Database Users

jtag help please

can anyone help with the jtag pinouts on a xda i have found the pinouts on an ipaq3600 and have all the relevant software just need help on filling in the peices....thankyou

http://xda-developers.com/jtag/
mmm, why does it not show up in google? I think it was posted before.

nice very expensive rom flashing tool
have had a look at the jtag page very helpfull so you guys have made a very expensive rom flashing tool can you now remove the bios chip and put it into another xda if this is the case you therefore can repair xda and earn quite a lot of money if this is the case is it possible to send you my dead xda for a bios rom swap keep up the good work guys you are nearly there

your sentence seems to be missing some punctuation.
why would it be expensive? a couple of wires and a d25 connector?
you cannot send us your xda, we have enough things to do already.

so in simple terms
so how do i fix a dead xda with no bootloader?

So we found the missing bit for successfully flashing the XDA! Now the drawback is that the pkoe command is not yet present in the jtag 0.4 release. For that reason I created a small patch to version 0.4 that takes care of flipping the bit just before erasing and writing of the flash. You can download the patch here.
The above text is from the jtag info page. Although it says "you can download the patch here", I cannot find the link.
http://xda-developers.com/jtag/

cruisin-thru said:
The above text is from the jtag info page. Although it says "you can download the patch here", I cannot find the link.
http://xda-developers.com/jtag/
Click to expand...
Click to collapse
Hi,
The patch is not there and the page needs some updating. However, in the meantime several new versions of the jtag software have become available at http://openwince.sourceforge.net/jtag/.
Unfortunately I have had mixed results with these new versions. I'm not sure if it is my XDA or the software, but detection has become less reliable and the XDA seems to reset after detecting the flash. If you also have trouble with the new versions I can make a patch for an older version.

To SUPERUSER...
Is there some way to access to this page and learn how to build a JTAG
http://xda-developers.com/jtag/
I hope back to life my XDA and i 'll coment what a heels happened... thanks
:?:

all http://xda-dev/<something> pages have moved to the wiki:
http://wiki.xda-developers.com/index.php?pagename=WallabyJTAG

Hd2 Jtag

Does anyone have any information about the JTAG pinout for the HD2? Thanks.

ashkash said:
Does anyone have any information about the JTAG pinout for the HD2? Thanks.
Click to expand...
Click to collapse
://***.mtkjm.cn/read.php?tid=11962
://***.mtkjm.cn/down.php?aid=35794
It's only in Chinese though...

Humboldt said:
://***.mtkjm.cn/read.php?tid=11962
://***.mtkjm.cn/down.php?aid=35794
It's only in Chinese though...
Click to expand...
Click to collapse
Have you been able to download the pinouts from these links? I tried, but could not get them to download. If anyone can download and post here that would be great. Thanks.

Copy and paste the links in your browser and change the *** to www
You may want to google that and use translation. They are not pictures to download. They are embeded in the posts. Just scroll down.

trotterjerry said:
Copy and paste the links in your browser and change the *** to www
You may want to google that and use translation. They are not pictures to download. They are embeded in the posts. Just scroll down.
Click to expand...
Click to collapse
I can go to the link without a problem, but all I see is a link to download a rar file, HTC_HD2_JTAG_PINOUT.rar and I do not see any JTAG pinout images embedded in the posts. I tried to use translation and register for the site to download the rar file, but could not get anything to download. Not sure what I am missing. Thanks.

Here jtag pigouts
May be can help u
b.r
****n

Is there a scheme JTAG adapter, which could work with the HD2?

I would be also be interested on a JTAG procedure for the TMOUS HD2.
Any news?

yes repair works like a charm
buy riff box by legija or jrt-smti from poland team and repair it
i do 2 pcs today

ORT-JTAG will do unbricking too
Above picture is also taken from ort-jtag.com support page
Best Regards
Oz.

jrt smti
johnnymld said:
yes repair works like a charm
buy riff box by legija or jrt-smti from poland team and repair it
i do 2 pcs today
Click to expand...
Click to collapse
Hy!
You wrote about this jrt-smti stuff.
Please help me a little bit, cause I need it... and I'm in trouble, because my phone is dead, and I need to resurrect it... I'm lost my job, an without a phone, its hard to find a new one...
So as it is explained by You, only this stuff is enough to connect to my HD2.
I've got it, but let me to have some questions:
It this device connecting to the pc via usb?
What do I need in advance?
What do I need to find to resurrect my phone?
Thanks in advance!

HD2 Jtag
Can any one tell me or share a link on what are the things that are recquired for Jtag .

WINNDOWS PHONE 7 ON s2000

Do you think this is possible to take windows phone 7 on my neo touch...

very unlikely, rather impossible unless some smart minds sit together and will port it, if its even possible.

after the so already answered " is it possible to put android on my S200", here comes the new challenger : " can I put Windows phone7 on my S200",
All that written in capital letters ....
so to answer you, maybe one day it will be possible, but before that, you will be at least 1 year older...
Seriously, one very skilled people has managed to make it boot on HD2, but its just the beginning, we need to wait for more ressource, and study on the booting process.
I doubt drivers will work out of the box like for wm6.1/6.5/6.5.5
And that's better this way, I really hope ms has reworked the kernel/memory management...

coolerkrisjanne said:
Do you think this is possible to take windows phone 7 on my neo touch...
Click to expand...
Click to collapse
i hope so.. ^^

ocman said:
after the so already answered " is it possible to put android on my S200", here comes the new challenger : " can I put Windows phone7 on my S200",
All that written in capital letters ....
so to answer you, maybe one day it will be possible, but before that, you will be at least 1 year older...
Seriously, one very skilled people has managed to make it boot on HD2, but its just the beginning, we need to wait for more ressource, and study on the booting process.
I doubt drivers will work out of the box like for wm6.1/6.5/6.5.5
And that's better this way, I really hope ms has reworked the kernel/memory management...
Click to expand...
Click to collapse
For run windows mobile 7 there is not need a capacitive display?

?????
any answers really clear of yes or of not therefore I presume that yes but when someone it will put in job ... it seems to me more judicious to change domage telephone to win have have another OS...

this simple won't happen...it's a hell of a job because crivers need to be created from zero and consider that neotouch have't sold that much ...is already a miracle at this point that we have the manila of the hd2 !

windows mobile 7.0 on Acer F1
Any News about this project ? Installing windows mobile 7.0 on Acer F1 would be great and would re-evaluate this device which it still has a lot to offer in terms on power. Besides in September the new windows 7.5 (Mango) will be out....

And soo? anyone create WP7 for this Acer?

I Was trying toshiba tg01 rom for fun, but phone doesn't boot so bad ... if you can help us ??!
Sent from my Nexus S using XDA App

salemxp said:
I Was trying toshiba tg01 rom for fun, but phone doesn't boot so bad ... if you can help us ??!
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
If any user porting WP7 for this device, then i help....
because i not have acer, etc..

Perhaps you could help us while sharing your kitchen ?
Sent from my Nexus S using XDA App

salemxp said:
Perhaps you could help us while sharing your kitchen ?
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Tell me, when you flash Tsunagi ROM, then what happened?
You flash too bootloader, etc? you have a J-Tag?

I only flash the rom using flash.bin files (acer s200 support this files ). And change nothing to the bootloader. What is j-tag ? The phone don't boot it stay to the acer logo .
Sent from my Nexus S using XDA App

salemxp said:
I only flash the rom using flash.bin files (acer s200 support this files ). And change nothing to the bootloader. What is j-tag ? The phone don't boot it stay to the acer logo .
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Maybe not run, because u not write bootloader.
but you not use this, if u not have a J-Tag ... probably, it can kill the device

bricked
Ok my S200 is definitly dead lol. I bricked the phone (if someone have solution ???). However when i connect the phone to computer, even if the screen of the phone stay blank, zune sofware pop... SO i think it's work but only the GPIOs of the phones is not the same, so screen stay blank, flash led is aways lighting and my sd card has been formated. I can go back, so for me it's finished.

hi nokser
i have J-tag and every thing that is required. can you plz help me to do it ?
just let me know where i must start

khepelesibilo said:
hi nokser
i have J-tag and every thing that is required. can you plz help me to do it ?
just let me know where i must start
Click to expand...
Click to collapse
but you have a Riff Box J-tag?? or maybe other?

it is just a ARM J-TAG programmer. have you any schematic for S200 to connect programmer to it? ( is it possible ? )
it seems
http://gsmserver.com/shop/gsm/riff_box_jtag.php
riff box dont suppurt S200. but i can find it if it is realy required.
my phone is not dead ! is RIFF BOX still required ?

khepelesibilo said:
it is just a ARM J-TAG programmer. have you any schematic for S200 to connect programmer to it? ( is it possible ? )
it seems
http://gsmserver.com/shop/gsm/riff_box_jtag.php
riff box dont suppurt S200. but i can find it if it is realy required.
my phone is not dead ! is RIFF BOX still required ?
Click to expand...
Click to collapse
all is possible, wait i find more info.....

*qhsusb_dload*

Hi Guys,
i bought a Droid Razer M Xt907.i flashed a wrong file now mobile is not starting. but RSD sees it as QHsusb_dload and Does Not Enter in Fast Boot.
Please advice for problem solve, thank you
Sorry for bad english

AQMazari said:
Hi Guys,
i bought a Droid Razer M Xt907.i flashed a wrong file now mobile is not starting. but RSD sees it as QHsusb_dload and Does Not Enter in Fast Boot.
Please advice for problem solve, thank you
Sorry for bad english
Click to expand...
Click to collapse
Hardbrick. No way to restore. Only replacing the phone motherboard will help

if anyone have solution please tell me

AQMazari said:
if anyone have solution please tell me
Click to expand...
Click to collapse
@Shmaks already told you, it's a brick. There have been solutions for other Moto phones, but the files aren't out there for this phone.
Sent from my Nexus 5 using Tapatalk

HELP PLS ! Scatter ZTE Blade v220 ?

Can anyone create me a "scatter.txt" model ZTE BLADE v220? I thin is it: Qualcomm Snapdragon 410 MSM8916
I could not find anywhere one and that's why you are my last hope! My Device is 5 months old and is too good to throw away it.
I get my cell phone only in dfu mode on and my computer dont see my device. Pls help Guys and sorry for bad english. I´m from Germany
.

Have you found it?

Xmezarcix said:
Have you found it?
Click to expand...
Click to collapse
No! you were my last hope, but it has been reported until now none. Now I have are almost new phone and can not use it, because I made an error. There is hardly anything on the subject ZTE Blade v220. I have factory town on the ZTE ball and they wanted almost 100 euros from me can money. for you to buy an almost new. now I have the broken phone back home. I would tip for each or help, grateful! :good:
sorry for my bed English, but i learn ist!

have found it! thanks anyway, people !!!:good:

Barsko said:
have found it! thanks anyway, people !!!:good:
Click to expand...
Click to collapse
Hi can you help me? I need it too, but i can not find it anywhere...
Thank you ...

Sandmann84 said:
Hi can you help me? I need it too, but i can not find it anywhere...
Thank you ...
Click to expand...
Click to collapse
HI! I have it no longer! However, I have my phone now, I'll try to find a video as I make one. then I can send it to you. :good:

Barsko said:
HI! I have it no longer! However, I have my phone now, I'll try to find a video as I make one. then I can send it to you. :good:
Click to expand...
Click to collapse
Oh yes please :victory:

Sandmann84 said:
Oh yes please :victory:
Click to expand...
Click to collapse
hey please sent me the video. i would like to have it please. thanks

Sandmann84 said:
hey please sent me the video. i would like to have it please. thanks
Click to expand...
Click to collapse
So ... I have to correct myself. Even if it is so long ago, I will help other people with my insights. The phone ZTE Blade v220 has a different processor. The Scatter.txt is created for the mobile phones with a MT ... processor and the Zte Blade v220 is a Qualcomm msm8916. At Qualcomm you go a bit different. For this I can recommend you two good tools. I hope it's ok if I link it here.
Here is the first tool:
https://www.youtube.com/watch?v=KVPR13KP0Og&t=143s
This is the second:
You can use it if it does not work with the first!
Download Link:
https://androidmtk.com/download-qpst-flash-tool
How to do it:
https://www.youtube.com/watch?v=Ds2Bp2TBizc
After long researches, these are the two best ways to solve the problem.
I have come to a very interesting teme, under the name "EMMC HARD BRICK BUG",
I would recommend to anyone who likes to be engaged in the flashing.
There is an extra app, which one can test and see if one has such a compromised mobile phone / processor.
So you can go well such problems as this out of the way.
So ... I hope I could help someone! :fingers-crossed: and good luck :good: