Database Users

MyTouch 4G freezes every time after reboot or factory reset, I'm stuck, please HELP..

Ok, I know I am a noob to android phones and to this forum, but I already spent many hours online researching the problem and didn't find anything that helped.
So, here's what happened:
I got my MyTouch 4G about 2 weeks ago unlocked. I wanted to get rid of a lot of the garbage that came with it, so I followed the steps and successfully rooted it and then removed several of the preinstalled apps with Titanium backup. So far, no noticeable problems.
Then I wasn't happy with how quickly my battery was draining, so I installed Advanced Task Killer, and set it to automatically kill certain apps periodically.
A few days later when I was trying to add a widget to the desktop, I got the familiar to some message "Sorry, com.htc.launcher has stopped working". Everything else was still working fine on the phone. I researched the problem and the first proposed solution to clear the data for the process from Settings/Applications, did not help. The second proposed solution was to do a factory reset. So, I rebooted with volume down + power pressed together and chose factory reset.
After 4-5 min, I got into the welcome screen where I did the initial setup. After this was complete, the phone checked off that everything was setup correctly (apps, widgets, etc). Then it started loading the desktop and the message "loading..." appeared. This is where it froze.
Basically, I can't get past the "loading..." message on the home screen, no desktop ever loads, and I have access to nothing other than the camera key.
I let it stay for hours to see if it will eventuall load, but nothing happened. I also rebooted and tried factory reset many times and it always get stuck at the same point. I tried all of the above with and without a SIM card, with and without a memory card - basically I exhausted all possible combinations but I always get the same frozen "loading..." screen.
Has anyone experienced this problem? I feel helpless rebooting or reseting the phone from the phone itself because it always get stuck. Is there a way to factory reset from a computer?
Thank you so much if you can help me with any advice and Happy New Year!
Vess

Sounds like u deleted something dealing with the launcher. Doing factory reset well not put it back. I would say, do a nandroid backup, flash iced glacier rom. U could just download another launcher, but being that u wiped the phone, u can't even get to market in that state.

esincho said:
Sounds like u deleted something dealing with the launcher. Doing factory reset well not put it back. I would say, do a nandroid backup, flash iced glacier rom. U could just download another launcher, but being that u wiped the phone, u can't even get to market in that state.
Click to expand...
Click to collapse
Hi, thank you for your message. I think you are correct about deleting the launcher and factory reset not fixing it.
But I don't know how to do "nandroid backup, flash iced glacier rom". Could you point me to instructions on that? Sorry, I'm really new to android phones.

I'm on my phone, go to the development section for this rom. You're see iced glacier. Instructions on the first post

esincho said:
I'm on my phone, go to the development section for this rom. You're see iced glacier. Instructions on the first post
Click to expand...
Click to collapse
I did what you suggested but from what I understand to flash a rom I need to be able to boot into Recovery mode, which I can't do either. Every time I choose Recovery I get the "!" screen and I'm stuck. Am I doing something wrong?
Thank you.

vess22 said:
so I followed the steps and successfully rooted it
Click to expand...
Click to collapse
You didn't by any chance install Clockwork ROM Manager, flash ClockworkMod Recovery and then make a Nandroid backup before doing all of this, did you?

shlongwoodian said:
You didn't by any chance install Clockwork ROM Manager, flash ClockworkMod Recovery and then make a Nandroid backup before doing all of this, did you?
Click to expand...
Click to collapse
No sir, I didn't do any of the above unfortunately. From what I understand had I done that, I wouldn't have a problem booting into Recovery mode, correct?

I believe you might still be able to get to what you need via adb. That's not my specialty though, even though I can mash out a few commands and comprehend what I'm doing. It would be remiss of me to guide you any further, but I don't think all hope is lost for you. Search the forums for 'adb' and 'recovery' and let's also see who replies back with some better advice.

Find the raw .img of cw recovery then adb flash_recovery /location/of/recovery.img
If that doesn't work you'll need to use fastboot assuming you updated to eng spl.
Sent from my HTC Glacier using XDA App

sounds like your boot.img is borked.... try flashing one of the many available kernels (make sure it will work with your rom first... if you haven't flashed a rom or flashed a sense based rom then use an HTC kernel if you're running CM or MIUI use a CM based kernel) and then when you get it running read this and understand why task killers are bad FAQ: You shouldn't be using a task killer with Android

Yes, I'm starting to realize that now my only option is to do flash recovery through adb. So, I've spent all night last night trying to understand what adb is. I installed and updated the sdk, but my adb shell doesn't see my phone as a listed device, so I'm stuck at this point. And yes, I read probably 5 tutorials on installing various usb drivers/ modifying sdk ini files/etc to make your computer recognize the phone as an adb device. I tried everything that was suggested but no luck so far.
I've spent nearly 30 hours so far since this whole disaster started and although I haven't made much progress, I've learned quite a few things.
And, no, I won't mess with Advanced Task Killer or Titanium Backup any more, just give me my phone back and working

Are you s=off with eng boot loader, I don't think you will be able to get a stable adb connection with the ROM acting all wonky.
Best bet is fastboot flash recovery
Sent from my HTC Glacier using XDA App

ESKIMOn00b said:
Are you s=off with eng boot loader, I don't think you will be able to get a stable adb connection with the ROM acting all wonky.
Best bet is fastboot flash recovery
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Yes, s=off with eng boot loader. However, I never did a custom ROM flash, so I cannot go to recovery mode from the phone. I thought even for fastboot flash recovery I need an adb connection, no? How else can I do that?
Thanks.

vess22 said:
Yes, s=off with eng boot loader. However, I never did a custom ROM flash, so I cannot go to recovery mode from the phone. I thought even for fastboot flash recovery I need an adb connection, no? How else can I do that?
Thanks.
Click to expand...
Click to collapse
Boot into fastboot and then you should have access to adb. You can then use fastboot to flash clockwork recovery.
There is a STOCK NANDROID RESTORE somewhere in the development section here. Use clockwork recovery to restore that nandroid, boot up and go on your merry way.
EDIT:
download clockwork recovery and save it to c:\android-sdk-windows\tools (or maybe platform-tools, depending on where the fastboot.exe file is located)
CLOCKWORK RECOVERY LINK
power off phone
hold vol down + power
select FASTBOOT
connect phone to computer - let windows do it's hardware detecting/installing thing
open a command prompt and navigate to your sdk tools folder
type this, without quotes "fastboot flash recovery recovery.img"
disconnect phone and power off/reboot/etc
You should now have access to clockwork recovery and be able to flash whatever you want

Phateless said:
Boot into fastboot and then you should have access to adb. You can then use fastboot to flash clockwork recovery.
There is a STOCK NANDROID RESTORE somewhere in the development section here. Use clockwork recovery to restore that nandroid, boot up and go on your merry way.
EDIT:
download clockwork recovery and save it to c:\android-sdk-windows\tools (or maybe platform-tools, depending on where the fastboot.exe file is located)
CLOCKWORK RECOVERY LINK
power off phone
hold vol down + power
select FASTBOOT
connect phone to computer - let windows do it's hardware detecting/installing thing
open a command prompt and navigate to your sdk tools folder
type this, without quotes "fastboot flash recovery recovery.img"
disconnect phone and power off/reboot/etc
You should now have access to clockwork recovery and be able to flash whatever you want
Click to expand...
Click to collapse
Thank you, thank you! You saved my life. Finally a solution that worked for me. God bless you
BTW, I was never able to get adb detect my phone but fastboot did! So, I followed the steps you suggested and it worked. So relieved now
Vess

vess22 said:
Thank you, thank you! You saved my life. Finally a solution that worked for me. God bless you
BTW, I was never able to get adb detect my phone but fastboot did! So, I followed the steps you suggested and it worked. So relieved now
Vess
Click to expand...
Click to collapse
lol, glad I could help! ADB should be working in Clockwork Recovery now, btw.
You should have seen how I freaked out the first time I tried to root my mt3g. I forgot to wipe and it kept freezing on boot, lol.
So what are you gonna do now? Load a custom rom or stay with stock?

Phateless said:
lol, glad I could help! ADB should be working in Clockwork Recovery now, btw.
You should have seen how I freaked out the first time I tried to root my mt3g. I forgot to wipe and it kept freezing on boot, lol.
So what are you gonna do now? Load a custom rom or stay with stock?
Click to expand...
Click to collapse
I just loaded ice glacier 1.1.4 unthemed. To be honest I don't see much difference except that the bloatware is gone, so I'm happy with it. I don't know if it makes sense to go back to stock. My phone is not under warranty. Is there another reason one might want stock?

vess22 said:
I just loaded ice glacier 1.1.4 unthemed. To be honest I don't see much difference except that the bloatware is gone, so I'm happy with it. I don't know if it makes sense to go back to stock. My phone is not under warranty. Is there another reason one might want stock?
Click to expand...
Click to collapse
You make an appealing case for Iced Glacier.
Stock tends to be the most stable and reliable, plus you get OTA updates. Other than that, not much reason. I can tell you from recent experience that my phone gets a gps lock much quicker with stock than with cm6, but I'll do further testing to see if that's really the case.

I'm having a similar problem and I'm following these steps, but not having any luck.
Info on my phone: It's a MT4G that I got just this past week from eBay, worked fine up until this morning. Does not have an SD card and the one I have from my previous phone (Vibrant) is a highly suspect piece of junk so it's not in the phone right now. I was running VISIONary+ on it and had just set it to temp root on boot, but never got it to reboot. I plugged it in to charge this morning, thought it was plugged all the way in (maybe it wasn't? Would that cause this kind of borking?) and the phone froze. Rebooting didn't help. Actually I had pulled the battery, rebooted it, stuffed it in my pocket and then 2 hours later realized it was still on the boot up screen. That's when I got scared. It's running ADW, Superpower, TIBackup and Tasker, but there's no other software I can think of on the phone that might have mattered. Never installed Clockwork or anything like that before, regretting that now.
On the hboot screen I have:
GLACIER PVT SHIP S-ON
HBOOT 0.86.0000
MICROP-0429
RADIO 26.03.02.26_M
eMMC-boot
Sep 27 2010, 11:12:59
Click to expand...
Click to collapse
Going to Fastboot, I can get the phone to be recognized as an HTC Bootloader in my device manager, and I can try and get the recovery.img loaded as was instructed above using adb but it always fails. Output from that is:
sending 'recovery' (8701 KB)... OKAY [471.891s]
writing 'recover'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 473.125s
Click to expand...
Click to collapse
When I try and do recovery, I get a quick flash of a phone with a red exclamation point over it, then black screen of nothing. Booting regular leads to a constant white MyTouch4g screen, no change. Trying Factor Reset leads to the skateboarding androids, no change even after a long time. In any of these cases, I have to pull the battery before I can try anything again.
Did I bork my phone? How the heck did I do that? Is there any way to further save it? Any help you guys could give me would be massively appreciated, thanks in advance.

RedDonkey said:
I'm having a similar problem and I'm following these steps, but not having any luck.
Info on my phone: It's a MT4G that I got just this past week from eBay, worked fine up until this morning. Does not have an SD card and the one I have from my previous phone (Vibrant) is a highly suspect piece of junk so it's not in the phone right now. I was running VISIONary+ on it and had just set it to temp root on boot, but never got it to reboot. I plugged it in to charge this morning, thought it was plugged all the way in (maybe it wasn't? Would that cause this kind of borking?) and the phone froze. Rebooting didn't help. Actually I had pulled the battery, rebooted it, stuffed it in my pocket and then 2 hours later realized it was still on the boot up screen. That's when I got scared. It's running ADW, Superpower, TIBackup and Tasker, but there's no other software I can think of on the phone that might have mattered. Never installed Clockwork or anything like that before, regretting that now.
On the hboot screen I have:
Going to Fastboot, I can get the phone to be recognized as an HTC Bootloader in my device manager, and I can try and get the recovery.img loaded as was instructed above using adb but it always fails. Output from that is:
When I try and do recovery, I get a quick flash of a phone with a red exclamation point over it, then black screen of nothing. Booting regular leads to a constant white MyTouch4g screen, no change. Trying Factor Reset leads to the skateboarding androids, no change even after a long time. In any of these cases, I have to pull the battery before I can try anything again.
Did I bork my phone? How the heck did I do that? Is there any way to further save it? Any help you guys could give me would be massively appreciated, thanks in advance.
Click to expand...
Click to collapse
The instructions above only pertain to a rooted phone. Your phone is not rooted and you dont have eng bootloader. Without superuser access you cant even flash recovery like you were trying. A factory reset didnt fix your problem?
Side note, im an opponent of doing the whole temp rooting only thing cause if you screw something up you dont have access to tools to fix anything, your just screwed if something happens like this.

[Q] Can't boot... have been meticulous... Help please?

This may "wreak of non-search" and I am sorry if it does. While I have searched, the overall panic that one experiences when you suspect a brick and cannot afford to have a brick.... (that, plus a friend purchased this Glacier for me to help me get back on my feet with respect to career/employment, etc., so a good amount of guilt is thrown into this mix)... all prevents me from rationally and methodically searching thread after thread to figure out why I am having the problem I am having.
I will be as precise as possible.
1. Back in Feb., I perm rooted with visionary... then about 2 weeks later, I read that this root was not true radio s=off perm root, so I used adb and the scripts to perm root again--using the wiki as a guide. Saved a copy of the partition 7 bin on my laptop as an added precaution. Also, BTW, I never flashed the engineering HBOOT. It didn't seem essential to do so... PLUS, in almost every guide it warned that this was the most likely chance for one to f*ck up and brick, so in the interest of erring on the side of caution, I skipped that.
2. I kept stock ROM for several weeks after that... just enjoying root and freezing bloatware with Ti, and doing other root-enabled mods... nothing too involved.
3. About 1 week ago, I finally decided to flash my ROM. I had Rom Manager (paid version), and had flashed ClockworkMod Recovery 3.0.0.5. Further, as an FYI, I had/have numerous nandroid backups on the SD, plus several Ti backups of apps/data... even sync'd this with dropbox, so I can access those now (which are not of any help obviously).
4. I first flashed a CM7 nightly build--wiped data and cache, and as far as I know followed the guides precisely. All was well...new ROM worked alright... some bugs, but it was nice to have the new features, etc.. And of course the mental gratification of having 2.3.3 (GB) instead of 2.2.1 (boring old froyo). I updated the nightly maybe 2 times... in each case, I simply flashed without backing up those ROMS or wiping data/cache as they didn't seem necessary, plus I still had all my stock rom nandroid backups on the SD.
5. Then Last night, RC4 came out. I flashed this the same way... no wipe. This morning... after using it for awhile, I started to get forced close problems on numerous apps... and the one that was most bothersome was my Market app... So after trying to Fix Permissions using RM to no avail.... I decided to restore the last nandroid backup of my stock (rooted) ROM. All seemed well while the restore was progressing... I was powered by AC (as always). But when the phone rebooted at the end of the restore, it stayed at the MyTouch splash for a long time... longer than I thought was appropriate (~20 minutes). So, I took out the battery since nothing else responded, and tried to boot into recovery. WHen I tried this, I got 3 quick vibrate alerts, and a blank screen, with the LED flashing every second in an ominous disconcerting way. (!!) Again, I removed battery, then tried to start phone again normally. Same problem.... It won't go past the MyTouch splash.
Since I cannot get into the phone... I am of course panicked... I have ADB on my laptop if needed, but I really am at a loss as to why this happened, and what I can do at this point....
Please, please advise. My utmost appreciation and sincerest gratitude in advance for any assistance.
Thank you!!!
syntropic

syntropic said:
5. Then Last night, RC4 came out. I flashed this the same way... no wipe. This morning... after using it for awhile, I started to get forced close problems on numerous apps... and the one that was most bothersome was my Market app... So after trying to Fix Permissions using RM to no avail.... I decided to restore the last nandroid backup of my stock (rooted) ROM. All seemed well while the restore was progressing... I was powered by AC (as always). But when the phone rebooted at the end of the restore, it stayed at the MyTouch splash for a long time... longer than I thought was appropriate (~20 minutes). So, I took out the battery since nothing else responded, and tried to boot into recovery. WHen I tried this, I got 3 quick vibrate alerts, and a blank screen, with the LED flashing every second in an ominous disconcerting way. (!!) Again, I removed battery, then tried to start phone again normally. Same problem.... It won't go past the MyTouch splash.
Click to expand...
Click to collapse
Can you boot in to the bootloader?pull the battery put it in then hold the power button down and the volume rocker down?
should come up to a white screen.

take the battery out and let the phone sit a little bit. this has worked for others to get into hboot then recovery. Also if you get it going INSTALL THE ENG HBOOT! Can really help you with soft brick among other things.
Sent from my HTC Glacier using XDA App

Can you boot in to the bootloader?pull the battery put it in then hold the power button down and the volume rocker down?
Click to expand...
Click to collapse
No... that is what I meant when I said tried to "boot into recovery". And I got the 3 vibrate alerts and a blank screen, and nothing........

take the battery out and let the phone sit a little bit. this has worked for others to get into hboot then recovery. Also if you get it going INSTALL THE ENG HBOOT! Can really help you with soft brick among other things.
Click to expand...
Click to collapse
Will do... Thank you. DO you have any idea of where I f*cked up here??

Could be a number of things. Like wipe didn't go through completely , bad download, or just random crap out like a few others. Even flashing with the wrong cwr version can less to your issues. Lol like I said could be a number of things. Sorry I couldn't be more helpful.
Sent from my HTC Glacier using XDA App

OK... Good news. I am in now in CWR. BTW, this may have been something that was my mistake to begin with. When I originally tried to boot into Bootloader, I held the volume button UP. I just tried both up and down volume hold while powering on. When I hold volume up, I get 3 vibrate alerts and nothing. When I hold volume down, I go straight into the bootloader/HBOOT.
OK.. So as said, I am now in CWR. What is the best course of action here...?? Can I try to restore my nandroid backup (maybe a different one) of my old rooted stock ROM? Should I do a factory reset (prefer not to, but I submit to the advice of my more skilled android fans)?
Just a point in the right direction, and I think we can put this thread to bed. Thanks a million just for holding my hand while I fixed this....

I would wipe EVERYTHING but the sd card where your backup is, then attemp restoring whatever rom you had last. 2.2 and 2.3 use different versions of clock work and don't remember which 3.0.0.5 went with. So use that last one that booted and then updat clock work to 3.0.0.6 as it will flash both 2.2 and 2.3
Sent from my HTC Glacier using XDA App

syntropic said:
OK... Good news. I am in now in CWR. BTW, this may have been something that was my mistake to begin with. When I originally tried to boot into Bootloader, I held the volume button UP. I just tried both up and down volume hold while powering on. When I hold volume up, I get 3 vibrate alerts and nothing. When I hold volume down, I go straight into the bootloader/HBOOT.
OK.. So as said, I am now in CWR. What is the best course of action here...?? Can I try to restore my nandroid backup (maybe a different one) of my old rooted stock ROM? Should I do a factory reset (prefer not to, but I submit to the advice of my more skilled android fans)?
Just a point in the right direction, and I think we can put this thread to bed. Thanks a million just for holding my hand while I fixed this....
Click to expand...
Click to collapse
What recovery are you using? 3.0.0.5? and you're trying to flash a 2.2 ROM. Thats where the problem lies. See my post regarding this. It's in my signature, the green one.

I would wipe EVERYTHING but the sd card where your backup is, then attemp restoring whatever rom you had last. 2.2 and 2.3 use different versions of clock work and don't remember which 3.0.0.5 went with. So use that last one that booted and then updat clock work to 3.0.0.6 as it will flash both 2.2 and 2.3
Click to expand...
Click to collapse
OK... and neidlinger... I think I read that post before and didn't quite get the full understanding of it.... I grasp now that you can only restore a 2.2 with a 3.0.0.4 CWR.
EDIT: MUSTKll20... Well, you were right... This is not ROM specific. I tried Re-Flashing RC3, which previously worked fine. Now, since I have CWModRec 3.0.0.5, I need to use a 2.3 ROM.... So I thought I would start with this idea. So, I guess, I need to get whatever is corrupt deleted... So my only question thus remains: How do I wipe everything except the SD from within CWR?
And now that there seems to be a 3.0.0.6 which solves this mismatch trap, why would it not be simpler just to reflash the CM7 RC4, then update CWMod, then just see if my original force close issue is even still occurring, and if so, then I would flash/install eng. HBOOT, "Wipe Everything except SD" (btw, does CW have a selection for that? Is that factory reset? Or will a factory reset wipe my SD.... because obviously that would be bad)
I don't really now how to wipe the internal... Except if I had a terminal and used dd, but as much as I am comfortable with Linux, I still do not understand how the SD and the ROM are separated and why, and how, and what shell commands do what to each....
AND THANKS AGAIN SO MUCH YOU GUYS FOR TAKING TIME TO ANSWER MY CRISIS-INFUSED QUESTIONS!

syntropic said:
OK... and neidlinger... I think I read that post before and didn't quite get the full understanding of it.... I grasp now that you can only restore a 2.2 with a 3.0.0.4 CWR.
And now that there seems to be a 3.0.0.6 which solves this mismatch trap, why would it not be simpler just to reflash the CM7 RC4, then update CWMod, then just see if my original force close issue is even still occurring, and if so, then I would flash/install eng. HBOOT, "Wipe Everything except SD" (btw, does CW have a selection for that? Is that factory reset? Or will a factory reset wipe my SD.... because obviously that would be bad)
I don't really now how to wipe the internal... Except if I had a terminal and used dd, but as much as I am comfortable with Linux, I still do not understand how the SD and the ROM are separated and why, and how, and what shell commands do what to each....
AND THANKS AGAIN SO MUCH YOU GUYS FOR TAKING TIME TO ANSWER MY CRISIS-INFUSED QUESTIONS!
Click to expand...
Click to collapse
You can flash CM7RC4, and install 3.0.0.6. That's pretty much the only way you can fix it..
and android phone have a method of using a section of the SD card for their memory banks. I'm not really sure how it works either, but it does. You can wipe the internal w/o wiping the SDcard.
Wiping the phone from with in the recovery image will not touch the SDcard, it will only wipe the internal. You can format the SD card from the Recovery Image, but i'll leave that dog sleep so we do not it accidentally.

last little clean-up question.
Sorry to bump this... last LAST question...
Mustkll20: I realized that you were correct to suggest to wipe everything except the SD... Something is corrupt.
But I am not real sure exactly how to wipe EVERYTHING except the SD, from within CW recovery... Since that is the only mode I have available to me. Once I wipe, I will reinstall CM RC3, then update Clockworkmod Recovery to 3.0.0.6, and then try and download RC4 again using another method, and re-flashing.
I would trial and error this, but do not want to wipe the SD.
Thanks guys... seriously.

You can flash CM7RC4, and install 3.0.0.6. That's pretty much the only way you can fix it..
Click to expand...
Click to collapse
I didn't see your reply... ummm. and I do need to wipe.. Because I have tried to re-flash both RC3 and RC4, and I get what must be a "bootloop": During the CM splash, it stops and then reboots---over and over. It never did that before.... so my problem is something else...
I don't know what else there is besides the SD and the ROM, but whatever it is, I need to delete it. So should I do a factory reset???

Also, are you sure you are holding the volume down and pressing power to boot into recovery? The result you described is what happens when you hold the volume up and press power.

lowandbehold said:
Also, are you sure you are holding the volume down and pressing power to boot into recovery? The result you described is what happens when you hold the volume up and press power.
Click to expand...
Click to collapse
Yep... I know the thread is not for thrillseekers (i.e., its boring), but I mention that I discovered this phenomenon... so I really wasn't in all that bad a spot to begin with.
I still need to figure out how to fix my current problem.... all CM RCs (I can only flash 2.3 ROMs because of CW 3.0.0.5) go into what I guess is a bootloop. In other words, they do not ever boot, just crash and restart. And the RC3 ROM I used worked fine before this... so something else is causing this problem. I need to wipe everything I guess, but I just don't know how... without touching the SD card and from within Clockwork Recovery.

Ok. Go into recovery.
1. Wipe data/factory reset
2. wipe cache partition
Both of these are on the main screen.
Go to advanced
3. Wipe Davlik Cache
Go back to main screen
Go into mounts and storage
4. format boot
5. format system
Try all of that. It will not touch your sd card. After doing this flash the ROM again. Keep us updated and good luck.

lowandbehold said:
Ok. Go into recovery.
{...}
Try all of that. It will not touch your sd card. After doing this flash the ROM again. Keep us updated and good luck.
Click to expand...
Click to collapse
Thank you for the concise and thorough response!!!!!!! Id thank you, but have used up my allotment. get ya tommorow!!

And it worked! Thank you!
But.... ummm.... there is no market app. I would think the CM ROM would have this, but apparently it doesn't. I need to install Ti, etc. to restore all my apps.
Does anyone have a download link or at least a version # that is appropriate?

syntropic said:
And it worked! Thank you!
But.... ummm.... there is no market app. I would think the CM ROM would have this, but apparently it doesn't. I need to install Ti, etc. to restore all my apps.
Does anyone have a download link or at least a version # that is appropriate?
Click to expand...
Click to collapse
You can thank the Google c&d order for that. Go to cyanogenmod.com. there is a link there for the gapps zip.
Sent from my HTC Glacier using XDA App

OK... I thoght Gapps.zip was just Google Docs. Luckily, I had that on my SD card from one of my many ROM downloads. I see why they had to make it separate.
But I am installing it, and everything is great... And I learned a lot too... Which can only mean trouble.
Thanks!

[Q] Can't get into hboot or clockwork?

Search function is down but I did go through a few pages of threads looking for what was going on and no luck but I apologize if this has been solved somewhere else.
First off I would rate my rooting know-how as beginner to intermediate. I've jailbroken/unlocked multiple iPhones awhile back and have rooted/flashed roms on a cliq, mts, my3g, and this mt4g before.
I recently returned my current mt4g back to stock rom and unrooted. I do not think I turned s back on but I should have double checked before.
I currently have root and flashed clockwork and am trying to flash CM7 (I had ran it before on this phone as well). I have an issue right now where I cannot get into clockwork recovery as it will just sit at the mytouch logo forever and if I try and volume up and power into recovery all I get is 3 vibrations and a flashing amber light.
I can boot into the stock (but rooted) rom.
Any ideas? I feel like my recovery is broken or something but this goes beyond what I know. Any help would be great and any information you need I'll be happy to provide.
myTouch 4G, rooted, s (probably) off, stock rom, clockwork says i'm on 3.0.2.4

After reading that, I'm not fully convinced you actually have root and S-OFF. If you're sure you do, download ROM Manager from the Market and use that to install a fresh copy of CWM recovery. Also make sure the "fast boot" option is turned off somewhere under Settings. At that point, there should be nothing preventing you from getting into recovery if you have perm root.

I've got ROM Manager and it has SU permissions and I have the latest recovery flashed but I am still stuck on mytouch logo or the 3 vibrations/amber light when I try to get to recovery. If I reboot there is still no problem getting SU in terminal emulator or ROM manager or anything.
Fast boot is off as well. Thanks for the help so far.
Any ideas?

I don't often boot into recovery manually since most custom ROMs have an enhanced reboot menu with a recovery option, but if memory serves, I believe the key press combination is actually Power + Volume Down, not up like you mentioned in your OP. Give that a try.

Man I am really crazy. Here I am a tmo rep and also a novice modder and I'm hitting power + volume up.
Worked like a charm.. Now just to figure out why clockwork is sitting at the mytouch screen when trying to install CM7.
Thanks for the fresh set of eyes!

breakaway87 said:
Worked like a charm.. Now just to figure out why clockwork is sitting at the mytouch screen when trying to install CM7.
Click to expand...
Click to collapse
After flashing CM7, the phone hangs at the myTouch screen when attempting the first boot?

From ROM Manager if I try to flash CM7 from there it goes to the mytouch screen and hangs before anything else happens.

breakaway87 said:
From ROM Manager if I try to flash CM7 from there it goes to the mytouch screen and hangs before anything else happens.
Click to expand...
Click to collapse
What if you select the "boot into recovery" option in ROM Manager? Does the phone reboot into CWM recovery? (you should see the main CWM menu in orange text)

Boot into recovery takes me to MT4G logo and hangs.

breakaway87 said:
Boot into recovery takes me to MT4G logo and hangs.
Click to expand...
Click to collapse
So you don't have a good installation of CWM. Open ROM Manager again and re-flash a fresh recovery. I think there's an option to wipe your existing recovery beforehand, so if you see that, select it. You need to get a working recovery image before you can do much else.

Deleted current recovery and I confirm my model again and it takes a total of 5 seconds. Trying to reboot into recovery again after and I still hang at MT4G.
I hate it when you know something you need to do but you've been working on it so long you can't come up with new ideas.
Thanks again for the help.

Sorry multipost since it didn't register on my computer the first time for some reason

Yeah sorry man, I've never heard of a situation where CWM stubbornly refuses to install. If you have the engineering bootloader, you could manually flash it that way, but that's my only other idea.

Alright well thanks for all the help man, I'll dig around and pick up tomorrow.

I ended up looking for the recovery myself on the SD card and deleted it and then it flashed no problem. Thanks again for the help

breakaway87 said:
I ended up looking for the recovery myself on the SD card and deleted it and then it flashed no problem. Thanks again for the help
Click to expand...
Click to collapse
Sure, glad you figured it out.

Please.

Guys please I know this is the wrong forum but no one is answering help. At all. Alright, I went to flash the ICS Sense alpha, and needed to restore a backup. I went into hboot, and restored the PD98IMG.zip. Afterwards it said "Press power to reboot" so i did. The phone turned off, and now nothing. After a LONG time the phone turned on to the White HTC Splash and vibrated CONSTANTLY, until the battery was pulled. I tried volume down + power but nothing. Except for the occasional white screen, nothing. Please, anyone/.

You're bricked
Sent from my Desire HD using telepathy...

I think your phone had a bootloop. Did you already installed custom recovery? Can you enter it through fastboot menu (vol down + power)?

I doubt he's bricked,why are you restoring that zip? You restore your back up....from clockwork?
Sent from my Desire HD using XDA Premium App

It won't enter into fastboot. Occasionally the white HTC screen comes on with a constant vibrate and the only way to stop that is to pull the battery. No fastboot, no recovery, nothing.
It wouldnt enter into recovery so I had to take the long way, by using the PD98IMG

HTC_Phone said:
It won't enter into fastboot. Occasionally the white HTC screen comes on with a constant vibrate and the only way to stop that is to pull the battery. No fastboot, no recovery, nothing.
It wouldnt enter into recovery so I had to take the long way, by using the PD98IMG
Click to expand...
Click to collapse
I am confused. So what exactly happens when doing this:
remove or rename the PD98IMG on the sd card
pull the battery from the DHD
re-enter it and hold volume down and power until the hboot starts
navigate by volume down/up to Recovery and press POWER

If you had to restore back to factory, why bother flashing ICS?
You should get away by installing one of the RUU using PC. here is a guide on how to install RUU and you'll have to search this section to find a RUU or google it.
Though firstly i would ask you if you can go into the recovery mode anyhow since you're saying that your phone can get the HTC logo. For that, hold down POWER + volume DOWN key to get you into hboot (IF YOU CAN) and choose recovery from there, once in recovery, go to option where you wipe your data + cache, wipe both of em and try restarting again...If you can't even get into recovery then do the RUU way of getting the rom working.

EDIT:
I'm not sure what in the world happened, but it booted into the ATT stock ROM. After 30 minutes of vibration and idk what else, it finally booted.

Lol least its on
Sent from my Desire HD using XDA Premium App

HTC_Phone said:
EDIT:
I'm not sure what in the world happened, but it booted into the ATT stock ROM. After 30 minutes of vibration and idk what else, it finally booted.
Click to expand...
Click to collapse
Gratz, suppose this thread's unnecessary now?
Anyway take care of what you do: always do a nandroid backup prior to flashing everything. Better spend 5min for backup than 5 days without a phone.

I think know what happens. If I remember correctly you had your phone replaced. And it came with gb. The pd98 you flashed was the froyo one. Hence the crazy vibration and long boot time. If Im right thisvwill happen each time you reboot Until you get the gb bootloader back on
Also spamming the threads is a pretty good way of getting banned. Maybe zel or Andy will be nice about it

marsdta said:
I think know what happens. If I remember correctly you had your phone replaced. And it came with gb. The pd98 you flashed was the froyo one. Hence the crazy vibration and long boot time. If Im right thisvwill happen each time you reboot Until you get the gb bootloader back on
Click to expand...
Click to collapse
That sounds somewhat correct. I DID get it replaced, but had a GB PD98 on the SD card. Anyway, it vibrated for quite some time, and eventually the vibration stopped. So I let the phone sit as I figured out some way to salvage the phone. And the the next HTC splash booted, and the phone proceeded into the stock ROM. Idk what happened, but I'm not complaining.

Dear Lord, it just turned off and is doing it again. But, I'm praying for the best again. Thanks guys.

HTC_Phone said:
Dear Lord, it just turned off and is doing it again. But, I'm praying for the best again. Thanks guys.
Click to expand...
Click to collapse
When you succesfuly back in your phone, just root it with AAHK and install some custom ROM and you should be fine.

motherninja said:
When you succesfuly back in your phone, just root it with AAHK and install some custom ROM and you should be fine.
Click to expand...
Click to collapse
The phone itself is already rooted, but I tried booting into CWM, and it did the same thing as it did before. So I have to run the RUU, and then S on the phone, and run the hack kit again. I already ran the RUU once, and nothing.

Probably best just to start over and do everything again,even if you've already done it,maybe the root didnt work?
Your phones a nightmare mate
Sent from my Desire HD using XDA Premium App

So you intentionally created a thread in the wrong section?
I guess the rules don't apply to you then.

[Q] Rooting Nexus10 - Is losing recovery all the time normal?

I unlocked my Nexus 10 bootloader, then installed the latest CWM, and finally the latest SuperSU, and it's all fine. But it seems that the only way to get into recovery is to first go into the bootloader (hold power, vol up and vol down) then select recovery from there. And when I leave recovery to boot back into the OS (stock - i've not flashed any other roms yet) I get a warning about how stock is going to revert my recovery and lose root, and do I want to try and fix it, and how this cannot be reversed. I select fix it, but next time I try and get into recovery it's not there. Is this normal, or a known problem? Have I done something wrong? I don't want to fiddle around too much and brick my device; it works perfectly and the only reason I did all this was so I could install an app to prevent me from having to connect my N10 to my pc to used ADB over USB - I much prefer doing it all over Wifi!

poldie said:
I unlocked my Nexus 10 bootloader, then installed the latest CWM, and finally the latest SuperSU, and it's all fine. But it seems that the only way to get into recovery is to first go into the bootloader (hold power, vol up and vol down) then select recovery from there. And when I leave recovery to boot back into the OS (stock - i've not flashed any other roms yet) I get a warning about how stock is going to revert my recovery and lose root, and do I want to try and fix it, and how this cannot be reversed. I select fix it, but next time I try and get into recovery it's not there. Is this normal, or a known problem? Have I done something wrong? I don't want to fiddle around too much and brick my device; it works perfectly and the only reason I did all this was so I could install an app to prevent me from having to connect my N10 to my pc to used ADB over USB - I much prefer doing it all over Wifi!
Click to expand...
Click to collapse
Try Quick Boot in the Playstore.

sfobrien said:
Try Quick Boot in the Playstore.
Click to expand...
Click to collapse
I might try that but really I'm more concerned about my recovery going missing when I exit it.

Strange, never seen that and can't reproduce it. I suggest switch to TWRP and maybe custom ROM and see if that corrects the issue.

Is recovery returned to stock or just flat out missing? I haven't had a permanent recovery, stock or non-stock, on mine for some time now though it will still work loading temp recoveries.

mhausig said:
Is recovery returned to stock or just flat out missing? I haven't had a permanent recovery, stock or non-stock, on mine for some time now though it will still work loading temp recoveries.
Click to expand...
Click to collapse
I don't think anything actually happened - it just warned me that it might, and that I could either do nothing, or copy some files into system.
In the end I used TWRP which doesn't have the same problem.
This allowed me to return to my original problem, where I discovered that my game doesn't have a bug; instead, every single Nexus 10 has a problem with multitouch which Google doesn't even acknowledge, let alone fix.