I bought a 32gb SanDisk Cruzer Fit to store my music library on, and it worked initially with USBOTG and stickmount. However, it no longer works with Nexus 7, all other memory sticks are fine, and the SanDisk works on my PC, but not the Nexus 7. Anyway, I plugged it into a USB hub and it works again, but only through the USB hub. Anyone else noticed this kind of behavior? I'm guessing it's related to power draw, as the hub is mains powered, but I'm surprised it can't cope with a flash drive. I'm now wondering whether to buy another device, or whether the same thing will happen.
I had the something similar and a reboot fixed the issue for me. I tried plugging in my 250GB WD Passport but I guess there wasn't enough power for the external drive because it kinda just sat and clicked. I then tried plugging in my 16GB thumb drive that I know worked the day before but now matter what I did, I could not get it to mount through StickMount. I rebooted the Nexus7 and I was then able to use my thumb drive again. Not exactly the same but try a reboot if you haven't already.
I also have that problem with my Buffalo USB hard drive, where it sits and clicks, it's OK via the hub, but not direct. A reboot doesn't make any difference. I'm wondering if it's my USBOTG cable, as that's the only variable, I have read that others have got the SanDisk 32gb to work with the Nexus 7. I'll try another cable...
Got my new USBOTG cable, and the Sandisk 32gb now works. My external HDD still doesn't work (unless plugged into hub), but that's not too surprising. The new cable is this:-
Afunta(tm) USB 2.0 A Female to Micro B Male Adapter Cable (search on amazon.co.uk)
The old one works with most of my USB sticks, but is maybe not as solid in terms of build quality, as the new one is much tighter. The old cable is this:-
Brand New Micro USB Host Mode OTG Cable Flash Drive SD T-Flash Card Adapter FOR Samsung GT-i9100 i9100 Galaxy S II 2 GT-N7000 Galaxy Note (search on amazon.co.uk)
Related
Hi people,
I read in a review that you can connect an external hard drive to the nexus 7 (the usb powered ones) via a USB Host Cable.
Could any of you tell me if this is correct or not? As i have an Archos 80 g9 and i know it cant do it off the micro usb only the USB 2.0 slot it has.
Thanks a lot for the help
Regards
Kurpter
Yes, it is possible but you may need to provide external power to the drive. Use a powered usb hub or something like that. The Nexus 7 most likely won't be able to output enough current to power a spinning drive.
Ah ok, so you are saying that you plug the usb host connection from the nexus to the usb hub and plug the hard drive in to another port on the hub?
I just want to know if this works as 16GB isnt much space when you want to take it on a trap to watch films.
cheers
you need to be rooted. my understanding is flash drives or micro sdcards are good to go, not sure an external hd will work unless powered as previous poster alluded
Sent from my ADR6400L using Tapatalk 2
Since N7's have been out for a few days, has anyone tried hooking up a portable hdd using a micro otg cable? I could plug my portable Toshiba hdd into my Acer A500 tablet without rooting and it would read the contents of the drive just fine. I would watch movies and view pictures as if it were an sd card. Wondered if the N7 unrooted could do the same?
ezzkmo said:
Since N7's have been out for a few days, has anyone tried hooking up a portable hdd using a micro otg cable? I could plug my portable Toshiba hdd into my Acer A500 tablet without rooting and it would read the contents of the drive just fine. I would watch movies and view pictures as if it were an sd card. Wondered if the N7 unrooted could do the same?
Click to expand...
Click to collapse
No it does not mount the external storage nor does it have an option to do so. You need to root and install chainfire's stickmount app for this to work.
clockcycle said:
No it does not mount the external storage nor does it have an option to do so. You need to root and install chainfire's stickmount app for this to work.
Click to expand...
Click to collapse
Yes, root and stickmount. Does anyone need me to test an external hard drive? I can if you guys want.
Sent from my Nexus 7 using xda premium
I use a Seagate Wireless Drive
kurpter said:
Hi people,
I read in a review that you can connect an external hard drive to the nexus 7 (the usb powered ones) via a USB Host Cable.
Could any of you tell me if this is correct or not? As i have an Archos 80 g9 and i know it cant do it off the micro usb only the USB 2.0 slot it has.
Thanks a lot for the help
Regards
Kurpter
Click to expand...
Click to collapse
Hi. I decided to use a wireless drive to store all of my music, movies and documents. So, I purchased the Seagate GoFlex Satellite Mobile Wireless Storage. You can use with Android or IOS devices. I love it.
Yes, its a no-go out-of-the box connecting to a USB thumb drive or a powered HD with a microUSB OTG cable. This doesn't really surprise me, though, because they would need to dynamically detect the device type and mount it on the system. What I haven't tried is a USB keyboard. Anybody do that?
wiithepeng said:
Yes, root and stickmount. Does anyone need me to test an external hard drive? I can if you guys want.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
yes could u test it out? i was thinking of buying a portable hard drive but not sure if it will have enough power to use it
does usb 3.0 work? or do i need to buy a usb 2.0
I've tested mine with an old 60GB WD Passport and a new 500GB Freecom XXS. Both are 2.5" USB powered external HDDs, and both worked fine.
chris100575 said:
I've tested mine with an old 60GB WD Passport and a new 500GB Freecom XXS. Both are 2.5" USB powered external HDDs, and both worked fine.
Click to expand...
Click to collapse
great thanks for the info. btw is the new one using usb 3.0 or 2.0? do u know if usb 3.0 will work?
I just plugged in a full-sized USB keyboard using my OTG cable and it works fine. I can touch type, use the cursor keys including ctrl+arrows to skip words, bring up menus with the context menu key just to the left of the right-hand ctrl key, etc, etc. I'm sure it must be using up my battery at a faster rate, though.
Edit: It's just occurred to me that there's a problem with using a USB keyboard to type when the N7 is in portrait mode: finding a stand to hold the tablet upright at the right angle when the USB-OTG cable is sticking out of the USB port at the bottom of the tablet.
Mind you, it's great being able to type at full speed without a soft keyboard hiding a large chunk of the screen.
--
Sent from my Nexus 7 using Tapatalk 2
garryknight said:
Edit: It's just occurred to me that there's a problem with using a USB keyboard to type when the N7 is in portrait mode: finding a stand to hold the tablet upright at the right angle when the USB-OTG cable is sticking out of the USB port at the bottom of the tablet.
Click to expand...
Click to collapse
You can get OTG cables with a right angled micro-USB plug on them, which might help your stand problem. I have one on its way as I was concerned about knocking/bending/snapping the straight plug when its sat on my lap in portrait mode.
Edit: It's just occurred to me that there's a problem with using a USB keyboard to type when the N7 is in portrait mode: finding a stand to hold the tablet upright at the right angle when the USB-OTG cable is sticking out of the USB port at the bottom of the tablet.
Click to expand...
Click to collapse
Or, just turn the tablet upside down so the cable is pointing up. The display will rotate appropriately.
I think but not sure that you'll want cm10 for the rotate from any angle thing...
chris100575 said:
I've tested mine with an old 60GB WD Passport and a new 500GB Freecom XXS. Both are 2.5" USB powered external HDDs, and both worked fine.
Click to expand...
Click to collapse
how did you manage it ??did you use nexus media importer
Without a custom kernel, the external hdd won't work with Stickmount or NMI if it is formatted NTFS. I haven't actually used NMI, but others have posted about the NTFS issue.
So I bought one of those cheap (sub $1) OTG adapters from Amazon, and up until today it worked. I was able to import photos from my digital camera and use a USB mouse. Today I can't get it to work at all. Not the mouse, not the camera, not anything else.
Regular USB (charging and PTP mode, I would have tested MTP as well, but it's not compatable with my laptop) works fine. I'm able to transfer files to and from the tablet, and it charges fine.
Is something wrong with the OTG cable or my tablet? Will I have to buy a new OTG cable to test?
If its only <$1 just get another one or two! Sounds like a cable problem if everything else is working
Christmas is coming, I see the shadows of Ebeneezer Scrooge !!
Are you using stick mount to load the OTG onto the N10? If so thats probably why. When i first installed my stickmount it worked but wouldn't see any of the files on the USB drive. Now after i've unlocked and rooted the device it won't even show the usb drive attached. I switched to Nexus media importer and it works fine, but i believe stickmount is having issues with 4.2.
However if the OTG cables did cost you less than a buck replacing them may be the solution too.
Hi,
Is it possible to mount an 2.5" HDD without an external power source?
I would like to buy an Western Digital HD Elements SE 1TB 2.5 USB 3.0 but I do not know whether it is working with my Nexus 7 or not...
A usb stick (with an usb OTG) is working but a real hdd needs a lot more power.
And a self powered hdd (with wifi) is not an solution for me.
Thanks in advance!
Xdii said:
Hi,
Is it possible to mount an 2.5" HDD without an external power source?
I would like to buy an Western Digital HD Elements SE 1TB 2.5 USB 3.0 but I do not know whether it is working with my Nexus 7 or not...
A usb stick (with an usb OTG) is working but a real hdd needs a lot more power.
And a self powered hdd (with wifi) is not an solution for me.
Thanks in advance!
Click to expand...
Click to collapse
It depends. I had to splice 5 volts of power into the usb cable of my older usb 2.0 ext hdd to get it to spin up and mount, but some others I know say they dont need ext power on their newer usb 3.0 ext hdds. But, I dont know if it is all usb 3.0 drives.
Sent from my Nexus 7 using xda premium
I have wd element 1TB usb 3 and it's work good with me nexus 7, while my old 180gb seagate cannot be mounted, it's led only light up for 3 second then just died.
Sent from my Nexus 7 using xda premium
Let's say, I buy a 2.5" hdd without external power source but I have no luck and it can't be mounted (not enough power). Is it possible to somehow plugin an external power source, so the hdd can spin up and mount?
ucubz said:
I have wd element 1TB usb 3 and it's work good with me nexus 7 [...]
Click to expand...
Click to collapse
That means, a usb OTG is wokring fine with usb 3.0? Usb 3.0 is compatible with usb 2.0, but I was a bit concerned that the usb 3.0 to usb 2.0 to micro usb 2.0 combination may cause problems.
I know I'm reviving a thread a bit here, but I have a WD Elements USB3 1TB drive and an OTG cable.
When I first got the drive and cable, it all mounted and worked great. It wasn't until I hooked it up to a PC for the first time to transfer stuff to it that I started getting issues.
Now, I can use it with the PC no worries, but it won't mount on my N7. It'll sometimes flash up that there's something, but then nothing. Is the format wrong? Should I go with making it ext4 rather than NTFS?
Been hunting for more info on it, and will continue to do so, just hoping that someone else has come across this and has a fix or some idea on what's going on.
Thanks
My guess: The Nexus 7 has not enough power to spin up and mount the drive. You have to use an powered hub (e.g. Y-cable with external power source).
Hey guys!
I have a Transcend StoreJet 500gb external HDD that I want to connect to my Nexus 7 (2012). Flash based usb sticks work fine, but this hard disk with the actual spinning platter doesn't. I found out that you need to "power the hard drive with a usb hub".
I don't have a usb hub, so I thought of this. Since my External HDD has a usb cable with two usb connectors, can I plug one of them into the Nexus 7 battery charger and the other one into my nexus 7 with a OTG cable?
Can I power it properly like that?
Or is it dangerous?
If I only connect it to my nexus 7 it makes beeping sounds and doesn't get detected. Not much power output on the Nexus 7....
Please help!
Thanks in advance.
You need a powered USB hub, they aren't that expensive.
Sent from my Nexus 7(2012) that has zero issues.
SlowCobra96 said:
You need a powered USB hub, they aren't that expensive.
Sent from my Nexus 7(2012) that has zero issues.
Click to expand...
Click to collapse
Is there nothing else I can do?
Cost is not the issue, I just cant buy anything right now. :good:
compgenie said:
Hey guys!
Since my External HDD has a usb cable with two usb connectors, can I plug one of them into the Nexus 7 battery charger and the other one into my nexus 7 with a OTG cable?
Can I power it properly like that?
Or is it dangerous?
Click to expand...
Click to collapse
Yes you can do that, it is not dangerous. I power my external WD Passport HD by plugging one usb connector into the pc for power and the other into the OTG usb cable. My drive won't spin unless supplied with the additional power. I have also tried it by plugging the connector into an a/c adapter instead of the pc usb port, which also worked fine.
Groid said:
Yes you can do that, it is not dangerous. I power my external WD Passport HD by plugging one usb connector into the pc for power and the other into the OTG usb cable. My drive won't spin unless supplied with the additional power. I have also tried it by plugging the connector into an a/c adapter instead of the pc usb port, which also worked fine.
Click to expand...
Click to collapse
Connecting it to a/c adapter + tab worked! :good:
Thanks!
Ps: I tried that before too. Didn't work then. Now it worked. Weird.
Hi all,
I have a similar problem with my N7 attaching a small USB powered HDD to watch HD movies stored on that drive. Thing is, when I attach the HDD on my USB OTG cable, all i hear is a repeated "clack..clack" and nothing happens, the HDD doesn´t start. So the other day I got my Nexus 5 and for fun I tried to use the SAME HDD with the same cable and same adapter on the N5 and it worked flawlessly! Starts up, Stickount mounts it and boom!
Now how can it be that one device can work with the HDD and one not? I´mm guessing it may be related to AC voltage levels, but shouldn´t the Nexus 7 be able to deliver the same or even more power to the HDD than the Nexus 5?I don´t get it....
Thanks,
Kusie
Ok guys. I've been messing around for some long time using 4.3 rom and my 2tb passport but with no luck reading (or writing from it). I was under impression that phone has to be rooted for reading only NTFS format but....this is fairy tales if you ask me. Recently I upgraded to latest kitekat available and rooted but still no access to my drive. I tried 3 usb sticks (8,16,64) with no problem using FAT format.
I used paragon, stickmount but nothing helped me to work this out. I'm also having second doubt would I have more luck with exFAT format?
Anyone had similar problems connecting 2tb drive to their Note 3? And disk is spinning I'm positive it has enough usb power.
The phone can only support up to 1tb due to power restriction.
The only way that i managed to get a WD 2Tb drive to work with my phone/tablet was to use a powerbank. The phone doesn't give enough power out to start the drive up.
You need :
- 1 powerbank (the bigger the better, as it will also charge your phone/tablet)
- 1 USB Hub + OTG cable (or an USB Hub that can be used as OTG with the phone)
- 1 male-to-male cable
- the phone
- the external HDD
Connect to the USB hub the HDD using the cable suplied with it, connect using the male-to-male cable the powerbank to the USB hub and then connect the USB hub to the phone using the OTG cable (or if you have an OTG cable with USB hub integrated then it's even better).
Now, the powerbank will give power to all devices connected to the USB hub (the HDD and the phone), so it should work OK.
After that you will need to solve the NTFS reading/writing, for that you should be able to use the app you already mentioned.
P.S. when i was playing on the Tab2 with the above configuration, I also had to put an usb stick in the USB hub. For some reason the tablet didn't detect the HDD on the hub unless there was an USB stick too (never understood why). I don't remember having the same problem with the Note3, but i didn't test extensively so your mileage may vary.
Edit : an example of OTG adapter with integrated USB hub for Note 3 : http://www.ebay.com/itm/Micro-USB3-...-TF-Samsung-Galaxy-Note-3-N9000-/171300593212
Thanks for reply verszipo I was looking at this cable, hoping this could power up the drive while phone continues to operate itself without additional power. So Is it possible to have power supplied directly over wall plug instead of power bank?
This USB hub seams like nice idea.
Theoretically connecting like you suggested should work even if I leave disk in NTFS format using tools I mentioned before?
elektroda said:
Thanks for reply verszipo I was looking at this cable, hoping this could power up the drive while phone continues to operate itself without additional power. So Is it possible to have power supplied directly over wall plug instead of power bank?
This USB hub seams like nice idea.
Theoretically connecting like you suggested should work even if I leave disk in NTFS format using tools I mentioned before?
Click to expand...
Click to collapse
If external hdd is larger than 1 TB,
Use usb "Y" cable to add external power source to connection.
Hey!
I use 1.5TB HDD with mu N3 and it is NTFS...
Why cant you use USB hub with external power supply (try to find out if it is 1A or 2A? bigger = better), and at phone install total commander with plugin USB plugin for Total Commander (no root requided!!)...
I use a 2tb wd passport. No need for external power source. I use paragon to read and write to ntfs partition. My drive gets detected within a few seconds but takes several minutes to mount the drive. Maybe you just need to wait. I know my drive is mounted when the My Files app launches by itself and shows the drive contents.
I received my Y cable hoping extra juice could solve my problems but I have no luck at all. No matter what I use I can't make my drive read. I don't have any options to choose.
Maybe I should format my drive using different allocation size unit, I never formated it and it's not 4 months old. Maybe my phone has some crappy cache leftovers so I should use cleaner? Hell I don't know what to do anymore. Usb sticks are working fine all the way.
Ok update on topic. I mange to make it work. I formated to NTFS with default allocation size, nothing special. Using paragon + total commander plugin + total commander. Works fine now WITHOUT additional power. Only downside is that mobile battery drains way too fast when you connect storage on it. It does not matter if I plug in additional supply to drive or not, draining is the same. Anyone noticed this and any workaround for this.
Thank you guys for suggestions.
I mounted my CN memory usb3.0 3tb drive with paragon in my rooted sm n9005
It mounted fine to a folder in my int SD, and i copied ober 20gb of data