Return Legend to stock OS [SOLVED] - Legend General

Hi guys,
I've tried many ways to fix and hope that some light could be shed from you
- Trying to get back to stock build after downgrading to 1.31 via this process wiki.cyanogenmod.com/wiki/HTC_Legend:_Full_Update_Guide
- The ‘rooting tools’ in step 2 of 2nd section were not available anywhere so tried other avenues to root
- None successful
- After lots of playing around – I decided to try and get back to latest stock build
- Ran the uncracking.bat file which was installed during the Cyanogenmod process (which I hoped would restore things)
- Not successful
- I’m thinking that maybe the adb shell command from the Cyanogenmod process may have caused some issue: /data/local/flash_image misc /data/local/misc1-2.img
- Trying the HTC OTA system update (from Android 2.1 to 2.2) fails while trying to update and goes into the recovery screen (red triangle with exclamation mark, black background) <<<<<<<<<
- Then, when pushing vol up and power the following error is shown:-
----> E:Error in /sdcard/download/OTA_Legend_Froyo_S_HTC_WWE_3.15.405.3-2.05.405.2_P_release_1603576x6ndkkwfpxcjvla.zip (Status 7) Installation aborted.
Any help would be greatly appreciated..
Doing a general factory reset does not seem to help.
I do not need to keep any apps or data, a complete wipe so I can start afresh would be great if possible!
Thanks

94 views and no replies.
Oh dear

I tried to return to stock rom by running the wwe rom from shipped-roms only got the error 155. Then extracted the rom.zip from the exe and flash that no go, couldn't work out a way to do it successfully.
Sent from my Legend using xda app-developers app

Cool.. It doesn't have to be stock. All I need is 2.2 or 2.3 (I was trying for cyanogenmod 7.2). At the moment it's stuck on a buggy 2.1!
I'm not sure of the current state, as I said I think going half way through the cyanogenmod kinda of changed something important ( eg. /data/local/flash_image misc /data/local/misc1-2.img via ADB).
Do you know of any way I could make either of these OSs work, with the minimum of hassle?
ranger4740 said:
I tried to return to stock rom by running the wwe rom from shipped-roms only got the error 155. Then extracted the rom.zip from the exe and flash that no go, couldn't work out a way to do it successfully.
Sent from my Legend using xda app-developers app
Click to expand...
Click to collapse

1st thing 1st, unlock your bootloader.
2ndly, once unlocked, flash cwm.
3rd, download any ROM you want (lets pick cm 7.2 for starting point since you said no need for stock ROM) then put into your sd card.
Lastly, boot into cwm. Wipe all (data, cache, dalvik cache) then Flash(install) ROM.
Thats it (assuming your device is not usb bricked or hard bricked and you do all the steps correctly).
How?
To unlock, go to htc web site or google "unlock bootloader+htc dev"
Flash cwm? Go to dev section, theres a thread of cwm, follow "s-off" method (of course after unlocking your BL.
Boot into cwm? Shut down/turn off your phone. Once it off, press power button and volume down at the same time, hold it fow few moment before release it.
Once in cwm, install from sd card (you will know once you in it)
Then? Enjoy ur legend and flash any ROM once you got bored with cm7!
Sent from my Legend using xda app-developers app

Thanks for the response.
Firstly: -
- HTC Sync is not reading my (I think needed for HTCDev boot unlock)
- I did try just running the HTC Dev RUU - but it said I need to update the ROM(?) (from Build 1.31), which I believe is done by the HTC OTA update, which doesn't work
HBOOT 1.00
S-ON
Build 1.31
Not allowing update as loops into recovery with E:Error in /sdcard/download/OTA_Legend_Froyo_S_HTC_WWE_3.15.405.3-2.05.405.2_P_release_1603576x6ndkkwfpxcjvla.zip (Status 7) Installation aborted.
feed3 said:
1st thing 1st, unlock your bootloader.
2ndly, once unlocked, flash cwm.
3rd, download any ROM you want (lets pick cm 7.2 for starting point since you said no need for stock ROM) then put into your sd card.
Lastly, boot into cwm. Wipe all (data, cache, dalvik cache) then Flash(install) ROM.
Thats it (assuming your device is not usb bricked or hard bricked and you do all the steps correctly).
How?
To unlock, go to htc web site or google "unlock bootloader+htc dev"
Flash cwm? Go to dev section, theres a thread of cwm, follow "s-off" method (of course after unlocking your BL.
Boot into cwm? Shut down/turn off your phone. Once it off, press power button and volume down at the same time, hold it fow few moment before release it.
Once in cwm, install from sd card (you will know once you in it)
Then? Enjoy ur legend and flash any ROM once you got bored with cm7!
Sent from my Legend using xda app-developers app
Click to expand...
Click to collapse

Curveau said:
Thanks for the response.
Firstly: -
- HTC Sync is not reading my (I think needed for HTCDev boot unlock)
- I did try just running the HTC Dev RUU - but it said I need to update the ROM(?) (from Build 1.31), which I believe is done by the HTC OTA update, which doesn't work
HBOOT 1.00
S-ON
Build 1.31
Not allowing update as loops into recovery with E:Error in /sdcard/download/OTA_Legend_Froyo_S_HTC_WWE_3.15.405.3-2.05.405.2_P_release_1603576x6ndkkwfpxcjvla.zip (Status 7) Installation aborted.
Click to expand...
Click to collapse
No, you dont need htc sync. i've never installed htc sync either. you only need the driver (which is logically will be installed along with htc sync but also can be installed separately and it is needed so that your device will be recognized when you boot it into fastboot mode) and no, you no need to upgrade ROM, you only need to upgrade your bootloader (that HBOOT 1.00) and it is not updated through OTA.
Seriously, it took me only 2 hours (including downloading and installing SDK, driver, waiting for unlock file from htc etc) last time i did it and i have done it twice which 2nd time (because i had usb soft brick) is much more shorter as i saved the unlock file and it seems can be reused. What takes longer for me at that time is to understand the whole process, reading and researching through multiple sites but now you have a guide, so all you have to do is to read the instructions carefully. Once you unlock your bootloader and flash cwm, everything will be super easy (assuming your device doesn't have any defects from the beginning.)

Ok, thanks very much feed3. Will try this again based your info and the mini guide I've just written myself.
But before I go ahead, I'd rather not touch it than to make it unusable.
What does USB Bricked and Hard Bricked mean?
Thanks
----------------------------------
My guide:-
After reading the latest reply at XDA decided to give the root another go:-
http://forum.xda-developers.com/showthread.php?p=29969951#post29969951
- Seems need to upgrade HBOOT (to use the HTC Dev boot unlocker)
o See here post 62 and poss (BEFORE THIS READ NEXT BIT) 74 http://forum.xda-developers.com/showthread.php?t=1498298&page=7
- READ HERE FIRST  Looks like other people have had issues using stock Vodaphone 2gb SD card for goldcard. Get another and try. Go post that states ‘EDIT: It seems the LEGEIMG is not getting loaded’ that and the few posts after explain what’s happening. http://forums.whirlpool.net.au/archive/1657826
- So neeed to have a gold card in to make the above work <<
o Looks like this can do an auto gold card for you https://sites.google.com/site/roothtchero/goldcard-2. Remember to format to FAT32 in windows as opposed to phone. SEE Hubdolt POST WHICH TALKS ABOUT FORMATTING VIA THE CMD LINE (FOR VODAPHONE LEGEND)

Curveau said:
Ok, thanks very much feed3. Will try this again based your info and the mini guide I've just written myself.
But before I go ahead, I'd rather not touch it than to make it unusable.
What does USB Bricked and Hard Bricked mean?
Thanks
----------------------------------
My guide:-
After reading the latest reply at XDA decided to give the root another go:-
http://forum.xda-developers.com/showthread.php?p=29969951#post29969951
- Seems need to upgrade HBOOT (to use the HTC Dev boot unlocker)
o See here post 62 and poss (BEFORE THIS READ NEXT BIT) 74 http://forum.xda-developers.com/showthread.php?t=1498298&page=7
- READ HERE FIRST  Looks like other people have had issues using stock Vodaphone 2gb SD card for goldcard. Get another and try. Go post that states ‘EDIT: It seems the LEGEIMG is not getting loaded’ that and the few posts after explain what’s happening. http://forums.whirlpool.net.au/archive/1657826
- So neeed to have a gold card in to make the above work <<
o Looks like this can do an auto gold card for you https://sites.google.com/site/roothtchero/goldcard-2. Remember to format to FAT32 in windows as opposed to phone. SEE Hubdolt POST WHICH TALKS ABOUT FORMATTING VIA THE CMD LINE (FOR VODAPHONE LEGEND)
Click to expand...
Click to collapse
in short, hard bricked means your phone is totally unuseable, usually because of hardware defects but also might be cause by flashing wrong ROM, for example flashing ROM that actually not built for your device. Usually, you cannot do anything with it, cannot enter fastboot, recovery etc. Soft brick is repairable, you still can boot to recovery or even to the OS. Might be caused by some partition corruption (in the case of usb bricked, it is /misc partition).
If you use htc dev path to unlock your bootloader, no need for gold card. Thats for sure.
If your phone is usb soft bricked (among the symptoms are you will be able to boot into the OS ONLY if your phone are pluged in into usb, and/or adb not working at all) then google or search in xda for "htc legend+usb brick" and fix it. I'm pretty sure only then you can update your HBOOT and therefore unlock your bootloader via htc dev.
Once done, go to HERE and flash cwm using s-off method (dont care about your s-on that you see in your bootloader, the "UNLOCKED" word in it is more important)

In response:-
Thanks for the clarification.
- when using the process here http://forum.xda-developers.com/showthread.php?t=1498298&page=7 - and trying to get the bootloader to run the LEGEIMG.zip file, it flashes up stating "no image or wrong image!", it runs too fast to read it exactly.
- then looking at the same error this guy was getting at (see the 'EDIT: It seems the LEGEIMG' post onwards) http://forums.whirlpool.net.au/archive/1657826 - they have the same Vodfone Legend as me, a gold card had to be used to do the above update process (which should update HBOOT).
- this is the only HBOOT update process I've seen, but isn't clear as they look like they're on 2.2 and HBOOT 1.01.
............................Good grief
feed3 said:
in short, hard bricked means your phone is totally unuseable, usually because of hardware defects but also might be cause by flashing wrong ROM, for example flashing ROM that actually not built for your device. Usually, you cannot do anything with it, cannot enter fastboot, recovery etc. Soft brick is repairable, you still can boot to recovery or even to the OS. Might be caused by some partition corruption (in the case of usb bricked, it is /misc partition).
If you use htc dev path to unlock your bootloader, no need for gold card. Thats for sure.
If your phone is usb soft bricked (among the symptoms are you will be able to boot into the OS ONLY if your phone are pluged in into usb, and/or adb not working at all) then google or search in xda for "htc legend+usb brick" and fix it. I'm pretty sure only then you can update your HBOOT and therefore unlock your bootloader via htc dev.
Once done, go to HERE and flash cwm using s-off method (dont care about your s-on that you see in your bootloader, the "UNLOCKED" word in it is more important)
Click to expand...
Click to collapse

Curveau said:
In response:-
Thanks for the clarification.
- when using the process here http://forum.xda-developers.com/showthread.php?t=1498298&page=7 - and trying to get the bootloader to run the LEGEIMG.zip file, it flashes up stating "no image or wrong image!", it runs too fast to read it exactly.
- then looking at the same error this guy was getting at (see the 'EDIT: It seems the LEGEIMG' post onwards) http://forums.whirlpool.net.au/archive/1657826 - they have the same Vodfone Legend as me, a gold card had to be used to do the above update process (which should update HBOOT).
- this is the only HBOOT update process I've seen, but isn't clear as they look like they're on 2.2 and HBOOT 1.01.
............................Good grief
Click to expand...
Click to collapse
EXACTLY the same error message that you got, HERE and the op solve it.
Btw, during unlocking my bootloader, i've never encounter (or did i forget already??) to requiring this zip file. Isn't bootloader RUU from HTCdev is all we need? I think thats the only file i have to get (apart from the unlock bin file of course) if my memory doesn't cheat me..

Sure - but as the guy mentions formatting to FAT32, that's usually associated with goldcard creation right.
I've ran the bootloader RUU from HTC Dev a few times, and it always says that the ROM (HBOOT, build(?)) needs updating. Thus trying the aforementioned process (post 62 http://forum.xda-developers.com/showthread.php?t=1498298&page=7) to try and get the Rom (HBOOT) updated, which didn't work, which then loops back round to dealing with the zip file read error.
feed3 said:
EXACTLY the same error message that you got, HERE and the op solve it.
Btw, during unlocking my bootloader, i've never encounter (or did i forget already??) to requiring this zip file. Isn't bootloader RUU from HTCdev is all we need? I think thats the only file i have to get (apart from the unlock bin file of course) if my memory doesn't cheat me..
Click to expand...
Click to collapse

I'm getting more confuse here. I've never use goldcard as i reluctant to "sacrifice" my one and only card but here i am with unlocked bootloader. The RUU file is the one that will update your bootloader. Read instructions at htc dev carefully.. good luck..
Sent from my Legend using xda app-developers app

You need to read this post by blay0, it instructs how to update hboot without going back to stock, using gold card or any other outdated method of rooting (unless your on hboot less than 1.00 then you should follow the s-off method of rooting)
http://forum.xda-developers.com/showthread.php?p=22613990
Sent from my Legend using xda app-developers app

I think the reason I can't do the blay0 method is because of the stock sd card I'm using. It's not picking up the rom zip file.
I've ordered another http://www.kikatek.com/P188409/SDC10-8GB-Kingston-MicroSDHC-8GB-Card-Class-10?source=froogle
Will try again, and if that doesn't work - try this other method (as the guy here has HBOOT 1.00 and a Vodafone Legend too) http://chrg.zxq.net/htc-legend-root.html.
Many thanks for all your help people.
Will report back any success for the benefit of others.
All the best
ranger4740 said:
You need to read this post by blay0, it instructs how to update hboot without going back to stock, using gold card or any other outdated method of rooting (unless your on hboot less than 1.00 then you should follow the s-off method of rooting)
http://forum.xda-developers.com/showthread.php?p=22613990
Sent from my Legend using xda app-developers app
Click to expand...
Click to collapse

Hi guys,
Good news! I unlocked the bootloader with my 'new' SD card using the blay0 process (from the last post).
This is the first time I've done this though, and am just trying to figure out how to flash CyanogenMod 7.2.
ROM Manager doesn't work with 2.1 (installed) any more.
Can someone please briefly explain how I would flash.
Many thanks
Curveau said:
I think the reason I can't do the blay0 method is because of the stock sd card I'm using. It's not picking up the rom zip file.
I've ordered another http://www.kikatek.com/P188409/SDC10-8GB-Kingston-MicroSDHC-8GB-Card-Class-10?source=froogle
Will try again, and if that doesn't work - try this other method (as the guy here has HBOOT 1.00 and a Vodafone Legend too) http://chrg.zxq.net/htc-legend-root.html.
Many thanks for all your help people.
Will report back any success for the benefit of others.
All the best
Click to expand...
Click to collapse

SOLVED
Ah, done !! Woohoo!
That was lots of work. Well, easy via the HTCDev method <<
To get 7.2 on followed here:-
see s-off method to install recovery image http://forum.xda-developers.com/showthread.php?t=1290841&highlight=clockwork
To get into the recovery – use the col down + power button
Follow Method via Recovery here http://wiki.cyanogenmod.com/wiki/HTC_Legend:_Full_Update_Guide
Good luck everyone and thanks again XDA
Curveau said:
Hi guys,
Good news! I unlocked the bootloader with my 'new' SD card using the blay0 process (from the last post).
This is the first time I've done this though, and am just trying to figure out how to flash CyanogenMod 7.2.
ROM Manager doesn't work with 2.1 (installed) any more.
Can someone please briefly explain how I would flash.
Many thanks
Click to expand...
Click to collapse

Hello,
take the recovery-clockwork-5.0.2.0-legend.zip , put it on your SD-card and rename it to update.zip. Then use th S-ON-method from here and you will have no problem.

so there is no way to return the legend back to stock rom after all ?

Related

Questions about rooting htc magic

Hi, I've recently bought a HTC Magic and since then I've been reading into how to root my phone. Before I start I would like to know if it's possible on my phone.
Details:
HTC Magic Vodafone Uk (32B)
Hboot: 1.33.0007
Firmware version: 1.5
Build: CRC24
I've read from a thread in another section of this forum
that it would be impossible because of 1.33.0007 being a perfect spl BUT my phone is running the firmware version 1.5, with a CRC24 build. Would this mean I will be able to root my phone or not?
Also I've been reading up on how you either have cupcake or donut. My version is 1.5 so would that mean I have cupcake?
I'm worried that I might brick my phone so would prefer to use the one click tutorial at theunlockr (would add link but I can't) which is for htc magic running on cupcake.
Would it work?
Sorry for all my questions and I probably will end up asking more
Thanks if anyone can answer these for me!
You should be able to root using the relentless rooter or by following the guide on the unlockr. You are lucky you are running cupcake and don't need to downgrade
I think you are only really at risk when you flash radio and spl. Using the unlockr's stuff shouldn't be too bad. But read eveerything a bajillion times incase
same boat
Hey bunnybag
Was in the same boat as you until yesterday.
Also had a perfect SPL (0010) on a 32A.
I was also reading up a lot wrt getting a new ROM on my phone, and was also afraid of bricking it...
The gold-card method seemed quite involved, and that QMAT application doesn't exist anymore, and the newer version of it, does not run in XP or Vista...
Yesterday, I used the one click method from theunlockr, and after a few mistakes, it worked! Now I have a shiny CyanogenMod running with a 1.6 donut
It seems with the one click method -that you do not need to change the radio or SPL (which I guess are the most dangerous flashes to attempt)
Quicky summary of what I did, and where I deviated:
1) Read the one click method from theunlocker, and some of the comments at the bottom. Also - very importantly - watch the YouTube video at the top of the one click method page a few times!!
2) Downloaded the FlashRec apk (follow link on the one click method's page)
3) Installed FlashRec (the latest version of FlashRec looks slightly different to the one in the YouTube video but functions the same)
4) Did a backup of the existing recovery image via FlashRec. After the backup, you can copy the backed up .img to your PC...
5) Copied the latest Amon RA recovery image (v1.5.2) onto the SD card. Make sure you get the right one... there is a different one for 32A/32B... [Deviation from the one click method- which uses an older version of the RA recovery image]
6) Attempted to flash the new RA recovery via FlashRec. Here is where I struck a problem - the thing just stalled - for a good 10mins - and said 'do not interrupt' :|
I hooked up the USB cable, and from the command prompt ran: adb catlog
From here, scrolling up, I could see that FlashRec gave some message of invalid recovery image... Bit of a bummer - I checked the CRCs of the recovery image after copying it to the SD, and also tripple-checked the filename I typed into FlashRec! In the one click method page, they also warn about inadvertently adding spaces to the end of the filename when you type it in. I also checked for that.
I attempted it once more as follows:
-Rebooted phone
-Deleted the RA recovery .img from the SD
-Re-copied it onto the SD, and this time renamed it to something easy: ra.img
-Checked the CRC
-Ran FlashRec, and specified the path as: sdcard/ra.img
-Flash succeeded! maybe FlashRec can't handle very long file names?
7) After the recovery was flashed, I booted into recovery mode (HOME & POWER). Seems like the Amon RA recovery image takes slightly longer to boot that the stock recovery... so - don't crap yourself if it takes a few seconds. This is also a good point to stop, and watch the second video from theunclockr on how to load a new ROM...
8) After verifying that the new recovery image was working I booted back into Android, and I copied my ROM's files onto the SD. I used the Cyanogen Mod. The Cyanogen wiki has a page on how to load it for a 32A and also 32B.
Basically, you need the latest stable cyanogen mod, an Android 1.6 "defanged" ROM (link available on the Cyanogen wiki), and a new kernel. The kernel is 32A/32B specific, so get the right one.
9) With the 3 files on the SD, I booted back into the new RA recovery I just flashed.
10) Did a Nandroid backup
11) Did a wipe/factory reset [Deviation from theunlockr method: I did not format my SD card, or partition it into Ext & Swap. I prefer not to have a Swap partition on the SD, nor do I think I'll need to swap any apps out to the SD card... I think the 32A has enough space... you can read further about it in the xda-developers wiki, under page: HTC_Sapphire_Hacking_2]
12) Still in RA recovery, I applied (in order) a) the defanged 1.6 ROM, b) the Cyanogen mod, c) the new 32A kernel
13) Flashing it takes a while - there is a progress bar...
14) Reboot after all 3 were flashed. The first reboot takes a looong time... couple of minutes... don't worry, or try to reboot again... just give it time.
15) Once inside - tested everything: GPS, Wifi, Phone, Market, G-sensor, Gtalk, Gmail.
16) It might be worth while to note that once the phone is booted, and you've entered your SIM PIN, and the Android desktop is displayed, it can still take a few seconds - 4 or 5 I guess, before you are able to interact (swipe desktop left/right). Give it time to settle down, and all is well
//TODO: still need to flash a new splash-image...
Good luck - post back here with your results!
How to root Magic (32A) with Europe ROM ROM Version:3.05.401.3 with Sense?
Have somebody any idea, how to root Magic (32A) with Europe ROM Version:3.05.401.3 with Sense? Thanks!
bogo_mips said:
Hey bunnybag
-Re-copied it onto the SD, and this time renamed it to something easy: ra.img
-Checked the CRC
-Ran FlashRec, and specified the path as: sdcard/ra.img
Good luck - post back here with your results!
Click to expand...
Click to collapse
Ah, I tried using the unlockr's method and failed at flashrec. The unlockr kept saying that the reason was because I was already on Donuts but that is not true. I ended up using the relentless rooter software (looking back, his method is basically an automation of the original method).
Maybe you should post this also in the unlockr so that people who have "backup failed" messages know what to do?
Thanks for the info. It will be very helpful for other members trying to use the unlockr method.
Thanks for the post guys.
@bogo_mips: Great advice and I'll more than likely use this along with the unlockr one click tutorial.
Oh and there's one thing I'm worried about. My phone has somehow automatically downloaded the 1.6 upgrade and it keeps asking me to install it. Anyone know of a way to delete it so that it won't upgrade?
I'm worried that it might install if I turn my phone off.
@bunnybag: that 1.6 download sounds like a problem... if it takes, you'll no longer be able to do to the one-click method...
Check around the forum for advice. I'd guess - since the download would have had to happen in user-space, that the downloaded file might be sitting on the SD card or possibly the phone's flash. Get that Linda Filemanager app from the market and poke around... I guess if you could find the file, and delete / rename it - you could avert an install?
Alternativley, I'm guessing that if you can attempt the one-click method, that you'll have a new recovery image before you power down your phone, so - I think that will keep you safe...
@visitador02: according to the FlashRec page, there are 1.5 cupcakes out there which have been patched, so - FlashRec can't work on them... maybe that is what happened to you...

[GUIDE] Installing RUU's

mod: If this should be in DHD General, please move it
At the moment, sometimes current RUUs (ROM Update Utility) do not flash from the latest RUU exe - many times it will not recognise the Desire HD.
If you are having this problem, this is how to flash the latest stock RUU.
The latest RUU at the time of writing is 1.32.405.6.
You can download the RUUs from xmoo's thread or from mousey_'s site.
note: This is mainly for stock phones, for vendor-derived ones (e.g Vodafone DHDs in Australia) you will also need a goldcard.
Common Steps
Download the latest RUU (1.32.405.6).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\Ivo\AppData\Local\Temp (Replace my username with yours; AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.
A) Install through PC
Download and install HTC Sync 3.0 and restart.
Download the 1.15.405.1 Test RUU. It is the only one currently known to find the Android DHD.
Start it the same way as before, get to the
1. Connect the Smartphone to the USB Cable.
step. (but no further)
Again, go to the AppData local temp directory (same as above), and find the folder with dotnetinstaller.exe and inside that, rom.zip
You want to delete the rom.zip (which is the 1.15 version) and replace it with (copy back) the 1.32 rom.zip you copied out earler.
DO NOT UPDATE WITH 1.15 ROM, IT IS NOT DESIGNED FOR RETAIL DHDs.
Now click through the next buttons.
The 1.15 Utility should now be set to update with the 1.32 rom. You will see the version number of the rom at the final step.
Click update and watch the magic happen
B) or Install through Phone
With the rom.zip you copied out earlier, rename it PD98IMG.zip
Copy this onto the root of your microSD card through some means (disk drive, ftp, wireless).
Restart your phone and boot into the bootloader by holding power and volume down at the same time as it restarts.
It should go into the bootloader, take a fair while to check the zip on the sd card, and then ask you if you want to flash it.
Say yes!
Hope this can help some people for whom the 1.32 RUUs aren't working for them
Thanks for putting up this post! I was about to request one last night.
Now if only there could be a similar guide to flashing custom ROMs
To force unroot, I could reinstall RUU 1.32.405.6 from Win7 without problems, a bit longer than updating/reinstalling a WinMo 6.5.x rom (my former HD2), but it went through...
Thanks Ivolol this worked a treat
Appreciate your guide and efforts.
I am running Win 7 64. folowed 1.15 method now running latest 1.32.405.6
Howling Wolf said:
To force unroot, I could reinstall RUU 1.32.405.6 from Win7 without problems, a bit longer than updating/reinstalling a WinMo 6.5.x rom (my former HD2), but it went through...
Click to expand...
Click to collapse
Weird; I tested a couple of RUUs (not as many as xmoo did) and all of them couldn't connect to my phone (whereas 1.15 could).
It'd be interesting to find out what the factors are that cause this. ATM the guide above is what to do if someone finds themselves in the same situation (the current ROMs won't find the phone).
Howling Wolf said:
To force unroot, I could reinstall RUU 1.32.405.6 from Win7 without problems.
Click to expand...
Click to collapse
+1 here, went through the normal RUU process fine just for ****s and giggles. I've extracted the ROM.zip though in case it's needed for future use.
sorry for the noob question..just had my DHD for the last 5 days. I come from galaxy S, and in there whenever we flash a rom all the data gets wiped out.
is it true also when we flash a RUU??
also if I do that...would i still be able to get OTA updates??
nandihno said:
sorry for the noob question..just had my DHD for the last 5 days. I come from galaxy S, and in there whenever we flash a rom all the data gets wiped out.
is it true also when we flash a RUU??
also if I do that...would i still be able to get OTA updates??
Click to expand...
Click to collapse
I haven't got complete knowledge of the entire subject yet, but:
a RUU will completely wipe all user settings / apps. Won't do anything to the sd card though.
An update.zip is akin to an OTA update, it does not wipe user settings.
Flashing with a stock RUU will mean that you can still get OTA updates.
I've tried using the phone method and unable to flash successful. I believe you need a valid GoldCard to use this method.
Can you confirm if the GoldCard is required for doing it with the phone method?
In addition, once the unit (especially our Voda branded one) is flashed with the latest ROM, OTA may not run properly which will result in disabled functionality (as recorded in this thread: forums.whirlpool.net.au/forum-replies.cfm?t=1575514, wifi stopped working). Theory said you'll need a GoldCard to get OTA to work properly (from another thread in XDA).
Thanks.
Great Guide thank you very much. Now i know to flash back to stock now if something gose wrong as iam a noob to android it took some time to work it out even tho it is a simple guide now i wanna know after getting perm root how do i flash a custom rom ? do i need clockwork mod?
tleehm said:
I've tried using the phone method and unable to flash successful. I believe you need a valid GoldCard to use this method.
Can you confirm if the GoldCard is required for doing it with the phone method?
In addition, once the unit (especially our Voda branded one) is flashed with the latest ROM, OTA may not run properly which will result in disabled functionality (as recorded in this thread: forums.whirlpool.net.au/forum-replies.cfm?t=1575514, wifi stopped working). Theory said you'll need a GoldCard to get OTA to work properly (from another thread in XDA).
Thanks.
Click to expand...
Click to collapse
There is a big reason I decided to buy my DHD outright and not through Vodafone
I'm pretty sure that Vodafone's OTAs will be different from HTC's. In order to get OTAs from Vodafone you will need their image on it.
Also with vodafone's ROM installed, I wouldn't think it would accept HTC's vanilla ROM/RUU without going through the entire root process (it would only accept Vodafone signed ROMs). So in order to get onto HTC's ROMs I would think you need to follow http://forum.xda-developers.com/showthread.php?t=841076 before the phone will let you run a HTC RUU on it.
I haven't explored goldcards as I personally have no use for one, but you might also need one by the sounds of it for the Vodafone ROM to let you replace it. (edit: yes it looks like you need one to officially flash from a Vendor ROM to a generic one.)
So this guide is mainly for people with vanilla HTC phones. Although someone has posted a stock rooted Vodafone ROM on the phones so you might be able to use the same techniques outlined here with that.
ssimmmo said:
Great Guide thank you very much. Now i know to flash back to stock now if something gose wrong as iam a noob to android it took some time to work it out even tho it is a simple guide now i wanna know after getting perm root how do i flash a custom rom ? do i need clockwork mod?
Click to expand...
Click to collapse
clockwork mod is useful but not entirely necessary. You might be able to use this guide's method to flash a custom ROM onto it (haven't tried yet), but otherwise I think what you need is a recovery img that will let you upload custom/unsigned ROMs onto it. And also S-OFF I imagine.
ok so i have S-OFF and clockwork mod recovery...
if i have the rom.zip and rename it to PD98IMG.zip and run bootloader.
i shouldnt have any problems flashing this rom??
BTW am using Aus branded Vodafone HDH.
also..IF i flash this rom..would i loose S-Off and clockwork recovery mod??
would flashing this allow me to gain OTA???
nandihno said:
ok so i have S-OFF and clockwork mod recovery...
if i have the rom.zip and rename it to PD98IMG.zip and run bootloader.
i shouldnt have any problems flashing this rom??
BTW am using Aus branded Vodafone HDH.
also..IF i flash this rom..would i loose S-Off and clockwork recovery mod??
would flashing this allow me to gain OTA???
Click to expand...
Click to collapse
If you flash a stock RUU rom.zip then you will loose all custom apps, data, s-off, recovery, etc. It puts it to factory settings. If you are in the business of flashing ROMs then I wouldn't worry about OTA because the developers here will integrate HTC updates as they come out, if they come out
However yes I think if you flashed a stock RUU then you will be able to get OTA. You might still need a goldcard, I'm not exactly sure.
ivolol said:
mod: If this should be in DHD General, please move it
At the moment, sometimes current RUUs (ROM Update Utility) do not flash from the latest RUU exe - many times it will not recognise the Desire HD.
If you are having this problem, this is how to flash the latest stock RUU.
The latest RUU at the time of writing is 1.32.405.6.
You can download the RUUs from xmoo's thread or from mousey_'s site.
note: This is mainly for stock phones, for vendor-derived ones (e.g Vodafone DHDs in Australia) you will also need a goldcard.
Common Steps
Download the latest RUU (1.32.405.6).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\Ivo\AppData\Local\Temp (Replace my username with yours; AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.
A) Install through PC
Download and install HTC Sync 3.0 and restart.
Download the 1.15.405.1 Test RUU. It is the only one currently known to find the Android DHD.
Start it the same way as before, get to the
1. Connect the Smartphone to the USB Cable.
step. (but no further)
Again, go to the AppData local temp directory (same as above), and find the folder with dotnetinstaller.exe and inside that, rom.zip
You want to delete the rom.zip (which is the 1.15 version) and replace it with (copy back) the 1.32 rom.zip you copied out earler.
DO NOT UPDATE WITH 1.15 ROM, IT IS NOT DESIGNED FOR RETAIL DHDs.
Now click through the next buttons.
The 1.15 Utility should now be set to update with the 1.32 rom. You will see the version number of the rom at the final step.
Click update and watch the magic happen
B) or Install through Phone
With the rom.zip you copied out earlier, rename it PD98IMG.zip
Copy this onto the root of your microSD card through some means (disk drive, ftp, wireless).
Restart your phone and boot into the bootloader by holding power and volume down at the same time as it restarts.
It should go into the bootloader, take a fair while to check the zip on the sd card, and then ask you if you want to flash it.
Say yes!
Hope this can help some people for whom the 1.32 RUUs aren't working for them
Click to expand...
Click to collapse
As I am Newbie of Android and I have noob quesitons. Could you please explain what is RUU and use this for what purpose?
Yeah. I got a goldcard inside of my phone but the bootloader doesn't recognize the P98IMG on my sdcard even though its there for sure. No idea how to fix this
Dr. lele said:
Yeah. I got a goldcard inside of my phone but the bootloader doesn't recognize the P98IMG on my sdcard even though its there for sure. No idea how to fix this
Click to expand...
Click to collapse
How big is ur sd-card, and also what brand. Sometimes this is also a issue....
It's a kingston 8 gb class 4, but thanks for the tipp, I'll try another.
Yep, it was the sdcard xD. It's updating as I type
Carnt I just use the updater on the pc with the Rom? I have tried the method and I don't see a Rom file just a data1 file which is a ear file. I really would like stock ROM on my device
edit: i just used the exe and it installed perfect, so now it should be stock with no root,and sn
cxeka7 said:
As I am Newbie of Android and I have noob quesitons. Could you please explain what is RUU and use this for what purpose?
Click to expand...
Click to collapse
An RUU is an exe which contains the stock 'firmware' from HTC to flash to your device. Basically it will do a full factory reset of your device. It won't wipe your sdcard but it will overwrite everything else.
it didnt asked me for anything on option B) or Install through Phone. i didnt get the option to flash it.

[Q] HTC WildFire A3335 Qustion

I have a basic question,
I'm only asking because there's far too much
information available,
on here
and its not easy to find what best fits my
needs.
I have an unlocked A3335 wildfire ( Telstra NextG network 3g version), I'm using it on optus,
my boyfriend was useing it he dowloaded a
font change app for the phone,
but when he did it my phone went in to
bootloop mode.and keep't bootlooping again
and again
all i get is the start up screen,
with yes you guessed it
(Telstra NextG network 3g crap)
All I want to do is try and get my phone from
this bootloop mode and try and recover...
my phone back to how it was.
Its hard to explain,
ok when i go in to the boot screen
i have this on my phone
BUZZ PVT SHIP S- Off
HBOOT-1.01.0002
MICROP-0622
TOUCH PANEL-ATMEL224_16ab
RADIO-3.35.20.10
DEC 27 2010,
17:49:10
and it reads the sd card,
it said the Boot Image. is missing
dont know why a app would take this out
but this is what happen
So Now when i did the fastboot on my phone
it done nothing,
then did the clear storge.
then i did the recovery
it rebooted to a black screen with A
triangle shape with one of these things
! in the middle of it,
but still stuck
I can follow the regular guides for rooting,
can any one help me to get my phone back to
how it was please
And I really don't care about this part much,
but would be nice to have it off the phone
and remove all the telstra junk and restore
the phone back to how HTC would ship it,
(all the junk apps they include could easily be optionally installed from marketplace if you want their crap...)
(obviously I'm in Australia also)
There are so many ROMS and options available,
including the ones from shipped roms
(it wont let me post the link because I'm new).
I just want my phone back to how i got it,
can any one help me please....
please send me a private messages,
with a step by step guide to do so thanks..
Since you are s-off u can use fastboot flash from windows to flash a clockwork mod recovery. After you do that, every thing will be simple. Just download a rom in zip format,put it to sd go to recovery( just do what you have done to see the triangle in blackscreen. Note that if u flash cwm you will no longer see that triangle). Then use your volume down button to reach install zip from SD card. Hit it with joystick press. Choose zip. Install it. Just do a data- factory resetting before you install zip.
I prefer cyanogen mod 7. U may use latest stable or nightly build. Feel free to post any doubt you have. We are happy to help you.
Regards shah.
Sent from my HTC Wildfire using XDA App
thank you so much your a life saver it work't have my phone back now yay
K. Be in touch with xda. Find out more. Make your wildfire yours and not htc's.
Thank u
Sent from my HTC Wildfire using XDA App
well i got some bad news its gone back to how it was,
trying to do the same thing,
could you please give me a step by step guide thanks,
do i need to turn my sd card in to a gold card ?
its formatted to a FAT32
If you have any ideas where to go and get this would be a great help
aussiegirl said:
well i got some bad news its gone back to how it was,
trying to do the same thing,
could you please give me a step by step guide thanks,
do i need to turn my sd card in to a gold card ?
its formatted to a FAT32
If you have any ideas where to go and get this would be a great help
Click to expand...
Click to collapse
nope that gold card image will send to ur email..and u need to copy that gold card image to ur sd card...
Well if the hboot is 1.01.0002 with S-OFF then it must be done using xtc clip. So fastboot flashing shouldn't be working. And u don't need a gold card for S-OFF wildfire .
I would just suggest to flash a stock froyo WWE RUU which also removes the carrier bloatware. If ruu proccess gives errors u can copy the romzip from that ruu and use it with pc49img process from hboot menu. And ofcourse fat32 memory card is must for pc49img process
Sent from my Blade using XDA App
Hey can you explain what happened now? You said that yours is working now before 2 days. ( in second last post). So what happened now? What have you tried with your phone?
And...
So the gold card question, let me explain.
Gold card is just a patch tool, with the help of which you can unlock HTC boot loader , or in detail, you can unlock HTC 's boot loader protection(that's what we call as s-off) , which is commenly locked( that's we call as s-on) , for a user mode phone( a phone that is for sale to normal user), and it is done so because a normal user never need a root permission, over clocking etc. Also user defined kernal,rom,radio updates unless HTC provide them with updates.( and of cource to protect their device and its custom os made by HTC.
So being an s-off device, we can say in simple, unleash the potential of android.( that's what i said, make the device yours and not HTC 's).
And s-off. In can be done using many ways, find them in topic " complete wildfire index " , one of which is using goldcard method. It is also explained in topic/ stickies " downgrade hboot to xxxx". You can download an attached file called buzz downgrade from that topic, and its what you all need.
And about ruu flashing, i think its not a safe one for you, Coz your phone is a3335? Right? If so, original ruu flashing may cause problems with network( called as radio problems), so you can use custom/ safe ruu, instead. Which contains no radio image, check " complete wildfire index" else go for custom os like cm7.
But before all you should mention what you need.
1) r u trying to put custom os, or do you need original os?
2) do you want your phone to be a true android gadget, or just normal phone which is provided by HTC?
3) what kind of user r u? Normal user or a tech junky?
4) r u satisfied with android 2.2 or need 2.3?
Get us the answers, along with your current boot menu( where you find recovery option) details. So that we can help you properly.
That's all dude. Its 2.30 am here in India, so i should wish myself a good night, swtdrmz. Cu ltr.
Sent from my HTC Wildfire using XDA App
showlyshah said:
And about ruu flashing, i think its not a safe one for you, Coz your phone is a3335? Right? If so, original ruu flashing may cause problems with network( called as radio problems)
Click to expand...
Click to collapse
Oops. Completely missed that point, sorry.
But since the phone is S-OFF one can just flash the system.img and boot.img alone from wwe ruu to remove the carrier bloat and to continue on the HTC stock rom (only if u wish to). Same pc49img process here but with only system.img and boot.img along with android-info.txt .
Sent from my Blade using XDA App
bharatgaddameedi said:
Oops. Completely missed that point, sorry.
But since the phone is S-OFF one can just flash the system.img and boot.img alone from wwe ruu to remove the carrier bloat and to continue on the HTC stock rom (only if u wish to). Same pc49img process here but with only system.img and boot.img along with android-info.txt .
Sent from my Blade using XDA App
Click to expand...
Click to collapse
now im lost where do i fine the right one to use do you know how many there are out there this phone is doing my head in i try to flash the system.img and the boot.img and a stock rom and still nothing im ready to give up to be honest
Have you installed clockwork mod recovery? If not do it first. Use fastboot flash from windows or linux, then download latest cyanogen mod nightly and put it in your sd. Then use install zip option from cwm recovery to install cm7. Done. Its what you want. No radio harm will be done unless you flash a radio using any methods.
All info will be available on thread" complete wild fire index" in this forum. Tools, recovery, how to, rom, and every thing else are available in that thread.
Sent from my HTC Wildfire using XDA App
i have all of these things you said here what i dont understand i have tryed this so many times and still dosent work and its abit hard with work as i dont get much time to fix this phone for the past week has given me nothing but a pain in the rear end and its doing my head in...
ok let me show you and try to explain this ok i rooted my phone before so you know its s-off what im trying to do is to get it from the boot looping as its stuck until i put it in to HBoot and did a recovery it stop boot lopping then i did a search and come across this site read and read countless info trying a number of things first so then i did the clear storage then rebooted phone then i got the home screen with yes the Telstra NextG network then i took out the battery then put it back in did the same thing as before got in to HBoot then i read on here to turn the sd card to a fat32 which i did so i read more and more did that they said to do and so on now when i did that i got the home screen with Telstra NextG network then it changed to a black screen with a yes triangle shape with one of these things ! in the middle of it, so then i come here post this on here looking for help then i did what you said to do it work for 2 days then went straight back to how it was then i read the reply's to this done the same thing'y over and over still im with out my damn HTC hunk of junk to be honest this phone has become a big pain in the rear end and has done my head in for over a week i rooted a LG p350 and that hasn't been unlocked until i did it i have never in my life had so much drama with a HTC WILDFIRE A3335 until now i did all my mates smart-phones with no hic up now trying to do my own its like im at the end of my wits i have photos with this so you can see what i get when doing what you said ok the gold card thing'y already did it still phone will not read it as you will see first hand
aussiegirl said:
ok let me show you and try to explain this ok i rooted my phone before so you know its s-off what im trying to do is to get it from the boot looping as its stuck until i put it in to HBoot and did a recovery it stop boot lopping then i did a search and come across this site read and read countless info trying a number of things first so then i did the clear storage then rebooted phone then i got the home screen with yes the Telstra NextG network then i took out the battery then put it back in did the same thing as before got in to HBoot then i read on here to turn the sd card to a fat32 which i did so i read more and more did that they said to do and so on now when i did that i got the home screen with Telstra NextG network then it changed to a black screen with a yes triangle shape with one of these things ! in the middle of it, so then i come here post this on here looking for help then i did what you said to do it work for 2 days then went straight back to how it was then i read the reply's to this done the same thing'y over and over still im with out my damn HTC hunk of junk to be honest this phone has become a big pain in the rear end and has done my head in for over a week i rooted a LG p350 and that hasn't been unlocked until i did it i have never in my life had so much drama with a HTC WILDFIRE A3335 until now i did all my mates smart-phones with no hic up now trying to do my own its like im at the end of my wits i have photos with this so you can see what i get when doing what you said ok the gold card thing'y already did it still phone will not read it as you will see first hand
Click to expand...
Click to collapse
No expert but looks like you have an empty sdcard and system.I think you need to get a rom onto your sdcard (cm7 good choice) and then through recovery apply the rom. Zip and reboot after. DONT DO A WIPE.the telestra screen is just a splash screen which will always load before the system searches for data to load,next would be boot loading screen but yours by the looks and sounds of things does not achieve!! Probably cos its not present due to not having a rom installed.hope I helped if not best of luck. Members are very helpful here and cos you can access hboot I am 99% sure this will be fixed for you. Regards Slymobi.
Sent from my HTC Wildfire using XDA App
i have a rom on my sd card but the thing keeps saying FAILED? NO SUCH FILE FOUND ?
Download this: http://shipped-roms.com/download.ph...5.55.24H_3.35.20.10_release_160191_signed.exe
Enter HBOOT.
Wait until it finishes trying to load a zip file.
Choose FASTBOOT to enter FASTBOOT USB mode.
Run the downloaded file.
It should then install the original HTC rom.
Or maybe try PC49IMG method if you haven't already?
On your PC click start and type in the search box %temp%,
Keep your eye on this folder and doubleclick your ruu, a new folder should appear in temp folder,
Open it and search for rom.zip,
Copy it to your desktop and rename it to PC49IMG.zip then copy to your SD card and boot into hboot, it should find the zip and install.
Sent from my HTC Wildfire using xda premium
@scratches post. I couldn't remember the method but that's exactly how I got my ruu to install so I could revolutionize.
Sent from my HTC Wildfire using XDA App
i have done that already still no go

Not rooted Wildfire stuck in bootloop - need help

I got my sisters Wildfire here and it's stuck in a bootloop.
It is NOT rooted, has no S-Off and so on.
It has the stock rom.
It didn't run fluently, so I just rebooted it. But since then it doesn't boot.
Tried taking out battery, putting it back in, no success.
Tried taking out SD-Card. no success.
Then I booted into Bootloader (Vol + Power down).
Buzz PVT Ship S-ON
HBOOT-1.01.0001
MICROP-0622
TOUCH PANEL-ATMELCO 3_16ac
RADIO-3.35.20.10
All I get to choose is Fastboot, Recovery, Clear storage and Sim-lock.
Recovery turns out to be nothing, I can't get to it. Might be, because there is no CWM on it.
I was lucky to be able to root and s-off my DHD, so I don't have any idea, how to fix this problem with the Wildfire.
Any suggestions how to solve this little problem?
Thanks in advance
Which method u adopted for rooting....try revolutionary method and u will be s-on....bt ur mobile doesn't on....try to intall ruu which can be downloaded from shipped-roms.com,download wwe version file....run it,it will install stock rom again,then enable debugging mode,goto revolutionary.io fill the form and copy generated alphanumeric code carefully and download the file run it and u will get s-on....
Sent from my HTC Wildfire using XDA App
Thanks, but actually I neither want root nor s-off on it...I just want to get this smartphone to boot again...I'll try to get the RUU on it, like you suggested
Sent from my Desire HD using Tapatalk
Would "RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.24H_3.35.20.10_release_160191_s
igned.exe" be the right one?
And if, what to do next with it?
Thanks in advance
- Extract the Rom.zip from the RUU you listed. Procedure here:
http://lukasz.szmit.eu/2010/04/extracting-rom-files-from-htc-android.html
- Rename this zip to PC49IMG.zip
- Place this on the root of the sd card
- Reboot in HBoot mode, the phone will detect the file and will attempt to install. Select Yes and let it proceed.
Thanks, I'll do that when I'm done in University :-D
Just so I have more opportunities in case this happens again.
Could you give me a link to a instruction how to root and s-off?
This would help
And, just in case, which do you think is the best Custom Rom for the Wildfire?
You can use Revolutionary to get S-OFF and Clockworkmod Recovery. Guide here:
http://joel5121.blogspot.com/2011/06/wildfire-22-root-tutorial.html
The only thing that has changed is AlphaRev's Website. The new address is revolutionary.io. Everything else remains the same. Although, you will need a booting device to get it to work.
Lastly, ROM choice depends on whether one would like to keep HTC Sense or not. If not, then I would go with Cyanogenmod / Oxygen (Two ROMs I am pretty sure are available for the DHD as well). And, if you would like to keep HTC Sense, then the current favorites are DK Custom ROM and RemPuzzleROM.
Complete Listing available in the Index Thread linked in my Sig.
Good Luck
I only want to flash a ROM on the Wildfire. My dhd runs on arhd and I won't change that well, unless there's a newer version of arhd
Anyways, what is the best sense ROM
for the Wildfire? Should run smooth but stable and fast. And of course it should've good battery life
Sent from my refrigerator using Tapatalk
I'm stuck myself. Wildfire is working again, but neither can I root nor can I make S-OFF.
On AlphaRevX it "sends in Caroline" and "Caroline" comes out with an error report
However, USB-Debugging was turned on, SD Card active, connected to pc, but "only charge"...
That far for S-Off...
Then I'm trying unrevoked. Works so far, until the Wildifre is in the bootloader. Unrevoked tells me, it's waiting for bootloader. When I choose Fastboot on the device, unrevoked works on and tells me "Waiting for HBOOT to be ready..."
Nothing happens after that. If I choose Bootloader on the device, unrevoked tells me, that it has lost connection to the phone.
Then I tried Gingerbreak. Gingerbreak works, reboots the phone, I check for SU and can't find it. So I guess it's not rooted then :-/
Any suggestions?
Your only (free) option is Revolutionary on Wildfire's with official 2.2.1 and HBoot 1.01.x. Any other method (Unrevoked, Gingerbreak, SuperOneClick etc) will not work and will result in failure. Errors on Revolutionary can usually be treated EXCEPT when it says "Not writing bad block at mtd 0x00000", in which case, there are bad blocks on the NAND memory, and there is no fix yet.
The paid option is to find a store with an XTC Clip hardware box, which can S-OFF the Wildfire as well. They will charge you a 1-time fee for using it.
3xeno said:
Your only (free) option is Revolutionary on Wildfire's with official 2.2.1 and HBoot 1.01.x. Any other method (Unrevoked, Gingerbreak, SuperOneClick etc) will not work and will result in failure. Errors on Revolutionary can usually be treated EXCEPT when it says "Not writing bad block at mtd 0x00000", in which case, there are bad blocks on the NAND memory, and there is no fix yet.
The paid option is to find a store with an XTC Clip hardware box, which can S-OFF the Wildfire as well. They will charge you a 1-time fee for using it.
Click to expand...
Click to collapse
So since this is exactly the fault that is displayed, there is nothing I can do...
But this other tool for s-off ain't working either. If I'd have at least s-off...in this tutorials I first make s-off and afterwards there is a zip archive which will give me SU. Can I install cwm without Root? I'd really like to flash cyanogen...
Sent from my refrigerator using Tapatalk
No, unfortunately, as I stated in my previous post, you cannot.
The best option will be revolutionary but solve ur first problem and then move on to this...we r always here....
Sent from my HTC Wildfire using XDA App

[Guide] Stuck in Hboot Read This

After seeing this issue quite a few times this past week I thought I make a tutorial on how to possibly fix this. If any of you see any errors or any way to improve this guide please let me know and ill include it and or adjust accordingly
Note-Make sure you have plenty of battery. You don’t want your phone dying in the middle of flashing a PD98IMG
If you are stuck in Hboot and have S-On go straight to flashing Stock Rom section or Alternate method at the end
Do not rename or unzip-Leave as is
Recovery: http://min.us/mbaD8QTK4A
WWE Stock Rom (Sense 3.0): http://min.us/mIc6tkSGg
NOTE- The Stock Rom is for a Desire DHD. If you have an Inspire 4g or Telus DHD do not use the file. Use one of these instead
Inspire 4g pre-rooted Stock Rom: http://db.tt/DCU3oW39 (only use if you have S-off)
Inspire 4g stock Rom: http://min.us/mblzL6b6vL
Telus DHD Stock Rom: http://min.us/mTqXM8fTY
Reinstalling Recovery
If you have Eng S-Off and feel comfortable with adb you can flash a recovery that way. Go to Reinstalling Recovery using adb
For whatever reason you have wiped your custom recovery (My guess is you did a factory reset, thus erasing it). Personally i would try this first as one can go straight to a custom rom. If you don't want a custom rom feel free to go to the flashing stock rom section.
1)Back up anything you don’t want deleted from your sd card
2)Plug in sd card into computer through an adapter of some kind or another phone
3)Reformat the Sd Card to Fat32 – Do a full reformat not a quick
4)Once reformat is complete place the file downloaded from the first link on the sd card
5)Eject the sd card from computer and insert into phone
6)Power off phone by pulling the battery
7)Reinsert the battery
8)Boot into bootloader by pressing volume down and power button
9)It will scan for the file press volume up to accept update
10)It will ask you to reboot- but it will still be stuck which is normal
11)If everything is going to plan you now have access to recovery. So now we need to flash a rom. Skip down to the flashing rom section if you don’t know how to. If flashing the recovery didn't work continue to the next section
Reinstalling Recovery With No Card Reader
Note: Eng S-OFF is not needed for this method
1) Download recovery above and place it in your fastboot directory
2) Boot into Hboot
3) Connect your phone to your PC
4) Select fastboot
5) Open up command prompt and CD to your Fastboot directory
6) Run the command fastboot erase cache
7) After the OK run fastboot oem rebootRUU
8) You'll see a new screen with HTC logo and a progress bar. here you need to run fastboot flash zip PD98IMG.zip
9) Once it completes (should say ok,finished, or complete) run fastboot reboot bootloader
10) Go into Recovery and flash a rom
Reinstalling Recovery Using ADB and Fastboot
Note: you need to have Eng s-off with this method.
You can use the recovery img that is found above or one of your choosing(newer cwr or 4ext recovery)
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot
Flashing a Stock Rom
Note-If you are S-off I suggest flashing a pre-rooted stock rom, as there is no need to re-root.
1)If coming from previous section plug in sd card and delete old file then Jump to step 5
2)Back up anything you don’t want deleted from your sd card
3)Plug in sd card into computer through an adapter of some kind or another phone
4)Reformat the Sd Card to Fat32 – Do a full reformat not a quick
5)Once reformat is complete place the file downloaded from the second link(stock rom) on the sd card
6)Eject the sd card from computer and insert into phone
7)Power off phone by pulling the battery
8)Reinsert the battery
9)Boot into bootloader by pressing volume down and power button
10)It will scan for the file press volume up to accept update
11)If everything is going to plan you now should have a fully working phone
12)At this point you are un-rooted so if you want re-root I recommend using the ace hack kit. (unless you used a pre-rooted rom then no need to use hack kit)
NOTE- IF EITHER FLASHING THE STOCK ROM OR RECOVERY PD98 FILES HAS NOT WORKED REPEAT PROCEDURE WITH A DIFFERENT SD CARD
Flashing rom
1)So we were able to re-flash a custom recovery. Connect sd card to computer and delete the PD98img file
2)Download the rom of your choice and any super wipe zips if your rom needs it
3)Place file on sd card eject and reinsert onto phone
4)Boot in bootloader.( An alternate is using adb to boot into recovery)
5)This time it will scan and not find any files. After it scans scroll down and select recovery.
6)You should now be in CWR. Do a full wipe (wipe data, cache, and dalvik cache-found in advanced I think
a.If recommended by your rom uses a super wipe zip. Simply choose install from sd card in CWR and select the super wipe zip
7)Now flash the rom by selecting install from sd card and choosing rom
Alternate- Flashing of a RUU
This is for those that don’t have access to an adapter to place files with. This should work whether your S-on or S-Off
RUU’s: http://www.filefactory.com/f/efa28fefafc4af9c/
1)Download your RUU from above
2)Boot into Hboot
3)Connect your phone to your PC
4)Select fastboot
5)Run the RUU program
Credits to Gene Pool for the Recovery PD98 and pre-rooted RUU for us inspire users.
Thanks to Gizmoe for his link- helps avoid the renaming issues that crop up and idea for alternate RUU flashing,
Thanks to Football for the RUU.exe links
Thanks to Attn1 for the hack kit, all the devs for their awesome work, XDA members who are on here helping people out. I have learned so much just by reading
UPDATES
10/4/12-New method of flashing recovery added. No card reader needed for those that do not have engsoff or the modified hboot from the AAHK-learned this method from Glevitan
3/14/12--Updated links in OP
2/12/12-- Here are some mirrors for the PD98IMG files that were hosted on multiupload. Hopefully multiupload isnt down for good, so in the mean time i have them on depositfiles
Inspire 4g stock Rom: http://depositfiles.com/files/4ofstmcse
Telus DHD stock Rom: http://depositfiles.com/files/mec1ycc7k
WWE DHD Stock Rom (Sense 3.0) : http://depositfiles.com/files/nmxfys544
CWR Recovery-make sure to rename
http://hoxnet.com/droid/PD98IMG_cwm5026_recovery.zip
1/26/12- note for all, because of recent events regarding megaupload, those links do not work. Simply use and alternate
1/7/12- changed link to ruu's. Old link no longer had dhd version only NAM versions. Thanks to football for.the link
12/23/11-included note of flashing prerooted PD98IMG as a preferred preference so one doesnt have to reroot-Thanks fernandezhjr
I'm hoping to add a link to a preroot dhd pd98 to the guide. If one you know of a link I'll gladly add it
Reworded use of RUU to stock rom when referencing the PD98 file as to avoid confusion of RUU.exe that is run from a pc-Thanks preacher
Edited to cover up my newbish mistake. Maatsby knows why lol
haha, glad I could help. we all make newbish mistakes now and then, especially past a reasonable hour
One doesn't have to unroot if they don't want to flash the recovery through hboot. One can place a rooted version of the stock rom on the SD card as a pd98img zip and boot into hboot. Once flashed, just go to the market and install rom manager and flash recovery from there. At this point, one is rooted stock and free to flash a custom rom at any time. This saves from the need to reroot the device. Of course this is provided one already has s-off when the problem hit.
Sent from my HTC Inspire 4G using Tapatalk
fernandezhjr said:
One doesn't have to unroot if they don't want to flash the recovery through hboot. One can place a rooted version of the stock rom on the SD card as a pd98img zip and boot into hboot. Once flashed, just go to the market and install rom manager and flash recovery from there. At this point, one is rooted stock and free to flash a custom rom at any time. This saves from the need to reroot the device. Of course this is provided one already has s-off when the problem hit.
Sent from my HTC Inspire 4G using Tapatalk
Click to expand...
Click to collapse
I did make in the note of guide, though it was in the last step. Ill add a note further up. I didn't suggest that way first as I dont have a link for a prerooted pd98 for dhd users. In the inspire section I did recommend the easier way as you suggested. Ill see if I can find a prerooted dhd pd98 and add it
marsdta said:
I did make in the note of guide, though it was in the last step. Ill add a note further up. I didn't suggest that way first as I dont have a link for a prerooted pd98 for dhd users. In the inspire section I did recommend the easier way as you suggested. Ill see if I can find a prerooted dhd pd98 and add it
Click to expand...
Click to collapse
When I made my post, I was lost and thought I was in the Inspire thread. Lol. I knew I had seen this over there last night, but it disappeared on me. What happened is a mod quickly stickied it and I hadn't clicked on the stickies tab earlier. I see where you suggested it now.
Sent from my HTC Inspire 4G using Tapatalk
thanks. u just save my phone.
Potential to stickie, a really clear and useful guide.
Sadly, didn't worked for me
This guide helped me alot! Worked perfecly and now i run a 4.0 android rom
Hey, you exactly explained what my problem is and obviously solved for some cases. But unfortunately, links don't work due to idiocratic SOPA. Hence please review the links so we can solve our problems. Thanks in advance.
q995 said:
Hey, you exactly explained what my problem is and obviously solved for some cases. But unfortunately, links don't work due to idiocratic SOPA. Hence please review the links so we can solve our problems. Thanks in advance.
Click to expand...
Click to collapse
All links work, just don't use the megaupload links
I've tried everything that has explained but unfortunately it didn't work out for me.
Thanks..Very helpful, for noobs like me..
do too MultiUpload being down lately I uploaded mirrors to the pd98imgs. Please see second post
I also uploaded two WWE version the RUU for those that want them. Hopefully faster downloads than that on the filefactory link
GB Sense 2.1 2.50.405
http://depositfiles.com/files/2wlrviqhg
GB Sense 3.0 3.12.405
http://depositfiles.com/files/gsi0uoeu4
Sorry For Being a Noob
Hi guys, my Desire HD was installing the update and i didnt think that it was doing anything so I pulled the battery, has not turned on since :/ although it is currently on charge and the orange light is on.
Any Ideas would be greatly appreciated,
Many thanks,
Sam
tmobile help please
Please can anybody download t mobile ota update ? i need to flash the update zip file to my t mobile dhd because i have installed tmobile ruu and my phone wont boot it is stuck in t mobile boot loop i have no root and my hboot says
ACE PVT SHIP S-OFF RL.
I have an unbranded dhd but i dont know if i can install tmobile ruu on to it to download the tmobile ota update myself.. i have done this with my htc bravo's
one was virgin and the other was unbranded i was able to s-off the unbranded bravo using revolutionay.io and install virgin ruu on it and downloaded the ota zip file but didnt install it and copied it to my virgin bravo and installed the update can i do this with dhd ace ?
if you have supercid on the unbranded you can do that, though i dont think the ota will get you out of the bootloop. When you installed the tmo RUU it does take about 15 min to do its thing. did you give it enough time?
You could reflashing the Tmo ruu, but since your soff i would personally use the WWE version
Sorry Guys looking for some extra help, I was flashing a radio on GB and something went wrong... I am running a custom rom and am rooted with ENG s-off.
when I start i get a black scree for about 10-15 minutes, then I get a white screen with HTC on it and it vibrates for a good 5 minutes, then it goes to a white HTC screen with quietly good (or something similar) and eventually the phone will start.
I had ext4 CWM installed on it originally but I do not get any recovery options either in HTC or CWM.
I've tried using the instructions here with adb a recovery image to no avail.
The phone is currently 2.3.5 with HTC sense it was Android Revolution HD 6.3.2 by mike 1986.
---------- Post added at 11:30 PM ---------- Previous post was at 10:41 PM ----------
Hunterdiver said:
Sorry Guys looking for some extra help, I was flashing a radio on GB and something went wrong... I am running a custom rom and am rooted with ENG s-off.
when I start i get a black scree for about 10-15 minutes, then I get a white screen with HTC on it and it vibrates for a good 5 minutes, then it goes to a white HTC screen with quietly good (or something similar) and eventually the phone will start.
I had ext4 CWM installed on it originally but I do not get any recovery options either in HTC or CWM.
I've tried using the instructions here with adb a recovery image to no avail.
The phone is currently 2.3.5 with HTC sense it was Android Revolution HD 6.3.2 by mike 1986.
Click to expand...
Click to collapse
Fixed it thanks ....
managed to solve the delay after booting by following these steps:
Q&A DHD Page 175 post 1749 lebsir
Hello! I have a Desire HD that is stuck at the Hboot, no recovery or anything.
I managed to flash some ROMs, either through Hboot or RUU but even then, the phone stays stuck at Hboot.
I tried many official ROMs and RUUs. The ones that can be flashed succesfully are the main zip from this thread (WWE Stock Rom) and the two Sense 3.0 WWE RUUs.
The update process seems to proceed fine, but at the end, when I reboot the device, it gives me 7 vibrations at the white HTC screen, then the screen goes black and stays stuck for ever (or at least for 2 hours).
I do not know much about the device, only that it had a custom rom and one day this happened.
If you have any suggestions or ideas, I'd be glad to hear. Even some generic (short) answers will do if you have any idea at all.
HTC service says that because of the custom software, the phone isn't anymore under warranty and they need to replace the motherboard.

Categories

Resources