Hi. I have successfully rooted my tab and put cwm based recovery on it. However, after every reboot, it shows "Android is upgrading". It comes to the home screen eventually but its a bit annoying and i was wondering how to fix it. I havent removed any stock apps as of now. Anyone have any ideas?
EDIT: On another forum it says that removing and reinstalling TB fixes it! Havent tried it yet.
Related
Received the update notification this morning, happily started downloading and installation.
Like some out there, the tablet rebooted and it seemed to install but up to about 1/4 progress it froze with a central honeycomb logo with exclamation mark. Thought it was part of the process, left alone for an hour but nothing happened, hence rebooted with a notification of 'update failed'.
Searching through google and xda forum the last 2 hours -- have tried the unrooting the device, plugging in to power, removing sd card to no avail.
Someone has also suggested to restore wpa_supplicant file under system/bin. I don't remember altering the file at all, and when I check the file it is dated 29/3/2010... i bought my device in April, hence assuming it has not been altered either by myself or from any app. Like wise for the telephony files as well, as I haven't changed anything to try to stop the cell standby issue to improve battery life.
I am left with no options unless someone has a better idea. I have not uninstalled any pre-loaded apps. Rooted with Gingerbread (and as I said tried unrooted and re-rooted without success in updating).
Thoughts?
Current build:
Android version 3.0.1
Kernel 2.6.36.3
Build no. Acer_A500_1.139.04_COM_GEN1
Failed system update to 4.010.24
I am located in Melbourne, Australia.
(Last thing would be to download the actual rom and update via CWM.)
open /cache/recovery/last_log on your tablet use root explorer
ypu will know whats wrong
I'm in Melb too, and that particular update has failed to download about 5 times now, and when it finally downloaded, it came up with a message saying "update invalid" or something along those lines. I'm gonna wait til I get home to try and update again.
altering WPA_Supplicant file is something you would've done so your tab would connect to ad hoc networks. Must be something else.. did you alter any other files? I'm working on this same issue. frustrating as f*#%
I was running stock rooted 3.01 and was failing updates over and over until I flashed back to the stock recovery using the Acer recovery apk. As soon as I did that and tried the ota update again it worked right away... once 3.1 was installed I rerooted using iconia root 2.1 and flashed cwrecovery back to tablet... let me know if this helped
acorsino said:
I was running stock rooted 3.01 and was failing updates over and over until I flashed back to the stock recovery using the Acer recovery apk. As soon as I did that and tried the ota update again it worked right away... once 3.1 was installed I rerooted using iconia root 2.1 and flashed cwrecovery back to tablet... let me know if this helped
Click to expand...
Click to collapse
Same for me. Had to go back to stock recovery for the OTA update to work.
Mine failed the first time. I rebooted and it worked the second time.
I tried using Acer Recovery Installer 1.5, checking Stock USA 1.141.07_COM_GEN1 and touched "install recovery image", rebooted, and nothing happened?
My build number remains 1.139.04_COM_GEN1
I am sure I have missed something...
Tried downloading and installing the 5th time, still failed and stuck at the same progress bar of 1/4 followed by that annoying honeycomb with exclamation mark logo.
mashilu said:
I tried using Acer Recovery Installer 1.5, checking Stock USA 1.141.07_COM_GEN1 and touched "install recovery image", rebooted, and nothing happened?
My build number remains 1.139.04_COM_GEN1
I am sure I have missed something...
Tried downloading and installing the 5th time, still failed and stuck at the same progress bar of 1/4 followed by that annoying honeycomb with exclamation mark logo.
Click to expand...
Click to collapse
If you see the little bee fail screen, it is not the stock recovery, but still CWM.
mashilu said:
Received the update notification this morning, happily started downloading and installation.
Like some out there, the tablet rebooted and it seemed to install but up to about 1/4 progress it froze with a central honeycomb logo with exclamation mark. Thought it was part of the process, left alone for an hour but nothing happened, hence rebooted with a notification of 'update failed'.
Searching through google and xda forum the last 2 hours -- have tried the unrooting the device, plugging in to power, removing sd card to no avail.
Someone has also suggested to restore wpa_supplicant file under system/bin. I don't remember altering the file at all, and when I check the file it is dated 29/3/2010... i bought my device in April, hence assuming it has not been altered either by myself or from any app. Like wise for the telephony files as well, as I haven't changed anything to try to stop the cell standby issue to improve battery life.
I am left with no options unless someone has a better idea. I have not uninstalled any pre-loaded apps. Rooted with Gingerbread (and as I said tried unrooted and re-rooted without success in updating).
Thoughts?
Current build:
Android version 3.0.1
Kernel 2.6.36.3
Build no. Acer_A500_1.139.04_COM_GEN1
Failed system update to 4.010.24
I am located in Melbourne, Australia.
(Last thing would be to download the actual rom and update via CWM.)
Click to expand...
Click to collapse
Hi .. try to do that...
the uploaded file helped and solved my issue..i'm now running Honeycomb 3.1
Solution posted by Bob here: (correct the link below "www")
w w w.androidtablets.net/forum/acer-iconia-tab-a500-forum/18444-update-failed-help.html
Here's the WPA_Supplicant from my A500, after the 3.1 update. Hope this works for you guys.
I'm not sure what the extension is for the A500, but I had to add .zip to be able to upload it. Try removing the .zip before using it. Also, remove the 'original'. I added that to keep it straight on my tablet.
Good Luck.
Bob
p.s: sorry i'm a newbie here and can't post link outside the forum at the moment..
just follow the steps described by Bob!
I did see that different logo, which I subsequently rebooted as I thought it's frozen again.
Interestingly, I tried to push for another system update, attempt no. 7, and now, it progresses and complete update!!! Woo hoo!
Thanks for all the help. I still don't know which one sorts what out though... Cheers!
Hey guys. I have a very interesting situation happening with a VZW Galaxy Tab 7.1 that I bought from someone (I own a business buying/selling/trading cellphones and tablets)..
As soon as you boot it up, every app starts to force close!
If you sit there long enough and accept them all, you can actually use it a little bit. Apps keep FCing as you play with it, though.
The only noticeable thing is that the wallpaper always stays the same. It was 2.3.4 (I believe) when I got it, but I've tried flashing stock ROMs and the Galaxy Cubed 3 ROM through Heimdall, but that wallpaper ALWAYS stays there!
I just flashed the Galaxy Cubed 3 ROM on there 20mins ago, and everything switched over (the look, the battery icon, notification bar, window animations) EXCEPT that wallpaper (which ironically is of B.I.G.) and the FC issues.
I read somewhere about JTAG or something, but it boots fine, just having software issues.
PLEASE, if anyone knows anything about this issue, I need to sell this thing so I can make some money =) Thanks in advance for the help!
im in the exact same boat with a customers tablet. ive tried everything. takes forever to boot and factory reset does nothing. 4 installed apps never uninstall either.
Do you have custom recovery installed? After flashing with Heimdall, enter custom recovery and wipe data and cache. Reboot. No more issues.
I can't find a way to get custom recovery to flash. I've tried every walkthrough. There's no explanation as to why factory reset/wipe doesn't work
So, I've been trying to root my Galaxy s5 for a while now and I just got it to work successfully a few hours ago. With that, I installed CWM and everything was fine.
Now, I downloaded the latest nightly of CM12 for the S5 and I threw it on my SD card and ran my phone with the up volume home and power thing, selected the zip and it's now looping. It's been looping for maybe 25-30 minutes. It stopped and said it was upgrading apps for optimization, rebooted and is now stuck on the loading screen for CM12.
I literally know nothing about CM12 or rooting or any of it, I just successfully did it today, so I'm extremely new and know nothing. I didn't factory restore my device, I didn't do anything fancy like that, the tutorial didn't say that I needed to, I just selected it and installed and rebooted.
I tried taking the battery out, and it's still doing the same thing.
Any help is appreciated.
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
First of all, hello all!
I'm a new member here.
So, what's the problem? Well, I recently rooted my Galaxy Tab 4 SM-T530 (WiFi only version) with Kingroot. Then I installed Cyanogenmod from the thread listed at the ROM section. All was working fine up until I decided to flash the GApps.
I chose the newest versions (both Zero and Mini for 6.0) but none of them worked.
Flashing went well. The problem was after booting.
After the first boot, I'd get caught in an endless loop of errors stating that "Unfortunately, Setup Wizard has stopped working". I couldn't do much other than rebooting. But then, I was greeted with yet another problem: it was stuck in a boot loop. Basically, after saying that it "Prepared Google App" and some others, the tab would repeat the process in an infinite loop. I left it for half an hour to do so, but the problem persisted.
Keep in mind the fact that I installed the newest version of Mini GApps package provided from that thread.
If any of you can help me out with this, I'd be very thankful, since this is the same time I install a custom ROM, and I really don't want to come back to the old Samsung ROM
http://forum.xda-developers.com/tab-4/development/rom-slimrom-5-0-1-alpha-0-7-t2963906
This is from where I installed all things needed.
Try again, this time flash both zips at the same time and not doing anything in the middle of both flashes. The usual cause of the same error in my other s3 is booting the ROM up, going back to recovery, then flashing GApps.
I never did anything else. Now I wiped data/dalvik/system/cache, reflashed the ROM and now just finished reflashing both zips in TWRP (first Mini then Zero, can't do them at the same time).
Now, I'm pretty much 'fingers crossed', as this is what an error told me. Pretty much tried to flash the zips without wiping anything/reflashing the ROM. That's why I went for a clean install.
EDIT: it didn't work at all. Still caught in the same "Preparing app x" boot loop. Now I'll let it run for 6 hours and see if not my own impatience is the problem.
EDIT 2: For some reason it took ages to boot up. Now, when I finished booting, I saw that the Play Store, Quick Search Bar and the Google Services weren't working at all. I tried to manually update them, but ended up in an agonizing loop of "Unfortunately, Google Services Framework has stopped" errors. Again, this leads me into thinking that the GApps from that thread aren't working.
I hope I'm posting this at the right place. I have to start off by saying that I'm almost a complete noob regarding rooting and things that have to do with it. I rooted my phone about 6 months ago I think and the reason why I did that was only because I wanted to be able to freeze down some apps with titanumbackup. Since it's been such a long time ago I've forgotten almost all those steps I did when I rooted my phone.
Anyways back to the issue. So today I got a notification from SuperSU saying that it needed to update. I didn't think too much about it so I just followed the notification and updated it. When I started SuperSU I got 2 choices. Either updating normal or by TWRP/CWM. The dumb me just pressed TWRP/CWM for no reason and the phone rebooted into recovery mode. A lot of text started scrolling down at the bottom left corner and when it finally stopped it said something along the line with update failed. I pressed "reboot the system now" from the list and after that my phone rebooted. The samsung logo popped out as usual but after that the screen was completely black. Then I got a lot of popups telling me that this and that app stopped working. Contacts stopped working, whatsupp stopped working, messenger stopped working etc. Like all the apps stopped working.
So I've been trying to google a solution to this but it doesn't seem like someone has had the exact same problem. I've been trying to research things about rooting and such again to see if it can help me someway but I don't think I can't fix this problem by doing just that, so therefore I'm writing this to see if you guys can help me since you have waaay more experience than me when it comes to rooting. I've tried flashing CF-Auto-Root-jflte-jfltexx-gti9505 again using odin but the problem stays. I've tried updating to the latest stable SuperSU by downloading the zip file and putting it on the sd card and then using recovery mode but it didn't work either (I got an error E: signature verification failed). So after reading about the error I tried flashing a CWM but everytime I do that with odin I either get a FAIL or I keep getting the messages (Added, removed, added, removed). I download kies to get the drivers but it didn't help. and now when I try to boot into recovery mode my phone just keep rebooting.
I really don't know what to do now guys so I hope you guys can help me out :crying:
My phone:
Samsung galaxy s4 GT-I9505
Rooted with CF-Auto-Root-jflte-jfltexx-gti9505.tar
durantala said:
I hope I'm posting this at the right place. I have to start off by saying that I'm almost a complete noob regarding rooting and things that have to do with it. I rooted my phone about 6 months ago I think and the reason why I did that was only because I wanted to be able to freeze down some apps with titanumbackup. Since it's been such a long time ago I've forgotten almost all those steps I did when I rooted my phone.
Anyways back to the issue. So today I got a notification from SuperSU saying that it needed to update. I didn't think too much about it so I just followed the notification and updated it. When I started SuperSU I got 2 choices. Either updating normal or by TWRP/CWM. The dumb me just pressed TWRP/CWM for no reason and the phone rebooted into recovery mode. A lot of text started scrolling down at the bottom left corner and when it finally stopped it said something along the line with update failed. I pressed "reboot the system now" from the list and after that my phone rebooted. The samsung logo popped out as usual but after that the screen was completely black. Then I got a lot of popups telling me that this and that app stopped working. Contacts stopped working, whatsupp stopped working, messenger stopped working etc. Like all the apps stopped working.
So I've been trying to google a solution to this but it doesn't seem like someone has had the exact same problem. I've been trying to research things about rooting and such again to see if it can help me someway but I don't think I can't fix this problem by doing just that, so therefore I'm writing this to see if you guys can help me since you have waaay more experience than me when it comes to rooting. I've tried flashing CF-Auto-Root-jflte-jfltexx-gti9505 again using odin but the problem stays. I've tried updating to the latest stable SuperSU by downloading the zip file and putting it on the sd card and then using recovery mode but it didn't work either (I got an error E: signature verification failed). So after reading about the error I tried flashing a CWM but everytime I do that with odin I either get a FAIL or I keep getting the messages (Added, removed, added, removed). I download kies to get the drivers but it didn't help. and now when I try to boot into recovery mode my phone just keep rebooting.
I really don't know what to do now guys so I hope you guys can help me out :crying:
My phone:
Samsung galaxy s4 GT-I9505
Rooted with CF-Auto-Root-jflte-jfltexx-gti9505.tar
Click to expand...
Click to collapse
Did you try to just uninstall supersu and redownload it from the play store?
Lennyz1988 said:
Did you try to just uninstall supersu and redownload it from the play store?
Click to expand...
Click to collapse
When I boot up the phone the screen is totally black. The only thing that shows are those popups (a lot of them) that tells me that this and that app stopped working. :/
durantala said:
When I boot up the phone the screen is totally black. The only thing that shows are those popups (a lot of them) that tells me that this and that app stopped working. :/
Click to expand...
Click to collapse
Right now I don't see any other choice than flashing a stock rom.
Or you could try reflashing the recovery.
Make sure you are using the back USB ports and the original cable. Odin is quite sensitive with this.