Hi guys! my question is: if you can install CM7 or CM9 milestone in my .. I sold it but it comes with android 2.3.6 .. I can not be root! maybe help me to install or CM9 CM7. and if you can as I do?
a question must be root to install CM?
I have prior knowledge of android had a i897 with JB but this is diferete ... help me please?
josefo_18 said:
Hi guys! my question is: if you can install CM7 or CM9 milestone in my .. I sold it but it comes with android 2.3.6 .. I can not be root! maybe help me to install or CM9 CM7. and if you can as I do?
a question must be root to install CM?
I have prior knowledge of android had a i897 with JB but this is diferete ... help me please?
Click to expand...
Click to collapse
Did you even read the forums?
http://forum.xda-developers.com/showthread.php?t=1758271
Related
Hello,
I created my own CyanogenMod 7 ROM for a Motorola Defy+
Now I have a new Defy+ with 2.3.6 I would install my ROM but its not possible.
Can anyone explain me how I create a CM7 ROM for the 2.3.6 Defy?
regrads
Nico-X
Nico-X said:
Hello,
I created my own CyanogenMod 7 ROM for a Motorola Defy+
Now I have a new Defy+ with 2.3.6 I would install my ROM but its not possible.
Can anyone explain me how I create a CM7 ROM for the 2.3.6 Defy?
regrads
Nico-X
Click to expand...
Click to collapse
Sorry dint quite get you. What exactly do you mean by not possible?! You are not able to install or is it that you are getting some errors? Hope you already know about snd init and the process...
pranks1989 said:
Sorry dint quite get you. What exactly do you mean by not possible?! You are not able to install or is it that you are getting some errors? Hope you already know about snd init and the process...
Click to expand...
Click to collapse
Sorry for the bad description.
I can root my Phone and install my CM7 ROM with the Recovery.
If I boot the Phone normal it hangs at the Red Motorla Logo.
After install the Defy+ Nightly Build the phone boots complitly fine.
Actually I would like to use the nightly source to build a new ROM.
Is it possible to download this source code?
regards
Nico-X
I've really searched everywhere but it's too complicated and i can't seem to find a solution.
So, my issue is that i have installed the ICS CM9 with GB kernel, but i want to install the WIUI 2.4.20 Stable (GB) version that is based on MiuiAndroid 2.3.7 (GB).
I am assuming it requires the Froyo kernel, and if so, i need to somehow downgrade it to froyo before installing it, but i don't know hot to do it...
can anyone please help me?
Also the kernel version of my rom is "2.6.32.9-g21f1a48"
Questions go in the Q&A section
daaamn_ said:
I've really searched everywhere but it's too complicated and i can't seem to find a solution.
So, my issue is that i have installed the ICS CM9 with GB kernel, but i want to install the WIUI 2.4.20 Stable (GB) version that is based on MiuiAndroid 2.3.7 (GB).
I am assuming it requires the Froyo kernel, and if so, i need to somehow downgrade it to froyo before installing it, but i don't know hot to do it...
can anyone please help me?
Click to expand...
Click to collapse
as far as i remember 32 is froyos kernel..(35 is gb's kernel)
so what is the problem???
Numbers are the same I thought. If you flashedthe gingerbread kernel from the recovery, just search for the froyo kernel zip (there is one on epsy's site) and flash it with the froyo based ROM.
Don't forget to wipe.
Sent from my MB525 using XDA
labsin said:
Numbers are the same I thought. If you flashedthe gingerbread kernel from the recovery, just search for the froyo kernel zip (there is one on epsy's site) and flash it with the froyo based ROM.
Don't forget to wipe.
Sent from my MB525 using XDA
Click to expand...
Click to collapse
Hello, I read on a lots of topic that say we have to pass on nandroid and other thing for downgrade.. so i want to be sure that i can downgrade my gb kernel to froyo kernel juste like this..
When i read that, that or that for me it is impossible directly...
Thank you.
-------------------------------------------------------------------------------------
My English is horrible... Sorry
*Don't respond with comments saying read this or that...
I have read the guides for moto defy mb525 U.S. tmobile and yet i don't understand a thing. I have a bionic and have rooted/flashed/sbf'd before so I have experience but not with this device. I tried understanding from the wiki and beginners guide yet it didn't help me at all. (I'm dumb)
MY Goal: Jellybean CM10 on my Defy
I am currently on froyo 2.2 and I don't understand how to get CM10
I have an original tmobile u.s. defy (Im pretty sure its green lens)
If someone can provide links I can learn:
What should I SBF to?
What should I use to root?
How do I flash cm9 kernel (I heard its the only way to get the CM10 working on a tmobile mb525)
Once I get a recovery I know how to flash and stuff I just want to be guided until I get to clockwork recovery and have the cm9 kernel flashed.
Please help, don't flame....its what makes this community great
Root it with SuperOneClick 1.9 for Defy! it should be somewhere on xda I dont know where use the search function...
Install 2nd INIT it should add cwm
Sent from my MB525 using xda premium
Sorry Sir but its useless to flash CM10(current version) on MB525 coz its being made for MB526(Defy+). Your efforts will be in vein. Why not go for 4.0.4 by Eppy? Latest build is stable as hell!
I read that you can flash CM10 by quark on your green lens defy but of course camera won't work
I got soft reboots. And the current version can't make calls/text.
Go for CM9 its really getting into its groove now
Sent from my MB525 using xda app-developers app
NI55AN said:
I got soft reboots. And the current version can't make calls/text.
Go for CM9 its really getting into its groove now
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
+1
Since you sound new to flashing roms, you shouldn't start off with an alpha rom you have to port, instead, start with an Epsy CM9 or Maniac103 CM7 -- both are stable and a good place to start learning about rom flashing.
***Before you start flashing sbf's, you should read the sbf thread and find an sbf you like that's on the same BL version you're currently on, or if out of warranty, flash a bl6 sbf so you can switch between the GB and Froyo kernels. I'm not going to go into BL versions anymore, but that's one of the most important things you need to learn when flashing Defy roms and sbfs.***
For rooting, I use SuperOneClick 1.9.5. Then just enable non-market apps and install Defy 2nd-Init Recovery, reboot into it, select wipe data\factory reset, then flash cm7 or 9 followed by the appropriate version of gapps. Those steps will soon become second nature, to the point where you can root and flash a custom rom in your sleep.
All the tools and roms can be found by searching the forums. Good Luck and welcome to the wonderful world of custom roms.
I got jellybean working thanks yall for the help.....its the kernel parts that threw me off but i learned
Google contact
sy0120 said:
I got jellybean working thanks yall for the help.....its the kernel parts that threw me off but i learned
Click to expand...
Click to collapse
Pls , how to sync google contact for Defy MB525 using Jelly Bean 4.1
Bé Yêu said:
Pls , how to sync google contact for Defy MB525 using Jelly Bean 4.1
Click to expand...
Click to collapse
Flash gapps for jb and then sync.
S3nt fr0m my D3fy/w1u1 GB st4BL3
nidhish91 said:
Flash gapps for jb and then sync.
S3nt fr0m my D3fy/w1u1 GB st4BL3
Click to expand...
Click to collapse
Thanks !
I installed GAP and working normal now ! Howerver , I must have install " File Manager " from Market .
Hello I have a Defy MB525 and I'd like to give it an upgrade and since there's no official Android releases above 2.2 I'm thinking about installing CM) which is 4.0 based right? I'd like to know how's the performance? does it become slower or how many bugs are? would you recommended it? thanks in advanced, it looks really good so I'd like to try it!
dear friend, trust me .you'd better use the CM9 latest by quarx's.Now we all taste the JB already
anyway the Quarx's CM series(CM7,CM9.CM10) are very perfect on Defy.
You must to try for it!:good:
for everyday rom, try cm9 by epsylon froyo kernel. I am using it and there's no issue or bug I have encountered (I use my defy as a phone).
What are the major differences between Quarx's and Epsylon ROMS? thanks you both for the info!:good:
there is no difference in both builds, afterall both are ics...
why don't you try both using multiboot and decide yourself.
I will give them a try, both releases can be found on Development section right? any link? thank you!
EDIT: Now that you mention it? how can I use multiboot? could I have stock rom and custom rom?
saman0suke1 said:
I will give them a try, both releases can be found on Development section right? any link? thank you!
EDIT: Now that you mention it? how can I use multiboot? could I have stock rom and custom rom?
Click to expand...
Click to collapse
There is multiboot thread in development section, just go through it and you will find out how.
And yes you can have stock rom as base rom and custom rom as virtual rom as long as you have same kernel for both.( for mb525 its froyo kernel)
Btw the link for multiboot - http://forum.xda-developers.com/showthread.php?t=1364659
Thanks! Do you have by any chance the links for CM9 by Quarx and Epsylon? thank you!
rishi2100 said:
there is no difference in both builds, afterall both are ics...
why don't you try both using multiboot and decide yourself.
Click to expand...
Click to collapse
NOT RECOMMENDED. The performance you'd get from a ROM installed to your microSD (that's what multiboot does!) is inferior to having installed in the ROM partition of the phone.
saman0suke1 said:
Thanks! Do you have by any chance the links for CM9 by Quarx and Epsylon? thank you!
Click to expand...
Click to collapse
Cm9 by epsylon - http://defy-cm.net/
And by quarx - http://quarx2k.ru/
I will skip the installation of MultiBoot for now, but I will try either Quarx's or Epsylon's ROM, thank you!!
hello everyone since this is my first time to try installing a ROM on my defy. I want to know first if it is okay to install this [ICS] CM9.1 Android 4.0.4 version on my defy its current os installed is 2.1update1 eclair. and do i need to root my android first?
ieirileo99 said:
hello everyone since this is my first time to try installing a ROM on my defy. I want to know first if it is okay to install this [ICS] CM9.1 Android 4.0.4 version on my defy its current os installed is 2.1update1 eclair. and do i need to root my android first?
Click to expand...
Click to collapse
U need to root ur fone first
Then install cwm
Then install ics
Sent from my MB526 using xda premium