Database Users

[Q] Problems with Both Wug's and mskip's Toolkits

Since I can't post on the actual threads yet, due to being a new account, I will be posting here in hopes that someone comes across this and can help me out.
I have done a pretty hefty amount of reading trying to get my Nexus 7 rooted and for some reason I just can't get past the part of installing the necessary drivers for my computer.
Specs:
- Windows 7 32 bit. (Administrator account)
- Nexus 7 32GB (Wifi) running 4.2.1 w/ OEM cable (Also tried a non-OEM cable)
What I have done so far with Wug's Toolkit:
- Step 1
1. Plugged in my device and made sure USB Debugging was enabled. (At this point, the Device Manager recognized a device and tried installing drivers, but failed.) So the first thumbnail is what I have in my device manager from the start. Nexus 7 under "Portable Devices" and "Other Devices."
2. I uninstalled both of the devices.
3. Unplugged my device and used USBDeview to uninstall anything that resembled "Google" or "ADB", etc. like it states.
4. Rebooted my computer.
- Step 2
1. It says that the recommended solution is #3, so naturally, I tried that one first. I followed the steps and installed the Android Composite ADB Interface drivers successfully and it even shows it under "Android Phone" in my device manager, second thumbnail, when my device is plugged in. (USB Debugging enabled)
2. Now, when I click on the "Reboot Bootloader" button on step 6 is where it just hangs with the dialog box "Rebooting your device into bootloader mode..." but my Nexus never reboots or anything. My Task Manager show two "adb.exe" processes and none ever end. I read the thread and some users were having the same problem and they got it to work by ending one of the adb.exe processes. So I have to end one of them and after a while I get a "Checking Fastboot status" then a few seconds later this message box pops up, third thumbnail. It says that Debugging is not necessary for bootloader mode, so I turn off USB Debugging and my computer recognizes a new device. So it successfully installs Android ADB Interface and I try the Reboot Bootloader button again, and it still hangs. Only this time, there is one adb.exe. So I kill it, and after a while I get the same error dialog box as the third thumbnail. Like it states, I am using driver configuration #3, so I will go ahead and close the dialog box and go to step 7.
3. Since my device is already configured, I go to Step 12.
4. I hit the "Reboot Device" button, but nothing happens to my device.
At this point, I decide to try a different driver solution. So I go through the whole process all over again, with Solution 1. Go through and install the drivers, everything goes according to the tutorial. I get to Step 3, and hit "Full Driver Test" and it hangs on "Checking ADB Status". There are two
adb.exe's so I end one of them. I get a dialog box that says ADB device not found.
Finally, I decide to try Solution 2. So I go through the whole process. Yet I still get the same hanging with adb.exe. I even tried different USB ports, but nothing.
Now, with mskip's Toolkit I never get past the "Starting ADB..." message. It just hangs there.
So the problem lies with ADB.exe I'm guessing. I'm tired and I've spent hours just trying to root this thing. Am I SOL? Anyone have anything that I can try out or the same problems?

Have you tried rebooting your PC after installing the drivers? It took me ages to get mine installed and I think a reboot allowed the device to show up and work properly. I thought it would be easy being a nexus device. Turned out to be a right pain in the ass.

Yep.
davidoff59 said:
Have you tried rebooting your PC after installing the drivers? It took me ages to get mine installed and I think a reboot allowed the device to show up and work properly. I thought it would be easy being a nexus device. Turned out to be a right pain in the ass.
Click to expand...
Click to collapse
Hey thanks for the response. Yes I have. I tried rebooting after every driver change. (Uninstalling, re-installing, etc.) My device does show up, almost as if the drivers are working correctly. Though I'm not sure why adb.exe is giving me troubles.

Have you tried 'adb devices' via cmd prompt? I take it your all stock then?

davidoff59 said:
Have you tried 'adb devices' via cmd prompt? I take it your all stock then?
Click to expand...
Click to collapse
No I haven't. Is this what you are talking about? http://forum.xda-developers.com/showthread.php?t=1741395
EDIT: I just tried "adb devices" via command prompt in the Advanced Settings, "Daemon not running, running it now, daemon started successfully." Now it'st just hanging. Two adb.exe processes.
What I was hoping to do was to create a backup of all my apps and data before I mess around with it. Yes, I'm all stock.

Add me on gchat and hit me up. Not sure what you are having problems but I could help you trouble shoot.
{{ WugFresh }}

WugFresh said:
Add me on gchat and hit me up. Not sure what you are having problems but I could help you trouble shoot.
{{ WugFresh }}
Click to expand...
Click to collapse
Thanks for the response, I have e-mailed you.

[Q] USB and recovery problems after OTA upgrade to 4.3

I took the OTA to 4.3 on my Nexus 7. It was previously unlocked and rooted, but had no kernels, etc changed. After the update ran, I lost root as expected, however, in trying to get it back, I've discovered I'm having a couple of other issues.
First, the device is no longer working properly via USB on my PCs. On both my Win 7 and Win 8 PCs, the device won't properly connect to where I can browse files or anything else. On the Win 8 computer, I see a Nexus 7 device in Device manager, but drivers won't install. I downloaded the drivers from the Asus site, but trying to manually install them doesn't work on the Win 7 machine, and on the Win 8 machine, they install but don't seem to be working with the Nexus 7 as it still shows a problem in Device Manager.
The tablet also will not boot into recovery mode. I can power it up into fastboot mode, but if I select "Recovery Mode" and hit the power button, I just got the Android with the red triangle for a few minutes before it boots back into the OS. After doing some searching, I saw where you might need to have it plugged into a PC to get it to go into recovery, but that doesn't work, either (might be tied to the USB problem).
Ideas?

Did you turn on developer options, and USB debugging? Have you tried USB connection type PTP instead of MTP?
If you have the stock recovery, the red triangle and Android are normal. You can bring up a blue options menu by pressing the power and volume up buttons from the red triangle Android.
Sent from my rooted Nexus 7 @ 49.4 mpg

exglynco said:
Did you turn on developer options, and USB debugging?
Sent from my rooted Nexus 7 @ 49.4 mpg
Click to expand...
Click to collapse
Yes.

Try another driver source. Wugfresh's installation is a lot tougher than Skipsoft's, but try the other guy 's system.
Sent from my rooted Nexus 7 @ 49.4 mpg

exglynco said:
Try another driver source. Wugfresh's installation is a lot tougher than Skipsoft's, but try the other guy 's system.
Sent from my rooted Nexus 7 @ 49.4 mpg
Click to expand...
Click to collapse
I was using the stock drivers off the Asus page. I'll look around for the two you mention. I assume they're posted on here somewhere.

And about the recovery just try flashing another recovery from fastboot
Code:
fastboot flash recovery recovery.img
Sent from my Nexus 7

Red Devil said:
And about the recovery just try flashing another recovery from fastboot
Code:
fastboot flash recovery recovery.img
Sent from my Nexus 7
Click to expand...
Click to collapse
Without USB access? That's my dilemma.

OK, I'm getting closer. I got TWRP installed and rerooted it. I had to do the "Revoke USB debugging authorizations" on the Dev Options screen. Then it would work via ADB.
Still not browsing files yet on my desktop, but at least I know I'm talking to it. So now I'll play with the driver installation a bit.
EDIT: Well, drivers reinstalled for about the 4th time, and it's still not allowing me to browse files from my desktop. Galaxy S4 works fine as soon as I plug it in, even if I also uninstall it's drivers. Ideas? I obviously have it working over USB because I can give it commands and reboot it via the PC.

OK, try this one. Plug in your tablet to pc, go to hardware manager, find your Android Device then choose Uninstall (choose Remove all drivers for this device), unplug and plug in your tablet again. Your Windows should discover few new devices (mine has discovered three) and download drivers for them then you should see Android ADB Interface in Android Devices and Nexus 7 in Mobile Devices.
--edit--
I've solved my issue
http://forum.xda-developers.com/showthread.php?p=44322739#post44322739

Already been done that road multiple times.

have the same problem except one thing: no one 3 computers don`t detect my nexus. have no reaction in device manager, on connection nexus as mtp/debug/fastboot. Only usb-otg works.

xxut said:
have the same problem except one thing: no one 3 computers don`t detect my nexus. have no reaction in device manager, on connection nexus as mtp/debug/fastboot. Only usb-otg works.
Click to expand...
Click to collapse
After you plug your nexus in have you unlocked the screen to see if it is asking you to authorize the tablet?
What other steps have you taken? Have you installed proper drivers? Have you manually chosen to update drivers with the sdk drivers if in device manager is showing the nexus? Have you tried the drivers from Asus?
Sent from my Nexus 7 using Tapatalk 4 Beta

SlowCobra96 said:
After you plug your nexus in have you unlocked the screen to see if it is asking you to authorize the tablet?
What other steps have you taken? Have you installed proper drivers? Have you manually chosen to update drivers with the sdk drivers if in device manager is showing the nexus? Have you tried the drivers from Asus?
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I personally did all of those things. After having the Nexus "forget" all the other PC authorizations on the dev screen, I finally got it to accept ADB commands, just not to properly install drivers that would allow me to browse files like it had done on 4.2.

SlowCobra96 said:
After you plug your nexus in have you unlocked the screen to see if it is asking you to authorize the tablet?
What other steps have you taken? Have you installed proper drivers? Have you manually chosen to update drivers with the sdk drivers if in device manager is showing the nexus? Have you tried the drivers from Asus?
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Nexus doesn`t appears in device manager. At all. It starts to charage, but no reaction in device manager, no any reaction(except charging) at nexus. On computer it looks like i didn`t connect anything. I`ve trying to intall drivers as legasy hardware, but nothing changes. Sorry for my english.

xxut said:
Nexus doesn`t appears in device manager. At all. It starts to charage, but no reaction in device manager, no any reaction(except charging) at nexus. On computer it looks like i didn`t connect anything. I`ve trying to intall drivers as legasy hardware, but nothing changes. Sorry for my english.
Click to expand...
Click to collapse
Try turning off usb debugging. My tablet cannot connect to pc but with usb debugging off it at least recognises tablet as a media device and this enables me to view its files
.but still the problem of not being able to root

Unlocking bootloader issue

I finally got my Nexus 7 (2013) driver loaded after many issues. Following the directions on the video for unlocking, after typing the "fastboot oem unlock" command in command prompt, I get a waiting on device message. Please help!!

You can always go on www.wugfresh.com, find it on Google. For some reason yesterday I would type that in and get a Internal 500 error. Go to his website and download his nexus root toolkit. Make sure you have the proper drivers installed. In the Nexus root toolkit there is a section at the top of the program which guides you through obtaining the correct drivers.
Also make sure you've clicked the version 7 or 8 times to "become a developer". When connected make sure you have use debugging on, and the tablet is not in MTP mode. I just unlocked and rooted my tablet yesterday. Good luck!
Sent from my SCH-I535 using xda app-developers app

[Q] Wugs Nexus Root Toolkit stuck on "ADB Device Not Found"

Hi,
I tried a lot of other rooting applications and have had no luck with any of them. Then I found Wug's Nexus Root Toolkit. It works for my Nexus 4 (Jelly Bean 4.3) - until I came to the "Full Driver Configuration Guide" - where it gives a message: "ADB device was not found".
I have tried it over several times to no avail. Can anyone offer any clues as to what may be causing this?
btw, I am running the Wug's Nexus Root Toolkit v1.7.2 on Windows 8.
Thank you,
David

I was just having the same problem, and I realized after a while that I was making the STUPID mistake of not noticing that my phone was asking me to confirm USB debugging when the toolkit started searching for ADB devices. If you're as big of a dummy as I am (or just having an off day), this may be your problem

aaronwebstey said:
I was just having the same problem, and I realized after a while that I was making the STUPID mistake of not noticing that my phone was asking me to confirm USB debugging when the toolkit started searching for ADB devices. If you're as big of a dummy as I am (or just having an off day), this may be your problem
Click to expand...
Click to collapse
I am having the same problem. Where/how does the phone ask you to confirm USB debugging? It asks me when I turn it on, but not again later.
I have tried 3 or 4 different drivers, but, although the device is recognised by Windows 8, it is not recognised by Root Toolkit.

.... toolkits are the the devil...
They promote not learning what you're doing or what's actually happening in your devices so... there's posts like this.
please read this thread before touching your device

studacris said:
.... toolkits are the the devil...
They promote not learning what you're doing or what's actually happening in your devices so... there's posts like this.
please read this thread before touching your device
Click to expand...
Click to collapse
I'm not quite sure how this was supposed to help. My problem is that the ADB drivers do not seem to work on my computer. I have just tried installing the Android SDK (which comes with its own ADB drivers), having first uninstalled all the existing drivers. It did not help.
Not entirely sure where to go from here.

PDAnet's drivers may work. Simply install PDAnet (after uninstalling any previous attempted driver installations) to get the drivers.

studacris said:
PDAnet's drivers may work. Simply install PDAnet (after uninstalling any previous attempted driver installations) to get the drivers.
Click to expand...
Click to collapse
I had installed PDANet from within Root Toolkit, and it didn't work. Just now, I uninstalled everything again, and installed PDANet from their web site. Still get no ADB device in Root Toolkit. [NB I didn't have PDANet on the phone, but it seems to be there now]
I tried running adb from the android SDK, and it says "error: device not found".
However, I noted there was an adb prompt on the phone when I first plugged it in, this time (which I told to always accept).
[Later]
Wierd - it is now a bit further on. This is what I did:
Started PDANet on the phone, and enabled USB tethering.
Started PDANet on the computer, and it connected to the phone. At this point the USB debugging permission thing came up again, and I accepted it (also ticking the box to always accept).
Unticked USB tethering on the phone again.
Stopped PDANet on the computer (right click on icon, exit).
Tried the Root Toolkit again (pressed Root button), it connected to the device, and put it into fastboot mode.
The boot loader appeared on the phone, and the computer said "Checking Fastboot Status".
It seemed to stay like that for ever.
Killed the root toolkit. and tried again.
Left the computer for a while, and when I came back, it had completed.
So, it seems to be working now.

And when you try using fastboot directly instead of the toolkit....... what happens?

changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Gesendet von meinem Nexus 4 mit Tapatalk 4

studacris said:
And when you try using fastboot directly instead of the toolkit....... what happens?
Click to expand...
Click to collapse
I type "fastboot reboot" at the command prompt.
It replies "< waiting for device >"
I wait a few minutes.
Then I press ^C and the command prompt returns.
P.S. Changing the USB connection to camera doesn't make any difference to the above.

Best idea i didnt notice too
aaronwebstey said:
I was just having the same problem, and I realized after a while that I was making the STUPID mistake of not noticing that my phone was asking me to confirm USB debugging when the toolkit started searching for ADB devices. If you're as big of a dummy as I am (or just having an off day), this may be your problem
Click to expand...
Click to collapse
Thanx !!!!!!!

cmajetic said:
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Gesendet von meinem Nexus 4 mit Tapatalk 4
Click to expand...
Click to collapse
Thank you so much! This solved it for me :good:

nikkilocke said:
I type "fastboot reboot" at the command prompt.
It replies "< waiting for device >"
I wait a few minutes.
Then I press ^C and the command prompt returns.
P.S. Changing the USB connection to camera doesn't make any difference to the above.
Click to expand...
Click to collapse
I got stuck the same way.
The way to got around was to change connection to camera -> the PC is intalling some drivers,
then turn off the USB debugging -> the PC is again installing some drivers,
then turn on the USB debugging -> "bingo" adb mode recognized by the toolkit
Now I can install and enjoy Kikat 4.4.1 :good:

cmajetic said:
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Click to expand...
Click to collapse
I found the same solution, changing over from MTP to CAMERA suddenly had the toolkit recognise the phone and could boot it to unlock then root it... Previously, I had installed PDA drivers...
I am astonished how PATHETIC nexus phones/tablets are at simply connecting to a PC. I am baffled at the attempt by google to make their devices as UN-plug & play friendly as possible... bizarre! I have a N10, N7 and have had two N5's and all have the same PITA random disability....
grrr...
Mark.

So the Nexus toolkit is able to see the Nexus 7 as a media device but not Windows ?
marcelin99 said:
I got stuck the same way.
The way to got around was to change connection to camera -> the PC is intalling some drivers,
then turn off the USB debugging -> the PC is again installing some drivers,
then turn on the USB debugging -> "bingo" adb mode recognized by the toolkit
Now I can install and enjoy Kikat 4.4.1 :good:
Click to expand...
Click to collapse
So the Nexus 7 toolkit is able to see the Nexus 7 as media device with this method, but not Windows ? That's strange because Windows is supposed to see your files within the Nexus via Mtp mode. Is it that google removed the ability for Windows to be able to see Nexus 7 files in Android kit kat 4.4.2. What should I do then if I simply want to view files inside Nexus as a non root user ? B.T.W I'm currently on stock kitkat 4.4.2 build KOT49H. Therefore, I'd gladly appreciate it if anyone out there would answer this question and thanks in advance. Feel free to PM me on this so we can "talk" about this. : )

cmajetic said:
changing MTP to camera in USB connection mode did it for me...with MTP it showed correctly in device manager but the toolkit didn't recognise it
Gesendet von meinem Nexus 4 mit Tapatalk 4
Click to expand...
Click to collapse
Success.

Well, mtp connection works perfectly fine in my Windows 7 machine. But on my xp machine I could never get it to work no matter what driver combination I used.
I can see the reason they changed to mtp but I found mass storage to be much more user friendly.
Sent from my Nexus 4 using XDA Free mobile app

as others, I was using WUG kit to get back to stock. I was stuck without USB degugging options. Installing PDAnet did the trick, installing drivers so that I was able to get WUG working. I am now stock. All traces on my tinkering are gone. Later this week I will upgrade to a Galaxy Mega and trade in my Galaxy Nexus that I have loved for 3 plus years.

Stuck on fastboot screen
GranPaSmurf said:
as others, I was using WUG kit to get back to stock. I was stuck without USB degugging options. Installing PDAnet did the trick, installing drivers so that I was able to get WUG working. I am now stock. All traces on my tinkering are gone. Later this week I will upgrade to a Galaxy Mega and trade in my Galaxy Nexus that I have loved for 3 plus years.
Click to expand...
Click to collapse
Hi
Happy New Year to all! unfortunately I am left with the unusable nexus 7 that happened last night.
I was going crazy with the lags with lollipop and was waiting for the 5.0.5 update OTA but the delay was making me go crazy so I decided to take the risk of manually flashing the image using ADB and SDK.
Like many others pointed, I knew how to enable my computer to see my device by switching from MTP to PTP mode from my earlier rooting experience with Samsung, HTC and others. So that was not an issue for me.
I was following a tutorial from androidcentral and half way through I went to check a tutorial on youtube which I think caused the disaster. After I executed the adb devices no devices were detected and like I said I went and changed the MTP mode to off and bingo now my device was detected.
I executed device unlock and currently my device is in unlocked bootloaded state which is displayed in the fastboot screen where I am stuck now. Following the youtube instead of flashing each separately bootloader first and then the factory image I jumped to 'flash-all.bat' command...I saw something say on my command prompt on pc that completed in so many seconds or minutes which led me to get anxious and since no rebooting happened on the device I went and manually tried to press the power button.
From that time I am stuck on the fastboot screen. I can cycle through 'power off', restart booloader, recovery mode and start. But when I select 'restart bootloader' it comes to 'start' in the same mode and when I select that I can see a tiny 'Booting failed' in white letters in tiny fonts on the top left side of the 'Start'. I cannot go past this state.
Since I know the last time I had enabled 'usb debugging' and MTP off before everything went wrong I am presuming those states are still intact. I can see status on 'reboot bootloader' screen that my bootloader is unlocked.
Now, when I try to go through the process again my device is seen in device manager but when I send 'adb devices' command it cannot detect any devices. If my device is usable I can atleast go into settings to see if my MTP state and usb debugging status. Now I don't have that option. I even tried the Nexus Root Toolkit - everything is fine but until it tests the driver to finally say 'ADB device not found'.
After browsing so many posts I spotted there were some posts that said there is some discrepancy between the device id as listed by the driver to what actually is usb.inf, which all is too technical and overboard for me. And finally left me thinking that it is some issue of Windows PC as someone pointed that the ADB device was detected on a MAC. So I am now thinking to give it a shot in a mac machine as a final attempt to recover my device.
Anyone please suggest a solution, apologies if this is covered by someone elsewhere in the forum if so please point me there. I will make sure that from next time I will never do a manual flash of factory image.
please help!

It sounds like you are on top of it, but haven't hit the right combination yet. Thanks for the quote and I am sorry I am unable to offer any help. As mentioned in my post, I have switched to the Galaxy Mega and was pleasantly surprised by the OTA upgrade to 4.4. Now I am trying to figure out how to root it.

Bricked & Unseen...

Ok, here goes my story.
Just a week ago from the date this was posted, I decided to update my recovery (TWRP) through ROM Installer. Surprisingly, I didn't see TWRP at all in the "Recoveries" section of the application. Stock, ClockworkMod Touch, regular Clockworkmod (no touch), and unofficial Clockworkmod were available - from what I can remember. I decided to use Clockworkmod (no touch) to install Paranoid Android. Coming from OmniROM, I factory reset and flashed the .zip.
Flashing ended in error with Status 7. A while before I had used ClockworkMod Touch to try another ROM and had no such issue. I ignored the error and restarted my tablet hoping that it would still boot fine. It rebooted, gave me the Google logo for about 5-10 seconds and automatically rebooted into recovery.
I saw a bypass for Status 7. Removing some lines from the updater-script was the solution. Having no access to my Nexus 7 storage, this bypass is unusable
I tried flashing a new recovery using flashboot fastboot. After verifying that I had my drivers installed (Universal ADB by Koush), I opened up adb in the command line (Windows) as an administrator. I could not see my device. I tried the drivers from Asus, multiple USB 2.0 ports, and a different USB cord, but same results. I tried on a different computer. Still no detection.
Systems used: Windows 8.1, Windows 7 (x64), Windows 7 (x86)
I tried using Wug's Toolkit and used Flash Stock + Unroot, since it didn't need USB Debugging enabled. Same results...
I also tried plugging in another Android phone (LG Optimus Dynamic II) to see if Windows would recognize it. Windows recognized it, installed drivers automatically, and was recognized in ADB immediately. This practically unknown phone (XDA doesn't have a section for it yet) could be recognized, but my world famous Nexus 7 2012 can't be seen.
I have absolutely no idea of what to do now...

Are you on the bootloader screen when trying to use fastboot?

PrizmaticSmoke said:
Are you on the bootloader screen when trying to use fastboot?
Click to expand...
Click to collapse
Yes. Every time I use fastboot, I am in the bootloader.
I'm not new to this at all, so say whatever you need to ^^
The main problem is my PC not recognizing my Nexus 7 through adb. Again, I have used multiple cables with no success.
The computer I am using for this runs Windows 7 x64. I have only tried using USB 2.0 ports to connect my tablet.
Thank you!

Might try deleting the drivers and starting over. I had some issues with adb drivers for both the N7 and the kindle fire on windows 7 as well, but eventually got both working by doing this several times.
I'm assuming you ticked the option for softbricked when trying the flash stock option? If not try again and check that option.
This thread http://forum.xda-developers.com/showthread.php?t=1907796 has a section on driver installation with good info and links too.
Hope that helps. Best of luck man, getting the adb drivers working properly seems to be finicky sometimes in my experience, and i'm no stranger to PC and software troubleshooting either.

PrizmaticSmoke said:
Might try deleting the drivers and starting over. I had some issues with adb drivers for both the N7 and the kindle fire on windows 7 as well, but eventually got both working by doing this several times.
I'm assuming you ticked the option for softbricked when trying the flash stock option? If not try again and check that option.
This thread http://forum.xda-developers.com/showthread.php?t=1907796 has a section on driver installation with good info and links too.
Hope that helps. Best of luck man, getting the adb drivers working properly seems to be finicky sometimes in my experience, and i'm no stranger to PC and software troubleshooting either.
Click to expand...
Click to collapse
Thank you so much for all of this! I'll need all the luck I can get...
By the way, I checked that softbrick option ^^!