I updated my u8800-51 from 2.2.2 to the official 2.3.5 overseas version.
Now, hspa does not work or 3g
wifi doesn't work and bluetooth
and the phone is impossible to root.
is there anything i can do as of right now? someone please let me know...
nvidiaG1 said:
is there anything i can do as of right now? someone please let me know...
Click to expand...
Click to collapse
first of all be little descriptive about what u did . the best n safest way is u shud resinstall the official 2.3 or 2.2 . sometimes weird problems do occur while installing new rom but after u reinstall they r sorted out .
mkr17 said:
first of all be little descriptive about what u did . the best n safest way is u shud resinstall the official 2.3 or 2.2 . sometimes weird problems do occur while installing new rom but after u reinstall they r sorted out .
Click to expand...
Click to collapse
the phone isn't rooted so i have no recovery so i cant install a rom, i cant get a recovery on the phone cause my computer doesnt recognize the phone in pink screen mode. and the drivers are installed correctly for adb.
nvidiaG1 said:
the phone isn't rooted so i have no recovery so i cant install a rom, i cant get a recovery on the phone cause my computer doesnt recognize the phone in pink screen mode. and the drivers are installed correctly for adb.
Click to expand...
Click to collapse
Please, I need help. I have the same problem as OP, I have gone from Froyo 2.2.2 to official 2.3.5, however I think I used the official U8800 version, and I have a U8800-51. I have no wifi, and wanted to fix it, and now I am stuck. I want to go back to Froyo, but I can't use Roadkil's disk image at the moment because it won't recognize my device.
jgibson02 said:
Please, I need help. I have the same problem as OP, I have gone from Froyo 2.2.2 to official 2.3.5, however I think I used the official U8800 version, and I have a U8800-51. I have no wifi, and wanted to fix it, and now I am stuck. I want to go back to Froyo, but I can't use Roadkil's disk image at the moment because it won't recognize my device.
Click to expand...
Click to collapse
u dont need recovery to install official rom . put the official 2.3 in d sd card n follow d instructions given under official 2.3 under development post . dont worry ur phone will work flawlessly aftr dat
Related
i have rooted my htc wildfire it is on t-mobile now when i try and install the RUU i keep getting an error 140 telling me that the bootloader version error and that the rom update utility cannot update your android phone please get the correct rom update utility and try again. can someone please tell me what to do thank you
keep it rooted.
much of us are tryin to get root (with froyo)
Buldog said:
keep it rooted.
much of us are tryin to get root (with froyo)
Click to expand...
Click to collapse
i dont mind keeping it rooted however when i had installed psfreedom i have a bug where if the phone is switched of and you charge the phone it will freeze and wont switch on untill u take out the battery and fix to this? i put a custom rom on the phone and still nothing
Ok can you tell us step by step what you´ve done with your phone and please tell us the versions you used.
yea keep it rooted
lilzad said:
i dont mind keeping it rooted however when i had installed psfreedom i have a bug where if the phone is switched of and you charge the phone it will freeze and wont switch on untill u take out the battery and fix to this? i put a custom rom on the phone and still nothing
Click to expand...
Click to collapse
Its a Clockworkmod recovery bug, and, will be present in a rooted phone with a Stock ROM also. There is no workaround as users who have installed the new version state this bug persists.
3xeno said:
Its a Clockworkmod recovery bug, and, will be present in a rooted phone with a Stock ROM also. There is no workaround as users who have installed the new version state this bug persists.
Click to expand...
Click to collapse
last time when i had installed the offical RUU it got rid of everything and all was working fine but this time i dnt no if i installed a newer custom rom or what but i cant seem to flash it back to the original
Have you wiped the system and the cache?
help mates i have htc hang on logo only..
i did reset clear storage but still same...
i also try to update the rom using sd card.but it not works..
anyone pls help me give idea how to solve this problem..
if i put to recovery mode it showing RED sign and phone..
richard_xcellent said:
help mates i have htc hang on logo only..
i did reset clear storage but still same...
i also try to update the rom using sd card.but it not works..
anyone pls help me give idea how to solve this problem..
if i put to recovery mode it showing RED sign and phone..
Click to expand...
Click to collapse
Have you tried flashing an RUU?
djdevine2 said:
Have you tried flashing an RUU?
Click to expand...
Click to collapse
can u tell how to flash this phone..im newbie on this problem that's why.?
pls let me know how to flash this phone..
tnx in advance....
someone pls help me.............................
Is the phone rooted?
Did you start this with rom manager?
Do you have a recovery flashed?
Did you do a full backup beforehand?
- Posted via mobile
how can i by pass that red exclamation point to install the file from sd card....
Avid Droidery said:
Is the phone rooted?
Did you start this with rom manager?
Do you have a recovery flashed?
Did you do a full backup beforehand?
- Posted via mobile
Click to expand...
Click to collapse
i take the phone like this htc hang logo no backup.
can u pls share the rom manager for htc wildfire....
http://www.google.com/gwt/x?gl=us&c...roubleshootingandErrorRecoverySprintTP2MR.pdf
Sorry but I've never heard of anything like that. There should be a recovery tool for windows. I only have this phone so you will have to investigate for yourself.
Keep looking in this thread someone else will come along soon.
I hope this helps.
- Posted via mobile
Aha! I googled it out 4 u i tink...
http://forum.xda-developers.com/showthread.php?t=881138
* edit maybe i shouldnt try to be so helpful
I believe your question can be answered in that forum.
- Posted via mobile
Avid Droidery said:
Is the phone rooted?
Did you start this with rom manager?
Do you have a recovery flashed?
Did you do a full backup beforehand?
- Posted via mobile
Click to expand...
Click to collapse
how can i know this phone is rooted phone status now is hang on htc logo?
and how to rooted this phone...
can u pls help me bro..tnx
Avid Droidery said:
Aha! I googled it out 4 u i tink...
http://forum.xda-developers.com/showthread.php?t=881138
- Posted via mobile
Click to expand...
Click to collapse
thnk u very much bro...i really apreciate your effort to give me a help...
now downloading ill post wat result...thnk u so much...
I haven't used a windows phone in years! I did not realize your phone was windows until I sent you that link. Please follow the thread and post your questions here -->
http://forum.xda-developers.com/showthread.php?t=881138
- Posted via mobile
It's obvious your phone is not rooted. Try flashing an RUU.
1: Visit here:
http://shipped-roms.com/index.php?category=windows mobile&model=Buzz
2: Get any Eclair RUU,
RUU_Buzz_HTC_WWE_1.37.405.1_Radio_13.53.55.24H_3.35.19.25_release_151892_signed.exe
(I am assuming your phone was not operator locked / branded)
3: Connect your Wildfire to your PC, and, run the EXE file. (Note: Make sure the EXE file downloads fully. It is approx 130 MB in size)
4: Let the process complete (Takes ~15 minutes)
If it is successful, check whether the phone starts up properly or not. If it still doesn't, return it to you dealer and claim your warranty.
3xeno said:
It's obvious your phone is not rooted. Try flashing an RUU.
1: Visit here:
http://shipped-roms.com/index.php?category=windows mobile&model=Buzz
2: Get any Eclair RUU,
RUU_Buzz_HTC_WWE_1.37.405.1_Radio_13.53.55.24H_3.35.19.25_release_151892_signed.exe
(I am assuming your phone was not operator locked / branded)
3: Connect your Wildfire to your PC, and, run the EXE file. (Note: Make sure the EXE file downloads fully. It is approx 130 MB in size)
4: Let the process complete (Takes ~15 minutes)
If it is successful, check whether the phone starts up properly or not. If it still doesn't, return it to you dealer and claim your warranty.
Click to expand...
Click to collapse
i try this procedure but i get error 131...
how 2 solve this problem...
richard_xcellent said:
i try this procedure but i get error 131...
how 2 solve this problem...
Click to expand...
Click to collapse
Is your phone an operator branded one?
Anyway, to solve that, you will need to create a goldcard. Guide here:
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
But remember, if your phone is branded, this will remove their ROM and add a stock HTC WWE (Worldwide English) one, probably voiding the warranty if there is no RUU for your carrier.
problem solved i flash with same version..
tnx to all....
Moved thread to general as it is not about android development
This is a T mobile Us Device
SO I was trying to Help My Buddy Fix His HD2 And We Ended Up With A Brick.. LOL
So It Will Not Turn on Boot in Magldr ect.. I have charged the battery on a external ... With No Response from the phone .. When I plug it into the Computer It does Recognize it and Try and install Drivers (This is a T mobile Us Device).. I have a Evo So im not used to windows devices or Tmobile Im afraid that We installed the wrong radio Perhaps And We Bricked Her GOOD .. I was just wondering if there is any Hope For this HD2 I have tried to look up SDK ADB Fixes But I could not seem To Find Any Good Explanation On How To DO this Or If this phone Is Beyond That type of Fix.. Any Help Will Be greatly Apprishiated Even If Its a simple your S%$#@ Out of Luck ..LOL .. I Do have a good understanding Of android But Not WIN Devices . Im no Dev but have Flashed A good amount of ROMS ect.. Thanks
What ROM did you install ? full file name or link is needed ...
You flashed it from SD card ?
I was Gonna Flash one through CWM But Ge Ran the RUU When I was away For a sec So it was through the magldr not flashed
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U
I It was the wrong radio So it bricked It is what im thinking
http://htcpedia.com/official_wm_rom_htc_hd_leo_english_version/soft/htc-leo-rom/download.html
This Phone Has Been Flashed A bunch Of Times on Android And He was truing to go to windows to fix GPS Stuff
I'm uploading the file to file share because u need to sign in the other Site .. I'm pretty Sure I know what happened .. That the ROM Was Not for T mobile
I think
NUGZZ420 said:
I was Gonna Flash one through CWM But Ge Ran the RUU When I was away For a sec So it was through the magldr not flashed
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U
I It was the wrong radio So it bricked It is what im thinking
http://htcpedia.com/official_wm_rom_htc_hd_leo_english_version/soft/htc-leo-rom/download.html
This Phone Has Been Flashed A bunch Of Times on Android And He was truing to go to windows to fix GPS Stuff
I'm uploading the file to file share because u need to sign in the other Site .. I'm pretty Sure I know what happened .. That the ROM Was Not for T mobile
Click to expand...
Click to collapse
I'm no Pro At Any of this .. I was hoped there was a Way I could Stoke My Buddy Out And Get It fixed
http://www.mediafire.com/?d86d6za3bdvw412
Here the file
Yeh i believe that comes with a 2.04.50 radio that will brick TMOUS HD2.
If unsure of what you are doing always get the original ROM from HTC US T-Mobile using device IMEI:
http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo
I would of this was what a friend Pushed on his phone ty for your help .. theres no luck for this brick huh?
We tried that it wouldnt see the device as windows .. because it had be on android I guess
NUGZZ420 said:
We tried that it wouldnt see the device as windows .. because it had be on android I guess
Click to expand...
Click to collapse
If you tried official link & the devices IMEI found in battery area build label it would indeed supply download regardless of it being on Android or W7 or anything else .
Could of extracted ROM & flashed from SD too.
pretty much fubarbed I suspect ... JTAG required ...
worth waiting to see if anymore replies confirm the same ...
worth waiting to see if anymore replies confirm the same ...
Click to expand...
Click to collapse
you're right, misterB, its gone. jtag or new mainboard required.
Hello, the other day I Root my HTC Wildfire with revolutionary. And installed honeyfire-alpha-2 onto my HTC Wildfire. And when I tryed to connect it to my computer nothing happens. The only thing that comes up on my phone that it says its charging and thats all. I have tryed to remove the honeyfire-alpha-2 and nothing happens, and one more thing I got it of this site the honeyfire-alpha-2 Root App. If anyone can help me bring my phone back to stock that would be very helpfull. Thanks!...
uR x S0NiiC said:
Hello, the other day I Root my HTC Wildfire with revolutionary. And installed honeyfire-alpha-2 onto my HTC Wildfire. And when I tryed to connect it to my computer nothing happens. The only thing that comes up on my phone that it says its charging and thats all. I have tryed to remove the honeyfire-alpha-2 and nothing happens, and one more thing I got it of this site the honeyfire-alpha-2 Root App. If anyone can help me bring my phone back to stock that would be very helpfull. Thanks!...
Click to expand...
Click to collapse
Honeyfire is an experimental rom, so I wouldn't even try it. However, its quite easy to get back to a stock configuration..even if you haven't backed up. First, download a safe-flash zip of a froyo ruu. Then go into CWM. Do a wipe data/factory reset and wipe cache too. Then flash the safe-flash zip. Then you'd be back to stock.
uR x S0NiiC said:
Hello, the other day I Root my HTC Wildfire with revolutionary. And installed honeyfire-alpha-2 onto my HTC Wildfire. And when I tryed to connect it to my computer nothing happens. The only thing that comes up on my phone that it says its charging and thats all. I have tryed to remove the honeyfire-alpha-2 and nothing happens, and one more thing I got it of this site the honeyfire-alpha-2 Root App. If anyone can help me bring my phone back to stock that would be very helpfull. Thanks!...
Click to expand...
Click to collapse
if i can correct your words..
u didnt root your phone with revolutionary.. honestly the "rooting" is very close to hoax..
if u used revolutionary u got full S-OFF (Security-Off) and new recorvery system (Revolutionary ClockworkMod Recovery 4.0.1.4)
S-OFF gives u opportunity to:
Flash new OS
Flash new radio
Disable SIM lock
"Rooting" is on turn when u have installed OS and u need to gain root permissions.. thats all..
back to your problem...
and lets start with a question..
did u backup your original OS ? if yes.. coming back is easy..
if no (thats smart)... u will always depend on some downloaded file.........
(suppose that u have access only to one same phone)
...but this all is just about the sources
because.... WHAT DO U REALLY WANT ?
do u want to stay S-OFF with ClockworkMod Recovery but with original OS ?
or u want to S-ON with that Stock Recovery thing and with original OS ?
Edit:
btw if this
uR x S0NiiC said:
I have tryed to remove the honeyfire-alpha-2 and nothing happens
Click to expand...
Click to collapse
mean that u removed it from your SD card... u re lost case...
How about a little better attitude?
broncogr said:
How about a little better attitude?
Click to expand...
Click to collapse
Lol.
sent from my android powered beast!
http://shipped-roms.com/index.php?category=android&model=Buzz
Try to download RUU WWE(world wide english), and install it.
You will stay S-OFF, but if you are S-off with revolutinary try this:
http://forum.xda-developers.com/showthread.php?p=14693680
Easy to do all that things so you won't have problems(I hope).
Hi,
I have Gingerbread 2.3.5 (Nexus) as the only Operation System on my HD2. It crashes when I use some application e.g. Scan my SD card for medias, using a music player. Now I want to switch to a better ROM like MIUI (that's what I've heard). How can I do that?
Please consider that:
- I'm beginner
- I have only Android (No Windows)
- I have HSLP v 3.* (A version of MIUI which I downloaded and tried to install, only support HSPL v 2.* or bellow)
I will appreciate any kinds of help.
Thanks,
Mas
what loader do you have?
anyways check out the link below & give them a good read, it might help
mengfei said:
what loader do you have?
anyways check out the link below & give them a good read, it might help
Click to expand...
Click to collapse
If I'm not mistaken, this is the bootloader and other info which I have:
LEO100 HX-BC SHIP S-OFF
HBOOT-1.5.0.1
SPL 3.03
RADIO-2.15.50.14
And bytheway, it seems that I made a mistake in my subject. In the bootloader menu it says "NAND Android"
sallaneh said:
If I'm not mistaken, this is the bootloader and other info which I have:
LEO100 HX-BC SHIP S-OFF
HBOOT-1.5.0.1
SPL 3.03
RADIO-2.15.50.14
And bytheway, it seems that I made a mistake in my subject. In the bootloader menu it says "NAND Android"
Click to expand...
Click to collapse
Either I'm new, or that phone's details look weird.
Where did you get it from? And if you're a beginner, how did you manage to get Android on it?
Marvlesz said:
Either I'm new, or that phone's details look weird.
Where did you get it from? And if you're a beginner, how did you manage to get Android on it?
Click to expand...
Click to collapse
Well! I asked (and paid) someone to install it for me
I'm thinking about re-installing a Windows and then install an android on my SD card if I don't have any other options.
You've been given a fake I think. The HD2 doesn't have HBOOT or S-ON/OFF in the bootloader.
Nigeldg said:
You've been given a fake I think. The HD2 doesn't have HBOOT or S-ON/OFF in the bootloader.
Click to expand...
Click to collapse
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5
sallaneh said:
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5
Click to expand...
Click to collapse
Doesn't mean that it's an HD2.
sallaneh said:
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5
Click to expand...
Click to collapse
you can get one here as low as $100 New
http://s.taobao.com/search?q=HTC+HD...rceId=tb.index&spm=1.1000386.5803581.d4908513
haha. Well I got it as a brand new phone some times ago by myself and was using Windows phone but recently asked from someone to install Andorid on it so it is not a fake.
I wonder to know if there is a way to return my windows phone back and then install an Android on its SD card.
sallaneh said:
haha. Well I got it as a brand new phone some times ago by myself and was using Windows phone but recently asked from someone to install Andorid on it so it is not a fake.
I wonder to know if there is a way to return my windows phone back and then install an Android on its SD card.
Click to expand...
Click to collapse
Could you upload pictures of the screens where u see that stuff?
And to return to winmo 6.5,
1. downlad the rom from htc.com
2. boot into the bootloader ( to do this, turn off the phone, turn it on while holding the volume down and power key until u boot into the bootloader )
3. Connect your phone to the pc using the usb
4. The 'serial' word should change to 'usb', at this point, just run the rom.
All this is assuming you have a HD2.
adil1508 said:
Could you upload pictures of the screens where u see that stuff?
And to return to winmo 6.5,
1. downlad the rom from htc.com
2. boot into the bootloader ( to do this, turn off the phone, turn it on while holding the volume down and power key until u boot into the bootloader )
3. Connect your phone to the pc using the usb
4. The 'serial' word should change to 'usb', at this point, just run the rom.
All this is assuming you have a HD2.
Click to expand...
Click to collapse
Thanks for your reply and assumption!
I have a question though, do I need to do task29 first then do your 1-4 steps?
I won't face any problem due to the version of my SPL etc?
Regards
sallaneh said:
Thanks for your reply and assumption!
I have a question though, do I need to do task29 first then do your 1-4 steps?
I won't face any problem due to the version of my SPL etc?
Regards
Click to expand...
Click to collapse
Hi, I would use task29, as it wipes the internal memory clean. Do note that some people have bad blocks ( a bit of corrupted memory ) after using task29. But i have used it alot and never faced this issue, If u havnt done it before, no harm it using it.
adil1508 said:
Hi, I would use task29, as it wipes the internal memory clean. Do note that some people have bad blocks ( a bit of corrupted memory ) after using task29. But i have used it alot and never faced this issue, If u havnt done it before, no harm it using it.
Click to expand...
Click to collapse
tnx.
I will try task29 and lets see what will happen.
As you can see in the title, I have a NAND Gingerbread 2.3.5 (Nexus) and I'm not very happy with it so I want to recover my winmo 6.5 and then install another rom of Androdi on my SD. Am I in the right path?
- task29
- put the stock rom on my SD
- reboot and install the winmo 6.5
regards,
Masood
its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use
adil1508 said:
its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use
Click to expand...
Click to collapse
How can I move to Typhoon Rom then? Do I need to remove everything?
As you might remember, I have a Nexus 2.3.5 NAND on my HD2.
Regards
sallaneh said:
How can I move to Typhoon Rom then? Do I need to remove everything?
As you might remember, I have a Nexus 2.3.5 NAND on my HD2.
Regards
Click to expand...
Click to collapse
Alright. U have android 2.3.5. Thats really old. You will have to answer some questions,
1) Do you have clockworkmod recovery( CWR ) installed?
2) Did u flash the rom yourself? Are you familiar with the whole flashing process?
I'm guessing you already have MAGLDR bootloader installed. And you dont need to remove everything. You will be adding a few things, thats all.
Btw, you will have to make backups of everything you need. Eg, stuff on your sd card, pics and all. And your SD card WILL BE WIPED CLEAN.
I JUST READ YOUR OLD POST. lol sorry
If you have MAGLDR installed, Which probably is, you dont need task29. Its quite simple from there actually
adil1508 said:
its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use
Click to expand...
Click to collapse
adil1508 said:
Alright. U have android 2.3.5. Thats really old. You will have to answer some questions,
1) Do you have clockworkmod recovery( CWR ) installed?
2) Did u flash the rom yourself? Are you familiar with the whole flashing process?
I'm guessing you already have MAGLDR bootloader installed. And you dont need to remove everything. You will be adding a few things, thats all.
Btw, you will have to make backups of everything you need. Eg, stuff on your sd card, pics and all. And your SD card WILL BE WIPED CLEAN.
I JUST READ YOUR OLD POST. lol sorry
If you have MAGLDR installed, Which probably is, you dont need task29. Its quite simple from there actually
Click to expand...
Click to collapse
I will check these parameters as soon as I get home!
sallaneh said:
I will check these parameters as soon as I get home!
Click to expand...
Click to collapse
Good,
Btw, here is the rom link. Download it. Its neccassay regardless of what answers you provide
http://forum.xda-developers.com/showthread.php?t=933951