Related
i flash my phone with a custom rom from this forum
succesfull until RSD Lite step
after RSD Lite, my phone stuck at Motorola logo with blur
tried pull off and pulling on the batery with power and volume up, it got back to bootloader screen
try aother RSD Power, it is still the same
Progress till 100 persen, but the phone stucked at motorola blur logo
any solution, guys?
thanks
What were you trying to flash?
I try to upgrade to froyo.
it stuck after RSD Lite step
Well first, is your phone rooted? Secondly, what stock version did you have?
I think I can get you up and running with Froyo
you may try to install your original version/build number sbf. if its work, maybe you can try flash froyo ROM again. then when you finished restore custom ROM all you have to do is go to bootloader then flash boot/devtree only sbf.. dont pull usb connection. but if RSD want you to turn phone manually then you need to press power button even though your phone at booting state..
i got the same problem, everything was working fine before i done it a couple times but then i used miui and my phone battery died and it wouldnt work after that so i decided to flash with rsd lite and after doing everything normally its just stuck at the motorola and moto blur symbol/animation thing. really frustrating.
-ashur
FL4M3K1NG said:
i got the same problem, everything was working fine before i done it a couple times but then i used miui and my phone battery died and it wouldnt work after that so i decided to flash with rsd lite and after doing everything normally its just stuck at the motorola and moto blur symbol/animation thing. really frustrating.
-ashur
Click to expand...
Click to collapse
did you find fix?
What SBF file did you use?
Have you tried another file?
get into stock recover (Vol Up + Power) then wipe data/cache
Half Bricked
I have an Mb525 rooted (that was) running stock 2.2 Blurred. I installed the Defy boot loader and hard reset/wiped partitions and (tried to) install cm7 from SD, it installs fine, goes fine, everything is all set. Reboot the device and the splash image pops up with the white LED first, then the blue one for boot loader, and finally the green one. It stays on splash screen. I tried 2 different versions of cm7 and both do the same thing. I'm able to access the boot loader, it just doesn't finish loading whatever I flash onto it.
As my phone is dysfunctional, I would appreciate it if you could contact me through my Skype;
kurtdunsmore
I won't receive emails.. =/
Specs:
Moto Defy shipped with 2.1
Rooted
Red Lense
T-Mobile, U.S.A.
Please let me know if any other information would be helpful.
tendyfish said:
get into stock recover (Vol Up + Power) then wipe data/cache
Click to expand...
Click to collapse
to go in stock recovery u must use Vol Down + Power
Solution
I had this problem. Found a solution at 4pda.ru
1. Shut down your phone.
2. Hold Volume- button, press Power button for 2 seconds. Then release both.
3. When you see Android robot press together both Volume+ and Volume- buttons.
4. Erase both Cache and Data.
5. Reboot.
Your phone should boot normally.
aed0101 said:
I had this problem. Found a solution at 4pda.ru
1. Shut down your phone.
2. Hold Volume- button, press Power button for 2 seconds. Then release both.
3. When you see Android robot press together both Volume+ and Volume- buttons.
4. Erase both Cache and Data.
5. Reboot.
Your phone should boot normally.
Click to expand...
Click to collapse
This worked perfectly well. Thank you.
Andy
Hello guys, first, sorry for my bad english.
I'm having some problems with my defy, I was using the CM7 for months but now it start to stuck on Motorola's logo and when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
So I tried to flash a old SBF that I have here, but, when the device will start again, it stuck on Motorola's logo again.
Then I downloaded a SBF that seems to be the "original of my phone version" and flashed it, but the device stills stucking at the Motorola's logo.
I think that I need to wipe data/cache, but how?!?
Any advices??
I need my phoneee!!
again flash with nodric ram
moji7 said:
again flash with nodric ram
Click to expand...
Click to collapse
Sorry, I don`t understand
He is saying you should start over and flash the Nordic SBF again.
But it would be helpful to know which SBF's you've tried which didn't work. What RSD lite version you are using? I'm using RSD Lite 5.3.1 and the 5.1.0 motorola driver and never had issues.
Don't forget to "wipe data/factory reset" and "wipe cache" in Stock Recovery (power + vol down) before flashing.
Also, what did you do before CM7 stopped working. It doesn't break for no reason.
twa_priv said:
He is saying you should start over and flash the Nordic SBF again.
But it would be helpful to know which SBF's you've tried which didn't work. What RSD lite version you are using? I'm using RSD Lite 5.3.1 and the 5.1.0 motorola driver and never had issues.
Don't forget to "wipe data/factory reset" and "wipe cache" in Stock Recovery (power + vol down) before flashing.
Also, what did you do before CM7 stopped working. It doesn't break for no reason.
Click to expand...
Click to collapse
Im using RSD lite 4.9 and I don't know the version of the drivers...
And I could not wipe data/cache because I could not access the stock recovery
when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
Click to expand...
Click to collapse
To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.
twa_priv said:
To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.
Click to expand...
Click to collapse
I already tried it, but i can't acces the stock recovery!
pituca292 said:
Hello guys, first, sorry for my bad english.
I'm having some problems with my defy, I was using the CM7 for months but now it start to stuck on Motorola's logo and when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
So I tried to flash a old SBF that I have here, but, when the device will start again, it stuck on Motorola's logo again.
Then I downloaded a SBF that seems to be the "original of my phone version" and flashed it, but the device stills stucking at the Motorola's logo.
I think that I need to wipe data/cache, but how?!?
Any advices??
I need my phoneee!!
Click to expand...
Click to collapse
Sorry, missed that part.
Well ... I don't recall reading about such behaviour before - unless the battery is dead.
But then you wouldn't be able to get the bootloader either.
I would try again to get into recovery and make sure you press the power + vol up buttons for a few seconds before releasing.
And out of curiosity: what exactly did you do when CM7 stopped working. It doesn't break for no reason.
twa_priv said:
Sorry, missed that part.
Well ... I don't recall reading about such behaviour before - unless the battery is dead.
But then you wouldn't be able to get the bootloader either.
I would try again to get into recovery and make sure you press the power + vol up buttons for a few seconds before releasing.
And out of curiosity: what exactly did you do when CM7 stopped working. It doesn't break for no reason.
Click to expand...
Click to collapse
I tried to enter in the recovery mode a lot of times and nothing!
I didn't done anything diferent that could make CM7 stop, it stopped by itself!
Guys, I'm thinking in send it to a techinical support, of Motorola.
What do you think?
twa_priv said:
To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.
Click to expand...
Click to collapse
You are a life saver!
-----------
I got a similar situation as our friend here. Today I had shutdown my Defy (rooted + stock 2.2.1) when i tried to turn It on again It got stuck at the operator logo forever!
I did the clear data from recovery and I got my cellphone back to live. Thanks!
Im Stuck too...
I have a problem with my Defy MB525, This morning I woke up and found the cell with the Android Logo with Exclamation, it was really hot so I turn off pulling the battery.
Then I tried to power ON but still stuck on Motorola's logo, in trying to enter the recovery (Pressing vol+ and Power but nothing, same pressing vol-).
the strangest of all is that my Defy don't display the white led, so it's not charging?
As far as I was to the symbol of android with red exclamation, I tried pressing the volume buttons but none served.
I was looking in other threads but nothing helps me, can you help me please? thanks.
Hi everyone,
I read all about this but not worked for me.
My motorola defy not go into recovery mode and bootloader do not, I tried all the tips in this particular topic -> http://forum.xda-developers.com/showthread.php?t=1065798 and others ... and nothing ...
I made a video trying to enter the bootloader and recovery mode ... follows -> http://www.youtube.com/watch?v=Cnof...xt=C320d15aUDOEgsToPDskJcSeRZyS4K6ks2H1YOYGqo
PLEASE HELP ME ...
If you see an m it's too late, try holding Vol up before inserting battery
Sent from my MT11i using Tapatalk
mpiekp said:
If you see an m it's too late, try holding Vol up before inserting battery
Sent from my MT11i using Tapatalk
Click to expand...
Click to collapse
You are not doing it properly. First of all make sure your phone is powered off. Then press the vol up key and keep pressing it. Then press the power key. Do not relese the vol up key till you see the bootloader.
you seem to be pressing vol-.
you have to press vol+ and then power on button or press vol+ and battery insert
popcorn1122 said:
you seem to be pressing vol-.
you have to press vol+ and then power on button or press vol+ and battery insert
Click to expand...
Click to collapse
I try press vol- before put batery, before press power on, before insert charger... I try press vol + too ... and nothing
I tried the mokey method
when i put the charger does not show the battery charging screen appears only the M ...
Was it to heaven of cell phones?
Remove cable and battery hold down volume + insert battery press power on, your now in bootloader ,now you can release Vol up and insert cable.
Sent from my MT11i using Tapatalk
are your vol buttons working properly?
To use the RST, you must use the Vol + button. If done correctly the motorola logo will not appear.
popcorn1122 said:
are your vol buttons working properly?
Click to expand...
Click to collapse
All started when the Defy began to restart on the startup MotoBlur screen, I went into recovery mode (vol-) and restore the original settings, but continued with the same problem. I tried to install via RSD Lite the Froyo rom, the Defy booted and stopped on the screen where need to enter the MOTOBLUR account, but he came back to restart.
After I entered the bootloader (vol+) with the rom JORLA, started normally and the screen to set up the account MOTOBLUR he restarts (again) with the same problem. I removed the battery to enter the bootloader to put Froyo rom again but no longer entered the bootloader, I tried the recovery menu and also failed. I put the charger and nothing, stay on the screen with the M in the center, it blink and does not leave him, I put in the USB but a white light turn on and the computer does not recognize anything.
I don't know what I do.
Sorry for my english ...
Daniel
popcorn1122 said:
you seem to be pressing vol-.
you have to press vol+ and then power on button or press vol+ and battery insert
Click to expand...
Click to collapse
I've a similar problem on a NEW Motorola Defy...
...can't go in Bootloader!!!
I've pressed Power and Vol+ BEFORE insert battery and doesn't work!
Recovery Mode works but I can't use RSD Lite to flash (is possible without recovery???)
My phone is a Defy Mini with red lens, 600 MHz CPU (so it isn't a Plus) and 1700mAH battery (like Plus?).
Is a italian phone branded by TIM (Telecom Italia Mobile), maybe they made some "lock"?
try this:
start and set RSDlite with your favorite sbf
than conect the phone in OFFMODE
if the RSDlite see your phone (something like this"S Flash 3630)
start flash the sbf
if not, try to charge the battery(could be empty) and try again
if even so RSDlite not see the phone NOW you have a problem
good luck
vaserbanix said:
try this:
start and set RSDlite with your favorite sbf
than conect the phone in OFFMODE
if the RSDlite see your phone (something like this"S Flash 3630)
start flash the sbf
if not, try to charge the battery(could be empty) and try again
if even so RSDlite not see the phone NOW you have a problem
good luck
Click to expand...
Click to collapse
Doesn't works BUT works when phone is ON (really really strange) and RSD reboot phone in flashmode, showing this:
MBM Flash-mode.
TinBoost
version: 01.0a
Bootloader USB Init SECURE BOOT ENABLED
Trying to flash DEFYPLUS_U3_4.5.1-134_DFP-231 but after preparig file it say:
Failed flashing process. Phone (0000); Error sending RAM download for bootloader. Device API Error: 0xE0020083 Adress: 0x82000000 Command: ADDR (0xE0222083)
---------- Post added at 01:22 PM ---------- Previous post was at 01:05 PM ----------
Sorry, it say XT320, I think it's a Defy MINI.
No way?
Divino said:
Doesn't works BUT works when phone is ON (really really strange) and RSD reboot phone in flashmode, showing this:
MBM Flash-mode.
TinBoost
version: 01.0a
Bootloader USB Init SECURE BOOT ENABLED
Trying to flash DEFYPLUS_U3_4.5.1-134_DFP-231 but after preparig file it say:
Failed flashing process. Phone (0000); Error sending RAM download for bootloader. Device API Error: 0xE0020083 Adress: 0x82000000 Command: ADDR (0xE0222083)
Click to expand...
Click to collapse
what phone you have?
did you flash before that an sbf for other device?
edit:
whay you try to put on xt320 an sbf for defy+?
you need a sbf for your tipe of phone
search here http://forum.xda-developers.com/showthread.php?t=1787152
vaserbanix said:
you need a sbf for your tipe of phone
search here http://forum.xda-developers.com/showthread.php?t=1787152
Click to expand...
Click to collapse
Yes, I was thinking it was a Defy...
...some of this roms is rooted?
;_(
Divino said:
Yes, I was thinking it was a Defy...
...some of this roms is rooted?
;_(
Click to expand...
Click to collapse
i dont know!
i have defy mb525
you can look here too http://www.motorola.com/Support/US-EN/Country-Selector/XT320-DEFY-MINI
My precious DEFYred cm10JB.Quarx powered by JellyX kernel
system format
Hi!
Sorry it's my first question here on XDA forum.
I have a Defy with CWM, and Stock ROM. Can I use format system partition, and then flash a Custom ROM from a zip file in CWM? Or should I use just wipe data/cache, then flash a Custom ROM? Which is better?
Thanks
danee91 said:
Hi!
Sorry it's my first question here on XDA forum.
I have a Defy with CWM, and Stock ROM. Can I use format system partition, and then flash a Custom ROM from a zip file in CWM? Or should I use just wipe data/cache, then flash a Custom ROM? Which is better?
Thanks
Click to expand...
Click to collapse
First: You posted in wrong thread, this thread is only for that defy's not going in locked on M logo and no recovery & bootloader. 2nd: You don't need to format system rom, because cwm wipe it while flashing ROM zip. Just wipe data/cache/dalvik and you'll fine.
Has anyone saved this problem ? i`m into the same situation...
Try monkey method - hold volup + power and when insert battery. Helped for me once. If this method will not help try this - 1.remove phone battery from defy, 2.plug charger to socket ,but not in the phone, 3. Holding volup button plug charger in phone without battery, 4. It should enter in bootloader but with blinking VATTERY LOW. CANNOT PROGRAM, 5. put battery in phone, 6. Reflash with rsd lite. If above metods not helping - still moto logo - mainboard fried, when only one solution - service center. Good luck. :thumbup:
Sent from my MB526 using xda app-developers app
popcorn1122 said:
are your vol buttons working properly?
Click to expand...
Click to collapse
how can i know ?
tnx.
Hello everybody ,
I have a Defy and .. is dead ! The RSDLite dont show the device .. and .. i try the instructions from http://forum.xda-developers.com/showthread.php?t=1618718 .. but no result ..
i cant restore sbf with RSDLite and .. the phone does not leave the screen
Details.. what do you see on screen?. Where are you stuck at?
Is your battery charged??
Sent from my Defy+ using Tapatalk 2
yeah .. the battery is charged ..
when i turn on .. dont show nothing .. the led is aways off. .. sometimes turn on white .. nothing more ..
in rsdlite .. the phone dont show ..
tiagomoraisc said:
yeah .. the battery is charged ..
when i turn on .. dont show nothing .. the led is aways off. .. sometimes turn on white .. nothing more ..
in rsdlite .. the phone dont show ..
Click to expand...
Click to collapse
are u able to go in Boot loader MOD?
press Volume+ key and Power on the phone..
it will go to BL Mod CONNECT PHONE TO PC VIA USB open RSD Lite
then RSD Lite will Recognize your phone
then flash your SBF
1.Download RSD lite v5.3.1 or later version and install it.
2.Download MotoDev USB drivers from here (http://bit.ly/K59zlZ and install it.
3.Turn off your phone
4. Hold down Volume Down and Power button for your phone to enter Stock Recovery.
5. Press both Volume buttons at the same time for the options to appear.
6. Do wipe cache.
7. Do wipe data/factory reset.
8.Take your battery out.
9.Hold Volume Up and Power button and put the battery back in while holding the buttons - your phone will start in Bootloader mode.
10.Connect the phone which is now in the Bootloader mode to the PC.
12. Open RSDLITE which you have installed and select the Downloaded sbf
13.Click "Start"
14. You can see "SW Update in progress" on your phone's screen - the flashing is in process.
15. The flashing process takes around 5 minutes, after which RSD lite will reboot your phone.
16. Wait until RSD lite says "PASS!" and then you're free to disconnect your phone (*if RSD lite doesn't say "PASS!" after 2-3 minutes and your phone has booted up, you're still free to disconnect).
17. Root your phone using Doomlord's script or SuperOneClick.
18. Install SndInit for defy+ from here.http://dl.xda-developers.com/attachd...itDefy_2.3.apk
If you need any more info on how to root or flashing the rom, Please ask and stay away from trouble.
Tanks Anands3 ...
but .. my phone dont show in RSDLite .. and .. dont enter in Stock Recovery screen ...
when i press Volume+ and Power ..
nothing happens ...
tiagomoraisc said:
Tanks Anands3 ...
but .. my phone dont show in RSDLite .. and .. dont enter in bootloader screen ...
when i press Volume+ and Power ..
nothing happens ...
Click to expand...
Click to collapse
It might won't show up but try this..
Press volume+ & Power button. Even if the screen remains blank, connect it to RsdLite. If it shows up in RsdLite, flash the SBF.
If it doesn't, then unfortunately, its bricked.
Sent from my Defy+ using Tapatalk 2
Ok ... this screen need show ..
so, i will get other batery with a friend ..
and will try again ...
later i talk about ..
tanks guys !
Hummm ... bad news .. !!!
When i hold Volume (-) & Power .. the phone dont enter in Stock Recovery screen!
The only thing that happens is: LED lights in WHITE, when I connect to the computer. just it!
what i can do now?!
Did you change the battery with a one that is charged FOR SURE?
same problem last several days and i fixed it:
+remove battery and put it back (make sure battery full charged)
+press power button and volume+ for 5 secs,even the screen still black
+connect to computer,u can see white led and RSD lite will display usb connected
+flash *.sbf
if it doesn't work u can try with another computer or cable
good luck!
Auris 1.6 vvt-i said:
Did you change the battery with a one that is charged FOR SURE?
Click to expand...
Click to collapse
Yeah ..
i try with other batery ..
And still no luck?
haiwru said:
same problem last several days and i fixed it:
+remove battery and put it back (make sure battery full charged)
+press power button and volume+ for 5 secs,even the screen still black
+connect to computer,u can see white led and RSD lite will display usb connected
+flash *.sbf
if it doesn't work u can try with another computer or cable
good luck!
Click to expand...
Click to collapse
Hey man .. tanks . but ...
When i press Volume+ & Power nothing happen ..
when i conect the phone to computer nothing happen in RSDLite ..
so .. i cant flash a .sbf file ..
and .. i try with other cable .. and .. no response ..
i have a big problem!
When you connect, does it turns White LED on??
Sent from my Defy+ using Tapatalk 2
when i connect the LED is White .. just it
i have the same problem...
my battery is fully charged...
when i press the power button, it wont turn on... even the led doesnt blink..
when i press the power button + volume up or volume down, nothing happens...
when i try to connect it with RDSLite v5.3.1, it recognizes my defy+...
i tried to flash diffferent stock roms but nothing comes up even the flashing proccess suceeded (PASS)...
my defy+ is still at nothing status...
the last rom i flashed is JORDN_U3_97.21.51.sbf...
HOPE SOMEONE CAN HELP US...
THANKS IN ADVANCE!!
talakoto said:
i have the same problem...
my battery is fully charged...
when i press the power button, it wont turn on... even the led doesnt blink..
when i press the power button + volume up or volume down, nothing happens...
when i try to connect it with RDSLite v5.3.1, it recognizes my defy+...
i tried to flash diffferent stock roms but nothing comes up even the flashing proccess suceeded (PASS)...
my defy+ is still at nothing status...
the last rom i flashed is JORDN_U3_97.21.51.sbf...
HOPE SOMEONE CAN HELP US...
THANKS IN ADVANCE!!
Click to expand...
Click to collapse
Seems your problem is flashing sbf with too low CG version - sbf u mentioned is CG5 Chinese eclair. Depending of what u had before u can install CG6 or CG7 sbf from this site
talakoto said:
i have the same problem...
my battery is fully charged...
when i press the power button, it wont turn on... even the led doesnt blink..
when i press the power button + volume up or volume down, nothing happens...
when i try to connect it with RDSLite v5.3.1, it recognizes my defy+...
i tried to flash diffferent stock roms but nothing comes up even the flashing proccess suceeded (PASS)...
my defy+ is still at nothing status...
the last rom i flashed is JORDN_U3_97.21.51.sbf...
HOPE SOMEONE CAN HELP US...
THANKS IN ADVANCE!!
Click to expand...
Click to collapse
Try flashing the last rom that worked for you.
Sent from my Defy+ using Tapatalk 2
corrinti said:
Seems your problem is flashing sbf with too low CG version - sbf u mentioned is CG5 Chinese eclair. Depending of what u had before u can install CG6 or CG7 sbf from this site
Click to expand...
Click to collapse
im currently trying all of the roms listed on the link you gave...
some gave me error Err:A5,69,35,00,27 on bootloader... (seems much better status than before)
some gave me nothing... (just like before - blank screen, no led)
17 more roms to go...
talakoto said:
im currently trying all of the roms listed on the link you gave...
some gave me error Err:A5,69,35,00,27 on bootloader... (seems much better status than before)
some gave me nothing... (just like before - blank screen, no led)
17 more roms to go...
Click to expand...
Click to collapse
i flashed the ROOTED EU CEE rom from this thread http://forum.xda-developers.com/showthread.php?t=1542956
THIS ROM CAN'T DOWNGRADE,TRY IT IF U HAVE NOWAY TO LET YOUR PHONE ALIVE
hey u all
my phone is a brick ...:crying:
jast used RSD Lite and the .SBF pass = ok but when the motorola defy try to move on the computer says "usb unrecognized"
what can i do from here ? please help me its an emergency.
tnx alot :good:
the screen is black\not responding when i push the power on ... im not geting the motorola logo :crying:
what can i do ?
only the power light is on when im charging the phone...
please help me :good:
Pic status of my motorola defy
The phone is jammed like this - please what can i do ?
Can you boot into bootloader? (Power + Volume up)
Install motorola drivers for pc, install rsd, enter the bootloader with power+volume up buttons like xiihyou said, then connect your phone via usb to pc and start the rsd proces flashing....
Should Help
The same happen to me , solution is simple .....
Just Install drivers ( HERE http://forum.xda-developers.com/showthread.php?t=1100585)
Pull out battery, now put it back with Power button and Volume up pressed together
you should be in bootloader mode
Now choose the right SBF file for your Phone .....
After you Defy boots up, Shut it down -> wipe data and cache ( Press Power button and Volume Down)
And now your mobile should be OK
xiiihyou said:
Can you boot into bootloader? (Power + Volume up)
Click to expand...
Click to collapse
no..what can i do from here ?
tnx ?
yzeroy said:
The same happen to me , solution is simple .....
Just Install drivers ( HERE http://forum.xda-developers.com/showthread.php?t=1100585)
Pull out battery, now put it back with Power button and Volume up pressed together
you should be in bootloader mode
Now choose the right SBF file for your Phone .....
After you Defy boots up, Shut it down -> wipe data and cache ( Press Power button and Volume Down)
And now your mobile should be OK
Click to expand...
Click to collapse
did that but still cant get the phone into bootloader
the phone is connected to the computer (usb) but there is only a white light on the top screen that it :crying:
please help me what can ido from here ?
tnx alot.
i had a similar problem, i couldn t turn on the phone or enter the bootloader, it was just a black screen... then i just install the drivers on pc and start a rsd without entering the bootloader, it worked for me....
tuneon said:
did that but still cant get the phone into bootloader
the phone is connected to the computer (usb) but there is only a white light on the top screen that it :crying:
please help me what can ido from here ?
tnx alot.
Click to expand...
Click to collapse
So just start flashing SBF it must work .... (you may needn´t get phone into bootloader mode because it is in bootloader mode)
yzeroy said:
So just start flashing SBF it must work .... (you may needn´t get phone into bootloader mode because it is in bootloader mode)
Click to expand...
Click to collapse
The RSD Lite cant recognize the phone - i haved tried all the method with the + & the - & battery but still nothing its geting realy despair
please what can i do next ? its like the phone is died but the white light is still on when connected to the usb cable.
The RSD Lite cant recognize the phone - i haved tried all the method with the + & the - & battery but still nothing its geting realy despair
please what can i do next ? its like the phone is died but the white light is still on when connected to the usb cable.
tuneon said:
The RSD Lite cant recognize the phone - i haved tried all the method with the + & the - & battery but still nothing its geting realy despair
please what can i do next ? its like the phone is died but the white light is still on when connected to the usb cable.
Click to expand...
Click to collapse
First of all check your battery. Charge it using external charger or use mcgyer methode.
Sent from my Motorola Electrify using Tapatalk 2