I have an 1.3 rev Samsung Focus. It was an unlocked model I got from outside. I was in the US at the time of Mango update and updated my phone with Mango from AT&T. Now I have moved out of the US and want to unlock it. AT&T doesn't have the unlock code because I didnt purchase it from them. Any Ideas on what I can do? Will a custom ROM help me with Unlock? When I check lock status, it is SIM Lock is Disabled, only Network lock is enabled.
I'm not sure what you meant by "It was an unlocked model" in the context of "out of the US and want to unlock it". Was it unlocked or locked? Anyway:
Read the wiki, (carrier) locks are in NVRAM, no relation to flashing whatsoever, so any custom ROM won't SIM unlock your phone.
Have you tried ebay? Unlock is cheap as $1 and it doesn't hurt to try (unlock via IMEI - I unlocked AT&T and Rogers Focuses). If that fails, I recommend fastgsm, I've unlocked my own AT&T Focus with them, via USB (no affiliation).
EnderPsp said:
I'm not sure what you meant by "It was an unlocked model" in the context of "out of the US and want to unlock it". Was it unlocked or locked? Anyway:
Read the wiki, (carrier) locks are in NVRAM, no relation to flashing whatsoever, so any custom ROM won't SIM unlock your phone.
Have you tried ebay? Unlock is cheap as $1 and it doesn't hurt to try (unlock via IMEI - I unlocked AT&T and Rogers Focuses). If that fails, I recommend, I've unlocked my own AT&T Focus with them, via USB (no affiliation).
Click to expand...
Click to collapse
It was carrier unlocked, as in I could place any sim in the phone and it would work. After I updated it on my Zune with Mango, it was loaded with AT&T's version and hence locked to AT&T. Now AT&T doesn't have the record of the IMEI in their database and aren't able to provide me with an unlock code. They were able to provide the unlock code for my other windows phone that I purchased from AT&T. Thereby lies my predicament. Let me try the ebay version, if not I hope FastGSM works. Thanks.
I was not able to get the unlock code from ebay. But FastGSM seemed to work wonders. I used their USB unlocking tool and it worked just fine. Thanks for the tip.
Related
I have entered my unlock code from AT&T and it worked fine. I did find out the hard way that if you intend to use an unlock code supplied from AT&T you must use an AT&T firmware. If you use the Euro firmware on the AT&T to gain phone capabilities the AT&T supplies unlock code won't work. - yes, I know there are several ways to manually unlock your phone using Roto's method and others - this was just something I found interesting.
The question now is , if you use an AT&T unlock code and you then upgrade your firmware to the Euro firmware, will you loose the AT&T unlock?
is the Unlock lost during a .pit function.
just trying to learn more about how this works -
thanks
Anyone have any idea on this?
Just checking bac to see if anyone knows whether this will effect the AT&T Unlock - loading Euro firmware
Can You assist me on getting the code to unlock an AT&T tab?
I don't believe flashing a new rom should affect your subsidy lock status as long as it doesn't overwrite the efs partition. You should definitely do a rotobackup prior to flashing though, just in case.
I just purchased a unlocked my touch 3g ( I believe Magic) no slide.
At times my phone asks me to do a update.
When I look at what the update is it shows "Android System Update 1.2...The system is required to install Android version 2.2.1 on your device."
My phone states my firmware version is 1.6
So my questions are:
Do I need to perform this update?
Will this update lock my phone again ?
This is my 1st android phone and truthfully I'm not real technical. I have been going around googling different thing to make mysel more familar with the phone and Android.
Any help woul sure be appreciated.
Thanks in advance
Ok so 81 views and nobody knows.
Anybody have any idea what other sites out there may deal with this type of thing that they may be able to direct me to?
Thanks
Could you please provide the info on your fastboot? You can get to fastboot by turning the phone off, then turning it on while holding down the volume down button.
Sent from my Sapphire/dream using XDA App
Ok, I think this is what your looking for?
Saphire Put 32a Ship S- ON G
HBOOT-1.33.0013(SAPP31000)
CPLD-13
Radio-2.22.23.02
Oct 21 2009,22:33:27
I hope this helps and what you were asking for
Thanks
First off, you do not need to update if you don't want to. Second, I think the update will relock the phone, so I recommend not updating at all, unless you have a reliable method of unlocking again.
Sent from my Sapphire/dream using XDA App
I appreciate the info
Ok there are two things:
1) Sim Lock.. if your phone is sim unlocked it will remain sim unlocked.. actually I don't think there is any documented way to re-sim lock the phone.
2) Root.. if your phone is rooted i recommend installing a rooted version of the upgrade if you desire to upgrade.. otherwise the upgrade will either unroot the phone or fail because the phone is currently rooted (possibly causing it not to boot into android until you restore a good firmware)
Remember the sim lock is different from root.. and you can be rooted but sim-locked... or sim-unlocked but not rooted.. the simlock is just the tie in to the carrier and part of the Radio.. not part of the android firmware. Further its in a special radio settings region that is not flashed when you change the phone's radio.
So if you have the stock un-rooted/un-modified firmware and wish to update feel free.. just note you may want to back up what you can first.. some people have had problems with the update going slow until they factory reset after the update..
ezterry,
Thanks for the info.
Truthfully I'm unsure about many things on this phone.
I purchased this phone off Ebay as a unlocked only phone.
When I received the phone I just popped in my sim-set up the phone and was done.
At this point though I'm not even sure its unlocked because it is a T=Mobile phone and my service is myfamily mobile,which is just T-Mobile sold at Walmart.
I put in a sim card from my neighbors AT &T and it asked me for a pin #.
I skipped putting in a pin and the phone opened up but said no service. With that I am just assuming it is truly unlocked.
Am I correct?
Um.. if it asked for an unlock code its locked.. if it was sold unlocked and showing the code you ought to have been provided the code by the seller.
Pin usually just means the owner of the sim locked put a pin on the sim to prevent it from its data/service being accessed by others. (The sims owner ought to know the pin) This pin needs to be entered into any phone the sim is put in.
As soon as I find another person with a different sim card I am going to try it again.
I do think it was a pin # that was asked.
Unfortunately the owner did not provide any sort of code when I purchased.
Its my understanding,and I may be wrong,that you can purchase unlocked phones new,and if so I'm not sure weather or not codes are provided for new phones.
This is all very new to me so I am not sure.
exautomgr said:
Its my understanding,and I may be wrong,that you can purchase unlocked phones new,and if so I'm not sure weather or not codes are provided for new phones..
Click to expand...
Click to collapse
If a HTC Dream/Sapphire was sim locked at the factory you must put in a sim card from another carrier and unlock the phone.. If it was never locked (such as the Google versions of the phones) this is not needed.
Once Sim Unlocked it will remain so regardless.
Yes, this is a My touch 3g google version phone
exautomgr said:
Yes, this is a My touch 3g google version phone
Click to expand...
Click to collapse
MT3G = T-Mobile = locked to T-Mobile US but running the Google firmware
ION = Google Development Phone = factory sim unlocked
ezterry said:
MT3G = T-Mobile = locked to T-Mobile US but running the Google firmware
ION = Google Development Phone = factory sim unlocked
Click to expand...
Click to collapse
So does this mean the phone is not unlocked and can only be used on T-Mobile?
or
Is it possible someone paid a 3rd party for a code to un-lock it?
I guess I really need to try like a AAT & T sim and see if I could service,as that was my undrstanding. I was under the impression that any gsm service provider uising a sim card would be operable.
You have gone in a circle now.. I told you if its sim locked when you put in a sim of a diffrent provider it will ask for an unlock code.. once sim unlocked it will *never* be locked again.
You will of course need a non tmo-us sim to be sure.
All I know is the MT3G will have been shipped from the factory locked.. I will not know the current state since the seller prob made sure it was unlocked if it wasn't already so if the phone was sold unlocked ..
The only other way I know to test is harder to do and possible risky with the firmware changes to do it w/o special htc serial wires.
And FYI a pin protected sim will ask for the sims pin before the sims carrier can be read (thus you need to provide the sims pin before it will ask for the unlock code if the phone is sim locked)
Ok,gotcha.
Sorry,told you not to savy
So I'll test another sim again and see what happens.
Thanks again for all the support
ezterry said:
You have gone in a circle now.. I told you if its sim locked when you put in a sim of a diffrent provider it will ask for an unlock code.. once sim unlocked it will *never* be locked again.
You will of course need a non tmo-us sim to be sure.
All I know is the MT3G will have been shipped from the factory locked.. I will not know the current state since the seller prob made sure it was unlocked if it wasn't already so if the phone was sold unlocked ..
The only other way I know to test is harder to do and possible risky with the firmware changes to do it w/o special htc serial wires.
And FYI a pin protected sim will ask for the sims pin before the sims carrier can be read (thus you need to provide the sims pin before it will ask for the unlock code if the phone is sim locked)
Click to expand...
Click to collapse
Ok.
So I pulled the sim card from my neighbors AT &T phone and when the phone booted up it asked me for :
"sim network unlock pin"
unlock
dismiss
My neighbor told me he didn't have a sim pin,but he used the code he has to lock his phone.
I received the same message when I tried someone elses sim who also states they have no pin number.
Message being: "Network Unlock Request Un succussful"
So am I correct in my thinking that this phone is not unlocked? and or it is sim locked?
I just e-mailed the seller asking him if he had the unlock code for the phone,so I can now only wait for his response. In the past he was not very responsive to past e-mails
I have a ATT 930A that I successfully flashed with 930U and it works great. I was thinking of making sure it was SIM unlocked in case later I wanted to sell it, so I made a request of ATT for the unlock code but when I try it it tells me the unlock was unsuccessful. Do I need to go back to 930A to make the code work?
Probably yes
I don't think so. Just put in a non AT&T SIM and it's gonna ask for an unlock code
epofhouston said:
I don't think so. Just put in a non AT&T SIM and it's gonna ask for an unlock code
Click to expand...
Click to collapse
I did but the code att gave me didn't work.
So did the phone prompt for a SIM unlock code and you typed it in, got an error? What is the error? SIM lock should not change when you flash different ROMs yo the phone.
epofhouston said:
So did the phone prompt for a SIM unlock code and you typed it in, got an error? What is the error? SIM lock should not change when you flash different ROMs yo the phone.
Click to expand...
Click to collapse
Yes, after entering the code it says "incorrect network unlock code entered"
I had this problem with my S7. I had paid off my contract however every time I tried input my IMEI number to the AT&T unlock device website it would tell my my IMEI is invalid. i contacted AT&T customer service directly and gave them my informatio. They had to put the case in for the unlock code themselves. Reason was since i didn't finish the 2 years even though i paid off my contract it got lost in the system hope this helps
i know I posted earlier about a different issue, sorry for spamming the board.
I have a T-Mobile 1+6t with 9.0.15, i have been searching and tinkering all day and am still very confused about how to do this. From what I've seen, it is definitely possible, and every guide i've looked at is very simply laid out but i keep running into issues. Firstly, I have successfully converted to international version using the MSM tool. I thought this would be enough for my sim card to work but it is still not working. Now I am reading a bunch of other things about sim unlock and bootloader unlocking. Sorry but I am a noob at all of this. Can anyone point me in the exact direction in order for me to get my AT&T sim card working in my T-MOBILE 1+6t?
So my information is : TMOBILE 1+6t converted to International, running 9.0.15, and need to get AT&T sim card working.
What Ive done so far: converted to international.
What am I missing?
Before the conversion, you needed to get the carrier unlock code from TMo.
If you have not done that, you need to convert back to TMo firmware, get it unlocked from TMo, use the unlock app to unlock. After that you can flash the international firmware.
67BGTEV said:
Before the conversion, you needed to get the carrier unlock code from TMo.
If you have not done that, you need to convert back to TMo firmware, get it unlocked from TMo, use the unlock app to unlock. After that you can flash the international firmware.
Click to expand...
Click to collapse
is there a way around that? before i converted, i did see the unlock app and tried to use it but it said the device is not eligible. I called t-mobile and they said they'd send me instructions to unlock. But i am not totally sure if the phone is paid off, it was my gf's ex's phone who i don't know and she doesn't want to talk to
Right now i am trying something else - from the guides i've gathered, you need to be on 9.0.11 to unlock the bootloader and need the bootloader unlocked to unlock the sim, so:
I am downloading the files to downgrade to 9.0.11 international, unlocking the bootloader after that, then using this guide to unlock the sim. will this work?
There's no workaround.
If someone stole my TMo op6t and tried to use it in another network, he or she can't unlock it, as I own it and it may not have paid off.
Actually you can follow this guide ( https://forum.xda-developers.com/oneplus-6t/how-to/guide-sim-unlock-t-mobile-version-type-t3915269 ) to remove the Sim lock. In essence you'll convert it to international, erase the two modem files containing the Sim lock info, revert it back to the TMO version. Apply to OnePlus for your unlock token, wait a week to get it, then unlock bootloader. End result is a fully bootloader and Sim unlocked phone. Or if you're not interested in unlocking the bootloader you can skip the last part. You'll still have an unlocked phone.
jestyr8 said:
Actually you can follow this guide ( https://forum.xda-developers.com/oneplus-6t/how-to/guide-sim-unlock-t-mobile-version-type-t3915269 ) to remove the Sim lock. In essence you'll convert it to international, erase the two modem files containing the Sim lock info, revert it back to the TMO version. Apply to OnePlus for your unlock token, wait a week to get it, then unlock bootloader. End result is a fully bootloader and Sim unlocked phone. Or if you're not interested in unlocking the bootloader you can skip the last part. You'll still have an unlocked phone.
Click to expand...
Click to collapse
Hey I actually successfully followed this guide last night and am now typing on my 1+6t international w/ unlocked bootloader + sim unlock. I unlocked the bootloader using a different guide. One question: will updating my phone affect this sim unlock? Because I know you need 9.0.11 to unlock the bootloader, and you need an unlocked bootloader to use this sim unlock guide. I know there is an update available, Is it safe to update?
TrippyAzN said:
Hey I actually successfully followed this guide last night and am now typing on my 1+6t international w/ unlocked bootloader + sim unlock. I unlocked the bootloader using a different guide. One question: will updating my phone affect this sim unlock? Because I know you need 9.0.11 to unlock the bootloader, and you need an unlocked bootloader to use this sim unlock guide. I know there is an update available, Is it safe to update?
Click to expand...
Click to collapse
The Sim unlock sticks permanently, I've updated several times after doing the SIM unlock both on the TMO version and the international version and have had no issues at all. I flipped back and forth between the two trying to decide which I wanted to run. Stuck with the international just for the more consistent updates.
jestyr8 said:
The Sim unlock sticks permanently, I've updated several times after doing the SIM unlock both on the TMO version and the international version and have had no issues at all. I flipped back and forth between the two trying to decide which I wanted to run. Stuck with the international just for the more consistent updates.
Click to expand...
Click to collapse
Thanks for the info brotha!
Hi. I recently bought the LG V35 supposedly unlocked; however, I am unable to activate on T-Mobile.
Backstory: After purchasing the V35, I followed the instructions on cross flashing to get rid of the AT&T bloat here https://forum.xda-developers.com/lg-v35/development/bootloader-unlock-root-instruction-t4052145. The firmware I downloaded was from https://lg-firmwares.com/lg-lmv350ulm-firmwares/; however, the AIO and the USA versions are both the same. I flashed one of the firmware and all is fine, except now I get "Network locked" after I insert my SIM card from T-Mobile. I went AT&T's site https://www.att.com/deviceunlock/#/https://www.att.com/deviceunlock/#/ for an unlock code; however, I do not get a prompt on my phone to enter the code. This is after I flashed the phone.
My questions are, which version of the firmware was I to use so my phone is network unlocked AIO or USA? If they are both the same, how do I get the phone to be network unlocked so I can activate the V35 to T-Mobile.
TIA
boricua65 said:
Hi. I recently bought the LG V35 supposedly unlocked; however, I am unable to activate on T-Mobile.
Backstory: After purchasing the V35, I followed the instructions on cross flashing to get rid of the AT&T bloat here https://forum.xda-developers.com/lg-v35/development/bootloader-unlock-root-instruction-t4052145. The firmware I downloaded was from https://lg-firmwares.com/lg-lmv350ulm-firmwares/; however, the AIO and the USA versions are both the same. I flashed one of the firmware and all is fine, except now I get "Network locked" after I insert my SIM card from T-Mobile. I went AT&T's site https://www.att.com/deviceunlock/#/[url]https://www.att.com/deviceunlock/#/[/url] for an unlock code; however, I do not get a prompt on my phone to enter the code. This is after I flashed the phone.
My questions are, which version of the firmware was I to use so my phone is network unlocked AIO or USA? If they are both the same, how do I get the phone to be network unlocked so I can activate the V35 to T-Mobile.
TIA
Click to expand...
Click to collapse
You need to be on AT&T firmware to use the carrier unlock code. If you cross flash to different firmware before carrier unlocking you are out of luck. EDIT: see posts below where new information has emerged.
Obviously your V35 was not carrier unlocked/SIM card unlocked, in spite of what the seller said?
Unlike with the LG V30 series, flashing carrier unlocked firmware does NOT carrier unlock AT&T LG V35. You need to use carrier unlock code prior to cross flashing different variant firmware.
Perhaps you can contact someone with Octoplus box and get back to AT&T firmware to use carrier unlock code. AT&T doesn't publicly release KDZ for their firmware, but some dealers with Medusa and Octoplus boxes still somehow have it.
boricua65 said:
Hi. I recently bought the LG V35 supposedly unlocked; however, I am unable to activate on T-Mobile.
Backstory: After purchasing the V35, I followed the instructions on cross flashing to get rid of the AT&T bloat here https://forum.xda-developers.com/lg-v35/development/bootloader-unlock-root-instruction-t4052145. The firmware I downloaded was from https://lg-firmwares.com/lg-lmv350ulm-firmwares/; however, the AIO and the USA versions are both the same. I flashed one of the firmware and all is fine, except now I get "Network locked" after I insert my SIM card from T-Mobile. I went AT&T's site https://www.att.com/deviceunlock/#/https://www.att.com/deviceunlock/#/ for an unlock code; however, I do not get a prompt on my phone to enter the code. This is after I flashed the phone.
My questions are, which version of the firmware was I to use so my phone is network unlocked AIO or USA? If they are both the same, how do I get the phone to be network unlocked so I can activate the V35 to T-Mobile.
TIA
Click to expand...
Click to collapse
My understanding is that if you flash the firmware for south america, when you boot it with your sim card, a pop up will appear asking for an unlock code. Haven't done it myself but it sounds like in your situation it wouldn't hurt to try...
Of course, if u don't get a pop up, try the code that supposedly brings up pop up to enter code.
follow this link for the MIA version that should work.
cheers, let us know if you try it the results.
Thread Cleaned and it will end here regarding this back and forth, take care.
Hi OP, use LGUP to flash Mexican region kdz, insert your T-Mobile sim and unlock window will pop-up upon reboot and you can use the unlock code to unlock your phone. Good luck.
Android# said:
Hi OP, use LGUP to flash Mexican region kdz, insert your T-Mobile sim and unlock window will pop-up upon reboot and you can use the unlock code to unlock your phone. Good luck.
Click to expand...
Click to collapse
Is this guaranteed to work? I really want to use this phone.
boricua65 said:
Is this guaranteed to work? I really want to use this phone.
Click to expand...
Click to collapse
Guaranteed? Well, as stated by those mentioning it here, I don't think we've actually done it, only repeating that others say it will work. So again, guaranteed? I couldn't guarantee it, but it seems unlikely that people would say it does work, and be lying about it?
Here's a GDrive link to the kdz you'd want to flash to try it. It's the latest Oreo for the south american region. Aside from using LGUP to flash it, you'd need an unlock code.
The md5 sum from this LG Page should match, to verify legitimacy.
Let us know if it works.
AsItLies said:
Guaranteed? Well, as stated by those mentioning it here, I don't think we've actually done it, only repeating that others say it will work. So again, guaranteed? I couldn't guarantee it, but it seems unlikely that people would say it does work, and be lying about it?
Here's a GDrive link to the kdz you'd want to flash to try it. It's the latest Oreo for the south american region. Aside from using LGUP to flash it, you'd need an unlock code.
The md5 sum from this LG Page should match, to verify legitimacy.
Let us know if it works.
Click to expand...
Click to collapse
So I just flashed my phone from the link you provided and no dice. I reflashed, factory reset, insert the SIM card after completing set up, insert SIM card after factory reset the second time, etc. with no luck. I am not getting a pop to ask for the unlock code.
EDIT to add: So I found a set of instructions when I don't get a pop up asking for the network unlock code (below)
Second option (device doesn't ask for an unlock code with an unaccepted SIM)
1. Start the device with an accepted simcard (example LG V35 ThinQ was bought in Orange you need to insert an Orange card)
2. Go to the dial screen and press “2945#*model number#” (the same way you enter a phone number)
Example: the device is a P999 you need to enter “2945#*999#” or for KU990 you need to enter “2945#*990#” etc…
So far I am getting closer. Now I get a message saying SIM not provisioned. I will continue to research and troubleshoot. If I continue to run into a another roadblock, I will post here. Thank you all.
Okay, now I fracked up something else. I went from V350EM10h_OPEN_SCA_OP_118.kdz to V350ULM20f_00_NAO_US_
Okay now I am stuck at the LG Life's Good splash screen. I went back to LGUP and did not see it was defaulted to Refurbish going from V350EM10h_00_OPEN_SCA_OP_0118.kdz to V350ULM20f_00_NAO_US_OP_0218.kdz. I went back and reran LGUP with Upgrade chosen; however, the phone is still stuck at the splash screen. Help!
EDITED
boricua65 said:
Okay now I am stuck at the LG Life's Good splash screen. I went back to LGUP and did not see it was defaulted to Refurbish going from V350EM10h_00_OPEN_SCA_OP_0118.kdz to V350ULM20f_00_NAO_US_OP_0218.kdz. I went back and reran LGUP with Upgrade chosen; however, the phone is still stuck at the splash screen. Help!
Click to expand...
Click to collapse
So you've tired to reflash ulm and have an issue there. But did you get it sim unlocked?
here's also some instructions I found re unlocking sim if you don't get a pop-up
UNLOCK LG UNLOCK INSTRUCTIONS
ONCE YOU HAVE RECEIVED THE UNLOCK CODE EMAIL, PLEASE FOLLOW THE FOLLOWING INSTRUCTIONS CAREFULLY.
1) Insert a SIM card that is not from the original carrier in your phone and power on the phone.
2) Once finished loading your phone will ask you for the "SIM Network Unlock PIN".
If your phone does not prompt for a code, please dial 2945#* [model number] # to bring up the prompt
For example LG G4 D851: Dial 2945#*851#
3) Enter the LG Network Unlock Code.
If your phone asks for the "SIM network unlock PIN", use the NCK code.
If your phone asks for the "SIM Service Provider unlock PIN", use the SPCK code.
---------------------
But now you have an additional issue, you say you used 'refurbish' mode for both flashings? To the S.A. one and then back to the ulm one?
To my understanding, that should have worked. But whatever the case may have been, you're stuck now, from what I understand. If that's the case, all I can suggest is trying 'DL' mode for the ULM and select all partitions, OR maybe try 'Upgrade' (if you did refurbish" or refurbish if you did the other.
Sorry to hear you're having trouble, I guess, if you followed the procedure and it didn't work, then this is an indication there IS NOT a way to unlock the sim if you failed to do it on ATT OS.
Let us know if you're able to make any progress / got it sim unlocked or not. We'll have to start relaying the results so others don't have the same issue.
AsItLies said:
So you've tired to reflash ulm and have an issue there. But did you get it sim unlocked?
here's also some instructions I found re unlocking sim if you don't get a pop-up
UNLOCK LG UNLOCK INSTRUCTIONS
ONCE YOU HAVE RECEIVED THE UNLOCK CODE EMAIL, PLEASE FOLLOW THE FOLLOWING INSTRUCTIONS CAREFULLY.
1) Insert a SIM card that is not from the original carrier in your phone and power on the phone.
2) Once finished loading your phone will ask you for the "SIM Network Unlock PIN".
If your phone does not prompt for a code, please dial 2945#* [model number] # to bring up the prompt
For example LG G4 D851: Dial 2945#*851#
3) Enter the LG Network Unlock Code.
If your phone asks for the "SIM network unlock PIN", use the NCK code.
If your phone asks for the "SIM Service Provider unlock PIN", use the SPCK code.
---------------------
But now you have an additional issue, you say you used 'refurbish' mode for both flashings? To the S.A. one and then back to the ulm one?
To my understanding, that should have worked. But whatever the case may have been, you're stuck now, from what I understand. If that's the case, all I can suggest is trying 'DL' mode for the ULM and select all partitions, OR maybe try 'Upgrade' (if you did refurbish" or refurbish if you did the other.
Sorry to hear you're having trouble, I guess, if you followed the procedure and it didn't work, then this is an indication there IS NOT a way to unlock the sim if you failed to do it on ATT OS.
Let us know if you're able to make any progress / got it sim unlocked or not. We'll have to start relaying the results so others don't have the same issue.
Click to expand...
Click to collapse
Actually, I was able to get the phone to be network unlocked. I mistakenly went from S.A. version to NAO as Refurbished instead of Upgrade on the LGUP.
boricua65 said:
Actually, I was able to get the phone to be network unlocked. I mistakenly went from S.A. version to NAO as Refurbished instead of Upgrade on the LGUP.
Click to expand...
Click to collapse
So you're all set now? sim unlocked and back on ULM? If that's so, that's good news.
AsItLies said:
So you're all set now? sim unlocked and back on ULM? If that's so, that's good news.
Click to expand...
Click to collapse
Only the phone is network unlocked. It's still stuck at the LG logo screen and does not boot up.
boricua65 said:
Only the phone is network unlocked. It's still stuck at the LG logo screen and does not boot up.
Click to expand...
Click to collapse
Well that's not good. I can only suggest try doing a partition D/L? I don't know if that would help or not, but not sure it could be worse than it is now? Certainly don't try the other options like chip erase etc. Those are not for a situation like this, they will certainly make things worse!
boricua65 said:
Hi. I recently bought the LG V35 supposedly unlocked; however, I am unable to activate on T-Mobile.
Backstory: After purchasing the V35, I followed the instructions on cross flashing to get rid of the AT&T bloat here https://forum.xda-developers.com/lg-v35/development/bootloader-unlock-root-instruction-t4052145. The firmware I downloaded was from https://lg-firmwares.com/lg-lmv350ulm-firmwares/; however, the AIO and the USA versions are both the same. I flashed one of the firmware and all is fine, except now I get "Network locked" after I insert my SIM card from T-Mobile. I went AT&T's site https://www.att.com/deviceunlock/#/https://www.att.com/deviceunlock/#/ for an unlock code; however, I do not get a prompt on my phone to enter the code. This is after I flashed the phone.
My questions are, which version of the firmware was I to use so my phone is network unlocked AIO or USA? If they are both the same, how do I get the phone to be network unlocked so I can activate the V35 to T-Mobile.
TIA
Click to expand...
Click to collapse
Sorry to tell you this but you can't network unlock after flashing. You should have researched that if you're modifying the phone
Vuzeultra said:
Sorry to tell you this but you can't network unlock after flashing. You should have researched that if you're modifying the phone
Click to expand...
Click to collapse
You did not ready the whole thread. I was able to network unlock my device after using a South American firmware. In my haste, I used LGUP and flashed the NAO firmware as a Refurbish instead as Upgrade.
AsItLies said:
Well that's not good. I can only suggest try doing a partition D/L? I don't know if that would help or not, but not sure it could be worse than it is now? Certainly don't try the other options like chip erase etc. Those are not for a situation like this, they will certainly make things worse!
Click to expand...
Click to collapse
With much trepidation, I did the Partition D/L and it work!!! :good::good::good: I got my phone back.
boricua65 said:
With much trepidation, I did the Partition D/L and it work!!! :good::good::good: I got my phone back.
Click to expand...
Click to collapse
Awesome, good job.