Info is a courtesy of almighty Samsung-Updates.com
Here's all OTA files for GT-P5110
Enjoy!
you wish
good
and as installed
how do you flash this.
with odin or cwm ?
i got an error code 7 ??
how do you flash this file??
Got mine Ota this morning, not much different but the bookmarks widget has gone
Sent from my GT-P5110 using XDA Premium HD app
I think it's much better to go with the 4.0.4 version from the 5113. Everything is butter smooth and works fine. It has some added features and apps (including a 50GB gift for DropBox).
andy1120 said:
Got mine Ota this morning, not much different but the bookmarks widget has gone
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
r-l said:
how do you flash this.
with odin or cwm ?
i got an error code 7 ??
Click to expand...
Click to collapse
getting the same, has anyone solved this yet?
challengedavid, from what I know, OTA files must be flashed using stock recovery (not CWM or Odin). You should try that if you haven't (flash a full ROM with Odin first to get stock recovery then the OTA update).
doubt
phaserk1 said:
I think it's much better to go with the 4.0.4 version from the 5113. Everything is butter smooth and works fine. It has some added features and apps (including a 50GB gift for DropBox).
Click to expand...
Click to collapse
and how you installed it? wich stock files you choose?
I have the same problem with ota updating .. any new how to do this ?
phaserk1 said:
challengedavid, from what I know, OTA files must be flashed using stock recovery (not CWM or Odin). You should try that if you haven't (flash a full ROM with Odin first to get stock recovery then the OTA update).
Click to expand...
Click to collapse
hi, thanks for that,
i updated via connected to pc, it worked fine then, does not like OTA
abbadon7 said:
and how you installed it? wich stock files you choose?
Click to expand...
Click to collapse
I used Odin to flash the P5113UEBLH1 4.0.4 ROM from sammobile. At first it was stuck on Samsung logo (probably because I had CM 10 and AOKP before), but I went to recovery and did a wipe data/factory reset and loaded fine after that. Then I rooted successfully using this guide.
Thanks
phaserk1 said:
I used Odin to flash the P5113UEBLH1 4.0.4 ROM from sammobile. At first it was stuck on Samsung logo (probably because I had CM 10 and AOKP before), but I went to recovery and did a wipe data/factory reset and loaded fine after that. Then I rooted successfully using this guide.
Click to expand...
Click to collapse
Thanks, i'll try later, since by the time i samfirmware files are damaged down.
I'm italian.. i have installed on my tab cm10. Now how i can return to stock and upgrade to 4.0.4 ? help me
Hi guys, I just flashed the OTA package I found on sammobile thanks to your help cause I couldn't wait for th official OTA to reach me
I was and am completely stock, so I downloaded the italian 4.0.4 OTA package on my notebook, then transferred it to the internal storage of my tab 2 10.1 5110 and rebooted into (stock) recovery by shutting down the device and booting it holding power and vol down buttons.
The upgrade process went smooth and after something like 10 minutes the tab rebooted showing some new graphics.
What I noticed during these few minutes with the new update (build IMM76D.P5110XXBLH4) is the new keyboard (it seems the same the new galaxy note has...), the lack of the favorites widget, new sounds when tapping the screen and this new fresh graphic all around the UI (lockscreen, internet browser, settings etc.).
One strange thing: kies does not recognize the firmware now and it says that the device is not updatable...
EDIT: the favorites widget is there, it's just different from the previous and more customizable
50Gb dropBox!
phaserk1 said:
I think it's much better to go with the 4.0.4 version from the 5113. Everything is butter smooth and works fine. It has some added features and apps (including a 50GB gift for DropBox).
Click to expand...
Click to collapse
I purchased mine P5100 few days back, I am on 4.0.3 and dont have any upgrade of DropBox, Do you know how to get 50Gb?
thanks in advance
The stock ROM for P5113 comes with DropBox preinstalled. Once you login into your accoutn it gives you the 50GB bonus. I did this on my P5110, but I don't know any solution for P5100...
Hello everyone! I have a question to ask.
On September 4, was released on SAMMOBILE, SWISS(switzerland) version 4.0.4 for GALAXY TAB P5110 2 10.1 P5110XXBLH4 that requires firmware P5110XWALD2 (downloadable from XDA) ... so my question is should I not solve every problem? That is, I explain you, I installed cyano10 but I did not like .. I decided to go back to the stock firmware but I did not find the Italian version on the web ... so I was advised by a guide on this forum to install the latest version of the tablet P5113 because between those two terminals only changes that the P5113 has the infrared. Then I ask me for a 100% stock firmware on Kies recognized with P5110, should I install the P5110XWALD2 and then update with version 4.0.4 P5110XXBLH4?
Is a better upgrade to the Swiss version P5110XXBLH4 or the latest version of Luxembourg P5110XXBLI1.
Let me know as soon as possible thanks!
Related
I am getting tired of waiting for the stock 3.1 rom now so I am starting to think about using one of the custom roms.
Have there been any performance and function comparisons between the stock rom and the custom roms?
Or do you have any good arguments either way?
The two most popular appear to be Virtuous Picasso and Virtuous Galaxy. I have been using the 1.08 version of the former for sometime and have had no issues. I thether, have gps, bluetooth, WiFi all w/out issue. If your rooted, get wild and flash them both; see which you Luke better.
I like virtuous galaxy for the the touchwiz, but there were too many broken things. Exchange didn't work, couldn't access files on my external sd card (although apps like google music seemed to be able to) and my usb keyboard didn't work. Virtuous galaxy seems to work without any issues.
I've tried them all so far, and they all have pro's and con's. They also all have bugs, which is only to be expected.
Currently, I'm running stock and, to be honest, kinda prefer it. Though I *have* rooted and added a few tweaks...
willyampz said:
I like virtuous galaxy for the the touchwiz, but there were too many broken things. Exchange didn't work, couldn't access files on my external sd card (although apps like google music seemed to be able to) and my usb keyboard didn't work. Virtuous galaxy seems to work without any issues.
Click to expand...
Click to collapse
You started off saying virtuous galaxy had too many broken things, then went on to say virtuous galaxy seems to work without issues? Maybe it's too early and I'm reading it wrong in my barely awake state, but could you clarify please? Lol
vanisleguy1976 said:
You started off saying virtuous galaxy had too many broken things, then went on to say virtuous galaxy seems to work without issues? Maybe it's too early and I'm reading it wrong in my barely awake state, but could you clarify please? Lol
Click to expand...
Click to collapse
I don't mean to speak for willy but I think what he was saying is that at first, Virtuous Galaxy was nice but had too many broken features but after the release this past weekend, most of the bugs are fixed.
I am using Primee which is the Asus Transformer ROM with some of the Acer items left intact. I have tried Virtuous Galaxy and UI is beautiful but I was getting a barely perceptible lag opening and closing the app drawer even after OC to 1500 and it was bugging me. I think the problem could have been one of the Samsung widgets.
I normally recommend loading a custom rom if you feel comfortable. I rooted my HTC Magic back in the early days of Android and have never looked back.
wahlis said:
I am getting tired of waiting for the stock 3.1 rom now so I am starting to think about using one of the custom roms.
Have there been any performance and function comparisons between the stock rom and the custom roms?
Or do you have any good arguments either way?
Click to expand...
Click to collapse
You should go for 3.1 stock (official acer update), works like butter and fixes problems that custom roms still have (like cell stanby) unless they are based on 3.1 stock (I'm still waiting )
Update to 3.1 stock Acer Official Update
No wipe needed or acer recovery/cwm, you don't lose your data, but it's highly recommended to backup and use recovery/cwm, through again not necesary.
Here is a change log (what's new/changed) to see if it's worth, if you do update please share with me in that thread what's new and changed so we can inform, share and encourage pleople to update to 3.1, plus if you do it now you get new OTA Acer_ A500_4.010.30_COM_GEN1 (I sound like a salesman ) who knows for how long they will keep the update
Justray said:
You should go for 3.1 stock (official acer update), works like butter and fixes problems that custom roms still have (like cell stanby) unless they are based on 3.1 stock (I'm still waiting )
Update to 3.1 stock Acer Official Update
No wipe needed or acer recovery/cwm, you don't lose your data, but it's highly recommended to backup and use recovery/cwm, through again not necesary.
Here is a change log (what's new/changed) to see if it's worth, if you do update please share with me in that thread what's new and changed so we can inform, share and encourage pleople to update to 3.1, plus if you do it now you get new OTA Acer_ A500_4.010.30_COM_GEN1 (I sound like a salesman ) who knows for how long they will keep the update
Click to expand...
Click to collapse
My question is,after read almost all pages of the threads about this;does this go for all devices?I have a emea_gen3..sorry if i'm being a Noob now.
Sent from my A500 using Tapatalk
Thanks for all the advice. I think I'll wait a while longer for the stock now. It doesn't sound like the custom roms are the kind of miracle upgrades I got to my Hero and Desire phones yet.
Sent from my A500 using Tapatalk
booze78 said:
My question is,after read almost all pages of the threads about this;does this go for all devices?I have a emea_gen3..sorry if i'm being a Noob now.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
Yes it works, I went from EMEA_GEN3 to COM_GEN1, everything works fine, updated from .22 to .30 from OTA.
wahlis said:
Thanks for all the advice. I think I'll wait a while longer for the stock now. It doesn't sound like the custom roms are the kind of miracle upgrades I got to my Hero and Desire phones yet.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
Actually the update posted IS official, Acer one, right now those with that version are getting OTA .30 update, so as far as I know that's stock unless you mean out-of-the-box as stock.
i meant to say virtuous picasso seems to work without issues and tried to edit it after.
Justray said:
Yes it works, I went from EMEA_GEN3 to COM_GEN1, everything works fine, updated from .22 to .30 from OTA.
Actually the update posted IS official, Acer one, right now those with that version are getting OTA .30 update, so as far as I know that's stock unless you mean out-of-the-box as stock.
Click to expand...
Click to collapse
Yessss,it worked.Lost root only..
Sent from my A500 using Tapatalk
booze78 said:
Yessss,it worked.Lost root only..
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
and you can re-root
Please post here anything new you find, new issues, fixed issues, software and experience related please
Just don't forget to back up!
@Justray, you say : "Yes it works, I went from EMEA_GEN3 to COM_GEN1, everything works fine, updated from .22 to .30 from OTA."
How do you procede to go from EMEA_GEN3 to COM_GEN1?
My machine is COM_GEN1 so I'm happy. My sister who got hers in Denmark is EMEA_GEN3 and is still stuck with firmware 1.x (Android 3.0.1)... Is there a step-by-step instructions for going to COM_GEN1 for her machine?
I suspect I can then download the latest firmware manually from : code.google.com/p/acer-a500/downloads/list or use OTA like my machine?
Thanks,
Gilles.
ggravier said:
@Justray, you say : "Yes it works, I went from EMEA_GEN3 to COM_GEN1, everything works fine, updated from .22 to .30 from OTA."
How do you procede to go from EMEA_GEN3 to COM_GEN1?
My machine is COM_GEN1 so I'm happy. My sister who got hers in Denmark is EMEA_GEN3 and is still stuck with firmware 1.x (Android 3.0.1)... Is there a step-by-step instructions for going to COM_GEN1 for her machine?
Click to expand...
Click to collapse
I too went from EMEA_GEN3 to COM_GEN1. Here is the basic low-down as to how I went about it:
* Install Acer Recovery from Market and use it to install clockworkmod.
* Download the COM_GEN1 ROM from http://forum.xda-developers.com/showthread.php?t=1176632 thread.
* Use Acer ROM Decrypter to decrypt the .zip file and extract the update.zip from there.
* Rename the update.zip to something like e.g. AcerROMcomgen1.zip and copy it on your SD card. It's important that it is on the SD, not internal storage.
* Turn off your tablet, then turn it on while keeping the volume button pressed down until you see white text appear on the tablet screen's top-left corner.
* Use clockwordmod to first make a full backup for just-in-case. I really mean it: do a full backup. You never know if you might need it later!
* Then format cache, format data/factory reset, then install zip from SD.
* Reboot.
As for navigating in clockwordmod: you use the volume button to go up or down in menus, and power button to select the menu item.
HC 3.2 P7310 P7310XAR P7310UEKJ5
Here is a stock 3.2 ROM for P7310 (WiFi) that I built from a system.img and boot.img from P7310XXKJ4(thanks nirogu325!). This is good for folks that like stock and can't flash with ODIN and for ROM bases\components etc.
CWM Recovery flashable (system and stock kernel included)
Install wipe caches, dalvik cache, and replaces the system partition. It will not touch /data unless you do so in CWM (see install below).
Deodexed
Zipaligned
Rooted + busybox
Removed the plethora of annoying widgets from the home screens that came from the factory.
Removed some DOA 0 byte APKs (AndroidTabletGNA_v1.apk, BoxAndroidApp.apk, WeatherBugTablet.apk, and SamsungHelpCenter_P7310_v001.apk)
Works great with my v2 kernel for HC 3.2 If you had my kernel already, you need to reflash it after flashing this zip since it contains the stock kernel.
Note: This ROM is deodexed. It will boot slow the first time and apps will load slower the first time you use them. It will then get faster, so give it a chance.
MD5 36bf2f8659b6f8087bdbf31ba370fe87
StockHC32_P7310XARP7310UEKJ5.zip
Backup:
Backup your existing ROM with CWM first.
Install Fresh:
Wipe data\factory reset from CWM recovery and flash the zip. When it boots, it will start the setup wizard like you just bought it.
Upgrade:
If you have stock 3.2 KJ4, you may be able to get way with just a flash without wiping data. It seems to be working OK for me. If you have any issues, I recommend installing fresh. This worked great for me as well.
As-is...I will provide no support for this stock ROM.
Thanks a lot! Gonna flash this tomorrow (almost 12am here lol). Will let you know how your kernel goes on my tab this time (crossing fingers).
nirogu325 said:
Thanks a lot! Gonna flash this tomorrow (almost 12am here lol). Will let you know how your kernel goes on my tab this time (crossing fingers).
Click to expand...
Click to collapse
want ro try it but what to install in order to backup my original rom? root follow by cwm willso?
mynewuser said:
want ro try it but what to install in order to backup my original rom? root follow by cwm willso?
Click to expand...
Click to collapse
Overcome CWM Recovery - Nandroid Backup procedure: Go to the CWM Recovery > Nandroid menu > Backup or Restore. This ROM is already rooted if that was your last question.
Curious little typo Samsung made in the MTP Application, when you connect it says "MTP initialisation" instead of initialization. This is also present on the previous KJ4.
nirogu325 said:
Curious little typo Samsung made in the MTP Application, when you connect it says "MTP initialisation" instead of initialization. This is also present on the previous KJ4.
Click to expand...
Click to collapse
The UK guys are going to disagree
_motley said:
The UK guys are going to disagree
Click to expand...
Click to collapse
Lol yeah. It was with a "z" in KHA. So far this firmware's quicker than KHA. Got it OC'ed (with your kernel) up to 1.4 and UV'ed -75 only the higher freqs. All is well.
nirogu325 said:
Lol yeah. It was with a "z" in KHA. So far this firmware's quicker than KHA. Got it OC'ed (with your kernel) up to 1.4 and UV'ed -75 only the higher freqs. All is well.
Click to expand...
Click to collapse
Awesome, great to hear it is working for you!
Nvm. 10char
hi, do you know if this firmware samsung-updates.com/gt-p7310-galaxy-tab-8-9-wi-fi/ is the same as you have. .? second i have the firmware 3.1 P7310UEKHA do you know if i can flash this firmware or i wait for an ota update. .?
i ask because last time i had other tablet and i install another firmware from other region and i got and error of android process and i got infinite loop, please let me know
thanks
stsights said:
hi, do you know if this firmware samsung-updates.com/gt-p7310-galaxy-tab-8-9-wi-fi/ is the same as you have. .? second i have the firmware 3.1 P7310UEKHA do you know if i can flash this firmware or i wait for an ota update. .?
i ask because last time i had other tablet and i install another firmware from other region and i got and error of android process and i got infinite loop, please let me know
thanks
Click to expand...
Click to collapse
This firmware was leaked by samfirmware.com (soon to be sammobile.com). It is a stock ROM as the title says, but it is a leak (as in let's say a beta firmware), a stable one as I've had it installed since the 3rd of this month. If you'd rather wait for an OTA then you're welcome, it's all your choice. Be sure to follow instructions and you'll be fine with no bootloops. Don't be afraid to ask if help is needed.
So..XAR = EU and KHA=US I assume?
I think I read on overcome thread, saying there is no hardware difference between regions...just localized apps....which means ROMs are interchangeable?
Thanks for your time, guys!
Hey Motley!
Will there also be a 3G version of this rom? I'd like to install a stock android 3.2 rom to my 7300 but I don't find a version that is flashable with CWM recovery.
maturate said:
So..XAR = EU and KHA=US I assume?
I think I read on overcome thread, saying there is no hardware difference between regions...just localized apps....which means ROMs are interchangeable?
Thanks for your time, guys!
Click to expand...
Click to collapse
US region is XAB me thinks. Oh and it doesn't matter which region you choose since you can choose your preferred language at the startup wizard.
jenne1980 said:
Hey Motley!
Will there also be a 3G version of this rom? I'd like to install a stock android 3.2 rom to my 7300 but I don't find a version that is flashable with CWM recovery.
Click to expand...
Click to collapse
I posted a little ODIN guide in my latest post at the 7300 KJ5 thread.
jenne1980 said:
Hey Motley!
Will there also be a 3G version of this rom? I'd like to install a stock android 3.2 rom to my 7300 but I don't find a version that is flashable with CWM recovery.
Click to expand...
Click to collapse
Sorry, this is just a stock Wifi-only ROM that is prepped for CWM flashing. nirogu325 pointed you in the right direction for the equivalent stock ROM for the 7300 (3G), but you have to use ODIN to flash.
The 3G folks really need someone to do some CWM conversions for the stock 7300 ROMs so you don't have to use ODIN all the time. ODIN is great for low level recovery when all else fails, but it really sucks for day to day use as well as for avid ROM flashers since you have to re-root and re-install recovery etc. If you do go through all these things, at least make sure you do a CWM backup so you have a quick way to flash back to stock next time.
When you say stock do you mean no TouchWiz or stock as in just a rooted/deodexed version of the standard Samsung ROM? I'm looking for a plain Honeycomb 3.2 ROM. I'm downloading this anyway but if someone responds before it'll save me a bit of time Thanks!
d1gw33d said:
When you say stock do you mean no TouchWiz or stock as in just a rooted/deodexed version of the standard Samsung ROM? I'm looking for a plain Honeycomb 3.2 ROM. I'm downloading this anyway but if someone responds before it'll save me a bit of time Thanks!
Click to expand...
Click to collapse
There are no 8.9 ROMs that lack TouchWiz yet. If you want lag out, change launchers. I suggest ADWLauncher EX due to its new hardware acceleration functions in tablets.
Yeah I've been using ADW and its great. It's just a few little things with TouchWiz that I don't like... I want a stock (black) launcher bar on the bottom and black system menu & browser.
Overcome 1.2 Theme for KJ5
d1gw33d said:
Yeah I've been using ADW and its great. It's just a few little things with TouchWiz that I don't like... I want a stock (black) launcher bar on the bottom and black system menu & browser.
Click to expand...
Click to collapse
NOTE: I only have the 7310 (Wi-Fi) unit so this is not tested for the 7300 KJ5.
I can help you out with the bar and toggle menu, but not the browser and Settings, I'm afraid. Here's a CWM flashable I made with images from the old Overcome 1.2 ROM and a revert just in case.
Credit goes to alterbridge86 .
3.2 ROM issue with IMAP email client
Hey all,
I flashed this ROM and it works great with one exception. I use IMAP email which was working fine in 3.1 and works fine now with a 3rd party email client but with the mail app in this ROM all IMAP folders are empty. Sending emails through smtp okay but syncing IMAP results in only retrieving folders but all empty.
Any help or alternative is welcome, I don't want to go back but my only option is now POP or 3rd party IMAP app (which I don't like - they are all for lower phone resolution).
Thanks
I'm curious who is getting the update to PDA:LG2 / CSC:LG2(XAR) 4.0.4 by location and what issues are you seeing after this update.
For example "New York, WiFi issues and device type".
Thanks...
I checked for the update at 17:00pdt both via Kies and OTA and there was nothing. I just started the OTA upgrade at 18:51 Kies was still looping.. I was running stock LD3 as I wanted to try the changes. I've been running CM9 since it's release up to about two days ago.
Started OTA download at 18:51 finished download 19:08
Started upgrade at 19:08 finished at 19:17
Same excellent WiFi signal ( 40MHz / n only )
Tried to Odin CWM it did not work still have standard recovery.
Southern California
bark777 said:
I checked for the update at 17:00pdt both via Kies and OTA and there was nothing. I just started the OTA upgrade at 18:51 Kies was still looping.. I was running stock LD3 as I wanted to try the changes. I've been running CM9 since it's release up to about two days ago.
Started OTA download at 18:51 finished download 19:08
Started upgrade at 19:08 finished at 19:17
Same excellent WiFi signal ( 40MHz / n only )
Tried to Odin CWM it did not work still have standard recovery.
Southern California
Click to expand...
Click to collapse
Were you rooted??
No, I flashed stock Rom prior to this upgrade. Stock Rom, kernel, recovery and no root.
Texas, unrooted stock, P3113, no issues.
My biggest problem with my tab was the touch screen. This update has solved that problem entirely, the response is very good now. Now i just need root so I can use Titanium to debloat.
settings crash
after doing ota upgrade have app that cannot load settings with out crashing aps so far CHROME. when trying to open setings tab hangs then get standard error message
Picasosz said:
after doing ota upgrade have app that cannot load settings with out crashing aps so far CHROME. when trying to open setings tab hangs then get standard error message
Click to expand...
Click to collapse
This has happened with a number of users. Believe it's a bug with chrome
Sent from my GT-P5113 using XDA Premium HD app
After doing the upgrade, the system goes through a setup wizard to choose date/time etc...
At one point it asks to enter your first and last name. Where can you edit that as I recall I made a typo.
Sent from my GT-P3113 using xda premium
I got the update yesterday, Springfield, MO. Everything seems to be more smooth. The stock web browser looks better, the keyboard looks different. I like it, I haven't had any issues with anything so far.
Alarm fails
Picasosz said:
after doing ota upgrade have app that cannot load settings with out crashing aps so far CHROME. when trying to open setings tab hangs then get standard error message
Click to expand...
Click to collapse
After update to 4.0.4, the stock alarm app fails with "unfortunately the all has stopped working." Can not restart the app.
Running stock update came up on mine yesterday I am loving the new keyboard. I haven't really noticed much else. But I'm not really looking either
Sent from my GT-P3113 using Tapatalk 2
I got the OTA notice and it downloaded the files but it would not install, i guess due to the CWM, so I turned back and flash Stock ROM but now it wont upgrade either?
Use Odin on the 4.0.4 file located here, don't forget to unzip first:
http://samsung-updates.com/device/?id=GT-P3113
Then use odin to flash this CWM ( ueblg2_espressowifi_recovery.tar.md5 ):
http://rootzwiki.com/topic/25228-ho...-step-updated-052412/page__st__50#entry821932
finally use this to root and add busybox
http://rootzwiki.com/topic/24317-cwm-root-galaxy-tab-2/
looks like they pulled the file cant download it for the p3113 anyone share it?
never mind clicked the link its working again.
but it wont unzip.......
would anyone happen to have this update on mediafire or a file hosting site?.. i'm trying to download this but it says 2 days for the D/L to finish.. and i cant get it to download on torrent either.
Will be uploading a "Mirror" Of this in a little bit to MediaFire!
«Gîzmô»
Samsung Galaxy Tab 2: P3113
Firmware Version: P3113UEBLG2
OS: Ice Cream Sandwich (ICS) v4.0.4
Release Date: 4-7-2012
Build Date: 3-7-2012
Firmware:
http://www.mediafire.com/?379jdx8wxe75o3p
http://www.mediafire.com/?zybmucd99papb0q
http://www.mediafire.com/?a9wpi9satj2f27f
http://www.mediafire.com/?wqd7j7b9c7ige7q
Kernel:
http://www.mediafire.com/?2enhmhns1ssa1ha
«Gîzmô»
I posted a de odex rooted stock Rom in the dev section. Can flash thru recovery
Sent from my ADR6425LVW using xda premium
is there a way to change the shortcuts on the home screen?
GT-N5100 4.2.2 Official Update Released.
http://www.sammobile.com/2013/08/12...xy-note-8-0-3g-gt-n5100/#.Ugh9ElqeNck.twitter
Android 4.2.2 brings new features such as lockscreen widgets, dedicated toggles menu in status bar, improved task switching, Daydream screensaver mode, and performance enhancements. On the TouchWiz side of things, expect to see new widgets, homescreen, and more from the Galaxy S4.
You can grab the update both over-the-air (OTA) or via Kies. Here are the firmware details:
Model: GT-N5100
Country: Germany
Version: Android 4.2.2
Changelist: 1210063
Build date: Thu, 01 Aug 2013 12:27:55 +0000
Product Code: DBT
PDA: N5100XXCMH1
CSC: N5100OXACMH1
MODEM: N5100XXCMF4
EDIT: Just saw that someone had posted this in the Dev section. You guys really need to post this stuff in the correct forum.
To help keep this forum section tidy and easy to use, here are some rules and guidelines.
Only the following topics are allowed in the DEVELOPMENT area:
[DEV] - Development for any projects or Apps.
[ROM] - Custom ROMs.
[KERNEL] - Custom Kernels.
[MOD] - Hack & Modifications for the phone. (See below for more details)
[FIX] - Fixes for known issues & bugs.
[R&D] - Research & Development for Devs only, when gathering data for a new projects.Note: If you are unsure where your new topic should go, then please post it in General.
I saw that too, to bad I have 5110
Sent from my EVO using xda app-developers app
up to 4.2.2. could i root the note with GALAXY NOTE 8.0 TOOLKIT V1.1 ?
diephuy said:
up to 4.2.2. could i root the note with GALAXY NOTE 8.0 TOOLKIT V1.1 ?
Click to expand...
Click to collapse
CF-Autoroot works on N5120, so i guess it should work fine on N5100 also.
And if you are already on a rooted 4.1.2, just install Mobile Odin and flash new firmware with Everroot checked
Slipurson said:
CF-Autoroot works on N5120, so i guess it should work fine on N5100 also.
And if you are already on a rooted 4.1.2, just install Mobile Odin and flash new firmware with Everroot checked
Click to expand...
Click to collapse
Thanks. And i have another question, why is Mobile odin sure for root 4.2.2 N5100?
Anyone who already flashed it? does it fix the screen freeze issue?? and another question, If i flash it manually via odin, will it retain my installed apps?
Someone writes that what's inside CSC codes, please.
I know it's DBT (default), but there's more?
THX!
Flashed with mobile odin pro with everroot - failed, Got into bootloop on cwm with message "Failed to root". Finally , Restored backup . Back with 4.12.
dave18 said:
Flashed with mobile odin pro with everroot - failed, Got into bootloop on cwm with message "Failed to root". Finally , Restored backup . Back with 4.12.
Click to expand...
Click to collapse
hey. i just flashed and rooted 4.2.2. I used CF-Auto-Root http://forum.xda-developers.com/showthread.php?t=2291839. Just do exactly the instructions.
junjun10 said:
Anyone who already flashed it? does it fix the screen freeze issue?? and another question, If i flash it manually via odin, will it retain my installed apps?
Click to expand...
Click to collapse
I would like to ask the same thing, especially the screen freeze issue.
Flashed new ROM.
Am I only one who faces this issues?:
1. S Note became laggy when opening/closing note
2. S-pen pointer is shifted 1-2 mm down from true position (maybe if there is any calibration software?)
I can't download from hotfile, please mirror it
Sent from my GT-N5100 using Tapatalk 4
vpupkin said:
Flashed new ROM.
Am I only one who faces this issues?:
1. S Note became laggy when opening/closing note
2. S-pen pointer is shifted 1-2 mm down from true position (maybe if there is any calibration software?)
Click to expand...
Click to collapse
How did you flash it? CWM Recovery keeps giving me errors.
Majin101 said:
I saw that too, to bad I have 5110
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Just did something foolish, but after taking few precautions, did it anyways. I flashed system and kernel from this to n5110 with mobile Odin pro. Did not dare flashing cache (csc) and rest as mobile Odin needs stock recovery to flash cache and really wanted to keep custom for obvious reasons.
It booted and working fine except for chaton and messaging app crashing, which I disabled at root.
Plus side is that in conjunction with Google voice app and magic jack I can use phone dialler to make phonecalls now. On WiFi only off course.
***"""Still testing so strongly urge people not to try this unless they know what they're doing. "" "***
This will not work with n5120 system and kernel combination firmware. It does not boot. Although system by itself can be flashed successfully over earlier n5110 leak, but 5ghz WiFi bug from that leak remains.
If you don't clean your internal card properly before hand, the old files remain trapped and you only have access to new directory tree, so either move files to external beforehand or do a reset to free used space (did not reset myself and will try not to).
Sent from my GT-N5100 using Tapatalk 2
I'm waiting for a rooted version of this release.
nnik_1969 said:
I would like to ask the same thing, especially the screen freeze issue.
Click to expand...
Click to collapse
I see this mentioned once in a while but have never seen a screen freeze on any version firmware of my note 8.0.
Perhaps its a cpu thing. I usually install setcpu first thing on any rom after rooting.
Sent from my GT-N8013 using XDA Premium HD app
I had 4.1.2 rooted I flash 4.2.2 with mobile odin and all was ok apps root. ..
Sent from my GT-N5100 using xda premium
Co-NieTz said:
I can't download from hotfile, please mirror it
Sent from my GT-N5100 using Tapatalk 4
Click to expand...
Click to collapse
my mirror https://docs.google.com/file/d/0B-IWdElJelFWVi1QMDBNY1FyNm8/preview
kable said:
I see this mentioned once in a while but have never seen a screen freeze on any version firmware of my note 8.0.
Perhaps its a cpu thing. I usually install setcpu first thing on any rom after rooting.
Sent from my GT-N8013 using XDA Premium HD app
Click to expand...
Click to collapse
Perhaps it's a cpu thing but it's Samsung s job to fix it. I think it's an unexpected bug for a Note
godraxe said:
my mirror https://docs.google.com/file/d/0B-IWdElJelFWVi1QMDBNY1FyNm8/preview
Click to expand...
Click to collapse
can you remirror it please ?
This thread is for those who own the Galaxy Grand from the Philippines.
Mine has been updated to 4.2.2 XTC. So far these are my expwriences:
1. it has better memory management.
2. battery life is about the same as 4.1.2
3. google play now recognizes some games like subway surf as compatible.
Please comment if you are from the Philippines.
Nice one... a dedicated thread...
Same here Grand owner from the PH.
Still on stock.. waiting for the right FW for phone..and unrooted...
Will be rooting soon too...there are so many mods to try
FYI the firmware marked "XTC" on sammobile and samsung-updates.com are Vietnam CSC. I have not tried the other fw. I had to root then used csc chaner app to change to sun csc. It us not reallt of utmost importance but then it is good feeling to have the proper csc.
Phil firmware is bit laggy..even i reboot my phone
Sent from my GT-I9082 using xda premium
10xian04 said:
Phil firmware is bit laggy..even i reboot my phone
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
did you factory reset and wipe cache after updating? You lose data and settings but you start fresh in doing so.
Right there seems to be worst lag in XTC fw. Might get back to SER Russian rom or Gennxt SER. Indian fw also showing lags according to users.
Hi guys, from Davao here. Running the INU firmware, rooted and some apps frozen via Titanium Backup.
Hi kabayans!
I might make available/share for download the "rooted deodexed zipaligned" and cwm flashable XTC 4.2.2 I cooked using kitchen. I am reluctant to do so because I may not be able to support it. I am not a dev.
What do you all think!
muntinlupa said:
Hi kabayans!
I might make available/share for download the "rooted deodexed zipaligned" and cwm flashable XTC 4.2.2 I cooked using kitchen. I am reluctant to do so because I may not be able to support it. I am not a dev.
What do you all think!
Click to expand...
Click to collapse
lets give it a try @muntinlupa
go for it :good:
Still having problem with CSC unknown. Will update the file when I have time. It is booting ok . But I dont want to share it with no csc.
stock 4.2 malaysia
I'm currently using the stock malaysian 4.2. Updated using odin without wiping and factory reset. It started out fine for a week. Now, the lag is getting worse. Do someone know of a better region to choose without this lag problem?
Try the latest Russian SER update.
Russian Firmware
jrfailma said:
I'm currently using the stock malaysian 4.2. Updated using odin without wiping and factory reset. It started out fine for a week. Now, the lag is getting worse. Do someone know of a better region to choose without this lag problem?
Click to expand...
Click to collapse
try using Russian Firmware plus Gennxt XUBMGA Rom 4.2.2 or the Latest Gennxt MHD
tatzkie nga pala from davao
How are your galaxy grand doing guys? My grand has a broken usb port. It can charge but is not recognized by the pc. So i cant update nor root my galaxy grand. Im just waiting for someone to post an update or a root tutorial capable of flashing through stock recovery and not using odin and cwm. In technicalities i would rate myself 9 from 1-10.. so i pretty much know what im doing. And btw for what its worth, using the philippine update is actually ok.. all updates are fluid and good but u need to make sure first that before u update to a new firmware that your device is reset to factory default. And before you install an update, make sure to clear cache and factory reset the device first for effecient and smooth update. How i wish i could update and root my grand.. looks like i need to spend 2k-3k more just to have it fixed. But anyway, if you guys need my help, just reply to this thread.
And for faster and more efficient usage of your sd cards, make sure to use CLASS 10 SD CARDS ONLY.
BNB2 stock rom here. so far no lag issues.
for those of you who are experiencing lag on any stock rom you might wanna try this:
format /sys
format /data /media /sdcard
flash AMF7 4.1
flash BNB2(which ever stock rom you prefer)
I've been using BNB2 for less than a week now. the only issue that i've encountered is the color turning negative. i dont know if it has something to do with the rom or the system apps that i've uninstalled using nobloat app. anyways, it only happened once and the fix is just turning the screen off then on again.
venom621 said:
I've been using BNB2 for less than a week now. the only issue that i've encountered is the color turning negative. i dont know if it has something to do with the rom or the system apps that i've uninstalled using nobloat app. anyways, it only happened once and the fix is just turning the screen off then on again.
Click to expand...
Click to collapse
Since the very first week, Grand has this screen issue, for me atleast... The screen's colors become faded... the saturation drops!! and after the BNB2 update... it started becoming negative... God know after next update what will be happening! Switching to Note 2 now
@sidkota
Did you try Samsung service center ?
Sent from my GT-I9082 using Tapatalk
akiratoriyama said:
@sidkota
Did you try Samsung service center ?
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
yes... I've got my motherboard replaced... Still no solution...
@venom621: Do you have the link for the ROMs you used? I have my grand rooted but still on stock 4.2.2. Very laggy and I would like to try your version :laugh:. Is it still based from a stock ROM that can support dual SIM? Salamat ng marami (Thanks)
bahtul said:
@venom621: Do you have the link for the ROMs you used? I have my grand rooted but still on stock 4.2.2. Very laggy and I would like to try your version :laugh:. Is it still based from a stock ROM that can support dual SIM? Salamat ng marami (Thanks)
Click to expand...
Click to collapse
i just updated to this I9082XXUBNC1 >> http://samsung-updates.com/device/?id=GT-I9082
stock 4.1 - AMF7 4.1
again no lag issue. you can also try changing launchers. Touchwiz is really laggy on previous stock roms. Although touchwiz is pretty decent on the new rom, I still prefer nova launcher, much faster.
here is a video on the new rom(I9082XXUBNC1). nova launcher vs touchwiz
Video is a litlle bit slower while using screen recorder.
http://youtu.be/GetJTPV5qCM