Related
Hey NOOKERS!
Got my wife a nook for Mothers Day. Had to fly out of the country the next day and never got around to doing more than charge it up for her.
She does not want to touch it until I can "hack" it to allow it to be an android tablet with both B&N books and Kindle, plus of course all the web browsing / music playing stuff.
I'm fairly comfortable, having messed with both my Samsung Moment and my Epic too.
But -
Is there a guide? Step by Step to go from a STOCK 1.2 device to Cyanogenmod7, and then back again if she hates it and I need to return it?
Interested in getting an answer on this too, particularly if there is a way to reverting back to stock, even tho I already rooted with manual nooter then flashed CM7.....
And so I guess... we WAIT.
Bigjohn_S said:
And so I guess... we WAIT.
Click to expand...
Click to collapse
Getting back to stock should be as simple as building a CWR bootable SD card with one of these images:
http://mrm3.net/nook-color-updated-clockwork-recovery-bootable-sd/
Then booting into CWR, formatting the applicable partitions, flashing the stock 1.2 Rom that's been posted in this thread:
http://forum.xda-developers.com/showthread.php?t=1050520
Now, I'm pretty new to this stuff, but I think that should work. I installed Phiremod on my NC this weekend following the above procedure.
Thanks for the links, and I'll surly look at them - but I can't afford an "I think it should work".
I need steps that WILL work (unless I pour coffee into it while I'm doing the process...)
You should install CM7 on a bootable SD card. http://forum.xda-developers.com/showthread.php?t=1000957
If you don't like it, remove the card, and you are back to stock.
Bigjohn_S said:
Thanks for the links, and I'll surly look at them - but I can't afford an "I think it should work".
I need steps that WILL work (unless I pour coffee into it while I'm doing the process...)
Click to expand...
Click to collapse
Post #4 from my second link gives instructions:
http://forum.xda-developers.com/showpost.php?p=13200403&postcount=4
Basically same thing I told you.
Ok. trying it from an SD card.
Question - if I want to go ahead and Root/Install this to the NOOK itself, can I somehow keep all the setup that wife does to the OS on the SD card?
I can wright a guild tonight some time and post it up I have done this a ton of times back and forth from 1.2/cm7 and dual booting cm7 and 1.2 lol my nook has been all over the place... lol I'm a flashaholic
Thanks to all who contributed!!!
n0xx187 said:
I can wright a guild tonight some time and post it up I have done this a ton of times back and forth from 1.2/cm7 and dual booting cm7 and 1.2 lol my nook has been all over the place... lol I'm a flashaholic
Click to expand...
Click to collapse
Looking forward to seeing it!
Wife is loving it, but now I guess I want to take what she's been playing with and put it on the "device" instead of the SD card, so she can use the SD card to store music and other stuff.
But I really do need the "set it back to normal" capability too, so that if the damn thing messes up horribly some how I can get it warranty repaired. I just don't have that kind of free $ to "throw it away"...
@n0xx187 -
Any update on your little guide?
Thanks!
Hey amigo... just checkin in to see how that guide is coming!
I'm looking forward to seeing a guide as well since I've forgotten the steps I took with my Nook pre-1.2, and am ready to install CM7 on a Nook for my friend.
For instructions on how to install CM7 on your internal drive in the Nook (EMMC):
http://forum.xda-developers.com/showthread.php?t=1030227
Also contains a link to the directions to restore your nook to stock 1.2 (there is a different guide for previous revs, but you said 1.2):
http://forum.xda-developers.com/showthread.php?t=1050520
The two zips linked there differ in that 1 uninstalls CWM assuming you have it flashed to EMMC, and the other doesn't.
I've used both guides (installed CM7 to EMMC, reverted to stock 1.2 and removed CWM, installed a different nightly of CM7, etc) and they are straightforward and take you every step of the way as long as you understand the terminology involved (emmc vs SD) and can follow directions without skipping steps.
If you are wanting to dual boot that is a completely different beast and there are threads for it in the Development sub-forum here.
Just a caveat - you won't be able to use the B&N native ereader app in CM7, and the nook for android app is having some issues right now that haven't been corrected yet (menu insensitivity, some people report that syncing to their library is failing), so if that's important to your wife that's a consideration vs rooting stock B&N (that in and of itself has issues just like any of the roms for the Nook Color, you can read up on them in their own threads (manual nooter, mini nooter, autonooter, etc))
angomy said:
For instructions on how to install CM7 on your internal drive in the Nook (EMMC):
http://forum.xda-developers.com/showthread.php?t=1030227
Also contains a link to the directions to restore your nook to stock 1.2 (there is a different guide for previous revs, but you said 1.2):
http://forum.xda-developers.com/showthread.php?t=1050520
The two zips linked there differ in that 1 uninstalls CWM assuming you have it flashed to EMMC, and the other doesn't.
I've used both guides (installed CM7 to EMMC, reverted to stock 1.2 and removed CWM, installed a different nightly of CM7, etc) and they are straightforward and take you every step of the way as long as you understand the terminology involved (emmc vs SD) and can follow directions without skipping steps.
If you are wanting to dual boot that is a completely different beast and there are threads for it in the Development sub-forum here.
Just a caveat - you won't be able to use the B&N native ereader app in CM7, and the nook for android app is having some issues right now that haven't been corrected yet (menu insensitivity, some people report that syncing to their library is failing), so if that's important to your wife that's a consideration vs rooting stock B&N (that in and of itself has issues just like any of the roms for the Nook Color, you can read up on them in their own threads (manual nooter, mini nooter, autonooter, etc))
Click to expand...
Click to collapse
Thanks. The wife has hundreds of KINDLE books, has yet to buy one from B&N. The purpose of this process is to enable BOTH on this cool little device.
And the "guide" we've been looking for is "How do I take what's installed on the flash card" (she's been using CM7 from a 2gb flash) and MOVE it to the EMMC. (and of course, return it to stock if something goes wrong in a horrible way.)
John
Bigjohn_S said:
Thanks. The wife has hundreds of KINDLE books, has yet to buy one from B&N. The purpose of this process is to enable BOTH on this cool little device.
And the "guide" we've been looking for is "How do I take what's installed on the flash card" (she's been using CM7 from a 2gb flash) and MOVE it to the EMMC. (and of course, return it to stock if something goes wrong in a horrible way.)
John
Click to expand...
Click to collapse
Ah, I had read your OP and assumed things hadn't changed (my bad, read further down and saw that you installed CM7 to SD).
In this case, you could use Titanium Backup to back up all the apps + app data and restore them to the new install on EMMC - I wouldn't back up system data however. It would require minimal re-setup (cyanogenmod settings, some system settings) but would retain launcher settings (desktop, status bar, dock, etc) because the app info would be saved in a backup. You would have to copy separate user data manually (e.g., transferring folders in USB storage mode to your PC and back to your Nook after installing CM7).
I do not know if a nandroid backup / restore would work if you are switching from CM7 SD to EMMC. I prefer using TiBu since youc an choose to transfer only apps + app data on a fresh CM7 install.
dsf3g said:
Now, I'm pretty new to this stuff, but I think that should work. I installed Phiremod on my NC this weekend following the above procedure.
Click to expand...
Click to collapse
If you're running a NOOK Color with 1.2, didn't you run into "error formatting /data"? If so, how did you get past it?
Mine came with the original 1.1 firmware., which I updated to 1.2 from the downloaded file...
but I am hearing things about re-partitioning and things on new ones... does that impact "upgraded" ones?
Newbie here - used search feature, searched across forums. Did not find my problem addressed.
Putting CM7 on wife's NC 1.2.0. Followed huskermania's steps exactly. Everything installed fine until I got to the part where I selected format data. Then I received message, "error formatting data!" Everything stops right there and I have to power the unit down.
Re-downloaded the file twice - went through the complete process two times across several different times so as to avoid frustration causing more trouble! Using a Sandisk 8g class 4 card.
Using 7zip, cm7.0.3, and win32diskimager, and google add-ons, downloaded as directed by the husker dude.
In one section of his video, Huskermania moves files to the mSD - his files are shown as yellow folders. Mine show up as a small stack of books. When I look at the properties of my files, they are winrar zip archive files.
Please help! I'm so close!!
Thank you,
Jim
I believe your issue has been addressed more than one, maybe not exactly the same but pretty close.
Anyway, your NC is v1.2.0, often called "blue dot" which B&N decided to change the partition mapping, used to be 1GB /data & 5GB /media in v1.1, now be 5GB /data & 1GB /media in v1.2.0.
If you don't have a bootable uSD card with CwM Recovery 3.2.x.x or above, it will give you that error "cannot format /data". However, in my specific case, I did have the issue but my NC actually continued to next step, not hung and no need to force reboot.
I suggest you get the newer CwM (v 3.2.0.1) and give it a try again.
Votinh,
Thank you for your reply. As I learn, I am finding that sometimes I don't understand what to ask to find the solution!
I will try this today and report back.
Thank you again,
Jim
Wait!
I checked the version of the file I had used to install cwr and it is 3.2.0.1 - the same file that I was encouraged to try. To be more precise, it is "recovery-clockwork-3.2.0.1-bravo.
So, I'm still stuck.
HELP!
Thank you,
Jim
Can't offer anymore help, m8 but I don't think you should be panic.
If I were you, I would try to re-partition/re-format to 1GB /data 5GB /media, then using CwMR v3.0.2.8 and try again.
Great! Now, can you tell me how to do that?
Thank you,
Jim
I would suggest reading This first. Important info if you are going to muck around in the internal memory partitions.
Then I would go Here and see if this will help.
If not, This, This, or This might be your next best steps as far as reading and/or trying.
Also, This Sticky could shortcut you to the solution you need.
All these links go to XDA threads here in the Nook Color forums. They aren't all the recovery threads, but most of the more recent ones that could help you.
I haven't had to deal with what you're trying to handle, but this should be a great start/solution to solving your problem.
It's gonna take some reading and absorbing to comprehend what you're trying to accomplish, given the level familiarity you seem to have with your device and it's internal file structure.
(I mean no slight by this, the fact that you are here trying to learn and figure out your issue says much - welcome to the community btw )
Tcandroid,
Thank you for your input. I solved the problem by following votinh directions about partitioning. I'm finally up and running cm7!
Two concerns remain:
1. Do I need to worry about OTH updates from barnes and noble messing up my efforts? My hunch is no, just want to make sure. If so, how do I turn that off?
2. Can I over clock to 950 with what has already been installed, or do I need to download and install something else?
Thank you all so much!
Jim
Jim1970 said:
I'm finally up and running cm7!
Click to expand...
Click to collapse
This put a smile on my face, i'm glad to hear you got your issue resolved.
Nothing worse then having a wonderful piece of technology right in your hands that you can't use.
I have no doubt you are going to have a blast with it.
Cruise through the 'themes and apps' subforum here in Nook Color Forums, and you'll find some gems that are out there in the market.
I am not sure about the answers to either of your questions, but I do know that:
Some people have had to do some funky things to block B&N updates, and there have been conflicting answers on this. Again, only have seen in passing - so not sure what the whole story is here.
B&N doesn't push updates that often, so it's likely you have some time to figure this out.
I see people mentioning overclocking to 1200 a lot, so 950 shouldn't put too much stress on your machine. Depending on what version of CM7 you are running, you shouldn't use an external app to overclock. I've been using mine at the standard 800 and can play games like Samurai 2 (with chainfire installed) and it's no problem for the machine.
If your CM7 version provides you overclock settings, use those and not an outside app like SetCPU.
Some random info gleaned from browsing through this forum. Not too specific in addressing your query, yet maybe helpful in your continuing Android education.
Jim1970 said:
Tcandroid,
Thank you for your input. I solved the problem by following votinh directions about partitioning. I'm finally up and running cm7!
Two concerns remain:
1. Do I need to worry about OTH updates from barnes and noble messing up my efforts? My hunch is no, just want to make sure. If so, how do I turn that off?
2. Can I over clock to 950 with what has already been installed, or do I need to download and install something else?
Thank you all so much!
Jim
Click to expand...
Click to collapse
I help many people in many threads and tend not to remember the OP's original issue, so I have to re-read again
Firstly, congrats to you, do enjoy the NC running CM7. I bet by now, you are not a noob or newbie anymore, experience learnt.
Secondly,
1. since the NC is running CM7 ROM now, you don't have to worry about anything from B&N, even their new release probably won't be as good as the CM7.
2. by default, CM7 comes with kernel that can be overclocked to 925MHz (at least true on the v123 nightly build, not sure the latest) and again, it runs at 800MHz by default. You can set it under ??? (not on top of my head now and I don't have the NC in front of me, will update later).
If you want to run faster than 925MHz, you must install Dalingrin latest work - build on 06302011. Be sure download the "emmc" version since you run the CM7 off the internal memory.
I have an autonooter nc 1.1. have been really happy with it, but I am wanting the ability to use netflix as well as have adobe flash. autonooter was easy enough for a n00b like me. however, i have been debating for the last month whether to go up to 1.3 and run manual nooter. It seems intimidating compared to autonooter. Also it is my understanding I need to wipe my nc first then do the 1.2 and 1.3 updates, then nooter. Is wiping as simple as doing the 8 reboots? is manual nooter much simpler than it seems at first read?
I keep seeing ADB in threads and I am wondering if it is something I should have on my laptop? I had tried to get it on my desktop but something didnt work. my laptop is new and my nook has never been connected to it, can i try to install the ADB drivers or do I need to have had my nook connected at least once before doing so? I am interested in learning more about the dev side, though i have never been a dev in any way. but it seems to me having ADB would allow me to do things on that end.
any advice would be great. also if i run into questions while nootering would i post them here or in the other forum? for simple things like what does this or that mean id assume to post here, but if i get stuck in a step would i just post it in the nooter thread?
I can't really say much for the nooter root methods, but having and being familiar with adb is a great tool to have in the toolbox. Not just for the nook, but other devices (once you get a taste of this stuff, it only gets worse).
For the NC it is easy enough. Assuming you're on windows, run the android sdk installer, and download the appropriate packages. The NC doesn't work by default, but if you search for adb on the forums here, there is a post by xboxexpert (or however he spells it) with a batch file that takes care of what you need.
Sent from my HTC Vision using XDA App
i actually used that method when installing on my desktop. something didnt work right and i couldnt get it figured out. soooo i guess ill start fresh with ADB on the laptop and hope somehow it goes better. I am using windows 7 now, my other machine was xp, maybe that will make a difference. right now I am wiping the nook and trying to decide between nooter or cm7. im also trying to decide if I want to boot from a card or flash to emmc. too many choices and too much reading I may have been better off not researching all the different things to do. since now I seem to be more confused than when I first came here , oh well here goes nothing.
Nah. More reading = better informed = less mistakes & better choices
Just don't forget about that search button!
Sent from my HTC Vision using XDA App
miss_october said:
i actually used that method when installing on my desktop. something didnt work right and i couldnt get it figured out. soooo i guess ill start fresh with ADB on the laptop and hope somehow it goes better. I am using windows 7 now, my other machine was xp, maybe that will make a difference. right now I am wiping the nook and trying to decide between nooter or cm7. im also trying to decide if I want to boot from a card or flash to emmc. too many choices and too much reading I may have been better off not researching all the different things to do. since now I seem to be more confused than when I first came here , oh well here goes nothing.
Click to expand...
Click to collapse
You'll probably find win7 a bit easier with ADB that xp. And having a good working install of ADB will most likely save your butt in the future. Biohazard is right....soooo much to learn! And you will notice it's kinda slow booting from uSD than eMMc.
Have fun!
skeeterpro said:
You'll probably find win7 a bit easier with ADB that xp. And having a good working install of ADB will most likely save your butt in the future. Biohazard is right....soooo much to learn! And you will notice it's kinda slow booting from uSD than eMMc.
Have fun!
Click to expand...
Click to collapse
actually im having the same problem with windows 7 as i did with xp. i posted in the thread for adb driver installation so hopefully someone will help me get it worked out. im sure its something simple i am just not seeing, thanks for the advice
miss_october said:
actually im having the same problem with windows 7 as i did with xp. i posted in the thread for adb driver installation so hopefully someone will help me get it worked out. im sure its something simple i am just not seeing, thanks for the advice
Click to expand...
Click to collapse
PM me if you don't get what you are looking for. I believe I may still have the files.
miss_october said:
actually im having the same problem with windows 7 as i did with xp. i posted in the thread for adb driver installation so hopefully someone will help me get it worked out. im sure its something simple i am just not seeing, thanks for the advice
Click to expand...
Click to collapse
If I remember right... I replied to you in the other thread.
DizzyDen said:
If I remember right... I replied to you in the other thread.
Click to expand...
Click to collapse
yes you did and i have replied
Hi everyone. I'm a long time computer builder/hacker and am just getting into the Nook Simple Touch and rooting. I see that 1.1.2 just came out.
-Should I update to that firmware and them root?
-Will current rooting techniques work with the new firmware?
-Is it possible and easy to unroot?
Thanks in advance for your help. I have done some searching but am having trouble finding the answers and dont want to waste even more time. I hope you understand and I can't wait to get into this rooting thing!
Guyman2 said:
[...] -Should I update to that firmware and them root?
Click to expand...
Click to collapse
The update incorporates wifi fixes that can be useful if you use it on the road, or suffer a router that v1.1.0 had problems with. I'd recommend it, yes. I haven't seen any downside.
-Will current rooting techniques work with the new firmware?
Click to expand...
Click to collapse
Yes. I did a complete wipe on mine running v1.1.0, updated to v1.1.2 and used the normal TouchNooter 2.1.31 process. Everything worked exactly as it did on v1.1.0, including having to wait 24 hours for the Market to activate.
-Is it possible and easy to unroot?
Click to expand...
Click to collapse
Hmm. I had no problem wiping and reloading mine. Not sure if that constitutes a 100% unroot, but I think it does. I had no problems.
Thanks in advance for your help. I have done some searching but am having trouble finding the answers and dont want to waste even more time. I hope you understand and I can't wait to get into this rooting thing!
Click to expand...
Click to collapse
I just made a point of following Gabrial's instructions in the first post, and everything went smoothly. If you have reasonable expectations, the NST rooted is a great little device. I think you'll be pleased.
[EDIT: Since writing this, I began having problems searching in the Android Market. I rolled back to B&N v1.1.0 and re-rooted, and STILL am having that problem. I don't know why this only started recently, and I do not think it's related to v1.1.2, but I wanted to post it here as fair warning. Also, after rooting using TN, the device info screen showed 1.1.0 after having updated to 1.1.2. I'm changing my recommendation to "do it if you're having wifi issues" for now.]
Thank you for such a wonderful and detailed post. My micro SD card should be here tomorrow and I cant wait to root it. I have a gmail account but not a youtube. Is it imperative to link gmail and youtube to root this? I would post in that thread, but as a new user i have to wait for 10 posts to do that. Thanks!
Wonderful. Since I had a mishap when screwing with framework-res.apk, I am going to do a full wipe. This is cool!
Guyman2 said:
Thank you for such a wonderful and detailed post. My micro SD card should be here tomorrow and I cant wait to root it. I have a gmail account but not a youtube. Is it imperative to link gmail and youtube to root this? I would post in that thread, but as a new user i have to wait for 10 posts to do that. Thanks!
Click to expand...
Click to collapse
YouTube and Gmail are linked -- or at least can be. Go to YT in your desktop browser, and you should be able to sign in using your Gmail credentials. (Google is assimilating EVERYTHING!)
You do need to link to Google for Market functionality, so yes, you probably do need to do it in practical terms.
---------- Post added at 11:33 AM ---------- Previous post was at 11:32 AM ----------
brendan10211 said:
Wonderful. Since I had a mishap when screwing with framework-res.apk, I am going to do a full wipe. This is cool!
Click to expand...
Click to collapse
The "8 failed boot" process should let you reload the default firmware your unit shipped with if you need to get out of a bootloop situation.
Just a reminder that a FULL IMAGE BACKUP is strongly recommended before you start monkeying with too much, ideally on Day One. Unlike other NOOK devices, you can badly, if not permanently, screw up a NST if you wipe out some system information. Be sure to read through the various threads before going too far!
So I should restore my nook to factory? Will that do anything to the partitions?
brendan10211 said:
So I should restore my nook to factory? Will that do anything to the partitions?
Click to expand...
Click to collapse
If you're stuck, it's an option. My understanding is that:
The "8 failed boots" procedure will restore the firmware your NST shipped with.
The "Unregister and Wipe" procedure from settings will wipe all user data off the internal system.
I was not able to manually update from v1.1.0 to v1.1.2 if previously rooted. Not sure if that's normal, but I had a lot of cruft on my unit, so just did both procedures. Files on my uSD were untouched.
I'm following your guide and see that making a backup is recommended. I would post in that forum, but as a new user here, i am not allowed to there. they say to follow these instructions:
BACKUP/RESTORE N2E Win7
Grab a copy of Roadkil's free DiskImager for backup and restore.
and a copy of free MiniTool Partition Wizard at:
Boot nook with noogie.img : nookdevs.com/NookTouch_Rootin (the "Rooted Forever" screen) and connect to your computer via USB.
Use DiskImager to copy your Nook partition to a file, being sure to select "Physical Disk" in the drop down list.
http://forum.xda-developers.com/showthread.php?t=1142983
However when i follow this step I get to a link that doesn't work. Thus I cannot backup my nook:
Boot nook with noogie.img
Any ideas? Thanks. Again, I'd post the link that wont work but the damn forum wont let me post outside links until i do 8 more posts. This is frustrating as HELL. But you should be able to find out what my problem is from the details i am so kindly allowed to post.
Or maybe I shouldnt bother backing up, since as another user pointed out, after a few failed boots it automatically will store its original firmware. What do you guys think?
You need to be sure that you use a program to write noogie.img to an SD card (I'll post a link to one when I have time), and be sure that you do not write the image to the SD card when it is in the Nook! You need to use an external card reader. After that, you just turn your Nook off, put the SD card into your Nook, and turn the Nook on.
Thanks guys for taking time to make these posts. This should help me in figuring all this stuff out.
so do i need to root the nook BEFORE backing it up? isnt that what noogie.img does?
A quick update: There do seem to be some annoyances if using existing TouchNooter versions to root B&N 1.1.2. If you haven't already done so, and aren't suffering from the wireless issue, you might hold off a bit until the exact implications are better known.
If you've already done it, it shouldn't be the end of the world either.
---------- Post added at 10:03 AM ---------- Previous post was at 10:02 AM ----------
Guyman2 said:
so do i need to root the nook BEFORE backing it up? isnt that what noogie.img does?
Click to expand...
Click to collapse
No. Noogie just exposes the normally inaccessible NOOK partitions so you can back them up. Noogies doesn't root anything. It's recommended to make a backup of your pristine device BEFORE rooting, in case anything goes wrong.
Thanks! How do i get noogie.img? the link on the backup page doesn't work and I dont want to get the wrong version. Any idea how long it takes for the next rooting version to come out?
Guyman2 said:
Thanks! How do i get noogie.img? the link on the backup page doesn't work and I dont want to get the wrong version. Any idea how long it takes for the next rooting version to come out?
Click to expand...
Click to collapse
It does look like the download link to noogie.img.gz is broken, even on the redirected Nook Devs page.
Yeah, that article is removed. Does anyone have a noogie.img they can slap in dropbox public?
Man, they dont make this easy. The direction suck, links aren't working, sheesh. Unlocking the original iPhone was easier! I sure hope this gets updated somewhat soon.
I have noogie.img somewhere on my PC, I'll get it uploaded in about an hour.
Thanks, i hope you can find that file. Since the directions are so vague, do i need a special program to put the file onto an SD card? Or just drag and drop? Thanks. I really hope to get this completed soon.
bobstro said:
It does look like the download link to noogie.img.gz is broken, even on the redirected Nook Devs page.
Click to expand...
Click to collapse
hi bobstro,
i tried restoring my backup to my nook to update it to 1.1.2. i followed everything as said in http://forum.xda-developers.com/showthread.php?t=1142983
but after the restore process, my nook still has the android but it is as it was in the beginning, i mean like a fresh rooted nook(all apps gone).
is this supposed to happen? is it ok, if i update my nook with android in it?
Guyman2 said:
Thanks, i hope you can find that file. Since the directions are so vague, do i need a special program to put the file onto an SD card? Or just drag and drop? Thanks. I really hope to get this completed soon.
Click to expand...
Click to collapse
You don't need to follow those instructions, it's all automated now. You only need noogie.img to create a backup now. Now to find that image...
Edit: Here you go!
Hello all ...
Please .. I need some advice..
This is my first post. My sister has given me her Nook Simple Touch Glowlight. I would like to root it, as I've been looking for a device to keep notes and stuff on. I went as far as booting up with noogie.img and backing up the firmware. I don't know what to do, because I read that having a certain firmware changes everything? I don't think my sister updated the nook. Here is the information from the Settings / Device Info / About Your Nook.
Software Version: 1. 1. 5
Model Number: BNRV350
I read someplace that the sizes of the firmwares are different. The simple touch is 1. 82 and the simple touch glow is 1. 86.
Mine is 1 .82, but yet it has the glowlight? It says to hold the button down for two seconds to turn it on.
I see that B&N have new firmware for the nst & nstg. 1. 3 I believe. It said on the site that this firmware would be installed when the nook is idle. (via wifi) Anyway, I'm wondering if it would be ok to go ahead and root the thing, or upgrade the firmware first to maybe - 1. 2 (if I can find it?) before I do anything else? Oh and should I stay away from B&N's new 1. 3 firmware?
Thank You Very Much !!
WillyS.......
If you indeed have the Nook Simple Touch with Glowlight (black bezel), then the most recent stock firmware is 1.2.1 which can be downloaded here. I would recommend that you update to this as the first thing you do. Next you need to decide which of the multitude of rooting methods is best for you. You need to take into account what you wish to achieve by rooting the Nook and your skill/comfort level with the processes. I have followed many of the different processes, doing a factory reset between root versions. By far the easiest is Nook Manager. I, personally, prefer the Minimal rooting - back to basics method because it allows you to install just what YOU want. However, this method requires a fair amount of command line work.
EDIT: I made the assumption that you are in the US and have a US model. I believe there is a different firmware number for the international model. In any case, you should update the Nook to the most recent firmware before rooting.
Rooting nook .. Glowlight ..
Hello David and Thank You kindly for the reply!
Yes, mine is a Canadian version and it has the black bezel.
Thank you .. for correcting me on the firmware. I was looking at the wrong Nook version. (nook.barnesandnoble.com/u/software-updates-nook-glowlight/379004086)
I downloaded the correct 1. 2. firmware for the nook and I (like you) would rather install what I want to and have more control over what gets put on it. After I update the firmware, I'll come back and follow the links you provided. If you know what threads have the latest / newest info on rooting the nstg, can you please point me to it? (If you haven't already) Thank You Very Much for your help .. David.
Cheers
WS
You're welcome. If you are comfortable with a lot of manual, command line manipulation, start with the Minimal rooting - back to basics thread. There are many more and newer rooting methods, but each of them installs a bunch of apps that the creators use, which may or may not be of importance to you. If you start with the Minimal rooting - back to basics, you can then pick and choose the apps and modifications you want to apply to give you the best experience for YOUR needs. I am attaching the document I use to keep track of what I have done for your reference. Feel free to post any questions here.
Rooting Nook STG .. Firmware 1. 2 ...
Hi David and Thank You for the reference document.
Last night I downloaded 1.2.1 firmware and dumped it on the Nook. When I got up this morning I checked and 1.2 is installed. I looked around and found a 16gb Kingston (from GPS) SD-Card. It is only class 4, but it should be usable for the time being. I'll take a look online for a class 10. I don't know if there is any size, or class limitations, or not?
I'm at the rooting - back to basics thread. I'm going to read all this stuff over and see if I can figure it all out. Thanks again for your help and the document.
WS...
WillySizard said:
...
Last night I downloaded 1.2.1 firmware and dumped it on the Nook. When I got up this morning I checked and 1.2 is installed. I looked around and found a 16gb Kingston (from GPS) SD-Card. It is only class 4, but it should be usable for the time being. I'll take a look online for a class 10. I don't know if there is any size, or class limitations, or not?
...
Click to expand...
Click to collapse
Class 4 should work just fine. Since noogie only takes ~2GB (if I remember correctly) you don't really need a card any larger than 4GB to use this method of rooting. Having 8GB or 16GB card would be useful if down the road you will make use of the card to backup your Nook ROM & user-content for ease in recovery.
Don't really know where to go from here, or what to do ..
@ digixmax .. Thank You for the info on the SD-card. Good to know info!
@ david0226 .. I went to the page about rooting via the link and I have basic
understanding how / what needs to be done, but I'm not having much
luck finding and using the tools. I went and looked for the file used to
extract the 2 files from uRamdisk, but I couldn't find it. I did some reading
and looking around and found a program called Preboot (I think) by
Intel and it contained bootutil 32/64 and so on. I had to install preboot & then
uninstall it, to get bootutil and then install it. I tried using it to extract
the files, but I kept getting failed messages. Like invalid switch /x.
Invalid switch /v. Invalid file uRamdisk. I know I need to extract out 2
files: init.rc and default.prop. I tried to do so in the "Administrative Command
Window" on Win7_64bit, but it just wouldn't work with bootutil. Not the
one I had anyway. Any ideas? Thanks!
WillyS......
David0226 said:
...
I am attaching the document I use to keep track of what I have done for your reference. Feel free to post any questions here.
Click to expand...
Click to collapse
What extensions does "Extended Power Menu" provide?
Also, which uImage and uRamdisk do you use as uRecImg and uRecRAM?
TIA.
Here are the links to the relevant threads.
Extended Power Menu
Clockworkmod based Recovery post #75, see the entire thread here.
If you are going to do the Extended Power Menu, be sure to do the Clockworkmod based Recovery also or you risk wiping out everything you have done by accidentally hitting recovery in the Extended Power Menu. I you have installed Clockworkmod Recovery and accidentally hit "Recovery", it will just boot to Clockworkmod and give you a chance to back out.
@willys. I will have to look up the software I use and post tomorrow. Sorry I missed your question earlier.
@willys, I believe the program you want is "bootutil" which was written and shared by Renate NST. If you find a post by her and click on the yellow box in her signature, you will find links to the many custom programs she has written for rooting and managing rooted Nook Simple Touch devices.
David0226 said:
@willys, I believe the program you want is "bootutil" which was written and shared by Renate NST. If you find a post by her and click on the yellow box in her signature, you will find links to the many custom programs she has written for rooting and managing rooted Nook Simple Touch devices.
Click to expand...
Click to collapse
Yes, I had to go to her profile and I found it there. I'll do this part first and see how it goes. After that (I think?) I need to get an android program (some kind of Installer maybe?) to do some other work with. Anyway, one step at a time. All for now. Thanks! ... WS.
digixmax said:
Class 4 should work just fine. Since noogie only takes ~2GB (if I remember correctly) you don't really need a card any larger than 4GB to use this method of rooting. Having 8GB or 16GB card would be useful if down the road you will make use of the card to backup your Nook ROM & user-content for ease in recovery.
Click to expand...
Click to collapse
Class 2 and 4 will do just fine, in my case I used 520 Mb microSD card for installing various ROMs, tried quite a lot of them, always worked fine.
Almost done, but need a little more help . . .
Mnurlan said:
Class 2 and 4 will do just fine, in my case I used 520 Mb microSD card for installing various ROMs, tried quite a lot of them, always worked fine.
Click to expand...
Click to collapse
OK .. Thank You Mnurlan!
@David0226 ...
Just getting to the point where I'm ready to add programs. have edited uRamdisk and re-installed the two files. I've download android-sdk package and have installed it. I have been in the nook via wifi using ndb shell as root. I am now following your notes file. I've created the archive folder on the nook - /system/archive and I've been moving files over from /system/apps folder. I got Nook Manager written to the sd-card and I have PackageInstaller.adk from it, but I I'm not sure how I get that onto the nook. When I boot with NookManager, it ask if I want to root. I have already done that and it is working. Should I let it do it anyway?
Thank You!
WillySizard . . . .
@WillySizard ...
Connect to the Nook with adb then exit the adb shell back to your Windows command prompt. Once back at the command prompt, you should be able to install any package using this command ...
adb install {package_name.apk}
Nook Simple Touch Glowlight .. Need advice before rooting ..
David0226 said:
@WillySizard ...
Connect to the Nook with adb then exit the adb shell back to your Windows command prompt. Once back at the command prompt, you should be able to install any package using this command ...
adb install {package_name.apk}
Click to expand...
Click to collapse
Ahhh .. ok. Good enough then. That should get me off and running.
Thank You .. David. Sorry I'm being such a pest.
Me, also
Just paid $5 for a BNRV350 at a rummage sale.
I understand BN disabled the web browser with the current operating system.
I can get a Google search window (by repeated tapping on the "Google" or maybe the "404" or the "that's all" links that appear when I try the "connect to social" settings menu choice for Google. And "find my account" worked when given the Gmail userid (because the keypad on the Nook lacks a period for typing a proper email address, in this view).
And I can get a Twitter login page. Neither works well -- typing even a single letter into the password field resets the page, so it's letter, then tap in the field window, then another letter, then tap in the field window. Sometimes it shows a row of dots for characters already entered, other times those are invisible but the entries are still there.
Just curious to add to the above fellow's thread for anyone searching for this Nook model number, if anyone has advice or suggestions about making it useful.
Reverting to the original OS to have use of the web browser would be a welcome option, if that's possible. Pointers welcome. Right now this Nook has version 1.1.5 installed -- I gather that's one of the improved versions that killed the stock web browser.