Database Users

[Q] Enable TPT on factory Gen2?

I've searched both Google and this forum, but I can't find a clear answer.
A friend asked me to install CM7 on his Blade which is Gen2, but the problem is I don't want to brick his phone trying to enable TPT for the sole purpose of avoiding permanent bricks, which would be incredibly ironic.
So the question is; can you enable TPT on a phone that has never been a Gen1?
This probably boils down to whether a stock Gen2 is close enough software-wise to an upgraded Gen1.
Thank you for your time.

Huh? CM7 is meant for Gen 2, you can just root, install CWM and flash CM7.

k0zmic said:
Huh? CM7 is meant for Gen 2, you can just root, install CWM and flash CM7.
Click to expand...
Click to collapse
Yeah, I know because I have a Gen2 converted Gen1 myself, but TPT would come in handy if he ever manages to mess it up (bad update, playing with root, other unpredictable stuff).
With my HTC Magic I once managed to damage the system so badly it became close to bricked with both recovery and Android unbootable. The one thing that saved me was fastboot. Since then I always make sure to have a way of spoonfeeding an update in case everything else fails, the harder to break the better (I'd imagine breaking fastboot is hard, but it requires a computer with the Android SDK tools and in his case working drivers).
The question still stands; can you enable TPT on a phone that has never been a Gen1?

Oh I understand now.
IT WILL NOT WORK ON NATIVE GEN2 DEVICE WHICH WERE SHIPPED WITH 2.2. sorry! but it does no harm since the TPT will not start.
Click to expand...
Click to collapse
From the TPT page on Modaco.

Thanks
k0zmic said:
From the TPT page on Modaco.
Click to expand...
Click to collapse
I found it now, it's in the thread about the CM7 TPT images, in bold caps right before the first step. *facepalm*
Ah well, at least a Google search for "gen2 enable tpt" will point people with the same question here.

Well, as I understand it, it is possible, but difficult. When you upgrade to gen2 with old Windows flasher method, you get no TPT too (you basically get factory gen2). But it is possible to downgrade back to gen1 and then use TPT to go to gen2. So the same should be possible with factory gen2.

digital0 said:
Well, as I understand it, it is possible, but difficult. When you upgrade to gen2 with old Windows flasher method, you get no TPT too (you basically get factory gen2). But it is possible to downgrade back to gen1 and then use TPT to go to gen2. So the same should be possible with factory gen2.
Click to expand...
Click to collapse
Yeah it's possible, I think you just have to be careful to backup those .nvm files to prevent the loss of your IMEI.
Out of interest since I used the Windows method, why do you want to downgrade to Gen 1 and upgrade again with the TPT?

I'm sorry that I cant post the link, I guess I better post some spam to get my post count up...
google "Flashing modified firmware to a stock Gen2 phone". Its a guide by me, hedgepigdaniel, on modaco.
this guide will help you to do what you want.

danielplayfaircal said:
I'm sorry that I cant post the link, I guess I better post some spam to get my post count up...
.
Click to expand...
Click to collapse
Look in the General section there's a few silly threads there so you can + your post counts.

anyone have a backup copy of 4.010.11?

So I don't remember what build I originally had, didn't backup my ROM bcus im a nub, made a mistake editing a file in system/lib which caused my tablet not to boot past the android screen. Came to this forum for some help, kjy2010 came to my rescue. provided me with a full build of 4.010.40 GEN1, placed update.zip in external SD, booted into recovery mode & let it do its thing. worked like a charm & fixed my issue, but then someone said I should have a US build, can anyone tell me why? if so.. anyone have a copy of 4.010.11 they can provide me with & how I would go about to install it. Is it the same concept as done before? Really the main thing is, will I have issues downloading new updates? if I don't switch to 4.010.11.. or will I have an issue regardless bcus I don't have the original ROM.. & if so.. how am I going to be able to work around it in the future.

HD87 said:
So I don't remember what build I originally had, didn't backup my ROM bcus im a nub, made a mistake editing a file in system/lib which caused my tablet not to boot past the android screen. Came to this forum for some help, kjy2010 came to my rescue. provided me with a full build of 4.010.40 GEN1, placed update.zip in external SD, booted into recovery mode & let it do its thing. worked like a charm & fixed my issue, but then someone said I should have a US build, can anyone tell me why? if so.. anyone have a copy of 4.010.11 they can provide me with & how I would go about to install it. Is it the same concept as done before? Really the main thing is, will I have issues downloading new updates? if I don't switch to 4.010.11.. or will I have an issue regardless bcus I don't have the original ROM.. & if so.. how am I going to be able to work around it in the future.
Click to expand...
Click to collapse
First post here has the link for the full 4.010.40 Gen 1
http://forum.xda-developers.com/showthread.php?t=1175136
After you install check for updates and it will update you to. 13
I went back to. 40 , as it seemed a bit more polished to me....IMHO anyway!

Sorry that link was pulled.
Here is another from someone else that uploaded it though.
http://www.megaupload.com/?d=VVIY3ZCD

ooops I meant to post. 11, not. 40
The link is for. 11 the one you're looking for bro.

confusing. . . Lol

The Odom Project said:
confusing. . . Lol
Click to expand...
Click to collapse
Yeah, the original thread had a link that was down, plus I typoed the incorrect build, but the correct link to the file he asked for is there.
No "thanks" for you lol!

I am now on 4.010.11 Gen2, USA, rooted with iconia root 1.3, stock rom. I will like to make a backup of my this setup. Can someone help me with some instructions. Which tool do I use, etc.
Thanks!

Rican2008 said:
I am now on 4.010.11 Gen2, USA, rooted with iconia root 1.3, stock rom. I will like to make a backup of my this setup. Can someone help me with some instructions. Which tool do I use, etc.
Thanks!
Click to expand...
Click to collapse
Market....get Acery Recovery Installer. After you install it, go into the app and have it install Clockwork recovery mod, miking sure you click yes when it asks you to backup your recover image.
Here is the thread on CWM, although you no longer need to push to install thanks to Acer recovery installer:
http://forum.xda-developers.com/showthread.php?t=1126364
Then follow this thread to make your full backup of your ROM:
http://forum.xda-developers.com/showthread.php?t=1155664
That should do ya!

kjy2010 said:
Market....get Acery Recovery Installer. After you install it, go into the app and have it install Clockwork recovery mod, miking sure you click yes when it asks you to backup your recover image.
Here is the thread on CWM, although you no longer need to push to install thanks to Acer recovery installer:
http://forum.xda-developers.com/showthread.php?t=1126364
Then follow this thread to make your full backup of your ROM:
http://forum.xda-developers.com/showthread.php?t=1155664
That should do ya!
Click to expand...
Click to collapse
Yea im abit confused too.. the link is for Acer_A500_1.139.04_4.010.40_COM_GEN1 which from what I understand is not a US build. My question is, what's the difference? how does it affect future updates.. currently im on Kernel v2.6.36.3 Build# 4.010.40 GEN1

HD87 said:
Yea im abit confused too.. the link is for Acer_A500_1.139.04_4.010.40_COM_GEN1 which from what I understand is not a US build. My question is, what's the difference? how does it affect future updates.. currently im on Kernel v2.6.36.3 Build# 4.010.40 GEN1
Click to expand...
Click to collapse
Mainly the differences are in the software you get with the tablet and certain underlying factors in the settings, like what channels are allowed in wifi....especially wifi n which allows a greater variety of channels, bands, etc. The world around uses different channels based on government regulations/standards.
I suspect this is why a number of people have issues with connecting to Wifi. They get ROMS from XDA, update their U.S tablets with foreign ROMS and vice versa and then have wifi issues.
You technically don't HAVE to be on a U.S version if you're in the U.S, but for the reasons above, I wouldn't ever recommend using a foreign ROM.

HD87 said:
Yea im abit confused too.. the link is for Acer_A500_1.139.04_4.010.40_COM_GEN1 which from what I understand is not a US build. My question is, what's the difference? how does it affect future updates.. currently im on Kernel v2.6.36.3 Build# 4.010.40 GEN1
Click to expand...
Click to collapse
I'm in US, same build as you are, no wifi issues, the GPS.conf is set to north America, and IMHO it's more stable and fluid than the current US build. Just my opinion, and. 02c

Full (not OTA) Acer_A500_7.006.01_COM_GEN2

No one seems to show GEN2 any love. Its all GEN1 and CUS7. For those that want GEN2 (I live in US), well here you are. A full image for Acer_A500_7.006.01_COM_GEN2. This is not edited in any way. (This means not rooted). This is probably not going to be useful to the average person. For a modified (but rooted) ROM of this, look here
This is not OTA and can be used without ClockWorkMod (CWM) or any modifications of any kind.
Unzip Acer_A500_7.006.01_COM_GEN2.zip and place update.zip on the root of your SD card.
I should also mention this is Honeycomb 3.2 for those that don't keep track of the build numbers (and who can blame you?), and this DOES have a locked bootloader. But, nevertheless, and valid source for flashing and other things!
Acer_A500_7.006.01_COM_GEN2.zip
http://www.megaupload.com/?d=ZTKEMFF6
Enjoy!

thank you so very much for this. Where did you get it? as soon as i get it downloaded Im going to add it to dropbox and post the link here if that is ok with you.
Here is a dropbox link to the file: http://dl.dropbox.com/u/26368270/Android/tablet/Acer_A500_7.006.01_COM_GEN2.zip

Where does anyone get anything? Google, where else?
Do whatever you want with the file. If you search the web log enough you'll find it, too.

Hi. I have a question....is it rooted? I would hate to update it and lose root. Thanks. Excuse the question, Im fairly new to the Acer scene (1 week).
Sent from my HTC Glacier using XDA App

This is not rooted, it is also bootloader locked. I do not recommend this for you. Try another rom that is 3.2, there are plenty now!

Ty, been waiting for a GEN2 to add to my collection.

Thanks for the heads up. Im running Honeyvillain 1.2 but Im curious about the GEN2, as Im in the US as well. I dont know what the differences are, but so far its working smooth, smoother than any other ROM out there.
Sent from my HTC Glacier using XDA App

GamezR2EZ said:
No one seems to show GEN2 any love. Its all GEN1 and CUS7. For those that want GEN2 (I live in US), well here you are. A full image for Acer_A500_7.006.01_COM_GEN2. This is not edited in any way. (This means not rooted). This is probably not going to be useful to the average person. For a modified (but rooted) ROM of this, look here
This is not OTA and can be used without ClockWorkMod (CWM) or any modifications of any kind.
Unzip Acer_A500_7.006.01_COM_GEN2.zip and place update.zip on the root of your SD card.
I should also mention this is Honeycomb 3.2 for those that don't keep track of the build numbers (and who can blame you?), and this DOES have a locked bootloader. But, nevertheless, and valid source for flashing and other things!
Acer_A500_7.006.01_COM_GEN2.zip
http://www.megaupload.com/?d=ZTKEMFF6
Enjoy!
Click to expand...
Click to collapse
You might want to add this to this thread so Vache can add it to the list?
http://forum.xda-developers.com/showthread.php?t=1113878

elcanela said:
Thanks for the heads up. Im running Honeyvillain 1.2 but Im curious about the GEN2, as Im in the US as well. I dont know what the differences are, but so far its working smooth, smoother than any other ROM out there.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Yea I wouldn't worry 2 much about GEN2. If you have a choice, get GEN2. Otherwise it doesnt matter. The differences are mostly system files related to keyboards and databases and such from what I have dissected.
Like spelling color as colour and other oddities.
That and different bloatware, not all the same as the US
kjy2010 said:
You might want to add this to this thread so Vache can add it to the list?
http://forum.xda-developers.com/showthread.php?t=1113878
Click to expand...
Click to collapse
He has been PM'd
But I am fairly certain he already had this. Or at least the COM1 version.

Ah, got it. Thanks again.
Sent from my HTC Glacier using XDA App

thanks alot been waiting on gen2 to start making a new rom

GamezR2EZ said:
Yea I wouldn't worry 2 much about GEN2. If you have a choice, get GEN2. Otherwise it doesnt matter. The differences are mostly system files related to keyboards and databases and such from what I have dissected.
Like spelling color as colour and other oddities.
That and different bloatware, not all the same as the US
He has been PM'd
But I am fairly certain he already had this. Or at least the COM1 version.
Click to expand...
Click to collapse
Thanks, it's nice to have one thread where one can find the proper stock ROM for their tab. He had no COM2 HC 3.2 ROMs on the list.

GamezR2EZ said:
Where does anyone get anything? Google, where else?
Do whatever you want with the file. If you search the web log enough you'll find it, too.
Click to expand...
Click to collapse
The reason I asked where you got it, is because I have been searching since friday for this. I have been searching google for every keyword I could think of.

bdubble said:
thank you so much. you posting this got my tab unbricked. it was saying boot verified failed at the acer logo, i stupidly tried to downgrade from 3.2. i used this and the stock recovery and it booted. i tried with every stock rom on the forum, but couldnt get the decrypter to work, finally your post saved me having to ship it to acer in texas.
Click to expand...
Click to collapse
Vache has a downgrade image to Acer_A501_1.309.02_COM_GEN1 that will work with the new locked bootloader. Root that image then install CWM THEN install a custom rom. That will prevent the boot verification issue!

GamezR2EZ said:
Vache has a downgrade image to Acer_A501_1.309.02_COM_GEN1 that will work with the new locked bootloader. Root that image then install CWM THEN install a custom rom. That will prevent the boot verification issue!
Click to expand...
Click to collapse
Thank you for this info. As soon as I get my replacement, I will do this if needed and install your 3.2 rom. I love having root, but want a 3.2 rom that is not from an a501 constantly asking me to install sim card.

hroberts89436 said:
Thank you for this info. As soon as I get my replacement, I will do this if needed and install your 3.2 rom. I love having root, but want a 3.2 rom that is not from an a501 constantly asking me to install sim card.
Click to expand...
Click to collapse
That problem can be solved by adding the line "ro.carrier=wifi-only" in the buildprop (you can do this with es file explorer or root explorer) and reboot.

sorry mis post wrong thread

GamezR2EZ said:
No one seems to show GEN2 any love. Its all GEN1 and CUS7. For those that want GEN2 (I live in US), well here you are. A full image for Acer_A500_7.006.01_COM_GEN2. This is not edited in any way. (This means not rooted). This is probably not going to be useful to the average person. For a modified (but rooted) ROM of this, look here
This is not OTA and can be used without ClockWorkMod (CWM) or any modifications of any kind.
Unzip Acer_A500_7.006.01_COM_GEN2.zip and place update.zip on the root of your SD card.
I should also mention this is Honeycomb 3.2 for those that don't keep track of the build numbers (and who can blame you?), and this DOES have a locked bootloader. But, nevertheless, and valid source for flashing and other things!
Acer_A500_7.006.01_COM_GEN2.zip
http://www.megaupload.com/?d=ZTKEMFF6
Enjoy!
Click to expand...
Click to collapse
I live in the us and while I have rooted my a500 I haven't installed a custom rom yet because the few stock roms are gen1. I want to stay as close to stock as possible and would love to have this 7.006.01_com_gen2 with just root and and bootloader fixed. I thought your "clean" rom might work for me but I'd prefer to have just the stock rom with few modifications. Any idea where I might find something like that?

golfgirl606 said:
I live in the us and while I have rooted my a500 I haven't installed a custom rom yet because the few stock roms are gen1. I want to stay as close to stock as possible and would love to have this 7.006.01_com_gen2 with just root and and bootloader fixed. I thought your "clean" rom might work for me but I'd prefer to have just the stock rom with few modifications. Any idea where I might find something like that?
Click to expand...
Click to collapse
Check my post at:
http://forum.xda-developers.com/showthread.php?p=18146210#post18146210

kekinash said:
Check my post at:
http://forum.xda-developers.com/showthread.php?p=18146210#post18146210
Click to expand...
Click to collapse
I am using this rom from what I can tell so far its Very Stock Rooted and no issues at all.
Thanks. I installed this over stock slightly modified 3.1 I did wipe /format partitions. Then restored my ti backup.complete secess

Hard unlock Sim

I have asked to my telecoms operator the unsimlock code for my Defy, it said is yet unlocked but it is not
I have flash a full sbf 2.3.6. Before it was a 2.3.4.
Motorola can't give any code.
Is there a way to show to the operator that is still locked? Or a non paid way to have the unlock code (it's free with my operator)
I know that is a way to have a soft unock but only with cm7 or miui.
But i prefer a hard unlock for motorola rom.
THX.
Defy+ / 4.5.1-134_DFP-139 / 45.0.1390.MB526.Retail.en.FR
Bouygues telecom fr.

Always complain in a retail center. Take your defy, show him, let him call to services. Be persistent, not rude.
Indeed you could use a softunlock for CM7 or MIUI, don't know if you could for stock.

Thx for the answer. I have try this morning the softunlock with cm7 Nightly ( the only one cm7 i can install) but don't work . I think that the softunlock is only for 2.2.

Could you please try to install the nightly again and then flash the zip from my latest post on that threat?
Edit:
The zip
http://forum.xda-developers.com/attachment.php?attachmentid=908455&d=1329605492

Also you can try to write at russian forum - motofan.ru ( i'm not able to post link there...)
Just write IMEI and your model to them, probably you'll receive unlock code.
If you won't, only way is patch.

labsin said:
Could you please try to install the nightly again and then flash the zip from my latest post on that threat?
Click to expand...
Click to collapse
Thx. i have try but don't work anymore. I have flashed the cm7 zip, then, before reboot, flashed your zip. Trying to change baseband too but don't work.

Hellmanor said:
If you won't, only way is patch.
Click to expand...
Click to collapse
Yes, but for the moment not possible to find any patch for 2.3

Witch CM7 version are you using? Could you attach the files in defy_simlock_originals on your sdcard?

Could do the froyo for bl6 patch it from there and re install cm7
teamwork makes the dream work

labsin said:
Witch CM7 version are you using?
Click to expand...
Click to collapse
cm72-120127.0846-NIGHTLY-Defy+.zip
others don't work because of a 2.3.6 full sbf.
labsin said:
Could you attach the files in defy_simlock_originals on your sdcard?
Click to expand...
Click to collapse
Sorry but i don't understand what you want to say.
Could do the froyo for bl6 patch it from there and re install cm7
Click to expand...
Click to collapse
Do you mean to follow this way below? But i'm afraid this way don't work with Defy+?
Common Problems/Questions
Black Screens when booting up: (!) Tried to install a version of Android with a lower CG Version than the one currently on the phone.
Weird behavior after installing a Fixed SBF: Install a matching Nandroid backup with your SBF, and remember to clear Cache/Dalvik Cache using Recovery.
Installed full Gingerbread SBF and can’t go back to another rom: (!) aha! We have a issue here!, latest Stock Gingerbread full SBFs comes with a Version 5 of the CG, meaning until not long ago you were pretty much screwed. But wait, there is hope! A one kind Éclair has been found in China Defys that comes with Version 5 CG!.
How to fix it:
Download this SBF and Flash it
Root your Phone
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery
Download and install this Nandroid Backup
Enter Recovery, Wipe Data/Cache
After wiping, turn off your phone
Turn it on and get immediately into Bootloader mode
Flash this Fixed SBF
Delete Data/Cache again and reboot.
You WONT be able to install full SBFs of any Éclair or Froyo since these Androids have lower CG Versions.
**NOTE*: I just rephrased the original post since it can be a bit confusing, it is linked as source below.
**NOTE2**: If you are using a non-Chinese defy, DO NOT USE THE CAMERA FLASH while on the Chinese rom, it WILL kill your LED.
Source: ((Original post here))
How to Install CM7 after Installing a Full Gingerbread SBF: (!) Ok, first of all do all the steps above on "Installed full Gingerbread SBF and can’t go back to another rom"
Root your Defy (Using SuperOneClick 1.7 and not 1.9).
Install SystemRecovery from GoAPK. If you install 2nd init, you'll just get into a boot loop and have to start over.
Reboot to recovery. Do a factory wipe, then do the cache wipe.
Install CM7 .Zip and then gapps zip file. DO NOT wipe again, you'll just go back to 2.2.2 CEE (if you accidentally do this, you can pick up again from step 3).
profit!
Click to expand...
Click to collapse

Yes it works with Defy+ if you are on a bld6 rom (not for the bld7 roms)
My patch from a couple posts back makes a copy of the patched file on your sdcard in the folder defy_simlock_originals. Could you post them here?
Don't know if the module works with the gingerbread kernel. That's why it is a good idea to try to get CM7 with froyo kernel. It's also handy if you wan't to install other roms (WIUI ...)
But could you fist give those files? Maybe i've made a mistake again ^^.
Edit:
Sorry you don't have the right guide. That one is for bld5 downgrade.
Here is for bld6: http://forum.xda-developers.com/showthread.php?t=1486731

labsin said:
My patch from a couple posts back makes a copy of the patched file on your sdcard in the folder defy_simlock_originals.Could you post them here?
Click to expand...
Click to collapse
Again, thank you for your help and time
(I have put .txt for upload)

The file is similar to the normal defy one as far as I can tell that must have done it... So prob. faullt of different kernel. You could try to downgrade and use CM7 on froyo kernel.

labsin said:
The file is similar to the normal defy one as far as I can tell that must have done it... So prob. faullt of different kernel. You could try to downgrade and use CM7 on froyo kernel.
Click to expand...
Click to collapse
Ok i'll try tomorrow

labsin said:
The file is similar to the normal defy one as far as I can tell that must have done it... So prob. faullt of different kernel. You could try to downgrade and use CM7 on froyo kernel.
Click to expand...
Click to collapse
I have change the kernel with THIS METHOD
after, try with WIUI 2.2.17: no network; then with update-cm-7.1.0-11-Defy-signed: no network, even when changing baseband.
So, if all that i have made is right, maybe it's not fault of kernel.
Other difference between MB526 and MB525?

You get 'no network' all the time, even with the sim from the right provider, also without the patch?
I think you're the fist to try on a defy+. Maybe look to the Russian fora...
edit: And can you tell me what your Baseband version is? (in settings > about)
edit2: If it is EPU93_U_00.59.01 Try it after installing RC1.5 from here: http://www.defy-cm.net/jordan-cm7.1-RC/

labsin said:
You get 'no network' all the time, even with the sim from the right provider, also without the patch?
I think you're the fist to try on a defy+. Maybe look to the Russian fora...
edit: And can you tell me what your Baseband version is? (in settings > about)
edit2: If it is EPU93_U_00.59.01 Try it after installing RC1.5 from here: http://www.defy-cm.net/jordan-cm7.1-RC/
Click to expand...
Click to collapse
no network only with wrong provider: with the patch no code ask, but no network even with other baseband.
Yes it is EPU93_U_00.59.01 (cm7.2 working on defy+ as well)
with RC1.5 no boot after files install, stuck on google logo.
Now i have flash fix sbf to use 2.3.6 rom because of no battery problems and better battery life. So i'll wait and ask again to my operator.
Now baseband is EPU_U_00.60.03
Do you think if i'm able to put a official operator rom it will see that is no desimlocked? i don't have made backup of my official rom (newbie mistake ) so i have ask here if it's possible with this method.

Blocking by TI OMAP 3630
I have read this:
Blocking the Bootloader by TI OMAP 3630
Why and how is it locked Defy?
While Linux is Open Source Motorola keeps the Defy the locked bootloader. Why?
For commercial reasons of course: avoid too many warranty returns from sorcerer's apprentices who brické their phone, for example (although care is denied you still have to manage the folders!) But also the traders (who manage some of the guaranteed returns, but not that ... we shall see below).
So Motorola maintains bootoader of our favorite phone is not locked and ready to unlock the last views of Roma making the switch to SBF rootage and even more difficult. But the fact how this lock is it made?
Unlike other phones (other brands, but also other brand models *) easy to unlock, the Defy is equipped with a TI OMAP 3630 chip that manages its technology via "M-Shield technology 'in this block. So we did not do a software problem but rather a problem if one CPU is addressing this release.
This technology also manages the simlockage phone which also explains why the operators are far from favorable to the release of Defy.
No one arrived today to crack this lock: it should have the tool from Texas Instruments where he provided to authorized repairers to put the Motorola Defy mode "SE" (Systems Engineering) for this.
* These phones using Qualcomm chips or other, do not bénéfiecient techonologie the M-Shield and are much easier to unlock.
Click to expand...
Click to collapse
(Google trad) Or here in french

stucked at jrdan u97.21.51
I am new at this my defy went dead when tried to upgrade to 2.2 did not have backup. I searched the web and only jrdan u 97.21.51 will work and canot go back or change any more to any other roms. tried the rsd lite to flash diferent roms and nothing works. tried rom manager and 2ndinit recovery and nothing i get black screen. Is there anyway to get out of this? Please help

sion123 said:
I am new at this my defy went dead when tried to upgrade to 2.2 did not have backup. I searched the web and only jrdan u 97.21.51 will work and canot go back or change any more to any other roms. tried the rsd lite to flash diferent roms and nothing works. tried rom manager and 2ndinit recovery and nothing i get black screen. Is there anyway to get out of this? Please help
Click to expand...
Click to collapse
Wrong thread i think.
Have you try a wipe cache and data in stock recovery before rsdlite? see here how to do with Froyo

[Q] How to check version of ZTE blade without ROM

Hi.
My friend "bricked" his ZTE Blade.
We want to try unbrick it, but we must find what version of Blade it really is (I (gen1/gen2, II...).
We can't get also in recovery/FTM/fastboot
Is there any way to do it? (we can't run the pigfish apk....)
Thanks

Ask him what version of android he had on it,
generally speaking if it came with android 2.1 it'll be gen1 and if it came with 2.2 it'll be gen2, there have been reports of users having 2.2 gen1 but 99% of the time you can rely on this. that's why blade checker and ask mr pigfish have to check details in the kernel to establish if it is gen1 or gen2 but considering it is bricked this is what you'll have to go on

OK, thanks, I will ask.
I think that he flashed bad gen version of CM7.
I hope that we can solve it with TPT (phone still boot into green android) but I'm afraid that with flashing bad TPT we can totally brick it...
BTW ZTE Blade gen2 is different from Blade II right?

Benik3 said:
OK, thanks, I will ask.
I think that he flashed bad gen version of CM7.
I hope that we can solve it with TPT (phone still boot into green android) but I'm afraid that with flashing bad TPT we can totally brick it...
BTW ZTE Blade gen2 is different from Blade II right?
Click to expand...
Click to collapse
If he flashed anything above CM7.0.0 and it doesn't boot, he'll have a gen1, I think CM7.0.0 is the only gen1 official CM.
Have you tried booting into recovery? Power on with volume down if I remember correctly. If not try volume up.
Yeah ZTE blade gen2 is different from the Blade 2
Sent from my LT30p using Tapatalk 2

OK.
Yes, he tried to boot it with vol+/- or also with home button, but nothing.
Also I must ask, if it wasn't CM7.2, thats for gen2 right?
I didn't have the phone in my hand yet. Maybe next week...

Benik3 said:
OK.
Yes, he tried to boot it with vol+/- or also with home button, but nothing.
Also I must ask, if it wasn't CM7.2, thats for gen2 right?
I didn't have the phone in my hand yet. Maybe next week...
Click to expand...
Click to collapse
CM7.2 is gen2 only, was that the one he flashed?
If so he will have a gen1 phone as if it isn't booting then it must be that.
Sent from my LT30p using Tapatalk 2

New info
He tried to flash CM7 via original recovery manager.
Also he said, that in Czech Republic isn't gen1, so it should be gen2...

Benik3 said:
New info
He tried to flash CM7 via original recovery manager.
Also he said, that in Czech Republic isn't gen1, so it should be gen2...
Click to expand...
Click to collapse
Via rom manager? Okay so if you're sure it's gen2 try flashing a gen2 compatible TPT or if you can get into fastboot make sure to flash a gen2 compatible recovery
Sent from my LT30p using Tapatalk 2

Yeap, we will try it, thanks for help!