Unable To Flash Stock Rom On GT S5360 !!!!!!
Whenever I Try To Flash Stock Rom That Contains A Single Tar File Using Odin the process fails
but when i try to flash Stock Rom that contains multiple files such as BootLoader, PDA , Phone ,CSC the flashing completes Successfully.
The Problem is that i don't Have Stock Rom with latest firmware which contains Multiple Files.
I downloaded the latest firmware from Samfirmware.com but it contains only a single file
Can Anyone please tell me Where Can I get The Stock rom with latest firmware which contains multiple files..
I tried to update my phone Using Firmware Over The Air but after updating to DDKL2 baseband version it says It cannot update the phone try using Samsung kies and same problem persists using Samsung Kies.
The Latest firmware for my region is DDLE1.
Currently i am running DDKL2 version which was released in November 2011
So Please Please Please Help Me!!!!!!!!!
Check this forum. Using this you can convert one .tar file to the odin compatible three files(pda, csc and modem)
http://forum.xda-developers.com/showthread.php?t=1611225
1st you may need to check here to download a compatible stock rom for your region. If you already have it just follow the instructions in above link and you will get the flashable files.
Try to flash other stock rom package..
sunamit37 said:
Unable To Flash Stock Rom On GT S5360 !!!!!!
Whenever I Try To Flash Stock Rom That Contains A Single Tar File Using Odin the process fails
but when i try to flash Stock Rom that contains multiple files such as BootLoader, PDA , Phone ,CSC the flashing completes Successfully.
The Problem is that i don't Have Stock Rom with latest firmware which contains Multiple Files.
I downloaded the latest firmware from Samfirmware.com but it contains only a single file
Can Anyone please tell me Where Can I get The Stock rom with latest firmware which contains multiple files..
I tried to update my phone Using Firmware Over The Air but after updating to DDKL2 baseband version it says It cannot update the phone try using Samsung kies and same problem persists using Samsung Kies.
The Latest firmware for my region is DDLE1.
Currently i am running DDKL2 version which was released in November 2011
So Please Please Please Help Me!!!!!!!!!
Click to expand...
Click to collapse
If you flashed your Galaxy Y using ONLY 1 .tar file, It Will Fail on any OS .. Why ? Because Our Galaxy Y cannot flash one single package and it must be multiple file so the flashing will successfully finished , Use Doky's SplitFUS2-The Odinizer in order to have 3 files to be used to flash your Galaxy Y ....
how to get the bootloader and pit file
Sean De Jesus said:
If you flashed your Galaxy Y using ONLY 1 .tar file, It Will Fail on any OS .. Why ? Because Our Galaxy Y cannot flash one single package and it must be multiple file so the flashing will successfully finished , Use Doky's SplitFUS2-The Odinizer in order to have 3 files to be used to flash your Galaxy Y ....
Click to expand...
Click to collapse
How can I get the bootloader and pit file because I tried spliting a single package file it only contained PDA, PHONE and CSC file, there's 2 more space in odin for bootloader and pit. thanks
psychvince said:
How can I get the bootloader and pit file because I tried spliting a single package file it only contained PDA, PHONE and CSC file, there's 2 more space in odin for bootloader and pit. thanks
Click to expand...
Click to collapse
Leave those fields empty.. You can flash stock rom using those three files:thumbup:
Sent from my GT-S5360 using Tapatalk 2
sunamit37 said:
Unable To Flash Stock Rom On GT S5360 !!!!!!
Whenever I Try To Flash Stock Rom That Contains A Single Tar File Using Odin the process fails
but when i try to flash Stock Rom that contains multiple files such as BootLoader, PDA , Phone ,CSC the flashing completes Successfully.
The Problem is that i don't Have Stock Rom with latest firmware which contains Multiple Files.
I downloaded the latest firmware from Samfirmware.com but it contains only a single file
Can Anyone please tell me Where Can I get The Stock rom with latest firmware which contains multiple files..
I tried to update my phone Using Firmware Over The Air but after updating to DDKL2 baseband version it says It cannot update the phone try using Samsung kies and same problem persists using Samsung Kies.
The Latest firmware for my region is DDLE1.
Currently i am running DDKL2 version which was released in November 2011
So Please Please Please Help Me!!!!!!!!!
Click to expand...
Click to collapse
no need for splitfus2. flash the tar from sammobile in pda section. no need for any other files.
sunamit37 said:
Unable To Flash Stock Rom On GT S5360 !!!!!!
Whenever I Try To Flash Stock Rom That Contains A Single Tar File Using Odin the process fails
but when i try to flash Stock Rom that contains multiple files such as BootLoader, PDA , Phone ,CSC the flashing completes Successfully.
The Problem is that i don't Have Stock Rom with latest firmware which contains Multiple Files.
I downloaded the latest firmware from Samfirmware.com but it contains only a single file
Can Anyone please tell me Where Can I get The Stock rom with latest firmware which contains multiple files..
I tried to update my phone Using Firmware Over The Air but after updating to DDKL2 baseband version it says It cannot update the phone try using Samsung kies and same problem persists using Samsung Kies.
The Latest firmware for my region is DDLE1.
Currently i am running DDKL2 version which was released in November 2011
So Please Please Please Help Me!!!!!!!!!
Click to expand...
Click to collapse
put the single file in pda and then flash
it will complete successfully
Single tar files are updates that are used by kies to update the device
Samfirmware gets this from the temp folder of kies when the firmware update is downliaded by kies...(this wat i got to know)
But using odin to flash a single tar has never been successful
On any samsung device that i know off ....the best way is to use
Splitfus to get the three files or i could do that for u...
Happy to help
Sent from my GT-S5360 using ,xda app-developers app
SSSidGGG said:
Single tar files are updates that are used by kies to update the device
Samfirmware gets this from the temp folder of kies when the firmware update is downliaded by kies...(this wat i got to know)
But using odin to flash a single tar has never been successful
On any samsung device that i know off ....the best way is to use
Splitfus to get the three files or i could do that for u...
Happy to help
Sent from my GT-S5360 using ,xda app-developers app
Click to expand...
Click to collapse
i always use 1 tar package and never faced a problem
weird coz
ive tried it on Mini,Gio,Ace,S2
never worked for me in those devices!
I can flash the only one .tar files in my Pocket successfully.
Sent from my GT-S5300 using xda app-developers app
sunamit37 said:
Unable To Flash Stock Rom On GT S5360 !!!!!!
Whenever I Try To Flash Stock Rom That Contains A Single Tar File Using Odin the process fails
but when i try to flash Stock Rom that contains multiple files such as BootLoader, PDA , Phone ,CSC the flashing completes Successfully.
The Problem is that i don't Have Stock Rom with latest firmware which contains Multiple Files.
I downloaded the latest firmware from Samfirmware.com but it contains only a single file
Can Anyone please tell me Where Can I get The Stock rom with latest firmware which contains multiple files..
I tried to update my phone Using Firmware Over The Air but after updating to DDKL2 baseband version it says It cannot update the phone try using Samsung kies and same problem persists using Samsung Kies.
The Latest firmware for my region is DDLE1.
Currently i am running DDKL2 version which was released in November 2011
So Please Please Please Help Me!!!!!!!!!
Click to expand...
Click to collapse
put the single file in pda section then flash
Related
I am on UK Galaxy S and wish to go back to an original firmware for the moment through KIES. I have tried flashing various firmwares through ODIN to then have KIES that the firmware is not updatable
I have the latest KIES - please can some one tell me which firmware to flash back to using ODIN and the connect through KIES - thanks
You may be better off using the spoof tool.
To spoof I need to be rooted and busy box - what is the best method?
Kies only reads official firmware and will not read stock firmware in regards to update .
Spoof firmware best bet as looks like you are one of the 99.99% that does not backup before modding .
http://forum.xda-developers.com/showthread.php?p=11963455
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
You may find some useful info here http://forum.xda-developers.com/showthread.php?t=1040769
I've flashed jm1 via odin then upgraded to jpy via kies numerous times, so that's not quite true
@jamiec902
Go to samfirmware.com. Download jm1 firmware plus 512 pit file plus the flashing instructions.follow their excellent guide to the letter to flash jm1 via odin. You will then be able to upgrade to jpy via kies. You will lose the 3 button reset as jm1 messes the bootloader, the solution to this can be found elsewhere on this site. Best of luck
Sent from my GT-I9000 using XDA App
Flash XWJS7 XEE via Odin. Kies will then detect and update to XWJVB XEE. Worked for me.
Jamiec902 said:
I am on UK Galaxy S and wish to go back to an original firmware for the moment through KIES. I have tried flashing various firmwares through ODIN to then have KIES that the firmware is not updatable
I have the latest KIES - please can some one tell me which firmware to flash back to using ODIN and the connect through KIES - thanks
Click to expand...
Click to collapse
Flash JPY using Odin, use pit and re-partition if you like: Download (Double-click to extract).
The firmware does not include bootloaders and will not mess your phone. This is the latest firmware for UK.
The best method is downloading the official firmware using Check Fus Downloader as I did. You can find it in "Themes and Apps" section.
Simply, you have to remember your old firmware number e.g I9000ADJM1
I have Samsung Galaxy S on O2 UK, my firmware for Eclair was :
I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1
after you download the program, go to that directory and type
Code:
CheckFusDownloader.exe -c I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3 XEU
XEU is the CSC for your old firmware.
of course you should change numbers to your firmware
it will check the latest firmware which is froyo. replace the option "-c" with "-dl" to download the firmware.
if you need help PM me.
P.S: there are missing steps needed to carry on the method, you can find it in the thread mentioned above.
Hey guys, I am having problem installing firmware's trough ODIN.
The New Update Indian Update: S5360DDLK2_S5360ODDLK1_INU
I find only 1 file Named: S5360DDLK2_S5360ODDLK1_S5360DDLK1_HOME.tar.md5
i cant understand how to install this trough ODIN and which version of ODIN should I use?
because there isn't any PDA,MODEM,CSC,BOOTLOADER files in this version.
Please Guide me A.S.A.P.
Thanks.
bryanfr4 said:
Hey guys, I am having problem installing firmware's trough ODIN.
The New Update Indian Update: S5360DDLK2_S5360ODDLK1_INU
I find only 1 file Named: S5360DDLK2_S5360ODDLK1_S5360DDLK1_HOME.tar.md5
i cant understand how to install this trough ODIN and which version of ODIN should I use?
because there isn't any PDA,MODEM,CSC,BOOTLOADER files in this version.
Please Guide me A.S.A.P.
Thanks.
Click to expand...
Click to collapse
Dude,if you find only 1 file inside the archive i.e. don't know whats wrong but download the zip again.Download from Sir Dokys' thread below:
Link:http://forum.xda-developers.com/showthread.php?t=1465800
Use odin 1.85. Then Select PDA,MODEM,CSC from the directory where you saved and then plug your Y then it will show Com[xx]
something like that then just flash..Then you are good to go!
amanbhalla04 said:
Dude,if you find only 1 file inside the archive i.e. don't know whats wrong but download the zip again.Download from Sir Dokys' thread below:
Link:http://forum.xda-developers.com/showthread.php?t=1465800
Use odin 1.85. Then Select PDA,MODEM,CSC from the directory where you saved and then plug your Y then it will show Com[xx]
something like that then just flash..Then you are good to go!
Click to expand...
Click to collapse
I downloaded the firmware from the Same link and many other links too. but yet i find the same HOME file in all the firmwares
I wipe installed my galaxy y for the latest software, after installation I'm not able to sign in with google accounts, Kindly help
gapgh said:
I wipe installed my galaxy y for the latest software, after installation I'm not able to sign in with google accounts, Kindly help
Click to expand...
Click to collapse
get a better connection
** rooting is new for me,
nd i am a noob to root....**
bryanfr4 said:
Hey guys, I am having problem installing firmware's trough ODIN.
The New Update Indian Update: S5360DDLK2_S5360ODDLK1_INU
I find only 1 file Named: S5360DDLK2_S5360ODDLK1_S5360DDLK1_HOME.tar.md5
i cant understand how to install this trough ODIN and which version of ODIN should I use?
because there isn't any PDA,MODEM,CSC,BOOTLOADER files in this version.
Please Guide me A.S.A.P.
Thanks.
Click to expand...
Click to collapse
Probably u should open this using winrar and look for the files Inside..
Sent from my GT-S5360 using xda app-developers app
Installing Firmware
If you find problems in installing firmware from sites just try connecting your mobile to kies and put kies in autoupdate mode. if update is available then it will tell you on the basic page. or it will say 'this is the latest firmware. if firmware is available, be ready to download upto 1gb or more data fast. connect your phone to your computer and start firmware update. I suggest you to do it at night, coz it needs phone connected everytime. after upgrade you lose Root but it can be done again. If this doesn't work then you can download official firmwares from sammobile. it is available there.
bryanfr4 said:
Hey guys, I am having problem installing firmware's trough ODIN.
The New Update Indian Update: S5360DDLK2_S5360ODDLK1_INU
I find only 1 file Named: S5360DDLK2_S5360ODDLK1_S5360DDLK1_HOME.tar.md5
i cant understand how to install this trough ODIN and which version of ODIN should I use?
because there isn't any PDA,MODEM,CSC,BOOTLOADER files in this version.
Please Guide me A.S.A.P.
Thanks.
Click to expand...
Click to collapse
Hey.. Stock ROMs available from sammobile and other links will only have one file. But it is useless for us due to an error in its header. So we have to split it into multiple files using a sygwin programme 'splitfus' But this meathod is too complicated and a beginner can't do this.
But sir doky in xda had splitted and uploaded this firmwares. Go to his thread http://forum.xda-developers.com/showthread.php?t=1465800 and download the firmware u want.. & it wil cointain 3 files, load it in appropriate folders and flash it.
Press thankz if i helped
Sent from my GT-S5360 using xda app-developers app
bryanfr4 said:
Hey guys, I am having problem installing firmware's trough ODIN.
The New Update Indian Update: S5360DDLK2_S5360ODDLK1_INU
I find only 1 file Named: S5360DDLK2_S5360ODDLK1_S5360DDLK1_HOME.tar.md5
i cant understand how to install this trough ODIN and which version of ODIN should I use?
because there isn't any PDA,MODEM,CSC,BOOTLOADER files in this version.
Please Guide me A.S.A.P.
Thanks.
Click to expand...
Click to collapse
better use odin version 3 and select this package in pda section and flash it. no need to use splitfus. all one file wipe packages from sam firmware should be flashed in pda section only.
bricked!!!!
please help me and tel mi how to flash via odin my phone is bricked since i tried for merruk i would be happy if i get my touchwiz back or jellyblast v3 by avijit please tel something
:crying:
sent from my desktop
@ankit said:
please help me and tel mi how to flash via odin my phone is bricked since i tried for merruk i would be happy if i get my touchwiz back or jellyblast v3 by avijit please tel something
:crying:
sent from my desktop
Click to expand...
Click to collapse
download package from sammobile or live.samsung-updates.com and then follow my post above. jellyblast is banned rom if i remember correctly so no discussions about it.
bryanfr4 said:
Hey guys, I am having problem installing firmware's trough ODIN.
The New Update Indian Update: S5360DDLK2_S5360ODDLK1_INU
I find only 1 file Named: S5360DDLK2_S5360ODDLK1_S5360DDLK1_HOME.tar.md5
i cant understand how to install this trough ODIN and which version of ODIN should I use?
because there isn't any PDA,MODEM,CSC,BOOTLOADER files in this version.
Please Guide me A.S.A.P.
Thanks.
Click to expand...
Click to collapse
hope this might help you how to flash galaxy y with odin
http://www.techweem.com/2013/01/flash-samsung-galaxy-y-with-stock.html
bryanfr4 said:
Hey guys, I am having problem installing firmware's trough ODIN.
The New Update Indian Update: S5360DDLK2_S5360ODDLK1_INU
I find only 1 file Named: S5360DDLK2_S5360ODDLK1_S5360DDLK1_HOME.tar.md5
i cant understand how to install this trough ODIN and which version of ODIN should I use?
because there isn't any PDA,MODEM,CSC,BOOTLOADER files in this version.
Please Guide me A.S.A.P.
Thanks.
Click to expand...
Click to collapse
flash it in pda section no need for splitfus
1 first, download firmware that had been splitted into 3 files (PDA,MODEM,CSC)
2 then install kies from ur GY box
3 and then install samsung usb driver
4 open odin
5 put ur galaxy young into odin mode(turn off your phone, then press Vol Down+Home key+Power)
6 insert firmware that u had downloaded before in correct place
7 press start
8 wait until your GY showing Android
9 and you had been installed a stock ROM
NOTE: BACKUP YOUR FILES FIRST
Hi, this is my first post!
I have a Samsung GT-S5360 smartphone , untouched (with official firmware). Gingerbread 2.3.6 (latest firmware).
For some reasons i want to reinstall firmware via Kies, not from Odin... Is that possible?
I followed this method but dont work becouse it is for Galaxy S3 Smartphone: http://forum.xda-developers.com/galaxy-s3/general/guide-how-to-reinstall-stock-firmware-t1978840
Kies shows me : Error - GT-S5360 does not support initialization
I have original USB Cable and latest kies.
Thanks for reading and sorry for my bad english!
odin is much eaiser and quicker
kies really isnt worth bothering with
you can find the firmware
http://forum.xda-developers.com/showthread.php?t=2568853
sarlind said:
Hi, this is my first post!
I have a Samsung GT-S5360 smartphone , untouched (with official firmware). Gingerbread 2.3.6 (latest firmware).
For some reasons i want to reinstall firmware via Kies, not from Odin... Is that possible?
I followed this method but dont work becouse it is for Galaxy S3 Smartphone: http://forum.xda-developers.com/galaxy-s3/general/guide-how-to-reinstall-stock-firmware-t1978840
Kies shows me : Error - GT-S5360 does not support initialization
I have original USB Cable and latest kies.
Thanks for reading and sorry for my bad english!
Click to expand...
Click to collapse
You can but it's harder than flashing via odin. Odin just need less than a minute
You must use Odin.
Kies does not support Galaxy y
Thanks all you guys for help!
I will try odin
Ancie
I cant do with odin. I have downloaded Odin3 V3.09, official firmware from sammobile "S5360_XXMC2_OXFMC1_XXMC2", all drivers are installed correctly but when i put the S5360_XXMC2_OXFMC1_XXMC2 file into "AP" it odin stuck at "Leave CS.." . I have tried older odin (3.07, 1.85, 1.84) Same problem again. Tried on different usb ports/computer and nothing. Where can i download the original firmware (3 files "csc-modem-pda" not 1 as sammobile firmwares) for my GT-S5360 ?
Here it is a broken link from samsung-updates samsung-updates.com/details/13437/Galaxy_Y/GT-S5360/ALB/S5360XXMC2.html
Thanks!
Sorry for bad english.
sarlind said:
I cant do with odin. I have downloaded Odin3 V3.09, official firmware from sammobile "S5360_XXMC2_OXFMC1_XXMC2", all drivers are installed correctly but when i put the S5360_XXMC2_OXFMC1_XXMC2 file into "AP" it odin stuck at "Leave CS.." . I have tried older odin (3.07, 1.85, 1.84) Same problem again. Tried on different usb ports/computer and nothing. Where can i download the original firmware (3 files "csc-modem-pda" not 1 as sammobile firmwares) for my GT-S5360 ?
Here it is a broken link from samsung-updates samsung-updates.com/details/13437/Galaxy_Y/GT-S5360/ALB/S5360XXMC2.html
Thanks!
Sorry for bad english.
Click to expand...
Click to collapse
if you download firmware from sammobile you need to split the firmware using splitfus2
however - as im amazing iv already split firmware for you and iv written a guide on using splitfus2 if the firmware you want isnt on my thread
all links as usual are in my signature or click
http://forum.xda-developers.com/showthread.php?t=2568853
to goto my firmware thread
Odin is easy formula Just downloads the firmware given the given link by sir marcussmith flow the instruction one by one
Thanks marcussmith!! Everything works like a charm. Now i can use my S5360 as new Thanks!
Seeking help
Dear Sarlind
I want to reinstall firmware for my GT-S5360 smart phone from Odin. Please give me link to accomplish it. You got it from Mr.Marcus Smith
mobin.ee said:
Dear Sarlind
I want to reinstall firmware for my GT-S5360 smart phone from Odin. Please give me link to accomplish it. You got it from TheFixItMan
Click to expand...
Click to collapse
Look 3 posts above yours or top of Dev section
hey guys,
i tried the new rom by civato, for this i flashed the NE6 bootloader. the rom didn't work as expected (no data) so i tried to restore the stock rom NB7 via odin.
odin said succes, but the phone did not boot. i flashed cwm and flashed som roms from there, but i always got a freeze/bootloop, even after factory reset.
so i tried a full new flash with nand erase all. flash succeded, but i could not boot.
then i downloaded the N9005ZHUENE6 firmware from hongkong and tried to flash it, but odin always fails. now i get the "firmware upgrade encountered an issue." message and can't do anything with the phone anymore.
Can you please help me?
thank you in advance!
edit: problem solved, the NE4 pit file from sajjjjjjad did the job!
uluf said:
hey guys,
i tried the new rom by civato, for this i flashed the NE6 bootloader. the rom didn't work as expected (no data) so i tried to restore the stock rom NB7 via odin.
odin said succes, but the phone did not boot. i flashed cwm and flashed som roms from there, but i always got a freeze/bootloop, even after factory reset.
so i tried a full new flash with nand erase all. flash succeded, but i could not boot.
then i downloaded the N9005ZHUENE6 firmware from hongkong and tried to flash it, but odin always fails. now i get the "firmware upgrade encountered an issue." message and can't do anything with the phone anymore.
Can you please help me?
thank you in advance!
Click to expand...
Click to collapse
Head over to the HK thread(s) and see how to restore back to normal with Hong Kong variants it's a little different (you do have a HK version I assume? and not just risked an HK FW flash?)--- You can flash via ODIN again even with that error on the device.
radicalisto said:
Head over to the HK thread(s) and see how to restore back to normal with Hong Kong variants it's a little different (you do have a HK version I assume? and not just risked an HK FW flash?)--- You can flash via ODIN again even with that error on the device.
Click to expand...
Click to collapse
Is there a difference between the international N9005 and the HK variant? my N9005 is from germany. i flashed the german firmware again and the error is gone, but the device is still in the bootloop..
uluf said:
Is there a difference between the international N9005 and the HK variant? my N9005 is from germany. i flashed the german firmware again and the error is gone, but the device is still in the bootloop..
Click to expand...
Click to collapse
Very slightly yes. More to do with some HK Software issues, that's the only N9005 firmware which shouldn't/can't be flashed on every device model N9005 - regarding your bootlooping.
Grab a PIT file, sort out what firmware you use and match them, then flash via Odin, there are a few guides and it's pretty straightforward, however you need to read properly or you risk a hard-brick.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
radicalisto said:
Very slightly yes. More to do with some HK Software issues, that's the only N9005 firmware which shouldn't/can't be flashed on every device model N9005 - regarding your bootlooping.
Grab a PIT file, sort out what firmware you use and match them, then flash via Odin, there are a few guides and it's pretty straightforward, however you need to read properly or you risk a hard-brick.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I flashed the latest DBT firmware a couple of times, with a PIT file and without, with full nand erase and without. Odin always says passed but i get no boot sound and the device gets stuck at the boot animation.
I think the problem could be the NE6 bootloader i flashed, but if i flash the NE6 again after i flashed the NB7 firmware it doesn't boot either. Is it possible to downgrade the bootloader to another KitKat firmware?
uluf said:
I flashed the latest DBT firmware a couple of times, with a PIT file and without, with full nand erase and without. Odin always says passed but i get no boot sound and the device gets stuck at the boot animation.
I think the problem could be the NE6 bootloader i flashed, but if i flash the NE6 again after i flashed the NB7 firmware it doesn't boot either. Is it possible to downgrade the bootloader to another KitKat firmware?
Click to expand...
Click to collapse
try flashing the latest NE5 for the phillipines, that is for your model with correct pit file and i think your phone will be alive again
alom5 said:
try flashing the latest NE5 for the phillipines, that is for your model with correct pit file and i think your phone will be alive again
Click to expand...
Click to collapse
thanks for the tip, do you have a source for the NE5? i can't find a download for this.
You can use www.sammobile.com/firmwares.
Make sure you have the correct pit file as you changed it to the hk version before
Sent from my SM-N9005 using Tapatalk
on this site i can't find a NE5 version. i flashed the ND6, device didn't boot.
so i tried to flash cwm, worked fine. then i was able to install and boot the latest cm11, but the baseband, min, prl-version, meid, imei and iccid are shown as unknown. so i tried to restore the efs backup i made via terminal emulator, it looks like it worked but when i reboot nothing changed.
any other ideas?
alom5 said:
try flashing the latest NE5 for the phillipines, that is for your model with correct pit file and i think your phone will be alive again
Click to expand...
Click to collapse
Sorry for bursting here >>> and Just to make sure
If I'm on the N9005XXUEND6 ( btw the best Firmware so far).....the new Hong Kong PDA: N9005ZHUENE6
is not 100% safe/compatible ?
My phone is the international version
:good:
hi
i have this problem too!(Downgrade baseband)
http://forum.xda-developers.com/showthread.php?p=53111058
when i downgrade to nd4 imei set to null null and ....
Hong Kong ROM is Only for 16gb N9005 !!!!!!!
you'r bootloader upgpraded to NE6 and You most downgrade to ne4
i export pit file from ne4:
https://mega.co.nz/#!T4YgnaYL!-FBDWMpBpTUWCmYDpGfBqaM26ZH9HK_u7SuRB3xoF0Q
try to flash 4 file rom ne4 with my pit file.
Hong Kong firmware is not for the international version. Hk phone is 16gb only and had different partition. So don't bother with it.
There is the NE5 firmware on sammobile site. I downloaded it from there. ..
Is pda NE4 csc NE5
Sent from my SM-N9005 using Tapatalk
sajjjjjjad said:
hi
i have this problem too!(Downgrade baseband)
http://forum.xda-developers.com/showthread.php?p=53111058
when i downgrade to nd4 imei set to null null and ....
Hong Kong ROM is Only for 16gb N9005 !!!!!!!
you'r bootloader upgpraded to NE6 and You most downgrade to ne4
i export pit file from ne4:
https://mega.co.nz/#!T4YgnaYL!-FBDWMpBpTUWCmYDpGfBqaM26ZH9HK_u7SuRB3xoF0Q
try to flash 4 file rom ne4 with my pit file.
Click to expand...
Click to collapse
thanks for the pit file, i'm downloading the NE4 right now, but as a one file version. do you know where i can get the 4 file rom? i only find the 1 file versions.
THANK YOU! with your pit file, it worked again!
http://forum.xda-developers.com/showthread.php?t=2774970
hey guys i think that i had the same problem with you . i updated my bootloader and my modem as civato said and now imei null and baseband unknown . can you help me how to fix this . thanx in advance
Ι fixed it too
Misterjunky said:
If your baseband is NB4/ND4/NE6 then you cannot downgrade however you can
upgrade if when any updates are available.
Good luck!
Click to expand...
Click to collapse
upgrade if when any updates are available.
Please I own a SM-910H version of the Galaxy Note 4. I tried to flash the N5 ported Sixperience rom but I was experiencing a bootloop because my bootloader wasn't a lollipop 5.1.1 bootloader. I downloaded the 5.1.1 bootloader (910HXXU1COH4) and for some unknown reason I'm not able to flash via odin. It fails whenever it gets to "sboot.bi". I tried flashing the stock firmware, both lollipop 5.0.2 and 5.1.1 but they all fail when it gets to "sboot.bin". But I'm able to flash Recoveries and 910HXXU2COJ4 bootloader.
I reverted back to stock kernel and recovery and still didn't solve the problem. I tried to flash CyanogenMod 12.1 via recovery it also didn't work.
Please I need help to fix this problem because I'm afraid it might affect me in the coming months if I want to flash android 6.0 Marshmallow.
Below are the information on my phone frmware
from the photo of odin this is n910c bootloader
Yea. When all else was failing then I tried that one too.
I think my thread is in the wrong forum. I'm moving it to the Help and Troubleshooting forum.
GeePrhyme said:
Yea. When all else was failing then I tried that one too.
I think my thread is in the wrong forum. I'm moving it to the Help and Troubleshooting forum.
Click to expand...
Click to collapse
You shouldn't flash other variant bootloader. Your phone it's rooted?
pmzerdan said:
You shouldn't flash other variant bootloader. Your phone it's rooted?
Click to expand...
Click to collapse
Yes. My phone is rooted.
try to flash stock firmware 4 files
am_dark said:
try to flash stock firmware 4 files
Click to expand...
Click to collapse
The firmware I downloaded has only one tar file when extracted.
GeePrhyme said:
The firmware I downloaded has only one tar file when extracted.
Click to expand...
Click to collapse
there are some methods for splitting the file, or you could re download a 4 file rom
I know this problem you have to download another firmware
Try this on sammobile
Model SM-N910H
Model name GALAXY Note 4
Country Unknown
Version Android 5.1.1
Changelist 6108267
Build date Wed, 28 Oct 2015 11:49:42 +0000
Product code MRU
PDA N910HXXU2COJ4
[email protected] said:
I know this problem you have to download another firmware
Try this on sammobile
ModelSM-N910H
Model nameGALAXY Note 4
CountryUnknown
VersionAndroid 5.1.1
Changelist6108267
Build date Wed, 28 Oct 2015 11:49:42 +0000
Product codeMRU
PDA N910HXXU2COJ4
Click to expand...
Click to collapse
I'll try and see then.
there is firmware 4 files but android ver. 4.4.4
Hi, I don't speak English, but I try to help you.
I have this problem two weeks ago.
So here in xda I found a thread with the solution.
I can't remember the name of program but maybe anyone can tell you.
The program "decompile" or "decompress" (I don't know exactly) the tar file.
So then you delete the sboot.bin and "recompile" (or whatever the program do) the tar and re flash with Odin and the "new" tar file.
This work for me.
Hope you can understand my poor help.
Good luck!
I search and search but can't find the post.
But find this thread
http://forum.xda-developers.com/galaxy-s6-edge/help/s6-edge-g925f-odin-flashing-problem-t3141455
And someone say this
"extract the firmware.. Than delete the file from the folder
use the new multitool in development thread to ma Ke a
new tar for Odin.. And flash"
So, I think this "multitool" is the program I used.
Is a DOS interface program.
[email protected]@---------------
Edit:
Look at this thread too I'm on my phone, so I can't test the program.
http://forum.xda-developers.com/showthread.php?t=2446269&page=7