Related
The material is made of TPU. Last time I used a TPU case it felt like silicone but with more rigidity. Is the official Asus Travel Cover the same? What does the material feel like? Is it soft like rubber or cold and rigid like hard plastic? Does it feel like it's as cushiony as silicone?
Tubular said:
The material is made of TPU. Last time I used a TPU case it felt like silicone but with more rigidity. Is the official Asus Travel Cover the same? What does the material feel like? Is it soft like rubber or cold and rigid like hard plastic? Does it feel like it's as cushiony as silicone?
Click to expand...
Click to collapse
It's not cold, and not as soft as silicone (I have on my phone, i.e.). I really like it, it is nice to the touch and doesn't slip when you hold it (but silicone holds better).
dalanik said:
It's not cold, and not as soft as silicone (I have on my phone, i.e.). I really like it, it is nice to the touch and doesn't slip when you hold it (but silicone holds better).
Click to expand...
Click to collapse
This. Same for me.
Sent from my Nexus 7 using xda app-developers app
But it has no magnets to be fixed when it is closed, right?
And if you open it, can you open it so wide that it can touch the back? Thanks
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
But it has no magnets to be fixed when it is closed, right?
And if you open it, can you open it so wide that it can touch the back? Thanks
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
It has a pretty rubbery feel and yes, it can be folded all the way to the back . I got the baby blue color but am now having post purchase regret.. Should have gone for the bright orange which will look so nice contrasting with the black tablet! Haha
Thanks for the responses guys.
How flexible is it compared to silicone? Does it have a shiny finish or did they rough it up so it has a matte finish inside and out? I'm trying to determine what it would feel like in the hand as TPU alone doesn't really tell me what the finish is. I've seen TPU cases that look glossy and some that look matte. Does it kind of feel matte and smooth like a mouse ball? I know it's probably not going to feel as smooth as silicone but it't not going to grip as much either which I kind of like it having less grip. I might have to get this case.
What about the thickness? How thick is it? 2mm? Like if you look through the speaker cutout you can see how thick it is right?
But it has no magnets to be fixed when it is closed, right?
Click to expand...
Click to collapse
Nope. This much I do know, it has no magnets which from what I'm reading is kind of a bummer to everyone because:
A) It can keep the cover closed when you put it in a bag or something.
B) It can utilize the magnetometer to do cool things like put it to sleep and turn it on depending on the cover like a smart cover.
Should have gone for the bright orange which will look so nice contrasting with the black tablet!
Click to expand...
Click to collapse
I'm torn between the whitish color and the dark gray. Probably end up going with the whitish but the gray just looks more professional. I pretty much only want the official case because it has the Nexus 7 branding and dimples all over it.
EDIT: Oh and I heard people complain about the power and volume buttons. They said they couldn't feel them. I feel them less with a silicone case on, but I still feel them. Is it true that you can't feel how much pressure you're putting on them? I don't want to be overpressing the buttons. Since it's a more rigid material I would say there seems like some truth to this?
It has a matte finish. Dull. At least the gray one does. It's the thinnest case for the N7 I believe. A little thicker than a tpu phone case. Very soft feel to it a little grippier than the stock back but not sticky at all.
Sent from my SCH-I535 using xda premium
Lol why would you like the dimples on this case? I like the Nexus branding on the back of this case but certainly not the tiny holes spreaded throughout the case.
And yes I couldn't really feel the physical buttons when pressing. I mean I could feel them but pressing them a little bit seems to activate the buttons already.
I think the dark gray case looks nice too but a vibrant color like bright orange won't hurt too. Haha
Hi,
I'm looking at various cases for the Nexus 4, and wondering what everyone thinks of them.
I've never used a case for any of my phones before, and I've never really minded the scratches, nor have I gotten any cracked screens despite dropping my phones dozens of times. However, the Nexus 4's glass surfaces have got me thinking perhaps it's a good idea to get some protection.
I'm primarily protecting against scratches, and the occasional drop. I'd like the thinnest and most non intrusive case possible, and one with some grip so the phone doesn't fall so easily.
So far, my choices seem to be Nillkin, Rearth, Poetic and Diztronic. I'm leaning more towards hard cases than soft TPU cases due to aesthetics.
Any pros and cons for the above?
Thanks!
This is exactly what we need, there doesn't seem to be much comparision between tpu and hardcases.
How does the S-Line case compare to others say as it's only around £3 which is dirt cheap but is it crap and wouldn't protect my Nexus at all (If it actually arrived that is )
I'm definitely curious to the difference between soft and hard cases. In my experience some hardcases are damaging the phone a little...
DutchDisturbed said:
I'm definitely curious to the difference between soft and hard cases. In my experience some hardcases are damaging the phone a little...
Click to expand...
Click to collapse
UPDATED 2013-06-07
OK. Let me try since I've tried 9 cases and I'm not 100% happy with any of them. I was spoiled by the Galaxy Nexus Ringke Slim case. Super Slim, all edge protection in a drop and super grippy. Nothing I've tried for the N4 yet has given me the same satisfaction.
These are in the order that I purchased them.
1. S-Line (TPU)
Like: Cheapest of the bunch. The soft rubber gives the most grip of all the cases I have.
Don't Like: IMO it looks ghetto. Poor molding so there are sharp edges everywhere. I guess you could trim this but it already looks like a hack job. The buttons are covered and are difficult to push.
Overall: I tried this for 5 seconds and then tore it off. Garbage.
2. Rearth Ringke Slim (hard case) - MY CURRENT CASE.
Like: Slimmest of all of the case I have. Super tight fit. Looks awesome. Buttons are exposed and are fairly easy to reach. If you want slim, this is a nice case. Judging from the photos I've seen of the Diztronic slim equivalent, it also gives better corner coverage.
Don't Like: Rearth changed the material and design from the Galaxy Nexus which was my favourite case. The material isn't as grippy and offers no protection in a drop to the front/top and front/bottom. The Gnex version was way better as it totally covered the top/bottom front and was super grippy....so I'm super disappointed in the N4 version.
Overall: Even with the negatives I mentioned, I keep coming back to this case for my daily use. It's the best blend of looks, feel (big time) and protection for slim case.
3. Poetic Bumper (Bumper)
Like: Great fit. Looks way better in person compared to photos. Buttons are covered but are very easy to push (this is a big deal for me). Get to see the N4 backing. Good drop protection because all sides are covered. Easy to remove. Of all the cases, this case gives me the most confidence NOT sliding on a slanted surface.
Don't Like: Makes the phone feel wide. There's no backing so it's not as comfortable to hold compared to a case with a backing. This isn't something no one seems to talk about...it just feels odd. Makes one-hand operation tough.
Note: The back of the phone is exposed so you may want to put a rear screen protector or vinyl (i.e. DBrand). I rocked a DBrand vinyl rear cover for a while with this bumper and really liked it. Great way to customize the look of your phone and you're not constantly cleaning the N4's glass back.
UPDATE:. I've realized I don't like bumpers. The feeling of the recessed back kills it for me. This bumper/vinyl combo is excellent for protection, button feedback and looks....but the recessed back is a deal breaker for me. Just a personal preference.
4. Diztronic (TPU)
Like: Feels great in the hand. Solid. Probably my fav in terms of feeling. Great build quality. Confidence in a drop situation. Looks great.
Don't Like: Suffers from the same problem as the Rearth hard case. Material isn't grippy. Feel like it's going to slide off a slanted surface. Buttons are covered and because the rubber is stiff, it's hard to push and there's very little feedback. The lip that surrounds the screen is pretty pronounced... occasionally get's in the way of swiping. Not as bad as the Mercury though.
Overall: Although it has some negatives it the best of the TPUs I've tried.
UPDATE: After reading some other posts on the topic, I used an Exacto blade to put little slits along the edges of the molded buttons and it made a huge difference in button feedback. I really like the case now. This is my "rough activity" case.
5. Official Nexus 4 bumper (Biggest mistake purchase)
Like: Looks cool. Best button feedback (feels like the original button). Good drop protection as all sides are covered.
Dislike: Widest case on the list. The hard plastic sides make it slippery and uncomfortable. Port/mic holes are smaller than the Poetic. The back plastic edge is dimpled which a) is uncomfortable and b) makes it slippery on a surface (or more so than the Poetic). The USB port hole is deep so you need a skinny USB cable end. Oh ya, and the price is ridiculous. After shipping and taxes it was $33.
Note: Like the Poetic bumper the back of the phone is exposed so you may want to put a rear screen protector or vinyl (i.e. DBrand)
Overall: This was my biggest waste of money of all the cases. Far to expensive for what you get. Get the poetic.
6. Meifeng Hard Skin Cover Case (Hard case)
Like: Great feeling. It's a hard case but the coating on it makes it feel squishy. Grip feeling is excellent. Button and port openings are excellent...better button openings than the Ringke Slim. Although I've only had this one for 30 minutes it doesn't appear to be a fingerprint magnet like the Ringke is. Wow. I really like this case. Inexpensive too...$7.
Dislike: Like the Ringke Slim the top/bottom front edges are totally exposed so no protection on those edges. Corners are covered but not as much as the Ringke Slim.
Overall: Want a slim case that feels good that protects the sides and back, this is the case. I'll post some pics in this thread.
eBay Link
7. Rearth Hybrid
I'm a huge fan of Rearth because of my previous purchases. Unfortunately, the Ringke Hybrid is a big miss.
Likes: Very small lip on the holding on to the LCD screen which makes it easy to do edge to edge swiping. The clear plastic (when not covered in fingerprints) looks cool.
Dislikes:
1) The button feedback is almost non-existent so you can never tell if you've pushed them hard enough. You can mod by cutting the button sides but you should have to if it was designed properly.
2) The clear plastic back, although good in theory, is terrible in practice because it's a fingerprint magnet, dirt/dust/fuzz is impossible to keep out so you see it, and I imagine that the first scratch I get will ruin the look of the case.
3) The small 4 feet that keep the back off a flat surface provide no grip. The phone slides very easily. The feet also feel awkward when handling the phone.
4) On my particular model there was a small molding defect. It wasn't a big deal but not in line with Rearth's high quality products.
Rearth took a chance on a unique design so I applaud them for that. But I would not recommend this case.
http://www.rearthusa.com/google-nexus-4-hybrid-fusion-case
Overall: A lot of people like this case but, next to the S-Line, this is my least favorite. Great in theory...awful in practice.
8. Poetic Palette slim hardcase UPDATED
Like: Excellent feeling coating on the plastic. Even better than the Meifeng. It's also grippy in the hand and on flat surfaces. Not as much as the Meifeng but more then the Rinkge. The bottom and top edges of the case cover more than 50% of the top/bottom edge of the phone giving it more protection on those edges than the Ringke Slim and Meifeng.
Dislike: It doesn't have raised corners like the other two so you get very poor screen-down protection. I would never but my phone screen down with this case. Less corner protection than that Ringke Slim but more than the Meifeng. It has the smallest button openings of all the slim cases. They've put slits on each corner to make it easier to take the case off but that gives it a very lose fit. I'm not going to test it but I'm willing to bet that your phone would pop out of the case if dropped. It's also the widest of the hard cases cases I've reviewed making it less comfortable to hold than the other two,
Overall: If you take your phone out of it's case to clean often, this is your case.
9. Mercury TPU UPDATED
Like: Looks. I have the black one and the sparkle effect is really nice. As long as it's somewhat free of fingerprints, it's pretty grippy too. Great protection as the rubber is soft and covers all front edges of the screen.
Dislikes: The button cutouts are the smallest of all the cases making it uncomfortable to push a button. The cutouts for the mics/speakers are a little off. That doesn't cause a function issue but looks ghetto. It's a fingerprint magnet. The overall fit isn't that good so when you grab it from the sides you can see that the case deform slightly. The mold lines bad and noticeable to the touch. Although I don't have a scale, I feels like the heaviest of the bunch. Also the raised front edge the surrounds the screen is big making the screen look recessed and makes it tough to touch the edge of the screen.
Overall: Not recommended. If you want TPU spend the extra few bucks on the Diztronic and you'll be way happier. This is a "you get what you pay" for case.
So my personal ranking choices are:
Slim hardcase: Rearth Slim because of the feeling (almost like there's no case), superior slimness, great button cutouts, full exposed ports, and looks. Meifeng is the runner up because of the cost, great feeling due to grippy coating and big button cutouts.
TPU: Diztronic TPU because of protection, button feedback (after slits made), feel in the hand and looks. Don't bother with anything else.
Bumper: No brainer. Poetic for the button feedback, surface grip due to rubber edges and protection.
goister said:
Hi,
I'm primarily protecting against scratches, and the occasional drop. I'd like the thinnest and most non intrusive case possible, and one with some grip so the phone doesn't fall so easily.
So far, my choices seem to be Nillkin, Rearth, Poetic and Diztronic. I'm leaning more towards hard cases than soft TPU cases due to aesthetics.
Any pros and cons for the above?
Thanks!
Click to expand...
Click to collapse
I think you are going to have a hard time satisfying all your conditions. The hard cases I have seen do not provide the best protection due to the stiffness of the material. More shock is going to be transmitted to the device and less absorbed by the case. Also many of the hard cases I have seen leave a portion of the bezel open where a drop could damage it. The tpu cases are thicker but that thickness provides protection. The elastic nature of polyurethane provides some shock protection. Also the tpu is much better than the older silicone cases as far as friction being removed from a pocket (also not as bad a lint magnet). It all comes down to how much risk your phone is exposed to and how much you are willing to compromise your desires. Me, I feel this phone is relatively fragile and I err on the side of protection. If you are only concerned about scratches just get a screen and back protector.
AdamUpNorth said:
<snip>3. Poetic Bumper (Bumper) - MY CURRENT CASE.
Like: Great fit. Looks way better in person compared to photos. Buttons are covered but are very easy to push (this is a big deal for me). Get to see the N4 backing. Good drop protection because all sides are covered. Easy to remove. Of all the cases, this case gives me the most confidence NOT sliding on a slanted surface.
<snip>).
Click to expand...
Click to collapse
Glad I went with the poetic bumper case.I just couldnt get down with spending so much for the official google one. It Should be delivered today. Now if I only I had my nexus 4 already lol:silly:
i have a Rearth Ringke Slim (hard case) and i like very much
I just ordered one from diztronic. Pretty simple basic TPU.
Stanerefor said:
I just ordered one from diztronic. Pretty simple basic TPU.
Click to expand...
Click to collapse
Let us know what you think of it and whether it would survive a drop from say chest height.
On a different note, what do people think of this case, it seems like a hard case with a leather cover over the screen which double up as a stand for the screen. Thinking this would be very useful for watching or reading a pdf off the screen.
What kind of case are you guys thinking, im torn between diztronic, a bumber and the above case.
mufc09 said:
Let us know what you think of it and whether it would survive a drop from say chest height.
On a different note, what do people think of this case, it seems like a hard case with a leather cover over the screen which double up as a stand for the screen. Thinking this would be very useful for watching or reading a pdf off the screen.
What kind of case are you guys thinking, im torn between diztronic, a bumber and the above case.
Click to expand...
Click to collapse
Although I wouldn't test it, I would say the Diztronic TPU would save the phone in a chest height drop.
The cover case you linked to looks good. For me it's a no go because I look at my phone too many times a day so the cover would drive me nuts.
As promised in post 4, here are some pics of the Meifeng Hard Skin case. Love the feeling of this thing. See my 2 cents in post #4.
AdamUpNorth said:
As promised in post 4, here are some pics of the Meifeng Hard Skin case. Love the feeling of this thing. See my 2 cents in post #4.
Click to expand...
Click to collapse
Hey is that a glass screen protector you have on? Seems thick, just want to confirm. If so which one? TY
Crisisx1 said:
Hey is that a glass screen protector you have on? Seems thick, just want to confirm. If so which one? TY
Click to expand...
Click to collapse
No, it's the Rearth Ultimate Clear Plus (link)
The original one without the proximity sensor cut out...although I've never had a problem with that.
It is a little thick but the way the light is catching it makes it look much thicker than it is.
AdamUpNorth said:
No, it's the Rearth Ultimate Clear Plus (link)
The original one without the proximity sensor cut out...although I've never had a problem with that.
It is a little thick but the way the light is catching it makes it look much thicker than it is.
Click to expand...
Click to collapse
Oh gotcha... this is what I just bought: http://www.spigen.com/cell-phone/google/nexus-4/google-nexus-4-screen-protector-steinheil-dual.html
Hopefully its as good.
AdamUpNorth said:
Although I wouldn't test it, I would say the Diztronic TPU would save the phone in a chest height drop.
The cover case you linked to looks good. For me it's a no go because I look at my phone too many times a day so the cover would drive me nuts.
Click to expand...
Click to collapse
I did this a couple of days ago with my Diz TPU. I was pulling the phone out of my shirt pocket and it slipped out of my hand and landed on the concrete sidewalk face down. As i was going to pick it up I was expecting the worst but when I turned it over not a scratch. The case has a few scuff marks though, I can live with it.
joe rz said:
I did this a couple of days ago with my Diz TPU. I was pulling the phone out of my shirt pocket and it slipped out of my hand and landed on the concrete sidewalk face down. As i was going to pick it up I was expecting the worst but when I turned it over not a scratch. The case has a few scuff marks though, I can live with it.
Click to expand...
Click to collapse
Good stuff!!
Sent from my Nexus 4 using xda premium
What about a bumper + a best screens ever screen protector ?
Sent from my Nexus 4 using xda app-developers app
Here is the case I bought...
http://www.amazon.com/gp/product/B00AH86WMU/ref=oh_details_o00_s00_i00
Anyone who has bought this, feedback is appreciated
AdamUpNorth said:
UPDATED 2013-02-05 7pm EST
1. S-Line (TPU)
Like: Cheapest of the bunch. The soft rubber gives the most grip of all the cases I have.
Don't Like: IMO it looks ghetto. Poor molding so there are sharp edges everywhere. I guess you could trim this but it already looks like a hack job. The buttons are covered and are difficult to push. Tried this for 5 seconds and then tore it off.
3. Poetic Bumper (Bumper) - MY CURRENT CASE.
Like: Great fit. Looks way better in person compared to photos. Buttons are covered but are very easy to push (this is a big deal for me). Get to see the N4 backing. Good drop protection because all sides are covered. Easy to remove. Of all the cases, this case gives me the most confidence NOT sliding on a slanted surface.
Don't Like: Makes the phone feel wide. There's no backing so it's not as comfortable to hold compared to a case with a backing. This isn't something no one seems to talk about...it just feels odd. Makes one-hand operation tough.
Note: The back of the phone is exposed so you may want to put a rear screen protector or vinyl (i.e. DBrand). I have a screen protector (which is really slippery when finger grease is on it so I've ordered the carbon fiber vinyl back from DBrand..it's in the mail).
Click to expand...
Click to collapse
I have the poetic bumper and the TPU S-Line Case and agree with this review. I'm currently using the poetic bumper for the exact same reasons mentioned above. I think I'm going to order the Diztronic Matte Back Black TPU Case since it seems to offer more protection. Has anyone ever purchased accessories from HandHeldItems.com (really inexpensive but not sure if thats good or bad)? I purchased a couple of cases (hard case and soft gel case) and a few screen protectors from them and will see how they are when I receive them.
These are the two cases I ordered:
Black Rubberized Hard Case
Slim Fit Flexible Jelly Rubber Case
AW: Case suggestions
mammenj said:
Anyone who has bought this, feedback is appreciated
Click to expand...
Click to collapse
You could be the first
I just noticed a few scratches that I'll have to live with.. Maybe I'll have to buy a case now (thought going naked would have been fine)
I know there are plenty of topic on this, but most cover actual defects.
Btw, just wanted to say that I LOVE this device. No way I'm returning. Not even this unit! Can't! Spent soo much time customizing it, and even the benchmarks are slightly above average
Anyway... My problem right now is the chamfered edges and the bottom speaker grill.
The silver One is susceptible to the same amount of scratches as the Black One, albeit they won't be as prominent on the silver variant.
The unit I'm talking about is actually a replacement. The first One I owned had defects, but even for the short time I had it, it somehow managed to build a few dents and scuffs on the chamfered edge up at the top speaker grill.
This time, the problem's on the bottom! I have a few scuffs on the bottom chamfered edge... It's been 4 days in my possession, and already is growing hits and dings. Now here's the interesting part.. As a university student, school's out and the phone has pretty much left the house only once! Other days it laid either in my hand, on my pocket, or on the floor right by my bed.
I looked at it and thought that maybe I can polish them when they get worse.. But things took a turn for the worse right away!! As I was examining the scuffs on the edge, I came across a hairline scratch that extended from the bottom of the lower speaker grill to the top (of the speaker grill) -- almost like a crack -- a hairline crack. Looks as if a pencil lightly went over it.
I've attached photos for your viewing pleasure, but as minor as they appear, note that it's only been about 4 days!! I'm wondering what'll come out of it over an extended period of use.. Guess I can live with whatever has happened to date though =]
*please note that the images aren't too good a representation of the actual damage to the device. It's slightly worse in person -- the abundance of light blurs the scratches a bit.
Arghhh the photos have since showed less of the damage as I had to resize the images to 640* 425 (instead of 4288 * 2848 )
To me, it's just like a dead pixel. You can't tell it's there in normal use, but once you find it, it'll haunt you for a while. At one point you won't care.. But when you see it again, you'll start kicking yourself.
I've been babying my phone, but I think it's time for me to go up onto Amazon and buy myself a good case. *flies to look at the Accessories forum*
Any of you folks keeping your phone naked experience any unexplained scuffs and nicks on your edges? Scratches on your speaker grill?
You guys think that we'd be able to -- at some point -- replace the speaker grills with OEM parts? I'm sure people will come across much worse problems...
No matter what device, what manufacture or what materials the device is made out of, if you don't use a case, this will happen and worst. Your scratches are barely visible. I had to zoom in the picture to see them.
I don't have the device yet but I already have 3 cases for it and a pack of screen protectors. The official flip case and 2 tpu s line cases, one black and one clear.
Sent from my HTC myTouch 4g using xda premium
I agree. I guess it's just that I'm bummed it happened so soon!
I'll learn to live with this. I don;t think I'm ready for a case just yet. The cases I've seen so far don't look too good and add way too much bulk. The slimmer ones don't cover the top and bottom chamfered edges...
I'll keep looking. I do have full body screen protection, except it only covers the screen itself and the rear of the device. Speaker grills (understandably) are left to be in the open
Did you check the phone over when you got it? Just asking as I've seen a one or two with some nicks and scratches out of the box I'm guessing it happened when polishing the chamfered edge.
Man, how do you use your phone to manage to put these scratches and dents.
I have had the phone since last Friday with daily use and no scratches, I just put a skinomi clear film in the back to protect against scratches and dents, the front is naked, looks beautiful, you don't even notice the film is there
Sent from my HTC One using Tapatalk 2
I have films on the back and front of the device myself!
I honestly do not know where these came from. It's been on my desk or on the floor by my bed. Hasn't left the house -- maybe just once..
Anyway I attached another saddening photo. This was taken with my old Atrix.
I'm thinking that this may have been a result of missing the charging port and accidentally sliding the micro usb plug into the front of the phone while I was half asleep...
Anyway, I'm sitting here and there's much greater things to worry about. It could have been much worse... A random scratch on the screen or a deeper nick...
Besides, the bottom speaker grill is a separate piece and if it continues to get scratched up and continues to bother me, I'll just see if i can get it replaced..
Hope I actually move on. This is the same feeling as when I found a dent on my $700 guitar.. I got over that. So ill probably get high over this
Aha I'm wondering what it'll feel like when I find a small scratch on my first new car -_-... Boy will I be a mess!
Sent from my HTC One using xda premium
Aluminum is a soft metal, unlike titanium or other harder metals. They chose aluminum because it is light weight.
So do you think black is more durable? I'm going to buy One today so I might considering buying black instead if thats the case.
Btw usually stratches goes away when wiped properly. At least do on my black One S. Dents, however, stays forever.
muayyadf1 said:
Aluminum is a soft metal, unlike titanium or other harder metals. They chose aluminum because it is light weight.
Click to expand...
Click to collapse
Yep. But I'm hoping that maybe next year they make the switch to a harder metal like steel... The OPPO Find 5 allegedly has a steel frame construction. Sure it's heavy, but if they get the right look, whatever! Durability should be of more importance than weight..
Now if it does weigh too much, maybe implement the steel construction only around certain areas...
I'm aware this will pull up costs, but the device would be that much better!
Dharkan said:
So do you think black is more durable? I'm going to buy One today so I might considering buying black instead if thats the case.
Click to expand...
Click to collapse
There's another thread about scuffs on the black edition. Maybe I've got too far... You can't see this if you're not looking for them, but to me they'll always be there.
I've seen multiple accounts of folks on here see through their black paint into the aluminum underneath.. You'd want to avoid that.. So I don't regret having the silver edition.
They both scratch the same amount, but the black shows more..
Good luck and I hope you enjoy your One just as much as I am!
Choose the device that also to you more! If you like the stealthy black, but that! But if you do, go for the Poetic Atmosphere case.. Looks pretty nice on the black variant.. The silver one.. Not so much.
Still going to look for a case, but it isn't my priority.. I'd rather keep the phone naked and enjoy the cool feel everyone I touch it in the morning!
Dharkan said:
Btw usually stratches goes away when wiped properly. At least do on my black One S. Dents, however, stays forever.
Click to expand...
Click to collapse
I've wipes this, took a moist set of wipes below the actual holes, but nothing. There is a scratch, not a surface scratch, it's slightly deeper.
100% sure this ain't going away.. But i haven't lost all hope! As this phone e grows in popularity, some ebay sellers will manage to get their hands on some grills and they should be replaced rather easily since they're in there only via an adhesive. Would have been more ticked off if it was on the screen, on the chamfered edge off of the back, or even on the back itself..
Here's hoping the grills are replaceable and I can do something about it in maybe 6 months!
Sent from my HTC One using xda premium
I had mine with no case for almost 1 week and not a single scratch
Sent from my HTC One using xda app-developers app
No idea what to say. I'm keeping it naked. Maybe this was from the factory.. I don't see how you can get a scratch from the bottom to the top of a grill without taking your phone out much...
Maybe I didn't notice this before, but i still am worried about the durability of the device. If pocketnow reports bad durability, then I've got no option but to go with a case. Right now i dont even know where these came from.. No sand in my room, no hard metals that would easily scratch anodized aluminum..
It really IS a mystery...
Sent from my HTC One using xda premium
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
hamdir said:
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
Click to expand...
Click to collapse
Tell me about it! When I bought snap on cases for my Atrix, the plastic around the phone was soo scuffed it actually looks nasty without a case. Definitely not making that mistake again!
I don't think tpu or hardshell plastic cases can really damage the aluminum bezel as aluminum is harder..
But it's still something I worry about and a case like the one you linked to is just perfect.
Sent from my HTC One using xda premium
WolfDale7 said:
Tell me about it! When I bought snap on cases for my Atrix, the plastic around the phone was soo scuffed it actually looks nasty without a case. Definitely not making that mistake again!
I don't think tpu or hardshell plastic cases can really damage the aluminum bezel as aluminum is harder..
But it's still something I worry about and a case like the one you linked to is just perfect.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
it's not the aluminum i'm worried about
hamdir said:
it's not the aluminum i'm worried about
Click to expand...
Click to collapse
Oh Crap. Overlooked that!
Wow..
Kay so time to look for a similar case to the one you've got
I want to keep the beauty of the HTC One visible while still protecting it from further scratches...
Everything over on the accessories forum doesn't really cut it go me :/...
I'll go to this mall that pretty much just sells phone cases and phones. Hopefully I find a store that has what I want for a reasonable price
Sent from my HTC One using xda premium
WolfDale7 said:
I agree. I guess it's just that I'm bummed it happened so soon!
I'll learn to live with this. I don;t think I'm ready for a case just yet. The cases I've seen so far don't look too good and add way too much bulk. The slimmer ones don't cover the top and bottom chamfered edges...
I'll keep looking. I do have full body screen protection, except it only covers the screen itself and the rear of the device. Speaker grills (understandably) are left to be in the open
Click to expand...
Click to collapse
Probably the thinnest, plastic case around. does not add bulk like otter cases do. you should check it out...
http://www.bestbuy.com/site/Platinu...&st=platinum series case htc one m7&cp=1&lp=1
Also, it's aluminum. Whoever thinks aluminum, a softer metal, won't scratch, is lying to themselves.
hamdir said:
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
Click to expand...
Click to collapse
I feel you but the cheap TPU's will scratch phones too. Only cases I have found to never ever scratch a phone are Otterbox has a combo silicone tpu which is very soft and nonabrasive unlike normal tpu. Capdase Aluminum cases they are soft touch silicone on the inside will never ever scratch. And last my old friend Incipio their double layer cases have a soft touch silicone also that will not scratch the phone.
nullkill said:
I feel you but the cheap TPU's will scratch phones too. Only cases I have found to never ever scratch a phone are Otterbox has a combo silicone tpu which is very soft and nonabrasive unlike normal tpu. Capdase Aluminum cases they are soft touch silicone on the inside will never ever scratch. And last my old friend Incipio their double layer cases have a soft touch silicone also that will not scratch the phone.
Click to expand...
Click to collapse
how will a rubbery cover scratch it? you mean if it falls?
hamdir said:
how will a rubbery cover scratch it? you mean if it falls?
Click to expand...
Click to collapse
No TPU is not rubbery its more like flexible hard plastic. If the case fits well the TPU material will scratch the phone from taking it off putting it back too much. If anything get in between the phone and the case game over it's almost worse than naked. It's sold as rubber like or soft but I have 20 different TPU cases and all are the same crap. Otterbox and the others I mentioned use silicone which is like a soft rubber. TPU is a cheap is injected crappy material that is why you will find cases as low as $5 or lower.
Hello Everybody
I have installed a transparent but not so slim case to my LG G6.
I wanted to know whether this phone be maintained in mint condition without case easily ?
Please let me know your thoughts.
Hi, I Didn't thought about not using a case, currently using voia slim case that came with the unit free that i bought with some local store here in the Philippines. I am not sure if i would use it without a case, it seems fragile to me
The class back necessitates done protection, using Spigen ultra hybrid slim case.
Sent from my LG-H870 using Tapatalk
Using Spigen Thin fit case with SF matt finish.
Sent from my LG-H870 using Tapatalk
I use it without any protection ... The problem is the rear glass camera .. it's very very very easy to scratch poor quality
I don't use cases, I hate them. I frankly hate that today phones are presented without cases, companies present how they look nice without case etc. But they are made in a way that you have to use some ugly case anyway (camera bump, slippery back etc.) .
So I am using G6 without case (one of the few phones without camera bump and it is easy to hold) and so far it is ok, but I am afraid about the rear camera glasses of course...
I wasn't using a case, then as I took the phone out of my pocket it slipped and smashed on the floor. Got it repaired and now using a Spigen Thin Fit case on it (this one in fact https://www.amazon.co.uk/Spigen-Coated-Surface-Excellent-Compatible/dp/B01N6T3N9T )
I don't find it gets in the way at all, or adds too much weight to the phone, but as long as manufacturers keep insisting that "premium build" equals "making it out of fragile materials like glass" I'll will be using a case on all phones from now on.
Previously had a G4 and loved that the back was just a removable piece of plastic that would stand up to pretty much everything. I don't understand why phones have moved away from this kind of build over the last few years, and gone to slippy, delicate glass!
i hate cases .. they kill the design
i prefer Skins from Dbrand
I am using the UAG Ash case, still case see the case and gives it protection.
DamiDev said:
i hate cases .. they kill the design
i prefer Skins from Dbrand
Click to expand...
Click to collapse
Oooh, some of those are very nice!
I do love the design of the phone, but it's way too slippery for me not to use a case. I went for a Snakehive leather flip case and tempered glass on the screen.
Dbrand skin on the back, and insurance I love the feel of the naked phone.
Thanks to everyone for your participation and thoughts.
I am also considering skins instead of cases, but the problem with the skin is it is getting dirt especially in the edges after some time and they are turning yellowish as well.
The cases are cheap at least what I am using, but skins neither cheap not easy to apply again and again.
The skin I tried previously was Invisible Shield.
My phone colour is blue, so. the case/skin options are again getting limited, only transparent cases/skins are looking good.
Let me know your thoughts.
I use it without a case and got a skin for the back and camera lens. Keeps it from getting scratched to hell. I have dinged up against something while it was in my pocket and chipped the top but other than that nothing major at all. It was my fault those pesky basketball shorts let the pockets swing to much
I don't use case and i can tell lens protection is really really bad.
Ringke air crystal view ! (Y)
I am currently caseless. Sometimes I put a case on my phone but after a while, when I take it out to clean out the dust, I remember how nice it was with no case and leave it out for a few months. I have a thin TPU one which is nice, and a real wood one which looks amazingly good even though it is kind of a brick.
I am not a big fan of skins (had a clear one on an old phone and after a while it yellowed and peeled), but I do like the idea of the real wood ones (not the dbrand ones which are vinyl even if they look like wood). Might try one of those when my wood case breaks (which I'm sure it will).
As for the camera glass scratches - look through the forums here; consensus is that the glass is not scratching but it has a soft coating that scratches. This coating can be polished off and then no more scratches. And it doesn't seem that a case is any protection from whatever (temperature? air pressure?) is causing a few mysterious camera glass shatterings.
kingdave82 said:
I wasn't using a case, then as I took the phone out of my pocket it slipped and smashed on the floor. Got it repaired and now using a Spigen Thin Fit case on it (this one in fact https://www.amazon.co.uk/Spigen-Coated-Surface-Excellent-Compatible/dp/B01N6T3N9T )
I don't find it gets in the way at all, or adds too much weight to the phone, but as long as manufacturers keep insisting that "premium build" equals "making it out of fragile materials like glass" I'll will be using a case on all phones from now on.
Previously had a G4 and loved that the back was just a removable piece of plastic that would stand up to pretty much everything. I don't understand why phones have moved away from this kind of build over the last few years, and gone to slippy, delicate glass!
Click to expand...
Click to collapse
Yip, a brilliant, really slim fit case.
Sent from my LG-H870 using Tapatalk
i don't use a case on this phone yet. going for a skin whenever i get around to it with my list of things to buy. first time i went longer then a few days without a case. i went without a case since march. I use a holster on my pants or shorts. I am so careful with my phone so it doesn't get scratched or dinged up.
I was gonna go with a skin like Dbrand but I got this really thin case instead. Been extremely happy with it
https://www.amazon.com/gp/product/B071KXB9Z2/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
Pics now attached!
I have always preferred minimalist cases, especially on a phone this gorgeous. I've always had great luck with the Ringke and Nillkin slim/thin fit cases but, this time around, when I went to pre-order my phone, the only slim cases available were manufactured by Spigen and Elago. Now, I LOVE Elgo cases because they're almost like not having a case at all, just like a skin. They offer no real drop protection, but are primarily designed for scratch protection. Absolutely no lip on the front to protect the display. Still, they fit the bill for me and are my case of choice when at home or the office. Places where I NEVER drop my phone and, if I do, it's on very soft carpet.
Anyway, I went ahead and ordered the Spigen slim case. While it DID look awesome and provided some added protection in the form of a slight lip at the top and bottom of the display, ultimately the case failed me. My phone is perfectly unscathed. However, the Spigen design results in a ton of flex and bend when removing the case. Eventually, this lead to the case cracking along the backside. Not acceptable.
Today I received my Ringke slim case (now available on Amazon) and I must say I'm VERY happy with it. The fit is perfect, almost no bend or flex when taking the case off or putting it on, and the lip of protection for the display along the top and bottom edge is even more pronounced than the lip on the Spigen model.
5/5 stars from me. An awesome, lightweight, nearly zero bulk case that offers excellent drop and scratch protection. If this is what you're looking for, look no further than Ringke's offering. Go get it!
pieces of cake said:
Pics to follow soon.
I have always preferred minimalist cases, especially on a phone this gorgeous. I've always had great luck with the Ringke and Nillkin slim/thin fit cases but, this time around, when I went to pre-order my phone, the only slim cases available were manufactured by Spigen and Elago. Now, I LOVE Elgo cases because they're almost like not having a case at all, just like a skin. They offer no real drop protection, but are primarily designed for scratch protection. Absolutely no lip on the front to protect the display. Still, they fit the bill for me and are my case of choice when at home or the office. Places where I NEVER drop my phone and, if I do, it's on very soft carpet.
Anyway, I went ahead and ordered the Spigen slim case. While it DID look awesome and provided some added protection in the form of a slight lip at the top and bottom of the display, ultimately the case failed me. My phone is perfectly unscathed. However, the Spigen design results in a ton of flex and bend when removing the case. Eventually, this lead to the case cracking along the backside. Not acceptable.
Today I received my Ringke slim case (now available on Amazon) and I must say I'm VERY happy with it. The fit is perfect, almost no bend or flex when taking the case off or putting it on, and the lip of protection for the display along the top and bottom edge is even more pronounced than the lip on the Spigen model.
5/5 stars from me. An awesome, lightweight, nearly zero bulk case that offers excellent drop and scratch protection. If this is what you're looking for, look no further than Ringke's offering. Go get it!
Click to expand...
Click to collapse
Do you think this will work with the whitestone dome glass protector?
Sent from my SM-G965U using Tapatalk
daddymikey1975 said:
Do you think this will work with the whitestone dome glass protector?
Click to expand...
Click to collapse
Absolutely, it will. I used it together with the Whitestone on my S8+ and Note8.
I won't use Whitestone anymore though. Way overpriced and far too fragile. They also tend to lift up over time, even with a perfect installation and no drops or knocks. There are smarter options available, if you're patient.
pieces of cake said:
Absolutely, it will. I used it together with the Whitestone on my S8+ and Note8.
I won't use Whitestone anymore though. Way overpriced and far too fragile. They also tend to lift up over time, even with a perfect installation and no drops or knocks. There are smarter options available, if you're patient.
Click to expand...
Click to collapse
I had a whitestone on my S7 Edge for a year and my note 8 for the last 6 months with good results.
I'm open to other suggestions though...
Sent from my SM-G965U using Tapatalk
Pics now attached. You can see my fingers on the other side of the phone with it face down on the table, demonstrating the lift the lip provides. The display is well-protected. This is surely the slimmest case you can get for the S9+ that still offers drop protection and guards against screen damage in the event of a fall.
You can also see that the camera is well protected. I was even able to fit a large metal plate behind the case to allow it to attach to my car mount, and I've positioned it in such a place as to avoid any interference with wireless charging. Everything works properly.
I got this case and love it as well! Even thinking about getting some of the other colors available, for days when you need a little extra protection their onyx case is not bad either, still thin but not as slim
vwite said:
I got this case and love it as well! Even thinking about getting some of the other colors available, for days when you need a little extra protection their onyx case is not bad either, still thin but not as slim
Click to expand...
Click to collapse
Agreed. Top notch case.
ugly AF case, those buttons cutouts must not be on the case.
x111 said:
ugly AF case, those buttons cutouts must not be on the case.
Click to expand...
Click to collapse
Sure, the case isn't for everyone. Some people (perhaps you?) prefer a huge bulky case with all kinds of patterns colors and textures that detract from the clean lines and curves of the devices. But this is a plain black case, with almost nothing to it. What about it is "ugly," in your opinion?
Also, I don't even know what this means: "those buttons [sic] cutouts must not be on the case." The cutouts must not be on the case? What?! Can you help us understand what the heck you're saying?
pieces of cake said:
Sure, the case isn't for everyone. Some people (perhaps you?) prefer a huge bulky case with all kinds of patterns colors and textures that detract from the clean lines and curves of the devices. But this is a plain black case, with almost nothing to it. What about it is "ugly," in your opinion?
Also, I don't even know what this means: "those buttons [sic] cutouts must not be on the case." The cutouts must not be on the case? What?! Can you help us understand what the heck you're saying?
Click to expand...
Click to collapse
yeah he probably prefer one of those ugly otterbox or UAG cases that instead of cutouts have huge layers of silicone or tpu covering the buttons and making them harder to press. Those cases sell wel so yeah a lot of people like them, to each their own.
x111 said:
ugly AF case, those buttons cutouts must not be on the case.
Click to expand...
Click to collapse
What case are you using?
Care to show where you positioned the metal plate?
Sent from my SM-G965U1 using Tapatalk
yeah, uag cases are beautiful but also have some ugly cutouts where buttons are.
pieces of cake said:
Pics now attached. You can see my fingers on the other side of the phone with it face down on the table, demonstrating the lift the lip provides. The display is well-protected. This is surely the slimmest case you can get for the S9+ that still offers drop protection and guards against screen damage in the event of a fall.
You can also see that the camera is well protected. I was even able to fit a large metal plate behind the case to allow it to attach to my car mount, and I've positioned it in such a place as to avoid any interference with wireless charging. Everything works properly.
Click to expand...
Click to collapse
tips on how to move the clock to the middle of the screen like yours?
x111 said:
yeah, uag cases are beautiful but also have some ugly cutouts where buttons are.
Click to expand...
Click to collapse
UAG cases don't compliment the design of the S9/S9+ at all. They're functional, and offer great protection, but they're bulky and rugged-looking. The S9 is not bulky or rugged-looking. That's not its design.
Surprise! Button cutouts allow for direct access to the buttons. Keeping the feel and function of those buttons STOCK.
xxlikquidxx said:
tips on how to move the clock to the middle of the screen like yours?
Click to expand...
Click to collapse
Substratum/Andromeda System Mods.
Thanks for the detailed reviews and pics. Although this case isn't for me, I appreciate your review in that it helped me decide the same ??Guess I'll stick to the one that comes with the phone out of the box.
IndDoc said:
Thanks for the detailed reviews and pics. Although this case isn't for me, I appreciate your review in that it helped me decide the same ??Guess I'll stick to the one that comes with the phone out of the box.
Click to expand...
Click to collapse
Your phone came with a case?
crzycrkr said:
Care to show where you positioned the metal plate?
Click to expand...
Click to collapse
Right there.
pieces of cake said:
Right there.
Click to expand...
Click to collapse
Sorry, didn't realize the rotation was off, but you still get the idea, I'm sure.