rooted mobile dont start - Desire HD General

I dont really know where to start, or if this is fixable at all, but yesterday i tought id try to root my desire hd.actually I'm not knowledgeable in this, but i gave it a try, it looked easy. I used advanced ace hack kit for it. and i think everything went fine. then i downloaded rom manager from market, but it said i was not rooted, from there i think i started to mess everything, so i did the whole root thing again with the ace hack kit. but ended with same result. I think i then accidentally deleted eveytning on my sd card in my frustration and rebooted the phone, now it wanted me to install drivers for android 1.0 and qualcomm CDMA technologies MSM. and somehow the phone started in the new custom rom this time (cynomogen 7) i tought something must have gone wrong. so i decided to use the ace hack kit again, tought it maybe take me back to the start, but not this time. when i power up my phone it stays frozen with the htc logo, if i use the recovery mod, with the power,volume down button, with usb plugged in, it says that i need to install drivers for android 1.0 and qualcomm CDMA technologies. I dont know what to do, throw it in the garbage? and sorry for bad explanation, but thats all i got.
The only thing that works is to enter fastboot/recovery mode. i have tried factory reset in the setting there, but it dosent work. it there any way to flash a custum rom and clockworkmode from there with usb inplugged? any help at all?
PROBLEM SOLVED. how do i delete this post?

Can you flash a stock RUU?
Edit: just missed your 'solved' edit.
Can you explain what you did, there's another thread with apparently the same issue here: http://forum.xda-developers.com/showthread.php?t=1810058

h
mateusm said:
Can you flash a stock RUU?
Edit: just missed your 'solved' edit.
Can you explain what you did, there's another thread with apparently the same issue here: http://forum.xda-developers.com/showthread.php?t=1810058
Click to expand...
Click to collapse
this thread solved my problem back to the stock rom
http://forum.xda-developers.com/showthread.php?p=26844128#post26844128

Related

cant restore phone with ruu 1.29

it gets to writing signiture and says it cant update this rom. is there a newer ruu from sprint. it used to work till i got my replacement phone in.
I had same issue..
what I did was (and this only worked cuz I had this already done) Rooted the phone with RA 1.5.2 recovery and flashed Fresh 1.0
once I got it to successfully load into fresh.. then I ran the RUU 1.29 and it worked..
still cant get it to let me un root it. it says that it is the wrong rom to do it. is there a new ruu
Have you tried flashing while in quick boot?
sorry to be such a newb. but what is quick boot and how do i get to it
Power your phone off. Hold the volume down button and power it on. You will get a menu and one of the options is quick boot (I think it's volume up but I'm not positive).
With it hooked up to your computer, check device manager in windows and make sure you don't have any missing phone drivers. If you don't then run the RUU.
ok trying that now. and no errors with drivers
still doesnt work as soon as it gets to updating signature it stops. i dont get it. i have done it a million times with no problems. now it wont work
do you have "usb debugging" turn OFF?
I can confirm testing it with debugging off it still doesn't work. I've tried a million times as well, same problem. I'm not sure if we have to flash the stock rom image before doing so, but in flashrec it only gives me the option of backing up image before actually flashing one and I get an error "Backup Failed: Could not run command" not sure if that has anything to do with it
RUU 1.29 CDMA Sprint
Here's how I got it to work. I reflashed mine couple weeks ago with stock sprint rom (orginal factory state). You need to have HTC sync connected first. Once you establish connection than run RUU 1.29. The hero will drp connection than automatically re-install drivers than it will continue to load the original rom from sprint.
mulcahyd said:
Here's how I got it to work. I reflashed mine couple weeks ago with stock sprint rom (orginal factory state). You need to have HTC sync connected first. Once you establish connection than run RUU 1.29. The hero will drp connection than automatically re-install drivers than it will continue to load the original rom from sprint.
Click to expand...
Click to collapse
I was working with someone who was having an issue flashing the RUU (failing at checking license). I took him in to fastboot and we literally tried manually running the restore step by step. Basically what the RUU does but manually. And it would still fail at the license. It wasn't a driver issue.
But your fix will work for people whose RUU says it can't find the phone after it reboots it.
flipzmode said:
I was working with someone who was having an issue flashing the RUU (failing at checking license). I took him in to fastboot and we literally tried manually running the restore step by step. Basically what the RUU does but manually. And it would still fail at the license. It wasn't a driver issue.
But your fix will work for people whose RUU says it can't find the phone after it reboots it.
Click to expand...
Click to collapse
So how do we get it to work? I get the same error, unfortunately. I was thinking about trying your hero ruu update that you put out...
obannvi said:
So how do we get it to work? I get the same error, unfortunately. I was thinking about trying your hero ruu update that you put out...
Click to expand...
Click to collapse
The one on ppcgeeks? Heh I need to pull that. I used it earlier and found that after using it I had no access to the /data folder. Not huge deal if you are using it to take your phone back to Sprint or something, but no good if you are wanting to use it. I need to fix the script but am swamped right now.
What's your reason for wanting to RUU? Is your phone "with google" branded?
flipzmode said:
The one on ppcgeeks? Heh I need to pull that. I used it earlier and found that after using it I had no access to the /data folder. Not huge deal if you are using it to take your phone back to Sprint or something, but no good if you are wanting to use it. I need to fix the script but am swamped right now.
What's your reason for wanting to RUU? Is your phone "with google" branded?
Click to expand...
Click to collapse
I have the "With Google" branding. I wanted too revert back and get it swapped out. I also wanted to reflash Fresh to it...
obannvi said:
I have the "With Google" branding. I wanted too revert back and get it swapped out. I also wanted to reflash Fresh to it...
Click to expand...
Click to collapse
So of the people that have been having the issue where it fails at the licensing issue and gives you: Error[140]: Bootloader Version Error, all the ones I've talked to (only a couple of you) have had "with google" phones. Although all have said that they were able to RUU before and can't anymore.
If you strictly want to return to stock so that you can return the phone then I can help you. PM me.
flipzmode said:
So of the people that have been having the issue where it fails at the licensing issue and gives you: Error[140]: Bootloader Version Error, all the ones I've talked to (only a couple of you) have had "with google" phones. Although all have said that they were able to RUU before and can't anymore.
If you strictly want to return to stock so that you can return the phone then I can help you. PM me.
Click to expand...
Click to collapse
I just dont understand why its sluggish. It was never sluggish before. I figure by reverting back to stock and then re-freshing it, it should be ok.
You can try just clearing your cache (my app installer in my sig can help you do that) and then flashing fresh on top of itself to see if that helps the speed issue.
flipzmode said:
You can try just clearing your cache (my app installer in my sig can help you do that) and then flashing fresh on top of itself to see if that helps the speed issue.
Click to expand...
Click to collapse
I'll give it a shot. I do have a nand backup of my original install before I installed Fresh...I did that prior and then I installed Fresh again...
Didnt work, still sluggish. I did a wipe through the recovery menu so we'll see what happens.

[Q] Cant start in recovery or HBOOT, why?

Have a problem, I cant start the phone i HBOOT or recovery. Have done this multiple times before and have no problems. Have flashed openfire before this, maybe something to do with that?
Really want to be able to make this work, because my battery drains from full to empty in a couple of hours, so wanting to reflash opefire or try cynagonmod to see if that could help my problems.
How do I enable this again? (have tryed to install recovery from rom manager, says success, but cant start in recovery afterall)
Have tested volume down+power, ...backbutton+power, ...and restarting the phone in bootloader and recovery, nothing happends.
Maybe the right title would be, cant start in recovery or bootloader, but you get my point anyway =)
Thinking this is maybe something that has changed from my washinmachine-misstake? (se other thread for that)?
Okay now I am frustrated! As seen here in my first post I cant go into recoverymode, bootloader etc.
Thought the problem would be my battery or SD-card. But have bought a new battery and a new sdcard. Still I cant boot into the recoverymode.
This is really strange!!
Maybe my phone got bricked with openfire or something? Its really annoying that I am stucked with this ROM and have no chance of updating or try new ROMS from now.
Someone smart out here, maybe there is another solution to try out?
PLEEEEAAASEEEE!!!
You could try installing rom manager and flashing the latest version of clockworkmod recovery from there
Michealtbh said:
You could try installing rom manager and flashing the latest version of clockworkmod recovery from there
Click to expand...
Click to collapse
Have tryed that servel times! Not working, the phone starts as normal, even when the update.zip is in the root of sdcard. And cant start the phone from rom manager into recovery, not with voldown+power or from the reboot-options.
Maybe try re-rooting?
Michealtbh said:
Maybe try re-rooting?
Click to expand...
Click to collapse
cant do it, because I have formatted the computer aswell, and I cant install the android bootloader interface without turning the phone in HBOOT-mode...
Ah, then I'm stumped, sorry
Michealtbh said:
Ah, then I'm stumped, sorry
Click to expand...
Click to collapse
Yeah, me to! The only way to test it is if I could get a computer that already has the android bootloader interface. Or borrow another phone to install it. But dont have any friends with wildfire...doh!!

I think I may have bricked my phone..

I'm not sure if this has happened to anyone, but heres my story. I traded my bb 9800 torch with a friend of mines who went out of the country. When I got it, the phone was already rooted running an Ice glacier rom. I think this is where I made my mistake. I didn't know excactly how to remove roms, so I thought I could do it from the phone. So I booted into recovery mode, and clicked format, SYSTEM, DATA. Ever since then, it only boots to the Tmobile mytouch 4g logo and stays there. I tried to look up a fix, but my Windows XP PC wont recognize the phone, so I'm stuck there aswell. I'm stuck using a moto cliq atm, but if anyone can help, please do! Thanks,and Ihope its in the right section.
veezeyjs said:
I'm not sure if this has happened to anyone, but heres my story. I traded my bb 9800 torch with a friend of mines who went out of the country. When I got it, the phone was already rooted running an Ice glacier rom. I think this is where I made my mistake. I didn't know excactly how to remove roms, so I thought I could do it from the phone. So I booted into recovery mode, and clicked format, SYSTEM, DATA. Ever since then, it only boots to the Tmobile mytouch 4g logo and stays there. I tried to look up a fix, but my Windows XP PC wont recognize the phone, so I'm stuck there aswell. I'm stuck using a moto cliq atm, but if anyone can help, please do! Thanks,and Ihope its in the right section.
Click to expand...
Click to collapse
Pull the battery out of the phone, then put the battery back into the phone.
Turn the phone on and hold the volume down rocker, and the power button at the same time, that will boot you into HBoot.
Once you are there you will see an option for "recovery", select it. At the top you will see a number (given your buddy flashed a recovery image). If you see something to the degree of Clockwork Mod Recovery manger 2.x.x.x you can flash any 2.2 ROM from the development section. IF he flashed 3.0.0.5 you will need to flash Cyanogen Mod 7. IF he flashed 3.0.0.6 you can take your pick.
If you do not have a recovery image and only thing that comes up in a Tri-Angle with a "!" then you need to do the PD15IMG method. Which can be found here
Hope that helps point you in the right direction. Being that your phone is already Rooted please read, read, read, and read some more prior to doing anything that you are in question about. It's pretty hard to brick a phone.
And by the way... that little cliq not a bad phone... i just updated my old one to a new ROM.. for a standby... just in case type deal.
Your post helped thanks. I got a memory card reader and downloaded the stock rom to it.

Touchwiz Update bricked my non-rooted Tab (static lines across screen)!

I decided to go ahead with the TW firmware upgrade. Everything seemed to be going fine until I tried to install it and it told me there was an error and I needed to hook it up to Kies first. I had already been using Kies with it on my Macbook for a couple weeks now so I went ahead and plugged it in. Kies recognized it as usual and all the information came up.
So I went on and tried to install again and it said it needed to reboot.
It reboots and comes to the Samsung Galaxy Tab 10.1 screen like normal (right before it starts the galaxy animation). Next thing I know it comes to a screen that looks like the attached images! I immediately unplugged it from Kies and shut it down. Every time I start it back up it does the same thing. I honestly have NO idea what to do. I can't even return it as it's past the 14 day period and I (stupidly) didn't buy Staples' bogus $160 insurance.
I was not rooted before. This was a stock tab that I bought at staples. It had the firmware 4.24 when I bought it, I think.
Please, any help is appreciated. I tried doing firmware recovery in Kies but the pop up comes up in Korean and I have no idea what it says...
Edit: More info. I'm not the only one with this problem. Two other people have posted on AndroidPolice about this. http://www.androidpolice.com/2011/08/04/samsung-galaxy-tab-10-1-wifi-touchwiz-ux-update-is-now-live/
The software is definitely running underneath all that mess but it's literally impossible to see what is going or to touch anything.
I guess this thread is about the same issue
http://forum.xda-developers.com/showthread.php?t=1203610
Thanks, I'm checking the thread out now. I probably should have searched more than just Google before posting but I freaked out when it happened.
No need to freak out . we have xda and dev to solve all our problems
i have exactly the same problem as you... what should i do now?
I get the same screen but after rebooting! pfft it's making me really sad :\
I'm sorry but I tried reading this http://forum.xda-developers.com/showthread.php?t=1171089 and couldnt understanding what should I do!
What CWM + my device is not rooted, all I could understand is that the thread contains instructions on how to root your device..
I just want my normal screen back!
Please tell me what to do in simple english :\
And now I did a wipe and the stripes are gone, but the screen is black instead :\ still not working. Please help me!
Are you sure you didnt sit on it?
Amal Kadi said:
I'm sorry but I tried reading this http://forum.xda-developers.com/showthread.php?t=1171089 and couldnt understanding what should I do!
What CWM + my device is not rooted, all I could understand is that the thread contains instructions on how to root your device..
I just want my normal screen back!
Please tell me what to do in simple english :\
Click to expand...
Click to collapse
haha i had the same problem go look at my threat that was posted above. in thier someone posted instructions on what to do the link you posted contains the download to the things needed heres a basic rundown of what you need to do
install clockwork recovery mod "CWM" to replace your bootloader.
download and install stock 3.1 and you should have your tab back to normal.
my help thread has the instructions to instal CWM
tonyurquiza said:
haha i had the same problem go look at my threat that was posted above. in thier someone posted instructions on what to do the link you posted contains the download to the things needed heres a basic rundown of what you need to do
install clockwork recovery mod "CWM" to replace your bootloader.
download and install stock 3.1 and you should have your tab back to normal.
my help thread has the instructions to instal CWM
Click to expand...
Click to collapse
So I need to follow all the steps for rooting except the last one which is the actual rooting? Great thanx! Do I need to use Kies? My current computer is Mac but I guess I need to download those things to a Windows machine to make it work, right?
Thank you very much
I had the same problem. I upgraded the update on my non-rooted tablet and got the funked up video mess. Per instructions from Samsung support, I hard booted to the recovery menu (power+vol down, then power up, down on download screen) and did the factory wipe. After that I ended up with the black screen. I could tell things were working in the back but couldnt see a thing. I figured I would throw it on the Kies and it saw that there was a factory upgrade so I let the Kies run through it and it works fine now.
Dont know if this will help w/other but it worked for me.

[Q] Xoom files doesnt change

Hello guys,
i got a serious and frustrating problem here.
A few days ago my xoom was stuck on the M screen, so I used a thread in the forum and recovered it.
It solved myh problem back then, but since I had 3.2 before this and the solution injected me with Android 3.01 my problems started to show themselves.
the first one is that
<b> Through Fastboot, RecoveryMod, ADB </b> and any other way you can Imagine to install a new ROM or even remove or create a file,
All of them show success message but when I check them out I see no changes.
i tried fastboot and Recovery to install nearly every ROM,Recovery and bootimage in this site but so far it was wild goose chase.
so I want to ask if I'm doing anything wrong or if you need any more information here, but please help me with this
wow I cant believe it, All these masterminds here and no answer to my distress signal??
Guys I am so in trouble and this is the only place I hoped to get answered.
I can provide you with more info if you need, but please dont say I'm on my own here.
all these years this forum was the last hope for me.
i know I'll get my answer here one day
You are not being very clear about what you have done,, but I'm assuming that you reinstalled the stock image that got you back to HC 3.01. Can you see if you are able to get OTA updates to get you back to at least 3.1, or 3.2 if possible?
If that's my problem forgive me please, Ive written that post in 3:00AM
for the sake of clearity I should add some info:
1. I even tried stock ROMs but you see I cant even flash them (Not from Recovery nor Fastboot) the steps seem successful : it opens the package,it installs them and it says everything was a success. But when I restart the device I see nothing has changed.
2. OTA updates are the same, they keep downloading and when the sysem reboots to recovery to install them it cant find them.
3. You dont believe it if I say even files and programs that I remove from device by my hand(Android OS) are back after the first restart.
And you see it's dark magic! everything from a file to a partition are back by one reboot. I dont know what should I call it but I havent seen anything like it on the whole Internet.
So seems like I should make a competition for the xda experts here
Can you publish it so all of them can see it?
Mohfath said:
If that's my problem forgive me please, Ive written that post in 3:00AM
for the sake of clearity I should add some info:
1. I even tried stock ROMs but you see I cant even flash them (Not from Recovery nor Fastboot) the steps seem successful : it opens the package,it installs them and it says everything was a success. But when I restart the device I see nothing has changed.
2. OTA updates are the same, they keep downloading and when the sysem reboots to recovery to install them it cant find them.
3. You dont believe it if I say even files and programs that I remove from device by my hand(Android OS) are back after the first restart.
And you see it's dark magic! everything from a file to a partition are back by one reboot. I dont know what should I call it but I havent seen anything like it on the whole Internet.
So seems like I should make a competition for the xda experts here
Can you publish it so all of them can see it?
Click to expand...
Click to collapse
Actually, I have seen someone with the same problem here on this forum, but I can't recall exactly what the solution was.
Can you describe, step by step what you are doing, what cable you are connecting to your pc with, etc?
okantomi said:
Actually, I have seen someone with the same problem here on this forum, but I can't recall exactly what the solution was.
Can you describe, step by step what you are doing, what cable you are connecting to your pc with, etc?
Click to expand...
Click to collapse
That would be relief to know this could be solvable.
I will look more too.
As for your post I must say:
1. I plug the Xoom to the PC using the included cable
2. I start the xoom and start fastboot
3. on the PC system has the drivers and completely knows it
4. I start with SDK:
I. Fastboot oem unlock (Completing onscreen instructions and reboot device)
II. Fastboot mode again I use Fastboot flash boot boot.img
III. Continuing with Recovery,System
IV. Rebooting the device anything is the same.
My ROM is unchanged by the process and keeeeeeeeps giving the damn error of System process error please submit
5. And with ClockworkrecoveryMod I have the stock ROM on my sd card.
I. I choose install zip from sd card.
II.Choose the correct zip file and start flashing.
III. Choosing Wipe Data/Factory reset will take the device into a complete hang. unless I first use the mount page to mount the System/Data
IV. I reboot the device and ..... you know nothing changed.
so thats my story.
Still hope to find something about it.
Thanks...that was helpful. But now I want to know the following:
Were you rooted before the trouble started?
What did you do to recover?
If rooted, what version of CWM recovery did you have installed? Did you do a nanadroid backup? (I guess the answer is no, because you could have just restored with that).
What recovery are you accessing when trying to flash a zip file?
If you can answer these questions I will continue to wrack my brain trying to recall where I saw that thread.
Edit: please check out this thread http://forum.xda-developers.com/showthread.php?t=1370312
Some of what I said to him may help you .
okantomi said:
Were you rooted before the trouble started?
What did you do to recover?
If rooted, what version of CWM recovery did you have installed? Did you do a nanadroid backup? (I guess the answer is no, because you could have just restored with that).
What recovery are you accessing when trying to flash a zip file?
If you can answer these questions I will continue to wrack my brain trying to recall where I saw that thread.
Edit: please check out this thread http://forum.xda-developers.com/showthread.php?t=1370312
Some of what I said to him may help you .
Click to expand...
Click to collapse
Being rooted? -> Yes, The world is more beautiful with root!
to recover -> I followed this: http://forum.xda-developers.com/showthread.php?t=1097997 Shame it was Android 3.0
I use ClockworkRecovery 3.0.0.28 and I cant upgrade it cause of ... you know
And for your help I must say you are definitely the most caring person I know...
I'm off to check the provided link now
I was thinking of something that might be a reason.
I have this tiny problem:
When I go to CWM and choose Erase userData/Factory Reset Device Hangs
Click to expand...
Click to collapse
I was thinking of may be the userdata partition is corrupted and I gotta find a way to flash it completely.
Somehow I used Fastboot utility to do this and after saying Success, Nothing changed again.
Do you know any other way to physically do this job?

Categories

Resources