Related
Can anyone put this in a cw flashable zip or have one already? I need to get rid of the stupid popup that tells me my battery is full. It wakes me up and it seems to keep my alarm clock from going off sometimes!?
1. decompile/de-odex services.jar/odex
2. open "com\android\server\status\StatusBarPolicy.smali" in a text editor
find ".method private showFullChargePopup()V" about line 2779
and remove the entire method all of it from ".method private showFullChargePopup()V"
to .end method
and delete this line at about line 3441
invoke-direct {p0}, Lcom/android/server/status/StatusBarPolicy;->showFullChargePopup()V
3. save, compile and re-odex as necessary
Click to expand...
Click to collapse
What ROM version and theme? The services.jar file changes between roms and themes.
Blackhole 3.0 DL09
Oh my god! If you could also do this for me, or just tell me how or something ( I have no idea what the dedeoxin' does or anything) I would be forever thankful! haha
I have DJ05 Superclean JT rom
Its just an simple apk you can get rid of via root explorer or titanium backup or whatever.
In titanium its called FullBatPopupApp 1.0, I have removed it with no ill effects. The name of the apk in /system/app/ is FullbatPopup.apk
Sent from my SCH-I500 using Tapatalk
1. You need to have java installed for this. You will also need smali/baksmali
2. Open command prompt or linux terminal with your phone plugged in. Also navigate to or create a directory to perform the work in.
3. Once in your working directory, run:
Code:
adb pull /system/framework/services.jar
3a. If your system isn't de-odexed, you may need to pull an odex file as well
4. Take the smali/baksmali files you downloaded earlier and put them in the same directory that your services.jar file is in.
5. Run the following (assumes windows command prompt):
Code:
java -jar baksmali-<version>.jar services.jar
5a. If your system is not deodexed, you will likely need to deodex the system/services.jar for this to work.
6. Open the file required for the edit and make the needed changes.
7. Run the following (again, assuming windows command prompt):
Code:
java -jar smali-<version>.jar out -o classes.dex
8. Replace the classes.dex file within services.jar with the new classes.dex file
9. Push the file to /system/framework with adb, then reboot:
Code:
adb push services.jar /system/framework/services.jar
adb reboot
9a. You may need to remount the /system partition as rw to push the file.
10. On restart, the phone will take longer to boot, but assuming the changes were made properly you should be good.
I left out some information for the "a" steps on purpose. If you cannot do these steps yourself, or find how to do them, you likely shouldn't be doing this on your own. As always, backup your phone/data before trying this, and I am not responsible for any lost data, non-booting phones, or bricked devices. If you are unsure of what you are doing, then don't do it.
n0yd said:
Its just an simple apk you can get rid of via root explorer or titanium backup or whatever.
In titanium its called FullBatPopupApp 1.0, I have removed it with no ill effects. The name of the apk in /system/app/ is FullbatPopup.apk
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
Removing that does nothing, already did it and I still get the popup.
Or just find the post with the hidden menu dialer codes and turn it off that way.........
Sent from my SCH-I500 using XDA App
Even the hidden dialer menu does not always work either. Plus I thought the hidden menu was not accessible in DJ05/DL09? Maybe this is with certain roms?
yea I hate that popup. Ive removed the apk also and still it keeps popping up. A fix would be greatly appreciated!!!
The dailer codes worked for me. Using Blackhole 3.0. Just make sure you include the Hidden Menu when building your rom.
Sent from my SCH-I500 using XDA App
imnuts said:
Removing that does nothing, already did it and I still get the popup.
Click to expand...
Click to collapse
Weird, I never noticed. Thanks for letting me know
Sent from my SCH-I500 using Tapatalk
+1 on getting rid of this stupid pop up.
Man I hate that thing.
I posted instructions on how to do it. I'm not going to do the mod for everyone, so do it on your own, or ask the rom builder to include the change in the rom. There are to many roms and themes out there to try and accomplish this for every possible combination.
Hidden menu method would not work for me on dj05.
Changed it to disabled and it still pops up
I just went in with root explorer and mounted system/app as RW, renamed FullBattPopup.apk to FullBattPopup.apk.OLD and it did not get recreated after a reboot. I guess I'll have to wait till a full charge to see if it comes back.
I just used Titanium Backup to freeze FullBatPopupApp.
Will report back after I change my phone....
Sent from my Samsung Fascinate
Pfredd said:
I just used Titanium Backup to freeze FullBatPopupApp.
Will report back after I change my phone....
Sent from my Samsung Fascinate
Click to expand...
Click to collapse
As I figured, freezing didn't remove the popup.
I went ahead and edited the services file, as specified earlier in this post. I followed the procedure provided by imnuts and did the edits as specified in the post by Nimhlan.
It appears to work like a charm. No more Full battery popups!
I would post my edited file, but I suspect it is dependent on what kernel/ROM you are running....
Do you download the smali 1.26.jar & baksmali 1.26 jar or just the baksmali & smali file in the link provided.
ellisz said:
Do you download the smali 1.26.jar & baksmali 1.26 jar or just the baksmali & smali file in the link provided.
Click to expand...
Click to collapse
You need the *.jar files. However, I tried making the edit and I still get the popup.
Found this thread on the HTC Hero section for it's open GL will this work for our wildfire?
http://forum.xda-developers.com/showthread.php?t=899801
Yea I flashed it, noticed an improvement in playing angry birds...i think.
Sent from my HTC Wildfire using XDA App
Will it work on cm7 nightlies kevin?
Sent from my HTC Wildfire using XDA App
Yeah
Sent from my HTC Wildfire using XDA App
Yes it works with just about every ROM, but, in my view, I can't see any benefit. (I dont play Angry Birds, and, the rest of the games and LWP's don't show any benefit).
How do you do this?
Just flash it like a rom?
Well, that's what I initially did. Flash the ZIP in Post #49 in that thread. But, on reading that complete thread, I guess you have to edit the build.prop file in /system (Using Root Explorer / ADB Push Pull).
However, this is where I cant get it to work. WHenever I add the 2 lines in Root Explorer and Save Changes, the phone reboots. If I use ADB, even after pushing, when I check the same file using build.prop, no changes are visible, (The opengles.version automatically reverts back to 65536 and the line which enabled hardware acceleration of the UI is gone) and, ASI only shows OpenGL 1.0 due to this
Well, I have no idea what I am doing wrong, will try it out again and see..
I'm a newb with this.
Could someone possibly make a bit more explained guide?
Very basic guide:
* Get Root Explorer or any other file manager that can show the root folders
* Open Root Explorer, change permissions on top to R/W (Be very careful after that. Dont delete anything!)
* Locate the file build.prop under /system
* Long Press the file, Select Edit with Text Editor
* Updated: (ADB Commands Copy - Pasted from another post by kevin2516. Thanks mate )
*Make sure ADB is installed on your system and it is working. There are many guides available to install ADB, so I wont be going into that.
*Start Command Prompt (cmd), Browse to your "Tools" folder into your SDK
*Use the ADB Pull Command adb pull /system/build.prop
*This will now be saved to your tools folder. Edit is using Wordpad / Notepad++ (Not Notepad) as follows:
*Locate a line which starts with dalvik. (The first one, there are 3 of them)
Add the following 2 lines before that:
debug.sf.hw=1
ro.opengles.version=65537
* Save it.
* Push it back to System using the ADB Push Command: adb push build.prop /system/build.prop
* Reboot ADB using the adb reboot command
* Then, grab the Flashable Zip in that thread from Post #48
* Flash it as normal
Done.
Check whether it is implemented or not by going to Android System Info > System Tab > OpenGL. Here, there are 2 OpenGL versions. The first line should say 1.1, and the second should say OpenGL 1.0 ES.
With S-On you cannot change the systemfile directly I think. Thats the reason why your system not keep the change. I have write by myself a little install zip and flash it with nandroid and it works. the zip only works with wildpuzzlerom v0.8 and you can find in the thread for wpr0.8.
bgx said:
With S-On you cannot change the systemfile directly I think. Thats the reason why your system not keep the change. I have write by myself a little install zip and flash it with nandroid and it works. the zip only works with wildpuzzlerom v0.8 and you can find in the thread for wpr0.8.
Click to expand...
Click to collapse
Well, I took your flashable ZIP, removed the build.prop it contained, and replaced it with the build.prop of CM7 Nightly 2. Then, I tried flashing it, still no change.
Now, I have no idea whether I am 'allowed' to change flashable ZIP's like that or not, but, from what it is looking like, I am still unable to get this working on CM7NB2. I'll probably try making a flashable ZIP from scratch later as I get time.
bgx said:
I have write by myself a little install zip and flash it with nandroid and it works. the zip only works with wildpuzzlerom v0.8 and you can find in the thread for wpr0.8.
Click to expand...
Click to collapse
If it's simple enough, it would be nice if you could tell how to do a flashable zip (or yourself make a one suitable for CM6/7 ). I just want to test these libraries on CM7, any help is appreciated
Don't expect nothing special, I'm not a dev!
3xeno said:
Very basic guide:
* Get Root Explorer or any other file manager that can show the root folders
* Open Root Explorer, change permissions on top to R/W (Be very careful after that. Dont delete anything!)
* Locate the file build.prop under /system
* Long Press the file, Select Edit with Text Editor
* Then, locate a line which starts with dalvik. (The first one, there are 3 of them)
* Add the following 2 lines before that:
debug.sf.hw=1
ro.opengles.version=65537
* Save and Exit
* Then, grab the Flashable Zip in that thread from Post #48
* Flash it as normal
Done.
Check whether it is implemented or not by going to Android System Info > System Tab > OpenGL. Here, there are 2 OpenGL versions. The first line should say 1.1, and the second should say OpenGL 1.0 ES.
Click to expand...
Click to collapse
But it's not working for CM7?
Where can i find FLashable zip? I don't understand where is post #48
Even if i find, i have read, that it's not working? Or working?
You can find the OpenGLES 1.1 Flashable ZIP in Post #48 of this thread:
http://forum.xda-developers.com/showthread.php?t=899801
I have updated my post since Root Explorer method doesnt work (No S-OFF).
3xeno said:
You can find the OpenGLES 1.1 Flashable ZIP in Post #48 of this thread:
http://forum.xda-developers.com/showthread.php?t=899801
I have updated my post since Root Explorer method doesnt work (No S-OFF).
Click to expand...
Click to collapse
You wrote : last edit: I didn't notice any difference, much like the test ran above. I'm going to revert until more knowledgeable people look at this.
if it is like you saying, then i dont have point to that **** too.
i think devs who makes this rom should instal in rom everything what can increase perfomance. so im waiting for the rom with all those things instaled.
will it happen someday?:/
vilks said:
You wrote : last edit: I didn't notice any difference, much like the test ran above. I'm going to revert until more knowledgeable people look at this.
if it is like you saying, then i dont have point to that **** too.
i think devs who makes this rom should instal in rom everything what can increase perfomance. so im waiting for the rom with all those things instaled.
will it happen someday?:/
Click to expand...
Click to collapse
Which is exactly what I said in the CM7 thread. No one here has till date, found verifiable gains, with using OpenGL on the Wildfire. Everyone reports the same thing, that there is no or absolutely negligible (Which I think is just a mind thing) change in gaming / intensive applications performance.
If you are looking for ROM's wit inbuilt OpenGLES Support, WildPuzzle has a flashable ZIP, and DS and DK Roms provides it inbuilt in its latest version. For the others, the manual method has to be followed.
Hello ACE user's I proudly present you the best of the best script ever made, created by zeppelinrox.
Well, the V6 Supercharger Script is an excellent tool to fix memory management on Android 2.3, just because the Gingerbread is very aggressive in memory management.
For best details on what this script do to your beloved phone visit his thread, he doesnt say this will run in ACE but i manage and tried to install in my phone and it works fine and now i say this is the best experience since i got this phone in my hands.
here we go.
Requirements:
1. Download busybox installer from market.
2. Download script manager from market.(make sure you instal this in INTERNAL memory)
3. Download V6 supercharger latest script from the original thread here.
4. Rootexplorer and of course you must be rooted.
Steps:
1. Run busybox installer and install busybox v1.18.2 (this will downgrade our current busybox v1.18.4) we need this because v1.18.3 above will cause an error which is not. (see attached image)
2. Run and configure script manager press the MENU button and go to MORE and then in ADVANCED OPTIONS and now in CONFIG and tick "browse as root" and leave other fields un-touch and exit. (see attached image)
3. Download V6 supercharger update8 script in original thread above and put in root of your sd card. (see attached image)
4. Run script manager by default it views the root of your sdcard find your downloaded V6 supercharger script and click/touch to it another window will appear tick "run as root" then run the script. (see attached image)
5. You will see the script running first chose a scrolling speed from 1-3 by touching the screen for the keyboard to pop-up (i prefer 3 for slow so you can follow the progress) then press enter in your keyboard.
6. Now you will see an option from 1-17 it has different value each option, select option 6 (balance 3) its the best for me, you can try other options of course, now press enter after typing # 6, wait to finish the scipt from running.
7. Now type option 16 to reboot the phone, the script will autorun, thats it enjoy and fell the greatness of your phone.
To check that the script is running and working please do step 4 and 5 and see attached image encircled in red if you have the same value then your good.
Optional: loopy smoothness. Very nice script and works very will with V6.
wow, supercharger..
surely will try it
Thanks
but there's is something written there
If you want to share this, just link to this thread.
If you want to make a thread in other forums telling people about it, that's great.
But I would prefer that you do not post a copy of the V6 SuperCharger installation script in those forums.
If you already have a thread with a copy attached, I won't bother you about it. But please don't attach further updates.
i have Check's RAM Management Script ☜☆☞ V4 Twin Turbo [CF-Root Adaptation] installed on my ace. can i install this v6 supercharger?
do i need to delete that script? if so how to delete?
thanks
+1... but can you explain more how and which areas it does the work and how it is better than others if any
Edit: sorry i went through the other thread and got some answers...Thanks neways
fantomatico said:
i have Check's RAM Management Script ☜☆☞ V4 Twin Turbo [CF-Root Adaptation] installed on my ace. can i install this v6 supercharger?
do i need to delete that script? if so how to delete?
thanks
Click to expand...
Click to collapse
You can delete his tweak using root explorer, go to system/etc/init.d, mount r/w first.
dungos said:
+1... but can you explain more how and which areas it does the work and how it is better than others if any
Edit: sorry i went through the other thread and got some answers...Thanks neways
Click to expand...
Click to collapse
I cant copy the original threads explanations, kindly visit his thread the link is above, you will know whats the big difference of his script than others.
seilent said:
wow, supercharger..
surely will try it
Thanks
but there's is something written there
If you want to share this, just link to this thread.
If you want to make a thread in other forums telling people about it, that's great.
But I would prefer that you do not post a copy of the V6 SuperCharger installation script in those forums.
If you already have a thread with a copy attached, I won't bother you about it. But please don't attach further updates.
Click to expand...
Click to collapse
I share here on what to do step by step in our ACE, its not there in his thread, but if someone knows how to install his script then one can go diectly to his thread for updating, BTW i will edit my post saying i will update if he has released new.
I always busybox error, asking me to change the version, I can not install ..... you know why? Thanks to all
kaarburo said:
I always busybox error, asking me to change the version, I can not install ..... you know why? Thanks to all
Click to expand...
Click to collapse
Did you follow the instruction? did you install the busybox 1.18.2?
How about CF-Root? Is this compatible with CF-Root? CF-Root has busybox preinstalled...
For example, Black Hawk has busybox v.1.17.1, there is no need to instal another version of busybox.
All works, thanks.
royskeyz said:
You can delete his tweak using root explorer, go to system/etc/init.d, mount r/w first.
Click to expand...
Click to collapse
His tweak overwrote 00tweaks on init.d wich came by default with CodeROM v2x-2b.
Any problem if i just leave it and install yours?
thanks
royskeyz said:
Did you follow the instruction? did you install the busybox 1.18.2?
Click to expand...
Click to collapse
yes, I installed busybox 1.18.2, but I error. KPN I + CF-Root v80 stocks, that is the problem?
impressions:
1. increased rate of transitions from the menu.
2. pause when awake is almost negligible.
3... in progress)
EDIT: Nevermind... nice share!
From Chainfire's note:
It is possible to install a custom busybox over CF-Root v3.0 and newer. However, this is not without risk. CF-Root makes heavy use of scripting, and many CF-Root scripts rely on the internal busybox version. If you do install a seperate busybox version (always use "stericson" installer!), install it to /system/xbin. Installing it to /system/bin will mess things up for sure. Even if you do that part right, it may still break CF-Root, so make sure to make a backup before trying.
Click to expand...
Click to collapse
Higher version or even same version but compiled by different person (so could be have different applet compiled in) not always good for CF-Root. For an example, busybox without sh applet will break CF-Root including some user space applications.
I hit clear memory in task manager and started laughing when it showed 84 mb used, hahaha. Generally good in multitasking.
consegregate said:
I hit clear memory in task manager and started laughing when it showed 84 mb used, hahaha. Generally good in multitasking.
Click to expand...
Click to collapse
I have 125 only.
installed....good....seen a change in ram usage...less ram being used
During installation the script I saw a message that applies a patch to prevent the closure of the launcher. If I clear the memory in the task manager launcher is unloaded from memory. Or script does not work, or ... script does not work).
[SCRIPT] No-lag solution to CM7/9 "low memory" notifications (STEP BY STEP,FIXED TB)
23/01/12 - Now with Titanium Backup support!
The Titanium Backup team is awesome. I contacted them and within 3 days they had a working fix. To make sure that titanium backup works properly all you need to do is download the latest version from the market, go into 'preferences' and select 'follow all symbolic links' in the 'Troubleshooting' section at the bottom. That's it. Now you'll be able to backup normally and then restore your apps in any other rom. Neat!
Click to expand...
Click to collapse
Okay, I've found a rather excellent solution to the low storage problem that plagues the CM7 and CM9 roms - without causing the lagginess of the ".nodatadata" approach. It's not my work but was posted by drefnel on the Cyanogenmod forum. It's very smart: instead of moving the whole of /datadata (fast yaffs2) to /data (slower ext4) and so introducing lag it keeps most apps' non-performance critical data on /data and moves performance critical sqlite databases and xml preference files to the fast /datadata.
Installing this fix is a two step process:
Phase 1 - some prep, takes around 10 minutes to complete. Only has to be done once.
Phase 2 - running the script whenever you've installed new apps and used them once or twice. this just involves hitting a shortcut on your home screen. boom!
The original guide can be found here we need to make a few alterations and I've done a step-by-step below:
Step by step guide
I take no responsibility if using these instructions messes up your phone. They worked for me and you should always be able to restore using the clockworkmod backup. But you can't say you haven't been warned.
Make sure you're running CM7 or TeamHacksung's CM9 or Onecosmic ICS.
This will NOT work on encrypted phones.
DO A NANDROID BACKUP BEFORE YOU BEGIN.
Phase 1 - (if you've already used the ".nodatadata" method then start at step 4)
1. Download Terminal Emulator
2. Open terminal emulator and then enter each of the following followed by return:
su
touch /datadata/.nodatadata
3. Reboot (this might take a while as the OS will be making changes to your filesystem).
4. Open terminal emulator and then enter each of the following followed by return:
su
rm /data/data/.nodatadata
5. Reboot into recovery, go to "mounts & storage" and then select "format datadata". Reboot normally.
6. Go to the market and download GScript Lite. Open it and close it again - this should create a folder called "gscript" in your sdcard. Unzip the file attached in this post and place the script in it in that folder.
7. Open up GScript Lite, press menu and add script. Click load file, select the script file, make sure that "needs SU" is selected and click save.
8. Run the script by tapping it. You should see GScript report its progress and finally the script should finish. Press close and gscript will crash out (can't have it all ).
Phase 2
Add a shortcut to this script on your desktop.
CM7 - long-press and hold a blank area of your home screen, select 'add shortcut', and then select 'gscript lite'. select the script you've just added.
CM9 - go into your app drawer, select the 'widgets' tab, find 'gscript lite', press and hold it and move it onto your home screen. select the script you've just added.
You should use the shortcut after you've installed new apps and used them a few times. There's no harm in not using the script for a while, all that will happen is that app may become a bit laggy until you use the script to move its data to /datadata.
That's it. Congratualtions!
You can flash new CM roms and the script will carry on working fine, but if you wipe data in recovery then you'll have to start from the beginning
You won't be able to easily go back to the original configuration or use the ".nodatadata" method (you'll need to Titanium Backup, wipe everything and then restore), but you'll never miss them.
Good luck
I hope this helps people out. We should find a way of better automating the steps to make it more noob friendly and maybe Team Hacksung and One Cosmic could incorporate it into their ROMs. (Essentially the script needs to be run periodically to make sure that the performance critical /data/data elements of new apps are copied across to /datadata - apart from that it's not too different from the ".nodatadata" approach).
Personally using the much simpler .nodatadata approach, i found that after a rom (cm9) install, most lag goes away after using it for a few hours, although I have heard the speed of the flash memory is not equal on all devices... so could be laggy for some regardles of usage.
Yup I've tried both and the script approach is definitely much quicker in my case. I'm going to see if I can simplify this procedure somewhat.
Sorry for being a noob.. I am not sure how to apply the script to my Android device... Should I use Terminal Emulator on my Galaxy S and type the script in there? Would you mind to guide me through the process? Thanks a lot
Now with a step-by-step guide.
Man you are awesome! Thanks for your guide!
Wouldn't it be an idea tu use scriptmanager (free or pro) instead of gscript? it can run scripts on boot.
Maybe later, when the standard kernel for cm9 will support init.d, it can be an init.d script?
And oh, I will put a link to this thread in the wiki, you can edit the wiki yourself also if you ask for acces.
seem like there is no one try on OneCosmic, and im going it a shot!
will report later~
Zatta said:
Wouldn't it be an idea tu use scriptmanager (free or pro) instead of gscript? it can run scripts on boot.
Maybe later, when the standard kernel for cm9 will support init.d, it can be an init.d script?
And oh, I will put a link to this thread in the wiki, you can edit the wiki yourself also if you ask for acces.
Click to expand...
Click to collapse
Good points. The reason I chose GScript was its user friendliness and simplicity. There are define advantages in running this script at boot. (I'd much prefer to have things run automatically before the GUI appears (as in init.d) rather than clog up GUI boottime as Script Manager would require.)
The phenomenal uptime I get with Android means that I don't reboot very often. Ideally we'd want something that monitored the data/data folder and ran the script on the appearance of new folders. I'm not sure how you'd automate that without resorting to Tasker. Maybe init.d is the best we can do when it's supported. In the meantime a GScript shortcut on the desktop that I hit once every couple of days feels like the best option so far!
Sent from my GT-I9000 using XDA App
Code124Y said:
seem like there is no one try on OneCosmic, and im going it a shot!
will report later~
Click to expand...
Click to collapse
Tested on OneCosmic and it working good for all but picture/gallery gone...
what i mean is it scan no photo nor any image on my phone~
using gallery+ giving me the same view(nothing in gallery)
but other then this 2 gallery, im try with quickpic also and yup it show pic~
but i want the original picture gallery from the 4.0.3... any help?
There are more advantages in scriptmanager. You are not bound to a specific location on the scared for example, with gscript it has to be in /sdcsrd/gscript folder. And you can make a widget with this script in it, making it a one-click operation but I believe that is a paid feature (and gscript can do something similar, no?)
On the other hand, it is as you say, a bit more complicated.
Also making it a init.d isn't a full solution. Every update from the ROM will wipe the /system/etc/init.d so the script needs to be reinstalled.
Maybe a cwm-flashable would be needed than, everybody here can flash. In that case also the initial commands could be run during flashing.
Taptalked u see
Zatta said:
...Maybe a cwm-flashable would be needed than, everybody here can flash. In that case also the initial commands could be run during flash
Click to expand...
Click to collapse
Yup, a flashable zip which runs initial commands and then appends on an init.d script seems like the way to go. Once the CM9 kernel supports I'll learn how to make these (essentially lazy, me)
BTW, making a one click operation from GScript is easy. Just add the GScript shortcut to your home screen and it will prompt you which script you want to run on click (remember that shortcuts are now grouped with widgets in ICS)
Sent by airmail.
Code124Y said:
Tested on OneCosmic and it working good for all but picture/gallery gone...
what i mean is it scan no photo nor any image on my phone~
using gallery+ giving me the same view(nothing in gallery)
but other then this 2 gallery, im try with quickpic also and yup it show pic~
but i want the original picture gallery from the 4.0.3... any help?
Click to expand...
Click to collapse
Have you tried clearing the data for the gallery app? Worth a shot.
Sent by airmail.
revthanki said:
Have you tried clearing the data for the gallery app? Worth a shot.
Sent by airmail.
Click to expand...
Click to collapse
not needed already, becoz reboot seem to be fixed...
Samsung galaxy S GT-I9000 miui.us latest rom
I just have a question popped up in my mind, after applying this script,when I update my teamhacksung ROM in the future(i.e the future build15), will it causes any problem / break my phone?
leolee0209 said:
I just have a question popped up in my mind, after applying this script,when I update my teamhacksung ROM in the future(i.e the future build15), will it causes any problem / break my phone?
Click to expand...
Click to collapse
Absolutely shouldn't, as long as pawitp doesn't ask you to wipe data. If he does then you'll have to start again
Flash away!
Sent by airmail.
People, beware that this will break your TitaniumBackup, I was tested myself
Funnnny said:
People, beware that this will break your TitaniumBackup, I was tested myself
Click to expand...
Click to collapse
How do you mean? A bit more detail please. It really shouldn't, as Titanium Backup does respect symbolic links...
Sent by carrier pigeon.
mispost
10 char
Originally Posted by Funnnny<br />
People, beware that this will break your TitaniumBackup, I was tested myself
Click to expand...
Click to collapse
<br />
<br />
How do you mean? A bit more detail please. It really shouldn't, as Titanium Backup does respect symbolic links...<br />
<br />
<br />
Sent by carrier pigeon.
Click to expand...
Click to collapse
When I backup, wipe and restore, titaniumbackup just restore the symlink, not the actual data
Sent from my GT-I9000 using Tapatalk
Hi guys..
I just want to say thanks to the cm team for bringing ics to our touchpads. None of the work in this rom is my own.. I have just used the great tutorials and stuff I've picked up before to compile this. All credit to everyone who put work into this!
This rom includes cherry-picks from http://review.cyanogenmod.com such as the fixes below
A wifi fix -- review.cyanogenmod.com (Although some people are reporting wifi issues still. I recommend a full wipe)
I have also compiled my own kernel into this.. which I set the default CPU speed to 1.5ghz and the default governor to ondemand. I also added HAVS support. Although I don't know if we really need it on a tab. Maybe it will help slightly with battery life?
These are settings that I like and normally run. So don't flame me!
I am looking for pointers too.. for what to do next. I would like to add the webOS style recent apps mod next. Also ROMControl would be nice from here .. some pointers on how to include would be helpful. Any help greatly appreciated
So.. please remember.. I made this for myself... to teach me something.. someone just said I should post it!All credit goes to the people that contribute to cyanogenmod.
Cheers and enjoy
Buy me a beer if your a fan! Hit donate!
IN THIS BUILD
0.9.4 --- UPLOADING AS WE SPEAK!! Check back in an hour
Hopefully now has Goo.im app support for ease of updates
Not much else (synced 11/04)
managed to put this quick one together in the midst of everything.. so not had much chance to test. let me know how it is.
DOWNLOADS
http://goo-inside.me/devs/philicibine/ Thanks for hosting! Loving the download numbers here guys .. thanks for the support
http://www.cherrykang.mythreed.com/CherryKANG/ Big thanks to @Jedipottsy for this one.
Thanks for all the support from everyone!
Gapps are not included
My antutu benchmarks have been over 6000 btw
Hit the thanks button!
Previous Builds
0.9.3
Now with 4.0.4 inside!!
New Cyanogenmod boot animation!! I left this in coz it looks cooool
Min CPU clock is 384 (No more SoD's!)
Synced 31/03
Lots of new commits so YOU MUST FLASH GAPPS AGAIN!
0.9.2
Min CPU clock is 245 now.
Synced 10/03
Lots of new commits so YOU MUST FLASH GAPPS AGAIN!
0.9.1
Synced 08/03
Netflix and YouTube HD FIXED -- Thanks to wtogami for his cherry-pick script.
0.9
Synced 07/03
Now has stylus input merged
unsure if netflix works yet (please test) and.. nope! It doesn't :'-(
CherryKANG-Bricked
AS REQUESTED -- No changes.. just a bricked kernel thanks to show-p1984
0.8.9
At last it works! Lol
Synced 28/02 should have Netflix - edit - doesn't
Wifi fix
120 dpi - see post 2 for market fix
CherryKANG wallpaper - awesome!
0.4.8a
Kernel rebaked into it. should be lots smoother now
0.4.4a
kernel and wifi fixed
nothing else changed just wanted to get back to a working state
0.4.1a
re-done kernel as last build compiled with standard cm kernel
0.4a
Removed 270 degree rotation coz it derped the bootup :-/
Recompiled the kernel and increased min cpu to 245 (sleep issues)
0.3a First CherryKANG named build! lol =D
270 degree rotation
dpi set to 132 (Requires fixed market apk)
wifi scan interval increased
0.2a
Novalauncher - hope its OK?!
Scrolling cache fix - for smoother scrolling in the browser and other apps. (Kanged from aokp github) credits to them
And a pretty tasty boot animation! From MindSplit - thanks!
Hope you likey
REMEMBER ... This is now 120 dpi. You will either need to download LCD Density Pro from the market, or see below for a free alternative!
Posted by Hockey4life0099 thanks!
or you can use the free version (or dpi changer) to modify the dpi back to 160
---------- Post added at 02:15 AM ---------- Previous post was at 02:03 AM ----------
I wrote this. It looks more complicated than it is cause i broke it down step by step. Ignore my cracked out numbering scheme, i didnt feel like shifting all the numbers down when i added more info.
1. If you dont already have it, download es file explorer
1b. go to the application settings and clear the data for the market
1c. download dpi changer and change dpi to 135(dont reboot yet)
2. go into the options on there and check the root explorer option and the mount option
3. download to TP
http://www.sundergaming.com/downloads/tabletmarketdpiunlocked.apk
4. rename the file Vending.apk
5. long press to copy the file (in ES file explorer)
6. click the star in top right corner (favorites)
7. Choose the phone (/)
8. navigate to system/app
9. paste the app
10. find the app in there called marketupdater.apk or something similar and rename it marketupdater.apk.bak
11. reboot
12. see if you can download an app like flash player. If you cant go to next step
12b. get back to system/app and click the Vending.apk and let it install.
You can mess around with the dpi if you want, but also remember that if the text is small, you can change the default text size in the settings.
The issue i encountered with this method is sometimes the fix stops working, but all you need to do to get the apps to download once again is clear your market data in the application settings. It is obviously much easier to download the app mentioned in the op, but this is for the cheapskates. your only other option is download dpi changer and just switch the dpi back to 160. That is painless but you loose out on some app compatibility and some screen real estate. I myself change the dpi to 138 and change the font size to large. Everything seems to be perfect. Best balance out there IMO.
nevertells2 said:
Do not install CM9 over CM7. Some have gotten away with it and others like yourself run into trouble. Do a clean install, that means running ACMEUninstaller. Here are some instructions I created just for an occasion such as this:
Since the release of CM9, it has become abundantly clear to me that one
needs to do a clean install of the rom to avoid all the little
nagging issues that so many folks are reporting. Whether you are
installing for the first time, upgrading from CM7 or installing
an update of CM9, one really needs to do a clean install.
Since the advent of the official CM9 nightlies, installing
the rom and the Gapps files via CWM seems to be much more
reliable. You still need to wipe the cache and Dalvik cache
before you reboot after installing any rom. If you run into
trouble after an install via CWM, then read on.
Those who know how to do it otherwise and are comfortable with that
feel free to deviate from this document.
For first time installers, you can skip this part. First thing
you need to do is a nandroid backup of your current install and
copy it over to your PC for safe keeping. Next you should backup
your apps using either Titanium Backup or My Backup Root. This will
allow you to restore all your apps after you are done with this
update. If the install goes South, you can always restore your
nandroid backup.
For the first time installers, if you have not already prepared
your PC for this project, you need to download the following:
1. ACMEInstaller2
2. ACMEUninstaller
3. Moboot 0.3.5.zip
4. ClockworkMod.zip(CWM)
5. update-cm-9.0.0-RC0-Touchpad-alpha2-fullofbugs.zip
6. UniversalNovacomInstaller.jar
7. The latest Gapps.zip
The ACME files, Moboot, CWM and the Alpha2.zip can all be found
on the OP for Alpha2 at:
http://rootzwiki.com/topic/18843-releasealpha2-cyanogenmod-9-touchpad/
The universal novacom installer and Gapps files can be found by doing a Google
search on the names above and you will find the download page. I found
the novacom installer here:
http://universal-novacom-installer.googlecode.com/files/UniversalNovacomInstaller.jar
You should download the latest Gapps.zip which
the last time I checked at the link below was 20120317:
http://wiki.rootzwiki.com/Google_Apps
First thing, open the run box on your PC and browse to the novacomInstaller
file. This is a Java executable, so treat it just like any .exe file.
However, since it does not end in .exe, when you browse to find it,
you will have to tell the browser to show "All Files." Once it is in
the run box, click on OK and the Novacomd drivers will be installed,
the Palm,inc folder will be created and the novacom.exe will be placed
in that folder. Next if the ACME files you downloaded are zips, unzip
them both into the Palm, Inc folder which you will find in the Program
files folder. If not zipped, copy both into the Palm, Inc folder. Now
your PC is prepared for installing CM9, so everything applies to first
installers and upgraders from this point forward.
First timers boot into WebOS, upgraders can do the same or boot into
your current install of Android. Connect your TouchPad to your PC
with the usb cable and open Windows Explorer on your PC. You should
see either the TouchPad as a drive, or cm_tenderloin if you are already
running a version of CM9. If you have not already created a cminstall
folder on your TouchPad do so now. Also create a folder named ICS
Install.
Next you need to copy Moboot 0.3.5 and ClockworkMod(CWM) into the
cminstall folder on your TouchPad. Now copy the rom.zip and the
Gapps.zip file into the folder you created named ICS Install. It's up
to you which rom and Gapps file you use if you are installing something
different from what is listed above. If you are copying files to the
Touchpad drive, you now need to right click the drive letter and eject
the drive when you are done. If you are copying files to cm_tenderloin,
you can just close Windows Explorer and both of you disconnect the usb cable.
Upgraders, now you need to run ACMEUninstaller and when it is done, your
TouchPad will reboot back into WebOS. Now both of you need to reboot while
holding down up volume to put the TouchPad into WebOS recovery or bootie
mode. You will know you succeeded if you see a large white usb symbol.
Now plug the usb cable back in and you should hear the PC beep indicating
the TouchPad is connected. You will not be able to see the TouchPad in
Windows Explorer, so don't try. On your PC click "RUN" and type in CMD.
This opens the command window. First timers type in the following in the
command window:
cd/ and press enter. You will see C:\
Now type cd program files and press enter. You will see C:\program files
Now type cd Palm, Inc and press enter. You will see C:\ program files\Palm, Inc
Upgraders, your novacom.exe may be in a different folder, so go browse to that folder.
Both of you enter novacom boot mem:// < ACMEInstaller2 in the command window and
hit enter. After a few seconds, you should see what is fondly called the "Double Penguin" on
the Touchpad. When the install is done, the TouchPad will boot to Moboot. Tap
the volume on the TouchPad to stop the 5 second countdown if you see one. Now
select CWM using the Home button, then Install zip file from SD card and use the
volume rocker to move down to the ICS Install folder. Select that and move to the
Alpha2.zip and select that. Start the install. When it is done, use the go back
selection to go back to the main CWM screen and select reboot.
Once Android is booted up(be patient, it takes a couple of minutes the first time),
play around with the browser, set up wifi, just to make sure your install was
successful. Now reboot back to CWM and do the same procedure to install the Gapps.zip
you copied to the ICS Install folder earlier. You're done with a clean install.
Upgraders, you know what to do, first timers, I hope you have friend around to show
you the ropes or you own an Android phone and already know the ropes. Good Luck!
P.S. I strongly suggest you make a nandroid backup of your new installation right now.
First timers, one makes a nandroid backup using CWM. Boot to CWM, select "Backup and
Restore" and select "Backup".
Click to expand...
Click to collapse
Sent from my cm_tenderloin using xda premium
what's the wifi fix ?
This one http://review.cyanogenmod.com/12342
Sent from my cm_tenderloin using xda premium
Does this have Gapps cooked into it?
No sorry... I'm using v11 though
Sent from my cm_tenderloin using xda premium
Ok thanks...
If we have CM7 installed do we do a factory reset/wipe of the caches and then install the zip directly?
dtwconsulting said:
If we have CM7 installed do we do a factory reset/wipe of the caches and then install the zip directly?
Click to expand...
Click to collapse
Yep.. I think so. I think you can also flash without a wipe.. but wouldn't recommend.. and if you do.. flash the latest gapps
Sent from my cm_tenderloin using xda premium
Cheers mate
hi, whats the webOS style recent apps mod you mention in the OP?
Drop Box link already dead
Any one have a mirror?
Thanks!
MatthewYiu said:
Any one have a mirror?
Thanks!
Click to expand...
Click to collapse
Still working for me as of 10:40am. But.... here's a mirror just in case.
http://www.mediafire.com/?q60g82098q1vh16
Gapps v11:
http://goo.gl/u9s8g
For additional related files and mods, see sprice's thread here:
http://forum.xda-developers.com/showthread.php?t=1452324
f_padia said:
hi, whats the webOS style recent apps mod you mention in the OP?
Click to expand...
Click to collapse
When u hold home.. the apps come across the screen horizontally. Looks like the card feature of webOS.
Its in AOKP so I might have a look at their github later.
Sent from my HTC Vision using xda premium
tapout27 said:
Does this have Gapps cooked into it?
Click to expand...
Click to collapse
Read much?
how about hw acceleration?
mercado79 said:
Still working for me as of 10:40am. But.... here's a mirror just in case.
http://www.mediafire.com/?q60g82098q1vh16
Gapps v11:
http://goo.gl/u9s8g
For additional related files and mods, see sprice's thread here:
http://forum.xda-developers.com/showthread.php?t=1452324
Click to expand...
Click to collapse
flashing now! =)
Hello,
is the wifi fix included in the kernel? if so, is it possible to make a only a kernel-package to flash with CWM over the standard CM9-0.6?
Thanks
Not quite sure how to do that just yet. Will look at some other kernels tomorrow
Sent from my cm_tenderloin using xda premium
coolineho said:
how about hw acceleration?
Click to expand...
Click to collapse
This is just a kang. I lack the knowledge to even attempt looking into that!
Its working the same as cm
Sent from my cm_tenderloin using xda premium