Related
This fix might sound crazy but it works
i have 2 evo's version 002 both with pretty bad light leakage under the buttons. One has 3 buttons and the second 2. In the dark they are very visible and i was getting annoying ready to return both. I tried the blowdryer trick but that did not work.
This is what i did about a week a ago, it only takes a minute.
Go get one of this which you might have laying around your house.
http://www.oppictures.com/singleimages/400/SAN82001_1_1.JPG
Go to a dark area where you are able to see the leakage and start painting let line between the plastic and leakage. try pushing down the plastic to and using the pen to paint some of of the inner cover. Get a towel and remove the ink that got into the screen and bottom cover.
After doing this my phone have not shown any leakage. i have tried water in a towel to see if it would remove the ink and show light leakage but no leakage what so ever (do not try alcohol). This fix is invisible to the naked eyes, i have 4 friends with evo's and they could not tell what i did, even after telling them they still did not know where was painted
This is an easy cheap fix, it takes about 2 minutes and anyone (and i mean anyone) can do it.
So please if it make you feel better returning bu
eduardmc said:
This fix might sound crazy but it works?
Click to expand...
Click to collapse
Are you asking us? i dunno, did you try it?
i dunno....seems ghetto, seems htc should have used done better r&d.
Hmm, I'd just like a $200 phone to work in the first place, not start falling apart 7 days in. :|
skoobz said:
Are you asking us? i dunno, did you try it?
Click to expand...
Click to collapse
sorry, i fixed it. English is not my native language so i do make alot of mistake in my writings.
Hrshycro said:
Hmm, I'd just like a $200 phone to work in the first place, not start falling apart 7 days in. :|
Click to expand...
Click to collapse
I don't believe i have had a phone that did not have any kind of problems related to software and hardware. The palm pre was a mess every new one i got had dead pixels, after 6 unit i finally got one that had 2 dead pixels. My diamonds phone use to get boiling hot. i could go on. all my friends iphones had drop calls like 20 calls a days (most switch to evo with me).
now the evil have a few problems, like the back cover not been flush and that was solved with a peace of small paper on top of the battery.
You will fine defect, nothing is perfect.
Interesting fix but it doesn't eliminate the fact the leak is happening because the screen is separating. Pushing the screen down will eliminate the leaking. The best fix will be to make sure the screen is sitting all the way down. So far I've only seen one guy do it on androidforums by pushing the screen down with clamps and heating it with a hair dryer. After letting it sit over night he didn't have any more leaking or lifting after two days. We have yet to hear from him on the progress (I think he ended up exchanging it anyway). Another guy said he tried the same fix and ended up making his phone worse.
thanks this is a nice cosmetic band aid If i don't see it, it doesn't bother me as much
coolguy949 said:
Interesting fix but it doesn't eliminate the fact the leak is happening because the screen is separating. Pushing the screen down will eliminate the leaking. The best fix will be to make sure the screen is sitting all the way down. So far I've only seen one guy do it on androidforums by pushing the screen down with clamps and heating it with a hair dryer. After letting it sit over night he didn't have any more leaking or lifting after two days. We have yet to hear from him on the progress (I think he ended up exchanging it anyway). Another guy said he tried the same fix and ended up making his phone worse.
Click to expand...
Click to collapse
yeah but it seems the screen separation on happens the first few days of using the device and the progress stop. my device did not progress after i notice the leakage and was looking for a fix. This kind of fix the problem since you won't see the light leakage at all. The screen separation is wasn't really a problem since i only notice it when the light leakage is visible.
Again the point is missed. This does not prevent the fact that in time the leakage will evolve into screen separating from the base. The light is leaking because the adhesive used during rush manufacturing wad improperly sealed around the face of the device. This was a huge problem for the iphone (didn't think it would happen to me but here I am with my evo)
This worked like a charm I've already exchanged my EVO twice (on my 3rd evo). The first two had dead pixels, and all three have had the light leak. I'm not in the mood to go through the RMA process with HTC, so this fix was a perfect solution for me. I tried a similar fix using superglue on one of the other EVOs I had, but it left an unsightly white residue in the crack of the screen.
While this may not be a permanent solution to the problem with the screen coming unglued, I'm ecstatic that I no longer have to see light coming from the bottom of my screen.
Thanks a lot.
This thread. ... with that Expo 2 ... funny.
I found my own fix after trying several different things including tightening the torx screws, using a hair driver and clamps, and an expo dry erase marker. I read a post about using plastidip which I had, but unfortunately it was dried out. I then decided to use something else I had around. A fine tip black paint maker (Decocolor - LINK). I dabbed the tip on a piece of paper several times to get a little paint on the tip. I then carefully ran it across the edge where the light was leaking which allowed a very small amount of it to drip down in the crevice. I then ran a q-tip and a paper towel along the edge to make sure any that got outside of the crevice was removed. Now I have no light leakage. The paint is permanent, waterproof (not that I will be testing that) and will be easy to reapply if I ever need to. It also takes very little skill and the markers can be found at a local Michaels or arts/crafts store.
On a side note, the hairdryer/clamp method did help a little, but this paint maker did the job the rest of the way.
Please, please, stop all these new threads about problem after problem.
My phone has the bent glass curve at the top but not the bottom, I have a screen with a major blue tint, it has about 4 or 5 little bands running across it, and the home button even freezes from time to time.
I'm not stressing. None of these issues really hinder me from using my phone. AND if they did, I wouldn't make a 2nd or 3rd thread about the issue when using the search button would bring up numerous results. Hell, when you create a new post now, XDA is nice enough to auto search for you.
/rant
Im here with ya....I returned it 4 times but im sticking with this one!
After all that trouble I will not go to a different phone =D
I'm feeling a little left out. Is my Mexico the only one without a fault?
Sent from my Nexus S using XDA App
[email protected] Mexico.... auto correction pwnage
Read nexi
Sent from my Nexus S using XDA App
No problems here, I think the glass is supposed to "bend" at the top, it is concave after all.
mine is like a Boat!
sort of like a flat banana
it does seems to have been designed that way, else i'll imagine the glass to be flat, instead of concave
the case plastic shell of the phone is concave shape as well
I found a simple solution to fixing a digitizer that's starting to go bad, after having replaced the digitizer on my phone TWICE. The first digitizer started having the typical symptoms, where about a 1cm bar about a third of the way down the screen just wouldn't register touches. And if it did, it normally ended up with spontaneous, erratic behavior. I ordered a replacement, which turned out to be worse than the original digitizer. Sent that one back, got another digitizer, and it worked great for about a month. Then I started having same issues all over again. (And if anybody here has replaced a digitizer on this phone already, you probably understand how painful it can be.)
So, for those of you who haven't ordered a replacement yet, and are having the issues I've described above, try this test first. When you start experiencing erratic behavior and dead spots, squeeze the upper portion of the phone, where the camera, speaker, and Motorola logo is, moving in left to right. Don't be afraid to use a good amount of pressure, but don't squeeze to where you might crack something. If the problem disappears, the thin cable underneath that area is starting to separate away from the connections. (Don't know the correct terminology here.) Now, I'm not sure if it's just glue or really thin amount of solder holding these connections together, but I do know that they break pretty easily. I ended up using a heat gun, and heating up the upper portion of the phone till it was a little too hot to touch (be careful, though, too hot, and you might cause some damage to the LCD screen.) and used a rag and squeezed from the center, moving outwards, maintaining as much constant pressure as I could, till the phone was about normal temperature.
It's been roughly an hour since I've tried this, and I haven't had any issues thus far, except for a couple hiccups. I may end up doubling up on the double sided tape on the bottom, to create more of an incline to prevent the ribbon from further separating. But this may help squeeze some more life out of the digitizer. Hopefully this helps a few of you!
Well, turns out the fix really didn't work. Still trying to figure out what causes the digitizers to go bad. I have noticed, though, that squeezing the upper left corner (where the camera is) gets rid of the problem, but it reappears usually a few moments later.
Fingerprint scanner
Sent from my MB860 using XDA Premium App
Awesome. I wish I had known that, I would've disconnected that shiz. Appreciate the response though.
stevendeb25 said:
Fingerprint scanner
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
How do you know its the FP scanner?
Sent from my MB860 using XDA
djluis48 said:
How do you know its the FP scanner?
Sent from my MB860 using XDA
Click to expand...
Click to collapse
i dont for defo, but thats the area that i posted about, http://forum.xda-developers.com/showthread.php?t=1719653
you use that piece thin of metal, to push against the fingerprint area, then screen display is good
working for me over a week now.
I got caught in the same problem,i have read a thread about how to fix this problem the other day (which is to insert a small stuff between the battery and fingerprint scanner)
then i tried to pull the scanner upwards a little,then it seems working!
but this issue comes back after i placed the back cover
finally i found that my problem would disappear once the back cover taken out!and appear once covered!
I think the problems starts when you push a lot of times the finger print to wake up the phone.
Sent from my MB860 using XDA
I just wanted to report on a possible fix to touchscreen issues. While this may, or may not, work for you, it is what I did, what I have done on three(3) total devices & it is what has eliminated touch screen issues for myself & two other individuals.
This is a work in progress & I will be adding pictures & more detailed instructions, along with progress updates as I use the device going forward. This modification (though it really isn't a mod) requires no tools & while it does entail some light dis-assembly, it did NOT require breaking any seals that would void the warranty outright. Doing this however, may very well void your warranty, I am not an attorney, I am an engineer & taking things apart is what I have been doing since before I could even crawl nearly forty years ago.
To begin, I will go into my Nexus 7 story, which may allow you to identify similar symptoms.
My Nexus 7 device worked well out of the box, with only occasional multi-touch issues. As time progressed, the issues got worse & at one point a couple of weeks ago, even single touch event started to lag or not register. My Nexus 7 is a batch from July of 2013 & I purchased it in August of 2013, so it was still under warranty. Asus issued me an RMA number, however, I hate broken things, knowing darn well that 99% of the time I can fix them myself far faster than the total time it would take an OEM to get my device back to me. At any rate, after the 4.4 update, my touch issues got even worse. Aside from missing even simple gestures & taps, occasionally the screen would look funny & once it even had a sttatic "snowy" screen that was remedied by a factory reset.
After reading a few complaints from people about screen separation & investigating the device via the ifixit tear down, I decided I would take a look before committing to the RMA process. I gently slid my thumbnail under the bezel & slowly worked it around. Immediately I could feel the clips giving way & I eventually had the back cover off. Once the back cover is off, you will notice that the screen & digitizer ribbon cable runs across the battery, pinned in between the battery tray & the inductive Qi coil on the back cover of the device. I found it is easier to ease all the sides up slightly, then remove the back by gently lifing from the sides & upper portion, with the bottom, where the USB port is, being lifted up last. Once I removed the cover, I disconnected the battery terminal clip. After disconnecting the battery, I then followed the screen ribbon cable to where it is clipped into the screens board contacts with a plastic stay. Immediately upon applying pressure to the cable ribbon stay I felt & heard a faintly audible "click" sound. On closer inspection, I discovered that poor contact was being made by the ribbon cable & furthermore, the flex in the battery tray over time, when coupled with the heat generated at that location (due to the battery & the inductive Qi coil) can slowly loosen the ribbon cable stay & affect the quality of the connection. I used a thin piece of composite material to reinforce the cable ribbon stay & used a piece of vinyl along with a non-conductive adhesive to better secure the cable ribbon & stay. I only used a tiny amount so as not to affect the ability to safely disconnect the ribbon cable without destroying it. I also did not want a bunch of adhesive heating up & spreading to other areas. Before I performed the following step, I decided to test out a few thoughts. What I discovered is detailed in the next paragraph. So, after letting the adhesive dry overnight, I reattached the battery terminal clip & started the device. It has worked flawlessly since, without any touch issues.
While I had the back cover off, I carefully reattached the battery terminal clip & while wearing Nitrile gloves & standing on a wood floor to minimize the risk of static discharge, I would turn the device on with the display ribbon cable in various states of connection. They ranged from being angled so that the far contacts would make little or limited connection, to a full connection with varying degrees of pressure applied, to simulate a good or bad connection. Sometimes the device would not boot. Other times it would boot & have a static or "snowy" screen. Sometimes it affected all touch, from single finger events to multi-touch. It also surprisingly affected the system response. Things would freeze up & apps would FC or ANR. Again, once I improved the connection, everything was back to normal & functioning perfectly. In fact, it is functioning better than it did out of the box.
While I am sure Asus would argue that this voids the warranty, I did not break any seals. No tools were needed, just the materials I chose to use & had lying around. As I also mentioned in the opening, I did this on another household members device, that only had multi-touch issues, not all the issues I had, & their device has now been functioning wonderfully for the last several days. The display ribbon clip in their device was not completely detached on one side like mine, but it was fairly loose all the same. The third device was a friends & it was having mostly single touch issues, though he said multi-touch issues would come & go. We ran through the steps on Hangouts & his ribbon cable was in its place, but as he removed the back, the stay clip fell out. His device is also functioning normally now & he has not reported any further touch screen issues.
Since the problems people are having are oftentimes different & not consistent, it very well could be that this is exactly the issue. I would surmise that it could be the very reason why Google & Asus have been VERY, VERY quiet about the issue, since it would require returning the device for a fix, not simply a software fix.
If you try this, I urge you to be patient & use the utmost care when removing the back. While there are no cable attached to the back, you never want to force things. Be gentle & when you find the right spot for lifting, you will know it. It is not difficult & it is relatively harmless. I would caution you to use gloves & minimize the risk of discharging static electricity. I also recommend using gloves because copper sheeting is used in a couple spots & if you have ever worked with copper sheeting in electronics, you know that stuff grabs oils from your skin like crazy & you will end up leaving evidence in the form of an ultra-clear fingerprint that almost no solvent will remove. (Don't use solvents in your device unless you are a daredevil or know what you are doing).
So, that is my story & what worked for me & my small group. Ultimately, these devices are ours & it is up to each of us individually to pursue the fixes or mods that suit us best. That also means that the responsibility & consequences belong to each of us as individuals. What steps you are willing take to remedy any issues you may have with your device are decisions you need to weigh. This is XDA, where people take risks, assume that the are eventually going to brick their devices & make real modifications to devices (which this really is not). If you break something because you needed every single little detail & step spelled out for you, that's not my problem. Again, this is XDA, not some ragtime blog & anything you do here usually requires you to be able to think for yourself at some point.
Lastly, I will try to get to a step by step with pictures as soon as I can. I am not a developer, I am not a student & I don't have a ton of time to devote to answering questions. I will do what I can, when I can, but between the holidays & my job as a mechanical engineer (two large hospital projects are going on right now that take up 95% of my day), I have very little time right now. This post is the result of a large lunch review meeting, not free time, so it will probably take some time to get everything up. I have to recreate most of it, since I really figured on RMA'ing my device. I never expected this to work as it has for me.
Thanks.
Thanks for the post! If I know the issue I don't mind taking it apart to fix it.
I RMA'd it once as I didn't feel I should have to fix it, but it was such a pain jumping through all the hoops only to get it back with docs stating "OS reset" and finding the problem 30secs after resetting up my account.
I have another RMA but have waited shipping it for an update to KitKat in the hopes that it would help. It hasn't. I'll have to see if I feel up to trying your fix.
Thanks!
Sent from my Nexus 7 using xda app-developers app
No one else tried this?
I barely have screen issues, but I am curious to know if this works, after replacing my N7 2013.
Thanks and regards,
Video tuto
Need a video tutorial. I have both touch and multi reboot issue. sometimes there are 2-4 reboots occur during rebooting of system. problems persist even after kitkat update. I think this is the cause that causing me such multireboot issue.
Hope this will solve my problem. i am out of USA country so i cant give for a RMA. But need a solution look like that.
Thanks gsleon3. It always sounded like a hardware bad connection type of issue so I'm not surprised.
The problem with rma is that I'm not sure their repair techs would really fix anything. The cause may not have been made known even to their own techs because it would leak out and might start a class action law suit. My 2012 nexus 7 never had any of the touch issues my 2013 version is showing. Quality control has slipped with the 2013 version.
Any lawyers here?
Video might be tough, but I'll try to get to it. I will try to dedicate some time this weekend. I was thinking Saturday night, but I just learned that the Day of the Doctor is being simulcast in 3D near my house. So it may have to wait till Sunday so I can let my inner geek out.
Sent from my Nexus 7 using XDA Premium HD app
GSLEON3 said:
Video might be tough, but I'll try to get to it. I will try to dedicate some time this weekend. I was thinking Saturday night, but I just learned that the Day of the Doctor is being simulcast in 3D near my house. So it may have to wait till Sunday so I can let my inner geek out.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
After what you shared with us, please DO enjoy your 3D simulcast of THE Doctor. We will be patienly waiting for your video.
Regards!!
nearly an inch long strip at the top of my screen stopped responding to touch i sent it back only had it for 6 days..
Tried this out. My clips were seated properly but I can see the reasons why they pop out.
Took about 5 mins from start to finish to test. Good job.
OP, during your disassembly of the device did you notice any random internal parts that could possibly be applying pressure to the screen from behind it? I ask because my otherwise perfect nexus 7 got a random blue dot in the middle of the screen and I know from past experience that that's typically the result of pressure physically warping the lcd panel.. otherwise the only other thing I can think of is that the lcd is being permanently damaged by the on/off case magnet but that's unlikely. or maybe heat that's causing the battery to flex into the screen. It's extra frustrating because I've had the nexus in a loose fitting hard case and the hard front flap should prevent the kind of pressure damage that would cause those blue marks... sigh.
ibebyi said:
OP, during your disassembly of the device did you notice any random internal parts that could possibly be applying pressure to the screen from behind it? I ask because my otherwise perfect nexus 7 got a random blue dot in the middle of the screen and I know from past experience that that's typically the result of pressure physically warping the lcd panel.. otherwise the only other thing I can think of is that the lcd is being permanently damaged by the on/off case magnet but that's unlikely. or maybe heat that's causing the battery to flex into the screen. It's extra frustrating because I've had the nexus in a loose fitting hard case and the hard front flap should prevent the kind of pressure damage that would cause those blue marks... sigh.
Click to expand...
Click to collapse
Well if it is pressure, I've found on past devices, sometimes batteries start expanding over time, like they have a fat belly.
Touchscreen possible fix
Started reading a bit on Google Products Forum and found a guy who said that the touchscreen problem can't be fixed by software.
So he took the back of the tablet off and found that the problem lies on the screen digitizer cable not being clipped to the connection port correctly. He disconnected the cable and connected it back again, and now his touchscreen is working perfectly.
I do not want to try it because I don't want to risk anything, but can anyone brave enough try this?:fingers-crossed:
Here's the guy's profile: http://productforums.google.com/for...ioWy9HdPwsowoDCuOz8SS9uR9nzVnPi6g2kSAInwwCj94 (it's the post form Nov 19)
LittleConfucy said:
Started reading a bit on Google Products Forum and found a guy who said that the touchscreen problem can't be fixed by software.
So he took the back of the tablet off and found that the problem lies on the screen digitizer cable not being clipped to the connection port correctly. He disconnected the cable and connected it back again, and now his touchscreen is working perfectly.
I do not want to try it because I don't want to risk anything, but can anyone brave enough try this?:fingers-crossed:
Here's the guy's profile: http://productforums.google.com/for...ioWy9HdPwsowoDCuOz8SS9uR9nzVnPi6g2kSAInwwCj94 (it's the post form Nov 19)
Click to expand...
Click to collapse
The author of that post is the op of this thread.
sfhub said:
The author of that post is the op of this thread.
Click to expand...
Click to collapse
Whoops, sorry, didn't realize:silly:
ibebyi said:
OP, during your disassembly of the device did you notice any random internal parts that could possibly be applying pressure to the screen from behind it? I ask because my otherwise perfect nexus 7 got a random blue dot in the middle of the screen and I know from past experience that that's typically the result of pressure physically warping the lcd panel.. otherwise the only other thing I can think of is that the lcd is being permanently damaged by the on/off case magnet but that's unlikely. or maybe heat that's causing the battery to flex into the screen. It's extra frustrating because I've had the nexus in a loose fitting hard case and the hard front flap should prevent the kind of pressure damage that would cause those blue marks... sigh.
Click to expand...
Click to collapse
Ive disassembled the device too and it has nothing specials with exception that few flex cables located right unddr the cover. Not sure if one of them is belongs to touchscreen though
Also i got this blue dot too,and one pink as well. In middle of screen.
Tim4 said:
Ive disassembled the device too and it has nothing specials with exception that few flex cables located right unddr the cover. Not sure if one of them is belongs to touchscreen though
Also i got this blue dot too,and one pink as well. In middle of screen.
Click to expand...
Click to collapse
I got a blue smear too, but near the edge of the panel but since it's not very visible..I'm just gonna ignore it..
GSLEON3 said:
Video might be tough, but I'll try to get to it. I will try to dedicate some time this weekend. I was thinking Saturday night, but I just learned that the Day of the Doctor is being simulcast in 3D near my house. So it may have to wait till Sunday so I can let my inner geek out.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Absolutely no problem, GSLEON3, with profound gratitude I assure you that we really appreciate your engineering work discovering the problem. Take your time and we will patiently wait until you have the time to prepare a more complete review.
Wow! If it is so easy, I don't understand what the Asus support makes everyday.
Thanks for sharing it.
Sound really greate and promising. If you could, a tutorial video would be perfect for us, please
sfhub said:
Well if it is pressure, I've found on past devices, sometimes batteries start expanding over time, like they have a fat belly.
Click to expand...
Click to collapse
If higher amperage is used there is an increased risk of expansion due to the higher excitation in the Li atoms. You will increase the wear of it too.
So if possible always use lower amperages to charge batteries(preferably around 500mA), you can limit the charging IC using a lower output charger or your computer's USB port.
Here I have a 100% fix for the galaxy note 4 emmc error and random reboots,
Including unable to unlock phone, deep sleep issues, and random behaviour.
Also fixes overheating and battery issues as well as makes GearVR work without heating issues.
This is a hardware fix and so far has been 100% effective on all devices I have repaired,
Its an easy repair and takes about 20 to 30 minutes to complete.
No special tools are needed and I have posted a video below to show how this is done.
All you will need is a bank card or spudger, a pair of scissors and some cardboard from a cereal box.
You may also need a drop of glue or blue tack.
Although this usually stops all issues on most devices you may still need wakelock but usually it's not needed.
Paypal donation welcome if it fixed your phone you could donate here https://paypal.me/Arnookie anything helps no matter how small.
https://www.youtube.com/watch?v=jLPHWtb0StI
Anyone attempting this please do not go under the glass try push it forward from the battery compartment and then run a card around the edges of the grey plastic. Just go carefully when doing this and don't rush. You can heat the screen with a hairdryer to make removing the phone from the casing easier. It's the best way to do it.
Also you could use Aluminium Thermal pads or Copper instead of cardboard for better thermal cooling. Just make sure its 0.5mm or 1.2mm thick but no thicker!
You will get great 3d mark results using Aluminium, Copper or Thermal pads. "Do not use any kind of thermal pastes!!", You have been warned! But even using just cardboard works great as well.
Don't blame me if you break your phone more by attempting this. But if your phone is not working, you really have nothing to loose.
If you have an old phone you would like to donate please send me a PM.
1. Thanks a lot mate, I can confirm that this method works. At least it helps to turn the phone on/off asap without removing the battery then waiting like before.
2. Also, I am glad to break the front glass, and also cut off the blue wire for phone signal, just by sliding my credit card when trying to open the parts. So now I am ordering the new glass and a set of wifi/phone signal wires.
I am not blaming you, LOL, just to add in some information that anyone who never open the Note 4 themselves would do an extra care on this work.
Well done for your tips!!!
I'm glad it worked for you. Sorry to hear your glass cracked. That's a pain. I do try to explain not to go under the glass when doing this. I'm sorry if it was not so clear. Anyone attempting this please do not go under the glass try push it forward from the battery compartment and then run a card around the edges of the grey plastic. Just go carefully when doing this and don't rush. You can heat the screen with a hairdryer to make removing the phone from the casing easier. It's the best way to do it. ?
Couldn't this cause a fire?
Sent from my Samsung SM-N910T using XDA Labs
No not really but if you like you could use aluminium or copper for better cooling and thermal performance. But it must be no thicker than 3 or 4 folds of cereal cardboard.
This has worked for many people already.
See the comments.
https://www.youtube.com/watch?v=jLPHWtb0StI
arnookie said:
Here I have a 100% fix for the galaxy note 4 emmc error and random reboots,
Including unable to unlock phone, deep sleep issues, and random behaviour.
Also fixes overheating and battery issues as well as makes gearvr work without heating issues.
This is a hardware fix and so far a has been 100% effective on all devices I have repaired,
Its an easy repair and takes about 20 to 30 minutes to complete.
No special tools are needed and I have posted a video below to show how this is done.
All you will need is a bank card or spudger, a pair of scissors and some cardboard from a cereal box.
You may also need a drop of glue or blue tack.
Although this usually stops all issues on most devices you may still need wakelock but usually it's not needed.
Paypal donation welcome if it fixed your phone you could donate here https://paypal.me/Arnookie anything helps no matter how small.
Anyone attempting this please do not go under the glass try push it forward from the battery compartment and then run a card around the edges of the grey plastic. Just go carefully when doing this and don't rush. You can heat the screen with a hairdryer to make removing the phone from the casing easier. It's the best way to do it.
Click to expand...
Click to collapse
We're you able to revamp the thread? Thanks.
Sent from my Samsung SM-N910T using XDA Labs
jerryspring said:
We're you able to revamp the thread? Thanks.
Sent from my Samsung SM-N910T using XDA Labs
Click to expand...
Click to collapse
Would be nice if it were pinned.
arnookie said:
Would be nice if it were pinned.
Click to expand...
Click to collapse
Huh?
Sent from my Samsung SM-N910T using XDA Labs
---------- Post added at 05:19 AM ---------- Previous post was at 05:18 AM ----------
arnookie said:
Would be nice if it were pinned.
Click to expand...
Click to collapse
I'm Chris n on your YouTube comments
Sent from my Samsung SM-N910T using XDA Labs
Instead of cardboard, I used folded aluminum to the desired thickness and reassembled. My note 4 actually turns on properly where prior the phone would shut off from minor use and had to remove the battery and pop it in the freezer just to turn on.... I did have 2-3 reboots so far but that was after heavy usage (few minutes gaming and gps usage).
I saw a similar youtube video that actually showed a voltage power supply and volt meter to the out put and pressure on the emmc card was the solution as well.
Thanks for the fix! Hope I can get more usage out of the old Note 4.
Yeh I actually upgraded this to aluminium as well. ?
worked
just worked for me....unfortunantly I somehow messed up the home button and the right touch key....guess I went too far in and messed up cable......not sure its worth taking screen off to repair the buttons...using navigation bar app instead.....can still access recovery or download via adb.......
Code:
kudzufarmer said:
just worked for me....unfortunantly I somehow messed up the home button and the right touch key....guess I went too far in and messed up cable......not sure its worth taking screen off to repair the buttons...using navigation bar app instead.....can still access recovery or download via adb.......
Click to expand...
Click to collapse
If you find the back button does not work properly its normally down to the screen not being pressed into the housing fully. Try squeeze the the screen into the casing more. It should sit flush.
arnookie said:
Code:
If you find the back button does not work properly its normally down to the screen not being pressed into the housing fully. Try squeeze the the screen into the casing more. It should sit flush.
Click to expand...
Click to collapse
An update...the home button works when hard pressed and the screen is flush with the case........the "springiness" for lack of a better term is not there...the left optical button still does not work. not sure whats its called, but the button that displays the multiscreen view of open apps is not working...... I typed wrong button in my first post.
kudzufarmer said:
An update...the home button works when hard pressed and the screen is flush with the case........the "springiness" for lack of a better term is not there...the left optical button still does not work. not sure whats its called, but the button that displays the multiscreen view of open apps is not working...... I typed wrong button in my first post.
Click to expand...
Click to collapse
You could always install a navigation bar button to get around it.
arnookie said:
You could always install a navigation bar button to get around it.
Click to expand...
Click to collapse
I am using a navigation bar app insted
i've messed something and now the front camera doesn't work anymore...it shows an "error to the server , please restart camera" message. i was carreful with the front camera and the band, what can it be the problem?
Thank you for sharing this. I'm going to use a 2mm thermal pad, do you think that will be sufficient?
EmulaMind said:
Thank you for sharing this. I'm going to use a 2mm thermal pad, do you think that will be sufficient?
Click to expand...
Click to collapse
Please try and let us know. Thanks.
EmulaMind said:
Thank you for sharing this. I'm going to use a 2mm thermal pad, do you think that will be sufficient?
Click to expand...
Click to collapse
Yeh sure but maybe do 0.5mm to 1.25mm, I would say 0.5mm minimum but 1.25mm should be ok. Its only purpose is to put pressure on the chip