to realize is that Android Lolipop (at least PacMan's version) requires the user to select options in the developer section of the settings menu to enable you to boot into your custom recovery after you have flashed your custom rom.... I DID NOT KNOW THIS and the information was NOT readily available. So what happened was I panicked and tried to flash another recovery which was apparently NOT the correct recovery for my phone.. (the cascade of errors began here). My phone was soft bricked and NOTHING I did would get me out of it.
So, after at least 50 attempts using Odin to try and flash a good recovery, re-root the phone, whatever I could think of, I finally got out of soft brick, and back to a working phone, yet still no google apps, and no recovery (or so I thought).
By this time, I had asked ....no. begged for help on 2 or 3 different threads to no avail when what I thought was a brain storm came to me.... I googled and located the google play store apk, and google play services apk and thought that if I could just get these 2 things installed, I would be able to log onto the google play store and download the apps I need and all would be right with the world....... Yeah.... Remember the cascade of errors thing I mentioned a few lines up ^^^ ?
Once I installed those 2 apk's and rebooted the phone, I was in nag screen hell with no way out, no custom recovery (remember...or so I thought) and no way to access ANYTHING on the phone because literally the second I hit "ok" on the nag screen, it would immediately pop back up...This "nag screen" was the one that pops up and tells you that "google play services has stopped working".. I came inches away from launching the phone against the wall and buying another one... something... anything but a Samsung GS4.
So here we are, 14 hours (of actual face in the phone, Odin, XDA, Google, YouTube) frantically searching for ANY solution.....and NOTHING presented itself, when I decided to take a step back and walk away from it for a couple of hours.......
The next thing I tried was pounding my way through the nag screen... Literally hitting the "ok" toggle to clear the screen, while instantly trying to hit any other button on the screen to get me into the settings menu, because during my little self imposed time out, I had an epiphany.... of sorts..... What really happened is that I remembered seeing a "factory reset" toggle in the settings menus somewhere.....and I was determined to find it........ SO....... 13,386,329 clicks of the "ok" button later, I managed to engage the factory reset switch at the exact right moment, followed by another 4,388 presses of the "ok" button to get to the "confirm" button.......... and like a beacon from heaven...... My phone rebooted, and factory reset, and the #%g^7**&^|@# nag screen was GONE !!!!! Oh my GOD it was GONE !!!!!!! After recovering from my full blown conniption, catching my breath and feeling like a raver must feel after a good night of Molly and glow stick euphoria, I had a working phone again..... almost.
What I did next was go immediately to Odin, re-root the phone, install a DIFFERENT rom, and the latest version of TWRP and like another beacon from the gods I had a wonderfully functional phone with all of the google apps I needed.... and all was good with the world........Pretty much....
I am nearly certain that I cost myself 5 years of healthy living with the stress I imposed upon myself throughout this ordeal ---- The following are lessons learned. Hopefully they save you from madness...
(1) Do NOT use a USB hub to connect your phone to the computer. The phone MUST be connected directly to a USB port on your machine.
(2) Understand the workings of the rom you are going to flash BEFORE you flash it.
(3) DO NOT PANIC
(4) DO NOT randomly install apk's just because you think you are smarter than a 5th grader, and you are so mad your phone doesn't work, you are going to try anything regardless of how retarded it might be.
LAST BUT NOT LEAST and actually probably the MOST IMPORTANT thing to do is locate, download and CONFIRM GOOD a stock firmware for YOUR phone BEFORE YOU ROOT or flash a new rom..... If you get to brick he11 like I did, you will spend more time searching for the tools to get back to zero than you can imagine. You will be revved up, angry with the world, and your google fu will fail you......miserably I might add......
Get all of your ducks in a row BEFORE you root, and before you flash a new rom. That means finding the stock firmware and opening it up in Odin with your phone connected to CONFIRM you have a good firmware to go back to should you fail miserably.... Your very sanity could depend on it...
Team Scream said:
Does anyone have and is willing to share a stock Galaxy S4 rom so I can go back to stock on my phone? I am currently soft bricked and completely dead in the water...
I need to be able to flash the rom using Odin since that is the ONLY way I can communicate with this phone right now....I can flash whatever recovery I want using Odin, but I cannot boot into that recovery once successfully flashed with Odin. It boot loops and goes back to the completely useless PacMan 5.02 rom I flashed previously that repeatedly shows the "google play services has stopped working" screen.... and no number of attempts to clear it by hitting ok will get me to a working desktop
I bricked my phone by flashing PacMan and forgetting to flash GAPPS before rebooting, then trying to install google play services apk and google play store apk manually because I could not get back into recovery for whatever reason....
I have spent the ENTIRE day searching for a stock rom that I can flash with Odin so I can at least get back to zero with this S4 which is actually a brand new phone for me....
PLEASE do not link me to mediafire or rapidgator downloads because I have tried every one of those that google will reveal.. I need one that YOU know is good, and will work. NONE.... NOT ONE of the files I have been able to find online are legitimate .tar files... They ALL unzip with errors and I have tried them on multiple computers.....Multiple download attempts and NOTHING... I have literally been at this for 10 hours now and really need some love.
On a side note, if I can pull the stock rom from my wifes brand new S4 without screwing up her phone, PLEASE tell me how to do that. She literally picked up her brand new replacement S4 today...
Any help is genuinely appreciated... PLEASE.
Click to expand...
Click to collapse
http://www.rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy S4 (SPH-L720)/Stock ROMs
KennyG123 said:
http://www.rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy S4 (SPH-L720)/Stock ROMs
Click to expand...
Click to collapse
Man thank you! THANK YOU! I really appreciate it... I woke this morning to find this reply after leaving my computer running all night for another corrupted downloaded image file.... I have my fingers crossed !!! THANK YOU
P.S. how do I know which one of those files I actually need? I have no idea what the difference is in each of those folders.... Forgive me for noob but I really am pretty noob at this.....
I just looked at the link to help you and noticed that Wilco stops at the NAE baseband. A lot of phones are on the NG2 baseband and if you have a 720T, it could be even a different baseband. Go to settings, "About Phone". Look for" "Baseband" and "Model Number". Write that information down. Once you have that, the last three characters are what is in the list in the link KennyG123 sent you. (For example, I have the original S4 so I have a SPH-L720 and my baseband is L720VPUFNG2 (or NG2 for short. Which was not on that list.) If it is not on the list, go to www.sammobile.com and search for your model number (For example, I am on the SPH-L720. If you just bought your phone from Sprint, you probably have the SPH-L720 or SPH-L720T). You can download the tar file from there. It is a little slow but it will get it done for you. The tar file for both phones are here in this forum if you want to search but going to Sammobile would probably be a little easier from the sounds of it.
dyandell said:
I just looked at the link to help you and noticed that Wilco stops at the NAE baseband. <snip>
Click to expand...
Click to collapse
Hey brother, thank you so much for the help and reply. I might have forgot to mention that I cannot get into the phone to read the model # or get any information from it at all. The nag screen telling me that google play services has stopped working is so persistent that I can't do anything with the phone once it boots.
Is there a way to brute force wipe the phone so that the only thing left when that process is done is a custom recovery like TWRP or Philz or anything other than stock?
If so, would you be so kind as to point me in the direction of a tutorial that would help me get through that process.... I am either not using the right search terms or I am just too old to be good at this and should have stayed home when the rooting lessons were being handed out...
Anyway, I genuinely appreciate your help... Thank you so much !!
Ok I was able to pound my way through the nag screen to the settings menu and eventually got to the baseband and model #
baseband: L720TVPUBOA3
model #: SPH-L720
I have tried 3 times to download the only version I can find on the sammobile.com website using the baseband to search and the file fails to download after getting about 2/3 complete.... I have tried it on 2 separate computers from 2 different locations now...... This is horrifying ...... Every single force that can be working against me, is working against me.
Ugh...... If you have a link to a method I can use to force wipe the phone without a stock rom, but with a recovery I can boot into to flash a rom I have on my external SD card, I would love to see it...... im losing my mind here...
<<<<<<<< EDIT>>>>>>>>>
I was also able to pound my way into the settings menu and do a factory reset which removed the google play nag. From there I was able to root around in the developer options folder where I discovered that in order to be able to boot into recovery, you need to select the "boot options" tab and allow the device to boot into recovery....
I know this device is old now and most people have moved on, and I am pleased that there are some people who stick around here to keep this device alive. I only wish that someone would have advised me to check the boot options selection when I indicated I could not boot into recovery... That would have saved me 2 days of manic obsessive he11....... This was complete he11...... But I am on the other side of it now, and have reflashed another rom... I am back among the living.
Team Scream said:
Ok I was able to pound my way through the nag screen to the settings menu and eventually got to the baseband and model #
baseband: L720TVPUBOA3
model #: SPH-L720
I have tried 3 times to download the only version I can find on the sammobile.com website using the baseband to search and the file fails to download after getting about 2/3 complete.... I have tried it on 2 separate computers from 2 different locations now...... This is horrifying ...... Every single force that can be working against me, is working against me.
Ugh...... If you have a link to a method I can use to force wipe the phone without a stock rom, but with a recovery I can boot into to flash a rom I have on my external SD card, I would love to see it...... im losing my mind here...
Click to expand...
Click to collapse
Sprint phones have always been able to downgrade and thinking that has not changed. You should be able to Odin the last one listed on the link I gave you...NAE...then your phone should boot...you can then take the Sprint OTA if you like then root and recovery as normal. Then you can get to the stuff on your SD and flash. The only issues I remember popping up these days is if you mismatch the modem and OS...which wouldn't be the case if you Odin'd NAE.
Team Scream said:
Ok I was able to pound my way through the nag screen to the settings menu and eventually got to the baseband and model #
baseband: L720TVPUBOA3
model #: SPH-L720
I have tried 3 times to download the only version I can find on the sammobile.com website using the baseband to search and the file fails to download after getting about 2/3 complete.... I have tried it on 2 separate computers from 2 different locations now...... This is horrifying ...... Every single force that can be working against me, is working against me.
Ugh...... If you have a link to a method I can use to force wipe the phone without a stock rom, but with a recovery I can boot into to flash a rom I have on my external SD card, I would love to see it...... im losing my mind here...
<<<<<<<< EDIT>>>>>>>>>
I was also able to pound my way into the settings menu and do a factory reset which removed the google play nag. From there I was able to root around in the developer options folder where I discovered that in order to be able to boot into recovery, you need to select the "boot options" tab and allow the device to boot into recovery....
I know this device is old now and most people have moved on, and I am pleased that there are some people who stick around here to keep this device alive. I only wish that someone would have advised me to check the boot options selection when I indicated I could not boot into recovery... That would have saved me 2 days of manic obsessive he11....... This was complete he11...... But I am on the other side of it now, and have reflashed another rom... I am back among the living.
Click to expand...
Click to collapse
Glad you got it fixed! I have had my phone for over a year now and never heard of a boot options tab. I guess you learn something new every day.
Also glad you got it fixed. But let's keep this open in case someone else has the same or similar issue.
KennyG123 said:
Sprint phones have always been able to downgrade and thinking that has not changed. You should be able to Odin the last one listed on the link I gave you...NAE...then your phone should boot...you can then take the Sprint OTA if you like then root and recovery as normal. Then you can get to the stuff on your SD and flash. The only issues I remember popping up these days is if you mismatch the modem and OS...which wouldn't be the case if you Odin'd NAE.
Click to expand...
Click to collapse
Well not being able to leave well enough alone, I locked my phone up again.
Because I was able to get out of soft brick without needing a stock firmware, I never bothered downloading NAE from the link you provided.
Turns out after 2 separate downloads (one using Chrome and one using Firefox) I have determined that the md5.tar files on that site http://www.rwilco12.com/downloads.php?dir=Files/Devices/Samsung%20Galaxy%20S4%20%28SPH-L720%29/Stock%20ROMs are worthless.... BOTH downloads failed in Odin before I could even get out of the gate....
They failed the md5 check that Odin performs and would not allow me to continue.... IS there something I am missing?
Team Scream said:
Well not being able to leave well enough alone, I locked my phone up again.
Because I was able to get out of soft brick without needing a stock firmware, I never bothered downloading NAE from the link you provided.
Turns out after 2 separate downloads (one using Chrome and one using Firefox) I have determined that the md5.tar files on that site http://www.rwilco12.com/downloads.php?dir=Files/Devices/Samsung%20Galaxy%20S4%20%28SPH-L720%29/Stock%20ROMs are worthless.... BOTH downloads failed in Odin before I could even get out of the gate....
They failed the md5 check that Odin performs and would not allow me to continue.... IS there something I am missing?
Click to expand...
Click to collapse
Remove the .md5 extension at the end and try again.
KennyG123 said:
Remove the .md5 extension at the end and try again.
Click to expand...
Click to collapse
Sweet baby Jeezes please tell me that is not all I had to do.... I spent 4 hours staring at the screen downloading files last night .... I waited 4 hours and finally could not stay awake any more but I finally got the OA3 firmware from SamMobile downloaded successfully. I left the .md5 extension and it is now flashing via Odin as I type this.... I could have saved myself a few more hours of misery if I had known you can remove the .md5 extension..... This learning curve is hard on an old man like me hahaha!
Thanks Kenny
<edit> Ahhhhh.... the sweet smell of success !!! I am now booted back into a stock phone!!!
Man I hope this thread can help save someone else from the anguish I have put myself through with this thing....
Team Scream said:
Sweet baby Jeezes please tell me that is not all I had to do.... I spent 4 hours staring at the screen downloading files last night .... I waited 4 hours and finally could not stay awake any more but I finally got the OA3 firmware from SamMobile downloaded successfully. I left the .md5 extension and it is now flashing via Odin as I type this.... I could have saved myself a few more hours of misery if I had known you can remove the .md5 extension..... This learning curve is hard on an old man like me hahaha!
Thanks Kenny
<edit> Ahhhhh.... the sweet smell of success !!! I am now booted back into a stock phone!!!
Man I hope this thread can help save someone else from the anguish I have put myself through with this thing....
Click to expand...
Click to collapse
I am sure it will! Glad you got it working and glad I helped! Some versions of Odin don't care about the md5 extension and others barf it up. With the way your luck went....well...don't buy a lottery ticket this week...hahaha.

Another noob to the slaughter... Softbricked my i9505. Any advice?

Note: Moved thread
Hey guys,
Sorry to be one of those d**ks who registers and first post is asking for help >_<
Take a seat and join me on this epic quest of failure, which has been my life for the last 12 hours.
Had this phone since release, over the years it has got more and more bogged-down with crap, even from the word go it had tonnes of bloatware installed, but I always avoided the temptation to root, just because I didn't want the hassle if something went wrong... lol.
Yesterday decided to finally take the plunge and root it, whatstheworstthatcouldhappen.jpeg
Here's how it went down....
1. Kingoroot via PC (first tried the apk but it wouldn't work).
2. Hated all the additional stuff that had been added to the phone (new wakeup screen with ads etc)
3. Used a guide to remove and replace kingoroot (kinguser, kingroot, kingmaster) with superuser. zidroid dot com/how-to-get-ride-and-replace-kinguser-with-supersu-app/ <<Here's the guide
4. Stuck on "Installing, please wait" (just after step 8 in the guide)... as the guide explains, if this happens then reboot. So I did...
5. Phone now won't get past the samsung logo (I die a little inside).
6. Google crap for a few hours (Boot into recovery mode etc) I clear cache, remove data.
7. Try loading a stock rom I downloaded and opening it from the sd card... no joy
8. Try Kies... no joy
9. Try Odin... no joy
10. During all of this frantic messing around I loose the option of booting into recovery mode, now I can only get to download mode.
11. Basically spent about 6 hours last night and a few hours this morning trying to get this fixed from all info I could find online... STILL NO JOY.
So now I'm biting the bullet and having to own up to the public, that's you guys.
Anyone here got a clue as to what may have gone wrong/what I can do to resolve this?
Not even fussed about keeping the phone stock, just need it running something!
As I'm sure you can tell I'm new to messing around with android, but I'm not entirely tech-naive so hopefully with some help I might be able to get this back to more than just a paperweight?
Cheers!
Altum said:
Note: Moved thread
Hey guys,
Sorry to be one of those d**ks who registers and first post is asking for help >_<
Take a seat and join me on this epic quest of failure, which has been my life for the last 12 hours.
Had this phone since release, over the years it has got more and more bogged-down with crap, even from the word go it had tonnes of bloatware installed, but I always avoided the temptation to root, just because I didn't want the hassle if something went wrong... lol.
Yesterday decided to finally take the plunge and root it, whatstheworstthatcouldhappen.jpeg
Here's how it went down....
1. Kingoroot via PC (first tried the apk but it wouldn't work).
2. Hated all the additional stuff that had been added to the phone (new wakeup screen with ads etc)
3. Used a guide to remove and replace kingoroot (kinguser, kingroot, kingmaster) with superuser. zidroid dot com/how-to-get-ride-and-replace-kinguser-with-supersu-app/ <<Here's the guide
4. Stuck on "Installing, please wait" (just after step 8 in the guide)... as the guide explains, if this happens then reboot. So I did...
5. Phone now won't get past the samsung logo (I die a little inside).
6. Google crap for a few hours (Boot into recovery mode etc) I clear cache, remove data.
7. Try loading a stock rom I downloaded and opening it from the sd card... no joy
8. Try Kies... no joy
9. Try Odin... no joy
10. During all of this frantic messing around I loose the option of booting into recovery mode, now I can only get to download mode.
11. Basically spent about 6 hours last night and a few hours this morning trying to get this fixed from all info I could find online... STILL NO JOY.
So now I'm biting the bullet and having to own up to the public, that's you guys.
Anyone here got a clue as to what may have gone wrong/what I can do to resolve this?
Not even fussed about keeping the phone stock, just need it running something!
As I'm sure you can tell I'm new to messing around with android, but I'm not entirely tech-naive so hopefully with some help I might be able to get this back to more than just a paperweight?
Cheers!
Click to expand...
Click to collapse
Your mistake was using Kingroot.
Use CF-Auto-Root next time.
And what does "Try Odin... No joy" mean?
Did it fail or did it successfully flash and still didn't boot?
The procedure to flash with Odin is something like:
Download a stock ROM (should have the .tar extension)
Get a good USB cable (preferably the original one) and connect it to a back USB port (any other ports can cause problems) and to the phone.
If flashing fails, try a gain.
You could have avoided this had you just downloaded the correct cf-auto root file and flashed it via Odin..

Categories

Resources