ansar please help! - Surround General

Originally Posted by rezonikala
HI.
please help me
I want to install in my htc surround (AT&T) [13.4.2012][NT 8773 18L 3La 3Lb 22L]Surround_ML_51250203_R_5690905a_22505021 by ansar
Surround begins to install and on 6% stops. - error (226). tried many times but always comes up to 6% stops.
my phone is switched off during the work itself.
it becomes warm and not included until it is cool
I take out the battery and put back.
it begins to work and once I go online or play it switchs off again.
please help!

rezonikala said:
Originally Posted by rezonikala
HI.
please help me
I want to install in my htc surround (AT&T) [13.4.2012][NT 8773 18L 3La 3Lb 22L]Surround_ML_51250203_R_5690905a_22505021 by ansar
Surround begins to install and on 6% stops. - error (226). tried many times but always comes up to 6% stops.
my phone is switched off during the work itself.
it becomes warm and not included until it is cool
I take out the battery and put back.
it begins to work and once I go online or play it switchs off again.
please help!
Click to expand...
Click to collapse
Try to flash any other ROM.

Related

Huge problems with my Touce

Hi all,
i've tried to chnege the ROM the the last official ROM from HTC, and when getting to 32%, it got stuck, leaving me with Touch Cruise that is not working at all.
all retries never succeeded. what can i do ? the phone is not working at all.
please assist.
evolfin
Will Try To Help
As alwayes - we will try to help you - will see what we can do for a Friend
evolfin said:
Hi all,
i've tried to chnege the ROM the the last official ROM from HTC, and when getting to 32%, it got stuck, leaving me with Touch Cruise that is not working at all.
all retries never succeeded. what can i do ? the phone is not working at all.
please assist.
evolfin
Click to expand...
Click to collapse
Take a look here http://forum.xda-developers.com/showthread.php?t=381600
Follow all the steps and you should be OK. Good luck.

Peblem with HTC p3400 After upgrade

Dear All
Please help
I did an upgrade and after I tried to urn it on, the mobile just vibrate andnothing else, screen still off , and every thing is off
i tried o start it in boot mode but itis not worked
please help
essa_mohanned said:
Dear All
Please help
I did an upgrade and after I tried to urn it on, the mobile just vibrate andnothing else, screen still off , and every thing is off
i tried o start it in boot mode but itis not worked
please help
Click to expand...
Click to collapse
what u have done plz tell and which rom u have flashed.
read guide and FAQ in upgrading section.
I find this too!
Well,
I am a regular flasher of the ROMs here!
I have faced the issue since some 3 weeks now!
No particular change except tons of ROM changes!
I thought initially, there might be some problem or issue that I have developed thr some mods in the reg-editor.
So I reflashed, and flashed again!
But I see the problem is there and is fairly random!
Though the link I feel is there is with browser use!, whenver I use any browser, its more frequent in occurence.
Anybody has a fix yet?
////
edit: ROMs tried to solve the issue:
Windows REloeded
Genero
Genique
<all latest versions! - Awesome ROMs .. thank you again!>
////
/btw, Windows reloaded ROCKS !! /

[ROM]RUU_Mozart_Telstra_WWE_1.23.841.05_5.50.09.18_22.2 4.50_RELEASE

Here latest shipped ROM for Telstra Mozart (Australian device)
http://www.multiupload.com/ENS9JCOUH8
Enjoy!
Football said:
Here latest shipped ROM for Telstra Mozart (Australian device)
http://www.multiupload.com/ENS9JCOUH8
Enjoy!
Click to expand...
Click to collapse
Hi,
This is also Great-Britain code but with added info for the Australian operator, already analysed.
Not pure WWE i.e. 0x0409.
Thnx, ansar.
This worked a Treat
Through work aquired a Mozart with Telstra Demo(Store) Rom. Very furstrating as it wouldnt hold settings and kept playing that damn video.....
Downloaded this rom (following the links from here and trying a few download mirrors until I found one that worked)
Turned off Phone
Held Volume Down Key while Pressing Power Button (This turns the phone on and launched Bootloader)
Connected to PC Waited about 5 minutes while Windows auto detected the drivers and installed what it needed
Right Mouse clicked on the downloaded Rom and selected "Run as Administrator"
Followed the prompts.
****NOTE**** When it got to 10% the phone rebooted - LET IT!!!!! DO NOT TOUCH IT DO NOT DISCONNECT IT - Just wait -The computer will redetect and about 10 Min later VIOLA - All sorted nice and clean WP7 HTC Mozart (with a with Telstra One Hub - which aint that bad) - Whacked the 3 Sim card in - Downloaded Connection Setup Wizard from market place and a few minutes later was sending and receiving MMS etc
Thanks for the ROM
Hi,
can you tell me if there is still only English UK as the display language?
Or is it possible to select a different display language with this rom?
Alex
Heph said:
Hi,
can you tell me if there is still only English UK as the display language?
Or is it possible to select a different display language with this rom?
Alex
Click to expand...
Click to collapse
Unfortunately English only...although you fan change your locale and regional settings.... Frustrating for me too because I want to Install Bahasa Indonesia but I cant figure that our yet.
Does this also include radio?
Im curious...does the rom package includethe radio as well? Im tempted to attempt the Asian Rom So i can possibly get the Indonesian language pack. Been a Telstra Mozart this operates on 850 3G I would want to minimise risk of a lockup by trying without radio.
i found link but admin is not allowing me to post link as my user limitations as all
all links are dead and i found link to post but cannot post as my limations
Someone able to reupload this?

WP7 Market Noob question

Hey Everyone,
Please bare with me I've had this device for 2 days I have an unlocked HD2 with Back to the Future [XBmod-Yuki][Updatable] ROM installed and completely updated to the latest version. The problem I'm having is my phone's marketplace and online marketplace still says it has to be updated with zune even though it's completely up to date, so I can't download any apps. Can anyone PLEASE help me??
Thanks in advance!
johnblundon said:
Hey Everyone,
Please bare with me I've had this device for 2 days I have an unlocked HD2 with Back to the Future [XBmod-Yuki][Updatable] ROM installed and completely updated to the latest version. The problem I'm having is my phone's marketplace and online marketplace still says it has to be updated with zune even though it's completely up to date, so I can't download any apps. Can anyone PLEASE help me??
Thanks in advance!
Click to expand...
Click to collapse
Had the same problem, switch to this ROM: "3_HD2 Pdaimatejam Rom Wp7.8 OS 7.10.8835.35 v8.5"
I found it working better than I expected! Don't forget to get an activating code for your live services, just chat with the Windows Phone support. :good:

[13.4.2012][NT 8773 18L 3La 3Lb 22L]Surround_ML_51250203_R_5690905a_22505021 by ansar

HI.
please help me
I want to install in my htc surround (AT&T) [13.4.2012][NT 8773 18L 3La 3Lb 22L]Surround_ML_51250203_R_5690905a_22505021 by ansar
Surround begins to install and on 6% stops. - error (226).
tried many times but always comes up to 6% stops.
my phone is switched off during the work itself.
it becomes warm and cool until it is not included
I take out the battery and put back.
He begins to work and once I go online or play it again is switched off.
please help!
HELP
rezonikala said:
HI.
please help me
I want to install in my htc surround (AT&T) [13.4.2012][NT 8773 18L 3La 3Lb 22L]Surround_ML_51250203_R_5690905a_22505021 by ansar
Surround begins to install and on 6% stops. - error (226).
tried many times but always comes up to 6% stops.
my phone is switched off during the work itself.
it becomes warm and cool until it is not included
I take out the battery and put back.
He begins to work and once I go online or play it again is switched off.
please help!
Click to expand...
Click to collapse
???
rezonikala said:
???
Click to expand...
Click to collapse
ansar plz Help....
ansar plz Help....
rezonikala said:
HI.
please help me
I want to install in my htc surround (AT&T) [13.4.2012][NT 8773 18L 3La 3Lb 22L]Surround_ML_51250203_R_5690905a_22505021 by ansar
Surround begins to install and on 6% stops. - error (226).
tried many times but always comes up to 6% stops.
my phone is switched off during the work itself.
it becomes warm and cool until it is not included
I take out the battery and put back.
He begins to work and once I go online or play it again is switched off.
please help!
Click to expand...
Click to collapse
...

Categories

Resources