Database Users

Miui? Is it possible

Is there any chance that someone could port/create a miui rom for a500. Obviously v4 so it wouldn't be back tracking to gingerbread. I would think it possible since we have ics working,
Sent from my A500 using xda premium

this thread should be posted in general section, or Q&A section, not a new thread in development.
Sent from my A500 using XDA

@lifecoding, hum? well the porting of MiUi is related to a development question more than an general question... whatever...
@warfenix : the Patchcode is available for MIUI, I think so it possible to be ported.

but since its a question, well then how about q&a?......whatever
Sent from my Iconia A500 using Tapatalk

I think its possible, yes, but you need to find a dev who wants to port it across. That might be the difficult bit...

Seems we need an ASOP rom, or CM ROM running on the tablet, then replace some files... well seems easy to say but dunno about when need to be done...
I will not risk my tablet right now, I need it for work

Hell im game to test, a different rom wouldnt be bad, variety is what the a500 needs...

get an ipad

sanaell said:
@lifecoding, hum? well the porting of MiUi is related to a development question more than an general question... whatever...
@warfenix : the Patchcode is available for MIUI, I think so it possible to be ported.
Click to expand...
Click to collapse
um he's asking a question, not posting a rom, tutorial, kernel, ect... which is what development section is for.
So uh, belongs in Q&A. Next time think before you type and read xda rules and guidelines.
But.. whatever..
Sent from my A500 using XDA

robkoehler said:
get an ipad
Click to expand...
Click to collapse
Miui is much more than an iPad. Yes an miui port is possible and "may" being worked on right now. I ported the miui rom to the pyramid for many months and have considered doing one on the A500. But miui is heavily cyanogenmod based. Once cm9 is established on the tablet there are many possibilities for roms. But getting there is the hard part and I am greatful for the people who are working on cm9 for the iconia.
Sent from a Hell Hound hoped up on AOKP!!!

sanaell said:
Seems we need an ASOP rom, or CM ROM running on the tablet, then replace some files... well seems easy to say but dunno about when need to be done...
I will not risk my tablet right now, I need it for work
Click to expand...
Click to collapse
I already tried porting it using this guide. Unfortunately it didn't boot - reached MIUI boot screen and that was all. I used Tegraowners ROM 144 as a base(AOSP based) and MIUI 2.4.6 ROM - tried from several deviced with no luck. I see arrom1983 managed to boot MIUI on Galaxy 10.1" tab - see this thread....but there are no updates on the progress apparently.
robkoehler said:
get an ipad
Click to expand...
Click to collapse
robkoehler, sorry my friend but this is completely wrong. Please don't start another flame war about MIUI being the same as iStuff. You can replace default MIUI launcher and still have MIUI functionality that is way better than Android's default . Other that that, there are plethora of features I could count if you want me to.

lifeofcoding said:
this thread should be posted in general section, or Q&A section, not a new thread in development.
Sent from my A500 using XDA
Click to expand...
Click to collapse
Are you a moderator? No? oh. Then step off your high horse and start trying to be helpful.
If XDA wants it moved, they'll move it and put a small comment as to why it was moved.

The Unofficial CyanogenMod Series - added aokp-jellybean test build

Hi all I will be working this a little. But don't expect anything to great. I don't have a whole lot of time to work on this. I bricked my phone and not having much luck getting it replaced. So I won't be working on this to much until I can get a new phone as I will be spending all my time working.
Most stuff posted here is probably gonna be untested.
I will be posting cm7, cm9, and cm10 builds here.
Idk if any of these work.
Don't get mad at me if they brick your device. Infact treat them with a high chance of brickage, unless otherwise noted.
CyanogenMod 7:
Code:
[CENTER]
[B][U][COLOR="Blue"][SIZE="2"]Download:[/SIZE][/COLOR][/U][/B]
[URL="https://www.dropbox.com/s/1ct15i6fxbprpjj/cm-7-20120720-UNOFFICIAL-captivatemtd.zip"]cm-7-20120720-UNOFFICIAL-captivatemtd.zip[/URL]
[B][U][SIZE="2"][COLOR="Blue"]Google Apps for Gingerbread:[/COLOR][/SIZE][/U][/B]
[URL="http://goo.im/gapps/gapps-gb-20110828-signed.zip"]gapps-gb-20110828-signed.zip[/URL][/CENTER]
CyanogenMod 9:
Code:
[CENTER][B][U][COLOR="Blue"][SIZE="2"]Downloads:[/SIZE][/COLOR][/U][/B]
[URL="https://www.dropbox.com/s/p0n6myyedm7pyx4/cm-9-20120720-UNOFFICIAL-captivatemtd.zip"]cm-9-20120720-UNOFFICIAL-captivatemtd.zip[/URL]
[B][U][SIZE="2"][COLOR="Blue"]Google Apps for ICS:[/COLOR][/SIZE][/U][/B]
[URL="http://goo.im/gapps/gapps-ics-20120429-signed.zip"]gapps-ics-20120429-signed.zip[/URL][/CENTER]
CyanogenMod 10:
Code:
[CENTER][B][U][COLOR="Blue"][SIZE="2"]Download:[/SIZE][/COLOR][/U][/B]
[URL="http://www.mediafire.com/?ndt440n4ux0ctaz"]cm-10-20120727-UNOFFICIAL-captivatemtd.zip[/URL]
[B][U][COLOR="Blue"][SIZE="2"]Old builds:[/SIZE][/COLOR][/U][/B]
[URL="http://www.mediafire.com/?2n75vev3qvcl417"]cm-10-20120723-UNOFFICIAL-captivatemtd.zip[/URL]
[URL="http://www.mediafire.com/?d89z35acc2cpaxr"]cm-10-FIXED_RECOVERY-captivatemtd.zip[/URL]
[SIZE="2"][B][U][COLOR="Blue"]Google Apps for JellyBean:[/COLOR][/U][/B][/SIZE]
[URL="http://goo.im/gapps/gapps-jb-20120726-signed.zip"]gapps-jb-20120726-signed.zip[/URL]
[URL="http://www.mediafire.com/?xje9p4hl1qv56qz"]inverted_gapps2-jb-20120715.zip[/URL]
[/CENTER]
Recovery:
Code:
[CENTER][B][U][SIZE="2"][COLOR="Blue"]Fake Flashes:[/COLOR][/SIZE][/U][/B]
Touch recovery 6 Fake flash: [URL="http://www.mediafire.com/?k240g28o332apgy"]touch_recovery_fake_flash.zip[/URL]
This is a preview most ways to navigate doesn't work. Normal recovery functions work though
Thanks to:
[URL="http://forum.xda-developers.com/member.php?u=2492461"]sk8erwitskil[/URL] for the source
[/CENTER]
Install instructions:
Code:
[CENTER]Make a backup......
Factory reset........
Mounts and storage > format system.......
Advanced > Wipe Dalvik Cache.......
Install Rom......
Install gapps.....
Reboot......
Go to Rom Manager and fix permissions......
Reboot......
Your all set.........[/CENTER]
Upgrading From a Previous Version:
Code:
[CENTER]Reboot to Recovery
Go to mounts and storage and format system...
Flash latest rom....
If coming from a different build like from cm9 to cm10
then follow the install instructions
When going from cm10 to cm10 flash latest cm10 zip
When going from cm9 to cm9 flash latest cm9 zip[/CENTER]
AOKP- JellyBean test build
Code:
[CENTER][SIZE="3"][B][U]Download:[/U][/B][/SIZE] [URL="http://www.mediafire.com/?9eud3x8c4pq4atd"]
AOKP-JB-captivate-b1.zip[/URL]
[SIZE="3"][B][U]Doesn't work:[/U][/B][/SIZE]
Rom Control force closes Settings
Messaging force closes
Still being tested. Please provide feedback[/CENTER]

cm7 builds:
cm-7-20120720-UNOFFICIAL-captivatemtd.zip
gapps-gb-20110828-signed.zip
Click to expand...
Click to collapse
what's different from Official version this unofficial version?
p.s: sorry for my english

Someone please confirm but I thought releases weren't supposed to be put on xda without the op having a device to test it on? Just curious...
Sent from my SGH-I897 using xda premium

I have this device. I bricked my skyrocket
Sent from my SGH-I897 using Tapatalk 2

levanr said:
what's different from Official version this unofficial version?
p.s: sorry for my english
Click to expand...
Click to collapse
I'm not sure. I just like making my own builds and I figured I'd post them.
Sent from my SGH-I897 using Tapatalk 2

levanr said:
what's different from Official version this unofficial version?
p.s: sorry for my english
Click to expand...
Click to collapse
"unofficial" is beta version that has some problem, "official" is perfect version that has no problem.

gmillz said:
Hi all I will be working this a little. But don't expect anything to great. I don't have a whole lot of time to work on this. I bricked my phone and not having much luck getting it replaced. So I won't be working on this to much until I can get a new phone as I will be spending all my time working.
Most stuff posted here is probably gonna be untested.
I will be posting cm7, cm9, and cm10 builds here.
Idk if any of these work.
Don't get mad at me if they brick your device. Infact treat them with a high chance of brickage, unless otherwise noted.
Click to expand...
Click to collapse
-Downloading
If they wont work... you need a logcat or something .. am I right ?

How to install: ?
Features: ?
Sent from my GT-I9000 using xda premium

Are these the same available on get.cm?

unnecessary (sorry)
Sent from my GT-I9000 using Tapatalk 2

Gore785 said:
How to install: ?
Features: ?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
if you dont understand how to install please leave the area lol

What's the point of this thread?
CheesyNutz said:
if you dont understand how to install please leave the area lol
Click to expand...
Click to collapse
I've honestly lost count of all your posts that offer absolutely nothing helpful or relevant to the discussion.

I understand theres not much of a point to this. The main reason for this thread is cm10 as all the other cm10 roms don't have the stock cm kernel. But since I build the other ones anyways i figured I'd post them. And I'll post install instructions.

kevinnol said:
-Downloading
If they wont work... you need a logcat or something .. am I right ?
Click to expand...
Click to collapse
Definitely. Logcats would be great

CheesyNutz said:
if you dont understand how to install please leave the area lol
Click to expand...
Click to collapse
Meant that as in anything we should do in specific before, during, or after install Like fix permissions?
Sent from my GT-I9000 using xda premium

johnnyrichter said:
What's the point of this thread?
I've honestly lost count of all your posts that offer absolutely nothing helpful or relevant to the discussion.
Click to expand...
Click to collapse
gmillz said:
I understand theres not much of a point to this. The main reason for this thread is cm10 as all the other cm10 roms don't have the stock cm kernel. But since I build the other ones anyways i figured I'd post them. And I'll post install instructions.
Click to expand...
Click to collapse
So...if you understand there's not much of a point, why post at all? Also, FYI, in regard to your OP: "to" is not the same as "too", and "infact" is not a word. Just sayin'.

adzidek said:
So...if you understand there's not much of a point, why post at all? Also, FYI, in regard to your OP: "to" is not the same as "too", and "infact" is not a word. Just sayin'.
Click to expand...
Click to collapse
Because this is the only cm10 rom with the stock cm kernel. I meant there was not much reason to post any of the other builds

gmillz said:
Because this is the only cm10 rom with the stock cm kernel. I meant there was not much reason to post any of the other builds
Click to expand...
Click to collapse
You'll likely receive a lot of flak over re-hosting/posting stuff as you've seen thus far, but if you're offering something you've re-worked in any way(which is what I understand you're doing) then I'd stick with just that and link to other threads in your OP if necessary.

If you compiled from CM10 source here we have CM10 kernel for Captivate (no datadata partition).
This is very interesting.
Thank you very much: if compiling went well this is really an important step for JB on Cappy and now we can run also official Pawitp builds.

Monfro said:
If you compiled from CM10 source here we have CM10 kernel for Captivate (no datadata partition).
This is very interesting.
Thank you very much: if compiling went well this is really an important step for JB on Cappy and now we can run also official Pawitp builds.
Click to expand...
Click to collapse
Yes this is compiled from source specifically for the captivate.
And compiles with no errors

[ROM] Unofficial CM10 for the A500/A501

WARNING: THIS IS SUPER EXPERIMENTAL!!! DON'T FLASH THIS TO YOUR TABLET IF YOU DON'T KNOW WHAT YOU ARE DOING!!!
What works:
Wi-Fi
Touchscreen
Browser
Play Store
SuperSU & Root access
Lots of other stuff, just haven't tested it quite yet.
What dosen't:
Media (Video & Sound)
/mnt/sdcard and /sdcard point to external sd, not internal memory.
Bootloop fixed in 7/25/12 build!
You tell me
This also requires the unlocked ICS bootloader. This will not run on the honeycomb bootloader. ICS bootloader installation instructions: http://forum.xda-dev...d.php?t=1622425
Download ROM (Updated 7/25/12)
Download gapps
Thanks to these guys and these guys.

jellybellys said:
Don't feel like posting everything here, so here:
ALL INFO & DOWNLOADS
Click to expand...
Click to collapse
Why don't we use the already existing one on the forums here?
http://forum.xda-developers.com/showthread.php?t=1792618
Seems more developed, and doesn't bootloop?

I'm fine with different versions of ROMs, but you guys should team up with the cm10 development we have going on here with some developers with great talent, waydownsouth, randomblame, gh123man and others.
EDIT:
This is the same work as the current cm10 ROM on the forums, this should be deleted for duplicate ROM posted.
Sent from my A500 using xda app-developers app

lifeofcoding said:
I'm fine with different versions of ROMs, but you guys should team up with the cm10 development we have going on here with some developers with great talent, waydownsouth, randomblame, gh123man and others.
EDIT:
This is the same work as the current cm10 ROM on the forums, this should be deleted for duplicate ROM posted.
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
This is a different ROM from theirs.
Currently working on getting it running better. Next build should have a lot of fixes.

Oh, well I said that be cause you give credit to this:
https://github.com/iconia-dev
Which is the work of the same people making the other current cm10 ROM.
Unless you plan on improving and fixing you're self..
Sent from my A500 using xda app-developers app

3G Modem for A501 is working too?

Lmao thinkm this thread has been dis-owned and someone has red face lmao

*yourself
lifeofcoding said:
Oh, well I said that be cause you give credit to this:
Unless you plan on improving and fixing you're self..
Click to expand...
Click to collapse

jellybellys said:
WARNING: THIS IS SUPER EXPERIMENTAL!!! DON'T FLASH THIS TO YOUR TABLET IF YOU DON'T KNOW WHAT YOU ARE DOING!!!
Click to expand...
Click to collapse
Somehow I started having flashbacks to the days of the "Manhattan Project".
But alas.... No fireworks or major explosions. Not even a small flicker..... :crying:
Considering the lack of any other input from the OP, I'll put in a close or delete order.

D3v17 said:
3G Modem for A501 is working too?
Click to expand...
Click to collapse
I seriously doubt it Why it's labeled for the 501, I can only wonder.....
MD

Moscow Desire said:
I seriously doubt it Why it's labeled for the 501, I can only wonder.....
MD
Click to expand...
Click to collapse
Yes i also doubt
Before i ever test flash rom JB another thread, and 3G Modem for A501 not working. Only wifi is working.
Thx
Sent from my A501 using XDA Premium HD app

please dont advertise a501 compat when 3g isnt functionnal. a501 users already have a hard time looking through this a500 forum --;

jellybellys said:
This is a different ROM from theirs.
Currently working on getting it running better. Next build should have a lot of fixes.
Click to expand...
Click to collapse
How different? Any changelog?

i seriously think this is useless

Withdrawl from Flash Fix

I need my fix of flashing a ROM. Have not had a new one in a few weeks LOL

Why is this in the development section?
Sent from my Nexus 7 using XDA Premium HD app

This thread should and will probably get moved but have you tried mamarley's ICS CM9 ROM? It's really smooth for ICS. It just loads apps a bit slower. He builds quite often.

tiny4579 said:
This thread should and will probably get moved but have you tried mamarley's ICS CM9 ROM? It's really smooth for ICS. It just loads apps a bit slower. He builds quite often.
Click to expand...
Click to collapse
The Linaro Rom? Yes I have tried it and it is very smooth

kevman8396 said:
I need my fix of flashing a ROM. Have not had a new one in a few weeks LOL
Click to expand...
Click to collapse
What are you developing besides a headache for me?
Read forum rules and stickies before posting
Thread moved
FNM

[Dev] Cm11 Discussion for Atrix 4G

Hey,
Im on vacation, so i decide to learn hot to build from sources.
Im stuck on some compilation problems but xda university is giving some aid.
Here some interesting github.
Schichu(Tegra 2 lead developer cm11)
https://github.com/Schischu
My intention is to open a discussion thread for we to move forward and help each other to bring more advanced stuff to these poor phone.

pedrocel85 said:
Hey,
Im on vacation, so i decide to learn hot to build from sources.
Im stuck on some compilation problems but xda university is giving some aid.
Here some interesting github.
Schichu(Tegra 2 lead developer cm11)
https://github.com/Schischu
My intention is to open a discussion thread for we to move forward and help each other to bring more advanced stuff to these poor phone.
Click to expand...
Click to collapse
You might be interested in the thread on system partitioning. It is in dev section near the top

I've built, but I do not fail to start

fengyr said:
I've built, but I do not fail to start
Click to expand...
Click to collapse
I do not fail to start? You mean it works?
Sent from my MB886 using xda app-developers app

palmbeach05 said:
I do not fail to start? You mean it works?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
I built 4.4 can not start on atrix.

fengyr said:
I built 4.4 can not start on atrix.
Click to expand...
Click to collapse
Built but no boot. Ok
Sent from my MB886 using xda app-developers app

I am just curious. Are you installing rom via fastboot or recovery?

anyone have 4.4 working on atrix 4g?
Has anyone got 4.4 to boot on atrix i heard you need an updated cwm recovery so i have 6.0.4.7 recovery now so if any new info plz post. Willing to test if anyone has a build

Ok to reword my last post so no confusion. I am not asking for a finished shiny new rom to play with i am offering my device to test the things any dev has on atrix 4g regarding cm11 i also know from reading other posts that the older cwm recovery doesnt play well with cm11 i couldnt even get itvto flash 4.3.1 so had to update to 6.0.4.7 sorry getting off subject but as someone here posted they got it to install but no boot well would the recovery have anythingvto do with that. I want to learn alot more then i know but no pc right now when i do get one i will get more into this so i can contribute my knowledge as well. Thanks in advance to any response

Mikeyd7186 said:
Ok to reword my last post so no confusion. I am not asking for a finished shiny new rom to play with i am offering my device to test the things any dev has on atrix 4g regarding cm11 i also know from reading other posts that the older cwm recovery doesnt play well with cm11 i couldnt even get itvto flash 4.3.1 so had to update to 6.0.4.7 sorry getting off subject but as someone here posted they got it to install but no boot well would the recovery have anythingvto do with that. I want to learn alot more then i know but no pc right now when i do get one i will get more into this so i can contribute my knowledge as well. Thanks in advance to any response
Click to expand...
Click to collapse
I too am willing to offer my Atrix for testing. But will as soon as we have a stable 3.1.10 kernel.

To correct myself i have cwm 6.0.4.6 not 6.0.4.7 sorry for the mistake
Sent from my MB860 using xda app-developers app

even if you manage to build a proper cm11 rom for atrix, there are still kernel issues to be solved. My personal advice is to work on kernel adjustments and tweaks (or whatsoever.)

Let me preface this by saying that I'm not a dev. However the problem as I see it is that you're working on a kernel for an older version of android. Why not just go around the problem and try to make it work with the newer version instead? I mean when it works fully it most likely won't work with KitKat right away anyway right?

Scary Guy said:
Let me preface this by saying that I'm not a dev. However the problem as I see it is that you're working on a kernel for an older version of android. Why not just go around the problem and try to make it work with the newer version instead? I mean when it works fully it most likely won't work with KitKat right away anyway right?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=51386363&postcount=2006

Hey guys! There is a discussionhttp://forum.xda-developers.com/atrix-4g/development/rom-cm-11-android-4-4-4-atrix-bigpart-t2847281 about it already.
Sent from my MB860 using XDA Free mobile app

Reported.
This thread is older than the one in development section
Enviado desde mi Moto X usando Tapatalk 2